Search Results

Search found 17622 results on 705 pages for 'external drive'.

Page 240/705 | < Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >

  • New Computer freezing up at random

    - by Benjamin Frost
    Since I built my system about 4 weeks ago I'v been getting random freezes, Sometimes it can happen directly after startup and sometimes it wont freeze up for 3-4 days of 24/7 running. It seems to be happening under all stress loads but mainly when the CPU is under 10% load. It doesn't give me a BSOD or anything, it simply just freezes and repeats the last sound before the freeze until I shut it down by the power button. I'v re-seated everything in the system except the CPU, Cleaned the RAM sockets and gold fittings. None of the components have been clocked above their factory settings as of yet, don't want to overclock them until I sort out these freezes. Temps are all well under the rated max temps, the highest the temps have been are below CPU: Low load: 16-21°C Full Load (100%) 40-43°C *(From HWMonitor by CPUID) GPU 1: Low Load: 25-30°C Full Load (100%): 45-50°C GPU 2: Low Load: 23-27°C Full Load (100%): 45-50°C *(GPU Temps from Catalyst Control Center) General Case temps Rear: 18-20°C Mid: 20-21°C Front (HDD/SSD Bays): 14-19°C (Case temps may be a little off as it's from the Kaze master pro fan controller) I have Un-installed EVERY driver for Motherboard, GPU & Soundcard and Re-installed twice. Windows is all up to date. To date i'v tried the following Running Memtest for 24 hrs straight, No errors Running Memtest on each individual RAM modules, No errors Reseated everything except the CPU Cleaned DIMM Sockets and Gold inputs Tested the Graphics cards 1 at a time Re-arranged all the SATA devices to run on Chipset controlled ports Re-installing all drivers OS: Win7 Professional 64bit Motherboard: ASRock X79 Extreme9 CPU: i7 3930k 3.2GHz GPU: Sapphire 7950 OC Edition V2 (2 card Crossfire) RAM: G.Skill Ripjaws Z F3-17000CL11Q-16GBZL 16GB (4x4GB) DDR3 Boot Drive: OCZ Agility 4 128GB Data Drive 1: Western Digital Black 2TB Data Drive 2: Western Digital Black 2TB Data Drive 3: Western Digital Green 3TB Power Supply: Corsair AX1200 Gold

    Read the article

  • How do I resolve BSOD: PAGE_FAULT_IN_NONPAGED_AREA?

    - by Burnzy
    I have been trouble shooting this for a few days and cannot fix this anyhow. Computer specifications Mobo: ASUS Sabertooth X58 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard CPU: Intel(R) Core(TM) i7 CPU 920 (Bloomfield) @ 2.67 ( no OC ) RAM: 6144MB RAM GPU: 2x NVIDIA GeForce GTS 250 1Go in SLI (sli is not enabled anyway at the moment anyway) Drives: OCZ RevoDrive OCZSSDPX-1RVD0120 PCI-E x4 120GB PCI Express MLC Internal SSD [RAID-0]. (I know this could potentilly cause trouble but I had the BSOD before using this drive) Seagate Barracuda 7200.11 ST31500341AS 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive - Bare Drive Click here for a log of a crash I just had. Click here for a log of a crash I had 30 minutes later, note that it's another driver. Some info Occurence: It seems pretty random so far, haven't noticed any kind of pattern I tried: Windows memory diagnostic (went smoothly at 1066mhz) As I said, it was still happening on my HDD, so when I bought the revodrive I install a new OS on there and still got the error, I believed it happened and I had no drivers installed at that point (not 100% sure) Change the following registry value to 1 (true): HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager \MemoryManagement\ClearPageFileAtShutdown Tried to lower even more ram clock Made sure ram timing was set to recommended by manufacturer Verified if motherboard was in good physical condition (yes and its brand new) There is one thing to note, when I got the new motherboard, I installed the new drivers WITHOUT formatting and the I removed the motherboard drivers that I could remove from the control panel (pretty much the first things that have been installed). Could this cause an issue even ON THE OTHER drive (revodrive). Hopefully someone can help me, I am getting tired of this, spending so much money and cannot get this to work correctly. If you need any other information let me know, thank you!

    Read the article

  • hdparm - how to secure erase SATA SSD over USB

    - by cc0
    I have been following this guide on how to secure erase an SSD (trying to improve the performance of mine, which currently only writes at about 30mb/s seq). However, I'm using an USB--Sata docking device to avoid having the harddrive frozen. Apparently using this solution the SATA device is recognized as a SCSI drive, which is giving me trouble. I use the "hdparm -I /dev/sda" command with those parameters, and I get the error; HDIO_DRIVE_CMD (identify) failed: Invalid Exchange After a lot of googling on the issue I can't seem to find anyone who has actually solved this problem. However, I have not tried to just go ahead and use the secure erase. So I'm not sure if this would actually still work. I would love any and all input I can get on this, especially on whether it will still work to do a secure erase with the drive being recognized as a SCSI drive. The drive itself is a Samsung 256gb SSD (pm800), I'm sure you can understand my reluctance to go through this procedure without feeling reasonably safe that I won't mess it up beyond repair.

    Read the article

  • Where is my free space?

    - by Andrey
    A week ago I got a low disk space warning on my Vista x64 Ultimate box - 60 Mb free on the disk C; I cleaned up some downloaded msdn images and got 20 Gb freed up. Three days ago I got another notification, it looked suspicious but I didnt have time to deal with it and just moved some heavy stuff to another drive to free up about 17 Gb.... Today morning - 53Mb left on drive C, again! Now it looks really suspecious, so I downloaded TreeSize to see what's taking up the space, just to see it reporting only 121 GB out of 200 GB used, in other words I suppose to have about 79 Gb free. Then I went to Folder Options, enabled viewing of system and hidden files, rerun teh tool to see another 5 Gb added (which is expected). Then I open disk C in windows explorer, select all and right click Properties, to see it reporting teh same amount of files - 126 Gb. But when I look at Drive C properties, it reports that 200GB of 200 Gb are taken. I just scanned the drive with two different antiviruses - Symantec and AVG and found no viruses... I'm a little confused at this point, any ideas where is my free space, woudl be highly appreciated! Thank you! Andrey

    Read the article

  • How to check DVD region settings in Window 7

    - by jmatthias
    I have installed Windows 7 on my laptop. When I put a movie in the DVD drive, the video player starts up and tells me 'THIS DISC IS NOT FORMATTED TO PLAY IN THIS REGION'. I have changed the DVD region a few times in the past but while I was in Windows XP I changed the region in Region 1. I cannot find how to check the DVD region setting in Windows 7 (it's not located on the hard properties page of the DVD anymore. Does anybody know how to check the DVD region in Windows 7? Update: If I connect an external USB DVD drive I can see the DVD region tab on the hardware properties dialog. I guess there is some compatibility problem with my internal DVD drive and Windows 7 (as I said I was able to inspect/change the DVD region in Windows XP). Solution: I think I had used LtnRPC in the past to remove the region from my DVD drive. It looks like Windows 7 does not like region free DVD drives (at least mine anyway). I was able to use LtnRPC to reset the region back to 1. I can now see the region tab on the DVD drives hardware properties.

    Read the article

  • Sophos UTM in Hyper-V

    - by TheD
    So, I had a previous thread about this Virtualizing Firewalls/UTM. Essentially, I have configured what I think would work, but networking isn't my strong point! Two Virtual Adapters - with IP addresses 192.168.0.2 (External) and 192.168.0.3 (Internal) respectively. The External Adapater looks at 192.168.0.1 (my Zyxel) for it's default gateway. The Internal Adapter, 192.168.0.3, which is what the Sophos UTM listens on, has it's default gateway set to 192.168.0.2, the IP of the External Lan interface. So, PC (192.168.0.11, DHCP) --> (LAN) --> Switch --> 192.168.0.3 (Internal LAN Interface IP) --> Sophos UTM --> 192.168.0.2 (External LAN Interface IP) --> 192.168.0.1 --> Internet Would this be the correct setup, or am I completely out of the game here? Cheers!

    Read the article

  • Two instances of Windows Vista on boot up after failed clean install

    - by Dwayne
    I tried to install a clean version of Vista but failed. I ended up with Windows and Windows.old on my C: drive and a dual boot option on boot up. I gave up and booted up the old version and tried to rename the Windows.old to Windows and was asked if I wanted to merge the two folders. I answered yes and all seemed OK until I booted up this morning and was given the choice of two versions of Vista. The first one is the one that failed to installed correctly and the second one is the old version. How can I get rid of the failed installation? I got rid of the bad boot via MSCONFIG. Here is my current situation: several hard drives installed Using C: as my boot drive a much larger drive (H:) for storing most of my files. I found a subfolder in my C:\windows folder named windows. Upon inspection I determined it to be older than the C:\windows folder and therefore it must be the older, working version of the boot. I renamed the C:\windows folder to c:\windows.bad and moved the sub windows to the C: root directory. I also copied it to the h: drive. Now MSCONFIG reports that the copy that is booting is the h: copy. How can I change it back to the C:\ copy and can I delete the C:\windows.bad file set?

    Read the article

  • Windows won't sleep after booting from grub

    - by mkasberg
    I recently added a second hard drive to my computer and I am using it do dual-boot Linux (Ubuntu 12.04) with Windows 7. Both hard drives are SATA. I am using the default grub bootloader on my second hard drive. The windows drive is unmodified. To get to grub, I changed the hard disk boot priority in my BIOS (P35-DS3L) to boot from the second drive. The problem I'm having is that when I boot to Windows 7 (on sda) from grub (on sdb), Windows 7 will not go to sleep (from the start menu). The display shuts off momentarily as if its going to sleep, then comes back on and displays the switch-user screen. Powercfg -lastwake does not show anything. I am sure that this is related to booting from grub on sdb because when I change the hard disk boot priority in the BIOS to boot from my (unmodified) Windows hard disk, the computer goes to sleep fine. It occurred to me that installing grub on sda might solve the problem, but I'd rather not since I like to have my windows hard disk unmodified so that booting to it from the BIOS boots directly to windows. A possible work around is to use the BIOS as a bootloader, by pressing F8 to select the boot device. Still, I'd like to know why the problem is happening in the first place.

    Read the article

  • Give back full control to a user on a disk from another computer

    - by Foghorn
    I have my friend's hard drive mounted externally. After messing with the permissions with TAKEOWN so I could fix some viruses, I have full control over their drive. The problem is, now it's stuck in a "autochk not found" reboot sequence. I think the problem is that the boot sector is invisible to the drive now. So my question is, How can I use icacls to give back the full ownership, when the user I am giving it to is not on my machine? I ran the TAKEOWN command from my windows 7 laptop, their machine is a windows xp Professional with three partitions, I only altered the one that has the boot sector. Here is the permissions that icacls shows: (Where my computer is %System% my username is ME, and the drive is E:\ C:\Users\ME icacls E:\* E:\$RECYCLE.BIN %System%\ME:(OI)(CI)(F) Mandatory Label\Low Mandatory Level:(OI)(CI)(IO)(NW) E:\ALLDATAW %System%\ME:(I)(OI)(CI)(F) E:\alrt_200.data %System%\ME:(OI)(CI)(F) E:\AUTOEXEC.BAT %System%\ME:(OI)(CI)(F) E:\AZ Commercial %System%\ME:(I)(OI)(CI)(F) E:\boot.ini %System%\ME:(OI)(CI)(F) E:\Config.Msi %System%\ME:(I)(OI)(CI)(F) E:\CONFIG.SYS %System%\ME:(OI)(CI)(F) E:\Documents and Settings %System%\ME:(I)(OI)(CI)(F) E:\IO.SYS %System%\ME:(OI)(CI)(F) E:\Mitchell1 %System%\ME:(I)(OI)(CI)(F) E:\MSDOS.SYS %System%\ME:(OI)(CI)(F) E:\MSOCache %System%\ME:(I)(OI)(CI)(F) E:\NTDClient.log %System%\ME:(OI)(CI)(F) E:\NTDETECT.COM %System%\ME:(OI)(CI)(F) E:\ntldr %System%\ME:(OI)(CI)(F) E:\pagefile.sys %System%\ME:(OI)(CI)(F) E:\Program Files %System%\ME:(I)(OI)(CI)(F) E:\RECYCLER %System%\ME:(I)(OI)(CI)(F) E:\RHDSetup.log %System%\ME:(OI)(CI)(F) E:\System Volume Information %System%\ME:(I)(OI)(CI)(F) E:\WINDOWS %System%\ME:(I)(OI)(CI)(F) Successfully processed 22 files; Failed processing 0 files C:\Users\ME

    Read the article

  • Will having 2 MX records pointing to different mail server types cause delivery issues?

    - by Lyken
    I've inherited a setup where the mail server is exchange 2010. For some reason, I'm not sure why there is 2 MX records setup. One being the exchange server which is the higher priority while the external (non-exchange) server is the secondary mx record. I don't believe this was done for redundancy reasons as the other mail server is not set to route mail back to the exchange server (it's just the webhosts email for their hosting) The client has been experiencing disappearing email, however after my investigations its not actually disappearing, but exchange is successfully receiving the mail and then passing it on to the external server. It isn't happening all the time, just with some email messages from some domains. My question: Is exchange passing the mail on because it can see the secondary MX record and is configured (somewhere) to send mail out? If so, how do I stop it? Is it as easy as just removing the second MX record pointing to the external mail server and exchange will stop passing mail on? I'm not exchange expert so I'm kinda stumped. Exchange MX tools are saying everything is setup and configured correctly from an external point of view.

    Read the article

  • DIR $file "File Not Found" vs DIR $filedir shows it....not permissions, not USB

    - by Kev
    I was having this problem before on a USB drive, but now it's happening on my main RAID5-backed hard disk: 2013-10-17 9:37 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel*" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs 2003-09-09 11:29 PM 1,056,768 Manuel d'intervention d'urgence MFC.doc 2004-06-20 10:36 PM 139,849 Manuel d'intervention d'urgence MFC.pdf 2 File(s) 1,196,617 bytes 0 Dir(s) 196,068,691,968 bytes free 2013-10-17 9:38 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel d'intervention d'urgence MFC.doc" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs File Not Found 2013-10-17 9:38 C:\> This is from a Command Prompt window where I went to Properties and told it I wanted to modify who it ran as. I opened it, had it run as me with the "restricted access" unchecked, then ran the above. The file in question has the following ACLs: Administrators, SYSTEM, and OurCompanyUsers. All three have full control of everything. Nobody has any Deny bits set. I am a member of Administrators. So I don't believe it's a permissions issue. It's not a USB drive, so this time there is no question of USB hardware. Windows Server 2003 Standard Edition SP2. What does this mean? Is this more likely a hardware or software problem?

    Read the article

  • Permissions on mac for itunes library with multiple users - idea

    - by John
    I currently have a lot of music on an external drive and my itunes set up from there. However, periodically, when the external drive isn't connected, itunes will default back to the library location of my home directory user path. I don't want to mess with an external drive, as my mac HD is large enough to house the music collection. However, I have 4 family members - all with their own logins - using this same gob of music. I don't want 4 copies of the library, only one with all libraries referencing it. So, what I want to do is: 1 - move all music files to a shared directory at /Macintosh HD/users/music. I created this directory and adjusted permissions, so all four users can read and write to this directory. 2 - get all four accounts to reference this library instead of the external or local home locations I am hoping I can just check the box to keep library organized in my account, which is the admin and let itunes move it all. Then delete current libraries for each account and re-add from the new shared location. Will the itunes organization process cause permissions issues either by setting permissions to all the files access to my account only or write permissions or any other 'gotcha'? I am having a hard time coming up with a smooth solution that won't break everything and cause me to have mega duplicates or access issues. I would prefer not to do any xml library file editing if possible. Am I dreaming? Thanks for help.

    Read the article

  • Protocol to mount fat32 network filesystem on Linux with ability to lock files ( not advisory locks

    - by nagul
    I have a fat32 filesystem sitting on a NAS storage device (nslu2) that I need to mount on my Ubuntu system. I've tried Samba and NFS mounts, but both don't seem to support proper locking. More specifically, I am unable to save files to the mounted drive through GNUcash, KeepassX etc, which makes the share fairly useless. Is there a protocol that allows me to achieve this ? Note that the NAS storage device is running a linux OS so I can run pretty much any protocol that has a linux implementation. The only option I'm not looking for is to reformat the partition to ext3, which I'm not able to do due to other constraints. Alternatively, has anyone managed proper locking of a fat32 system over the network using Samba ? Or, is advisory locking the best you get with a network-mounted fat32 file system ? I've thought of trying sshfs but I've not found any indication that this will solve my problem. Edit: Okay, maybe I can reformat the drive, but to any file system except ext3. The "unslung" nslu2 doesn't like more than one ext3 drive, and I already have one attached. So any solution that involves reformatting the drive to ntfs, hfs etc is fine, as long as I can mount it on linux and lock files.

    Read the article

  • Robocopy launches and then hangs/just sits there

    - by NateO
    I'm setting up an archive process to store old files on an external hard drive. The computer in question is running Windows 7 Pro 32bit. We have a server folder with 150,000+ files in it, most of which are pretty small (below 200k). I'm trying to use robocopy in a batch file to do this. It was working fine the other day, now all it does upon launch is sit there. It shows me all the options and whatnot, and also lists the number of files in the directory and the directory itself, but it never gets past that line. If I switch the destination to the local C drive, it eventually starts copying files. Is there something in my batch file that needs to change? Or could there be a problem with the external Western Digital drive that I'm using? The WD drive currently is holding about 175,000 files. Here is the one line batch file I have: robocopy "\\cgifp01\Prepress\Public\ImportedPDF" "E:\OldFiles" *.* /R:2 /W:10 /MINAGE:15 /MOV /B /XJ /XF "blank_test.pdf" Thanks for any tips or ideas. Nate

    Read the article

  • How to configure SCSI hard drives and RAID for Poweredge 2850 web server

    - by Saul
    I'm trying to set up a Poweredge 2850 as a web server, but as a server novice it's causing me some confusion. Its a virgin install so no data to be lost as yet, so I'd like to get the best arrangement for setting up Windows Server 2008. The box will run IIS, a mail and FTP server. The current physical arrangement of the hot swap drives is 1 73GB 3 146GB 5 blank 0 73GB 2 146GB 4 146GB (but flashes green, amber off) When I enter the PERC config screens on boot up I've got Raid Ch- 0 ID 0 ONLIN A00-00 1 ONLIN A00-01 2 ONLIN A01-00 3 ONLIN A01-01 4 HOTSP I think that drives 0 and 1 are set to RAID 1 and drives 2 and 3 are also set to RAID 1, certainly I can see 2 logical drives, both raid 1 of 69880MB and 139900MB Now what I think I am getting here is that the 2 73GB drives mirror each other and the 2 146GB drives mirror 2? so by my noob thinking if a drive fails I can pull it, insert and new one and it will reduplicate from its matching pair? I think the flashing amber probably indicates a failing drive in slot 4, should that just be binned? What confuses me coming from a home user XP background is that when I load up Windows Server 2008 OS under my computer I only see a C drive of about 70GB capacity. i.e wheres the 146GB drive? Any advice appreciated

    Read the article

  • Files on ext4 on Drobo with corrupt, zero-ed out blocks

    - by Patrick
    I have a 2TB ext4 file system (Ubuntu running Linux kernel 2.6.31-22-server x86_64). This file system is the second drive on a Drobo box plugged in via USB. We've not had problems on the first drive (Drobo limits drive size to 2TB due to some OS limitations, so if you have more space than that it appears as two separate drives). I am sharing this files with Samba (smbd 3.4.0) with a mix of Windows and Linux workstations. Recently we've been experiencing some data corruption in multiple files. In many cases I have an un-corrupt original file stored on one of the workstations. These are binary files of various formats, (e.g. SQLite, but others as well). I used "split" to split a corrupt and uncorrupt file into 4096 byte chunks (this is the block size of the ext4 file system). I then ran md5sum on pairs of chunks and discovered that the chunks matched in many cases and in every case where they did not match, the corrupt chunk was a solid chunk of zeroes (620f0b67a91f7f74151bc5be745b7110 for what it's worth). I'm trying to track down a culprit but am a bit at a loss. I don't believe Samba is at fault since I'm using it without issue on the first drive exported by the Drobo. What can I do to narrow this down and find out what's going on?

    Read the article

  • Is it possible to have a wireless in-house NAS with wireless data transfer rates of equivalent to SATA speeds?

    - by techaddict
    Basically I would like to know, if it is possible to set up an NAS in my house to be accessed wirelessly, that can reach equivalent real-life data transfer speeds to USB 3.0 or an internal SATA hard drive. I have been wanting to do this for some time ( a couple of years now). Basically, this is what I want to do: Plug in a number of hard drives in an array, somewhere in my house, to be left plugged in and never have to be monitored. Ideally several terabytes. Whenever I am home, to have my computer and laptop configured to automatically find the NAS, as easy as plugging in an external hard drive - except completely wirelessly. Data transfer needs to be as seamless and quick as having added another internal hard drive in my laptop. Moreover, data should be able to accessed without having to copy it over - I should be able to wirelessly access the NAS and browse files, and open files directly from the NAS. For example, say I wanted to open a video - I should be able to play the video that is located on the NAS, directly from the NAS, completely wirelessly. If I wanted to open a .pdf file, I should be able to open it and read it directly from the NAS, as if it were located on my physical internal hard drive. Cost is important as well. Please tell me what equipment I need for this to be possible. I know you geniuses out there who can tell me if this is possible.

    Read the article

  • Why do I get a DegradedArray event with mdadm

    - by azera
    Hello Just so we're clear on what's happening: I bought 4 new sata 2 drives, with the intent of using them in a raid5 all drive are fully recognised by both my bios and my linux box (gentoo) I created a raid5 array, fiddled a bit with it to understand how it works, how to monitor ect At some point, this triggered a degradedarray event, even though the array is brand new. I tried to stopping the array and recreating a new array with the same drive but the new array starts degraded too. here is what I used to create it mdadm --create -l5 -n4 /dev/md/md0-r5 /dev/sdb /dev/sdd /dev/sde /dev/sdf here are the output from my /proc/mdstat and mdadm --detail --scan **mdstat** Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md127 : active raid5 sdf[4] sde[2] sdd[1] sdb[0] 4395415488 blocks level 5, 64k chunk, algorithm 2 [4/3] [UUU_] [>....................] recovery = 2.8% (41689732/1465138496) finish=890.3min speed=26645K/sec unused devices: <none> **detail** ARRAY /dev/md/md0-r5 metadata=0.90 spares=1 UUID=453e2833:81f22a74:64188b84:66721085 As such I have a couple questions: does a raid5 array always start in degraded mode at first ? why does sdf have the number 4 between bracket instead of 3, why does it see a spare disk and why is the 4th drive marked with _ instead of U ? (bad configuration ?) How can I recreate the array from scratch, do i have to format each drive on its own before recreating it ? Thanks for any help, I'm not sure about what I should do at the moment

    Read the article

  • Do registry issues with Win7 persist through a recovery from a system image?

    - by user59089
    So I need a bit of advice, please; here's my situation: I have 1) a system image on an a brand new external 1 TB SATA drive, that I managed to successfully capture before my 2) primary system drive went down. I realize this is a fairly simple matter of buying a new primary drive and performing the recovery to the fresh disk...however, the issue is that I believe Win7 was also having some significant issues of its own--basically, Update unable to install updates, and Backup continually ditching the auto backup schedule. I'd been trying to address those issues when my system was still working, but it's been so fruitless, I'm convinced a Win7 re-install would be best, and now I'm concerned that if I was in fact having what I believe are likely registry-related issues before, that these will persist through a recovery--would that likely be correct? I'm mainly worried about recovering my files, so if I did a full recovery from the image, should I be able to then access my individual files, and copy them manually to an external drive, so I can then do a full re-install of Win7? Sory if this seems obvious, but I've never done a recovery before and just trying to make sure there's no red flags with what I have in mind...

    Read the article

  • Had almost 300 GB worth of files with random names on my computer, and now they are gone. Any idea what they were and where they went?

    - by John
    A couple of days ago I noticed I had a folder on my computer with more than 15 files in it. All the files were the exact same size (215 MB). They all had different names (just a bunch of random characters like Abe327(/-38s etc. I wasn't sure what they were so I decided to try to delete them. But then I noticed they disappeared from the D drive. Then the next day I noticed a new folder, with similar names and file sizes showed up on my C drive. The timestamps on the first set of files was almost all from a few months ago. Like the timestamps were saying 3:52 AM, 403 AM, etc. all from the same date. Then the set of files on the C drive that just appeared had yesterday's date on them. But similarly, all the files had timestamps within a 24 hour period. Like they had all just been created. Now this morning, all of those files are gone, and I didn't delete them. There are now no files like this in either drive. Any idea what these files were? Why were they so large, and why are they switching drives? Why did they disappear completely now, after the initial files were there for a few months.

    Read the article

  • Mac Grey/White Screen of Death

    - by cust0s
    The other night I updated my iTunes to the latest version (through Software Update) when I came to turn on my computer I was greeted with the dreaded white screen of death. I use an early 2008 iMac 24". I've tried the basic things, unplugging/turning off accessories, trying to boot from the install disk, reseting pram, etc, etc. Still no luck and no change what-so-ever. All I've been able to ascertain that my keyboard still works (by ejecting). I should point out that I did recently replace my Hard drive with a Western Digital Black 500GB (though the computer is well out of warrenty) and I'm a little concerned that the problem could be the screen. Update (18/05/10): I've been told that I could be getting the White/Grey screen of death because the optical flex cable is damaged (aparently this is common). Apparently the Optical Drive is part of the POST sequence, and an inability to read the drive can result in failure for the system to move on to other bootable volumes. More info here. I will disable the optical drive and see if that works.

    Read the article

  • Configuration Help for Sendmail Required

    - by Vinayak Mahadevan
    Hi I need some help with respect to sendmail configuration. The basic problem is that I have some employees working from other places and they need access to their mail. So what I have done right now is whatever mails which are meant for them which are generated from within the company and collected by my internal mail server is bounced to an external mail server from where the employees access it. This is done through a email id on a different domain. This was working fine till I restricted the external mailing access for certain users using rulesets in sendmail.cf. Once I had put that in place only people who had external mailing rights could send mails to people outside the office. What I would like to know is that is there anyway where I can expose sendmail on two different ips and thereby configure everybody's email id to point to the same internal mail server using 2 different ips. one ip when inside the company and one ip outside the company. Is it possible that I have one static ip configured for both internal access and external access or is there any otherway it can be done with sendmail. Can anybody help me Sorry for the long post Regards Vinayak

    Read the article

  • Unix Permissions: Enable access to files no matter the user?

    - by TK Kocheran
    I've been using Linux for a long time and I still am completely in the dark about how file permissions really work. With that in mind, does anyone have any books or thorough guides I could read to really understand things completely? I've done my fair share of sysadminning, so I know the easy stuff like making directories readable and writable, making files executable, and changing the owner of a file, but on sharing files across users, I'm lost. Here's my main problem. I have a number of machines across which I intend to synchronize my music library. I've been using Unison for a while now and it's a great choice as I can easily run it over SSH on my local network which I just set up. Win-win. Up until this point, I've been synchronizing computers using a 2TB external hard drive. (computer 1 unisons to HD, computer 2 unisons to HD, etc.) This is tedious at best, especially since I encrypted the drive, making it a huge hassle to hook it up to all of my machines and sync it. Anyway, the drive is running ext4 (in TrueCrypt), so it maintains all Unix filesystem info like owners and groups. I just set up a new machine and just Unison'd it to get the music on it, and I realized that now, all of my permissions are fubar. I had to run Unison as root since that was the only way I could get the files to come off of the external drive. Apparently, since I'm using a different user name on this machine than my usual "rfkrocktk" across all machines, this essentially throws a huge wrench in the gears. Here's my use case. This laptop has two effective users, "leandra" and "rfkrocktk". I want to share music between these two users, so I symlinked /home/rfkrocktk/Music to point to /home/leandra/Music. How do I (a) allow both users access to read/write/delete files in this folder, and (b) keep everything nicely in sync without messing up file ownership?

    Read the article

  • permanent NAS-mount in Ubuntu - wrong fs type, bad option, bad superblock

    - by Emil
    My network drive shows up in the file browser, just like my external usb-harddrive. Moving, running and editing files works. Hovering over it shows smb://lacie-2big/nasdisk . BUT, when I want to save a file, the drive doesn't come up as an option. All I can see is my other places, including my usb-harddrive. I am a complete newbie but I am GUESSING that it has something to do with the mount not being a "real" mount but just a shortcut to the smb location. So I ran the tutorial at https://wiki.ubuntu.com/MountWindowsSharesPermanently about how to "mount a network drive permanently". edited my fstab to //LaCie-2big/nasdisk /media/nasmount cifs guest,uid=1000,iocharset=utf8,codepage=unicode,unicode 0 0 and running sudo mount -a gave me the following error: mount: wrong fs type, bad option, bad superblock on //LaCie-2big/nasdisk, missing codepage or helper program, or other error (for several filesystems (e.g. nfs, cifs) you might need a /sbin/mount. helper program) In some cases useful info is found in syslog - try dmesg | tail or so Now thats a very helpful error message, BUT, before I go any further, I'd be really thankful if one of you could tell me if I'm even in the right ballpark, or if my actual need: to be able to download files (ie torrents) directly to the drive, can be possible as it is already. Question: How to fix "wrong fs type, bad option, bad superblock on //LaCie-2big/nasdisk, missing codepage or helper program" when running mount -a

    Read the article

  • Changes to grub in ubuntu 10

    - by jdege
    I've been running CentOS 5 for some years. I've decided to upgrade to Ubuntu, and with 10.04 just out, this seemed like a good time. I'm a tad paranoid, so I started off with a new set of drives - one to install on, one to backup to, and one as a spare. I removed my existing CentOS 5 drives, and did an install, and had no problems. I installed the server version, and used the default full-disk LVM installation. Next, I copies my backup scripts over, edited them to work with the new configuration, and did a test backup. That worked fine, as well. Then comes the real test, could I do an install of the backup onto the spare drive? (I won't put anything of importance on a system that doesn't have a reliable backup, and if I've never done a restore, it's not reliable.) I booted from a System Rescue CD (ver 1.5.3), with the spare drive as /dev/sda, and the backup drive as /dev/sdb. I had no trouble in partitioning, configuring LVM, formatting, making swap, or restoring the file systems. But when I got to restoring grub to the MBR, I ran into problems. My restore instructions from CentOS 5 said run grub, then enter two commands: root (hd0,0) setup (hd0) The first command exits with an error: "Checking if /boot/grub/stage1 exists ... no" I did some googling around, and found that the Grub2 included in recent Ubuntus is very different than the Grub 0.97 included in CentOS 5. One site suggested I use: grub-install --root-dir=/mnt/restore /dev/sda That appeared to work, but when I booted from the drive, I ended up at a grub prompt. Any ideas as to what I need to do? It seems like a simple problem, but my attempts at searching out answers on the web are being swamped by references to the old version of Grub. Help would be appreciated.

    Read the article

< Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >