selected - Page 267 - Developer IT

Updates broke my themes/shell [Ubuntu 12.04 running Gnome 3 ]

- by APNW

I am running gnome-session 3.4.2.1. After the latest updates (listed below) my theme regressed to what looks like tango - not sure. Am unable to change it using Gnome-tweak tool or the display settings. I am also unable to change the wallpaper. Here's what it looks like: Synaptic: Chromium and this is the wallpaper page even though I have selected the wallpaper, it actually does not change. This same problem occurred on my personal computer, and one other computer I have, all running the same software/config. The interesting thing is that while Gnome 3 and Unity are affected, Cinnamon is not. What I've done so far: purged and re-installed both gnome 3 and Unity- no change noted. So, how do I fix this? Thanks Here's the installation log: Start-Date: 2013-11-07 12:01:28 Upgrade: chromium-browser-l10n:i386 (28.0.1500.71-0ubuntu1.12.04.1, 30.0.1599.114-0ubuntu0.12.04.3), libswscale2:i386 (0.8.6-0ubuntu0.12.04.1, 0.8.8-0ubuntu0.12.04.1), chromium-codecs-ffmpeg:i386 (28.0.1500.71-0ubuntu1.12.04.1, 30.0.1599.114-0ubuntu0.12.04.3), chromium-browser:i386 (28.0.1500.71-0ubuntu1.12.04.1, 30.0.1599.114-0ubuntu0.12.04.3), libpostproc52:i386 (0.8.6-0ubuntu0.12.04.1, 0.8.8-0ubuntu0.12.04.1), libavcodec-extra-53:i386 (0.8.6ubuntu0.12.04.1, 0.8.8ubuntu0.12.04.1), libavformat53:i386 (0.8.6-0ubuntu0.12.04.1, 0.8.8-0ubuntu0.12.04.1), libavutil-extra-51:i386 (0.8.6ubuntu0.12.04.1, 0.8.8ubuntu0.12.04.1) End-Date: 2013-11-07 12:02:00 Start-Date: 2013-11-07 17:32:55 Commandline: aptdaemon role='role-commit-packages' sender=':1.136' Install: libmusicbrainz5-0:i386 (5.0.1-2~precise2), udisks2:i386 (1.98.0-1~precise1), libclutter-gst-1.0-0:i386 (1.5.4-0ubuntu2), libudisks2-0:i386 (1.98.0-1~precise1), cinnamon-session-common:i386 (2.0.4-20131105043005-precise), librhythmbox-core6:i386 (2.97-1ubuntu1~precise1), gcr:i386 (3.4.1-3~precise1), libcluttergesture-0.0.2-0:i386 (0.0.2.1-2ubuntu3), libmx-1.0-2:i386 (1.4.3-0ubuntu1), guile-2.0-libs:i386 (2.0.5+1-1), libclutter-imcontext-0.1-0:i386 (0.1.4-2build1), libnatpmp1:i386 (20110808-3ubuntu1) Upgrade: gnome-keyring:i386 (3.2.2-2ubuntu4.1, 3.4.1-4ubuntu1~precise1), cinnamon:i386 (2.0.6-20131026040307-precise, 2.0.10-20131105040309-precise), gir1.2-muffin-3.0:i386 (2.0.3-20131023003029-precise, 2.0.3-20131105003012-precise), gir1.2-totem-1.0:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), nemo:i386 (2.0.2-20131023010018-precise, 2.0.5-20131105010007-precise), aisleriot:i386 (3.2.3.2-0ubuntu1, 3.4.1-1~precise1), procps:i386 (3.2.8-11ubuntu6.2, 3.2.8-11ubuntu6.3), libcinnamon-desktop0:i386 (2.0.2-20131025011504-precise, 2.0.3-20131105011505-precise), libgck-1-0:i386 (3.2.2-2ubuntu4.1, 3.4.1-3~precise1), totem-plugins:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), cinnamon-desktop-data:i386 (2.0.2-20131025011504-precise, 2.0.3-20131105011505-precise), rhythmbox:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), libgcr-3-1:i386 (3.2.2-2ubuntu4.1, 3.4.1-3~precise1), seahorse:i386 (3.2.2-0ubuntu2.1, 3.4.1-2~precise1), muffin-common:i386 (2.0.3-20131023003029-precise, 2.0.3-20131105003012-precise), totem-common:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), libtotem0:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), rhythmbox-data:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), gir1.2-cinnamondesktop-3.0:i386 (2.0.2-20131025011504-precise, 2.0.3-20131105011505-precise), cinnamon-session:i386 (2.0.1-20131021043004-precise, 2.0.4-20131105043005-precise), rhythmbox-mozilla:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), rhythmbox-plugin-zeitgeist:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), libmuffin0:i386 (2.0.3-20131023003029-precise, 2.0.3-20131105003012-precise), cjs:i386 (2.0.0-20131021020602-precise, 2.0.0-20131105020703-precise), rhythmbox-plugin-cdrecorder:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), cinnamon-common:i386 (2.0.6-20131026040307-precise, 2.0.10-20131105040309-precise), gnome-disk-utility:i386 (3.0.2-2ubuntu7, 3.4.1-0ubuntu1~precise1), nemo-fileroller:i386 (2.0.0-20131021020004-precise, 2.0.0-20131105020003-precise), libnemo-extension1:i386 (2.0.2-20131023010018-precise, 2.0.5-20131105010007-precise), rhythmbox-plugins:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), gimp:i386 (2.8.6-0precise1~ppa, 2.8.8-0precise0~ppa), cinnamon-settings-daemon:i386 (2.0.5-20131026004504-precise, 2.0.6-20131105004505-precise), libgimp2.0:i386 (2.8.6-0precise1~ppa, 2.8.8-0precise0~ppa), gir1.2-rb-3.0:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), wpasupplicant:i386 (0.7.3-6ubuntu2.1, 0.7.3-6ubuntu2.2), libcjs0c:i386 (2.0.0-20131021020602-precise, 2.0.0-20131105020703-precise), nemo-data:i386 (2.0.2-20131023010018-precise, 2.0.5-20131105010007-precise), totem:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), gimp-data:i386 (2.8.6-0precise1~ppa, 2.8.8-0precise0~ppa), transmission-common:i386 (2.51-0ubuntu1.3, 2.73-0ubuntu1~precise1), cinnamon-translations:i386 (2.0.1-20131021040407-precise, 2.0.1-20131105040807-precise), totem-mozilla:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), rhythmbox-plugin-magnatune:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), transmission-gtk:i386 (2.51-0ubuntu1.3, 2.73-0ubuntu1~precise1) End-Date: 2013-11-07 17:34:40

Read the article

#OOW 2012 @PARIS...talking Oracle and Clouds, and Optimized Datacenter

- by Eric Bezille

For those of you who want to get most out of Oracle technologies to evolve your IT to the Next Wave, I encourage you to register to the up coming Oracle Optimized Datacenter event that will take place in Paris on November 28th. You will get the opportunity to exchange with Oracle experts and customers having successfully evolve their IT by leveraging Oracle technologies. You will also get the latest news on some of the Oracle systems announcements made during OOW 2012. During this event we will make an update about Oracle and Clouds, from private to public and hybrid models. So in preparing this session, I thought it was a good start to make a status of Cloud Computing in France, and CIO requirements in particular. Starting in 2009 with the first Cloud Camp in Paris, the market has evolved, but the basics are still the same : think hybrid. From Traditional IT to Clouds One size doesn't fit all, and for big companies having already an IT in place, there will be parts eligible to external (public) cloud, and parts that would be required to stay inside the firewalls, so ability to integrate both side is key. None the less, one of the major impact of Cloud Computing trend on IT, reported by Forrester, is the pressure it makes on CIO to evolve towards the same model that end-users are now used to in their day to day life, where self-service and flexibility are paramount. This is what is driving IT to transform itself toward "a Global Service Provider", or for some as "IT "is" the Business" (see : Gartner Identifies Four Futures for IT and CIO), and for both models toward a Private Cloud Service Provider. In this journey, there is still a big difference between most of existing external Cloud and a firm IT : the number of applications that a CIO has to manage. Most cloud providers today are overly specialized, but at the end of the day, there are really few business processes that rely on only one application. So CIOs has to combine everything together external and internal. And for the internal parts that they will have to make them evolve to a Private Cloud, the scope can be very large. This will often require CIOs to evolve from their traditional approach to more disruptive ones, the time has come to introduce new standards and processes, if they want to succeed. So let's have a look at the different Cloud models, what type of users they are addressing, what value they bring and most importantly what needs to be done by the Cloud Provider, and what is left over to the user. IaaS, PaaS, SaaS : what's provided and what needs to be done First of all the Cloud Provider will have to provide all the infrastructure needed to deliver the service. And the more value IT will want to provide, the more IT will have to deliver and integrate : from disks to applications. As we can see in the above picture, providing pure IaaS, left a lot to cover for the end-user, that’s why the end-user targeted by this Cloud Service is IT people. If you want to bring more value to developers, you need to provide to them a development platform ready to use, which is what PaaS is standing for, by providing not only the processors power, storage and OS, but also the Database and Middleware platform. SaaS being the last mile of the Cloud, providing an application ready to use by business users, the remaining part for the end-users being configuring and specifying the application for their specific usage. In addition to that, there are common challenges encompassing all type of Cloud Services : Security : covering all aspect, not only of users management but also data flows and data privacy Charge back : measuring what is used and by whom Application management : providing capabilities not only to deploy, but also to upgrade, from OS for IaaS, Database, and Middleware for PaaS, to a full Business Application for SaaS. Scalability : ability to evolve ALL the components of the Cloud Provider stack as needed Availability : ability to cover “always on” requirements Efficiency : providing a infrastructure that leverage shared resources in an efficient way and still comply to SLA (performances, availability, scalability, and ability to evolve) Automation : providing the orchestration of ALL the components in all service life-cycle (deployment, growth & shrink (elasticity), upgrades,...) Management : providing monitoring, configuring and self-service up to the end-users Oracle Strategy and Clouds For CIOs to succeed in their Private Cloud implementation, means that they encompass all those aspects for each component life-cycle that they selected to build their Cloud. That’s where a multi-vendors layered approach comes short in terms of efficiency. That’s the reason why Oracle focus on taking care of all those aspects directly at Engineering level, to truly provide efficient Cloud Services solutions for IaaS, PaaS and SaaS. We are going as far as embedding software functions in hardware (storage, processor level,...) to ensure the best SLA with the highest efficiency. The beauty of it, as we rely on standards, is that the Oracle components that you are running today in-house, are exactly the same that we are using to build Clouds, bringing you flexibility, reversibility and fast path to adoption. With Oracle Engineered Systems (Exadata, Exalogic & SPARC SuperCluster, more specifically, when talking about Cloud), we are delivering all those components hardware and software already engineered together at Oracle factory, with a single pane of glace for the management of ALL the components through Oracle Enterprise Manager, and with high-availability, scalability and ability to evolve by design. To give you a feeling of what does that bring in terms just of implementation project timeline, for example with Oracle SPARC SuperCluster, we have a consistent track of record to have the system plug into existing Datacenter and ready in a week. This includes Oracle Database, OS, virtualization, Database Storage (Exadata Storage Cells in this case), Application Storage, and all network configuration. This strategy enable CIOs to very quickly build Cloud Services, taking out not only the complexity of integrating everything together but also taking out the automation and evolution complexity and cost. I invite you to discuss all those aspect in regards of your particular context face2face on November 28th.

Read the article

From Pocket to Instapaper

- by Michael Freidgeim

Some time ago I’ve described the issues that I’ve had since a new version of Read It Later, named Pocket, was introduced.I’ve waited with hope for a new upgrade, but I had a huge disappointment with the latest version 16 June 2012. It didn’t fixed any of the two major problems, that I experienced since new Pocket was introduced- 1. iPad app still didn’t show many of the saved links. 2. ability to rename articles on iPad still wasn’t restored.I’ve posted the message into their forum. They did not show my comment on their forum( I would name it censorship, not moderation), but a few days ago I’ve received an email, recommending “try logging out of the app on your iPad, and back in again.” Their suggestion helped, but I don’t understand, why it is not posted as a recommendation on their support site.So I decided to try InstAPaper on my iPad, Previously I’ve used it for Kindle. I never considered it before on iPad, because there were no free demo and I was very satisfied with RIL free and then RIL Pro. Currently InstAPaper cost $3, so the price is not an issue.I’ve checked that it has most of features that I am using(e.g. renaming, folders) and I am quite happy with it now. Actually I am using Pocket (or RIL free) for old bookmarks( I have 1000+ stored on my iPad) and for new bookmarks I am using InstAPaper.Having a solid experience with RIL/Pocket I’ve created a list of suggestions to Marco Arment to implement.1. Some pages stored in InstAPaper have removed essential sections of the text. E.g in many blogs comments are not stored in InstAPaper. Some pages lost almost all of important links (e.g. http://www.lib.rus.ec/a/32416 -sorry, in Russian). RIL/Pocket has 2 modes to store offline- Web view and Article view. Web View includes all links/images of the original page, but it’s very reliable. Article view suppose to strip unrelated information, but often corrupts the content. I prefer to use offline Web view.InstAPaper should also support offline Web view, in case if stripped view removes important part of content.2. Black full screen Saving on iPad Safari is very annoying. After user pressed a bookmark, the saving has some delay and then for a few seconds prevents from reading the text.Would be better to show as message on the top part(as in Pocket ). I am surprised, that a full screen popup was implemented recently as a desired feature. 3.There are no comments allowed on http://blog.instapaper.com/. I would prefer to post some of these notes as comments on http://blog.instapaper.com/ rather than write them in my blog and then send link to Marco.(I found recommendation how to add support of comments on tumblr at http://www.tumblr.com/help, but then realized that Marko was the lead developer ofTumblr.)4. Also there is no support forum. I understand that maintenance of the forum ican be a hassle, but stackexchange fSome time ago I’ve described the issues that I’ve had since a new version of Read It Later, named Pocket, was introduced.I’ve waited with hope for a new upgrade, but I had a huge disappointment with the latest version 16 June 2012. It didn’t fixed any of the two major problems, that I experienced since new Pocket was introduced- orums can be referred on http://www.instapaper.com/main/support page, i.e.http://webapps.stackexchange.com/search?q=Instapaper or http://apple.stackexchange.com/search?q=Instapaper 5. Tags are more convenient than folders. i.e. an ability for the same article to have more than one tag. Also creating of new folders is not supported offline, which is an annoying limitation.6. I would like to have a narrow list - additionally to existing list modes have a subject only list or subject+site list to show more list items on a screen.7. Limit of 500 offline articles sounds quite big, but my RIL list exceeded 1000, so it could be a issue in the future.8. Search button on iPad version is visible, but doesn’t work- it forces to buy Premium subscription. I think, that it’s not correct. If the button in a paid version is visible and enabled, it should provide a working functionality, e.g. search in article names only. And leave full-text search for the premium support.9..Copy URL is an important operation and deserves to be in a first level of Action menu, rather than in Share sub-menu.I’ve also have comment re post http://www.marco.org/2011/04/28/removed-instapaper-free. Marco Arment explained, why he doesn’t provide free version of Instapaper. I believe that he is loosing essential part of his customers. When I decided which of iPad application to choose, I’ve selected RIL, because I was able to play with free version, and I liked it. I didn’t have a chance to compare RIL and InstAPaper on iPad, so I’ve bought RIL pro. For a user there is no point to pay even $3 , if there are similar free product, that user can try and see, is it suitable for him/her.I’ve also played with Readability. It doesn’t have folders or tags(which is very important for me), but nicely supports full text search

Read the article

Atheros 922 PCI WIFI is disabled in Unity but enabled in terminal - How to get it to work?

- by zewone

I am trying to get my PCI Wireless Atheros 922 card to work. It is disabled in Unity: both the network utility and the desktop (see screenshot http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) I tried many different advises on many different forums. Installed 12.10 instead of 12.04, enabled all interfaces... etc. I have read about the aht9 driver... The terminal shows no hw or sw lock for the Atheros card, nevertheless, it is still disabled. Nothing worked so far, the card is still disabled. Any help is much appreciated. Here are more tech details: myuser@adri1:~$ sudo lshw -C network *-network:0 DISABLED description: Wireless interface product: AR922X Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 2 bus info: pci@0000:03:02.0 logical name: wlan1 version: 01 serial: 00:18:e7:cd:68:b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-17-generic firmware=N/A latency=168 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:d8000000-d800ffff *-network:1 description: Ethernet interface product: VT6105/VT6106S [Rhine-III] vendor: VIA Technologies, Inc. physical id: 6 bus info: pci@0000:03:06.0 logical name: eth0 version: 8b serial: 00:11:09:a3:76:4a size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.5.0 duplex=half latency=32 link=no maxlatency=8 mingnt=3 multicast=yes port=MII speed=10Mbit/s resources: irq:18 ioport:d300(size=256) memory:d8013000-d80130ff *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:8.1 logical name: wlan0 serial: 00:11:09:51:75:36 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=3.5.0-17-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg myuser@adri1:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy1: Wireless LAN Soft blocked: no Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no myuser@adri1:~$ dmesg | grep wlan0 [ 15.114235] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready myuser@adri1:~$ dmesg | egrep 'ath|firm' [ 14.617562] ath: EEPROM regdomain: 0x30 [ 14.617568] ath: EEPROM indicates we should expect a direct regpair map [ 14.617572] ath: Country alpha2 being used: AM [ 14.617575] ath: Regpair used: 0x30 [ 14.637778] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control' [ 14.639410] Registered led device: ath9k-phy0 myuser@adri1:~$ dmesg | grep wlan1 [ 15.119922] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready myuser@adri1:~$ lspci -nn | grep 'Atheros' 03:02.0 Network controller [0280]: Atheros Communications Inc. AR922X Wireless Network Adapter [168c:0029] (rev 01) myuser@adri1:~$ sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:11:09:a3:76:4a inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fea3:764a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5457 errors:0 dropped:0 overruns:0 frame:0 TX packets:2548 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3425684 (3.4 MB) TX bytes:282192 (282.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:590 errors:0 dropped:0 overruns:0 frame:0 TX packets:590 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:53729 (53.7 KB) TX bytes:53729 (53.7 KB) myuser@adri1:~$ sudo iwconfig wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on lo no wireless extensions. eth0 no wireless extensions. wlan1 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off myuser@adri1:~$ lsmod | grep "ath9k" ath9k 116549 0 mac80211 461161 3 rt2x00usb,rt2x00lib,ath9k ath9k_common 13783 1 ath9k ath9k_hw 376155 2 ath9k,ath9k_common ath 19187 3 ath9k,ath9k_common,ath9k_hw cfg80211 175375 4 rt2x00lib,ath9k,mac80211,ath myuser@adri1:~$ iwlist scan wlan0 Failed to read scan data : Network is down lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan1 Failed to read scan data : Network is down myuser@adri1:~$ lsb_release -d Description: Ubuntu 12.10 myuser@adri1:~$ uname -mr 3.5.0-17-generic i686 ![Schizophrenic Ubuntu](http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) Any help much appreciated... Thanks, Philippe 31-10-2012 ... I have some more updates. When I do the following command it does see my Wifi router... So even if it is still disabled... the card seems to work and see the router (ESSID:"5791BC26-CE9C-11D1-97BF-0000F81E") See below: sudo iwlist wlan1 scanning wlan1 Scan completed : Cell 01 - Address: 00:19:70:8F:B0:EA Channel:10 Frequency:2.457 GHz (Channel 10) Quality=51/70 Signal level=-59 dBm Encryption key:on ESSID:"5791BC26-CE9C-11D1-97BF-0000F81E" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000025dbf2188 Extra: Last beacon: 108ms ago IE: Unknown: 002035373931424332362D434539432D313144312D393742462D3030303046383145 IE: Unknown: 010882848B960C121824 IE: Unknown: 03010A IE: Unknown: 0706424520010D14 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101030003A4000027A4000042435E0062322F00 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000

Read the article

Add Widget via Action in Toolbar

- by Geertjan

The question of the day comes from Vadim, who asks on the NetBeans Platform mailing list: "Looking for example showing how to add Widget to Scene, e.g. by toolbar button click." Well, the solution is very similar to this blog entry, where you see a solution provided by Jesse Glick for VisiTrend in Boston: https://blogs.oracle.com/geertjan/entry/zoom_capability Other relevant articles to read are as follows: http://netbeans.dzone.com/news/which-netbeans-platform-action http://netbeans.dzone.com/how-to-make-context-sensitive-actions Let's go through it step by step, with this result in the end, a solution involving 4 classes split (optionally, since a central feature of the NetBeans Platform is modularity) across multiple modules: The Customer object has a "name" String and the Droppable capability has a method "doDrop" which takes a Customer object: public interface Droppable { void doDrop(Customer c);} In the TopComponent, we use "TopComponent.associateLookup" to publish an instance of "Droppable", which creates a new LabelWidget and adds it to the Scene in the TopComponent. Here's the TopComponent constructor: public CustomerCanvasTopComponent() { initComponents(); setName(Bundle.CTL_CustomerCanvasTopComponent()); setToolTipText(Bundle.HINT_CustomerCanvasTopComponent()); final Scene scene = new Scene(); final LayerWidget layerWidget = new LayerWidget(scene); Droppable d = new Droppable(){ @Override public void doDrop(Customer c) { LabelWidget customerWidget = new LabelWidget(scene, c.getTitle()); customerWidget.getActions().addAction(ActionFactory.createMoveAction()); layerWidget.addChild(customerWidget); scene.validate(); } }; scene.addChild(layerWidget); jScrollPane1.setViewportView(scene.createView()); associateLookup(Lookups.singleton(d));} The Action is displayed in the toolbar and is enabled only if a Droppable is currently in the Lookup: @ActionID( category = "Tools", id = "org.customer.controler.AddCustomerAction")@ActionRegistration( iconBase = "org/customer/controler/icon.png", displayName = "#AddCustomerAction")@ActionReferences({ @ActionReference(path = "Toolbars/File", position = 300)})@NbBundle.Messages("AddCustomerAction=Add Customer")public final class AddCustomerAction implements ActionListener { private final Droppable context; public AddCustomerAction(Droppable droppable) { this.context = droppable; } @Override public void actionPerformed(ActionEvent ev) { NotifyDescriptor.InputLine inputLine = new NotifyDescriptor.InputLine("Name:", "Data Entry"); Object result = DialogDisplayer.getDefault().notify(inputLine); if (result == NotifyDescriptor.OK_OPTION) { Customer customer = new Customer(inputLine.getInputText()); context.doDrop(customer); } }} Therefore, when the Properties window, for example, is selected, the Action will be disabled. (See the Zoomable example referred to in the link above for another example of this.) As you can see above, when the Action is invoked, a Droppable must be available (otherwise the Action would not have been enabled). The Droppable is obtained in the Action and a new Customer object is passed to its "doDrop" method. The above in pictures, take note of the enablement of the toolbar button with the red dot, on the extreme left of the toolbar in the screenshots below: The above shows the JButton is only enabled if the relevant TopComponent is active and, when the Action is invoked, the user can enter a name, after which a new LabelWidget is created in the Scene. The source code of the above is here: http://java.net/projects/nb-api-samples/sources/api-samples/show/versions/7.3/misc/WidgetCreationFromAction Note: Showing this as an MVC example is slightly misleading because, depending on which model object ("Customer" and "Droppable") you're looking at, the V and the C are different. From the point of view of "Customer", the TopComponent is the View, while the Action is the Controler, since it determines when the M is displayed. However, from the point of view of "Droppable", the TopComponent is the Controler, since it determines when the Action, i.e., which is in this case the View, displays the presence of the M.

Read the article

Think before you animate

- by David Paquette

Animations are becoming more and more common in our applications. With technologies like WPF, Silverlight and jQuery, animations are becoming easier for developers to use (and abuse). When used properly, animation can augment the user experience. When used improperly, animation can degrade the user experience. Sometimes, the differences can be very subtle. I have recently made use of animations in a few projects and I very quickly realized how easy it is to abuse animation techniques. Here are a few things I have learned along the way. 1) Don’t animate for the sake of animating We’ve all seen the PowerPoint slides with annoying slide transitions that animate 20 different ways. It’s distracting and tacky. The same holds true for your application. While animations are fun and becoming easy to implement, resist the urge to use the technology just because you think the technology is amazing. 2) Animations should (and do) have meaning I recently built a simple Windows Phone 7 (WP7) application, Steeped (download it here). The application has 2 pages. The first page lists a number of tea types. When the user taps on one of the tea types, the application navigates to the second page with information about that tea type and some options for the user to choose from. One of the last things I did before submitting Steeped to the marketplace was add a page transition between the 2 pages. I choose the Slide / Fade Out transition. When the user selects a tea type, the main page slides to the left and fades out. At the same time, the details page slides in from the right and fades in. I tested it and thought it looked great so I submitted the app. A few days later, I asked a friend to try the app. He selected a tea type, and I was a little surprised by how he used the app. When he wanted to navigate back to the main page, instead of pressing the back button on the phone, he tried to use a swiping gesture. Of course, the swiping gesture did nothing because I had not implemented that feature. After thinking about it for a while, I realized that the page transition I had chosen implied a particular behaviour. As a user, if an action I perform causes an item (in this case the page) to move, then my expectation is that I should be able to move it back. I have since added logic to handle the swipe gesture and I think the app flows much better now. When using animation, it pays to ask yourself: What story does this animation tell my users? 3) Watch the replay Some animations might seem great initially but can get annoying over time. When you use an animation in your application, make sure you try using it over and over again to make sure it doesn’t get annoying. When I add an animation, I try watch it at least 25 times in a row. After watching the animation repeatedly, I can make a more informed decision whether or not I should keep the animation. Often, I end up shortening the length of the animations. 4) Don’t get in the users way An animation should never slow the user down. When implemented properly, an animation can give a perceived bump in performance. A good example of this is a the page transitions in most of the built in apps on WP7. Obviously, these page animations don’t make the phone any faster, but they do provide a more responsive user experience. Why? Because most of the animations begin as soon as the user has performed some action. The destination page might not be fully loaded yet, but the system responded immediately to user action, giving the impression that the system is more responsive. If the user did not see anything happen until after the destination page was fully loaded, the application would feel clumsy and slow. Also, it is important to make sure the animation does not degrade the performance (or perceived performance) of the application. Jut a few things to consider when using animations. As is the case with many technologies, we often learn how to misuse it before we learn how to use it effectively.

Read the article

Existential CAML - does an item exist?

- by PointsToShare

© 2011 By: Dov Trietsch. All rights reserved More CAML and existence. In “SharePoint List Issues” and “Passing the CAML thru the EY of the NEEDL we saw how to use CAML to return a subset of a list and also how to check the existence of lists, fields, defaults, and values. Here is a general function that may be used to get a subset of a list by comparing a “text” type field to a given value. The function is pretty smart. It can be used to check existence or to return a collection of items that may be further processed. It handles non existing fields and replaces them with the ubiquitous “Title”, but only once! /// Build an SPQuery that returns a selected set of columns from a List /// titleField must be a "Text" type field /// When the titleField parameter is empty ("") "Title" is assumed /// When the title parameter is empty ("") All is assumed /// When the columnNames parameter is null, the query returns all the fields /// When the rowLimit parameter is 0, the query return all the items. /// with a non-zero, the query returns at most rowLimits /// /// usage: to check if an item titled "Blah" exists in your list, do: /// colNames = {"Title"} /// col = GetListItemColumnByTitle(myList, "", "Blah", colNames, 1) /// Check the col.Count. if > 0 the item exists and is in the collection private static SPListItemCollection GetListItemColumnByTitle(SPList list, string titleField, string title, string[] columnNames, uint rowLimit) { try { char QT = Convert.ToChar((int)34); SPQuery query = new SPQuery(); if (title != "") { string tf = titleField; if (titleField == "") tf = "Title"; tf = CAMLThisName(list, tf, "Title"); StringBuilder titleQuery = new StringBuilder ("<Where><Eq><FieldRef Name="); titleQuery.Append(QT); titleQuery.Append(tf); titleQuery.Append(QT); titleQuery.Append("/><Value Type="); titleQuery.Append(QT); titleQuery.Append("Text"); titleQuery.Append(QT); titleQuery.Append(">"); titleQuery.Append(title); titleQuery.Append("</Value></Eq></Where>"); query.Query = titleQuery.ToString(); } if (columnNames.Length != 0) { StringBuilder sb = new StringBuilder(""); bool TitleAlreadyIncluded = false; foreach (string columnName in columnNames) { string tst = CAMLThisName(list, columnName, "Title"); //Allow Title only once if (tst != "Title" || !TitleAlreadyIncluded) { sb.Append("<FieldRef Name="); sb.Append(QT); sb.Append(tst); sb.Append(QT); sb.Append("/>"); if (tst == "Title") TitleAlreadyIncluded = true; } } query.ViewFields = sb.ToString(); } if (rowLimit > 0) { query.RowLimit = rowLimit; } SPListItemCollection col = list.GetItems(query); return col; } catch (Exception ex) { //Console.WriteLine("GetListItemColumnByTitle" + ex.ToString()); //sw.WriteLine("GetListItemColumnByTitle" + ex.ToString()); return null; } } Here I called it for a list in which “Author” (it is the internal name for “Created”) and “Blah” do not exist. The list of column names is: string[] columnNames = {"Test Column1", "Title", "Author", "Allow Multiple Ratings", "Blah"}; So if I use this call, I get all the items for which “01-STD MIL_some” has the value of 1. the fields returned are: “Test Column1”, “Title”, and “Allow Multiple Ratings”. Because “Title” was already included and the default for non exixsting is “Title”, it was not replicated for the 2 non-existing fields. SPListItemCollection col = GetListItemColumnByTitle(masterList, "01-STD MIL_some", "1", columnNames, 0); The following call checks if there are any items where “01-STD MIL_some” has the value of “1”. Note that I limited the number of returned items to 1. SPListItemCollection col = GetListItemColumnByTitle(masterList, "01-STD MIL_some", "1", columnNames, 1); The code also uses the CAMLThisName function that checks for an existence of a field and returns its InternalName. This is yet another useful function that I use again and again. /// <summary> /// return a fields internal name (CAMLName) /// or the "default" name that you passed. /// To check existence pass "" or some funny name like "mud in your eye" /// </summary> public static string CAMLThisName(SPList list, string name, string def) { String CAMLName = def; SPField fld = GetFieldByName(list, name); if (fld != null) { CAMLName = fld.InternalName; } return CAMLName; } That’s all folks?!

Read the article

What developer conferences are you going to this year?

- by mbcrump

This short list is what I consider to be the “cream-of-the-crop” in developer conferences. This is also a list of the conferences that I plan on attending in 2011. If you feel your conference is just as good, then shoot me an email at [michael[at]michaelcrump[dot]net, and if possible I will check it out. In-Person Event Las Vegas on April 18th-22nd, 2011 Redmond on October 17th-21st, 2011 Orlando on December 5th-9th, 2011 Visual Studio Live – I attended this event in November of last year and blogged about my experience. I am also planning on going back to the Orlando session in December of this year. So what did I like the most about this event? Being able to interact one-on-one with a majority of the speakers. If you read my blog post then you will see a list of the speakers that I met up with. I also made a lot of great connections with other professional developers all over the world. They are having an event in Las Vegas on April 18th-22nd. I noticed at this event that they have added a new track on mobile. Being a big fan of mobile, I feel that this is a great move. They also have a great selection for Silverlight Developers including Billy Hollis and Rocky Lhotka. For the full lineup of conference tracks, sessions and speakers visit http://bit.ly/VSLiveTrks. If you are interested in this then you can register here by February 16th. I must add that you can save $300 bucks by getting the early-bird special. Virtual Conference SSWUG (DBTechCon) - holds the largest virtual conference in the information technology industry. It is also special to me because they selected a majority of my Silverlight content for the April conference. No traveling fees and all of the sessions are recorded so you can watch them on-demand for $189 bucks (early-bird special). For the entire speaker list then click here. The session list has also been published. If you are interested in this then you can register here. In-Person Event Knoxville, TN on June 3rd/4th 2011. Codestock.org – If you live in the South then you have heard of CodeStock. To my knowledge, they have only had 3 events so far and they were a huge success. It was such a success that after the last event, everyone was telling me how good it was and how much they enjoyed it. They currently have a call for speakers going on right now, so if you have sessions then be sure to submit yours. So, what makes them stand out? Well for starters Michael Neal (organizer) developed an open API so conference attendees could build their own apps for the sessions. They also encouraged their speakers to go to other sessions instead of stay in a “speaker-room”. Another cool feature is that they are uploading videos from the conference so everyone can benefit. They are currently looking for sponsorship, so help out if you can. In-Person Event Redmond, WA on October 28/29 2011 *NOT 100% SURE AT THIS POINT* PDC 11 – OK, so the logo should be pdc11 but its not out yet. This event is located on Microsoft’s campus in Redmond, WA. It is probably one of the most well known conferences for developers to attend. One of the big perks from this event is that you typically come away with free stuff. In 2010 they gave away Windows 7 Phones. I remember years earlier they gave away laptops. This of course isn’t the only reason to go, you may get to tour the Microsoft campus. Since pdc is a huge event, you can view all the events for free. Mike Taulty created a nice Silverlight application that consumes the OData feed. You can download it here. If everything goes as planned, I will be at all of these events. If you plan on going then send me a tweet and we will do lunch or dinner. I love meeting new developers and talking .net. Subscribe to my feed

Read the article

Webcor Builders Coordinates Construction Schedules and Mitigates Potential Delays More Efficiently with Integrated Project Management

- by Sylvie MacKenzie, PMP

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} With more than 40 years of commercial construction experience, Webcor Builders is a leading builder of distinguished, high-profile projects, including high-rise condominiums and hotels, laboratories, healthcare centers, and public works projects. Webcor is also known for its award-winning concrete, interior construction, historic restoration, and seismic renovation work. The company has completed more than 50 million square feet of projects to date. Considering the variety and complexity of the construction projects Webcor undertakes, an integrated project management solution is critical to ensuring optimal efficiency and completing client projects on time and on budget. The company previously used a number of scheduling systems for its various building projects. These packages provided different levels of schedule detail and required schedulers, engineers, and other employees to learn multiple systems. From an IT cost and complexity perspective, the company had to manage multiple scheduling systems and pay for multiple sets of licenses. The company looked to standardize on an enterprise project management system, and selected Oracle’s Primavera P6 Enterprise Project Portfolio Management. Webcor uses the solution’s advanced capabilities to schedule complex projects, analyze delays, model and propose multiple scenarios to demonstrate and mitigate delays and cost overruns, and process that information efficiently to deliver the scheduling precision that public and private projects require. In fact, the solution was instrumental in helping the company’s expansion into public sector projects during the recent economic downturn, and with Primavera P6 in place, it can deliver the precise schedule reporting required for large public projects. With Primavera P6 in place, the company could deliver the precise scheduling and milestone reporting capabilities required for large public projects. The solution is in managing the high-profile University of California – Berkeley Memorial Stadium project. Webcor was hired as construction manager and general contractor for the stadium renovation project, which is a fast-paced project located near the seismically active Hayward Fault Zone. Due to the University of California’s football schedule, meeting the Universities deadline for the coming season placed Webcor in a situation where risk awareness and early warnings of issues would be paramount. Webcor and the extended project team needed a solution that could instantly analyze alternate scenarios to mitigate potential delays; Primavera would deliver those answers.The team would also need to enable multiple stakeholders to use an internet-based platform to access the schedule from various locations, and model complicated sequencing requirements where swift decisions would be made to keep the project on track. The schedule is an integral part of Webcor’s construction management process for the stadium project. Rather than providing the client with the industry-standard monthly update, Webcor updates the critical path method (CPM) schedule on a weekly basis. The project team also reviews the schedule and updates weekly to confirm that progress and forecasted performance are accurate. Hired by the University for their ability to deliver in high risk environments The Webcor team was hit recently with a design supplement that could have added up to 70 days to the project. Using Oracle Primavera P6 the team sprung into action analyzing multiple “what if” scenarios to review mitigation means and methods. Determined to make sure the Bears could take the field in the coming season the project team nearly eliminated the impact with their creative analysis in working the schedule. The total time from the issuance of the final design supplement to an agreed mitigation response was less than one week; leveraging the Oracle Primavera solution Webcor was able to deliver superior customer value With the ability to efficiently manage projects and schedules, Webcor can ensure it completes its projects on time and on budget, as well as inform clients about what changes to plans will mean in terms of delays and additional costs. Read the complete customer case study at : http://www.oracle.com/us/corporate/customers/customersearch/webcor-builders-1-primavera-ss-1639886.html

Read the article

Problem with deleting table rows using ctrl+a for row selection

- by Frank Nimphius

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The following code is commonly shown and documented for how to access the row key of selected table rows in an ADF Faces table configured for multi row selection. public void onRemoveSelectedTableRows(ActionEvent actionEvent) { RichTable richTable = … get access to your table instance … CollectionModel cm =(CollectionModel)richTable.getValue(); RowKeySet rowKeySet = (RowKeySet)richTable.getSelectedRowKeys(); for (Object key : rowKeySet) { richTable.setRowKey(key); JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding)cm.getRowData(); // do something with rowData e.g.update, print, copy } //optional, if you changed data, refresh the table AdfFacesContext adfFacesContext = AdfFacesContext.getCurrentInstance(); adfFacesContext.addPartialTarget(richTable); return null; } The code shown above works for 99.5 % of all use cases that deal with multi row selection enabled ADF Faces tables, except for when users use the ctrl+a key to mark all rows for delete. Just to make sure I am clear: if you use ctrl+a to mark rows to perform any other operation on them – like bulk updating all rows for a specific attribute – then this works with the code shown above. Even for bulk row delete, any other mean of row selection (shift+click and multiple ctrl+click) works like a charm and the rows are deleted. So apparently it is the use of ctrl+a that causes the problem when deleting multiple rows of an ADF Faces table. To implement code that works for all table selection use cases, including the one to delete all table rows in one go, you use the code shown below. public void onRemoveSelectedTableRows(ActionEvent actionEvent) { RichTable richTable = … get access to your table instance … CollectionModel cm = (CollectionModel)richTable.getValue(); RowKeySet rowKeySet = (RowKeySet)richTable.getSelectedRowKeys(); Object[] rowKeySetArray = rowKeySet.toArray(); for (Object key : rowKeySetArray){ richTable.setRowKey(key); JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding)cm.getRowData(); rowData.getRow().remove(); } AdfFacesContext adfFacesContext = AdfFacesContext.getCurrentInstance(); adfFacesContext.addPartialTarget(richTable); }

Read the article

BYOD-The Tablet Difference

- by Samantha.Y. Ma

By Allison Kutz, Lindsay Richardson, and Jennifer Rossbach, Sales Consultants Normal 0 false false false EN-US ZH-TW X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Less than three years ago, Apple introduced a new concept to the world: The Tablet. It’s hard to believe that in only 32 months, the iPad induced an entire new way to do business. Because of their mobility and ease-of-use, tablets have grown in popularity to keep up with the increasing “on the go” lifestyle, and their popularity isn’t expected to decrease any time soon. In fact, global tablet sales are expected to increase drastically within the next five years, from 56 million tablets to 375 million by 2016. Tablets have been utilized for every function imaginable in today’s world. With over 730,000 active applications available for the iPad, these tablets are educational devices, portable book collections, gateways into social media, entertainment for children when Mom and Dad need a minute on their own, and so much more. It’s no wonder that 74% of those who own a tablet use it daily, 60% use it several times a day, and an average of 13.9 hours per week are spent tapping away. Tablets have become a critical part of a user’s personal life; but why stop there? Businesses today are taking major strides in implementing these devices, with the hopes of benefiting from efficiency and productivity gains. Limo and taxi drivers use tablets as payment devices instead of traditional cash transactions. Retail outlets use tablets to find the exact merchandise customers are looking for. Professors use tablets to teach their classes, and business professionals demonstrate solutions and review reports from tablets. Since an overwhelming majority of tablet users have started to use their personal iPads, PlayBooks, Galaxys, etc. in the workforce, organizations have had to make a change. In many cases, companies are willing to make that change. In fact, 79% of companies are making new investments in mobility this year. Gartner reported that 90% of organizations are expected to support corporate applications on personal devices by 2014. It’s not just companies that are changing. Business professionals have become accustomed to tablets making their personal lives easier, and want that same effect in the workplace. Professionals no longer want to waste time manually entering data in their computer, or worse yet in a notebook, especially when the data has to be later transcribed to an online system. The response: the Bring Your Own Device phenomenon. According to Gartner, BOYD is “an alternative strategy allowing employees, business partners and other users to utilize a personally selected and purchased client device to execute enterprise applications and access data.” Employees whose companies embrace this trend are more efficient because they get to use devices they are already accustomed to. Tablets change the game when it comes to how sales professionals perform their jobs. Sales reps can easily store and access customer information and analytics using tablet applications, such as Oracle Fusion Tap. This method is much more enticing for sales reps than spending time logging interactions on their (what seem to be outdated) computers. Forrester & IDC reported that on average sales reps spend 65% of their time on activities other than selling, so having a tablet application to use on the go is extremely powerful. In February, Information Week released a list of “9 Powerful Business Uses for Tablet Computers,” ranging from “enhancing the customer experience” to “improving data accuracy” to “eco-friendly motivations”. Tablets compliment the lifestyle of professionals who strive to be effective and efficient, both in the office and on the road. Three Things Businesses Need to do to Embrace BYOD Make customer-facing websites tablet-friendly for consistent user experiences Develop tablet applications to continue to enhance the customer experience Embrace and use the technology that comes with tablets Almost 55 million people in the U.S. own tablets because they are convenient, easy, and powerful. These are qualities that companies strive to achieve with any piece of technology. The inherent power of the devices coupled with the growing number of business applications ensures that tablets will transform the way that companies and employees perform.

Read the article

2D isometric picking

- by Bikonja

I'm trying to implement picking in my isometric 2D game, however, I am failing. First of all, I've searched for a solution and came to several, different equations and even a solution using matrices. I tried implementing every single one, but none of them seem to work for me. The idea is that I have an array of tiles, with each tile having it's x and y coordinates specified (in this simplified example it's by it's position in the array). I'm thinking that the tile (0, 0) should be on the left, (max, 0) on top, (0, max) on the bottom and (max, max) on the right. I came up with this loop for drawing, which googling seems to have verified as the correct solution, as has the rendered scene (ofcourse, it could still be wrong, also, forgive the messy names and stuff, it's just a WIP proof of concept code) // Draw code int col = 0; int row = 0; for (int i = 0; i < nrOfTiles; ++i) { // XOffset and YOffset are currently hardcoded values, but will represent camera offset combined with HUD offset Point tile = IsoToScreen(col, row, TileWidth / 2, TileHeight / 2, XOffset, YOffset); int x = tile.X; int y = tile.Y; spriteBatch.Draw(_tiles[i], new Rectangle(tile.X, tile.Y, TileWidth, TileHeight), Color.White); col++; if (col >= Columns) // Columns is the number of tiles in a single row { col = 0; row++; } } // Get selection overlay location (removed check if selection exists for simplicity sake) Point tile = IsoToScreen(_selectedTile.X, _selectedTile.Y, TileWidth / 2, TileHeight / 2, XOffset, YOffset); spriteBatch.Draw(_selectionTexture, new Rectangle(tile.X, tile.Y, TileWidth, TileHeight), Color.White); // End of draw code public Point IsoToScreen(int isoX, int isoY, int widthHalf, int heightHalf, int xOffset, int yOffset) { Point newPoint = new Point(); newPoint.X = widthHalf * (isoX + isoY) + xOffset; newPoint.Y = heightHalf * (-isoX + isoY) + yOffset; return newPoint; } This code draws the tiles correctly. Now I wanted to do picking to select the tiles. For this, I tried coming up with equations of my own (including reversing the drawing equation) and I tried multiple solutions I found on the internet and none of these solutions worked. Trying out lots of solutions, I came upon one that didn't work, but it seemed like an axis was just inverted. I fiddled around with the equations and somehow managed to get it to actually work (but have no idea why it works), but while it's close, it still doesn't work. I'm not really sure how to describe the behaviour, but it changes the selection at wrong places, while being fairly close (sometimes spot on, sometimes a tile off, I believe never more off than the adjacent tile). This is the code I have for getting which tile coordinates are selected: public Point? ScreenToIso(int screenX, int screenY, int tileHeight, int offsetX, int offsetY) { Point? newPoint = null; int nX = -1; int nY = -1; int tX = screenX - offsetX; int tY = screenY - offsetY; nX = -(tY - tX / 2) / tileHeight; nY = (tY + tX / 2) / tileHeight; newPoint = new Point(nX, nY); return newPoint; } I have no idea why this code is so close, especially considering it doesn't even use the tile width and all my attempts to write an equation myself or use a solution I googled failed. Also, I don't think this code accounts for the area outside the "tile" (the transparent part of the tile image), for which I intend to add a color map, but even if that's true, it's not the problem as the selection sometimes switches on approx 25% or 75% of width or height. I'm thinking I've stumbled upon a wrong path and need to backtrack, but at this point, I'm not sure what to do so I hope someone can shed some light on my error or point me to the right path. It may be worth mentioning that my goal is to not only pick the tile. Each main tile will be divided into 5x5 smaller tiles which won't be drawn seperately from the whole main tile, but they will need to be picked out. I think a color map of a main tile with different colors for different coordinates within the main tile should take care of that though, which would fall within using a color map for the main tile (for the transparent parts of the tile, meaning parts that possibly belong to other tiles).

Read the article

What do the participants say about the Open Day in South Africa?

- by Maria Sandu

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 On the 26th of September, a group of students who were specifically selected to attend an Open day at Oracle South Africa, joined us at our offices in Woodmead, Johannesburg. The Conference room was filled with inquisitive minds. What we had in store for them was a detailed presentation about Oracle which was delivered by Zuko - Cluster Leader: Tech GB South Africa. The student’s many questions were all answered especially when we started addressing the opportunities we have and detailed information on our Graduate Programme. Our employees then came to talk about their experience. This allowed all the students to have an integrated learning experience. By inviting the students to walk around our Oracle Offices allowed them to see, talk, experience a bit of the culture and ask more questions. Here is some of the feedback from the attendees: Maxwell Moloi: “The open day truly served its purpose and exceeded expectations in the sense that I got to find out more about Oracle and all the different opportunities it has to offer. The fact that Oracle supplies a full solution to a customer and not just part of it and how the company manages to setup professional development for their employees is what entices me to want to join the rapidly growing team of Oracle.” Nqobile Mabaso: “I found the open day to be quite informative and enlightening because coming from a marketing background I could apply the knowledge I got from varsity to the Company I was able to point out what they do as part of their corporate social responsibility (Oracle recently partnered with the department of education to build a school), how Oracle emphasizes on relationship building because they know they sell to people and not companies and how they offer the full stack of solutions which gives them a competitive advantage over their competitors.” Nondumiso Mvelase: “The Open Day was a wonderful experience for me especially because I have never been part of an Open Day before, so it was absolutely amazing for me. It gave me a good idea of how it is to be part of Oracle. We were served with lovely breakfast and lunch which I enjoyed. I wish the Open Day went on for a whole week. Seeing and hearing from 2013 Graduates, telling us about their experience within Oracle was very inspiring to me. They were encouraging us to work hard if we ever got the opportunity they had. After hearing this from them I will definitely not take it for granted.” Itumeleng Moraka: “Before I walked into the Oracle offices all that was in my mind was databases and cloud storage. I was then surrounded by passionate, enthusiastic and welcoming employees. I came across a positive energy within the multinational company. I realized that Oracle is not a company that operates in survival mode. This may sound idealistic, but they operate in a non-traditional way investing more into innovation, they stay focused on what matters most about where technology is going and at the same time they are not losing sight of how their products make a difference in the world.” For more information on how to be part of the Oracle Graduate Programme please follow us on Facebook! https://www.facebook.com/CampusAtOracle /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

Coherence Data Guarantees for Data Reads - Basic Terminology

- by jpurdy

When integrating Coherence into applications, each application has its own set of requirements with respect to data integrity guarantees. Developers often describe these requirements using expressions like "avoiding dirty reads" or "making sure that updates are transactional", but we often find that even in a small group of people, there may be a wide range of opinions as to what these terms mean. This may simply be due to a lack of familiarity, but given that Coherence sits at an intersection of several (mostly) unrelated fields, it may be a matter of conflicting vocabularies (e.g. "consistency" is similar but different in transaction processing versus multi-threaded programming). Since almost all data read consistency issues are related to the concept of concurrency, it is helpful to start with a definition of that, or rather what it means for two operations to be concurrent. Rather than implying that they occur "at the same time", concurrency is a slightly weaker statement -- it simply means that it can't be proven that one event precedes (or follows) the other. As an example, in a Coherence application, if two client members mutate two different cache entries sitting on two different cache servers at roughly the same time, it is likely that one update will precede the other by a significant amount of time (say 0.1ms). However, since there is no guarantee that all four members have their clocks perfectly synchronized, and there is no way to precisely measure the time it takes to send a given message between any two members (that have differing clocks), we consider these to be concurrent operations since we can not (easily) prove otherwise. So this leads to a question that we hear quite frequently: "Are the contents of the near cache always synchronized with the underlying distributed cache?". It's easy to see that if an update on a cache server results in a message being sent to each near cache, and then that near cache being updated that there is a window where the contents are different. However, this is irrelevant, since even if the application reads directly from the distributed cache, another thread update the cache before the read is returned to the application. Even if no other member modifies a cache entry prior to the local near cache entry being updated (and subsequently read), the purpose of reading a cache entry is to do something with the result, usually either displaying for consumption by a human, or by updating the entry based on the current state of the entry. In the former case, it's clear that if the data is updated faster than a human can perceive, then there is no problem (and in many cases this can be relaxed even further). For the latter case, the application must assume that the value might potentially be updated before it has a chance to update it. This almost aways the case with read-only caches, and the solution is the traditional optimistic transaction pattern, which requires the application to explicitly state what assumptions it made about the old value of the cache entry. If the application doesn't want to bother stating those assumptions, it is free to lock the cache entry prior to reading it, ensuring that no other threads will mutate the entry, a pessimistic approach. The optimistic approach relies on what is sometimes called a "fuzzy read". In other words, the application assumes that the read should be correct, but it also acknowledges that it might not be. (I use the qualifier "sometimes" because in some writings, "fuzzy read" indicates the situation where the application actually sees an original value and then later sees an updated value within the same transaction -- however, both definitions are roughly equivalent from an application design perspective). If the read is not correct it is called a "stale read". Going back to the definition of concurrency, it may seem difficult to precisely define a stale read, but the practical way of detecting a stale read is that is will cause the encompassing transaction to roll back if it tries to update that value. The pessimistic approach relies on a "coherent read", a guarantee that the value returned is not only the same as the primary copy of that value, but also that it will remain that way. In most cases this can be used interchangeably with "repeatable read" (though that term has additional implications when used in the context of a database system). In none of cases above is it possible for the application to perform a "dirty read". A dirty read occurs when the application reads a piece of data that was never committed. In practice the only way this can occur is with multi-phase updates such as transactions, where a value may be temporarily update but then withdrawn when a transaction is rolled back. If another thread sees that value prior to the rollback, it is a dirty read. If an application uses optimistic transactions, dirty reads will merely result in a lack of forward progress (this is actually one of the main risks of dirty reads -- they can be chained and potentially cause cascading rollbacks). The concepts of dirty reads, fuzzy reads, stale reads and coherent reads are able to describe the vast majority of requirements that we see in the field. However, the important thing is to define the terms used to define requirements. A quick web search for each of the terms in this article will show multiple meanings, so I've selected what are generally the most common variations, but it never hurts to state each definition explicitly if they are critical to the success of a project (many applications have sufficiently loose requirements that precise terminology can be avoided).

Read the article

How to fix Ubuntu 12.04.3 boot to black screen full of errors in white text, after upgrading on dell inspiron 1501

- by Ibuntu

I am running a Dell Inspiron 1501 I use Linux only. No Microsoft or Apple operating systems (or really anything closed-source). I've only been using Linux for a little over a year but I'm starting to gain a comfortable level of familiarity with the system and terminology. I've been having some issues with Quantel Quetzal and Raring Ringtail, especially with older hardware, so I opted to install Ubuntu 12.04.3 Precise Pangolin on the Inspiron 1501. I checked my MD5 sum after downloading my ISO and all was good. I have in fact used this iso/dvd to install Precise Pangolin successfully on a few other systems (some of which are even older than this laptop). Install goes fine. The wireless card doesn't work out of the box but this is a known issue which is fairly easy to fix. So, first thing I did was open up a terminal and run sudo apt-get update && sudo apt-get upgrade which, part way through, crashed (I assume lightdm and possibly X) and took me to a black screen filled with white lines of text that were either errors or just the ouputs of commands. The reason I say that is because I was unable to gleam any useful information from the output on the screen. I did take a picture however and will post a link. After that, every time I boot the system it goes right to that black screen posting all the error messages or output in white text. I never get a purple Ubuntu splash, so from what I can tell after reading this wiki article: https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen That means that after the kernel is selected, it is unable to correctly implement the settings it needs. If the purple splash never shows, the frame buffer was never set correctly right? This leads me to believe that it could be a kernel issue? The wiki suggested to try and pinpoint the issue by rolling back kernels until I find one that works. Is this my best option? I think I'm going to give it a try anyways and will let everyone know if I am able to solve the issue this way. I have since done a few reinstalls and some trouble-shooting including a couple hours scouring the net for anyone with any kind of similar issue. Most of the issues I could find involved getting a black screen after login and none of them said anything about any information output on this black screen. My reinstalls have taught me that there is no issue updating, but as soon as I run sudo apt-get upgrade my system goes to the black screen and every time I boot it up it does the same thing. The only way to fix is by reinstall. I never get any ability to log in. After a hard power off to the laptop (because I cannot use ctrl+alt+del to reboot) when it boots again it goes to the grub boot menu and I can select between regular boot, recovery mode and the two memtest options. I never tried the memtest options but the other two both lead to the same black screen. Some people having a black/blank screen issue claim to have fixed it by using 12.10 or 13.04 but I believe they were having a different issue where they got a black/blank screen after logging in. I think I will still give these images a try, but mostly figured I would just wait another day or two for 13.10. Other things I figured I would try from the following three articles: After logging in, there's a black screen and my cursor, nothing else! in Ubuntu 12.10 Black Screen on Login After Upgrading to 12.04 I can't get to the login screen include opening a terminal using ctrl+alt+f1 and trying a variety of reseting unity, x settings, lightdm (or switching to gdm); but I doubt this will work or that I will even be able to access a terminal. I'm pretty sure the whole system is stuck after it loads the last line on the black screen. I will try these things and post more information when I have. Hopefully someone has an idea in the meantime and I will keep checking back trying to find a solution. Thank you. Here are 3 different pictures of the error message. I had to take with my phone: http://ubuntuone.com/album/0TBBkxmVajJIQQtoN9mVdN

Read the article

With Its MySQL Database-as-a-Service CERN Empowers Scientists

- by Bertrand Matthelié

The European Organization for Nuclear Research (CERN) is one of the world’s largest and most respected centers for scientific research. Founded in 1954 and located near Geneva on the Franco-Swiss border, CERN was one of Europe’s first joint ventures. Today, it has 20 member states. The organization uses the world’s largest and most complex scientific instruments to study fundamental particles and the origin of the universe. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Challenges Better support the scientists associated with a CERN research program who selected MySQL as their database. Empower users, enabling them to be as self-reliant as possible. Minimize complexity and costs for the CERN IT department to support the growing number of MySQL deployments. Solution Delivered a MySQL Database-as-a-Service offering to the CERN employees and the scientists associated with the organization. Allowed researchers selecting MySQL for their project to get access to a database instance hosted by the CERN IT department, either from the start or once their application has become critical. Implemented the service using Oracle’s server virtualization software, Oracle VM, for increased flexibility and reduced costs. Empowered users with a self-service approach, providing them with tools to manage MySQL themselves while handling backups and other basic database administration tasks for them. Enabled scientists to rely on MySQL with increased reliability, security and manageability while reducing complexity and minimizing costs. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} "The Cloud model has allowed us to deliver a self-service platform to our MySQL users, empowering them while minimizing costs for CERN." Tony Cass, Database Services Group Leader, IT department, CERN.

Read the article

Grub won't boot windows after update from 11.10 to 12.04

- by Holger

thanks for your time and reading this, here's the deal: i upgraded from 11.10 to 12.04 and everything worked out until i rebooted, i had 11.10 sucessfully running as a dual boot with windows vista. when i rebooted, my GRUB was shot to hell, what ever option i selected it said partion not found or something similar... booting into a live version on a thumb drive and running bootrepair from there fixed the issue... but only for ubuntu, when i try to boot into windows it only goes back to GRUB. i'm not at home, and heres a list of what i have here with me... 1 4gb thumb drive, empty 1 8gb thumb drive, windows vista installer bootable 1 old laptop, the one i try to save, optical drive is not existent 2 Mbps internet connection can you help me get back into my windows without having to reinstall windows? or at least show me a way how to use my illustrator through a virtual machine or something? here's my grub cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e set locale_dir=($root)/boot/grub/locale set lang=de_DE insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, mit Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e linux /boot/vmlinuz-3.2.0-24-generic root=UUID=1063e402-b14f-45e5-92b6-d20a2e3a717e ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, mit Linux 3.2.0-24-generic (Wiederherstellungsmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e echo 'Linux 3.2.0-24-generic wird geladen …' linux /boot/vmlinuz-3.2.0-24-generic root=UUID=1063e402-b14f-45e5-92b6-d20a2e3a717e ro recovery nomodeset echo 'Initiale Ramdisk wird geladen …' initrd /boot/initrd.img-3.2.0-24-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, mit Linux 3.0.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e linux /boot/vmlinuz-3.0.0-19-generic root=UUID=1063e402-b14f-45e5-92b6-d20a2e3a717e ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-19-generic } menuentry 'Ubuntu, mit Linux 3.0.0-19-generic (Wiederherstellungsmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e echo 'Linux 3.0.0-19-generic wird geladen …' linux /boot/vmlinuz-3.0.0-19-generic root=UUID=1063e402-b14f-45e5-92b6-d20a2e3a717e ro recovery nomodeset echo 'Initiale Ramdisk wird geladen …' initrd /boot/initrd.img-3.0.0-19-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows Vista (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 2C9E66B39E6674EC chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ###

Read the article

Data Source Security Part 4

- by Steve Felts

So far, I have covered Client Identity and Oracle Proxy Session features, with WLS or database credentials. This article will cover one more feature, Identify-based pooling. Then, there is one more topic to cover - how these options play with transactions.Identity-based Connection Pooling An identity based pool creates a heterogeneous pool of connections. This allows applications to use a JDBC connection with a specific DBMS credential by pooling physical connections with different DBMS credentials. The DBMS credential is based on either the WebLogic user mapped to a database user or the database user directly, based on the “use database credentials” setting as described earlier. Using this feature enabled with “use database credentials” enabled seems to be what is proposed in the JDBC standard, basically a heterogeneous pool with users specified by getConnection(user, password). The allocation of connections is more complex if Enable Identity Based Connection Pooling attribute is enabled on the data source. When an application requests a database connection, the WebLogic Server instance selects an existing physical connection or creates a new physical connection with requested DBMS identity. The following section provides information on how heterogeneous connections are created:1. At connection pool initialization, the physical JDBC connections based on the configured or default “initial capacity” are created with the configured default DBMS credential of the data source.2. An application tries to get a connection from a data source.3a. If “use database credentials” is not enabled, the user specified in getConnection is mapped to a DBMS credential, as described earlier. If the credential map doesn’t have a matching user, the default DBMS credential is used from the datasource descriptor.3b. If “use database credentials” is enabled, the user and password specified in getConnection are used directly.4. The connection pool is searched for a connection with a matching DBMS credential.5. If a match is found, the connection is reserved and returned to the application.6. If no match is found, a connection is created or reused based on the maximum capacity of the pool: - If the maximum capacity has not been reached, a new connection is created with the DBMS credential, reserved, and returned to the application.- If the pool has reached maximum capacity, based on the least recently used (LRU) algorithm, a physical connection is selected from the pool and destroyed. A new connection is created with the DBMS credential, reserved, and returned to the application. It should be clear that finding a matching connection is more expensive than a homogeneous pool. Destroying a connection and getting a new one is very expensive. If you can use a normal homogeneous pool or one of the light-weight options (client identity or an Oracle proxy connection), those should be used instead of identity based pooling. Regardless of how physical connections are created, each physical connection in the pool has its own DBMS credential information maintained by the pool. Once a physical connection is reserved by the pool, it does not change its DBMS credential even if the current thread changes its WebLogic user credential and continues to use the same connection. To configure this feature, select Enable Identity Based Connection Pooling. See http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jdbc/jdbc_datasources/EnableIdentityBasedConnectionPooling.html "Enable identity-based connection pooling for a JDBC data source" in Oracle WebLogic Server Administration Console Help. You must make the following changes to use Logging Last Resource (LLR) transaction optimization with Identity-based Pooling to get around the problem that multiple users will be accessing the associated transaction table.- You must configure a custom schema for LLR using a fully qualified LLR table name. All LLR connections will then use the named schema rather than the default schema when accessing the LLR transaction table. - Use database specific administration tools to grant permission to access the named LLR table to all users that could access this table via a global transaction. By default, the LLR table is created during boot by the user configured for the connection in the data source. In most cases, the database will only allow access to this user and not allow access to mapped users. Connections within Transactions Now that we have covered the behavior of all of these various options, it’s time to discuss the exception to all of the rules. When you get a connection within a transaction, it is associated with the transaction context on a particular WLS instance. When getting a connection with a data source configured with non-XA LLR or 1PC (using the JTS driver) with global transactions, the first connection obtained within the transaction is returned on subsequent connection requests regardless of the values of username/password specified and independent of the associated proxy user session, if any. The connection must be shared among all users of the connection when using LLR or 1PC. For XA data sources, the first connection obtained within the global transaction is returned on subsequent connection requests within the application server, regardless of the values of username/password specified and independent of the associated proxy user session, if any. The connection must be shared among all users of the connection within a global transaction within the application server/JVM.

Read the article

ComboBox Data Binding

- by Geertjan

Let's create a databound combobox, levering MVC in a desktop application. The result will be a combobox, provided by the NetBeans ChoiceView, that displays data retrieved from a database: What follows is not much different from the NetBeans Platform CRUD Application Tutorial and you're advised to consult that document if anything that follows isn't clear enough. One kind of interesting thing about the instructions that follow is that it shows that you're able to create an application where each element of the MVC architecture can be located within a separate module: Start by creating a new NetBeans Platform application named "MyApplication". Model We're going to start by generating JPA entity classes from a database connection. In the New Project wizard, choose "Java Class Library". Click Next. Name the Java Class Library "MyEntities". Click Finish. Right-click the MyEntities project, choose New, and then select "Entity Classes from Database". Work through the wizard, selecting the tables of interest from your database, and naming the package "entities". Click Finish. Now a JPA entity is created for each of the selected tables. In the Project Properties dialog of the project, choose "Copy Dependent Libraries" in the Packaging panel. Build the project. In your project's "dist" folder (visible in the Files window), you'll now see a JAR, together with a "lib" folder that contains the JARs you'll need. In your NetBeans Platform application, create a module named "MyModel", with code name base "org.my.model". Right-click the project, choose Properties, and in the "Libraries" panel, click Add Dependency button in the Wrapped JARs subtab to add all the JARs from the previous step to the module. Also include "derby-client.jar" or the equivalent driver for your database connection to the module. Controler In your NetBeans Platform application, create a module named "MyControler", with code name base "org.my.controler". Right-click the module's Libraries node, in the Projects window, and add a dependency on "Explorer & Property Sheet API". In the MyControler module, create a class with this content: package org.my.controler; import org.openide.explorer.ExplorerManager; public class MyUtils { static ExplorerManager controler; public static ExplorerManager getControler() { if (controler == null) { controler = new ExplorerManager(); } return controler; } } View In your NetBeans Platform application, create a module named "MyView", with code name base "org.my.view". Create a new Window Component, in "explorer" view, for example, let it open on startup, with class name prefix "MyView". Add dependencies on the Nodes API and on the Explorer & Property Sheet API. Also add dependencies on the "MyModel" module and the "MyControler" module. Before doing so, in the "MyModel" module, make the "entities" package and the "javax.persistence" packages public (in the Libraries panel of the Project Properties dialog) and make the one package that you have in the "MyControler" package public too. Define the top part of the MyViewTopComponent as follows: public final class MyViewTopComponent extends TopComponent implements ExplorerManager.Provider { ExplorerManager controler = MyUtils.getControler(); public MyViewTopComponent() { initComponents(); setName(Bundle.CTL_MyViewTopComponent()); setToolTipText(Bundle.HINT_MyViewTopComponent()); setLayout(new BoxLayout(this, BoxLayout.PAGE_AXIS)); controler.setRootContext(new AbstractNode(Children.create(new ChildFactory<Customer>() { @Override protected boolean createKeys(List list) { EntityManager entityManager = Persistence. createEntityManagerFactory("MyEntitiesPU").createEntityManager(); Query query = entityManager.createNamedQuery("Customer.findAll"); list.addAll(query.getResultList()); return true; } @Override protected Node createNodeForKey(Customer key) { Node customerNode = new AbstractNode(Children.LEAF, Lookups.singleton(key)); customerNode.setDisplayName(key.getName()); return customerNode; } }, true))); controler.addPropertyChangeListener(new PropertyChangeListener() { @Override public void propertyChange(PropertyChangeEvent evt) { Customer selectedCustomer = controler.getSelectedNodes()[0].getLookup().lookup(Customer.class); StatusDisplayer.getDefault().setStatusText(selectedCustomer.getName()); } }); JPanel row1 = new JPanel(new FlowLayout(FlowLayout.LEADING)); row1.add(new JLabel("Customers: ")); row1.add(new ChoiceView()); add(row1); } @Override public ExplorerManager getExplorerManager() { return controler; } ... ... ... Now run the application and you'll see the same as the image with which this blog entry started.

Read the article

c# display DB table structure

- by user3529643

I have a question. My code is the following : public partial class Form1 : Form { public OleDbConnection datCon; public string MyDataFile; public ArrayList tblArray; public ArrayList fldArray; public Form1() { InitializeComponent(); lvData.Clear(); lvData.View = View.Details; lvData.LabelEdit = false; lvData.FullRowSelect = true; lvData.GridLines = true; } private void DataConnection() { MyDataFile = Application.StartupPath + @"\studenti.mdb"; string MyCon = @"provider=microsoft.jet.oledb.4.0;data source=" + MyDataFile; try { datCon = new OleDbConnection(MyCon); } catch (Exception ex) { MessageBox.Show(ex.Message); } FillTreeView(); } private void GetTables(OleDbConnection cnn) { try { cnn.Open(); DataTable schTable = cnn.GetOleDbSchemaTable(OleDbSchemaGuid.Tables, new Object[] { null, null, null, "TABLE" }); tblArray = new ArrayList(); foreach (DataRow datrow in schTable.Rows) { tblArray.Add(datrow["TABLE_NAME"].ToString()); } cnn.Close(); } catch (Exception ex) { MessageBox.Show(ex.Message); } } private void GetFields(OleDbConnection cnn, string tabNode) { string tabName; try { tabName = tabNode; cnn.Open(); DataTable schTable = cnn.GetOleDbSchemaTable(OleDbSchemaGuid.Columns, new Object[] { null, null, tabName }); fldArray = new ArrayList(); foreach (DataRow datRow in schTable.Rows) { fldArray.Add(datRow["COLUMN_NAME"].ToString()); } cnn.Close(); } catch (Exception ex) { MessageBox.Show(ex.Message); } } private void FillTreeView() { tvData.Nodes.Clear(); tvData.Nodes.Add("Database"); tvData.Nodes[0].Tag = "RootDB"; GetTables(datCon); // add table node for (int i = 0; i < tblArray.Count; i++) { tvData.Nodes[0].Nodes.Add(tblArray[i].ToString()); tvData.Nodes[0].Nodes[i].Tag = "Tables"; } // add field node for (int i = 0; i < tblArray.Count; i++) { GetFields(datCon, tblArray[i].ToString()); for (int j = 0; j < fldArray.Count; j++) { tvData.Nodes[0].Nodes[i].Nodes.Add(fldArray[j].ToString()); tvData.Nodes[0].Nodes[i].Nodes[j].Tag = "Fields"; } } this.tvData.ContextMenuStrip = contextMenuStrip1; contextMenuStrip1.ItemClicked +=contextMenuStrip1_ItemClicked; } public void FillListView(OleDbConnection cnn, string tabName) { OleDbCommand cmdRead; OleDbDataReader datReader; string strField; lblTableName.Text = tabName; strField = "SELECT * FROM [" + tabName + "]"; // Initi cmdRead obiect cmdRead = new OleDbCommand(strField, cnn); cnn.Open(); datReader = cmdRead.ExecuteReader(); // fill ListView while (datReader.Read()) { ListViewItem objListItem = new ListViewItem(datReader.GetValue(0).ToString()); for (int c = 1; c < datReader.FieldCount; c++) { objListItem.SubItems.Add(datReader.GetValue(c).ToString()); } lvData.Items.Add(objListItem); } datReader.Close(); cnn.Close(); } private void ViewToolStripMenuItem_Click(object sender, EventArgs e) { DataConnection(); } public void tvData_AfterExpand(object sender, System.Windows.Forms.TreeViewEventArgs e) { string tabName; int fldCount; if (e.Node.Tag.ToString() == "Tables") { fldCount = e.Node.GetNodeCount(false); //column headers. int n = lvData.Width; double wid = n / fldCount; // width columnn for (int c = 0; c < fldCount; c++) { lvData.Columns.Add(e.Node.Nodes[c].Text, (int)wid, HorizontalAlignment.Left); } // gett table name tabName = e.Node.Text; FillListView(datCon, tabName); } } public void button1_Click(object sender, EventArgs e) { //TO DO?? } } I have a treeview populated with tables (nodes) from my database, and a listview which is populated with the data from my tables when I click on a table. As you can see I have a button1 on my form. When I click it I want it to display to me the structure of the table I selected in my treeview (a treeview node). Not too many details, just the name of the columns in my table, type of columns, primary keys. I've tried to follow many tutorials but I can t seem to manage it.

Read the article

Copies of GameScene created when called additional times

- by Orin MacGregor

I have a game with a level select managed by a SceneManager, which basically just uses ReplaceScene. The first time I load a level everything works fine. On subsequent calls, for example: completing the level and continuing to the next, things blow up. The level loads fine, but when I try to pan the map or try to move the player the game crashes. Debugging through I found that there are multiple occurrences of self and related children like player and mapLayer. As a test, I put this code in my ccTouchesBegan: NSLog(@"test %i", [self retainCount]); The first time a level is loaded, it gives: test 2 The second time I load a level it gives: test 2 test 1 as in it spits out both values by looping through twice, not just appending an output to the last. It continues with this pattern for each subsequent load. So the third time will give 2 1 1. Particular code that causes the game to crash involve calling _tileMap.tileSize because there is a second GameScene with a tileMap that was supposedly destroyed, so it has tileSize and mapSize of 0. I noticed dealloc doesn't really ever get called, so I tried to manage some things with -(void) onExit -(void) onExit { [self unscheduleAllSelectors]; [_player stopAllActions]; //stop any animations just in case. normally handled in ccTouchesEnded [self removeAllChildrenWithCleanup:YES]; } I never replace the GameScene while I'm in a GameScene; if the level is completed it goes to a GameOver scene, or I use a back button that goes to the LevelSelect scene. This is [the relevant parts of] my init, in case something like the adding of children matters: -(id) init { _mapLayer = [CCLayer node]; //load data for level GameData *gameData = [GameDataParser loadData]; int selectedChapter = gameData.selectedChapter; int selectedLevel = gameData.selectedLevel; Levels *chapterLevels = [LevelParser loadLevelsForChapter:selectedChapter]; //loop until we get selected level, then do stuff for (Level *level in chapterLevels.levels) { if (level.number == selectedLevel) { //load the level map _tileMap = [CCTMXTiledMap tiledMapWithTMXFile:level.file]; } } _background = [_tileMap layerNamed:@"Background"]; _foreground = [_tileMap layerNamed:@"Foreground"]; _meta = [_tileMap layerNamed:@"Meta"]; _meta.visible = NO; //initialize Spawn Point object and place player there CCTMXObjectGroup *objects = [_tileMap objectGroupNamed:@"Objects"]; NSAssert(objects != nil, @"'Objects' object group not found"); NSMutableDictionary *spawnPoint = [objects objectNamed:@"SpawnPoint"]; NSAssert(spawnPoint != nil, @"SpawnPoint object not found"); int x = [[spawnPoint valueForKey:@"x"] intValue] / retinaScaling; int y = [[spawnPoint valueForKey:@"y"] intValue] / retinaScaling; //setup animations [[CCSpriteFrameCache sharedSpriteFrameCache] addSpriteFramesWithFile:@"MouseRightAnim_24x21.plist"]; CCSpriteBatchNode *spriteSheet = [CCSpriteBatchNode batchNodeWithFile:@"MouseRightAnim_24x21.png"]; [_mapLayer addChild:spriteSheet z:1]; NSMutableArray *rightAnimFrames = [NSMutableArray array]; for(int i = 1; i <= 3; ++i) { [rightAnimFrames addObject: [[CCSpriteFrameCache sharedSpriteFrameCache] spriteFrameByName: [NSString stringWithFormat:@"MouseRight%d_24x21.png", i]]]; } CCAnimation *rightAnim = [CCAnimation animationWithSpriteFrames:rightAnimFrames delay:0.1f]; self.player = [CCSprite spriteWithSpriteFrameName:@"MouseRight2_24x21.png"]; _player.position = ccp(x, y); self.rightAction = [CCRepeatForever actionWithAction:[CCAnimate actionWithAnimation:rightAnim]]; rightAnim.restoreOriginalFrame = NO; [spriteSheet addChild:_player]; //get map size in pixels mapHeight = _tileMap.contentSize.height; mapWidth = _tileMap.contentSize.width; //setup defaults //this value works well for the calculation later, trial and error really distance = 150; lastGoodDistance = 150; mapScale = 1; [self setViewpointCenter:_player.position]; [_mapLayer addChild:_tileMap]; [self addChild:_mapLayer z:-1]; self.isTouchEnabled = YES; } return self; } And here's the SceneManager code for replacing scenes: +(void) goGameScene { CCLayer *gameLayer = [GameScene node]; [SceneManager go:gameLayer:[GameHUD node]]; } //this is what every call looks like besides the GameScene one above +(void) goLevelSelect { [SceneManager go:[LevelSelect node]:nil]; } +(void) go:(CCLayer *)layer: (CCLayer *)hudLayer { CCDirector *director = [CCDirector sharedDirector]; CCScene *newScene = [SceneManager wrap:layer:hudLayer]; if ([director runningScene]) { [director replaceScene:newScene]; } else { [director runWithScene:newScene]; } } +(CCScene *) wrap:(CCLayer *)layer: (CCLayer *)hudLayer { CCScene *newScene = [CCScene node]; [newScene addChild: layer]; if (hudLayer != nil) { [newScene addChild: hudLayer z:1]; } return newScene; } Any ideas why I'm getting these fatal artifacts? I'm hoping this isn't considered too localized since it basically combines 3 tutorials that anyone could end up following. (Ray Wenderlich Animations, Tim Roadley Scene Manager, Pan and Zoom with Tiled Maps.

Read the article

What's New in Oracle VM VirtualBox 4.2?

- by Fat Bloke

A year is a long time in the IT industry. Since the last VirtualBox feature release, which was a little over a year ago, we've seen: new releases of cool new operating systems, such as Windows 8, ChromeOS, and Mountain Lion; we've seen a myriad of new Linux releases from big Enterprise class distributions like Oracle 6.3, to accessible desktop distros like Ubuntu 12.04 and Fedora 17; and we've also seen the spec of a typical PC or laptop double in power. All of these events have influenced our new VirtualBox version which we're releasing today. Here's how... Powerful hosts One of the trends we've seen is that as the average host platform becomes more powerful, our users are consistently running more and more vm's. Some of our users have large libraries of vm's of various vintages, whilst others have groups of vm's that are run together as an assembly of the various tiers in a multi-tiered software solution, for example, a database tier, middleware tier, and front-ends. So we're pleased to unveil a more powerful VirtualBox Manager to address the needs of these users: VM Groups Groups allow you to organize your VM library in a sensible way, e.g. by platform type, by project, by version, by whatever. To create groups you can drag one VM onto another or select one or more VM's and choose Machine...Group from the menu bar. You can expand and collapse groups to save screen real estate, and you can Enter and Leave a group (think iPad navigation here) by using the right and left arrow keys when groups are selected. But groups are more than passive folders, because you can now also perform operations on groups, rather than all the individual VMs. So if you have a multi-tiered solution you can start the whole stack up with just one click. Autostart Many VirtualBox users run dedicated services in their VMs, for example, running a Wiki. With these types of VM workloads, you really want the VM start up when the host machine boots up. So with 4.2 we've introduced a cross-platform Auto-start mechanism to allow you to treat VMs as host services. Headless VM Launching With VM's such as web servers, wikis, and other types of server-class workloads, the Console of the VM is pretty much redundant. For some time now VirtualBox has offered a separate launch mechanism for these VM's, namely the command-line interface commands VBoxHeadless or VBoxManage startvm ... --type headless commands. But with 4.2 we also allow you launch headless VMs from the Manager. Simply hold down Shift when launching the VM from the Manager. It's that easy. But how do you stop a headless VM? Well, with 4.2 we allow you to Close the VM from the Manager. (BTW best to use the ACPI Shutdown method which allows the guest VM to close down gracefully.) Easy VM Creation For our expert users, the New VM Wizard was a little tiresome, so now there's a faster 2-click VM creation mode. Just Hide the description when creating a new VM. Powerful VMs As the hosts have become more powerful, so are the guests that are running inside them. Here are some of the 4.2 features to accommodate them: Virtual Network Interface Cards With 4.2, it's now possible to create VMs with up to 36 NICs, when using the ICH9 chipset emulation. But with great power comes great responsibility (didn't Obi-Wan say something similar?), and so we have also introduced bandwidth limiting to prevent a rogue VM stealing the whole pipe. VLAN tagging Some of our users leverage VLANs extensively so we've enhanced the E1000 NICs to support this. Processor Performance If you are running a CPU which supports Nested Paging (aka EPT in the Intel world) such as most of the Core i5 and i7 CPUs, or are running an AMD Bulldozer or later, you should see some performance improvements from our work with these processors. And while we're talking Processors, we've added support for some of the more modern VIA CPUs too. Powerful Automation Because VirtualBox runs atop a fully blown operating system, it makes sense to leverage the capabilities of the host to run scripts that can drive the guest VMs. Guest Automation was introduced in a prior release but with 4.2 we've revamped the APIs to allow a richer and more powerful set of operations to be executed by the guest. Check out the IGuest APIs in the VirtualBox Programming Guide and Reference (SDK). Powerful Platforms All the hardcore engineering that has gone into 4.2 has been done for a purpose and that is to deliver a fast and powerful engine that can run almost any x86 OS because of the integrity of the virtualization. So we're pleased to add support for these platforms: Mac OS X "Mountain Lion" Windows 8 Windows Server 2012 Ubuntu 12.04 (“Precise Pangolin”) Fedora 17 Oracle Linux 6.3 Here's the proof: We don't have time to go into the myriad of smaller improvements such as support for burning audio CDs from a guest, bi-directional clipboard control, drag-and-drop of files into Linux guests, etc. so we'll leave that as an exercise for the user as soon as you've downloaded from the Oracle or community site and taken a peek at the User Guide. So all in all, a pretty solid release, one that we hope you'll enjoy discovering. - FB

Read the article

Traversing Java Object Arrays [migrated]

- by Sundi

Please Help. Program does not read Array rentBooks[] in the for() loop this option is selected when choosing option 2 then option 4 in the menu The Array reads perfectly when reading the items after the setBook() Method import java.io.File; import java.io.FileNotFoundException; import java.util.Scanner; import java.io.*; import java.util.Locale; import java.text.SimpleDateFormat ; class Library { protected static String Author; protected static String Title; SimpleDateFormat PublicationDate; int itemCode; int available = 1; } class Book extends Library { protected static String PublisherName; protected static String Edition; static Book[] rentBooks = new Book[5]; //Book[] rentBooks = new Book[5]; int count = 0; public Book() { String start= "start"; showBook.main(anza); } public void setBook( String Auth, String Titl, String PublishName) { this.Author = Auth; this.Title = Titl; this.PublisherName = PublishName; } public void getBook() { //System.out.println("*************BOOKS*************************"); System.out.println( "\n\nThe Author of the first Book is "+ this.Author ); System.out.println( "The Title of the book is "+ this.Title); System.out.println( "The Publisher of the book is "+ this.PublisherName ); // System.out.println( "The Edition of the book is "+ Edition ); } } class showBook{ static Book[] rentBooks = new Book[5]; static Book[] rentBooks2 = new Book[5]; static int a,b; //for ( a=0; a < 5; a++ ) //rentBooks2[a] = new Book(); public static void main(String[] args) { File file = new File("Book2.txt"); //Book libraryBooks = new Book(); int j; //initialise Array Class Objects for( j = 0; j < 5; j++) { rentBooks[j] = new Book(); } int i = 0; try{ Scanner scanner = new Scanner(file); scanner.useDelimiter(","); String loan=""; int loan2; while( scanner.hasNextLine()) { //Should the Books be Stored in An Array? // At the moment you have separate objects stored in unknown location String Author = scanner.next(); String Title = scanner.next(); String PublisherName = scanner.next(); if ( i < 4) { System.out.println(i); rentBooks[i].setBook(Author, Title, PublisherName); rentBooks[i].getBook(); // MEMBERS SHOWN i++; } public class readBook4{ public static void main(String[] args) { int number =0; System.out.println( "Please select one of the choices below " ); System.out.println( "Select option 1 to list all items in the library "); System.out.println( "Select option 2 to list the items by category"); System.out.println( "Select option 3 to choose item available in the library "); System.out.println( "Select option 7 to exit " ); InputStreamReader isr = new InputStreamReader( System.in); BufferedReader buffer = new BufferedReader( isr); String input = ""; try { input = buffer.readLine(); number = Integer.parseInt(input); //int number = Integer.parseInt( Edition); if ( number == 1 ) { System.out.println( " \nThanks you are reading "+ input); //showStudent.main(args); showPeriodical.main(args); showDVD.main(args); // showBook.main(args); } if ( number == 2 ) { //jht.cls(); int number2; System.out.println( "Please select one of the choices below " ); System.out.println( "Select option 4 to list Books only "); System.out.println( "Select option 5 to list the Periodicals only"); System.out.println( "Select option 6 to list DVDs only"); InputStreamReader isr2 = new InputStreamReader(System.in); BufferedReader buffer2 = new BufferedReader(isr2); String input2 = ""; try { input2 = buffer2.readLine(); buffer.close(); } catch(IOException e) { System.out.println("An input error has occured"); } //System.out.println("Thanks, you are reading" + input2); number2 = Integer.parseInt(input2); if ( number2 == 4 ) { showBook.main(args); } if ( number2 == 5 ) { showPeriodical.main(args); } if ( number2 == 6 ) { showDVD.main(args); } // readBook4.main(args); } if( number == 3 ) { //showBook.main(args); showBook.availableBooks(); showDVD.availableDVD(); showPeriodical.availablePeriodical(); } if ( number == 7 ) { showStudent.main(args); } buffer.close(); } catch( IOException e ) { System.out.println( " An input error has occured "); } //System.out.println( " \nThanks you are reading "+ input); } } } //buffer.close(); scanner.close(); } catch( FileNotFoundException e) { System.out.println("File not Found"); } for ( i=0; i < 5; i++ ) rentBooks[i].getBook(); //ARRAY NOT SHOWN } }

Read the article

Generating a drop down list of timezones with PHP

- by Xeoncross

Most sites need some way to show the dates on the site in the users preferred timezone. Below are two lists that I found and then one method using the built in PHP DateTime class in PHP 5. I need help knowing which of these would be the best to attempt to use when trying to get the UTC offset from the user on register. One: <option value="-12">[UTC - 12] Baker Island Time</option> <option value="-11">[UTC - 11] Niue Time, Samoa Standard Time</option> <option value="-10">[UTC - 10] Hawaii-Aleutian Standard Time, Cook Island Time</option> <option value="-9.5">[UTC - 9:30] Marquesas Islands Time</option> <option value="-9">[UTC - 9] Alaska Standard Time, Gambier Island Time</option> <option value="-8">[UTC - 8] Pacific Standard Time</option> <option value="-7">[UTC - 7] Mountain Standard Time</option> <option value="-6">[UTC - 6] Central Standard Time</option> <option value="-5">[UTC - 5] Eastern Standard Time</option> <option value="-4.5">[UTC - 4:30] Venezuelan Standard Time</option> <option value="-4">[UTC - 4] Atlantic Standard Time</option> <option value="-3.5">[UTC - 3:30] Newfoundland Standard Time</option> <option value="-3">[UTC - 3] Amazon Standard Time, Central Greenland Time</option> <option value="-2">[UTC - 2] Fernando de Noronha Time, South Georgia & the South Sandwich Islands Time</option> <option value="-1">[UTC - 1] Azores Standard Time, Cape Verde Time, Eastern Greenland Time</option> <option value="0" selected="selected">[UTC] Western European Time, Greenwich Mean Time</option> <option value="1">[UTC + 1] Central European Time, West African Time</option> <option value="2">[UTC + 2] Eastern European Time, Central African Time</option> <option value="3">[UTC + 3] Moscow Standard Time, Eastern African Time</option> <option value="3.5">[UTC + 3:30] Iran Standard Time</option> <option value="4">[UTC + 4] Gulf Standard Time, Samara Standard Time</option> <option value="4.5">[UTC + 4:30] Afghanistan Time</option> <option value="5">[UTC + 5] Pakistan Standard Time, Yekaterinburg Standard Time</option> <option value="5.5">[UTC + 5:30] Indian Standard Time, Sri Lanka Time</option> <option value="5.75">[UTC + 5:45] Nepal Time</option> <option value="6">[UTC + 6] Bangladesh Time, Bhutan Time, Novosibirsk Standard Time</option> <option value="6.5">[UTC + 6:30] Cocos Islands Time, Myanmar Time</option> <option value="7">[UTC + 7] Indochina Time, Krasnoyarsk Standard Time</option> <option value="8">[UTC + 8] Chinese Standard Time, Australian Western Standard Time, Irkutsk Standard Time</option> <option value="8.75">[UTC + 8:45] Southeastern Western Australia Standard Time</option> <option value="9">[UTC + 9] Japan Standard Time, Korea Standard Time, Chita Standard Time</option> <option value="9.5">[UTC + 9:30] Australian Central Standard Time</option> <option value="10">[UTC + 10] Australian Eastern Standard Time, Vladivostok Standard Time</option> <option value="10.5">[UTC + 10:30] Lord Howe Standard Time</option> <option value="11">[UTC + 11] Solomon Island Time, Magadan Standard Time</option> <option value="11.5">[UTC + 11:30] Norfolk Island Time</option> <option value="12">[UTC + 12] New Zealand Time, Fiji Time, Kamchatka Standard Time</option> <option value="12.75">[UTC + 12:45] Chatham Islands Time</option> <option value="13">[UTC + 13] Tonga Time, Phoenix Islands Time</option> <option value="14">[UTC + 14] Line Island Time</option> Or using PHP friendly values: <option value="Pacific/Midway">(GMT-11:00) Midway Island, Samoa</option> <option value="America/Adak">(GMT-10:00) Hawaii-Aleutian</option> <option value="Etc/GMT+10">(GMT-10:00) Hawaii</option> <option value="Pacific/Marquesas">(GMT-09:30) Marquesas Islands</option> <option value="Pacific/Gambier">(GMT-09:00) Gambier Islands</option> <option value="America/Anchorage">(GMT-09:00) Alaska</option> <option value="America/Ensenada">(GMT-08:00) Tijuana, Baja California</option> <option value="Etc/GMT+8">(GMT-08:00) Pitcairn Islands</option> <option value="America/Los_Angeles">(GMT-08:00) Pacific Time (US & Canada)</option> <option value="America/Denver">(GMT-07:00) Mountain Time (US & Canada)</option> <option value="America/Chihuahua">(GMT-07:00) Chihuahua, La Paz, Mazatlan</option> <option value="America/Dawson_Creek">(GMT-07:00) Arizona</option> <option value="America/Belize">(GMT-06:00) Saskatchewan, Central America</option> <option value="America/Cancun">(GMT-06:00) Guadalajara, Mexico City, Monterrey</option> <option value="Chile/EasterIsland">(GMT-06:00) Easter Island</option> <option value="America/Chicago">(GMT-06:00) Central Time (US & Canada)</option> <option value="America/New_York">(GMT-05:00) Eastern Time (US & Canada)</option> <option value="America/Havana">(GMT-05:00) Cuba</option> <option value="America/Bogota">(GMT-05:00) Bogota, Lima, Quito, Rio Branco</option> <option value="America/Caracas">(GMT-04:30) Caracas</option> <option value="America/Santiago">(GMT-04:00) Santiago</option> <option value="America/La_Paz">(GMT-04:00) La Paz</option> <option value="Atlantic/Stanley">(GMT-04:00) Faukland Islands</option> <option value="America/Campo_Grande">(GMT-04:00) Brazil</option> <option value="America/Goose_Bay">(GMT-04:00) Atlantic Time (Goose Bay)</option> <option value="America/Glace_Bay">(GMT-04:00) Atlantic Time (Canada)</option> <option value="America/St_Johns">(GMT-03:30) Newfoundland</option> <option value="America/Araguaina">(GMT-03:00) UTC-3</option> <option value="America/Montevideo">(GMT-03:00) Montevideo</option> <option value="America/Miquelon">(GMT-03:00) Miquelon, St. Pierre</option> <option value="America/Godthab">(GMT-03:00) Greenland</option> <option value="America/Argentina/Buenos_Aires">(GMT-03:00) Buenos Aires</option> <option value="America/Sao_Paulo">(GMT-03:00) Brasilia</option> <option value="America/Noronha">(GMT-02:00) Mid-Atlantic</option> <option value="Atlantic/Cape_Verde">(GMT-01:00) Cape Verde Is.</option> <option value="Atlantic/Azores">(GMT-01:00) Azores</option> <option value="Europe/Belfast">(GMT) Greenwich Mean Time : Belfast</option> <option value="Europe/Dublin">(GMT) Greenwich Mean Time : Dublin</option> <option value="Europe/Lisbon">(GMT) Greenwich Mean Time : Lisbon</option> <option value="Europe/London">(GMT) Greenwich Mean Time : London</option> <option value="Africa/Abidjan">(GMT) Monrovia, Reykjavik</option> <option value="Europe/Amsterdam">(GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna</option> <option value="Europe/Belgrade">(GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague</option> <option value="Europe/Brussels">(GMT+01:00) Brussels, Copenhagen, Madrid, Paris</option> <option value="Africa/Algiers">(GMT+01:00) West Central Africa</option> <option value="Africa/Windhoek">(GMT+01:00) Windhoek</option> <option value="Asia/Beirut">(GMT+02:00) Beirut</option> <option value="Africa/Cairo">(GMT+02:00) Cairo</option> <option value="Asia/Gaza">(GMT+02:00) Gaza</option> <option value="Africa/Blantyre">(GMT+02:00) Harare, Pretoria</option> <option value="Asia/Jerusalem">(GMT+02:00) Jerusalem</option> <option value="Europe/Minsk">(GMT+02:00) Minsk</option> <option value="Asia/Damascus">(GMT+02:00) Syria</option> <option value="Europe/Moscow">(GMT+03:00) Moscow, St. Petersburg, Volgograd</option> <option value="Africa/Addis_Ababa">(GMT+03:00) Nairobi</option> <option value="Asia/Tehran">(GMT+03:30) Tehran</option> <option value="Asia/Dubai">(GMT+04:00) Abu Dhabi, Muscat</option> <option value="Asia/Yerevan">(GMT+04:00) Yerevan</option> <option value="Asia/Kabul">(GMT+04:30) Kabul</option> <option value="Asia/Yekaterinburg">(GMT+05:00) Ekaterinburg</option> <option value="Asia/Tashkent">(GMT+05:00) Tashkent</option> <option value="Asia/Kolkata">(GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi</option> <option value="Asia/Katmandu">(GMT+05:45) Kathmandu</option> <option value="Asia/Dhaka">(GMT+06:00) Astana, Dhaka</option> <option value="Asia/Novosibirsk">(GMT+06:00) Novosibirsk</option> <option value="Asia/Rangoon">(GMT+06:30) Yangon (Rangoon)</option> <option value="Asia/Bangkok">(GMT+07:00) Bangkok, Hanoi, Jakarta</option> <option value="Asia/Krasnoyarsk">(GMT+07:00) Krasnoyarsk</option> <option value="Asia/Hong_Kong">(GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi</option> <option value="Asia/Irkutsk">(GMT+08:00) Irkutsk, Ulaan Bataar</option> <option value="Australia/Perth">(GMT+08:00) Perth</option> <option value="Australia/Eucla">(GMT+08:45) Eucla</option> <option value="Asia/Tokyo">(GMT+09:00) Osaka, Sapporo, Tokyo</option> <option value="Asia/Seoul">(GMT+09:00) Seoul</option> <option value="Asia/Yakutsk">(GMT+09:00) Yakutsk</option> <option value="Australia/Adelaide">(GMT+09:30) Adelaide</option> <option value="Australia/Darwin">(GMT+09:30) Darwin</option> <option value="Australia/Brisbane">(GMT+10:00) Brisbane</option> <option value="Australia/Hobart">(GMT+10:00) Hobart</option> <option value="Asia/Vladivostok">(GMT+10:00) Vladivostok</option> <option value="Australia/Lord_Howe">(GMT+10:30) Lord Howe Island</option> <option value="Etc/GMT-11">(GMT+11:00) Solomon Is., New Caledonia</option> <option value="Asia/Magadan">(GMT+11:00) Magadan</option> <option value="Pacific/Norfolk">(GMT+11:30) Norfolk Island</option> <option value="Asia/Anadyr">(GMT+12:00) Anadyr, Kamchatka</option> <option value="Pacific/Auckland">(GMT+12:00) Auckland, Wellington</option> <option value="Etc/GMT-12">(GMT+12:00) Fiji, Kamchatka, Marshall Is.</option> <option value="Pacific/Chatham">(GMT+12:45) Chatham Islands</option> <option value="Pacific/Tongatapu">(GMT+13:00) Nuku'alofa</option> <option value="Pacific/Kiritimati">(GMT+14:00) Kiritimati</option> Or just using PHP it's self $timezones = DateTimeZone::listAbbreviations(); $cities = array(); foreach( $timezones as $key => $zones ) { foreach( $zones as $id => $zone ) { /** * Only get timezones explicitely not part of "Others". * @see http://www.php.net/manual/en/timezones.others.php */ if ( preg_match( '/^(America|Antartica|Arctic|Asia|Atlantic|Europe|Indian|Pacific)\//', $zone['timezone_id'] ) && $zone['timezone_id']) { $cities[$zone['timezone_id']][] = $key; } } } // For each city, have a comma separated list of all possible timezones for that city. foreach( $cities as $key => $value ) $cities[$key] = join( ', ', $value); // Only keep one city (the first and also most important) for each set of possibilities. $cities = array_unique( $cities ); // Sort by area/city name. ksort( $cities ); It seems like the last one would be the safest as it would grow with the PHP release being used. You could also flip that array around when needed to tie timezones to city names.

Read the article

Get data from MySQL to Android application

- by Mona

I want to get data from MySQL database using PHP and display it in Android activity. I code it and pass JSON Array but there is a problem i dont know how to connect to server and my all database is on local server. I code it Kindly tell me where i go wrong so I can get exact results. I'll be very thankful to you. My PHP code is: <?php $response = array(); require_once __DIR__ . '/db_connect.php'; $db = new DB_CONNECT(); if (isset($_GET["cid"])) { $cid = $_GET['cid']; // get a product from products table $result = mysql_query("SELECT *FROM my_task WHERE cid = $cid"); if (!empty($result)) { // check for empty result if (mysql_num_rows($result) > 0) { $result = mysql_fetch_array($result); $task = array(); $task["cid"] = $result["cid"]; $task["cus_name"] = $result["cus_name"]; $task["contact_number"] = $result["contact_number"]; $task["ticket_no"] = $result["ticket_no"]; $task["task_detail"] = $result["task_detail"]; // success $response["success"] = 1; // user node $response["task"] = array(); array_push($response["my_task"], $task); // echoing JSON response echo json_encode($response); } else { // no task found $response["success"] = 0; $response["message"] = "No product found"; // echo no users JSON echo json_encode($response); } } else { // no task found $response["success"] = 0; $response["message"] = "No product found"; echo json_encode($response); } } else { $response["success"] = 0; $response["message"] = "Required field(s) is missing"; // echoing JSON response echo json_encode($response);} ?> My Android code is: public class My_Task extends Activity { TextView cus_name_txt, contact_no_txt, ticket_no_txt, task_detail_txt; EditText attend_by_txtbx, cus_name_txtbx, contact_no_txtbx, ticket_no_txtbx, task_detail_txtbx; Button btnSave; Button btnDelete; String cid; // Progress Dialog private ProgressDialog tDialog; // Creating JSON Parser object JSONParser jParser = new JSONParser(); ArrayList<HashMap<String, String>> my_taskList; // single task url private static final String url_read_mytask = "http://198.168.0.29/mobile/read_My_Task.php"; // url to update product private static final String url_update_mytask = "http://198.168.0.29/mobile/update_mytask.php"; // url to delete product private static final String url_delete_mytask = "http://198.168.0.29/mobile/delete_mytask.php"; // JSON Node names private static String TAG_SUCCESS = "success"; private static String TAG_MYTASK = "my_task"; private static String TAG_CID = "cid"; private static String TAG_NAME = "cus_name"; private static String TAG_CONTACT = "contact_number"; private static String TAG_TICKET = "ticket_no"; private static String TAG_TASKDETAIL = "task_detail"; private static String attend_by_txt; // task JSONArray JSONArray my_task = null; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.my_task); cus_name_txt = (TextView) findViewById(R.id.cus_name_txt); contact_no_txt = (TextView)findViewById(R.id.contact_no_txt); ticket_no_txt = (TextView)findViewById(R.id.ticket_no_txt); task_detail_txt = (TextView)findViewById(R.id.task_detail_txt); attend_by_txtbx = (EditText)findViewById(R.id.attend_by_txt); attend_by_txtbx.setText(My_Task.attend_by_txt); Spinner severity = (Spinner) findViewById(R.id.severity_spinner); // Create an ArrayAdapter using the string array and a default spinner layout ArrayAdapter<CharSequence> adapter3 = ArrayAdapter.createFromResource(this, R.array.Severity_array, android.R.layout.simple_dropdown_item_1line); // Specify the layout to use when the list of choices appears adapter3.setDropDownViewResource(android.R.layout.simple_spinner_dropdown_item); // Apply the adapter to the spinner severity.setAdapter(adapter3); // save button btnSave = (Button) findViewById(R.id.btnSave); btnDelete = (Button) findViewById(R.id.btnDelete); // getting product details from intent Intent i = getIntent(); // getting product id (pid) from intent cid = i.getStringExtra(TAG_CID); // Getting complete product details in background thread new GetProductDetails().execute(); // save button click event btnSave.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View arg0) { // starting background task to update product new SaveProductDetails().execute(); } }); // Delete button click event btnDelete.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View arg0) { // deleting product in background thread new DeleteProduct().execute(); } }); } /** * Background Async Task to Get complete product details * */ class GetProductDetails extends AsyncTask<String, String, String> { /** * Before starting background thread Show Progress Dialog * */ @Override protected void onPreExecute() { super.onPreExecute(); tDialog = new ProgressDialog(My_Task.this); tDialog.setMessage("Loading task details. Please wait..."); tDialog.setIndeterminate(false); tDialog.setCancelable(true); tDialog.show(); } /** * Getting product details in background thread * */ protected String doInBackground(String... params) { // updating UI from Background Thread runOnUiThread(new Runnable() { public void run() { // Check for success tag int success; try { // Building Parameters List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair("cid", cid)); // getting product details by making HTTP request // Note that product details url will use GET request JSONObject json = JSONParser.makeHttpRequest( url_read_mytask, "GET", params); // check your log for json response Log.d("Single Task Details", json.toString()); // json success tag success = json.getInt(TAG_SUCCESS); if (success == 1) { // successfully received product details JSONArray my_taskObj = json .getJSONArray(TAG_MYTASK); // JSON Array // get first product object from JSON Array JSONObject my_task = my_taskObj.getJSONObject(0); // task with this cid found // Edit Text // display task data in EditText cus_name_txtbx = (EditText) findViewById(R.id.cus_name_txt); cus_name_txtbx.setText(my_task.getString(TAG_NAME)); contact_no_txtbx = (EditText) findViewById(R.id.contact_no_txt); contact_no_txtbx.setText(my_task.getString(TAG_CONTACT)); ticket_no_txtbx = (EditText) findViewById(R.id.ticket_no_txt); ticket_no_txtbx.setText(my_task.getString(TAG_TICKET)); task_detail_txtbx = (EditText) findViewById(R.id.task_detail_txt); task_detail_txtbx.setText(my_task.getString(TAG_TASKDETAIL)); } else { // task with cid not found } } catch (JSONException e) { e.printStackTrace(); } } }); return null; } /** * After completing background task Dismiss the progress dialog * **/ protected void onPostExecute(String file_url) { // dismiss the dialog once got all details tDialog.dismiss(); } } /** * Background Async Task to Save product Details * */ class SaveProductDetails extends AsyncTask<String, String, String> { /** * Before starting background thread Show Progress Dialog * */ @Override protected void onPreExecute() { super.onPreExecute(); tDialog = new ProgressDialog(My_Task.this); tDialog.setMessage("Saving task ..."); tDialog.setIndeterminate(false); tDialog.setCancelable(true); tDialog.show(); } /** * Saving product * */ protected String doInBackground(String... args) { // getting updated data from EditTexts String cus_name = cus_name_txt.getText().toString(); String contact_no = contact_no_txt.getText().toString(); String ticket_no = ticket_no_txt.getText().toString(); String task_detail = task_detail_txt.getText().toString(); // Building Parameters List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair(TAG_CID, cid)); params.add(new BasicNameValuePair(TAG_NAME, cus_name)); params.add(new BasicNameValuePair(TAG_CONTACT, contact_no)); params.add(new BasicNameValuePair(TAG_TICKET, ticket_no)); params.add(new BasicNameValuePair(TAG_TASKDETAIL, task_detail)); // sending modified data through http request // Notice that update product url accepts POST method JSONObject json = JSONParser.makeHttpRequest(url_update_mytask, "POST", params); // check json success tag try { int success = json.getInt(TAG_SUCCESS); if (success == 1) { // successfully updated Intent i = getIntent(); // send result code 100 to notify about product update setResult(100, i); finish(); } else { // failed to update product } } catch (JSONException e) { e.printStackTrace(); } return null; } /** * After completing background task Dismiss the progress dialog * **/ protected void onPostExecute(String file_url) { // dismiss the dialog once product uupdated tDialog.dismiss(); } } /***************************************************************** * Background Async Task to Delete Product * */ class DeleteProduct extends AsyncTask<String, String, String> { /** * Before starting background thread Show Progress Dialog * */ @Override protected void onPreExecute() { super.onPreExecute(); tDialog = new ProgressDialog(My_Task.this); tDialog.setMessage("Deleting Product..."); tDialog.setIndeterminate(false); tDialog.setCancelable(true); tDialog.show(); } /** * Deleting product * */ protected String doInBackground(String... args) { // Check for success tag int success; try { // Building Parameters List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair("cid", cid)); // getting product details by making HTTP request JSONObject json = JSONParser.makeHttpRequest( url_delete_mytask, "POST", params); // check your log for json response Log.d("Delete Task", json.toString()); // json success tag success = json.getInt(TAG_SUCCESS); if (success == 1) { // product successfully deleted // notify previous activity by sending code 100 Intent i = getIntent(); // send result code 100 to notify about product deletion setResult(100, i); finish(); } } catch (JSONException e) { e.printStackTrace(); } return null; } /** * After completing background task Dismiss the progress dialog * **/ protected void onPostExecute(String file_url) { // dismiss the dialog once product deleted tDialog.dismiss(); } } public void onItemSelected(AdapterView<?> parent, View view, int pos, long id) { // An item was selected. You can retrieve the selected item using // parent.getItemAtPosition(pos) } public void onNothingSelected(AdapterView<?> parent) { // Another interface callback } } My JSONParser code is: public class JSONParser { static InputStream is = null; static JSONObject jObj = null; static String json = ""; // constructor public JSONParser() { } // function get json from url // by making HTTP POST or GET mehtod public static JSONObject makeHttpRequest(String url, String method, List<NameValuePair> params) { // Making HTTP request try { // check for request method if(method == "POST"){ // request method is POST // defaultHttpClient DefaultHttpClient httpClient = new DefaultHttpClient(); HttpPost httpPost = new HttpPost(url); httpPost.setEntity(new UrlEncodedFormEntity(params)); HttpResponse httpResponse = httpClient.execute(httpPost); HttpEntity httpEntity = httpResponse.getEntity(); is = httpEntity.getContent(); }else if(method == "GET"){ // request method is GET DefaultHttpClient httpClient = new DefaultHttpClient(); String paramString = URLEncodedUtils.format(params, "utf-8"); url += "?" + paramString; HttpGet httpGet = new HttpGet(url); HttpResponse httpResponse = httpClient.execute(httpGet); HttpEntity httpEntity = httpResponse.getEntity(); is = httpEntity.getContent(); } } catch (UnsupportedEncodingException e) { e.printStackTrace(); } catch (ClientProtocolException e) { e.printStackTrace(); } catch (IOException e) { e.printStackTrace(); } try { BufferedReader reader = new BufferedReader(new InputStreamReader( is, "iso-8859-1"), 8); StringBuilder sb = new StringBuilder(); String line = null; while ((line = reader.readLine()) != null) { sb.append(line + "\n"); } is.close(); json = sb.toString(); } catch (Exception e) { Log.e("Buffer Error", "Error converting result " + e.toString()); } // try parse the string to a JSON object try { jObj = new JSONObject(json); } catch (JSONException e) { Log.e("JSON Parser", "Error parsing data " + e.toString()); } // return JSON String return jObj; my all database is in localhost and it is not opening an activity. displays an error "Stopped unexpectedly":( How can i get exact results. Kindly guide me

Search Results

Search found 7466 results on 299 pages for 'selected'.

Page 267/299 | < Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274 | Next Page >

- by APNW

- by Eric Bezille

- by Michael Freidgeim

- by zewone

- by Geertjan

- by David Paquette

- by PointsToShare

- by mbcrump

- by Sylvie MacKenzie, PMP

- by Frank Nimphius

- by Samantha.Y. Ma

- by Bikonja

- by Maria Sandu

- by jpurdy

- by Ibuntu

- by Bertrand Matthelié

- by Holger

- by Steve Felts

- by Geertjan

- by user3529643

- by Orin MacGregor

- by Fat Bloke

- by Sundi

- by Xeoncross

- by Mona

< Previous Page | 263 264 265 266 267 268 269 270 271 272 273 274 | Next Page >