Search Results

Search found 33468 results on 1339 pages for 'behaviour change'.

Page 27/1339 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• Developmnet process for an embedded project with significant Hardware change

  - by pierr

  Hi, I have a good idea about Agile development process but it seems it does not fit well with a embedded project with significant hardware change. I will describe below what we are currently doing (Ad-hoc way , no defined process yet). The change are divided to three categories and different process are used for them : complete hardware change example : use a different video codec IP a) Study the new IP b) RTL/FPGA simulation c) Implement the leagcy interface - go to b) d) Wait until hardware (tape out) is ready f) Test on the real Hardware hardware improvement example : enhance the image display quaulity by improving the underlie algorithm a)RTL/FPGA simulation b)Wait until hardware and test on the hardware Mino change exmaple : only change hardware register mapping a)Wait until hardware and test on the hardware The worry is it seems we don't have too much control and confidence about software maturity for the hardware change as the bring up schedule is always very tight and the customer desired a seemless change when updating to a new version hardware. How did you manage this kind of hardware hardware change? Did you solve that by a Hardware Abstraction Layer (HAL)? Did you have a automatical test for the HAL layer? How did you test when the hardware platform is not even ready? Do you have well documented process for this kind of change? Thanks for your insight.

  Read the article

• calculating change (over a period) for a dated field

  - by morpheous

  I have two tables with the following schema: CREATE TABLE sales_data ( sales_time date NOT NULL, product_id integer NOT NULL, sales_amt double NOT NULL ); CREATE TABLE date_dimension ( id integer NOT NULL, datestamp date NOT NULL, day_part integer NOT NULL, week_part integer NOT NULL, month_part integer NOT NULL, qtr_part integer NOT NULL, year_part integer NOT NULL, ); I want to write two types of queries that will allow me to calculate: period on period change (e.g. week on week change) change in period on period change (e.g. change in week on week change) I would prefer to write this in ANSI SQL, since I dont want to be tied to any particular db. [Edit] In light of some of the comments, if I have to be tied to a single database (in terms of SQL dialect), it will have to be PostgreSQL The queries I want to write are of the form (pseudo SQL of course): Query Type 1 (Period on Period Change) ======================================= a). select product_id, ((sd2.sales_amt - sd1.sales_amt)/sd1.sales_amt) as week_on_week_change from sales_data sd1, sales_data sd2, date_dimension dd where {SOME CRITERIA) b). select product_id, ((sd2.sales_amt - sd1.sales_amt)/sd1.sales_amt) as month_on_month_change from sales_data sd1, sales_data sd2, date_dimension dd where {SOME CRITERIA) Query Type 2 (Change in Period on Period Change) ================================================= a). select product_id, ((a2.week_on_week_change - a1.week_on_week_change)/a1.week_on_week_change) as change_on_week_on_week_change from (select product_id, ((sd2.sales_amt - sd1.sales_amt)/sd1.sales_amt) as week_on_week_change from sales_data sd1, sales_data sd2, date_dimension dd where {SOME CRITERIA) as a1), (select product_id, ((sd2.sales_amt - sd1.sales_amt)/sd1.sales_amt) as week_on_week_change from sales_data sd1, sales_data sd2, date_dimension dd where {SOME CRITERIA) as a2) WHERE {SOME OTHER CRITERIA}

  Read the article

• openGL ES - change the render mode from RENDERMODE_WHEN_DIRTY to RENDERMODE_CONTINUOUSLY on touch

  - by Sid

  i want to change the rendermode from RENDERMODE_WHEN_DIRTY to RENDERMODE_CONTINUOUSLY when i touch the screen. WHAT i Need : Initially the object should be stationary. after touching the screen, it should move automatically. The motion of my object is a projectile motion ans it is working fine. what i get : Force close and a NULL pointer exception. My code : public class BallThrowGLSurfaceView extends GLSurfaceView{ MyRender _renderObj; Context context; GLSurfaceView glView; public BallThrowGLSurfaceView(Context context) { super(context); // TODO Auto-generated constructor stub _renderObj = new MyRender(context); this.setRenderer(_renderObj); this.setRenderMode(RENDERMODE_WHEN_DIRTY); this.requestFocus(); this.setFocusableInTouchMode(true); glView = new GLSurfaceView(context.getApplicationContext()); } @Override public boolean onTouchEvent(MotionEvent event) { // TODO Auto-generated method stub if (event != null) { if (event.getAction() == MotionEvent.ACTION_DOWN) { if (_renderObj != null) { Log.i("renderObj", _renderObj + "lll"); // Ensure we call switchMode() on the OpenGL thread. // queueEvent() is a method of GLSurfaceView that will do this for us. queueEvent(new Runnable() { public void run() { glView.setRenderMode(RENDERMODE_CONTINUOUSLY); } }); return true; } } } return super.onTouchEvent(event); } } PS : i know that i am making some silly mistakes in this, but cannot figure out what it really is.

  Read the article

• Duplicate content issue after URL-change with 301-redirects

  - by David

  We got the following problem: We changed all URLs on our page from oldURL.html to newURL.html and set up 301-redirects (ca. 600 URLs) Google re-crawled our page, indexed all the new URLs (newURL.html), but didn't crawl the old URLs (oldURL.html) again, as there were no internal links pointing at those domains anymore after the URL-change. This resulted in massive ranking-drops, etc. because (i) Google thought oldURL.html has exactly the same content as newURL, causing duplicate content issues, and (ii) Google did not transfer the juice from oldURL to newURL, because the 301-redirect was never noticed. Now we reset all internal Links to the old URLs again, which then redirect to the newURLs, in the hope that Google would re-crawl the pages, once there are internal links pointing at them. This is partially happening, but at a really low speed, so it would take multiple months to notice all-redirects. I guess, because Google thinks: "Aah, I already know oldURL.html, so no need to re-crawl it. Possible solutions we thought of are ... Submitting as many of the old URLs to the index as possible via Webmaster Tools, to manually trigger a crawl. Doing that already Submitting a sitemap with all old URLs - but not sure if good idea, because Google does not seem to like 301-redirects in a sitemap ... Both solutions are not perfect - and we cannot wait for three months, just to regain our old rankings. What are your ideas? Best, David

  Read the article

• Change Data Capture

  - by Ricardo Peres

  There's an hidden gem in SQL Server 2008: Change Data Capture (CDC). Using CDC we get full audit capabilities with absolutely no implementation code: we can see all changes made to a specific table, including the old and new values! You can only use CDC in SQL Server 2008 Standard or Enterprise, Express edition is not supported. Here are the steps you need to take, just remember SQL Agent must be running: use SomeDatabase; -- first create a table CREATE TABLE Author ( ID INT NOT NULL PRIMARY KEY IDENTITY(1, 1), Name NVARCHAR(20) NOT NULL, EMail NVARCHAR(50) NOT NULL, Birthday DATE NOT NULL ) -- enable CDC at the DB level EXEC sys.sp_cdc_enable_db -- check CDC is enabled for the current DB SELECT name, is_cdc_enabled FROM sys.databases WHERE name = 'SomeDatabase' -- enable CDC for table Author, all columns exec sys.sp_cdc_enable_table @source_schema = 'dbo', @source_name = 'Author', @role_name = null -- insert values into table Author insert into Author (Name, EMail, Birthday, Username) values ('Bla', 'bla@bla', 1990-10-10, 'bla') -- check CDC data for table Author -- __$operation: 1 = DELETE, 2 = INSERT, 3 = BEFORE UPDATE 4 = AFTER UPDATE -- __$start_lsn: operation timestamp select * from cdc.dbo_author_CT -- update table Author update Author set EMail = '[email protected]' where Name = 'Bla' -- check CDC data for table Author select * from cdc.dbo_author_CT -- delete from table Author delete from Author -- check CDC data for table Author select * from cdc.dbo_author_CT -- disable CDC for table Author -- this removes all CDC data, so be carefull exec sys.sp_cdc_disable_table @source_schema = 'dbo', @source_name = 'Author', @capture_instance = 'dbo_Author' -- disable CDC for the entire DB -- this removes all CDC data, so be carefull exec sys.sp_cdc_disable_db SyntaxHighlighter.config.clipboardSwf = 'http://alexgorbatchev.com/pub/sh/2.0.320/scripts/clipboard.swf'; SyntaxHighlighter.all();

  Read the article

• How to change the Target URL of EditForm.aspx, DispForm.aspx and NewForm.aspx

  - by Jayant Sharma

  Hi All, To changing the URL of ListForms we have very limited options. On Inernet if you search you will lots of article about Customization of List Forms using SharePoint Desinger, but the disadvantage of SharePoint Desinger is, you cannot create wsp of the customization means what ever changes you have done in UAT environment you need to repeat the same at Production. This is the main reason I donot like SharePoint Desinger more. I always prefer to create WSP file and Deployment of WSP file will do all of my work. Now, If you want to change the ListForm URL using Visual Studio, either you have create new List Defintion or Create New Content Type. I found some very good article and want to share.. http://www.codeproject.com/Articles/223431/Custom-SharePoint-List-Forms http://community.bamboosolutions.com/blogs/sharepoint-2010/archive/2011/05/12/sharepoint-2010-cookbook-how-to-create-a-customized-list-edit-form-for-development-in-visual-studio-2010.aspx Whenever you create, either List Defintion or Content type and specify the URL for List Forms it will automatically add ListID and ItemID (No ItemID in case of NewForm.aspx) in the URL as Querystring, so if you want to redirect it or do some logic you can, as you got the ItemID as well as ListID.

  Read the article

• How To Change Window Transparency in Windows 7 with a Hotkey

  - by YatriTrivedi

  Linux has a lot of eye-candy because of Compiz, my favorite of which is the window opacity plugin. Using a short AutoHotKey script, you can add that same functionality to Windows 7. I used this AHK script as a basis for changing opacity. It uses a single hotkey to change the active window’s transparency by 25% each time until it resets to 0. I wanted functionality similar to Compiz, so I modified the script to use the mouse wheel and shortened the increments to get more variety. Just hold down the Windows key and scroll down to see through the window. This decreases opacity and makes windows more transparent. Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Hack Apart a Highlighter to Create UV-Reactive Flowers [Science] Add a “Textmate Style” Lightweight Text Editor with Dropbox Syncing to Chrome and Iron Is the Forcefield Really On or Not? [Star Wars Parody Video] Google Updates Picasa Web Albums; Emphasis on Sharing and Showcasing Uwall.tv Turns YouTube into a Video Jukebox Early Morning Sunrise at the Beach Wallpaper

  Read the article

• How to change system time or force a time sync

  - by cpury

  My laptop is probably running out of CMOS battery, I know I have to fix it soon, but until then, this very annoying issue keeps me from using it. Scenario: My system clock is reset to 15/12/08 11:00 AM every time I turn on my computer. This has all sorts of side-effects, one of the more annoying being that I can't log into my gmail. At first I just waited for a time sync to happen, as I have that activated and all. It never happened. I googled and didn't find any way of enforcing a time sync, which I found very strange. Is there really none? Setting the time and date by hand is also a problem. For my 12.10 installation, the time & date settings are bugged. I remember it being for my last, older installation as well, though. Of course the easiest way should be to just manually edit the date and time fields by entering a new date. This is possible in theory, but the changes are reverted as soon as the text boxes loose focus. The other way to do it is to click the +-buttons for a long, long time. The first time I did that, the changes weren't stored either. I found out that afterwards I have to switch from manual to internet-sync mode and wait ~5 seconds until the in the top left corner of my system the new time is shown, or otherwise it won't have effect. So a nice solution would be one of the following: Setting the time/date by hand, maybe via terminal, so I can just enter the right values. Or, a command that would enforce an immediate time sync, that I can run after booting. I know I have to change the batteries soon, but this is seriously keeping me from working...

  Read the article

• Small change in MVVM Light Toolkit templates for Blend 4 RC

  - by Laurent Bugnion

  Ah, the joy of new releases… You will find that the MVVM Light Toolkit works fine with Visual Studio 2010 RTM and Blend 4 RC except for a few adjustments: Blend templates The path to the Expression Blend 4 project templates changed. If you start Expression Blend 4 RC now, you will likely not see the MVVM Light templates in the New Project dialog.   New Project dialog with MVVM Light To restore the templates, follow the steps: Open Windows Explorer Navigate to C:\Users\[username]\Documents\Expression (or simply type My Documents in Windows Explorer and then open the Expression folder). Change the name of the “Blend 4 beta” folder into “Blend 4”. That’s it, you should now see the templates in the New Project dialog in Blend 4. Note that since the new name is “Blend 4”, I hope that I won’t need to do the same exercise when Blend 4 RTM is released! Windows Phone 7 templates Since the Windows Phone 7 tools are not ready yet for Visual Studio 2010 RTM and Blend 4 RC, the templates in the Silverlight for Windows Phone folders will not work. You will get an error if you try to create a new such project in the newly released environment. I hesitated to remove these templates from the current packages, but honestly that is a lot of trouble for a very short time before the tools for Windows Phone 7 are released (note: I don’t have any information as to when these tools will be released). In the mean time, just don’t create a WinPhone7 application. Reminder: If you want to write code for Windows Phone 7, you need to keep the Visual Studio 2010 RC as well as Expression Blend 4 beta. Updated package I uploaded an update to the Blend 4 templates. It is available like before on the “Install manually” page and on the Codeplex page.   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• Wheel rotation, to change velocity of vehicle

  - by Lewis

  I update the velocity of my vehicle like so: [v setVelocity: ((2 * 3.14 * 100 * (wheel.getRotationValue / 360) / 30)) * gameSpeed]; // update on 60 fps this gets velocity on all frames divide by 60 for 1 frame. This is done in my update method in my world class. Now wheel.getRotationValue returns the rotation value which is worked out like this: - (void)ccTouchesMoved:(NSSet *)touches withEvent:(UIEvent *)event { UITouch *touch = [touches anyObject]; CGPoint location = [touch locationInView:[touch view]]; location = [[CCDirector sharedDirector] convertToGL:location]; if (CGRectContainsPoint(wheel.boundingBox, location)) { CGPoint firstLocation = [touch previousLocationInView:[touch view]]; CGPoint location = [touch locationInView:[touch view]]; CGPoint touchingPoint = [[CCDirector sharedDirector] convertToGL:location]; CGPoint firstTouchingPoint = [[CCDirector sharedDirector] convertToGL:firstLocation]; CGPoint firstVector = ccpSub(firstTouchingPoint, wheel.position); CGFloat firstRotateAngle = -ccpToAngle(firstVector); CGFloat previousTouch = CC_RADIANS_TO_DEGREES(firstRotateAngle); CGPoint vector = ccpSub(touchingPoint, wheel.position); CGFloat rotateAngle = -ccpToAngle(vector); CGFloat currentTouch = CC_RADIANS_TO_DEGREES(rotateAngle); float limit = 0.5; rotationValue += (currentTouch - previousTouch) * limit; } touching = YES; } Say I steer the vehicle to the far right of the screen, and want to move it to the far left, It wont start moving to the left of the screen until the rotationValue is past 0 degrees again (the wheel is in its center posistion) and is dragged past this value. Is there anyway to change the code I have above, so that movement on the wheel is recognised instantly and updates the velocity of v instantly too?

  Read the article

• Change X settings to boot into laptop with non working screen using an external monitor

  - by dassouki

  My laptop committed suicide. Is there a way I can boot into my ubuntu using an external screen? Ubuntu 10.10 video: Nvidia 9500 gm i think I can get dual screen upto and until the ubuntu login screen at which point it goes back into laptop display only. Then I can just type and enter my password. The system (i assume boots into ubuntu) but I got no way of going onto the x or nvidia settings to change my display to external monitor EDIT well I booted into terminal using control shift F1 i think, and now I'm trying to reporgram x.org, but strangely it seems bland with not a lot of settings in it EDIT 2 xrandr returns "Can't open display" EDit 3 after some messing around with xrandr and xinit ... my x.org only displays one monitor instead of two in its settings although both, i.e. the laptop and external screens are both connected. EDIT 4 it seems that x.org now has a "screen" and "monitor" section, I can't seem to be able to boot linux into monitor. I get a "Monitor is not a valid keyword" in this subsection

  Read the article

• Change order of monitors without changing fullscreen"size"

  - by user171489

  I have a dual monitor setup. My primary monitor is a 22" with a max resolution of 1680x1050 and my secondary is a 19" with a max resolution of 1280x1024. The secondary is standing on the left side of the primary one. My problem now is, that, if I change the order of the monitors in my nvidia x-server settings, so that my secondary is the first one (or the one on the left), the fullscreen mode in flash in scaled up to my secondary monitor, even if it´s displayed on my primary one. Meaning that i get a 1280x1024 "fullscreen" window on my bigger primary monitor. When I configure my x-server settings so the secondary monitor is the one on the right, I don´t have this problem. The only thing then is, that I have to scroll out on the right to get to my monitor on the right. I can´t move my secondary monitor on the right side of my primary due to lack of space and my belief that there must be a software solution. ;) Thanks in advance.

  Read the article

• A (slight) Change of Focus

  - by StuartBrierley

  When I started this blog in September 2009 I was working as a BizTalk developer for a financial institution based in the South West of England.  At the time I was developing using BizTalk Server 2004 and intended to use my blog to collate and share any useful information and experiences that I had using this version of BizTalk (and occasionally other technologies) in an effort to bring together as many useful details as I could in one place. Since then my circumstances have changed and I am no longer working in the financial industry using BizTalk 2004.  Instead I have recently started a new post in the logistics industry, in the North of England, as "IT Integration Manager".  The company I now work for has identified a need to boost their middleware/integration platform and have chosen BizTalk Server 2009 as their platform of choice; this is where I come in. To start with my role is to provide the expertise with BizTalk that they currently lack, design and direct the initial BizTalk 2009 implementation and act as lead developer on all pending BizTalk projects.  Following this it is my hope that we will be able to build on the initial BizTalk "proof of concept" and eventually implement a fully robust enterprise level BizTalk 2009 environment. As such, this blog is going to see a shift in focus from BizTalk 2004 to BizTalk 2009 and at least initially is likely to include posts on the design and installation of our BizTalk environment - assuming of course that I have the time to write them! The last post I made was the start of a chapter by chapter look at the book SOA Patterns with BizTalk Server 2009.  Due to my change of job I am currently "paused" half way through this book, and my lack of posts on the subject are directly as a result of the job move and the pending relocation of my family.  I am hoping to write about my overall opinion of this book sometime soon; so far it certainly looks like it will be a positive one. Thanks for reading; I'm off to manage some integration.

  Read the article

• How to Change the Cmd+Q Shortcut Key in OS X (to Stop Accidentally Closing Apps)

  - by The Geek

  If you’ve spent any time using Mac OS X, you’ve figured out that the Cmd+W shortcut key closes a window or tab, while the Cmd+Q key quits the entire app. The problem? The keys are right next to each other, and way too easy to accidentally hit! Here’s how to change it. This problem is compounded even more when you’re using an application like Google Chrome, Safari, or Firefox, where you’re opening or closing tabs all the time, and probably using the Cmd+W key to close just the current tab. If you aren’t careful, you’ll accidentally hit Cmd+Q instead, and your entire browser gets closed. Latest Features How-To Geek ETC How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know HTG Explains: Which Linux File System Should You Choose? HTG Explains: Why Does Photo Paper Improve Print Quality? Awesome WebGL Demo – Flight of the Navigator from Mozilla Sunrise on the Alien Desert Planet Wallpaper Add Falling Snow to Webpages with the Snowfall Extension for Opera [Browser Fun] Automatically Keep Up With the Latest Releases from Mozilla Labs in Firefox 4.0 A Look Back at 2010 Through Infographics Monitor the Weather with the Weather Forecast Extension for Opera

  Read the article

• Change the Log Level of Node Manager.

  - by adejuanc

  This is useful to troubleshoot issues related to Node Manager, such as problems starting a Managed Server or reasons a server could be (re)started. To change the Log Level of Node Manager, you need to edit the nodemanager.properties file. This is usually located at: <MIDDLEWARE_HOME>/wlserver_10.3/common/nodemanager What you need to modify is property: ...LogLevel=INFO... Information about the appropriate values for this property is available in the Node Manager Documentation at 10.3 WebLogic Documentation (and in further releases) which states: LogLevel: Severity level of logging used for the Node Manager log. Node Manager uses the same logging levels as WebLogic Server. Default value: INFO However, this is incorrect. WLS has its own implementation of LogLevel, but Node Manager uses the standard Log Level from the java.util.logging.Level class. Therefore, the possible values for Node Manager LogLevel, in descending order are: SEVERE (highest value) WARNING INFO CONFIG FINE FINER FINEST (lowest value) The highest value provides only messages at the severe level. The warning level provides warning messages and severe messages, and so on. Besides those levels, ALL and OFF are also accepted. For example, if you only want Severe messages to be logged, select SEVERE. If you need the most detailed tracing available, select FINEST. For more information on what it will log at each level, please read the Java SE API for LoggingLevel.

  Read the article

• How to automatically mount a folder and change ownership from root in virtualbox

  - by Fiztban

  It is my first time using virtualbox and ubuntu (14.04), I am on a host Windows 7 OS. I am trying to mount a shared folder that has files I need to access both in the virtualbox and on the windows OS. I have successfully mounted them using the vboxsf from the Guest Additions installed. To mount I used the command sudo mount -t vboxsf <dir name in vbox> <directory in linux for example I used sudo mount -t vboxsf Test /home/user/Test I found several ways of mounting the directories automatically upon startup using for example the /etc/rc.local method (here) where you modify said file appending the command to it (without sudo). Or by using the fstab method (here). I prefer the rc.local method personally. Once mounted it has permissions dr-xr-xr-x however once mounted the directory is of root ownership and chown user /home/user/Test has no effect. This means I cannot make or change files in it as a normal user. In the VirtualBox the directory to be shared is not set as read-only. Is there a way to automatically mount the shared folder and assign ownership to my non root user?

  Read the article

• Location Change Salary Differences [closed]

  - by GameDev

  DISCLAIMER: I know that this might be a "regional" question but I'm also asking for help as far as what resources to use to determine my decision. I'm currently talking to a recruiter for a game developer in the SF Bay area. I work in a relatively low-cost area in the south. I really want to get into game development but my current career is general web development. I'm very interested in taking the job, but my concern is that the amount they're willing to pay might be a relative pay cut. Here are some factors: It's not an entry-level position, the title is Senior Software Engineer. I have 5+ years of experience. The calculators online tell me that I should be expecting around 2x my current pay rate(http://www.bestplaces.net/col/). My current pay is in the mid $60k/yr, so that's like 120-130k. The recruiter told me at my experience level I can expect about $90-100/yr, and that those cost of living calculators were way off. The benefits will definitely be better, it's much larger company (help with commuting, catered meals, etc). But is the recruiter trying to give me a snow job on the pay scale, or is that a reasonable change from a smallish town in the south to somewhere in the SF bay area? How can I find this out? Glassdoor and Payscale seem to say "senior software developers" in that area make around 110 in median salary, but Payscale says it's closer to $135k, that range seems pretty large.

  Read the article

• Weird RecordStore behavior when RecordStoreFullException occurs

  - by Michael P

  Hello everyone! I'm developing a small J2ME application that displays bus stops timetables - they are stored as records in MIDP RecordStores. Sometimes records can not fit a single RecordStore, especially on record update - using setRecord method - a RecordStoreFullException occurs. I catch the exception, and try to write the record to a new RecordStore along with deleting the previous one in the old RecordStore. Everything works fine except of deleting record from RecordStore where the RecordStoreFullException occurs. If I make an attempt to delete record that could not be updated, another Exception of type InvalidRecordIDException is thrown. This is weird and undocumented in MIDP javadoc. I have tested it on Sun WTK 2.5.2, MicroEdition SDK 3.0 and Nokia Series 40 SDK. Furthermore I created a code that reproduces this strange behaviour: RecordStore rms = null; int id = 0; try { rms = RecordStore.openRecordStore("Test", true); byte[] raw = new byte[192*10024]; //Big enough to cause RecordStoreFullException id = rms.addRecord(raw, 0, 160); rms.setRecord(id, raw, 0, raw.length); } catch (Exception e) { try { int count = rms.getNumRecords(); RecordEnumeration en = rms.enumerateRecords(null, null, true); count = en.numRecords(); while(en.hasNextElement()){ System.out.println("NextID: "+en.nextRecordId()); } rms.deleteRecord(id); //this won't work! rms.setRecord(id, new byte[5], 0, 5); //this won't work too! } catch (Exception ex) { ex.printStackTrace(); } } I added extra enumeration code to produce other weird behavior - when RecordStoreFullException occurs, count variable will be set to 1 (if RMS was empty) by both methods - getNumRecords and numRecords. System.out.println will produce NextID: 0! It is not acceptable because record ID can not be 0! Could someone explain this strange behavior? Sorry for my bad English.

  Read the article

• VB.net Edit-And-Continue: ignore "unable to apply this change while debugging"

  - by FastAl

  When using VB.Net (2008) and paused in debugging, Edit-And-Continue is a great time-saver. However if you change any module/class-level information (variable, sub/function signature, etc), you get the error message like this: "unable to apply this change while debugging" While I can understand the technical challenge to making this work (and why it would be hard), it leaves me in a tight spot with just a few options: 1) Restart and recompile and get the program back to the same state 2) Continue debugging without making the change, and risk forgetting 3) Type up a reminder note to make the change All of which are annoying. Now I know that option '4) Just actually make the change' may not be possible. but does anybody know how to enable the following 'technically easy' possibility? 4) Let me change the code, get it flagged with the purple squiggly underline, so I can save it, but just ignore the change until recompile I have checked the Tools|options|debug|edit and continue, nothing appears to let me do this. thanks!

  Read the article

• Avoid SEO loss after URL structure change

  - by Eric Nguyen

  We recently re-wrote our site from Umbraco to WordPress. This has been done by third-party developers. I have been the project manager and it is my mistake that I haven't notice the change of URLs that affect SEO until now. New site was launch last Thursday. The old URL for a "place" (a WordPress custom post type, in case you're WordPress expert and want/ need to point me to another discussion on WP Stackexchange) page is as follows: ourdomain.com/singapore/central/alexandra/an-interesting-place Now it has been changed to ourdomain.com/places/an-interesting-place I have already requested the third-party developers to work rewriting the URLs to emulate the old URL structure. However, it's taking quite a lot of time (we have multiple custom post types e.g. events etc. so it might be complicated; the developers seem quite by blur when I first mentioned rewriting URLs for the custom post types) In the meantime, I wonder if there is a quicker work around for this 1) Use .htaccess to rewrite ourdomain.com/singapore/central/alexandra/an-interesting-place to ourdomain.com/places/an-interesting-place This should avoid 90% loss of the search traffic. I suppose I can learn how to do this quite quickly but no harm mentioning it here 2) Use rel="canonical" to indicate that ourdomain.com/places/an-interesting-place is the exact duplicate of ourdomain.com/singapore/central/alexandra/an-interesting-place I will definitely go for both approaches (and also I'm changing 404 page to cater for this temporary isue) but I wonder if 2) is even feasible and if I have missed anything. Is there anything else you could recommend me in this situation. Let me know if my question is not clear anywhere. Clarifications The old website is on a Windows Server EC2 completely separated from the Linux EC2 instance on which the new site is running. In addition, the same domain "ourdomain.com" is used here (an A record is used to point to an EC2 Elastic IP). Therefore, the old server is completely inaccessible at the moment, unless you we use the IP address to old server (which doesn't help me at all in this case). Even if the old server is accessible, I can't see where one can put the .htaccess or a HTML file to do 301 redirect here. Unless I'm successful with my approach 1) or the developers can rewrite the URLs with coding, 404 page is really a choice for me.

  Read the article

• Characteristics of a Web service that promote reusability and change

  Characteristics of a Web service that promote reusability and change:  Standardized Data Exchange Formats (XML, JSON) Standardized communication protocols (Soap, Rest) Promotes Loosely Coupled Systems  Standardized Data Exchange Formats (XML, JSON) XML W3.org defines Extensible Markup Language (XML) as a simplistic text format derived from SGML. XML was designed to solve challenges found in large-scale electronic publishing. In addition,  XML is playing an important role in the exchange of data primarily focusing on data exchange on the web. JSON JavaScript Object Notation (JSON) is a human-readable text-based standard designed for data interchange. This format is used for serializing and transmitting data over a network connection in a structured format. The primary use of JSON is to transmit data between a server and web application. JSON is an alternative to XML. Standardized communication protocols (Soap, Rest) Soap W3Scools.com defines SOAP as a simple XML-based protocol. This protocol lets applications exchange data over HTTP.  SOAP provides a way to communicate between applications running on different operating systems, with different technologies and programming languages. Rest In 2007, Stefan Tilkov defines Representational State Transfer (REST) as a set of principles that outlines how Web standards are supposed to be used.  Using REST in an application will ensure that it exploits the Web’s architecture to its benefit. Promotes Loosely Coupled Systems “Loose coupling as an approach to interconnecting the components in a system or network so that those components, also called elements, depend on each other to the least extent practicable. Coupling refers to the degree of direct knowledge that one element has of another.” (TechTarget.com, 2007) “Loosely coupled system can be easily broken down into definable elements. The extent of coupling in a system can be measured by mapping the maximum number of element changes that can occur without adverse effects. Examples of such changes include adding elements, removing elements, renaming elements, reconfiguring elements, modifying internal element characteristics and rearranging the way in which elements are interconnected.” (TechTarget.com, 2007) References: W3C. (2011). Extensible Markup Language (XML). Retrieved from W3.org: http://www.w3.org/XML/ W3Scools.com. (2011). SOAP Introduction. Retrieved from W3Scools.com: http://www.w3schools.com/soap/soap_intro.asp Tilkov, Stefan. (2007). A Brief Introduction to REST. Retrieved from Infoq.com: http://www.infoq.com/articles/rest-introduction TechTarget.com. (2011). loose coupling. Retrieved from TechTarget.com: http://searchnetworking.techtarget.com/definition/loose-coupling

  Read the article

• Automatically change resolution when not in dock

  - by jwir3

  I have Ubuntu 11.04 (yep, I know it's old news) on my Lenovo W520. At home, I have a dock with dual monitors. I have a pretty decent setup - things work almost perfectly (hence the reason I'm reluctant to upgrade... that and I'm not 100% sold on Unity). Anyway, the only annoyance I have is that when I'm on travel, I use the laptop screen. When I un-dock the laptop, I need to manually go into nvidia x-server settings and change the resolution from 'Auto' to 1920x1200, or it will think I have two screens, and my mouse pointer will be able to go way off the left side of the screen. This isn't a big deal, but I need to do it every time I restart the x-server (so if I reboot, or have to kill it, etc...) What would be really nice is if there was a way for it to automatically detect whether or not there is external monitors (which it seems to do already), and switch into the mode I select, depending on which monitors are connected. Is there any way to accomplish this? I've posted my xorg.conf file for reference. # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 275.19 ([email protected]) Tue Jul 12 18:35:38 PDT 2011 #Section "Monitor" # Identifier "Monitor1" # VendorName "Lenovo" # ModelName "ThinkpadLCD" # #HorizSync 28.0 - 33.0 # #VertRefresh 43.0 - 72.0 # #Option "DPMS" #EndSection Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "DELL U2410" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro 1000M" Option "RegistryDwords" "EnableBrightnessControl=1" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+120, DFP-6: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+120, DFP-5: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +1920+419, DFP-5: nvidia-auto-select +3840+0, DFP-6: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-5: nvidia-auto-select +0+0, DFP-6: 1920x1200 +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "NoLogo" "True" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "TwinView" "1" Option "metamodes" "DFP-5: nvidia-auto-select +1920+0, DFP-6: 1920x1200 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Tulsa SharePoint Interest Group - How SharePoint 2010 Business Connectivity Services could change yo

  - by dmccollough

  Bio: Corey Roth is a consultant at Stonebridge specializing in SharePoint solutions in the Oil & Gas Industry. He has ten plus years of experience delivering solutions in the energy, travel, advertising and consumer electronics verticals. Corey has always focused on rapid adoption of new Microsoft technologies including Visual Studio 2010, SharePoint 2010, .NET Framework 4.0, LINQ, and SilverLight. He also contributed greatly to the beta phases of Visual Studio 2005. For his contributions, he was awarded the Microsoft Award for Customer Excellence (ACE). Corey is a graduate of Oklahoma State University. Corey is a member of the .NET Mafia (www.dotnetmafia.com) where he blogs about the latest technology and SharePoint. Abstract: How SharePoint 2010 Business Connectivity Services could change your life - The New BDC How many hours have your wasted building simple ASP.NET applications to do nothing more than simple CRUD operations against a database.  Many tools have made this easier, but now it's so easy, you'll be up and running in minutes.  This session will show you hot easy it is to get started integrating external data from your line of business systems in SharePoint 2010.  You will learn how to register an external content type using SharePoint Designer based upon a database table or web service and then build an external list.  With external lists, you will see how you can perform CRUD operations on your line of business directly from SharePoint without ever having to do manual configuration in XML files.  Finally, we will walk through how to create custom edit forms for your list using InfoPath 2010. Agenda: 6pm - 6:30 Pizza and Mingle - Sponsored by TekSystems 6:30 - 6:45 Announcements 6:45 - 7:45 Presentation! 7:45 - 8:00 Drawings and Door Prizes Location: TCC (Tulsa Community College) Northeast Campus 3727 East Apache Tulsa, OK 74115 918-594-8000 Campus Map | Live | Yahoo | Google | MapQuest Door Prizes: We will be giving away one of each of these: XBox 360 - Halo 3 ODST Telerik Premium Collection ($1300.00 value) ReSharper ($199.00 value) SQLSets ($149.00 value) 64 bit Windows 7 Introducing Windows 7 for Developers Developing Service-Oriented AJAX Applications on the Microsoft Platform Sponsors: Thanks to our sponsors: TekSystems - Thanks for purchasing the Pizza for our meetings. ISOCentric - Thanks for providing us hosting for the groups web site. Tulsa Community College - Thanks for providing us a place to have our meetings. NEVRON - Thanks for providing us prizes to give away. INETA.org - For allowing us to be a Charter Member and providing awesome Speakers! PERPETUUM Software - Thanks for providing us prizes to give away. Telerik - Thanks for providing us prizes to give away. GrapeCity - Thanks for providing us prizes to give away. SQLSets - Thanks for providing us prizes to give away. K2 - Thanks for providing us prizes to give away. Microsoft - For providing us with a lot of support and product giveaways! Orielly books - For providing us with books and discounts. Wrox books - For providing us with books and discounts. Have any special requests? Let us know at this link: http://tinyurl.com/lg5o38. RSVP for this month's meeting by responding to this thread: http://tinyurl.com/yafkzel . (Must be logged in to the site) Be SURE to RSVP no later than Noon on April 12th and you will get an extra entry for the prize drawings! So, do it now, before you forget and miss out! Show up for the first time or bring a new buddy and you both get TWO extra entries!

  Read the article

• How can I change mouse keymapping

  - by zuberuber

  I have Razer DeathAdder(left handed edition) and A4Tech wireless mouse. My problem is I don't know how to change wireless mouse keymapping(swaping left/right click). Can somebody guide me how to do such thing? List of my devices: ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Logitech Unifying Device. Wireless PID:4004 id=8 [slave pointer (2)] ? ? Razer Razer DeathAdder id=11 [slave pointer (2)] ? ? A4TECH USB Device id=12 [slave pointer (2)] ? ? A4TECH USB Device id=13 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Logitech USB Keyboard id=9 [slave keyboard (3)] ? Logitech USB Keyboard id=10 [slave keyboard (3)] This is my Razer xinput: Device 'Razer Razer DeathAdder': Device Enabled (121): 1 Coordinate Transformation Matrix (123): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000 Device Accel Profile (246): 0 Device Accel Constant Deceleration (247): 5.000000 Device Accel Adaptive Deceleration (248): 1.000000 Device Accel Velocity Scaling (249): 10.000000 Device Product ID (240): 5426, 22 Device Node (241): "/dev/input/event4" Evdev Axis Inversion (250): 0, 0 Evdev Axes Swap (252): 0 Axis Labels (253): "Rel X" (131), "Rel Y" (132), "Rel Vert Wheel" (274) Button Labels (254): "Button Left" (124), "Button Middle" (125), "Button Right" (126), "Button Wheel Up" (127), "Button Wheel Down" (128), "Button Horiz Wheel Left" (129), "Button Horiz Wheel Right" (130), "Button Side" (269), "Button Extra" (270), "Button Forward" (271), "Button Back" (272), "Button Task" (273), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243) Evdev Middle Button Emulation (255): 0 Evdev Middle Button Timeout (256): 50 Evdev Third Button Emulation (257): 0 Evdev Third Button Emulation Timeout (258): 1000 Evdev Third Button Emulation Button (259): 3 Evdev Third Button Emulation Threshold (260): 20 Evdev Wheel Emulation (261): 0 Evdev Wheel Emulation Axes (262): 0, 0, 4, 5 Evdev Wheel Emulation Inertia (263): 10 Evdev Wheel Emulation Timeout (264): 200 Evdev Wheel Emulation Button (265): 4 Evdev Drag Lock Buttons (266): 0 And this is my wireless mouse xinput: Device 'A4TECH USB Device': Device Enabled (121): 1 Coordinate Transformation Matrix (123): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000 Device Accel Profile (246): 0 Device Accel Constant Deceleration (247): 1.000000 Device Accel Adaptive Deceleration (248): 1.000000 Device Accel Velocity Scaling (249): 10.000000 Device Product ID (240): 2522, 1359 Device Node (241): "/dev/input/event16" Evdev Axis Inversion (250): 0, 0 Evdev Axes Swap (252): 0 Axis Labels (253): "Rel X" (131), "Rel Y" (132), "Rel Horiz Wheel" (245), "Rel Vert Wheel" (274) Button Labels (254): "Button Left" (124), "Button Middle" (125), "Button Right" (126), "Button Wheel Up" (127), "Button Wheel Down" (128), "Button Horiz Wheel Left" (129), "Button Horiz Wheel Right" (130), "Button Side" (269), "Button Extra" (270), "Button Forward" (271), "Button Back" (272), "Button Task" (273), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243) Evdev Middle Button Emulation (255): 0 Evdev Middle Button Timeout (256): 50 Evdev Third Button Emulation (257): 0 Evdev Third Button Emulation Timeout (258): 1000 Evdev Third Button Emulation Button (259): 3 Evdev Third Button Emulation Threshold (260): 20 Evdev Wheel Emulation (261): 0 Evdev Wheel Emulation Axes (262): 0, 0, 4, 5 Evdev Wheel Emulation Inertia (263): 10 Evdev Wheel Emulation Timeout (264): 200 Evdev Wheel Emulation Button (265): 4 Evdev Drag Lock Buttons (266): 0

  Read the article

• Change the Way Google Search Results Display in Firefox

  - by Asian Angel

  Are you tired of the default look for search results at Google? If you want a different and customized pleasing look for them, then join us as we look at the GoogleMonkeyR User Script. Note: User Style Scripts & User Scripts can be added to most browsers but we are using Firefox & the Greasemonkey extension for our example here. Before Here is the standard look for search results at Google…not bad but it really does not stand out that well either. Installing the User Script You may be asking yourself what makes this particular user script different from others. Take a look at the list of goodies that you get access to and you will understand: Multiple columns of results Removes “Sponsored Links” Add numbers to the results Auto-load more results Removes web search dialogues Open links in a new tab Favicons GooglePreview Self updating Can be configured from a simple user dialogue To get started click on the Webpage Install Button. Once you click on the Webpage Install Button you will see the following window asking for confirmation to add the user script to Firefox. Click Install to complete the process. GoogleMonkeyR in Action Refreshing the same search page shown above shows a noticeable difference already. The light blue background makes the search results stand out a bit better. This is an improvement from before but you will definitely want to have a look to see just how far you can go… Right click on the Greasemonkey Status Bar Icon, go to User Script Commands, and select GoogleMonkeyR Preferences. Once you have clicked on GoogleMonkeyR Preferences the search page will be shaded out and you will have access to the user script’s preferences. This is where you can really make your search results unique looking! Here are the changes that we started out with… After refreshing our search results things looked even better. A look at the entire page of results with our browser maximized and set for two columns. If you have the Auto load more results Option enabled new results will be added very quickly as you scroll down. Our set of search results after adding Favicons & GooglePreview Images. Conclusion If you have been wanting a more dramatic and pleasing look for the search results at Google then you can not go wrong with the GoogleMonkeyR User Script. Change as little or as much as you want to get that perfect look in your browser. Link Install the GoogleMonkeyR User Script Download the Greasemonkey extension for Firefox (Mozilla Add-ons) Similar Articles Productive Geek Tips Make Firefox Quick Search Use Google’s Beta Search KeysMake Firefox Built-In Search Box Use Google’s Experimental Search KeysMake Firefox Show Google Results for Default Address Bar SearchesCombine Wolfram Alpha & Google Search Results in FirefoxHow To Run 4 Different Google Searches at Once In the Same Tab TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >