Search Results

Search found 6636 results on 266 pages for 'jdbc driver'.

Page 242/266 | < Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >

  • What does the 'Burst Rate' stat mean in HDTune?

    - by UpTheCreek
    I recently upgraded my laptop's v slow hard drive to a seagate momentus 7200. Everything is working fine, but I'm a bit confused by these benchmark results: The burst rate is significantly less than the Maximim transfer rate, and not much higher than the normal minimum (if you ignore the spikes). What's going on here? On the HDtune website it defines Burst Rate as: ...the highest speed (in megabytes per second) at which data can be transferred from the drive interface (IDE or SCSI for example) to the operating system. Which begs some questions... e.g. if this is the highest, then how did the bechmarking tool record the 103MB/sec maximum? And if this really is the true maximum, then where is the bottleneck? The laptops SATA interface is on an Intel 82801GBM southbridge controller. When I check in hardware manager, I see that it's driver is iaStor.sys from 2005. Maybe that's the issue? I'll look for a newever version, but any insights would be appreciated. Thanks

    Read the article

  • Linux on MacBook Air

    - by enduser
    I'm thinking of getting a MacBook Air. The answers to this post will help me make my decision. My questions and my understanding of current solutions are: How difficult is it to install a Linux-based OS (like Fedora or Ubuntu)? I've heard a little about rEFIt, but am not sure what to make of it. Is it completely necessary? Do I still need it if I don't plan to dual boot with Mac OS X? Also a dual-boot isn't necessary, I'd just like to run Fedora/Ubuntu by itself, but I'm curious to know if a dual boot is simple. Does everything 'just work'? In my current laptop I need to add a wireless driver (Broadcom card). I've heard Macs use Broadcom wireless cards. Will this be an issue? How about graphics/touchpad (& multitouch)/sound? I'm aware there are tutorials out there on how to install some older version of some os on your Mac, but my questions are a bit more general: Will it be easy to use (install and configure drivers for) recent Linux distributions with a new MacBook Air? Note: I don't mind extra configuration, but would like to know where it'll be necessary, because if it's too much of a hassle I'll look at other hardware.

    Read the article

  • Windows 7 automatically logs out when logging in

    - by Luke
    A Windows 7 HP x64 computer is set to automatically log in (no password), but once it starts logging in, it starts to load the desktop after the welcome screen, but before icons or background images are loaded, it goes to the Welcome screen saying 'Logging Off'. I can log in with Safe Mode, and I ran a couple different virus scans, with no detections. I also tried checking the userinit.exe file in System32 (as suggested by MANY users for Windows XP), but it's the same version as a working system. I also checked the registry under HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogon for the SHELL and UserInit values, but they look normal. I tried to disable all startup items (through MSCONFIG) to select Diagnostic boot, but then I get a blue screen about the video driver not loading. Any other ideas? EDIT I created a new user, and it could log in no problems. I am thinking it's the NTUSER.DAT file. I just renamed it to NTUSER.DAT.old, then tried logging in as the problem user. I could log in, but as a TEMP profile. His profile folder is now C:\Users\TEMP, and his old folder is still accessible but in the wrong location. EDIT 2 I can't seem to turn off the TEMP profile, so I'm open to other suggestions. Copying the folders (i.e. Documents, Music, etc) does not work, as it creates an additional TEMP.000 then TEMP.001 folder each time the user logs in.

    Read the article

  • Sound doesn't work anymore after replacing RAM

    - by thejh
    Hello, today, I replaced one old RAM module with two newer, bigger ones, but now, the sound doesn't seem to work anymore. Already ran alsaconf and it didn't help. Output of lspci for the audio device: 00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1) Subsystem: Giga-byte Technology Device a002 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at f5100000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel The audio device is onboard and has six configurable outputs, two or so are also capable of being an input (if I remember it correctly), but I don't know how to control it under linux. Does somebody know how/whether replacing the RAM could be related to my problem and/or how to fix it?

    Read the article

  • If I run two monitors from two different graphic cards, can I still have Twinview?

    - by rumtscho
    I am planning to get a second 2560x1440 monitor for home. The trouble is, I only have 1xDVI, 1xVGA on my graphics card (a 250 GT). I don't want to buy a new graphics card until the prices for the 500 series have stabilized, so probably not before summer (or will it happen earlier? I don't remember how it was for other series, and I couldn't find long-term price history for video cards). The solution I had in mind is to get the 7600 GS from my old PC, which also has 1xDVI, 1xVGA, and run each monitor on a separate card. I have never done that, and I was wondering 1. If I will be able to run the monitors in Twinview then, or will I be stuck with separate X sessions, and 2. Whether there are some other disadvantages as compared to a single-head graphics card. (I am using the proprietary driver because I need compiz). As an aside, how do I find out whether the DVI port on the old graphics card is dual link?

    Read the article

  • Windows XP - Power surge on hub port

    - by Swift-Tuttle
    Hi, Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

    Read the article

  • Configuring WPA WiFi in Ubuntu 10.10

    - by sma
    Hello, I am trying to configure my wireless network on my laptop running Ubuntu 10.10 and am having a bit of difficulty. I am a complete Linux newb, but want to learn it, hence the reason I'm trying to set this up. Here's the vitals: It is a Gateway 600 YG2 laptop. It was previously running Windows XP, but I installed Ubuntu 10.10 in place of it (not a dual boot, I removed XP altogether). I have an old wireless card that I'm trying to resurrect. I haven't really used the card in a couple years, but it seems to still work, I just can't connect to my home's wireless network. The card is a Linksys WPC11 v2.5. When I plug it in, Ubuntu recognizes the network, but won't connect to it. My home network uses WPA encryption and the only connection type that Ubuntu's network manager is giving me is WEP and then it asks for a key -- I have no idea what that key should be. So, basically, I'm asking, is there a way I can instead connect through WPA? I've tried creating a new connection in network manager, but that won't work, it keeps falling back to the WEP connection and asking me for a key. I have tried to install the XP driver using ndiswrapper but I don't know if that's working or not. Is there a way to tell if: A) the card is working as it should B) the correct drivers are installed (again, I installed the XP one using ndiswrapper NET8180.INF, but I'm not sure what to do next) Any help would be appreciated. Thank you.

    Read the article

  • disable specific PCI device at boot

    - by Rhymoid
    I've just reinstalled Debian on my Sony VAIO laptop, and my dmesg and virtual consoles all get spammed with the same messages over and over again. [ 59.662381] hub 1-1:1.0: unable to enumerate USB device on port 2 [ 59.901732] usb 1-1.2: new high-speed USB device number 91 using ehci_hcd [ 59.917940] hub 1-1:1.0: unable to enumerate USB device on port 2 [ 60.157256] usb 1-1.2: new high-speed USB device number 92 using ehci_hcd I believe these messages are coming from an internally connected USB device, most likely the webcam (since that's the only thing that doesn't work). The only way I can seem to have it shut up (without killing my actually useful USB ports) is to disable one of the USB host controllers: # echo "0000:00:1a.0" > /sys/bus/pci/drivers/ehci_hcd/unbind This also takes down my Bluetooth interface, but I'm fine with that. I would like this setting to persist, so that I can painlessly use my virtual console again in case I need it. I want my operating system (Debian amd64) to never wake it up, but I don't know how to do this. I've tried to blacklist the module alias for the PCI device, but it seems to be ignored: $ cat /sys/bus/pci/devices/0000\:00\:1a.0/modalias pci:v00008086d00003B3Csv0000104Dsd00009071bc0Csc03i20 $ cat /etc/modprobe.d/blacklist blacklist pci:v00008086d00003B3Csv0000104Dsd00009071bc0Csc03i20 How do I ensure that this specific PCI device is never automatically activated, without disabling its driver altogether? -edit- The module was renamed recently, now the following works from userland: echo "0000:00:1a.0" > /sys/bus/pci/drivers/ehci-pci/unbind Still, I'm looking for a way to stop the kernel from binding that device in the first place.

    Read the article

  • Constant crashes in windows 7 64bit when playing games

    - by yx.
    I've tried everything I can possibly think of in trying to fix this problem and I'm totally out of ideas, so any help would be appreciated: The problem: whenever I fire up a game, it works for a short while with no problems and then it would crash. Either its a hard crash, forcing me to reboot, or windows would report that the display driver has stopped working and recovered. Here is a list of things I've already tried: Drivers - tried the latest drivers (catalyst 9.12) as well as the stock drivers that came with the video card. Also have the latest BIOS/chipset Memtest - Ran Memtest86+ overnight, had no problems, the windows diagnostic tool also does not find any problems. Overheating - Video card/cpu temperatures are well below peak (42 and 31 Celsius receptively) PSU Voltage - CPUID shows that the voltage levels are all above what they should be. The PSU itself is only roughly 16 months old and is a good model. HDD - No errors when checked GPU - Brand new (replaced previous card since I thought it was the problem, apparently not) Overclocking - Everything is at stock levels, memory voltage is set to manufacturer's standard Specs: Motherboard: ASUS P5Q Pro CPU: Core 2 Duo E8400 3.0 ghz OS: Windows 7 home premium 64 bit Memory: Mushkin Enhanced 4GB DDR2 GPU: Sapphire HD 5850 1GB PSU: SeaSonic M12 600W ATX12V DirectX: DX11 Event Viewer after a crash always has these logged: A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 1 The details view of this entry contains further information. A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 0 The details view of this entry contains further information. A previous card that I had (4850x2) also had these errors, so I changed video cards, but the same thing is happening.

    Read the article

  • Unable to install drivers of any kind of device on windows 8.1

    - by saadj55
    Windows 8.1 is unable to install drivers. First, I wanted to install Android ADB drivers for my Chinese Android Phone. I downloaded the relevant drivers from the manufacturers site and enabled USB debugging on my phone and tried to install it but Windows failed to find any drivers in the driver folder. After searching on google, I got to know that I will have to edit the win_usb.inf file in order to install the drivers so I did the editing part also. Added these line: %SingleAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C03 %CompositeAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C03 to both NTamd and NTx86 sections but the problem persists. Phone's current hardware id is: VID_0BB4&PID_0C03 I noticed that I need hardware ID with &MI_01 appended at the end. But Windows detects the device with the above hardware ID. I have the webcam drivers so I uninstalled WebCam Drivers to check if they can be installed back but I am also not able to install drivers for it. Windows is detecting the camera without that &MI_01 part. Please help. I cannot install webcam nor my android phone.

    Read the article

  • 3 Monitor PCI-e Graphics card (without tremendous pain)?

    - by N Rahl
    As we are all painfully aware, the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time. The exact message is: The current settings cannot be applied. Possible issues may include: - Display(s) cannot be enabled. - Setting(s) cannot be applied due to insufficient video memory. So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question: First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment.

    Read the article

  • Removing Phantom Registry Entries

    - by shedd
    First, some background: I'm trying to install an HP OfficeJet 6500. I've got the printer setup on my network fine, but the driver software installation on Windows XP (SP3) is a PITA. The installation program keeps dying with the following error: Product: Network -- Error 1324. The folder path 'WD Sync Data' contains an invalid character. WD Sync Data is a program on external Western Digital harddrives, which I used to use on this computer, but no external drive is current mounted. I've searched my registry for those keywords, but haven't found anything. I also ran CCleaner on the registry just to make sure, but no loose ends detected there, either. There are a number of Google results for the error, but no solutions. One post pointed me to the Windows Installer Cleanup Utility, but this utility doesn't even run - it dies with the same error before even starting. Any thoughts on where I could look to clean up this invalid character so I can get the HP installation wizard to successfully run? Many thanks in advance!

    Read the article

  • Low 'Burst Rate' from SATA drive in HDTune?

    - by UpTheCreek
    I recently upgraded my laptop's v slow hard drive to a seagate momentus 7200. Everything is working fine, but I'm a bit confused by these benchmark results: The burst rate is significantly less than the Maximim transfer rate, and not much higher than the normal minimum (if you ignore the spikes). What's going on here? On the HDtune website it defines Burst Rate as: ...the highest speed (in megabytes per second) at which data can be transferred from the drive interface (IDE or SCSI for example) to the operating system. Which begs some questions... e.g. if this is the highest, then how did the bechmarking tool record the 103MB/sec maximum? And if this really is the true maximum, then where is the bottleneck? The laptops SATA interface is on an Intel 82801GBM southbridge controller. When I check in hardware manager, I see that it's driver is iaStor.sys from 2005. Maybe that's the issue? I'll look for a newever version, but any insights would be appreciated. Thanks UPDATE: Acorting to this page on the HDTune website... An important parameter of the test is the Burst Rate. This value should always be higher than the maximum transfer rate. A lower value is usually an indication of a configuration problem. So what might be the configuration problem?

    Read the article

  • Trying to diagnose network problem: ping 127.0.0.1 (or any address) results in error code 1

    - by Mnebuerquo
    NIC seems to be working, as windows detects the hardware and has a driver and reports success. DHCP seems to have gotten an ip address, 192.168.1.101. I released and renewed it and it seemed to work normally. I tried ping 127.0.0.1 as first step of testing network configuration. Pinging 127.0.0.1 with 32 bytes of data: PING: transmit failed, error code 1. I read somewhere that net helpmsg [error code] would give a human readable name for the error code. net helpmsg 1 says "Incorrect function" I've tried disabling the firewall and antivirus in McAfee SecurityCenter and I still get the same error. Could the firewall/antivirus be breaking it even if disabled? Broadcom Advanced Control Suite 2 is installed, and its network test passes all tests, including ping 192.168.1.1 which is the default gateway. If I try ping 192.168.1.1 from the command prompt I get the error code 1 again. So does anyone have any theories that would explain this problem? Other tests I should try? Thanks!

    Read the article

  • Best format for hard drive for Windows and Mac?

    - by Neil
    I have a 500 GB USB External Hard Drive. I need four partitions on it, for the following purposes: 160 GB for a bootable backup of my Mac. 160 GB for a bootable backup of my Windows. 11 GB for a bootable Snow Leopard Install Disk Rest as for file storage. Now I need a partition table which will get recognised on both Windows and Mac, without needing extra software on Windows, which will let me keep bootable copies of both OS'es, but let me access the file storage from both OS'es. Currently, I have a GUI Partition Table, with Mac OS Extended (Journaled) Partitions for the two backups, Mac OS Extended for the Install Disk, and NTFS for the file storage. While this gets recognised perfectly on my Mac, thanks to an NTFS for Mac driver from Paragon, when connected to Windows, the drive is detected by the machine (listed in Safely Remove USB), but not recognised in Windows Explorer unless I install MacDrive, which is not feasible for me to install on public Windows Machines I might wanna access my storage area on. Can someone recommend the best combination of formats and software/drivers to get this done seamlessly?

    Read the article

  • How to set up multiple video cards in Windows XP

    - by Swish
    All I am trying to do is run a three monitor setup, two widescreens on the good card at high res and a third smaller monitor at 1024x768 that I watch continuously updating info in. I have a Dell Vostro 200 with an HIS Radeon HD 4670 video card in the PCI-e slot. I need an additional video card that will work in an available PCI slot. I Had a Nvidia GeForce 5200 that was installed but due to what I'm assuming was a compatible driver issue (because it was Nvidia not ATI) it wouldn't run at more than 640x480 4bit color when installed simultaneously with the HIS card. Previously I used the Nvidia with the onboard Intel video to run a third monitor, but now that the HSI uses PCI-e the onboard has to be disabled. I tried a Radeon 9200 PCI card that I found (microsoft made I think) with it and only that or the HIS card could be enabled at the same time. When both were in the HIS card said "The device cannot start". SO, based on the fact that I got the Nvidia to work (although very poorly) with the new HIS Radeon HD 4670 PCI-e I know it's possible, just don't know what type of card I need to use. Any ideas?

    Read the article

  • Nvidia GTX 660m crashes games

    - by dcap
    I just recently bought a Lenovo y580 with both HD intel graphics and an Nvidia GTX 660m. It works great except for one thing: playing games. Every time I load a game, either with Steam or Games for Windows Live, games will end up crashing. I've already talked with lenovo tech support and they couldn't help other than send my new laptop for repair which would take 7 days. So before I do that I thought I'd ask around. These are the games I've tested and what happens when they load: Civilization V: Game loads fine but once it gets loaded to the game, there's noticeable "tearing" popping up and certain things flash. Within a minute of this, the game crashes. Does the same thing regardless if Vsync is on or off. Total War Shogun2: Game gets to the menu screen. The background of the menu screen shows what is expected - slideshow of in-game environments rendered on high settings (this is expected). However, within 2 seconds of the menu loading up it crashes. Age of Empires 3 (Non-steam): This game is several years old so it should work on this brand new laptop fine. However the results are similar to that of Civilization V. Noticeable "Tearing" and after a few seconds it'll freeze/crash. I've done tests on all these games with both the latest stable Nvidia driver 285 as well as the nightly build 307. In addition, Nvidia control panel is set on using the dedicated graphics card for all programs. So is there anything I can do to fix this or will I have to send it back for a week to tech support?

    Read the article

  • MSSQL 2008 login failed for windows authentication

    - by Force Flow
    I'm running Microsoft SQL 2008 on a Windows 2008 Server. The MSSQL server server authentication is set to SQL Server and Windows Authentication mode. I have created an active directory security group "xyz app users". I have added a normal user (without any active directory admin privledges) and a user with domain admin privledges to the "xyz app users" group. I have added the group to the MSSQL management console as a login user. This group is a member of the public server role and is mapped to two databases. On a workstation, when the normal user is logged in, I configure a DSN ODBC connection, and I'm able to successfully create the DSN and test the SQL connection. However, when I'm logged in as the user with domain admin privledges, when I attempt to configure the DSN ODBC connection, I can't get past the login ID configuration screen. If I select "windows authentication" and click "next", I get an error: Connection failed: SQLState: '28000' SQL Server Error: 18456 [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'mydomain\myuser' On the server's application event logs, this error appears: Login failed for user 'mydomain\myuser'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: 172.x.x.x] And in MSSQL's event logs: Error: 18456, Severity: 14, State: 11 Solutions that I've seen so far do not seem to fit this situation (some solutions I've seen are only applicable when the BUILDIN\Administrator is being used locally on the server, which is not the case here).

    Read the article

  • Computer will freeze/ lock up after doing relatively stressful things

    - by GrowingCode247
    I'll first start off by saying that the issue GENERALLY doesn't occur unless I'm doing something remotely stressful for my computer. This issue used to occur whenever it felt it was necessary, however has not occurred completely randomly for a while now (thankfully) My computer's specs: CPU: AMD Phenom II X4 960T GPU: GeForce GTX 760 Memory: 16 GB RAM Resolution Used: 1680x1050, 59Hz (strange number for refresh rate?) res is highest for monitor Nvidia Driver version: 331.65 OS: Microsoft Windows 7 Ultimate (64-bit) Sometimes I will be able to go 2-3 games (about an hour, depending) and sometimes it will go maybe one game (20-30 minutes) and then my computer will run sluggishly and leave me unable to do much of anything. I can sometimes interact with programs at a very basic level (maximizing, minimizing), and I usually cannot close them in any way, not even through Task Manager. The highest temperature my GPU reaches is 76C, with the average being around 73C. During the time the temperatures are around 73C, my GPU's RAM usage is anywhere between 1250-1300 (out of 2GB). My CPU's temperature never goes over 60C, thankfully. The PSU should be fine. It's very mildly dusty but I feel as though that would not be causing this problem... I will clean it out as soon as everything else has been ruled out. Honestly I have no clue how to test the PSU for problems - same goes for my Motherboard. I cannot really think of what could be causing these freezes otherwise. Event Viewer details: EventID: 1 - VDS Basic Provider (I've no clue what this is) EventID: 3 - Kernel-EventTracing (Again, lost) EventID: 8003 - bowser (this seems fishy) and the one critical that I know others have been dealing with as I've browsed some other responses on the web: EventID: 41 - Kernel-Power any help to solve this problem would be GREATLY appreciated.

    Read the article

  • I really need help resolving a Window Vista BSOD (Blue Screen Crash) on my desktop

    - by anonymous
    Hi, thanks for taking the time to read this. I'll get straight to the details. My desktop is on the fritz; it keeps going to blue screen with the stop message of 0x0000007E immediately after the loading bar of vista, right before transitioning to the account selection screen. My desktop runs on a dual-core 32-bit processor with windows Vista Home(?) installed. I have 3 GB of ram as two separate modules, a 1GB acer module and a 2GB geil module. I have an ati video card, unfortunately I cannot recall the exact name but the chipset is ATI and the manufacturer is Sapphire and the card is on the lower end. My hard drive is 320GB (i think) partitioned into two. The C:\ partition is red lined, while the D:\ partition is still pretty empty. As per the advice of my friend, i tried restarting the system with the graphics card removed. Upon failure, i repeated the process removing one RAM module one at a time, but the system still failed to load. Vista would attempt to repair the system and it would initially report that the system was fixed, but vista really failed to fix the problem. After removing the memory modules, vista started to report it's inability to fix the problem. I tried running on safe mode and the driver listing would always stop at crcdisk.sys. I ran memory diagnostics using the windows memory diagnostic tool found in the screen after vista's failed attempt to fix the problem with no luck. the problem details are as such: Problem Event Name : StartupRepairV2 Problem Signature 01: AutoFailover 02: (vista's version number?) 03: 6 04: 720907 05: 0x7e 06: 0x7e 07: 0 08: 2 09: WrpRepair 10: 0 OS Version: 6.0.6000.2.0.0.256.1 Locale ID 1033 any correct advice would be appreciated as i really need my pc to work so i can work on my projects. kinda sad, but i'm college of computer science and i have no idea what to do :P

    Read the article

  • Printer spools but doesn't print

    - by DKNUCKLES
    I am having a bizarre issue with an end user who is unable to print to a USB attached printer. The environment is as Windows 7 machine with a Canon Pixma iP90 printer. The driver is installed (and has been re-installed several times), but whenever a print job is sent the printer spools but no printing ever occurs. The following is some relevant information I can confirm that the printer is spooling as the spool folder fills up, and the job "releases" and the spool folder empties I have turned off print spooling with no luck None of the features from the Canon utilities (ie Turn Printer Off) features work Computer recognizes the printer as being installed. When the cable is unplugged the printer icon grey's out in Devices and Printers Printer and cable are confirmed working as they work with other PC's in the office I have deleted the USB Root Hub devices and rebooted the machine with no luck No error messages are displayed or logged in the event viewer. The Canon diagnostics utility doesn't detect any problem and states the printer is functioning properly Printer is not shared User is able to print to other shared printers in the office Any help with this issue would be greatly appreciated.

    Read the article

  • How are large companies handling the storing and cataloging of software installation disks?

    - by CT
    I just started working in the IT department of a small-medium sized construction company with about 200 users. One of my responsibilities is to setup and configure all new machines that come in. I would like suggestions on how to best manage the installation disks and licenses of the software that comes with them. Plus any additional licensed software such as Autocad, Photoshop, etc as well as peripheral driver disks such as printers and scanners. Right now every machine is associated and labeled with an asset id. All asset ids are kept in a spreadsheet with applicable serial numbers, current user, warranty info, and software licenses. The physical disks are then kept within a folder in a cabinet. Each folder is marked with the asset id number as well as the current user. My problems with this is that the system was not maintained very completely before I came to the company. There are plenty of software folders with no asset ids labeled on them. Plenty of missing software folders (most likely are a lot of the unlabeled folders). Folders with names but not asset ids. Machines get switched to different users without the folders and spreadsheet being updated. I am not saying this method would necessarily be bad if it was better implemented and managed, but if I am going to have to take a lot of time to fix this system currently in place. I thought I would ask the community first on how others manage this process in case there are easier, more efficient ways of doing so. Thank you.

    Read the article

  • Toshiba Satellite C665 Rebooting from Standby

    - by Coodu
    I currently am working on a C665 with a strange issue. When the panel is closed the notebook will put itself to sleep in the usual way, and the power LED changes to the pulse to indicate that the device is asleep. However, when the panel is opened to resume using the notebook, the system will restart itself, instead beginning from the Toshiba logo and proceed to boot back in to W7. I should also note that each time this occurs, the "Windows Startup Recovery" option occurs, indicating that the system was not shut down correctly. Some things I have tried: Updated to latest Toshiba BIOS. Returned BIOS settings to their defaults. Swapped Memory to known good module, tested KGM in both memory slots within system. Confirmed that power settings are set to sleep/wake when power button is pressed. Ran a quick HDD fitness test using a parted magic USB stick. Checked for BSOD logs using BlueScreenView, none found. Ran src, no violations found. Any ideas? I have a good feeling the system is restarting itself, but in the event viewer there is a "Kernel Power" error, but it simply says "The system was not shut down correctly." Perhaps a bad driver? I'm not sure. Any advice would be great.

    Read the article

  • Windows 7, network transmit (send) not working

    - by user326287
    My Win 7 works 2 years without problem. But now, I can't transmit (send) big data on LAN/Internet. I can: - Ping anything - Browse Internet, download files at full speed - Send e-mails with very small attachments. - Testing download speed on Speedtest.net, measure stable full speed. I can't: - Testing upload speed on Speedtest.net. Upload stuck.. - Save/send email messages with big (128k) attachment, independent from e-mail provider or e-mail box. THIS IS NOT A HARDWARE/CABLE/CARD OR OTHER NETWORK DEVICES PROBLEM! When I boot from a Linux Live CD, without ANY hardware change, all data sending, testing works correctly, at full speed. I have tried already in Win 7: - Disable Windows/3rd party Firewall completely - Reset IP stack parameters (netsh int ip reset c:\resetlog.txt) - Computer restore - Reinstall LAN driver When I inspect the packets in Wireshark in Windows, I see lot's of (maybe 60% of sent packets) "TCP Retransmission". Sometimes receive "TCP Dup Ack" or "TCP Out-of-Order". Linux don't do this. Thank you for the help.

    Read the article

  • Strange network issue (ZIP file fails CRC test over VPN)

    - by Joe Schmoe
    We have a server in the office running Windows Server 2003 Our office is connected to our datacenter via hardware VPN (Linksys RV082 router in the office to CISCO router in the datacenter). There is a job that runs on the server in the office that does following: ZIP certain files from the server using 7Zip, copy ZIP file to a network share in the office and verify ZIP integrity, copy ZIP file to a network share in the data center and verify ZIP integrity. Problem is - verifying ZIP integrity for the file in the data center always fails. However, if I run 7Zip on the server in data center that exposes that share ZIP file verifies just fine, so it is not actually corrupted during copy operation. Additionally, I tried running ZIP on other computers in the office to verify ZIP file on datacenter file share and it verifies OK. I tried plugging server to the same network port where my workstation is connected using different cable (my workstation doesn't exhibit this problem) and ZIP verification still fails. So the problem is local to that specific server. On network adapter properties for the server in question there is no "Advanced" tab where one can usually configure a lot of network settings. Network card driver is up to date (Windows Update doesn't find anything newer and Lenovo website doesn't have any drivers for Windows 2003 for this computer model). Is there any other way to configure network setting via command line? What settings could be relevant to this problem?

    Read the article

< Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >