Search Results

Search found 6815 results on 273 pages for 'micro sd card'.

Page 26/273 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• Determining Maximum Txpower a WiFi Card Supports?

  - by BigGenius

  I have a Atheros R9285 wifi card. How can i determine , what is max. Txpower it can support? biggenius@hackbook:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"Default" Mode:Managed Frequency:2.437 GHz Access Point: 00:08:5C:9D:4F:40 Bit Rate=2 Mb/s Tx-Power=35 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=24/70 Signal level=-86 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:140 Invalid misc:247 Missed beacon:0 eth0 no wireless extensions. biggenius@hackbook:~$ iw phy0 info Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-7 Frequencies: * 2412 MHz [1] (35.0 dBm) * 2417 MHz [2] (35.0 dBm) * 2422 MHz [3] (35.0 dBm) * 2427 MHz [4] (35.0 dBm) * 2432 MHz [5] (35.0 dBm) * 2437 MHz [6] (35.0 dBm) * 2442 MHz [7] (35.0 dBm) * 2447 MHz [8] (35.0 dBm) * 2452 MHz [9] (35.0 dBm) * 2457 MHz [10] (35.0 dBm) * 2462 MHz [11] (35.0 dBm) * 2467 MHz [12] (35.0 dBm) * 2472 MHz [13] (35.0 dBm) * 2484 MHz [14] (35.0 dBm) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps Band 2: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-7 Frequencies: * 5180 MHz [36] (35.0 dBm) * 5200 MHz [40] (35.0 dBm) * 5220 MHz [44] (35.0 dBm) * 5240 MHz [48] (35.0 dBm) * 5260 MHz [52] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5280 MHz [56] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5300 MHz [60] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5320 MHz [64] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5500 MHz [100] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5520 MHz [104] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5540 MHz [108] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5560 MHz [112] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5580 MHz [116] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5600 MHz [120] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5620 MHz [124] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5640 MHz [128] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5660 MHz [132] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5680 MHz [136] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5700 MHz [140] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5745 MHz [149] (35.0 dBm) * 5765 MHz [153] (35.0 dBm) * 5785 MHz [157] (35.0 dBm) * 5805 MHz [161] (35.0 dBm) * 5825 MHz [165] (35.0 dBm) Bitrates (non-HT): * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0x1 RX 0x3 Configured Antennas: TX 0x1 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point * P2P-client * P2P-GO software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ managed, WDS, P2P-client } <= 2048, #{ AP, mesh point, P2P-GO } <= 8, total <= 2048, #channels <= 1 Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * Unknown command (82) * Unknown command (81) * Unknown command (84) * Unknown command (87) * Unknown command (85) * testmode * connect * disconnect Supported TX frame types: * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 Supported RX frame types: * IBSS: 0x00d0 * managed: 0x0040 0x00d0 * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * mesh point: 0x00b0 0x00c0 0x00d0 * P2P-client: 0x0040 0x00d0 * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 Device supports RSN-IBSS.

  Read the article

• Bindable richTextBox still hanging in memory {WPF, Caliburn.Micro}

  - by Paul

  Hi, I use in WFP Caliburn.Micro Framework. I need bindable richTextbox for Document property. I found many ways how do it bindable richTextBox. But I have one problem. From parent window I open child window. Child window consist bindable richTextBox user control. After I close child window and use memory profiler view class with bindabelrichTextBox control and view model class is still hanging in memory. - this cause memory leaks. If I use richTextBox from .NET Framework or richTextBox from Extended WPF Toolkit it doesn’t cause this memory leak problem. I can’t identified problem in bindable richTextBox class. Here is ist class for bindable richTextBox: Base class can be from .NET or Extended toolkit. /// <summary> /// Represents a bindable rich editing control which operates on System.Windows.Documents.FlowDocument /// objects. /// </summary> public class BindableRichTextBox : RichTextBox { /// <summary> /// Identifies the <see cref="Document"/> dependency property. /// </summary> public static readonly DependencyProperty DocumentProperty = DependencyProperty.Register("Document", typeof(FlowDocument), typeof(BindableRichTextBox)); /// <summary> /// Initializes a new instance of the <see cref="BindableRichTextBox"/> class. /// </summary> public BindableRichTextBox() : base() { } /// <summary> /// Initializes a new instance of the <see cref="BindableRichTextBox"/> class. /// </summary> /// <param title="document">A <see cref="T:System.Windows.Documents.FlowDocument"></see> to be added as the initial contents of the new <see cref="T:System.Windows.Controls.BindableRichTextBox"></see>.</param> public BindableRichTextBox(FlowDocument document) : base(document) { } /// <summary> /// Raises the <see cref="E:System.Windows.FrameworkElement.Initialized"></see> event. This method is invoked whenever <see cref="P:System.Windows.FrameworkElement.IsInitialized"></see> is set to true internally. /// </summary> /// <param title="e">The <see cref="T:System.Windows.RoutedEventArgs"></see> that contains the event data.</param> protected override void OnInitialized(EventArgs e) { // Hook up to get notified when DocumentProperty changes. DependencyPropertyDescriptor descriptor = DependencyPropertyDescriptor.FromProperty(DocumentProperty, typeof(BindableRichTextBox)); descriptor.AddValueChanged(this, delegate { // If the underlying value of the dependency property changes, // update the underlying document, also. base.Document = (FlowDocument)GetValue(DocumentProperty); }); // By default, we support updates to the source when focus is lost (or, if the LostFocus // trigger is specified explicity. We don't support the PropertyChanged trigger right now. this.LostFocus += new RoutedEventHandler(BindableRichTextBox_LostFocus); base.OnInitialized(e); } /// <summary> /// Handles the LostFocus event of the BindableRichTextBox control. /// </summary> /// <param title="sender">The source of the event.</param> /// <param title="e">The <see cref="System.Windows.RoutedEventArgs"/> instance containing the event data.</param> void BindableRichTextBox_LostFocus(object sender, RoutedEventArgs e) { // If we have a binding that is set for LostFocus or Default (which we are specifying as default) // then update the source. Binding binding = BindingOperations.GetBinding(this, DocumentProperty); if (binding.UpdateSourceTrigger == UpdateSourceTrigger.Default || binding.UpdateSourceTrigger == UpdateSourceTrigger.LostFocus) { BindingOperations.GetBindingExpression(this, DocumentProperty).UpdateSource(); } } /// <summary> /// Gets or sets the <see cref="T:System.Windows.Documents.FlowDocument"></see> that represents the contents of the <see cref="T:System.Windows.Controls.BindableRichTextBox"></see>. /// </summary> /// <value></value> /// <returns>A <see cref="T:System.Windows.Documents.FlowDocument"></see> object that represents the contents of the <see cref="T:System.Windows.Controls.BindableRichTextBox"></see>.By default, this property is set to an empty <see cref="T:System.Windows.Documents.FlowDocument"></see>. Specifically, the empty <see cref="T:System.Windows.Documents.FlowDocument"></see> contains a single <see cref="T:System.Windows.Documents.Paragraph"></see>, which contains a single <see cref="T:System.Windows.Documents.Run"></see> which contains no text.</returns> /// <exception cref="T:System.ArgumentException">Raised if an attempt is made to set this property to a <see cref="T:System.Windows.Documents.FlowDocument"></see> that represents the contents of another <see cref="T:System.Windows.Controls.RichTextBox"></see>.</exception> /// <exception cref="T:System.ArgumentNullException">Raised if an attempt is made to set this property to null.</exception> /// <exception cref="T:System.InvalidOperationException">Raised if this property is set while a change block has been activated.</exception> public new FlowDocument Document { get { return (FlowDocument)GetValue(DocumentProperty); } set { SetValue(DocumentProperty, value); } } } Thank fro help and advice. Qucik example: Child window with .NET richTextBox <Window x:Class="WpfApplication2.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Window1" Height="300" Width="300"> <Grid> <RichTextBox Background="Green" VerticalScrollBarVisibility="Auto" HorizontalScrollBarVisibility="Auto" FontSize="13" Margin="4,4,4,4" Grid.Row="0"/> </Grid> </Window> This window I open from parent window: var w = new Window1(); w.Show(); Then close this window, check with memory profiler and it memory doesn’t exist any object of window1 - richTextBox. It’s Ok. But then I try bindable richTextBox: Child window 2: <Window x:Class="WpfApplication2.Window2" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:Controls="clr-namespace:WpfApplication2.Controls" Title="Window2" Height="300" Width="300"> <Grid> <Controls:BindableRichTextBox Background="Red" VerticalScrollBarVisibility="Auto" HorizontalScrollBarVisibility="Auto" FontSize="13" Margin="4,4,4,4" Grid.Row="0" /> </Grid> </Window> Open child window 2, close this child window and in memory are still alive object of this child window also bindable richTextBox object.

  Read the article

• GTX 280 purple snow on bootup, card works without drivers

  - by Brokar

  i have owned a ASUS GTX280 for 3 years now. The card has been great all along but i started having problems 10 days ago. I was playing Diablo 3 for 1 week on max settings no problems, then suddenly my display kept getting some weird purple/colours as soon as i booted and logged into windows. Went into safe mode, updated drivers and it kept crashing. Formatted PC, fresh windows install with new WHQL drivers again same problem. Uninstalled nvidia drivers and pc has been running great for 4 days now, ofcourse i cannot run games but everything works on 1680x1050 resolution and i can browse internet,watch movies and use my PC for everything but gaming. As soon as i install nvidia drivers PC won't boot. I only wanna game a few hours a week (very busy program with school this month so it might be a blessing that i cannot game) and i would love it if i could keep the card. I am looking to upgrde later on when i will have time for gaming but i wonder if i could still use the card somehow with different/new drivers (tried older drivers that came with the card on a CD aswell) tldr: PC works fine with no nvidia drivers (apart from gaming ofc). Once i install WHQL drivers or older ones, cannot even log into windows. Fix?

  Read the article

• can't access SATA card config screen on boot, nor access the disks

  - by Ronald

  We've just upgraded our file server using an ASUS P6T WS Pro board, running FreeBSD-RELEASE 8.2 and using zfs to manage 12 WD20EARS disks. Since our 3ware card has been giving us trouble we started using the six on-board SATA connectors and got a SuperMicro USAS2-L8i to provide eight more ports. Mechanically, the card is an awkward fit but electrically it all seems ok. Upon boot, the LSI controller shows up and states that pressing ctrl-c will bring up the LSI Config Utility. When doing that, the message changes to state that the utility will be started after initialization, however that never happens. There does seem to be an error message that's only displayed too briefly to read and seems to be about PCI and "not enough space". (That message is pushed off by a hardware summary and I've found no way to scroll back at this point.) The disks do not show up in any recognizable ways after booting, either. I found a hint in another discussion to check the address mapping on either the card or the motherboard BIOS, but have found no way to do that. So what I tried on a hunch is to disable everything that's on-board, including network adapters, Firewire controller and SATA. In fact, after doing that, I can successfully launch the LSI Config Utility. As far as I can tell, all looks well in there, and when booting in that configuration it also displays a list of the disks connected to it, which looks just fine as well. Only problem now is that I can't boot that way, because I need the on-board SATA controller and network adapters. As soon as I re-enable any of them I'm back to square one. That discussion I mentioned about mapping addresses said to try D000, then D7FF, then DFFF, in order. The LSI Config Utility shows the card address as D000 but offers no way of changing it. Any tips or insights would be appreciated.

  Read the article

• Network card shuts down when stressed

  - by user142485

  I have a network card that functions fine with light use, but quits functioning after heavy use. I replaced it with a brand new one and still have the same issue, also updated drivers. It is a wired D-Link card. The Internet seems fine for a small amount of web browsing but when I run a bandwidth test it starts out fast and slows quickly until the card completely quits; I have a constant ping of the gateway going while I run this and it starts timing out after a couple seconds into the speed test. The card will stay on and the data light on it still flashes some but I cannot ping the gateway or anything else until the computer is rebooted. When I boot into safe mode I can browse and run the speed test fine with no problems. I am guessing that this is probably some program that is loading in regular mode but not safe mode that is causing the issue? I have very limited software (turned off av and firewall) on the computer but I am thinking that I'll just have to start eliminating start-up programs and see if that helps. This is on Windows 7 if that makes any difference. Anyone had a similar issue or have any other suggestions/ideas for narrowing down this problem?

  Read the article

• AMD processors witn graphics card bundled [closed]

  - by shybovycha

  Sorry for posting this question here - just don't know to which StackExchange website i should be writing. I've heard AMD created processors with video card bundled. So now these processors should work as fast as just usual processors with discrete video card but AMD's ones should use less power and spread less warm. Some googling around gave me the result like "AMD processors of A-series". They were mentioned to be build using that technology i described above. But on the other hand, we have a small rate of publishing and not-very-good quality of AMD drivers. I am a game-developer and web-developer so i need a powerful processor and graphics card and a lot of RAM on board (to make it possible to create a sample Grails application, for example or to create some 3D models in Maya/Cinema4D, for instance). Still i want my battery to be a long-living one, so power usage is a bit critical for me. So, my questions are: are there any processor building technology like i've described and which series they are (if they exist)? which processor shall fit the laptop the best: AMD one or i5/i7 on with nVidia graphics card for the purposes mentioned above?

  Read the article

• Lag when recording with xvidcap?

  - by quangtruong1985

  I used Xvidcap to record my desktop, but the quality of video was too bad (it lagged so much). I also tried with all output formats that xvidcap support, increase the frame-per-second as much as possible and the quality always at 100% but nothing changed. Click to see my video on Youtube Im using 11.04 (unity) with compiz enabled. My card is ATI/AMD Mobility 5450 and all drivers were installed and activated. Please help me! Regards.

  Read the article

• How to install windows without graphic's driver?

  - by Mike Redford

  My notebook's(Compaq Presario V5000) graphic card damaged last week and after that it will be restarted when I want to boot. So I tested it via windows live, and it booted from CD without any problem (as you know in win live, the graphic card doesn't recognize, and in setting of graphic card write : unknown ) Now my question : Is there anyway to install windows without any graphic driver please ?for example, Should I delete some installation files ?! PS : I tested Windows XP , VISTA and 7 but, when it goes to GUI installation restarted again :( Thanks for your help

  Read the article

• NVIDIA same chipset, but different implementations - what is the difference?

  - by Horst Walter

  I have planned to buy a graphics card. When searching for a particular chipset (e.g. GTX 460) I find cards of different vendors (i.e. Gigabyte, Palit, PNY, ...). I can figure out differences in frequency, memory, and equipment. When I read test reports, usually a particular NVIDIA card is compared with its ATI/AMD "counterpart" - have not really found a comparison of all vendors for a particular NVIDIA chipset. So in order to make a decision: a) Are the drivers all the same for all the cards of a particular chipset (and provided by NVIDIA or the vendor?) b) How to figure out which card actually to buy. OK, I choose chipset, and memory, and check the card has the required ports, but then ....

  Read the article

• HP Envy 14, Ubuntu 10.10 and trouble with the graphics cards

  - by Carsten Gehling

  A few days ago I bought a HP Envy 14, containing 2 graphics card: An integrated Intel graphics card, and an ATI HD 5650. I've installed Ubuntu 10.10 32-bit on the machine. Most things work fine out of the box, but the graphics cards are giving me trouble. When booting, I get the message "failed to get i915 symbols, graphics turbo disabled". Then the screen blanks out during the remaining boot period. I am able to get the display working by changing to one of the consoles, then closing and opening the laptop's lid. It seems that Ubuntu gets confused about which card to use. I've read here: http://www.andreas-demmer.de/en/2010/07/18/testbericht-linux-auf-dem-hp-envy-14 that I should be able to turn off one the cards by echoing keywords into /sys/kernel/debug/vgaswitcheroo/switch, but that path is not available on my system. The BIOS does not have any methods to switch of the ATI card. Help anyone? /Carsten

  Read the article

• HP Envy 14, Ubuntu 10.10 and trouble with the graphics cards

  - by Carsten Gehling

  A few days ago I bought a HP Envy 14, containing 2 graphics card: An integrated Intel graphics card, and an ATI HD 5650. I've installed Ubuntu 10.10 32-bit on the machine. Most things work fine out of the box, but the graphics cards are giving me trouble. When booting, I get the message "failed to get i915 symbols, graphics turbo disabled". Then the screen blanks out during the remaining boot period. I am able to get the display working by changing to one of the consoles, then closing and opening the laptop's lid. It seems that Ubuntu gets confused about which card to use. I've read here: http://www.andreas-demmer.de/en/2010/07/18/testbericht-linux-auf-dem-hp-envy-14 that I should be able to turn off one the cards by echoing keywords into /sys/kernel/debug/vgaswitcheroo/switch, but that path is not available on my system. The BIOS does not have any methods to switch of the ATI card. Help anyone? /Carsten

  Read the article

• Building a PC for Work and play? [closed]

  - by Derek Organ

  Ok, Its been a long time since I build my own PC so I'm looking to get back into it again and build a new one. First off budget is about €800 excluding the monitor and windows 7 licence and mouse. (just bought a new g500) I plan on using my computer for work, lots of applications open at once but none particularly excessive (photoshop being the most demanding, mostly coding tools) I also use it for some gaming, e.g. COD, Starcraft etc. One thing I do want to do eventually is get a really good monitor with hight resolution and maybe 27" so the graphics card needs to be able to make best use of that. So a few questions 1) Is the bottle neck in performance mostly still the harddrives? 2) Aren't most processors e.g. i5 etc even i3 so far a head of other bottlenecks it makes litte difference the higher you go. Isn't the Graphics card dealing with heavy graphics so what really slows because of a slow CPU? So from this my thinking is to get a SSD drive as my primary drive for OS etc and have loads of memory e.g. 6-8GB and a decent mid level graphics card? It doesn't seem at my level worth spending much on CPU and any other parts really. I basic parts off the top of my head Case, Motherboard CPU SSD Drive SATA Drive Power Supply Memory Cooling (fan?) Graphics Card Network Card Keyboard DVD drive Mouse Windows Monitor Am I missing anything? Any helpful tips or general education much appreciated. Thanks, Derek

  Read the article

• 2 GPUs (for multi-monitor setup)

  - by A Dwarf

  I have a machine to which I need to connect a second monitor. This machine currently hosts a ATI Radeon HD 4770 with two DVI adapters. The second monitor to be hooked to this machine is a VGA monitor. Until I find a DVI-VGA adpater, I'm thinking installing a second graphics card which does have a VGA adapter, an NVidia card. Can I successfully run both AMD and NVidia cards on this machine? Any specifics I must be aware of, like how to ensure the ATI card to be the main card? Operating system is Windows 7

  Read the article

• USB Adapter for Memory Cards

  - by ktm5124

  I am looking for something like a USB adapter for video cards. It is a cable that on one end hooks into a USB port on a computer and on the other accepts any one of a variety of video cards. Essentially it's an "all-in-one" USB adapter for video cards. I'm told that they are sold all over... does anyone know what it is called or where to find them? I should clarify, by the way, that by "video card" I mean a memory card for a video camera, and that the goal is to read this video data onto a computer, from a variety of video card types, through a USB port. That way if you go to your friend's house and bring your computer, you can transfer the video data on his video camera to your computer, trusting that the adapter will have a slot for his kind of video card.

  Read the article

• Radeon HD4850 serious issues when using DirectX 10

  - by ricsmania

  Hello, I have a problem with my video card. Whenever I run a DirectX 10 game, it works for a few seconds (10 or so) and then starts displaying nothing but big polygons. I have tested this with Crysis and Resident Evil 5, both have the same problems. The same games running under DirectX 9 work fine, except for some small black squares once in a while. I have the following specs: Asus P7P55D LE Intel Core i5 750 Sapphire Radeon HD4850 1GB 2x2GB Patriot Viper II Sector 5, DDR3 1600 MHz OCZ Stealth X Stream 500SXS 500W At first I thought it could be the video card overheating (it has stock cooling), but the game crashes even when it's running at 50 degrees C, and it's never been higher than 70. I also thought it could be the PSU, but as far as I know 500W is enough for this computer, especially because I haven't overclocked anything. My OS is Windows 7 X64 and I am using Catalyst 10.10, but I have also tried many older versions with no success. I don't think there is a problem with the card itself, or else it wouldn't run DirectX 9 games I believe. I have spent many hours searching for a solution but I couldn't, so any help is appreciated. Thank you. EDIT: I did some further investigation about the problem, and it seems taspeotis was right, it might be related to memory. I slightly underclocked the memory from 993 to 965 MHz and the problem went away completely. Both the black squares using DirectX 9 and the weird polygons using DirectX 10. I was using RE DirectX 10 Benchmark, as it consistently crashed around the same point, and now I can play the full benchmark with no artifacts at all. Unfortunately, the underclock has an obvious hit in performance. Although it's not critical, it's definitely noticeable. So, if the video memory test software showed no erros, but the card needs an underclock to work, what might be the problem? Temperature? Voltage? By the way, I couldn't find what the default voltage for this card is. And what is a good software to try and increase it? I tried Ati Tray Tools but it has a bug that increases the clock speed dramatically whenever I change something in the Overclock tab, so I'm afraid it might fry my card. Worst case scenario, if I don't find I solution I will try to slightly increase the GPU clock to compensate for the memory clock. Thank you again.

  Read the article

• How can I get my Sapphire Radeon 7850 to output in "1080p"?

  - by Fr33dan

  I have a Radeon 7850 connected to a Vizio 3D compatible TV. The TV has a function to parse and display SBS encoded content. On my old graphics card (a Radeon 5770) I just had to select the 1080p option in the catalyst control center. In this mode my TV reported the output mode as "1080p", with the new card the TV reports "1920x1080". I cannot figure out what the difference in between the 2 signals but the "1920x1080" cannot be switched into 3D mode by the TV. Weirdly, before windows starts the (in the Bios and so forth) the computer outputs in "1080p" so I know the card is capable of it. As soon as the blue login screen comes up though it changes back to the "1920x1080". I've tried everthing I can think of. Updated my drivers from 13.3b3 to 13.4, then even tried the 13.5 beta (Which I'm still on this moment). Tried all the "optimized" HD settings in catalyst, even the 720p modes show the resolution from the TV and not the "720p" (which it used to do on the old card when I had to lower the resolution of games)

  Read the article

• Multiple Graphics cards - Non Multi-Display Setup

  - by Alan Thomas

  Is it possible for me to utilize the processing capabilities of multiple graphics cards, even if I'm only using one monitor? I recently bought a new AMD graphics card, fairly top of the line. I also have a two year old, decent nVidia card. They're obviously very different cards. I don't really mind for gaming because my current card can handle most games fine by itself. I'm concerned about video editing programs such as Adobe Premiere and After Effects. Would the system be able to utilize the power of both cards to, say, render a video? I have both drivers still installed on my machine. And because there is only one monitor connected to my current graphics card (AMD) the nVidia would be connected to no display. So I am wondering whether it would or could be utilized in some way to help in processing video. Thanks!

  Read the article

• Intel hd or Mobility Radeon?

  - by Absolute0

  I have decided to get a new Dell Studio 15 laptop. They have an option of adding a "ATI Mobility Radeon™ HD 4570, 512MB" card for an extra $100 instead of the included "Intel HD Graphics" card. How do the two compare? The laptop comes with an Intel Core i3 processor, maybe the Intel graphics card would be more compatible with the processor since they're made by the same manufacturer? Thanks in advance!

  Read the article

• Why are graphics cards upside-down?

  - by gbjbaanb

  This is something that has always bugged me - when I install a card into a desktop (ie mini tower) case, the fan is always facing down. Surely, making the card so the components and fan is on the top would help a lot with cooling, allowing those whiney fans to spin a little slower. I know some card manufacturers tried to mitigate this by adding heat pipes and big heatsinks on the back of the card.. but they still put the bits on the same way as everyone else! So, does anyone know why they're all upside-down?

  Read the article

• If I run two monitors from two different graphic cards, can I still have Twinview?

  - by rumtscho

  I am planning to get a second 2560x1440 monitor for home. The trouble is, I only have 1xDVI, 1xVGA on my graphics card (a 250 GT). I don't want to buy a new graphics card until the prices for the 500 series have stabilized, so probably not before summer (or will it happen earlier? I don't remember how it was for other series, and I couldn't find long-term price history for video cards). The solution I had in mind is to get the 7600 GS from my old PC, which also has 1xDVI, 1xVGA, and run each monitor on a separate card. I have never done that, and I was wondering 1. If I will be able to run the monitors in Twinview then, or will I be stuck with separate X sessions, and 2. Whether there are some other disadvantages as compared to a single-head graphics card. (I am using the proprietary driver because I need compiz). As an aside, how do I find out whether the DVI port on the old graphics card is dual link?

  Read the article

• Upgraded to a GTX 580 - no video signal on boot

  - by MGOwen

  I have: New Corsair 550w PSU (should be more than enough) AsRock H61M u3s3 mobo (with latest updated BIOS) Just replaced my faithful HD 7790 GPU with a refurbished EVGA GTX 580 1.5GB. When I boot, it sounds like the PC boots to windows, and the 580's fan is spinning, but I can't get any video signal from the card. Old card and integrated graphics still work fine (when I replace and use those instead). I am using the DVI ports on the card with a DVI-VGA adapter until I can get my hands on a mini HDMI adapter tomorrow. Anyone ever heard of a GPU needed something special to make the VGA signal work? Hold down a key on startup or something? I can't even find a manual for this card.

  Read the article

• Are there any OpenGL implementations which can use a server to do the rendering?

  - by user1973386

  Assume I have 2 independent machines, one running Debian sid, and the other running Windows 7. The one running Debian sid has a decent graphics card, the Windows 7 machine has no graphics card and a weak processor. The two are connected over a fast local network. Are there any OpenGL implementations, where Windows 7 would use the Debian machine's graphics card to do OpenGL rendering "over the network"?

  Read the article

• How do I load an image from sd card into coverview

  - by Jolene

  I am doing an application which consists of a cover flow. Currently I am trying to make the cover flow images be obtained from the sd card. But I am not exactly sure how should I display the image. this is the image adapter: public class ImageAdapter extends BaseAdapter { int mGalleryItemBackground; private Context mContext; private FileInputStream fis; private Integer[] mImageIds = { //Instead of using r.drawable, i need to load the images from my sd card instead R.drawable.futsing, R.drawable.futsing2 }; private ImageView[] mImages; public ImageAdapter(Context c) { mContext = c; mImages = new ImageView[mImageIds.length]; } public int getCount() { return mImageIds.length; } public Object getItem(int position) { return position; } public long getItemId(int position) { return position; } @TargetApi(8) public View getView(int position, View convertView, ViewGroup parent) { int screenSize = getResources().getConfiguration().screenLayout & Configuration.SCREENLAYOUT_SIZE_MASK; ImageView i = new ImageView(mContext); i.setImageResource(mImageIds[position]); switch(screenSize) { case Configuration.SCREENLAYOUT_SIZE_XLARGE: //Toast.makeText(this, "Small screen",Toast.LENGTH_LONG).show(); Display display4 = ((WindowManager) context.getSystemService(Context.WINDOW_SERVICE)).getDefaultDisplay(); int rotation4 = display4.getRotation(); Log.d("XLarge:",String.valueOf(rotation4)); /** LANDSCAPE **/ if(rotation4 == 0 || rotation4 == 2) { i.setLayoutParams(new CoverFlow.LayoutParams(300, 300)); i.setScaleType(ImageView.ScaleType.CENTER_INSIDE); BitmapDrawable drawable = (BitmapDrawable) i.getDrawable(); drawable.setAntiAlias(true); return i; } /** PORTRAIT **/ else if (rotation4 == 1 || rotation4 == 3) { i.setLayoutParams(new CoverFlow.LayoutParams(650, 650)); i.setScaleType(ImageView.ScaleType.CENTER_INSIDE); BitmapDrawable drawable = (BitmapDrawable) i.getDrawable(); drawable.setAntiAlias(true); return i; } break; default: } return null; } /** Returns the size (0.0f to 1.0f) of the views * depending on the 'offset' to the center. */ public float getScale(boolean focused, int offset) { /* Formula: 1 / (2 ^ offset) */ return Math.max(0, 1.0f / (float)Math.pow(2, Math.abs(offset))); } } and this is how i download and save the file. I need to use the image saved and upload it into my coverflow // IF METHOD TO DOWNLOAD IMAGE void downloadFile() { new Thread(new Runnable(){ // RUN IN BACKGROUND THREAD TO AVOID FREEZING OF UI public void run(){ Bitmap bmImg; URL myFileUrl = null; try { //for (int i = 0; i < urlList.size(); i ++) //{ //url = urlList.get(i); myFileUrl = new URL("http://static.adzerk.net/Advertisers/d18eea9d28f3490b8dcbfa9e38f8336e.jpg"); // RETRIEVE IMAGE URL //} } catch (MalformedURLException e) { e.printStackTrace(); } try { HttpURLConnection conn = (HttpURLConnection) myFileUrl.openConnection(); conn.setDoInput(true); conn.connect(); InputStream in = conn.getInputStream(); Log.i("im connected", "Download"); bmImg = BitmapFactory.decodeStream(in); saveFile(bmImg); } catch (IOException e) { e.printStackTrace(); }} }).start(); // START THREAD } // SAVE THE IMAGE AS JPG FILE private void saveFile(Bitmap bmImg) { File filename; try { // GET EXTERNAL STORAGE, SAVE FILE THERE File storagePath = new File(Environment.getExternalStorageDirectory(),"Covers"); storagePath.mkdirs(); filename = new File(storagePath + "/image.jpg"); FileOutputStream out = new FileOutputStream(filename); bmImg.compress(Bitmap.CompressFormat.JPEG, 90, out); out.flush(); out.close(); MediaStore.Images.Media.insertImage(getContentResolver(),filename.getAbsolutePath(), filename.getName(), filename.getName()); // ONCE THE DOWNLOAD FINISHES, CLOSE DIALOG Toast.makeText(getApplicationContext(), "Image Saved!", Toast.LENGTH_SHORT).show(); } catch (Exception e) { e.printStackTrace(); } }

  Read the article

• SQL SERVER – 2 T-SQL Puzzles and Win USD 50 worth Amazon Gift Card and 25 Other Prizes

  - by pinaldave

  We all love brain teasers and interesting puzzles. Today I decided to come up with 2 interesting puzzles and winner of the contest will get USD 50 worth Amazon Gift Card. The puzzles are sponsored by NuoDB. Additionally, The first 25 individuals who download NuoDB Beta 8 by midnight Friday, Sept. 21 (EST) will automatically receive a $10 Amazon gift card. Puzzle 1: Why following code when executed in SSMS displays result as a * (Star)? SELECT CAST(634 AS VARCHAR(2)) Puzzle 2: Write the shortest code that produces results as 1 without using any numbers in the select statement. Bonus Q: How many different Operating System (OS) NuoDB support? Click here HINT If you can solve above puzzles you will be eligible for winning USD 50 Amazon Gift Card. However, you can always enroll yourself for following Bonus Prizes where if you have good chance of winning USD 10 Amazon Gift Card (if you are first 25 individual in specific time). Bonus Prizes: The first 25 individuals who download NuoDB Beta 8 by midnight Friday, Sept. 21 (EST) will automatically receive a $10 Amazon gift card. Rules: Please leave an answer in the comments section below. You can resubmit your answer multiple times, the latest entry will be considered valid. The winner will be announced on 1st October. Last day to participate in the puzzle is September 28th, 2012. All valid answer will be kept hidden till September 28th, 2012. Only One Winner will get USD 50 worth Amazon Gift Card. The first 25 individuals who download NuoDB Beta 8 by midnight Friday, Sept. 21 (EST) will automatically receive a $10 Amazon gift card. The winner will be selected using random algorithm. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology Tagged: NuoDB

  Read the article

• Any mobile-friendly Credit Card billing solutions for mobile sites similar to Bango?

  - by Programmer

  Are there any mobile-friendly Credit Card billing solutions for mobile sites similar to Bango? The advantages of Bango I have seen compared to regular Credit Card solutions that make it considerably "mobile-friendly" are: 1) It does not require the user to enter their full name and billing address to make a payment. The user is only required to enter their Credit Card number, expiration date, and CVC code (if they are in the U.S., they will also have to enter their Zip Code). That is significantly less input than is normally required for Credit Card payments, which is a big plus on small mobile key pads. After a user makes an initial Credit Card payment, their details are stored by Bango, and the next time the user needs to make a payment with the same Credit Card, they just have to click a single link and it processes the payment on their stored Credit Card. Needless to say, this is very convenient for mobile users as it is analogous to Direct Carrier Billing as far as the user is concerned since they won't need to input any details. The downside with Bango is that their fees are higher than others, all payments must be processed via their site and branding, there is a high minimum ($1.99) and a low maximum ($30) on how much you can charge users, and you need to pay a monthly fee on top of the high transaction costs. It is due to the downsides mentioned above that I am looking for an alternative solution that also does the advantages 1) and 2) above. Is there anything like that? I looked at JunglePay and they do neither 1) nor 2).

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >