Search Results

Search found 8472 results on 339 pages for 'boot'.

Page 267/339 | < Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >

  • Can't display at full resolution on an external monitor from my MacBook.

    - by Ramblingwood
    I have a 24" Asus V246H and a new MacBook ($999 one). I am trying to display to display to my Asus at 1080p via VGA. So I boot up with the lid closed and the external monitor plugged in. Everything boots up fine, but the resolution is really low. So I go in and change the resolution to be 1920x1080. My monitor then has a blue box on it that says "OUT OF RANGE". Lower resolutions like 1024x768 work, but 1680x1050 doesn't. If I try mirroring my displays, the entire external monitor AND the entire laptop screen is completely garbled. I can make out some colors, but it is completely unusable. I am suspecting that it simply won't work via VGA, but I don't want to buy another adapter, and my PC is using the DVI port. Any solutions?

    Read the article

  • Various problems with software raid1 array built with Samsung 840 Pro SSDs

    - by Andy B
    I am bringing to ServerFault a problem that is tormenting me for 6+ months. I have a CentOS 6 (64bit) server with an md software raid-1 array with 2 x Samsung 840 Pro SSDs (512GB). Problems: Serious write speed problems: root [~]# time dd if=arch.tar.gz of=test4 bs=2M oflag=sync 146+1 records in 146+1 records out 307191761 bytes (307 MB) copied, 23.6788 s, 13.0 MB/s real 0m23.680s user 0m0.000s sys 0m0.932s When doing the above (or any other larger copy) the load spikes to unbelievable values (even over 100) going up from ~ 1. When doing the above I've also noticed very weird iostat results: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 1589.50 0.00 54.00 0.00 13148.00 243.48 0.60 11.17 0.46 2.50 sdb 0.00 1627.50 0.00 16.50 0.00 9524.00 577.21 144.25 1439.33 60.61 100.00 md1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 0.00 1602.00 0.00 12816.00 8.00 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 And it keeps it this way until it actually writes the file to the device (out from swap/cache/memory). The problem is that the second SSD in the array has svctm and await roughly 100 times larger than the second. For some reason the wear is different between the 2 members of the array root [~]# smartctl --attributes /dev/sda | grep -i wear 177 Wear_Leveling_Count 0x0013 094% 094 000 Pre-fail Always - 180 root [~]# smartctl --attributes /dev/sdb | grep -i wear 177 Wear_Leveling_Count 0x0013 070% 070 000 Pre-fail Always - 1005 The first SSD has a wear of 6% while the second SSD has a wear of 30%!! It's like the second SSD in the array works at least 5 times as hard as the first one as proven by the first iteration of iostat (the averages since reboot): Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 10.44 51.06 790.39 125.41 8803.98 1633.11 11.40 0.33 0.37 0.06 5.64 sdb 9.53 58.35 322.37 118.11 4835.59 1633.11 14.69 0.33 0.76 0.29 12.97 md1 0.00 0.00 1.88 1.33 15.07 10.68 8.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 1109.02 173.12 10881.59 1620.39 9.75 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.41 0.01 3.10 0.02 7.42 0.00 0.00 0.00 0.00 What I've tried: I've updated the firmware to DXM05B0Q (following reports of dramatic improvements for 840Ps after this update). I have looked for "hard resetting link" in dmesg to check for cable/backplane issues but nothing. I have checked the alignment and I believe they are aligned correctly (1MB boundary, listing below) I have checked /proc/mdstat and the array is Optimal (second listing below). root [~]# fdisk -ul /dev/sda Disk /dev/sda: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00026d59 Device Boot Start End Blocks Id System /dev/sda1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sda2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sda3 4605952 814106623 404750336 fd Linux raid autodetect root [~]# fdisk -ul /dev/sdb Disk /dev/sdb: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dede Device Boot Start End Blocks Id System /dev/sdb1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sdb2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sdb3 4605952 814106623 404750336 fd Linux raid autodetect /proc/mdstat root # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb2[1] sda2[0] 204736 blocks super 1.0 [2/2] [UU] md2 : active raid1 sdb3[1] sda3[0] 404750144 blocks super 1.0 [2/2] [UU] md1 : active raid1 sdb1[1] sda1[0] 2096064 blocks super 1.1 [2/2] [UU] unused devices: Running a read test with hdparm root [~]# hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 664 MB in 3.00 seconds = 221.33 MB/sec root [~]# hdparm -t /dev/sdb /dev/sdb: Timing buffered disk reads: 288 MB in 3.01 seconds = 95.77 MB/sec But look what happens if I add --direct root [~]# hdparm --direct -t /dev/sda /dev/sda: Timing O_DIRECT disk reads: 788 MB in 3.01 seconds = 262.08 MB/sec root [~]# hdparm --direct -t /dev/sdb /dev/sdb: Timing O_DIRECT disk reads: 534 MB in 3.02 seconds = 176.90 MB/sec Both tests increase but /dev/sdb doubles while /dev/sda increases maybe 20%. I just don't know what to make of this. As suggested by Mr. Wagner I've done another read test with dd this time and it confirms the hdparm test: root [/home2]# dd if=/dev/sda of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 38.0855 s, 282 MB/s root [/home2]# dd if=/dev/sdb of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 115.24 s, 93.2 MB/s So sda is 3 times faster than sdb. Or maybe sdb is doing also something else besides what sda does. Is there some way to find out if sdb is doing more than what sda does? UPDATE Again, as suggested by Mr. Wagner, I have swapped the 2 SSDs. And as he thought it would happen, the problem moved from sdb to sda. So I guess I'll RMA one of the SSDs. I wonder if the cage might be problematic. What is wrong with this array? Please help!

    Read the article

  • Is there a clean way to tell Windows to release a volume?

    - by zneak
    Hey guys, I'm trying, under Windows 7, to run a virtual machine with VMWare Player from an OS installed on a physical partition. However, when I boot the virtual machine, VMWare Player says that it couldn't access the physical drive and has to abort there. This seems to be a generally acknowledged problem in the VMWare community, as Windows Vista introduced a compelling new security feature that makes it impossible to write to a raw drive without obtaining exclusive access to it. I have googled the issue and found a few workarounds. However, the clean ones seem to only work on whole physical disks, and not on partitions. So I would be left with the dirty solution. In short, it meddles with the MBR to erase any trace of the partitions to use, makes Windows forget about them, then restores the MBR so we can launch the VM. Is there a way to let VMWare acquire exclusive access to the partition without requiring me to nuke it away?

    Read the article

  • GNOME/KDE Linux entirely in RAM?

    - by František Žiacik
    Hi. I'd like to have very responsive linux but I also like modern, elegant and functional desktops like gnome or kde, not the lightweight ones like xfce or lxde. Once I tried PuppyLinux and was impressed by the responsivity when I clicked an application. In my Ubuntu, it bothers me much when I click chromium and must wait 5 seconds of disk flashing until main window appears. Or evolution or anything else. Is it possible to make GNOME or KDE run entirely in RAM like PuppyLinux (of course, I mean frequently used applications and services, not all) if you have enough of it? I don't care if boot time is longer. I tried using "preload" but it didn't help much.

    Read the article

  • How do I import Outlook 2007 accounts and rules and IE usernames and stored passwords from old HD?

    - by raya
    I had an older PC running Win7 and the motherboard died on me. I've since updated my PC to another Win7 machine running a RAID 0 along with my old HDD installed as an extra drive. The problem is, I need to somehow import my Outlook email accounts (10) and rules along with my IE usernames and adjacent stored passwords for all the sites I've visited. I don't want to have to recreate the wheel for all this data. What I've found is that I have to run regedit in order to do so, but I cannot seem to boot to the old drive in order to run regedit and export the files. Can someone please help me?

    Read the article

  • HELP! Free space not reclaimed after online resizing ext4 in Ubuntu 9.10

    - by TiansHUo
    My root partition was filling up, with only 500 mbs left, I wanted to resize my root partition from 20 Gb to 40Gb So I resized my partition by using these steps: Using Gparted to resize another partition to give space for the EXT4 Using fdisk, deleting the root partition (on /dev/sda2), and creating it again using the new size resize2fs /dev/sda2 Updating grub2 But now the problem is that although I can boot in my new partition and the new partition shows it is 40Gb, but the free size was still 500mb. So I booted from a LiveCD and checked with e2fsck -p /dev/sda2, it reported clean. So I added the -f flag (force check), still, the drive is full.

    Read the article

  • Development environment for embedded system

    - by Howard Lee Harkness
    I need to develop software in C/C++ for an embedded system. I have Debian 6 running off of a USB hard drive. I would like to be able to generate a stripped-down kernel with modules, and install them either on a CF card or a USB 'thumb' drive. I succeeded in building a Linux 3.6 kernel and running it in Debian off of the USB hard drive, but I am having trouble figuring out how to install it on the thumb drive. I would like a build cycle that looks like this: 1) Build module or kernel with desired software 2) Install it on thumb drive 3) Boot and test I would like to use the same system for both development and testing, if that is feasible. I am looking for resources and tutorials that would help me understand how to do this.

    Read the article

  • Retrieving a specific value from "df -h" using shell

    - by Diego Dias
    When I use df -h, I get the following output: Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 59G 2.2G 54G 4% / /dev/sda1 122M 38M 78M 33% /boot tmpfs 1.1G 0 1.1G 0% /dev/shm 10.10.0.105:/somepath 11T 8.4T 2.1T 81% /storage4 10.11.0.101:/somepath 15T 8.9T 5.9T 61% /storage1 /dev/mapper/patha 5.0T 255G 4.8T 5% /storage5_vol0 /dev/mapper/pathb 5.0T 195G 4.9T 4% /storage5_vol1 /dev/mapper/pathc 5.0T 608G 4.5T 12% /storage5_vol2 I want to write a script that gets the value of Avail column on a specific storage. I used to use df -k /storage_name | tail -1 | awk '{print $3}' But the FileSystem column can have a value or not .. which would change the variable of my script from $3 to $4. How can I get the Avail on a single command line even if there are no values on the previous columns?

    Read the article

  • How to execute a script while booting Linux from flashdrive?

    - by Usman Ajmal
    I know i can make my script run at boot time in runlevel 2 by putting it in /etc/init.d/ and creating a symbolic to it in /etc/rc2.d but thats when Linux is on hard drive. I want to run my script from a flashdrive such that when a user plug in a flashdrive and powers ON the machine, it may start booting from the OS in flash drive and eventually executing my script. How can I achieve such a functionality? I have tried burning OS to flashdrive but I never succeeded in booting OS from flashdrive.

    Read the article

  • Function key emulator for Dell inspiron 6400 on external keyboard

    - by hardik988
    I have a 3 year old Dell inspiron 6400 with windows 7 and ubuntu 9.10 dual boot. I messed up my Laptop keyboard and hence my Fn key is not working and I need it to activate the wireless whose activation combination is Fn+F2. Is there any way I can emulate the Fn key or get my wireless to start in windows or ubuntu ? My bios has an option for Fn key emulation but that only supports external PS/2 keyboards and my laptop doesn't have a ps/2 slot. Any ideas would be appreciated ..

    Read the article

  • Not able to connect to internet in RHEL 5

    - by chankey007
    I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

    Read the article

  • Not able to connect to internet in RHEL 5

    - by chankey007
    I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

    Read the article

  • ubuntu fails to start

    - by miccaman
    I have a laptop with ubuntu 9.10 which fails to start, and I want to copy the data from it to an external hard disk. I can login in recovery mode command line, but then I cannot mount the external hard drive. (in recovery mode I cannot write to the laptops hard drive) If I boot from an portable USB with mintlinux, I can mount the external harddrive, and copy most of the data from the laptop, however there is a dir which I have no rights to access under /home/user/Documents then I get a permission denied error. Are there any other options?

    Read the article

  • Windows XP - Repairing Corrupt System32\Config\System File

    - by SimonTewsi
    My apologies for this long post. I would like to describe the mess I'm in then ask some questions about how to fix it: Starting up my Windows XP SP1 machine I got the following message: Windows could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM Tried restarting several times with same results then Googled the problem. Tried the fix described here: http://icrontic.com/articles/repair%5Fwindows%5Fxp (since my CPU does not have XD buffer overflow protection I did not set /NOEXECUTE=OPTIN as OS Load Option). This did not work. I then found another fix for the problem on hardwareanalysis.com: Basically, boot to dos prompt (or recovery console if available) and make backups of the following files:- c:\windows\system32\config\system (to c:\windows\tmp\system.bak) c:\windows\system32\config\software (to c:\windows\tmp\software.bak) c:\windows\system32\config\sam (to c:\windows\tmp\sam.bak) c:\windows\system32\config\security (to c:\windows\tmp\security.bak) c:\windows\system32\config\default (to c:\windows\tmp\default.bak) then delete the above files (not the backups!) then copy the above files in c:\windows\repair to the c:\windows\system32\config directory restart your computer This did work (and I wish I'd done it first, since it was completely reversible, unlike the first method). However, afterwards I found that all the user accounts on the PC were gone. I resurrected them by copying the backed up security file back into the system32\config folder (I may have copied the SAM file from backup as well, I cannot remember clearly now). Now the PC boots up and I can log in. However things are still not right. I tried to alter one of the user accounts and found I could not access the User Accounts in the Control Panel. Microsoft KB 919292 had a fix for the problem. However, the fix failed with a Windows Installer error: The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if Windows Installer is not correctly installed. Contact your support personnel for assistance. Windows Installer 3.1 was already installed. I reinstalled it but continued to get the Windows Installer error whenever I tried to run the fix in KB 919292. I have since noticed another three problems: 1) Several applications on the PC no longer run, eg Microsoft Word. Shortcuts no longer seem to do anything and if I run the executables directly (eg for Word by running C:\Program Files\Microsoft Office\Office10\Winword.exe) I get a message similar to: "Microsoft Word has not been installed for the current user. Please run setup to install the application." even though the executable is clearly visible in Windows Explorer (and even though Word actually opens - the error dialog appears after Word has opened. Clicking OK to the error dialog closes Word). 2) One or the other of the two fixes I tried for the original problem caused new user profiles to be created. eg My old user profile under the Documents and Settings folder was Simon. The old one still exists but there is now a new one called Simon.DBQ2515. Obviously the new one is being used because Opera (my browser that still works) no longer sees the bookmarks file under my old profile. 3) Probably as a result of fooling around with the Security file, when I try to boot off the Windows XP CD and run the Recovery Console I am now asked for the administrator password. The only problem is there is no administrator account on the PC. There is one account, LocalAdmin, that has administrative rights but when I entered the password for that account it did not work. It is so long since I originally set up the PC that I cannot remember if the original administrator account ever had a password and, if so, what it was. So, my question is: How can I fix this mess? In particular: 1) Having tried the two fixes linked to above, have I irrepairably damaged the Windows instance, requiring a clean reinstallation of Windows + all applications, or should it be possible to get the machine working correctly again without such drastic measures? 2) Is there any way to get around the administrator password so I can use the Recovery Console again, given that there is no account called "administrator" and the password for the one account with admin privileges does not work (and that, before I started the second fix, I was not asked for an administrator password)? 3) Is there any easy way to fix the problem with the applications that think they are not installed? 4) Is there any easy way to fix the problem of the Windows Installer that does not work, even if reinstalled? Cheers Simon

    Read the article

  • Clone a 2TB WD Green internal drive with bad sectors to a 3TB partitioned external

    - by ron
    I have a 2TB WD Black drive and would like to simply do a straight clone from a failing 3TB drive to it. Both are SATA. Will I be able to just install the new drive alongside the faulty one and then do the clone/rescue attempt with ddrescue or is there a better method? The faulty internal drive mentioned has bed sectors although am usually able to boot into Windows 7 Ultimate with it and navigate and access all my programs. I have been attempting some trials with an Ubuntu Live CD using ddrescue but am not sure I'm doing it right. I have a 3TB WD my book essential external which is GPT and have created a separate 2TB partition on it which I am trying to clone to. I assume I need to format the new drive first to NTFS? Can I do that via the Ubuntu Rescue Remix 12-04 live DVD that I've been booting with?

    Read the article

  • Repair Lacie 2Big Network 2

    - by Donier
    hi i buy from you Lacie 2big network 2 I was have problem with drive 2 "missed" then i try format HDD to mac os journal end RAW Now i can't connect to the device from network asistant please hep me I can't connect to Doshboard and i can't connect from USB on Lacie 2 big network 2device. I can connect to HDD from Lacie 2big network 2. how create lacie doshbaoard boot on HDD device. i format disks because one of HDD is work not correctly... in the Dashboard RAID menu disk 2 missed.... Thank you i wiil wait your answer....

    Read the article

  • Connecting to a computer using Remote Desktop does not work first time

    - by dev
    Hi all, I'm having a weird sort of problem with Remote desktop and that too, only on one machine. If I boot up this machine, and then try to Remote desktop into it, it does not work.( I get the following error: The client could not connect to the remote computer. Remote connections might not be enabled or the computer might be too busy to accept new connections. It is also possible that network problems are preventing your connection. Please try connecting again later. If the problem continues to occur, contact your administrator. ) But if I physically log into it & then log out, and then try to Remote desktop into it, it works flawlessly. The problematic machine is Xp 64 Bit, but other systems with Xp 64 Bit work fine. Any Ideas on how to solve this?

    Read the article

  • How to redirect third party logs to log server in Centos

    - by chandank
    I want to setup a simple log server to accept logs from all clients. I am not talking about standard system logs such as /var/log/mail , message, boot etc. I want to redirect or send application logs and they may not be using syslog daemon at all to log their message. Such as /appdir/log/error.log. I ran across many posts on the internet; most suggest using rsyslog or syslog-ng. Well so far I have been able to redirect the standard system logs not the application logs. I am using centos 5/6 environment.

    Read the article

  • What disk setup is needed / best practice for hypervisor-only servers?

    - by Luke404
    Planning to buy some servers to run an hypervisor (Citrix XenServer or VMware vSphere, still have to decide between the two) we'd like to boot off the local redundant SD card module offered by various vendors (eg. Dell, HP, etc...). The actual VMs will run from an existing iSCSI SAN (which, by the way, can't support booting the servers directly off the SAN). What are the reasons, if any, to choose completely diskless servers VS having some local storage? And what would be the guidelines to choose that local storage? (number of spindles, raid level, etc)

    Read the article

  • centos 100% disk full - How to remove log files, history, etc?

    - by kopeklan
    mysqld won't start because disk space is full: 101221 14:06:50 [ERROR] /usr/libexec/mysqld: Error writing file '/var/run/mysqld/mysqld.pid' (Errcode: 28) 101221 14:06:50 [ERROR] Can't start server: can't create PID file: No space left on device running df -h: Filesystem Size Used Avail Use% Mounted on /dev/sda2 16G 3.2G 12G 23% / /dev/sda5 4.8G 4.6G 0 100% /var /dev/sda3 430G 855M 407G 1% /home /dev/sda1 76M 24M 49M 33% /boot tmpfs 956M 0 956M 0% /dev/shm du -sh * in /var: 12K account 56M cache 24K db 32K empty 8.0K games 1.5G lib 8.0K local 32K lock 221M log 16K lost+found 0 mail 24K named 8.0K nis 8.0K opt 8.0K preserve 8.0K racoon 292K run 70M spool 8.0K tmp 76K webmin 2.6G www 20K yp in /dev/sda5, there is website files in /var/www. because this is first time, I have no idea which files to remove other than moving /var/www to other partition And one more, what is the right way to remove log files, history, etc in /dev/sda5?

    Read the article

  • ARP replies contain wrong MAC address

    - by Jayen
    I've got a robot running linux with wired and wireless adapters. When I boot up, it connects to the wireless fine. When I assign an IP to the wired (either statically or with DHCP), it looks like it works. As in, ifconfig shows a proper IP and route shows proper routes. However, when I do an ARP request of the wired IP, the ARP reply contains the wireless MAC. ??? There's no bridge running on the robot, so why don't I get the wired MAC??? When the wire is disconnected, the wired IP replies to ping... Why is the robot replying over the wireless interface to IP requests on the wired???

    Read the article

  • mount fstab partition with public access

    - by Mikhail
    How do I specify that an fstab mount-point should be public? I want /mnt/windows to be accessible to normal users. I believe I am using ntfs-3g. If I set the /mnt/windows to 777 will it be publicly accessible without changing the permissions on the NTFS disk? /dev/sdb4 /mnt/windows ntfs noatime 0 1 /dev/sdb5 / ext4 noatime 0 1 UUID=5AA4-168D /boot/efi vfat defaults 0 1 and localhost my_computer # stat /mnt/windows/ File: '/mnt/windows/' Size: 12288 Blocks: 24 IO Block: 512 directory Device: 814h/2068d Inode: 5 Links: 1 Access: (0700/drwx------) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2014-08-21 18:29:13.597722200 -0500 Modify: 2014-08-21 18:29:13.597722200 -0500 Change: 2014-08-21 18:29:13.597722200 -0500 Birth: -

    Read the article

  • mounting vsphere 4.0 file system in ubuntu linux

    - by sravan
    hi all, I am using VSpere 4.0 for my project work. I needed 4-5 servers my project work which is based on Database. I felt the virtualisation is very good to get the 5 servers running good at the same time. It was running good until few days back. Yesterday, it suddenly crashed and i had no idea of the reason.Today, it did not even boot up. Now, i need to take the data backup from that system. In order to do the same, i got the hard drive from the machine and tried to mount it on local linux machine.But, i was not successful. The disk was not even recognized by the linux machine. Can some one please tell me how to mount it and get the required data? Thank you all

    Read the article

  • User reduced LVM logical volume without resizing filesystem

    - by Matthew
    I received an email yesterday that one of our users was trying to make room for a heartbeat/clustering package which requires its own partition to act as a voting disk. To do this, he attempted to reduce the size of the root partition's logical volume, and then create a new logical volume for this purpose. However, he forgot to resize the filesystem first (or include the -r switch in the command). He also forgot to unmount the root partition by running this process from a rescue cd. The system is now refusing to boot into the OS with the following error: Either the superblock or the partition table is likely to be corrupt! Unexpected Inconsistency; run fsck manually. The system them drops the user into single user mode. Is it possible to rescue the filesystem, or is it hosed? Its running ext3.

    Read the article

  • "Fuzzy" Display Problems on New OpenSUSE 11.3 Install

    - by Kryten
    Hi, I have a old Desktop that has a new installation of OpenSUSE 11.3 on it. To get straight to the point, whenever I try to start-up OpenSUSE, my display goes "fuzzy" (almost like a badly tuned TV) and sometimes (not always) my monitor goes black and says "Out of Range: 15.6kHz/49Hz": I assumed that this was a driver problem, so I download the drivers from nvidia and ran the shell script, completed and rebooted. Then OpenSUSE failed to boot with something like "nscd failed to start". At that point I decided to re-install and I did, but this time I tried un-checking "Automatic Configuration" to see if that helped. Got through the install and still have a problem. Unfortunately, my Linux troubleshooting skills are non-existent, so has anyone got any ideas on what could be the problem (is it the display driver?) and how I can fix the problem?

    Read the article

< Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274  | Next Page >