Search Results

Search found 17267 results on 691 pages for 'home router'.

Page 27/691 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• Do I need a Gigabit router with a 24Mbps down and 7Mbps upload speed cable modem?

  - by djangofan

  Do I need a Gigabit port capable wireless router with a 24Mbps down and 7Mbps upload speed cable modem? Does anyone know how to calculate this? FYI, I wont be using the wireless connection from my main computer system. My computer will connect via a hard wire into the router (of the wireless variety), which in turn is connected to the cable modem. My research suggests that the 100 Mbps port can easily handle it. Is that true?

  Read the article

• How come I can't redirect TCP ports on this wireless router?

  - by George Edison

  I am configuring a router to redirect TCP port 5900 (yes, this is for VNC) to a specific IP address on the network. Here is what I have: From a local computer on the same network, I can telnet to 192.168.1.64 (port 5900) just fine. However, when trying to telnet to the machine (port 5900) using its external IP address, it doesn't work. (The connection times out.) The router is a Gigaset SE567, if that helps.

  Read the article

• What is an edge router and how does it work? [closed]

  - by Xaisoft

  Possible Duplicate: What is an edge server / router / device? Can someone tell me what an Edge Router is and how it works? Examples and analogies are always welcome.

  Read the article

• 220 **** smtp banner while telnet mail server on a Windows XP , hmail server linksys WRT120 n router

  - by panindra

  we have setup server ,mail server using HMail server and oyr RDNS / PTr is also solved but when do smtp test from mxtoolbox.com we are getting 220 *** kind of message. our server configuration : OS : windows XP Mail Server : Hmail Server IP : Staic IP Router : Cisco LInksys WRT12N is this some thing related to router or what .. becouse if telnet the smtp in the same PC where hmailerver installed we are getting 220 domain.com as message . which is fine for us but when test fromoutside the rotuer we are getting 220 * how to fix this

  Read the article

• Where do I buy a router that can be customized?

  - by superuser

  I want a router to compile and upload my c application to it. Is there such a router , can you recommend?

  Read the article

• Home Networking Questions

  - by Eddie Parker

  Hello: I'm looking to wire my home with CAT-X (where X is probably going to be CAT-6, unless someone can convince me differently. ;) ). I'm seeking advice on what equipment I'll need for the job, and any things I should watch out for. It's a two story half-duplex I'll be wiring, roughly about 1800 sq ft. Here's what I believe I need so far: Bulk CAT-6 Ethernet cabling CM Rated Gigabit switch(es?) Patch panel Equipment for cutting, terminating wire, fishing through walls, etc Wall outlet covers, etc. Questions I have: Does it matter the MHz rating on the Ethernet cable? If so, why? I have two gigabit switches currently, an 8-port and a 5-port. Should I buy one massive switch to cover all the connections I need, or should I just chain the two together and buy a switch for however many other connections I need? Do I really need a patch panel? I understand it keeps the cables looking cleaner than coming out of a hole in the wall, but is there some other product I can use, perhaps combining a switch with a patch panel or some such? Ideally I'll have all this running out of a relatively small closet, so the less components (or smaller) the better. Any advice, links, or suggested product to use/avoid would be appreciated!

  Read the article

• Running DNS locally for home network

  - by Roy Rico

  I have a small home network that just got larger ( New roommate, My existing roommate got a laptop (on top of her computer)j, my friends coming over with laptop, etc ). I'd like to run a local DNS server for lookups of my local network stuff (fileserver.local, windowsTV.local, machineA.local, machineB.local, appletv.local). I used to have a business line with a static IP, and run bind/named internally. However, now, I have a normal account. My ISP's DNS servers are constantly changing (for whatever reasons my ISP doesn't like to keep the same IP range for long). I need my local DNS to be automatically updated to use my ISP's DNS for external traffic, but be able to maintain an internal DNS server (getting to update the hosts file is being a hassle with every new machine on top of rebuilding existing machines with win7 or Ubuntu 9.04). Additionally, My ISP's DNS servers often crash or become unresponsive. Are there any open DNS servers that are reliable (i don't want to reconfig every day) that I could use as my primary, then if those fail, then use my ISP's? UPDATE: Also looking for each workstation to be able to use dhcp to connect, but instead of getting ISP dns servers, getting my internal one.... Thanks

  Read the article

• windows Home Server backup error

  - by domen

  I've finally built my WHS, but some other problems have showed up. I've googled, binged and searched SU with no success. The problem is following: at the moment I've got a Win7 laptop and Win7 PC, which should be backed up by the WHS. Laptop is backed up just fine with no issues, but when I try to manually backup the PC, after "backup is starting" message, when backup service should be monitoring changes on partitions, PC gets disconnected from the home network and thus, the backup process is stuck. Disabling/enabling network adapter gets PC back on the network. The only thing I've tried was reinstalling connector software. no success. Also, I've downloaded connector troubleshooter and only thing it says is "DHCP server was not found". I'm not good with networks, so I couldn't figure out what could that indicate (all computers in the network are assigned static IPs). Any ideas what the problem can be? I can provide any additional information, I'm just not sure what may be helpful right now. Thanks.

  Read the article

• Sharing internet connection from Windows XP using wi-fi router

  - by Darius

  Hi, I have an network configuration like: Ethernet cable from ISP connected to Windows XP machine, configured with static IP 192.168.0.3 Another ethernet connection from 2nd Windows XP machine's network adapter to a Wi-Fi router (D-Link Airport G+) XP set to "Share internet connection", the 2nd adapter configured as static to 192.169.0.1 D-Link Airport Wi-Fi router also configured as "static connection", it's IP set to 192.169.0.2, default gateway set to 192.169.0.1. Network mask everywhere is 24. Laptop computer connected with the router with static IP 192.169.0.3 The problems are: XP machine sees the router (it's able to ping it and access it via the web admin tool) The router somehow cannot PING the XP machine (using the tool provided by the web-based admin tool) The laptop computer cannot ping anything and cannot be pinged The router is only accessible when the ethernet cable is connected with a router's 1-4 LAN port, when I connect it via "WAN" port (which I believe is the proper one) it's not visible from the XP machine If you have similar experience with configuring a network like this I would really appreciate your help. I cannot use the Wi-Fi router with the ISP cable itself.

  Read the article

• Home Server: storage virtualisation, what to choose?

  - by Huygens

  I'm looking for virtualisation solutions for storage and OS for a home server. A sort of private cloud where I manage the storage space independently of the VM one. This question focus on storage management. (I have another question related to the VM/compute instance management). Here my environement and wishes. Server: HP Proliant MicroServer with 8 GB RAM (AMD Turion dual core with AMD-V technology) with 1 250GB system disk and up to 4 HDD (2 TB) for "data" OS types: only Linux (perhaps a *BSD VM in the future) Linux distributions do not matter, I'm familiar with RHEL, Fedora, Suse, Ubuntu, but any other recommandation will be fine The 4 HDD is going to be a software RAID array, probably RAID 5. storage should be "virtualised/cloudified": easy to extend: if I add a NAS on the network, I can include the NAS space capacity within this storage space as one virtual disk. This can be a NAS, an external HDD or another server. cluster FS or S3 style space or OpenStack block storage? Whatever is easier to manage/maintain and easy to integrate/plug to VM/compute instance. I would prefer free (libre, as in a free speach) and open source tools. But it does not have to be free as in a free beer. Note: the VMs I intend to run on top of this server are one dedicated to backup, one for a "owncloud/dropbox"-like service and perhaps one for media server (hosting video and photos). I'm not sure if traditional VMs or compute instance are the most suitable for this.

  Read the article

• Windows Home Server 2011, No disks "suitable for a backup destination"

  - by Scott Beeson

  I recently installed Windows Home Server 2011 and love it. However, when I try to set up server backups, it says no suitable disks are available. Initially, before I set up my RAID, it found one of my twin drives and said it would work. Once I set up the mirroring, that one is no longer available (obviously). However, I have an internal SATA 1TB drive and an external USB2.0 1TB drive hooked up. Both are recognized by Disk Management. WHS11 still says nothing suitable for backups. The two drives details are as follows: Edit to clarify: The system partition is on Disk 0, not listed below. The two below are the two that SHOULD be available for system backups. Disk 1: Dynamic "Data" (D:) 931.51 GB NTFS, Healthy Disk 3: Basic 200 MB Healthy (EFI System Partition) "Backup" 930.66 GB NTFS, Healthy (Primary Partition) What's a bit odd is that in Disk Management the "Backup" volume does not show a drive letter, even though I assigned Z: (which is reflected in "My Computer". I also cannot make this a dynamic disk as it says it's unsupported by the device.

  Read the article

• Scoping a home dev server

  - by AbhikRK

  Hi. I’m looking to build a multi-purpose home development server. In this post, I’m looking to outline what I want from such a system, and the ‘why’s of it, to some limited extent, and finally, some rudiments of how I’m looking to go about that. I’m mostly a developer, with just about some sysadmin familiarity. So, please excuse, correct me, and suggest on any ignorance which would come across in the following ;-) It will serve the following goals to start with:- NAS (Looking at using ZFS) Source control repo e.g Git server Database e.g MySQL server Continuous Integration e.g Hudson server Other stuff as and when they come up e.g RabbitMQ etc A development sandbox to play around with new stuff I want to achieve a high uptime for 2-5 as much as possible. They should run as independent services and with minimal maintenance. (e.g TurnKey Linux appliances) I’m thinking of running them as individual Xen DomUs. Then, maybe the NAS can be a Dom0 and 6 can be another DomU. The User for this would be mostly me. I can see 2-4 being sometimes used by 2-3 users, but that would be infrequent. I’m looking for a repeatable setup. Ideally I’d like to automate this setup through Chef or Puppet or something similar. Once everything runs, I want to be able to ssh/screen/tmux into 1-6 from my laptop or any other computer on the LAN/on-the-go. My queries are:- Is putting 1-6, all of them on a single box, a good idea? If so, what kind of hardware should I be looking at, for a low-cost, low-power setup? Although not at present, but in future I might be looking at adding audio/media servers to the mix. Would that impact the answers to 1? I have an old Pentium 3 and 810e motherboard combination. Is there any way I could put it to use? I had a look at the Sheevaplug, and was wondering if I could split off the NAS on its own using that. But ruled it out preliminarily due to its reported heating issues. Is it something i should still consider? Thanks in advance

  Read the article

• Scoping a home dev server

  - by AbhikRK

  Hi. I’m looking to build a multi-purpose home development server. In this post, I’m looking to outline what I want from such a system, and the ‘why’s of it, to some limited extent, and finally, some rudiments of how I’m looking to go about that. I’m mostly a developer, with just about some sysadmin familiarity. So, please excuse, correct me, and suggest on any ignorance which would come across in the following ;-) It will serve the following goals to start with:- NAS (Looking at using ZFS) Source control repo e.g Git server Database e.g MySQL server Continuous Integration e.g Hudson server Other stuff as and when they come up e.g RabbitMQ etc A development sandbox to play around with new stuff I want to achieve a high uptime for 2-5 as much as possible. They should run as independent services and with minimal maintenance. (e.g TurnKey Linux appliances) I’m thinking of running them as individual Xen DomUs. Then, maybe the NAS can be a Dom0 and 6 can be another DomU. The User for this would be mostly me. I can see 2-4 being sometimes used by 2-3 users, but that would be infrequent. I’m looking for a repeatable setup. Ideally I’d like to automate this setup through Chef or Puppet or something similar. Once everything runs, I want to be able to ssh/screen/tmux into 1-6 from my laptop or any other computer on the LAN/on-the-go. My queries are:- Is putting 1-6, all of them on a single box, a good idea? If so, what kind of hardware should I be looking at, for a low-cost, low-power setup? Although not at present, but in future I might be looking at adding audio/media servers to the mix. Would that impact the answers to 1? I have an old Pentium 3 and 810e motherboard combination. Is there any way I could put it to use? I had a look at the Sheevaplug, and was wondering if I could split off the NAS on its own using that. But ruled it out preliminarily due to its reported heating issues. Is it something i should still consider? Thanks in advance Have posted this question previously on SuperUser but no responses yet. So was wondering if this is a more apt forum for this.

  Read the article

• How do I stop Gimp from autolaunching on startup?

  - by Joshua Fox

  Gimp launches every time I log into Xubuntu (v. 13.10). Gimp is not shown under Settings Manager- Sessions and startup. It does not appear in ~/.config/autostart. I immediately close Gimp in these cases, so it is not running when I shut down the session. How do I stop Gimp from autolaunching on startup? Diagnostic Info: Note that cd / find . -name gimp.desktop Only produces ./usr/share/applications/gimp.desktop and nothing else Here is the output of grep -lIr 'gimp' ~/ ~/Gimp-search-results.txt sbin/vgimportclone home/joshua/.gimp-2.8/controllerrc home/joshua/.gimp-2.8/tags.xml home/joshua/.gimp-2.8/dockrc home/joshua/.gimp-2.8/gimprc home/joshua/.gimp-2.8/themerc home/joshua/.gimp-2.8/templaterc home/joshua/.gimp-2.8/gtkrc home/joshua/.gimp-2.8/sessionrc home/joshua/.gimp-2.8/toolrc home/joshua/.gimp-2.8/pluginrc home/joshua/.gimp-2.8/menurc home/joshua/Gimp-search-results.txt home/joshua/.local/share/ristretto/mime.db home/joshua/.wine/drive_c/windows/system32/gecko/1.4/wine_gecko/dictionaries/en-US.dic home/joshua/.wine/drive_c/windows/syswow64/gecko/1.4/wine_gecko/dictionaries/en-US.dic home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,skype,,0495938f41334883bd3a67d3b164c1d1 home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,gnome-utils,,91bba9b826fb21dbfc3aad6d3bd771cb home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,icedtea-plugin,,7bb5e4ad0469ef8277032c048b9d7328 home/joshua/.cache/software-center/piston-helper/reviews.ubuntu.com,reviews,api,1.0,review-stats,any,any,,1c66e24123164bb80c4253965e29eed7 home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,wine1.4,,2bac05a75dcec604ee91e58027eb4165 home/joshua/.cache/software-center/piston-helper/software-center.ubuntu.com,api,2.0,applications,en,ubuntu,saucy,amd64,,32b432ef7e12661055c87e3ea0f3b5d5 home/joshua/.cache/software-center/apthistory.p home/joshua/.cache/software-center/reviews.ubuntu.com_reviews_api_1.0_review-stats-pkgnames.p home/joshua/.cache/oneconf/861c4e30b916e750f16fab5652ed5937/package_list_861c4e30b916e750f16fab5652ed5937 home/joshua/.cache/sessions/xfwm4-23e853443-fb4b-42fd-aa61-33fa99fdc12c.state home/joshua/.cache/sessions/xfce4-session-athena:0 home/joshua/.config/abiword/profile

  Read the article

• How to Access Your Router If You Forget the Password

  - by Chris Hoffman

  Routers protect their web interfaces, where you can configure their networking, parental control, and port forwarding settings, with a username and password. These default passwords can be changed to protect the router’s settings. If you’ve forgotten a router’s password – or if you acquired a used router and don’t know its password – there’s a way to reset the password. You may also be able to forward ports without knowing the password. Image Credit: tnarik on Flickr How to Access Your Router If You Forget the Password Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor

  Read the article

• Create an ad-hoc connection that looks like a wifi connection from a router

  - by James

  I have a Vizio tablet (running a modified version of Android 2.3.2) which, for some reason or another, refuses to list Windows ad-hoc wifi connections on it's wifi connection screen. It can connect to wifi networks served from a normal router, but the wireless bit of my home router is broken, so I'd like to share the internet connection through my laptop's wifi card until the new router arrives. Is it possible to create an ad-hoc network in Ubuntu that looks like a normal wireless network to my tablet?

  Read the article

• Ubuntu Desktop on PC as an IPv6 router?

  - by Cliff

  I have a DELL PC with Ubuntu 12.10 and a pandaboard running the latest linaro ubuntu 12.08. The Ethernet on the panda board is reporting 'no ipv6 router present' regardless of what router I connect (they are all probably not ipv6). I can connect via a cross-over Ethernet cable the pandaboard to the DELL PC. Can I setup the DELL PC to act as an IPv6 router. the PC has a wireless connect to our router/ADSL box. I would Really appreciate some help here so if you have an alternative please suggest it.

  Read the article

• Why from a virtualized Ubuntu system I can't discover the ip address of my router?

  - by AndreaNobili

  I am not into computer network and I have the following problem finding my router IP address. I have a Windows 8 PC on on which it is installed VmWare Workstation that virtualizes Linux Ubuntu. The network adapter settings of this Virtual Machine is setted as NAT. Now my problem is that if in the Windows 8 DOS shell I perform the ifconfig statment I obtain C:\Users\Andrea>ipconfig Configurazione IP di Windows Scheda Ethernet tap0: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: techub.lan Scheda Ethernet Connessione di rete Bluetooth: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda LAN wireless Connessione alla rete locale (LAN)* 11: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda LAN wireless Wi-Fi: Suffisso DNS specifico per connessione: DSL2750B Indirizzo IPv6 locale rispetto al collegamento . : fe80::89ff:6d12:49cf:4354%13 Indirizzo IPv4. . . . . . . . . . . . : 192.168.1.3 Subnet mask . . . . . . . . . . . . . : 255.255.255.0 Gateway predefinito . . . . . . . . . : 192.168.1.1 Scheda Ethernet Ethernet: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda Ethernet VMware Network Adapter VMnet1: Suffisso DNS specifico per connessione: Indirizzo IPv6 locale rispetto al collegamento . : fe80::edb3:8352:f954:2b0c%23 Indirizzo IPv4. . . . . . . . . . . . : 192.168.129.1 Subnet mask . . . . . . . . . . . . . : 255.255.255.0 Gateway predefinito . . . . . . . . . : Scheda Ethernet VMware Network Adapter VMnet8: Suffisso DNS specifico per connessione: Indirizzo IPv6 locale rispetto al collegamento . : fe80::d00b:8c6e:98b:f1ec%24 Indirizzo IPv4. . . . . . . . . . . . : 192.168.15.1 Subnet mask . . . . . . . . . . . . . : 255.255.255.0 Gateway predefinito . . . . . . . . . : Scheda Tunnel Teredo Tunneling Pseudo-Interface: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda Tunnel isatap.techub.lan: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: techub.lan Scheda Tunnel isatap.{5B95051D-79AB-4147-92CF-3A2E16698432}: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda Tunnel isatap.{340A5FAD-1597-402E-B658-29C37E8F7BC2}: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda Tunnel isatap.DSL2750B: Suffisso DNS specifico per connessione: DSL2750B Indirizzo IPv6 locale rispetto al collegamento . : fe80::5efe:192.168.1.3%26 Gateway predefinito . . . . . . . . . : So, looking at the previous output it appear clear that the default gateway (my router) is: 192.168.1.1, infact if I open it into a browser it apear to me the login mask to enter in the router settings.... Ok, if now I open the virtualized Ubuntu shell and perform the route command I obtain this output: andrea@andrea-virtual-machine:~$ route Tabella di routing IP del kernel Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.15.2 0.0.0.0 UG 0 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 192.168.15.0 * 255.255.255.0 U 1 0 0 eth0 So, here it say to me that the default gateway is 192.168.15.2 (that is not my router ip address), why? My idea is that it could depend by the NAT. Because my Windows system is connected using the wireless but in the virtualized Ubuntu I see that I am connected to a "wired network". So I think that the NAT virtualize a network adapter (or something like this) and that 192.168.15.2 could be the ip address of this network adapter... But it seems strange to me because, as you can see in the previous ipconfig output the VmWare network adapter addresses are: 192.168.129.1 and 192.168.15.1. So I have also 2 others doubts: 1) What device represents the 192.168.15.2 ip address that the virtualized Ubuntu see as Default gateway but that is not my router? 2) What exactly do the two VmWare network adapter that I have configured into my Windows 8 system? There is a way to discover my router ip from the virtualized Ubuntu system ? Tnx Andrea

  Read the article

• How to connect computers to a network printer behind a router?

  - by kokbira

  General question: How to connect computers to an IP printer behind a router? Particular question: How to connect C-1 and C-2 to PRI? What? Where? [ISP] | | -> IPs:200.X.X.X/other configs:DC | [R-1] | | -> IPs:10.1.X.X locked by MAC,M:255.0.0.0,G:10.1.0.1 |¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯| | | [PRI] IP:10.1.7.7 [R-2] IP: 10.1.0.1,MAC:A | | -> IPs:192.168.1.X,M:255.255.255.0,G:192.168.1.1 |¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯| | | [C-1] IP:192.168.1.2 [C-2] IP:192.168.1.3,MAC:A Glossary and details: ------------------------------------------------------------------------------------ - IP: IP. - IPs: Some IP range. - M: Mask. - G: Gateway. - MAC:A: A MAC address that I will not inform you :) - DC: Don't care. - ISP: Internet Service Provider (not so much details about it on that case). - R-1: A real router or some concatenated so IP range bellow that block is 10.1.X.X and above is ISP. The provided IPs are provided by MAC. As all available addresses are in use, you must clone an existing one to join with a new device (and to disconnect the cloned one). - PRI: An network printer (some people here call that IP printer). - R-2: A TP-LINK TL-WR340G, mine wireless router (since my computer does not have ethernet input, it is my ethernet-wifi adapter :), admin access, MAC address cloned from C-2 (MAC:A). I've to configure 10.0.1.1 and 10.0.1.2 as DNS addresses, other wise I cannot connect C-1 and C-2 to Internet. - C-1: My computer, a CCE XLE-425 (remember: no ethernet input), with Windows 7, admin access. - C-2: another computer with better configs than mine, MAC:A, Windows XP. Requirements: I want to print, to access Internet and to do it myself (no need to call network admin men in black people). Pay attention to MAC clones and DNS info.

  Read the article

• How can I determine the IP addresses allocated by DHCP on a router that I'm connected to?

  - by user234831

  This "router" is not a typical situation. I'm using my phone as a hotspot and can only configure a select number of DHCP options. I can manage the limit on how many devices/clients can use my phone as a hotspot. I have to select from a radio-button list with the options: 2,3,4,5, or 8 I can specify the DHCP starting IP address. In this case, it begins at 192.168.6.106 When I'm connected via WIFI to my phone, an ipconfig /all command shows me that the default gateway is 192.168.6.1 and my IPv4 address is 192.168.1.148. I have the luxury of connecting another device to the phone and that device was assigned 192.168.1.121. I've tried connecting to 192.168.6.1, hoping for some sort of router setup page that I'm used to seeing, but there is no such thing or maybe it's just a matter of incompatable operating systems. In summary, the "router" (phone) has an IP address of 192.168.6.1 and a DHCP server that begins at 192.168.6.106 and allows up to 8 connections. Normally, I would assume a range of 192.168.6.106 - 192.168.6.113, but connected clients are showing otherwise. How can I figure out which IP addresses are set aside by DHCP for clients?

  Read the article

• Bizarre and very specific Internet connection loss

  - by Synetech

  Yesterday (Friday, September 21, 2012), my Internet connection started acting up. After some testing, I confirmed a very specific and baffling set of symptoms: Internet connection goes away every 25-35 minutes (I did not confirm the exact interval, but it seems to be about 30 mins.) Only some protocols are affected; HTTP*, P2P, etc. stop working; FTP, etc. continue to work When it’s stopped, cannot even ping router or cable-modem IPs or view their firmware pages Domain-names and IPs are irrelevant (for protocols that stop working, neither work, for those that still work, both work) Resetting router fixes it for another 30 minutes Keeping the connection idle or active doesn’t seem to make a difference (nor the bandwidth usage in that period) Connecting directly to cable-modem allows it to work indefinitely Disconnecting the router from the cable-modem works indefinitely (no Internet connection obviously, but can still access router IP and firmware page) Connecting the router to the cable-modem, but putting the modem on standby also works indefinitely Same problem with both a wireless laptop and wired (on any port) desktop (both Windows 7; will try to test Windows XP when possible) Nothing had changed in the days leading up to the issue. No modifications to the networking configuration or the router; there were not even any Windows updates except for an MSSE definition update. Waiting does not fix it, nor does any amount of fiddling with anything; only resetting the router fixes it for 30 minutes (resetting the cable-modem doesn't work either) I tried cleaning the pins in the router’s plugs, but that didn’t help, which was not really a surprise since I was not getting a lost connection error. Obviously my first thought was that the router was having a problem, and this is borne out by some tests. The problem is that when it drops, it is not a full drop since I can still do things like ftp ftp.mcafee.com and such which means that the connection and DNS are still working. Moreover, if it were the router, then why does it stay alive indefinitely when not connected to the cable-modem (i.e., no outside influence)? The problem doesn't seem to be either the cable-modem nor the router, but rather an interaction between the two, like something from the outside (port scan? hacker? ISP?) that is triggering a problem in the router. I see that there have been a couple of vulnerabilities for the DI-524, but those were a while back and should be fixed since I have the last firmware for it. I don’t think it’s my ISP (Rogers) since I have been using the router for several years without problem and can connect indefinitely when bypassing it. But I can’t rule them out since that is one of the only possible things that could have suddenly changed. Does anybody have any ideas of explanations, fixed, or tests? (I note that when I opened the router, I heard a very high-pitched noise from somewhere near the capacitors/ferrite ring which I don’t think I heard the last time I opened it a few years ago, but then if it were that, then why would it affect only a very small, specific set of functions?)

  Read the article

• how does a computer know which IP address will route information to the internet? [closed]

  - by JohnMerlino

  Possible Duplicate: How does IPv4 Subnetting Work? For example, I have a computer with a Network Inteface Card (NIC) which is an Ethernet card that is connected by Ethernet cables to a router. There is also another computer with a cable that is connected in another port of the router. This is a Belkin router operating over an Ethernet in the LAN. When I connect to serverfault.com, it maps to an IP address. My computer now has a task of connecting to that IP address. But my computer itself cannot connect to the serverfault IP address. Only the router can. So the task of my computer is to find the IP address associated with the node that will do the routing to the public internet. How does my computer know that a particular IP address in the local network belongs to the router, and is not another computer connected to the network? Is this information configured manually in the operating system itself? Somehow my computer must know that it must send ethernet frames to the router with the expectation that the router will then send the packet to a public IP. How does it know to send it to the router? Is the router's ip address stored in my computer like a key/value pair e.g. "router"="192.168.2.6", so that when I put a public ip address, my computer first knows to connect to 192.168.2.6?

  Read the article

• Setting up dual wireless routers

  - by JasCav

  I have two wireless routers (one is the router supplied by Verizon - MI424-WR ActionTek and the other is DD-WRT Buffalo router). I want to set them up so that I have the second router (Buffalo) on its own subnet and two SSIDs so I can put different devices on different routers and so I can put my web server on the first router and put most of my other computers behind the second router for a little extra protection in case of a compromise. From my understanding, I have to hook the two routers together so that the LAN from the Verizon router plugs into the WAN port of the Buffalo router. This is where I get stuck. What settings do I need to look for to setup the Buffalo on its own subnet? Do I need to do anything with the Verizon router, or are the configuration changes done to the Buffalo?

  Read the article

• What strategy do you use to sync your code when working from home

  - by Ben Daniel

  At my work I currently have my development environment inside a Virtual Machine. When I need to do work from home I copy my VM and any databases I need onto a laptop drive sized external USB drive. After about 10 minutes of copying I put the drive in my pocket and head home, copy back the VM and databases onto my personal computer and I'm ready to work. I follow the same steps to take the work back with me. So if I count the total amount of time I spend waiting around for files to finish copying in order for me to take work home and bring it back again, it comes to around 40 minutes! I do have a VPN connection to my work from home (providing the internet is up at both sites) and a decent internet speed (8mbits down/?up) but I find Remote Desktoping into my work machine laggy enough for me to want to work on my VM directly. So in looking at what other options I have or how I could improve my existing option I'm interested in what strategy you use or recommend to do work at home and keeping your code/environment in sync. EDIT: I'd prefer an option where I don't have to commit my changes into version control before I leave work - as I like to make meaningful descriptive comments in my commits, committing would take longer than just copying my VM onto a portable drive! lol Also I'd prefer a solution where my dev environment stays in sync too. Having said that I'm still very interested in your own solutions even if they don't exactly solve my problem as best as I'd like. :)

  Read the article

• Iphone sdk 4 home button minimizes the app

  - by sukitha

  Hi, i have created a small app using the sdk 4, app works perfectly fine, but when the user hits the home button to exit and when he comes back, the app doesn't go to the home screen, it continues from the state (screen) which the user hit the home button. How can I reset it?

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >