Search Results

Search found 25519 results on 1021 pages for 'virtual machine'.

Page 268/1021 | < Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >

• Run script on login with ssh

  - by user912447

  I have a feeling this is quite easy to do but every solution found on google has to do with adding a script to be run whenever someone logs into the machine. What I am looking for is a way to run a script when only I log into the machine. I ssh into a shared computer and need to have it load a couple modules for me and I imagined the easiest way to do this would to just run a script on login. Is there a simple way?

  Read the article

• Are there any OpenGL implementations which can use a server to do the rendering?

  - by user1973386

  Assume I have 2 independent machines, one running Debian sid, and the other running Windows 7. The one running Debian sid has a decent graphics card, the Windows 7 machine has no graphics card and a weak processor. The two are connected over a fast local network. Are there any OpenGL implementations, where Windows 7 would use the Debian machine's graphics card to do OpenGL rendering "over the network"?

  Read the article

• How to establish a remote desktop connection from windows 7 to mac os leopard?

  - by EEE

  I try to make a remote desktop connection from my win 7 machine to my mac os leopard machine. How can I accomplish that? Thanks

  Read the article

• websites painfully slow sometimes

  - by travolto

  i have a 1and1 account dedicated linux machine never had a problem with it. httpd and mysqld seem to be running just fine. ping and trace are also fine.. one domain on the machine is www.hundig.com any ideas where i could look why it is so slow or not loading at all? when i reboot it seems faster. just rebooting httpd doesnt change anything.

  Read the article

• What is the best tool to aggregate traffic stats from multiple nginx servers?

  - by gekkz

  The setup: 2 or more nginx machines each machine has the same virtual hosts traffic is load balanced via DNS to each machine I need to figure out what are the best tools to use to get some traffic stats, mostly interested in amount of hits and total traffic in gigabytes. Obviously, the log information will come from nginx, formatted like this: log_format main '$remote_addr $host $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" "$http_user_agent" "$gzip_ratio"';

  Read the article

• I cannot setup Ubuntu inside Windows 7 on my netbook

  - by user1728931

  I have setup Ubuntu into another computer before. I am making a bootable USB with Universal-USB-Installer-1.9.1.1 to setup. When machine asks me how I want to install Ubuntu on my computer (install Ubuntu inside windows 7, replace windows 7 with Ubuntu, something else) I chose inside windows 7 and clicked continue then here is the trouble machine restart itself every time. It is not suppose to restart.

  Read the article

• There are currently no logon servers available

  - by linganna

  we are using free-ipaserver(192.168.0.200) on fedora, clients are windows xp. we are successfully added two xp clients(m01(192.168.0.60, m02(192.168.0.61) on test environment. and also our server name is ipaserver & domain name is xyz.com , samba has been configured working fine. problem is whenever we access from one xp machine another xp machine we are getting this error, There are currently no logon servers available to service the logon request, please give the solutions.

  Read the article

• Can I transfer a Win7 upgrade if the upgraded OS was retail? [closed]

  - by foocode

  Possible Duplicate: Windows 7 and Vista Activation FAQ: How do language, version, 64-bit or 32-bit, and source affect ability to install and transfer Windows licenses? I have new system components on the way which equate to a new computer. My current machine config is running Windows 7 Pro Upgrade which I installed on top of Vista Ultimate (retail - not OEM). Can I install the Windows 7 Pro on the new computer? Would this equate to transferring the original OS (Vista) license to the new machine?

  Read the article

• Where are stickies ( Sticky Notes) stored on mac 10.9.3?

  - by user332203

  i deleted an important note on stickies. And i retrieved an old version of it in time machine under preferences / widgets. but the setup appears to have changed in my upgrade to mavericks and I can't open the note. I'm trying to open a "post-mavericks" version in my time machine and I can't find where it is. i saw a post that said look under Library/Preferences/Container, i have no such folder or binary document. Please help.

  Read the article

• How Do I 'git fetch' and 'git merge' from a Remote Tracking Branch (like 'git pull')

  - by kaybenleroll

  I have set up some remote tracking branches in git, but I never seem to be able to merge them into the local branch once I have updated them with 'git fetch'. For example, suppose I have remote branch called 'an-other-branch'. I set that up locally as a tracking branch using git branch --track an-other-branch origin/an-other-branch So far, so good. But if that branch gets updated (usually by me moving machine and commiting from that machine), and I want to update it on the original machine, I'm running into trouble with fetch/merge: git fetch origin an-other-branch git merge origin/an-other-branch Whenever I do this, I get an 'Already up-to-date' message and nothing merges. However, a git pull origin an-other-branch always updates it like you would expect. Also, running git diff git diff origin/an-other-branch shows that there are differences, so I think I have my syntax wrong. What am I doing wrong?

  Read the article

• VMware Converter errors when creating Boot Camp VM

  - by Ryan Giglio

  I just got a new computer. My old computer had a Boot Camp installation of Windows 7, with VMWare running the Boot Camp installation in a virtual machine. On my new computer, I want Windows to strictly be a VM, so I downloaded the VMWare Converter software to create a virtual machine out of the Boot Camp partition. After finishing 95% of the converting process, I get a few messages Warning: Failed while updating boot.ini on the target machine's system volume. Warning: Failed while updating drive letters for the target volume layout. Error: Reconfiguration failed. And then it fails with FAILED: Unable to find the system volume, reconfiguration is not possible. I'm not sure what the problem is or how to fix it...I don't know much about virtualization or dual booting other than the simple instructions on how to set it up the first time.

  Read the article

• Problems with Castle DynamicProxy2 on .Net 3.5 SP1 on Win2003 Server

  - by Andrea Balducci

  I've an mvc + nh asp.net application. On my dev machine (win 7 Ent) all works fine, if deployed on a Win 2k3 (tried 2 different vm and one phisical machine) I got the following error.. anyone can help? Cannot explain this issue (tried the same build, so i think it'a machine configuration issue).. Derived method 'set_ID' in type 'CustomerProxy75950979a2a048e889584c21696f7f1b' from assembly 'DynamicProxyGenAssembly2, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' cannot reduce access [TypeLoadException: Derived method 'set_ID' in type 'CustomerProxy75950979a2a048e889584c21696f7f1b' from assembly 'DynamicProxyGenAssembly2, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' cannot reduce access.] System.Reflection.Emit.TypeBuilder._TermCreateClass(Int32 handle, Module module) +0 System.Reflection.Emit.TypeBuilder.CreateTypeNoLock() +915 System.Reflection.Emit.TypeBuilder.CreateType() +108 Castle.DynamicProxy.Generators.Emitters.AbstractTypeEmitter.BuildType() +48 Castle.DynamicProxy.Generators.ClassProxyGenerator.GenerateCode(Type[] interfaces, ProxyGenerationOptions options) +3821 Castle.DynamicProxy.DefaultProxyBuilder.CreateClassProxy(Type classToProxy, Type[] additionalInterfacesToProxy, ProxyGenerationOptions options) +84 Castle.DynamicProxy.ProxyGenerator.CreateClassProxy(Type classToProxy, Type[] additionalInterfacesToProxy, ProxyGenerationOptions options, Object[] constructorArguments, IInterceptor[] interceptors) +92 Castle.DynamicProxy.ProxyGenerator.CreateClassProxy(Type classToProxy, Type[] additionalInterfacesToProxy, IInterceptor[] interceptors) +21 NHibernate.ByteCode.Castle.ProxyFactory.GetProxy(Object id, ISessionImplementor session) +283

  Read the article

• LightDM will not start after stopping it

  - by Sweeters

  I am running Ubuntu 11.10 "Oneiric Ocelot", and in trying to install the nvidia CUDA developer drivers I switched to a virtual terminal (Ctrl-Alt-F5) and stopped lightdm (installation required that no X server instance be running) through sudo service lightdm stop. Re-starting lightdm with sudo service lightdm start did not work: A couple of * Starting [...] lines where displayed, but the process hanged. (I do not remember at which point, but I think it was * Starting System V runlevel compatibility. I manually rebooted my laptop, and ever since booting seems to hang, usually around the * Starting anac(h)ronistic cron [OK] log line (not consistently at that point, though). From that point on, I seem to be able to interact with my system only through a tty session (Ctrl-Alt-F1). I've tried purging and reinstalling both lightdm and gdm, as well as selecting both as the default display managers (through sudo dpkg-reconfigure [lightdm / gdm] or by manually editing /etc/X11/default-display-manager) through both apt-get and aptitude (that shouldn't make a difference anyway) after updating the packages, but the problem persists. Some of the responses I'm getting are the following: After running sudo dpkg-reconfigure lightdm (but not ... gdm) I get the following message: dpkg-maintscript-helper:warning: environment variable DPKG_MATINSCRIPT_NAME missing dpkg-maintscript-helper:warning: environment variable DPKG_MATINSCRIPT_PACKAGE missing After trying sudo service lightdm start or sudo start lightdm I get to see the boot loading screen again but nothing changes. If I go back to the tty shell I see lightdm start/running, process <num> but ps -e | grep lightdm gives no output. After trying sudo service gdm start or sudo starg gdm I get the gdm start/running, process <num> message, and gdm-binary is supposedly an active process, but all that happens is that the screen blinks a couple of times and nothing else. Other candidate solutions that I'd found on the web included running startx but when I try that I get an error output [...] Fatal server error: no screens found [...]. Moreover, I made sure that lightdm-gtk-greeter is installed but that did not help either. Please excuse my not including complete outputs/logs; I am writing this post from another computer and it's hard to manually copy the complete logs. Also, I've seen several posts that had to do with similar problems, but either there was no fix, or the one suggested did not work for me. In closing: Please help! I very much hope to avoid re-installing Ubuntu from scratch! :) Alex @mosi I did not manage to fix the NVIDIA kernel driver as per your instructions. I should perhaps mention that I'm on a Dell XPS15 laptop with an NVIDIA Optimus graphics card, and that I have bumblebee installed (which installs nvidia drivers during its installation, I believe). Issuing the mentioned commands I get the following: ~$uname -r 3.0.0-12-generic ~$lsmod | grep -i nvidia nvidia 11713772 0 ~$dmesg | grep -i nvidia [ 8.980041] nvidia: module license 'NVIDIA' taints kernel. [ 9.354860] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.354864] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.354868] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 9.354873] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.354879] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.355052] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011 Also, running aptitude search nvidia gives me the following: p nvidia-173 - NVIDIA binary Xorg driver, kernel module a p nvidia-173-dev - NVIDIA binary Xorg driver development file p nvidia-173-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-173-updates-dev - NVIDIA binary Xorg driver development file p nvidia-96 - NVIDIA binary Xorg driver, kernel module a p nvidia-96-dev - NVIDIA binary Xorg driver development file p nvidia-96-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-96-updates-dev - NVIDIA binary Xorg driver development file p nvidia-cg-toolkit - Cg Toolkit - GPU Shader Authoring Language p nvidia-common - Find obsolete NVIDIA drivers i nvidia-current - NVIDIA binary Xorg driver, kernel module a p nvidia-current-dev - NVIDIA binary Xorg driver development file c nvidia-current-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-current-updates-dev - NVIDIA binary Xorg driver development file i nvidia-settings - Tool of configuring the NVIDIA graphics dr p nvidia-settings-updates - Tool of configuring the NVIDIA graphics dr v nvidia-va-driver - v nvidia-va-driver - I've tried manually installing (sudo aptitude install <package>) packages nvidia-common and nvidia-settings-updates but to no avail. For example, sudo aptitude install nvidia-settings-updates returns the following log: Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 83 not upgraded. Need to get 0 B of archives. After unpacking 0 B will be used. Writing extended state information... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... The same happens with the Linux headers (i.e. I cannot seem to be able to install linux-headers-3.0.0-12-generic). The output of aptitude search linux-headers is as follows: v linux-headers - v linux-headers - v linux-headers-2.6 - i linux-headers-2.6.38-11 - Header files related to Linux kernel versi i linux-headers-2.6.38-11-generic - Linux kernel headers for version 2.6.38 on i A linux-headers-2.6.38-8 - Header files related to Linux kernel versi i A linux-headers-2.6.38-8-generic - Linux kernel headers for version 2.6.38 on v linux-headers-3 - v linux-headers-3.0 - v linux-headers-3.0 - i A linux-headers-3.0.0-12 - Header files related to Linux kernel versi p linux-headers-3.0.0-12-generic - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-generic- - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-server - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-virtual - Linux kernel headers for version 3.0.0 on p linux-headers-generic - Generic Linux kernel headers p linux-headers-generic-pae - Generic Linux kernel headers v linux-headers-lbm - v linux-headers-lbm - v linux-headers-lbm-2.6 - v linux-headers-lbm-2.6 - p linux-headers-lbm-3.0.0-12-gene - Header files related to linux-backports-mo p linux-headers-lbm-3.0.0-12-gene - Header files related to linux-backports-mo p linux-headers-lbm-3.0.0-12-serv - Header files related to linux-backports-mo p linux-headers-server - Linux kernel headers on Server Equipment. p linux-headers-virtual - Linux kernel headers for virtual machines @heartsmagic I did try purging and reinstalling any nvidia driver packages, but it did not seem to make a difference, My xorg.conf file contains the following: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 280.13 ([email protected]) Wed Jul 27 17:15:58 PDT 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Get domain user from IPAddress or Hostname in .Net

  - by Duracell

  We're trying to implement a custom solution for Growl for Windows. We tell the Growl client to subscribe to notifications from our server. The server then gets a message from the client via the GNTP (Growl messaging protocol). We require the name of the user logged into the client machine in order to do database lookups. The GNTP does not provide this information. So, we have a connected client socket (and thus, IP address) and a message from this client containing its machine name. Is there any possible way to determine the username of the user who is logged into the specified machine? We have access to windows domain services.

  Read the article

• Problem restoring a SQL Server backup

  - by Elmex

  I have a SQL Server 2008, which is part of a domain. Now I make a backup of a database of this server and restore it on a SQL Server, which is not part of a domain. I have an C# application, which uses this database. On the NON-Domain machine I get now exceptions like this: "Cannot execute as the database prinzipal because the principial "dbo" does not exist, this type of principal cannot be impersonatedm or you don not have the permission" I think, the problem is, that the database owner is a domain user and this user doesn't exist on the target machine (backup machine)!? How can I solve this ?

  Read the article

• Networking in VirtualBox

  - by Fat Bloke

  Networking in VirtualBox is extremely powerful, but can also be a bit daunting, so here's a quick overview of the different ways you can setup networking in VirtualBox, with a few pointers as to which configurations should be used and when. VirtualBox allows you to configure up to 8 virtual NICs (Network Interface Controllers) for each guest vm (although only 4 are exposed in the GUI) and for each of these NICs you can configure: Which virtualized NIC-type is exposed to the Guest. Examples include: Intel PRO/1000 MT Server (82545EM),  AMD PCNet FAST III (Am79C973, the default) or  a Paravirtualized network adapter (virtio-net). How the NIC operates with respect to your Host's physical networking. The main modes are: Network Address Translation (NAT) Bridged networking Internal networking Host-only networking NAT with Port-forwarding The choice of NIC-type comes down to whether the guest has drivers for that NIC.  VirtualBox, suggests a NIC based on the guest OS-type that you specify during creation of the vm, and you rarely need to modify this. But the choice of networking mode depends on how you want to use your vm (client or server) and whether you want other machines on your network to see it. So let's look at each mode in a bit more detail... Network Address Translation (NAT) This is the default mode for new vm's and works great in most situations when the Guest is a "client" type of vm. (i.e. most network connections are outbound). Here's how it works: When the guest OS boots,  it typically uses DHCP to get an IP address. VirtualBox will field this DHCP request and tell the guest OS its assigned IP address and the gateway address for routing outbound connections. In this mode, every vm is assigned the same IP address (10.0.2.15) because each vm thinks they are on their own isolated network. And when they send their traffic via the gateway (10.0.2.2) VirtualBox rewrites the packets to make them appear as though they originated from the Host, rather than the Guest (running inside the Host). This means that the Guest will work even as the Host moves from network to network (e.g. laptop moving between locations), and from wireless to wired connections too. However, how does another computer initiate a connection into a Guest?  e.g. connecting to a web server running in the Guest. This is not (normally) possible using NAT mode as there is no route into the Guest OS. So for vm's running servers we need a different networking mode.... Bridged Networking Bridged Networking is used when you want your vm to be a full network citizen, i.e. to be an equal to your host machine on the network. In this mode, a virtual NIC is "bridged" to a physical NIC on your host, like this: The effect of this is that each VM has access to the physical network in the same way as your host. It can access any service on the network such as external DHCP services, name lookup services, and routing information just as the host does. Logically, the network looks like this: The downside of this mode is that if you run many vm's you can quickly run out of IP addresses or your network administrator gets fed up with you asking for statically assigned IP addresses. Secondly, if your host has multiple physical NICs (e.g. Wireless and Wired) you must reconfigure the bridge when your host jumps networks.  Hmm, so what if you want to run servers in vm's but don't want to involve your network administrator? Maybe one of the next 2 modes is for you... Internal Networking When you configure one or more vm's to sit on an Internal network, VirtualBox ensures that all traffic on that network stays within the host and is only visible to vm's on that virtual network. Configuration looks like this: The internal network ( in this example "intnet" ) is a totally isolated network and so is very "quiet". This is good for testing when you need a separate, clean network, and you can create sophisticated internal networks with vm's that provide their own services to the internal network. (e.g. Active Directory, DHCP, etc). Note that not even the Host is a member of the internal network, but this mode allows vm's to function even when the Host is not connected to a network (e.g. on a plane). Note that in this mode, VirtualBox provides no "convenience" services such as DHCP, so your machines must be statically configured or one of the vm's needs to provide a DHCP/Name service. Multiple internal networks are possible and you can configure vm's to have multiple NICs to sit across internal and other network modes and thereby provide routes if needed. But all this sounds tricky. What if you want an Internal Network that the host participates on with VirtualBox providing IP addresses to the Guests? Ah, then for this, you might want to consider Host-only Networking... Host-only Networking Host-only Networking is like Internal Networking in that you indicate which network the Guest sits on, in this case, "vboxnet0": All vm's sitting on this "vboxnet0" network will see each other, and additionally, the host can see these vm's too. However, other external machines cannot see Guests on this network, hence the name "Host-only". Logically, the network looks like this: This looks very similar to Internal Networking but the host is now on "vboxnet0" and can provide DHCP services. To configure how a Host-only network behaves, look in the VirtualBox Manager...Preferences...Network dialog: Port-Forwarding with NAT Networking Now you may think that we've provided enough modes here to handle every eventuality but here's just one more... What if you cart around a mobile-demo or dev environment on, say, a laptop and you have one or more vm's that you need other machines to connect into? And you are continually hopping onto different (customer?) networks. In this scenario: NAT - won't work because external machines need to connect in. Bridged - possibly an option, but does your customer want you eating IP addresses and can your software cope with changing networks? Internal - we need the vm(s) to be visible on the network, so this is no good. Host-only - same problem as above, we want external machines to connect in to the vm's. Enter Port-forwarding to save the day! Configure your vm's to use NAT networking; Add Port Forwarding rules; External machines connect to "host":"port number" and connections are forwarded by VirtualBox to the guest:port number specified. For example, if your vm runs a web server on port 80, you could set up rules like this:  ...which reads: "any connections on port 8080 on the Host will be forwarded onto this vm's port 80".  This provides a mobile demo system which won't need re-configuring every time you open your laptop lid. Summary VirtualBox has a very powerful set of options allowing you to set up almost any configuration your heart desires. For more information, check out the VirtualBox User Manual on Virtual Networking. -FB 

  Read the article

• cannot connect with huawei e173 after upgrade to 12.10 using network manager

  - by user104195

  Since upgrade from 12.04 to 12.10 I can't connect to internet using mobile broadband modem Huawei e173. It worked earlier without problems and now it seems to be properly recognized (at least its connections appear in network manager applet), and after selecting connection manually it starts connection procedure. After about 20 seconds it returns to state disconnected. After browsing internet I've found that running network manager with: NM_PPP_DEBUG=1 /usr/sbin/NetworkManager --no-daemon After inserting modem I get: NetworkManager[507]: <warn> (ttyUSB2): failed to look up interface index NetworkManager[507]: <info> (ttyUSB2): new GSM/UMTS device (driver: 'option1' ifindex: 0) NetworkManager[507]: <info> (ttyUSB2): exported as /org/freedesktop/NetworkManager/Devices/2 NetworkManager[507]: <info> (ttyUSB2): now managed NetworkManager[507]: <info> (ttyUSB2): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] NetworkManager[507]: <info> (ttyUSB2): deactivating device (reason 'managed') [2] NetworkManager[507]: <info> (ttyUSB2): device state change: unavailable -> disconnected (reason 'none') [20 30 0] where 'failed to look up interface index' seems to be suspicious. After starting connecting: NetworkManager[507]: <info> Activation (ttyUSB2) starting connection 'Plus - Dostep standardowy' NetworkManager[507]: <info> (ttyUSB2): device state change: disconnected -> prepare (reason 'none') [30 40 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started... NetworkManager[507]: <info> (ttyUSB2): device state change: prepare -> need-auth (reason 'none') [40 60 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started... NetworkManager[507]: <info> (ttyUSB2): device state change: need-auth -> prepare (reason 'none') [60 40 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete. NetworkManager[507]: <info> WWAN now enabled by management service NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) starting... NetworkManager[507]: <info> (ttyUSB2): device state change: prepare -> config (reason 'none') [40 50 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) successful. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) scheduled. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) started... NetworkManager[507]: <info> (ttyUSB2): device state change: config -> ip-config (reason 'none') [50 70 0] NetworkManager[507]: <info> starting PPP connection NetworkManager[507]: <info> pppd started with pid 663 NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) started... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded. ** Message: nm-ppp-plugin: (plugin_init): initializing ** Message: nm-ppp-plugin: (nm_phasechange): status 3 / phase 'serial connection' Removed stale lock on ttyUSB2 (pid 32146) using channel 23 NetworkManager[507]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) NetworkManager[507]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. NetworkManager[507]: <warn> /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring... Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB2 ** Message: nm-ppp-plugin: (nm_phasechange): status 5 / phase 'establish' sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] NetworkManager[507]: <warn> pppd timed out or didn't initialize our dbus module NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) started... NetworkManager[507]: <info> (ttyUSB2): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5] NetworkManager[507]: <warn> Activation (ttyUSB2) failed for connection 'Plus - Dostep standardowy' NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) complete. NetworkManager[507]: <info> (ttyUSB2): device state change: failed -> disconnected (reason 'none') [120 30 0] NetworkManager[507]: <info> (ttyUSB2): deactivating device (reason 'none') [0] Terminating on signal 15 ** Message: nm-ppp-plugin: (nm_phasechange): status 10 / phase 'terminate' sent [LCP TermReq id=0x2 "User request"] NetworkManager[507]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) where repeated: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] last for about 20 seconds. I've tried to downgrade network manager but failed due to many dependencies. Can anyone point me to solution or tell what should I do to further investigate the problem?

  Read the article

• VS2008 Setup Project for C# Project

  - by xopht

  I've built app using wmp.dll which is Windows System File in my XP machine. If I tried add outputs of above project to my Setup Project, VS warned that ''wmp.dll' should be excluded because its source file 'C:\WINDOWS\system32\wmp.dll' is under Windows System File Protection'. There're three things under 'Detected Dependencies' folder. Microsoft .NET Framework, Interop.WMPLib.dll and wmp.dll. The app works okay in my machine, of course. But if I install this into Windows Server 2003 machine, the app does not be launched. I think this is because different version of OS use different version of wmp.dll. Anyway, how can I fix this? ps. I've even excluded wmp.dll from the Setup Project.

  Read the article

• Linq-to-sql Compiled Query is caching result from disposed DataContext

  - by Vladimir Kojic

  Compiled query: public static Func<OperationalDataContext, short, Machine> QueryMachineById = CompiledQuery.Compile((OperationalDataContext db, short machineID) => db.Machines.Where(m => m.MachineID == machineID).SingleOrDefault()); It looks like compiled query is caching Machine object and returning the same object even if query is called from new DataContext (I’m disposing DataContext in the service but I’m getting Machine from previous DataContext). I use POCOs and XML mapping. Getting cached object from the same datacontext is ok, but when I call query with new DataContext I don’t want to get object from old datacontext. Is there something that I don’t do right ? Thanks, Vladimir

  Read the article

• Silverlight WCF service acting strange

  - by Caleb Sandfort

  Hi I have a silverlight project that calls into a wcf service. Everything works fine on my local machine. However when I deploy to a virtual machine, with the exact same query the wcf service returns, but the result is empty. I've tried debugging, but have not been able to get it to break in the wcf service. Any ideas what the problem could be, or how I could go about debugging it? Thanks I figured out what the problem is, but am not sure what the solution is. In my silverlight project the wcf service I am referencing is http://localhost/.../SilverlightApiService.svc I used fiddler on my vm to see the request that was made and instead of trying to contact the above service, it was trying to contact: http:///.../SilverlightApiService.svc So, for some reason my machine name is getting inserted in there instead of localhost. Any thoughts on this would be appreciated.

  Read the article

• Visual Studio Debugging Issue

  - by Aaron M

  Seeing an issue when debugging in Visual Studio. All of the values under watch, and in the hover over window show up incorrectly. the only values that show properly, are values that are local to the method I am currently stepping through. For example the watch value for 'this' when debugging shows the following under value 0x00000000ffac0388 { btnBack=0x00000000ffaccf20 btnReply=0x00000000ffacd200 btnForward=0x00000000ffacd420...} some other variables show this, even though the variable is there. error: 'this.foo' does not exist The machine recently had windows 7 64 installed, since then this problem has occured. Visual studio has been reinstalled on this machine, and we verified that the settings in visual studio were exactly the same as a different PC that is the same machine and config.

  Read the article

• Eclipse + Git: Can't add files to my repository

  - by Stegeman

  I use Eclipse (Helios) with PDT and egit. I have a project without versioning, so I created a git repository for it by doing: Team -> Share Project When I try to add the files of my project to the repository: Team -> Add I get an exception: Failed to add resource to index Failed to add resource to index Exception caught during execution of add command When I add the files manually on the command line, everything is working fine. Any ideas? EDIT: The error eclipse gives is: Caused by: org.eclipse.jgit.errors.ObjectWritingException: Unable to create new object: Z:\eage_layout\.git\objects\60\f30dd232bd6ddaeb198fb11400c2613a072189 at org.eclipse.jgit.storage.file.ObjectDirectoryInserter.insert(ObjectDirectoryInserter.java:100) at org.eclipse.jgit.api.AddCommand.call(AddCommand.java:177) The code I'm running is located on a virtual machine running on CentOs. I'm working on a windows machine and using a samba share to get access to the code on the virtual machine. I've put the filesystem permissions on my .git directory to 777, but still it does not work.

  Read the article

• SQL CLR not properly enabling

  - by dnolan

  We have a SQL server running SQL 2005 Workgroup 64 bit (9.0.4273), on Windows 2003 server 64 bit. We have run sp_configure and reconfigured the server which indicates that the clr is now enabled. exec sp_configure 'clr enabled', '1' go reconfigure go However, when trying to call CREATE ASSEMBLY the server completely dies on us and we have to do a full reboot of the machine. A little more diagnostic information, even though clr enabled is set to 1 and we have rebooted the full server, running the following statement select * from sys.dm_clr_properties returns directory version state locked CLR version with mscoree which is what it says when the CLR is not enabled on another machine. On a correctly enabled machine (after reboot) this function reads directory C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ version v2.0.50727 state CLR is initialized

  Read the article

• Migrating from VisualSVN on windows to linux based svn

  - by Jonathan

  I'd like to migrate my svn repository from my local computer running windows and VisualSVN 2.1.2 to an svn app on webfaction (my Linux hosting solution). Initially I tried dumping the svn: svnadmin dump *path_to_repository* *dumpfile_name* and loading it on the Linux machine svnadmin load *dumpfile_name* I received the following error: svnadmin: Can't open file '*dumpfile_path_and_name*/format': Not a directory I found that on my Windows machine I do have a format folder under the repository. So I copied the entire repository to the Linux machine and tried: svnadmin load *path_to_repository_copy* I received the following error: svnadmin: Expected FS format between '1' and '3'; found format '4' what should I do?

  Read the article

• "The specified table does not exist" - for the administrator it does! Vista only issue

  - by Simon Nunn

  Hello, I've got a weird bug occurring in a compact database on a Vista deployment machine. Basically the sdf file seem to be schizophrenic. The client application get the entitled error when running as a user but not when I use run as administrator. I don't see this problem on my XP development machine. I installed management studio onto the deployment machine and opened two versions of the application, one as user and one as administrator. When I query: SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES I see 21 tables on the one and 26 on the other, and the administrator is seeing less tables. It turns out that the user version, with 26 rows, is a previous incarnation of this database. Any ideas on why this is happening?

  Read the article

< Previous Page | 264 265 266 267 268 269 270 271 272 273 274 275  | Next Page >