Search Results

Search found 1150 results on 46 pages for 'partitioning'.

Page 24/46 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • What are the differences between MBR vs GPT vs any other partition scheme?

    - by Safran Ali
    Can anyone tell me what the main differences between i.e. MBR vs GPT or any other partition scheme are? Why would one choose one over the other? I am not an expert but from new release of Mac OS X which includes a feature called Time Machine, which I find highly useful. GPT is the requirement for Mac OS X Lion ... so on this basis I would say that GPT is more useful than MBR. What other partition schemes are there and which one should be used in which situation?

    Read the article

  • overriding new ubuntu installation

    - by tkoomzaaskz
    I've got a ubuntu 11.10 which has lost its support in May 2013, now I'd like to reintall up to the most up-to-date LTS, which is 12.04. My question is regarding my current partitions and doing backups. Is there a safe way to backup my data on some local partitions instead of copying files into DVDs/external drives (this is very uncormortable in my situation). Following are system commands shoing my disk: $ lsblk NAME MAJ:MIN RM SIZE RO MOUNTPOINT sda 8:0 0 232,9G 0 +-sda1 8:1 0 48,8G 0 +-sda2 8:2 0 63G 0 +-sda3 8:3 0 1K 0 +-sda4 8:4 0 53,7G 0 / +-sda5 8:5 0 18,6G 0 +-sda6 8:6 0 25,5G 0 +-sda7 8:7 0 23,3G 0 [SWAP] sr0 11:0 1 1024M 0 and $ sudo fdisk -l [sudo] password for xyz: Disk /dev/sda: 250.1 GB, 250059350016 bytes glowic: 255, sektorów/sciezke: 63, cylindrów: 30401, w sumie sektorów: 488397168 Jednostka = sektorów, czyli 1 * 512 = 512 bajtów Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512 Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512 Identyfikator dysku: 0xc3ffc3ff Device Boot Beginning End Blocks ID System /dev/sda1 * 2048 102402047 51200000 7 HPFS/NTFS/exFAT /dev/sda2 215044096 347080703 66018304 7 HPFS/NTFS/exFAT /dev/sda3 347082750 488392064 70654657+ 5 Extended /dev/sda4 102402048 215042047 56320000 83 Linux /dev/sda5 395905923 434975939 19535008+ 83 Linux /dev/sda6 434976003 488392064 26708031 83 Linux /dev/sda7 347082752 395905023 24411136 82 Linux swap / Solaris In the beginning I had Windows Vista pre-installed with the machine when it was bought (damn!) and I installed linux (the one I have now). The windows-program in master boot record has been overriden by grub and now I can boot with both Windows and Linux. This is list of mounted devices: $ mount /dev/sda4 on / type ext4 (rw,errors=remount-ro,commit=0) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/tomasz/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=tomasz) It's strange (I don't remember such thing) that my current linux uses only one partition (/dev/sda4). But, anyway, it seems like that. My final question is: am I able to use one of the existing linux partitions for a backup and install ubuntu 12.04 without removing neither windows nor ubuntu 11.04? I mean - will grub automatically accept both old windows vista and 2 linuxes (old 11.10 and "new" 12.04)? Is there any hidden operation done while installation that could harm my custom-backup-partition while installing? my fstab file: proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda4 during installation UUID=d44e89f5-9da2-48eb-83b3-887652ec95d2 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda7 during installation UUID=bbe50535-ba57-434a-9272-211d859f0e00 none swap sw 0 0 sda5 and sda6 are trash partitions created during unsuccessful linux installation (this was linux installation before my current installation), I didn't delete these partitions, but I have access to them (and I can use them as backup partitions). edit: second question is: why does lsblk show /dev/sda having 232,9G while fdisk shows that it has 250.1GB? Where does the difference come from?

    Read the article

  • Copying Windows 7 system onto Mac Pro partition?

    - by BEATFROMBRAIN
    Instead of installing a new Windows 7 system onto a mac pro partition, is it possible to copy over my complete Windows 7 system directly onto the partition, and get it to run? I just bought the mac pro, and it's running OSX 10.6... Copied from a comment: I wish to make a windows partition on the mac pro startup disk, but instead of installing windows, was wondering if I can copy over from my pc laptop byte for byte my windows system into said partition, and successfully run it

    Read the article

  • Linux Uninstalling errors

    - by Zack
    I want to uninstall back-track 5 so I deleted the partitions for back-track os. After deleting the partition that used to be for back-track becomes free space as in picture. But I can't delete that partition nor creating a new partition. I used G-Parted from hiren boot cd but it says there is no partition table, you need to create a partition table. But actually I have 5 partitions already. And I thought of restarting might fix it. But after showing post screen my laptop show grub error. I don't know what to do, and I tried to install back-track again to fix the problem but it also says that i do not have any partitions. I can only boot windows by passing through hiren boot cd. But most of the time My computer is not recognizing the external dvd drive, nor the internal so i have to restart again and again, hoping to catch the time computer recognize the dvd drive. Can I change the boot loader to correct the grub error? SOLVED : I have solved the grub error by writing MBR again by using EasyBCD But I still have the format error.

    Read the article

  • Creating a USB stick for installing centos 6.x using DVD1 and DVD2 iso files

    - by user250563
    First, we create 2 partitions on the USB stick that is let's say 16GB. first partition is let's say only 1GB and the second partition is the rest of what is available. after we "w" write the changes, the USB now has 2 partitions. 1 is 1GB 1 is more than 14GB so , we have... sdb1 and sdb2 now. now we need to turn these partitions into filesystems some say i should run these commands after those procedures. mkfs.vfat -F 32 /dev/sdb1 mkfs.ext3 /dev/sdb2 but some web pages recommend using: mkfs.vfat -n BOOT /dev/sdb1 mkfs.ext2 -m 0 -b 4096 -L DATA /dev/sdb2 which is it? so let's say the DVDs are called: CentOS-6.4-x86_64-bin-DVD1.iso CentOS-6.4-x86_64-bin-DVD2.iso so we make a directory: mkdir -p /mnt/dvd1 and then mount it: mount -o loop CentOS-6.4-x86_64-bin-DVD1.iso /mnt/dvd1 and i suppose we don't make a directory for dvd2 and we don't have to mount it ? at this point i do not know what should be done. but i think this step might be next: we make the USB bootable by finding the file named mbr.bin and then moving it to there via these commnad. dd conv=notrunc bs=440 count=1 if=/usr/lib/syslinux/mbr.bin of=/dev/sdb parted /dev/sdb set 1 boot on in other words we are "dd-ing it to 'sdb' not sdb1' or 'sdb2'. and then we use parted to set the boot to on for sdb so far everything looks good? here is the confusing parts.. how exactly do i move these iso files to the usb drive? EVERYTHING BELOW IS A GUESS. so at this point i should copy the folder /mnt/dvd1/isolinux to usb's sdb1 or sdb2 ? rename it to syslinux ? and then inside this syslinux folder there will be a file called... isolinux.cfg ? which should be renamed to syslinux.cfg ? and then copy the contents of /mnt/dvd1/images/* to USB's sdb2 ? but i think i am also suppose to copy and paste the both CentOS-6.4-x86_64-bin-DVD1.iso CentOS-6.4-x86_64-bin-DVD2.iso somewhere into this USB's sdb2 partition, correct ? almost like a drag and drop kind of a thing? or do they go into any folders ? centos' own web site has some instructions but those instructions do not work. http://wiki.centos.org/HowTos/InstallFromUSBkey i once got this working but things got ruined, i have to do it again and this time take notes.

    Read the article

  • Partition Bootable Flash Drive

    - by iAndr0idOs
    I created a bootable flash drive with Chromium OS installed on it. However, Chromium OS only needs about 4GB of space, and my flash drive is 8GB. I wanted to make the rest of the 4GB a FAT32 partition, but when I look at GParted, I have 12 different partitions on the flash drive with unallocated space scattered everywhere. I made the bootable flash drive with Ubuntu Linux's usb-imagecreator I run Ubuntu Linux 11.04 x86_64 and Windows 7 Professional x64 If any of you have experience with this, any help would be appreciated. Thanks!

    Read the article

  • How to copy partition from one disc to another (boot partition keeping all the vital data)?

    - by Patryk
    I have bought a new laptop but the HDD, which runs at 5400 rpm, is not sufficient for me. The laptop runs Windows 7 64-bit. I have my 'old' one (a better one - Seagate Momentus 7200 rpm) and I would like to replace it but without reinstalling everything. And there my question arises: can I copy my boot partition from my laptop hard drive to my old drive so that it will boot from it properly? If so, then how to do it? Will Norton Ghost be useful here? My point would be to just replace this partition and leave the rest.

    Read the article

  • Permanently mount multiple directories from different disks under /

    - by piotrek
    I have SSD and HDD. Some directories like /var, /srv and /tmp should be on HDD, while /boot, /usr and /lib on SSD. But do I have to create separate partition for every single directory? I want to have 2 or so partitions. One for each disk and distribute directories as needed. Is it possible and how? I've heard about symlinks, mount --bind, mhddfs but: symlinks are treated differently by tools like cp, so I'm not sure if it's safe to have main system directories symlinked I have no idea how can I use mount --bind or mhddfs in fstab

    Read the article

  • Cloning Windows 7 installation from MBR to GPR drive and make it bootable

    - by Nelluk
    I've seen threads on similar topics - such as this one - but the answers never seem to solve how to make it bootable. I have Win 7 64-bit on a PC installed on a 2tb MBR volume. The motherboard is UEFI compatible. I just installed a secondary internal 3TB drive which will be partitioned as GPT. Is there a relatively easy way to clone my installation over to the new drive and have that drive be bootable? I have used EaseUS Partition Master to clone the C volume to the D volume, but that would not boot and I assume the issue is that one is MBR and one is GPT. Is there a process to do this?

    Read the article

  • Restricting memory area for linux kernel

    - by user1066789
    I am running ltib linux on P1022RDK (P1022 Core) platform. I have 512 MB = 0x20000000 memory. I want my linux kernel to use second half of the board memory (i.e from 256 MB to 512 MB) and want first half of memory to be reserved for some other purpose. For this I am building linux kernel using ltib. For that purpose I am setting following kernel configuration. Please suggest if I am doing it the right way. CONFIG_LOWMEM_SIZE = 0x10000000 # 256 MB CONFIG_PHYSICAL_START = 0x10000000 # Starting from 256MB (second half of memory) On the Uboot I am loading the kernel as following way setenv loadaddr 0x11000000 # Kernel base = 0x10000000 + 0x01000000 (offset) setenv fdtaddr 0x10c00000 # Kernel base = 0x10000000 + 0x00c00000 (offset) bootm $loadaddr - $fdtaddr My kernel Load address is 0x10000000 & kernel entry point is 0x10000000 Doing above configuration / steps my kernel stuck at following on Uboot ## Booting kernel from Legacy Image at 11000000 ... Image Name: Linux-2.6.32.13 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 3352851 Bytes = 3.2 MB Load Address: 10000000 Entry Point: 10000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 10c00000 Booting using the fdt blob at 0x10c00000 Uncompressing Kernel Image ... OK ================ >> It should uncompress FDT here & continue ============== Any thoughts ?

    Read the article

  • Restricting memory area for linux kernel

    - by user1066789
    I am running ltib linux on P1022RDK (P1022 Core) platform. I have 512 MB = 0x20000000 memory. I want my linux kernel to use second half of the board memory (i.e from 256 MB to 512 MB) and want first half of memory to be reserved for some other purpose. For this I am building linux kernel using ltib. For that purpose I am setting following kernel configuration. Please suggest if I am doing it the right way. CONFIG_LOWMEM_SIZE = 0x10000000 # 256 MB CONFIG_PHYSICAL_START = 0x10000000 # Starting from 256MB (second half of memory) On the Uboot I am loading the kernel as following way setenv loadaddr 0x11000000 # Kernel base = 0x10000000 + 0x01000000 (offset) setenv fdtaddr 0x10c00000 # Kernel base = 0x10000000 + 0x00c00000 (offset) bootm $loadaddr - $fdtaddr My kernel Load address is 0x10000000 & kernel entry point is 0x10000000 Doing above configuration / steps my kernel stuck at following on Uboot ## Booting kernel from Legacy Image at 11000000 ... Image Name: Linux-2.6.32.13 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 3352851 Bytes = 3.2 MB Load Address: 10000000 Entry Point: 10000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 10c00000 Booting using the fdt blob at 0x10c00000 Uncompressing Kernel Image ... OK ================ It should uncompress FDT here & continue ============== Any thoughts ?

    Read the article

  • Not able to Defrag my drive for shrink even using PerfectDisk on Windows 7

    - by Mithun Sasidharan
    I want to partition my c drive which has over 450gb capacity of which hardly 30gb is being used. I deleted the pagefile.sys and also disabled hibernate and cache memory. I then defragmented and consolidated free space using PerfectDisk 12 and also run a boot time defragmented. Now what remains is Metadata files that preventing me from shrinking the volume beyond half the size if disk. Please tell me what to do?????

    Read the article

  • Partition error being reported by only some programs

    - by Mahmoud20070
    I am getting an error about the partitions on one of my drives. I checked my hard disk with Acronis Disk Director 11 Home, HDTunePro, MiniTool Partition Wizard, Hddscan, HDD Regenerator 2011, WD Data Lifeguard Diagnostics, GParted, and Parted Magic, but none of them found any problems with the drive. However, when I perform a check with PartitionGuru, DiskGenius, and an old version of Partition Magic (8.0), I get the following error (seen below) about the partition being bad and needing to reformat to fix it: Error - The number of sectors record in DBR overflow - Reformat Should I reforamt or not? I checked two other hard drives, one of them like my 500 WD Blue, and neither has any errors with any progras. Are there any other programs that can check partitions for errors? Finally, how should a large SATA hard disk be formatted? I currently use programs like GParted, Acronis Disk Director, or MiniTool Partition Wizard. Are these programs good for formatting a new hard disk? Could the choice of format tool be the cause of the error?

    Read the article

  • Expand disk space on Ubuntu 10.04 (VMWare Guest)

    - by Jason Clawson
    I need to resize the disk space of an ubuntu guest in VMWare Workstation. After using the expand disk utility in vmware workstation, I need to do some linux magic to resize the parition. I have searched and found a lot of posts about resizing it. Unfortunately I don't really understand it all that well. Can anyone help me out with this? df -h gives me: Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 19G 2.6G 16G 15% / none 496M 172K 495M 1% /dev none 500M 0 500M 0% /dev/shm none 500M 64K 500M 1% /var/run none 500M 0 500M 0% /var/lock none 500M 0 500M 0% /lib/init/rw none 19G 2.6G 16G 15% /var/lib/ureadahead/debugfs /dev/sda1 228M 36M 181M 17% /boot lvs says: LV VG Attr LSize Origin Snap% Move Log Copy% Convert root ubuntu -wi-ao 18.88g swap_1 ubuntu -wi-ao 884.00m fdisk -l says: Disk /dev/sda: 21.5 GB, 21474836480 bytes 255 heads, 63 sectors/track, 2610 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00033718 Device Boot Start End Blocks Id System /dev/sda1 * 1 32 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 32 2611 20719617 5 Extended /dev/sda5 32 2611 20719616 8e Linux LVM I really appreciate the help.

    Read the article

  • Backup Linux Root Partition (Fedora 12)

    - by SomeNewbie
    I setup my partition scheme to have an extra partition the size of my / partion. I have a separate home directory partition. Essentially, I will be doing things that might make my OS unstable so I'd like to backup the OS state but without bothering my home directory. Can I just backup (maybe with dd?) my root partition to another partition on the HDD? I know to restore it I would have to boot up with a livecd or something and do the reverse procedure. I want this to be as simple and require the least amount of external hardware as possible.

    Read the article

  • Disk Management Hidden Partitions - PTEDIT32

    - by Kairan
    Apparently PTEDIT32 can edit partitions, making partitions that are hidden, visible. My purpose is to take a hidden partition on a toshiba laptop (the recovery partition) and copy it as my hard drive is beginning to fail. My problem, is that I cannot find PTEDIT32 documentation on what i want to change the partition # to. I know that changing it from 27 to 7 would change it from hidden to active - but if I set it to active, I am worried it will try to launch the recovery mode (as that is what it did on a previous laptop) Here is the link I used for instructions to do this on a previous laptop: Hidden_Recovery_Link_Site So how to make the hidden partition visible without it actually RUNNING the recovery mode?

    Read the article

  • NTFS partition size not recognized after disaster recovery clone

    - by djechelon
    I'm in the middle of a disaster recovery of a 250GB hard disk that was "clicking". Obviously I didn't have a backup copy. I managed to salvage all the files thanks to GParted Live that was able to read the disk without a single "click" sound. So I cloned the partition to a new drive sized 500GB. Unfortunately, GParted process went to some kind of infinite loop, disks stopped I/O and after a couple of hours I interrupted the clone process I started. Now the problem is: when cloning the partition I also chose to expand 250GB to the whole 500GB of the target disk. Windows sees the partition sized 500GB in computer management, but Windows Explorer only sees 250. chkdsk e: /f says the filesystem is OK. How can I repair the file system and let Windows see the full 500GB of the new partition? An alternate idea is to deep-copy the files from the backup disk to a newly formatted disk. This should definitely fix. Any other ideas?

    Read the article

  • best data+partition recovery software

    - by Pennf0lio
    I accidentally formatted my Drive D that contained all my Backups and Documents. I separated my files to my Drive D hoping I will not harm my files. Since I use Acronis Recovery to Install a new OS with some pre-installed application to my HDD I didn't realize I also formated/erase my Drive D. Now my drive D is unpartitioned. I am really in really in deep trouble and would need some urgent help, Please recommend a Software that at least can restore my Old Drive that contained my files. I'm assuming most of you think this is a duplicate of some old questions here, But I'm not looking for data recovery, I need to recover the whole partition with the files. I used to use "Recuva" but It only recovers files not the whole folders with the files in it. Please advice. Thank You!

    Read the article

  • How can I control disk numbering (enumeration) in Windows 7 Disk Management?

    - by tim11g
    A desktop system had two drives (Assigned C and D, which were enumerated in Disk Management as Disk 0 and Disk 1). A new SSD was added as the boot drive, after copying the C drive to the SSD. The SSD was connected to SATA 0 (master) port on the motherboard. The previous C Drive was moved to SATA 2 and is reformatted as a non-booting NTFS partition. The D drive remained on SATA 1. The system boots and everything seems fine. I was able to manually adjust the Drive Letters. However, the list in Disk Management is re-ordered. Disk 0 is the the previous Disk 2 (D Drive) on SATA 1, Disk 1 is the new Boot Drive (now C) on SATA 0, and Disk 2 is the former C Drive (now assigned E) on SATA 2. Does the Disk 0, 1, 2, designation mean anything? I would prefer to have them display in Disk Management as Drives C, D, and E from top to bottom. Is the Disk enumeration based on the SATA port or something else? (If it was based on SATA Port, they should be ordered C, D, E. Is there any way to re-order the Disk number assignments? What actually does determine the Disk number enumeration?

    Read the article

  • How to change my W2k8 System Partition?

    - by Chris May
    On my Windows 2008 server, my C: is 1.5 TB, and the partition is marked as: Healthy (Boot, Page File, Active, Crash Dump, Primary Partition) and somehow I ended up with a 2GB D: that is marked as Healthy (System). On this D: drive are only a few MB worth of files (bootmgr, boot folder, bootsect.bak), but all Windows files are on the c:. I've done everything I can to remove the (System) mark. I tried using bcdedit, I tried marking the C:partition as "Active", I tried using bootsect.exe to assign the C: drive as the boot partition. Maybe I didn't do one of those steps correct, but I've tried everything I can. When I got my new Dell Poweredge T710, I didn't bother removing their 2 small drives before I put in my 2 new large drives. So I think when I installed W2k8 Server, maybe dell left some bootable partition on their drives to help me install the OS, but I never used it and just booted right from the install CD. Can anyone help me remove the (System) mark from the D: so I can remove the D: partition and still boot to the C:? I know I could remove the D: drives and reinstall windows, but I'm trying to avoid a total reinstall.

    Read the article

  • Adding third disk as a single disk in a server with an existing RAID1

    - by slowhandsolo
    I've got a ProLiant DL360 G5 server (Fedora 13) with two SAS disks in a hardware RAID 1, working fine. Now I hot plugged another SAS disk. I'd like to configure this new hard disk out of my RAID, as a single non-RAID disk (ex. /dev/sdb). Even after rebooting the server, I can't see the new disk with "fdisk -l". It displays only my hardware RAID, but not the new disk. [root@myserver]# fdisk -l Disco /dev/cciss/c0d0: 300.0 GB, 299966445568 bytes Disposit. Inicio Comienzo Fin Bloques Id Sistema /dev/cciss/c0d0p1 * 1 126 512000 83 Linux /dev/cciss/c0d0p2 126 71798 292422656 8e Linux LVM Disco /dev/dm-0: 234.9 GB, 234881024000 bytes Disco /dev/dm-1: 10.5 GB, 10536091648 bytes Disco /dev/dm-2: 21.0 GB, 20971520000 bytes Disco /dev/dm-3: 31.5 GB, 31474057216 bytes Disco /dev/dm-4: 1577 MB, 1577058304 bytes However, I can see the new disk using the HP Array Configuration Utility CLI for Linux "hpacucli": [root@myserver]# hpacucli => controller slot=0 physicaldrive all show status physicaldrive 1I:1:1 (port 1I:box 1:bay 1, 300 GB): OK physicaldrive 1I:1:2 (port 1I:box 1:bay 2, 300 GB): OK physicaldrive 1I:1:3 (port 1I:box 1:bay 3, 300 GB): OK => controller slot=0 pd all show detail Smart Array P400i in Slot 0 (Embedded) array A physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 **unassigned** physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: **Unassigned Drive** As you can see, I've got two SAS disks in a RAID 1 and the new disk as "unassigned". Is there any way to work with the new disk as another non-RAID single disk? If relevant, I want to create a new partition in my new disk, format it with mkfs and mount it, but as I can't see it with fdisk, I don't know how to do it. Thanks!

    Read the article

  • How do you add more space to a Fedora (LVM) partition?

    - by Trevor Boyd Smith
    In a nutshell, i have a VM that ran out of space. I increased the size of the VM's harddrive to be 4 times bigger but the OS partition is still only using 1x the space. I need to change the LVM partition to take up the extra 4x space but I don't know how to extend the LVM partition. (NOTE: To make the screenshots given below I had to boot from a live-cd for gnome-partition-manager (aka gparted). Very unfortunately gparted is only able to "detect LVM" and can't do any LVM operations.) Here is what "gparted" shows. Please notice that the "resize" option is not available: The Problem: I can't find good directions<1 on how to grow the LVM partition via GUI or command-line! How do you grow a LVM partition that was created by the default Fedora install? If you are giving command line directions. Please explain what each line of commands does.

    Read the article

  • Calculate minimum ext3 partition size for certain amount of data

    - by Daniel Beck
    These following ext3 partitions contain identical data. As we can see, the larger the partition size, the more space is required for the same files: Filesystem 1K-blocks Used Available Use% Mounted on /dev/loop11 3965777 561064 3199964 15% [...] /dev/loop19 573029 543843 29186 95% [...] Filesystem Size Used Avail Use% Mounted on /dev/loop11 3.8G 548M 3.1G 15% [...] /dev/loop19 560M 532M 29M 95% [...] Filesystem Inodes IUsed IFree IUse% Mounted on /dev/loop11 1024000 1656 1022344 1% [...] /dev/loop19 1024000 1656 1022344 1% [...] I start with a partition of fixed size that possibly wasted a lot of space and I want to create a partition that is able to hold that data but with (almost) minimal size. How can I reliably calculate that minimal partition size needed for storing a certain amount of data? The amount of data changes over time, and I need to automate these calculations.

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >