Search Results

Search found 1808 results on 73 pages for 'hot spare'.

Page 24/73 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • Does anyone own a compaq 610? Fan Issues.

    - by Dave
    Hi, I've just purchased 2 HP compaq 610s and both have the same problem, that the fan is constantly on and the base is fairly hot. HP assures me that this is unusual and that I should return them as DOA. Becasue both laptops have this issue, I think that it may be a design flaw rather than a one off problem. Can any 610 owners comment? Is their fan constantly on too?

    Read the article

  • Raid 11 : how to stop @ how to release devices

    - by santhosha
    #cat /proc/mdstat md7 : active raid10 sdh1[2] 286743936 blocks 64K chunks 2 near-copies [4/1] [__U_] [0:0:3:0] #mdadm -f /dev/md7 /dev/sdh1 mdadm: set /dev/sdh1 faulty in /dev/md7 #mdadm -r /dev/md7 /dev/sdh1 mdadm: hot remove failed for /dev/sdh1: Device or resource busy # umount /dev/md7 umount: /dev/md7: not mounted #mdadm --stop /dev/md7 mdadm: fail to stop array /dev/md7: Device or resource busy #cat /proc/mdstat md7 : active raid10 sdh1[2] 286743936 blocks 64K chunks 2 near-copies [4/1] [__U_] [0:0:3:0]

    Read the article

  • Dell PowerEdge Server BitLocker Hotswap Hard disks

    - by JoshODBrown
    We have a Windows 2008 R2 Server running on a Dell PowerEdge R310 Server with Bitlocker enabled. There are two physical Hard disks configured as RAID 1. One of the disks recently started having an issue, so we have now have a warranty covered replacement for it, But we were curious if there will be any issues hot swapping the new drive in due to BitLocker being enabled? Has anyone had a similar experience with scenario?

    Read the article

  • Install SAS/SATA backplane in Dell PowerVault 220S

    - by e151280
    Is the backplane of a Dell PowerVault 220S svc tag 3sdpcb1 (14 drive, 80 pin hot swap scsi) upgradeable to a SAS/SATA backplane & controller card replacement? The unit already seems to be quite modular, with slide-out replaceable scsi controllers/connectors on the back, and slide out redundant power supplies. With everything else so modular, the backplane would seem to be the next logically upgradeable part of this unit. Thanks in advance for your input

    Read the article

  • MSMQ Resilience

    - by Paddy Carroll
    I have a requirement for a resilient MSMQ setup on VMWare ESX5. I am aware that we cannot allow the queue storage to be shared as it must be installed on physical disk mount, e.g. it cant be an CIFS or DFS Share. The following constraints apply: We don't use windows clustering We dont't rely on hot standbys Is there a way I can replicate the queue storage to another platform so that it can assume MSMQ duties on failure of the primary platforms using any method including queue forwarding?

    Read the article

  • Reduce Mac OS X's Flash CPU usage

    - by elhombre
    I have been experiencing high CPU usage (138%) on my MacBook, while looking at flash videos on the internet with the Firefox browser. Mostly this usage makes itself noticeable by the loud noise of the fans and a hot MacBook which is very annoying for me. Does anyone know how to solve this problem or a workaround in of any kind?

    Read the article

  • Areca 1280ml RAID6 volume set failed

    - by Richard
    Today we hit some kind of worst case scenario and are open to any kind of good ideas. Here is our problem: We are using several dedicated storage servers to host our virtual machines. Before I continue, here are the specs: Dedicated Server Machine Areca 1280ml RAID controller, Firmware 1.49 12x Samsung 1TB HDDs We configured one RAID6-set with 10 discs that contains one logical volume. We have two hot spares in the system. Today one HDD failed. This happens from time to time, so we replaced it. Upon rebuilding a second disc failed. Normally this is no fun. We stopped heavy IO-operations to ensure a stable RAID rebuild. Sadly the hot-spare disc failed while rebuilding and the whole thing stopped. Now we have the following situation: The controller says that the raid set is rebuilding The controller says that the volume failed It is a RAID 6 system and two discs failed, so the data has to be intact, but we cannot bring the volume online again to access the data. While searching we found the following leads. I don't know whether they are good or bad: Mirroring all the discs to a second set of drives. So we would have the possibility to try different things without loosing more than we already have. Trying to rebuild the array in R-Studio. But we have no real experience with the software. Pulling all drives, rebooting the system, changing into the areca controller bios, reinserting the HDDs one-by-one. Some people are saying that the brought the system online by this. Some are saying that the effect is zero. Some say, that they blew the whole thing. Using undocumented areca commands like "rescue" or "LeVel2ReScUe". Contacting a computer forensics service. But whoa... primary estimates by phone exceeded 20.000€. That's why we would kindly ask for help. Maybe we are missing the obvious? And yes of course, we have backups. But some systems lost one week of data, thats why we'd like to get the system up and running again. Any help, suggestions and questions are more than welcome.

    Read the article

  • CPU Temp Advise

    - by compu
    I have a AMD X2 64 7750BE,my system bios show my CPU temp is at 64 degrees centigrade(64C).is it too hot.MY CPU fan RPM is 2355,is the rpm speed normal..please advise Thanks in advance

    Read the article

  • MacBook OS X connections

    - by tom ryan
    I got this old MacBook from my son. The wireless internet shuts down. Is it possible that it happens because my battery is dead? (deceased) It works fine for about a half hour, then when it gets hot it refuses to stay on line.

    Read the article

  • PC monitors shut off and system hangs while playing 3D games, but sound continues - Diagnosis?

    - by Jon Schneider
    Two days ago, I started running into a problem with my Windows PC: The PC's two connected monitors simultaneously lose signal and go black (as though the PC had been powered off). The keyboard's Numlock, Capslock, and Scroll Lights will become "stuck" in their current positions, as though the PC is hung. (For example, the Numlock light on the keyboard remains lit regardless of me pressing the Numlock key repeatedly.) No keyboard input does anything. (Ctrl+Alt+Del, Ctrl+Shift+Esc, Ctrl+C, etc.) However -- Whatever sound/music the PC was playing continues to play, and the PC's fans continue running, so the PC hasn't powered itself off or rebooted itself. Opening up the case, the graphics card is pretty hot to the touch. I had this happen 3 times in one evening. In all cases, I was playing a game with 3D graphics when the problem occurred (Torchlight, Minecraft, Magic: The Gathering 2012, Avadon: The Black Fortress demo). I have yet to have the problem happen when I'm not playing a game. This system has been running stable for about 2.5 years prior to this. I didn't make any changes to the system prior to the problem starting to occur. System specs: OS: Windows 7 64-bit Processor: Intel Core 2 Duo E7200 Wolfdale 2.53GHz Video Card: XFX GeForce 9800 GT 512 MB Motherboard: Foxconn P45A-S LGA 775 Intel ATX RAM: Corsair 4 GB (2x 2GB) DDR2-800 (PC2 6400) Full specs: New PC 2008 Troubleshooting tried so far (the problem occurred again after taking each of these steps, one at a time): Updated the video drivers with the latest drivers from NVidia's site. Opened up the case and cleaned out the video card and processor fans (both were pretty dirty). Installed and ran temperature monitor software. The processor idles at about 50 degrees C, and goes up to about 63 degrees C while playing a game (seems on the warm side, but not excessively so?). The software wasn't able to report the temperature of the GPU -- not sure this particular GPU supports software temperature readout? My initial diagnosis is that maybe the GPU is on its last legs (given that it seems to be running pretty hot, and the problem only occurs while playing 3D games). Does this seem likely? Or is it likely that this problem is caused by the processor, RAM, or motherboard? Or could this be a software issue of some kind? Thanks for any advice!

    Read the article

  • Windows Server 2008 Migration - Did I miss something?

    - by DevNULL
    I'm running in to a few complications in my migration process. My main role has been a Linux / Sun administrator for 15 yrs so Windows server 2008 environment is a bit new to me, but understandable. Here's our situation and reason for migrating... We have a group of developers that develop VERY low-level software in Visual C with some inline assembler. All the workstations were separate from each other which cased consistency problems with development libraries, versions, etc... Our goal was to throw them all on to a Windows domain were we can control workstation installations, hot fixes (which can cause enormous problems), software versions, etc... All Development Workstations are running Windows XP x32 (sp3) and x64 (sp2) I running in to user permission problems and I was wondering maybe I missed one, tWO or a handful of things during my deployment. Here is what I have currently done: Installed and Activated Windows Server 2008 Added Roles for DNS and Active Directory Configured DNS with WINS for netbios name usage Added developers to AD and mapped their shared folders to their profile Added roles for IIS7 and configured the developers SVN Installed MySQL Enterprise Edition for development usage Not having a firm understanding of Group Policy I haven't delved deeply in to that realm yet. Problems I'm encountering: 1. When I configure any XP workstations to logon our domain, once a user uses their new AD login, everything goes well, except they have very restrictive permissions. (Eg: If a user opens any existing file, they don't have write access, except in their documents folder.) Since these guys are working on low system level events, they need to r/w all files. All I'm looking to restrict in software installations. Am I correct to assume that I can use WSUS to maintain the domains hot fixes and updates pushed to the workstations? I need to map a centralized shared development drive upon the users login. This is open to EVERYONE. Right now I have the users folders mapped upon login through their AD profile. But how do I map a share if I've already defined one within their profile in AD? Any responses would be very grateful. Do I have to configure and define a group policy for the domain users? Can I use Volume Mirroring to mirror / sync two drives on two separate servers or should I just script a rsync or MS Synctool? The drives simply store nightly system images.

    Read the article

  • Dangers of Running Computers w/o Air Conditioning

    - by Daniel Bingham
    I recently moved in to an apartment with out air conditioning. This is fine most of the time as I am in upstate New York. It only ever gets above the high 70s during the hottest of the summer months. And when it does, I'm stubborn enough that I'll just deal with wearing minimal clothing around the house. However, I'm worried about my computers. I'm a software developer and gamer, so many of my machines are very high powered. And at least one of them is a server that must be left on 24/7 (not just a game server - also serves multiple websites). I've never before had to worry about the heat too much, as I always lived in buildings with central air. The in building temperature rarely got much above 70 F. All of the machines I built had good enough air cooling that I never saw a problem. Now the temperature in building is pushing 100F and I'm worried that the machines will not be able to keep themselves cool enough by simply blowing already hot air over themselves. The hottest of them I've turned off. However, the server I cannot. It's an old Dell (not custom build) that runs on a Pentium 4 (2.2GHz). It only has a single hard drive, integrated video. And it'd not running any processor intensive servers. Just basic LAMP. It used to run a MUD server, but that's off for now. So it should be idling most of the time. I haven't been able to find any sort of built in temperature sensors in the hardware... at least not any that the programs I've found in the Debian repository can read. And it's an inherited machine to which I do not have the full specs, so I don't know the tolerances anyway. How worried should I be about it melting down on me? How worried should I be about the hard drive melting or becoming corrupted? To generalize the question for other people, what are the safe temperature tolerances for most machines. How widely does it vary, and how does one go about determining when their machine is running too hot and needs to be shut down?

    Read the article

  • NTFS External Drive takes too long to takes data in Mac ?

    - by mgpyone
    I've an Seagate 500 GB external HD (NTFS). To read/write it on Mac (OSX 10.6.2) , I've tried MacFUSE and NTFS-3G to write my HD on Mac. Though I could be able to see the hard drive, it takes too long to see the contents like this is this normal ? also the data transfer takes too long time and the hard disk becomes too hot . Any suggestions are most welcome.

    Read the article

  • Turn off QuickTime 'start page'

    - by DisgruntledGoat
    When I start Apple QuickTime (regular non-pro version), it comes up with this page of content including "Hot Picks", "Quick Hits" and other advertising, which I assume it is getting from the internet. How do I turn this off? I just want it to open the blank player, ready for me to play a file etc and not connect to the internet.

    Read the article

  • Firefox: Where does firefox store the opened windows/tabs/urls on Crash for Restoring?

    - by jens
    Hello in which location and file does firefox save, the last windows I had opened (when firefox crashed). I have a complete "hot dump" copy of a file system and need to restore the state firefox was when the system crasehd but I cant not restore the full backupitself. I can only extract the files of firefox, but I do not know in which files i have to search for the urls that were last opened when the snapshop of the whole filesystem was done. thanks!!!

    Read the article

  • MacBook (13 in. Aluminum late 08) power adapter starting to fail

    - by Mr. Man
    I have a MacBook (Late '08 13 In. Aluminum) with the Apple provided power adapter. I think it may be failing because It takes a little moving around with the cable nearest where it connects to the MacBook to get it to charge (small light turns on). The area of cable nearest the MacBook gets very hot, almost burning. Any ideas of how I could fix it? Hopefully without replacing the adapter. Thanks in advance!

    Read the article

  • How to increase acpiphp slots?

    - by Eil
    Hi, Oh RHEL 5.5, there are 31 ACPI PCI hotplug slots by default: acpiphp: Slot [1] registered ... acpiphp: Slot [31] registered Is there a way to increase this number? I haven't been able to find an argument to supply to modprobe, or a sysctl knob to tweak, but I know there must be ways to get more slots based on some Google sleuthing. (For the curious, this is just preliminary experimentation to see how many virtual disks I can hot-add to a running KVM guest.)

    Read the article

  • How to increase acpiphp slots?

    - by Eil
    Oh RHEL 5.5, there are 31 ACPI PCI hotplug slots by default: acpiphp: Slot [1] registered ... acpiphp: Slot [31] registered Is there a way to increase this number? I haven't been able to find an argument to supply to modprobe, or a sysctl knob to tweak, but I know there must be ways to get more slots based on some Google sleuthing. (For the curious, this is just preliminary experimentation to see how many virtual disks I can hot-add to a running KVM guest.)

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >