Search Results

Search found 17267 results on 691 pages for 'home router'.

Page 31/691 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• Why such a dramatic difference in wireless router max. simultaneous connections?

  - by Jez

  Recently, I've needed to look into buying a wireless router for a mission-critical system at work that will need to support quite a few simultaneous connections (potentially a few hundred laptops). One thing I've noticed is that there seems to be a dramatic difference between the max. simultaneous connections different routers can support; see this page for example - anything from 32 to 35,000! Why is there this degree of difference? You'd have thought that if we know how to make routers that can handle thousands of connections, we wouldn't be making stuff that's limited to a pathetic 32 anymore. Is it a firmware thing? A hardware thing? Are low-end manufacturers purposely putting low arbitrary connection limits in so people can be "encouraged" to pay more for high-end routers?

  Read the article

• Install wireless router with cable modem - need authentication server?

  - by Paul

  I've bought a wireless router which I'm installing with a Telstra BigPond cable modem for a friend. As part of the setup I've got to a screen requesting username / password / authentication server for the cable modem They have contacted Telstra who supply the username / password and say that is all they need. They dont know anything about an authentication server. There are a couple of answers up on Whirlpool forum found through google but those answers are 4 years old. http://forums.whirlpool.net.au/forum-replies-archive.cfm/475258.html http://forums.whirlpool.net.au/forum-replies-archive.cfm/479615.html I havent tried them yet as I hoped to get actual answers before trundling over to my friends house again. Can anyone suggest, How to get information from Telstra support? (I realise this question maybe impossible to answer) What is the authentication server for Telstra BigPond for a user in Sydney Australia Are those whirlpool forum answers still valid? I guess if I dont get anything more here I'll try what it says on whirlpool and see what happens.

  Read the article

• DD-WRT Router Can't hold a connection after initial setup...

  - by AC

  Struggeling with my new DDWRT router (Buffalo WZR-HP-G300NH) configuration. I configured it using one machine while comparing the settings on my existing Linksys WRT54GL on another machine. To the best of my knowledge, I've set it up the same way as my Linksys, but DDWRT has so many other options. After configuring it, I plugged it into the modem, VOIP device & my network. I see the phones come back online. However after a few minutes, it seems I lose the outbound connection (phones die and I can't get out over HTTP). What's confusing me is it works for a few minutes, then it fails. No idea what to look for. Ideas?

  Read the article

• How do I backup (from Vista Home Premium) to a FAT32 HDD connected to a wireless router with no user account or password set?

  - by Scubadooper

  I have a Seagate expansion 2TB HDD which I've managed to get working on my wireless router (thanks to fat32format) however I haven't managed to set my backup to work with it. Vist Home Premium requires that I input a username and password in the backup utility. As far as I'm aware that type of access control isn't set on the HDD: Can I set up the access control on the HDD? If so how Or, can I set the backup to work without it? If so how Thanks for your help, I haven't been able to find the answer anywhere on the net so far

  Read the article

• Server IP must be a LAN IP (Port Forwarding Netgear Router)? [closed]

  - by rphello101

  I'm trying to set up a server (Apache) on my computer (fairly new to it). As I understand it, for it to be accessible to other computers, I need to forward port 80. When I try to forward the port though, I get the error: Server IP must be a LAN IP. I noticed in ipconfig that my default gateway is different than my wireless router. My computer is not hardwired, not on WiFi. Furthermore, I do not, at this point, have a static IP. I read that it should still work with a dynamic IP until it changes. Any ideas on what I can do? I'm using Windows 7 in case it matters.

  Read the article

• What Device/System to use as a "router on a stick"

  - by Jeff Leyser

  I need to create several distinct VLANs, and provide a way for traffic to move between them. A "router on a stick" approach seems ideal: Internet | Router with Trunking Capability ("router on a stick") * * Trunk between router and switch * Switch with Trunking Capability | | | | | | | | | | | LAN 2 | LAN 4 | | 10.0.2.0/24 | 10.0.4.0/24 | | | | LAN 1 LAN 3 LAN 5 10.0.1.0/24 10.0.3.0/24 10.0.5.0/24 We have trunk-capable Layer-2 switches. The question is what to use as the router on a stick. My choices seem to be: 1) Use an existing Cisco 5505 ASA firewall. It appears the ASA can do the routing, but it's a 100Mbps device, and so seems sub-optimal at best 2) Buy a router. This seems overkill. 3) Buy a Layer-3 switch. Also seems overkill. 4) Use an existing Linux Box as a router 5) Use a new Linux box as a router' 6) Something I'm not thinking of I think either (4) or (5) is my best option, but I'm not sure how to choose between them. I expect the amount of traffic that has to cross the VLANs to be somewhat small, but bursty. How much load does routing add to a CentOS machine?

  Read the article

• Show both routers SSID with Wireless bridge [closed]

  - by Valter Henrique

  I have two router 'GVT-1' (the main router) and 'GVT-2' (the second router), this seconds router is used as a repeater only, so I setup a wireless bridge but after I did that it only show 'GVT-2' and if I go closer the 'GVT-1' the signal gets weak cause I'm far from the second router. What I wish is to had the same connection with a wide signal, there's something that I cand do about it ? Thanks.

  Read the article

• All internet requests in Windows time out

  - by Brandon

  So, I've run into a very strange problem with my home wireless network. Previously, at seemingly random times, the router seemed to disconnect all wireless hosts and cause all of the wired hosts to have a "limited connection" according to windows. In order to fix this, I had to unplug all of the wired hosts from the router, unplug the modem from the router, and power cycle the router. This seemed to solve the problem for a while until the exact same thing happened a day later and I had to go through the same process again. That's where I noticed something weird happening. There was one wireless host (a Windows Vista laptop) that seemed to be causing the router to disconnect the other hosts whenever it connected. When this happened, only that laptop was able to use the wireless from the router. When this happened, I disconnected it from the wireless (by disabling the wireless adapter) then reconnected it (by re-enabling it) and now it, like the other hosts, couldn't connect. I've never really seen anything this strange happen on our network before. So, I restored the router to factory settings and the problem seems to have vanished except one crucial problem. There's another host (a Windows 7 laptop) that was perfectly able to connect before all of the router issues and even in between the crashing and power-cycling events but now says its connected and says it's able to reach the Internet, but all requests time out. In any browser I've tried, the tab says connecting to [site]... for a solid minute and then tells me the request timed out. When I try to ping google.com in cmd it also says request timed out. In frustration, I booted into a dual-boot Ubuntu installation on the Windows 7 host and the connection works fine, to my surprise, as ubuntu is where I am now typing this rather long question. I haven't looked through the event log in windows but will post anything I find in an edit I haven't tried connecting (in Windows 7) to any other wireless network, since The fact that it works in Ubuntu suggests its Windows and not the router but I didn't change any wireless settings in windows before it being able to reach the Internet and not. Does anyone have any clue what could have happened. I opened to buying another router as this one is almost a year old :) but I would like to know whats going on here. Thanks in Advance! P.S. Sorry for how long my question is, I'm a little anxious (:

  Read the article

• can't find ip of wifi acess point

  - by Crash893

  I setup an wireless AP (linksys wifi router) to have no dhcp and point to the main router as the default gateway. I also set it up to obtain a ip from the network but when i go to my main router and look for it i don't see any ip's that it could be If i use net stumbler i can see the mac address of the wifi portion of it but Im at a loss how to get into the web console of this router any ideas on how to "find" this router?

  Read the article

• Is there any reason to subnet a home network?

  - by Will

  For networks I understand we set a netmask on each computer to let it know what IPs it can talk to without going through the router - IPs on the same subnet can talk directly to each other and do not have to go through a router/switch. However, in today's home networks (and I suspect corporate networks as well) every computer is connected to a router/switch (at the low cost of today's hardware I doubt there it much of a market for wired repeaters/hubs). This seems to obviate the need for a subnet mask and subnetting. Considering that in most modern home architectures every computer goes through the router, even to talk to computers on the same network, is there any reason for me to subnet a home network?

  Read the article

• Can I run a web site from my home network without jeapordizing other computers on my LAN?

  - by Alchemical

  I have a home LAN with 5 computers and a NAS, all connected to a Linksys router which is connected to my Cox cable modem. I'm interested in having one of my computers run an IIS-based web site and to have it be accessible to the internet with a static IP. However, I do not want o jeapordize the safety of the other computers on my home network! Is there anyway to do this safely, or as safe as possible? I may also like to run an FTP server from this computer. Finally, optionally I would like to allow remote access to this computer from the internet--but it seems to me that that may increase the security risk to the other computers substantially.

  Read the article

• Can I use a Windows Server 2003 Domain Controller but my home router for DNS?

  - by NetworkingWannabie

  Hi All Probably easiest to start with a description of my current setup, which works (oh, and this is a home setup not an office or anything): I have an ADSL modem with a static IP address (192.168.128.1), and its DHCP capability is disabled. I have a permanently powered up Windows Server 2003 machine with a fixed IP (192.168.128.2) which provides my domain controller, dhcp, and dns. The default gateway for everything is my ADSL modem everything is setup to use the WS2003 machine as the primary DNS with the ADSL modem as Secondary DNS just in case the server goes down (everything includes the server itself). Lastly, just in case it's relevant, I have my DHCP leases set to infinite (or whatever the right term is). Everything is pretty hunky dory. Except, that is, for the fact that my server is ALWAYS on, and it isn't always used, so I'm burning juice that I don't need to - my server burns around 120W which isn't immense but isn't irrelevant either, so I'd like to put it into a stand-by state when it isn't being used (the more standby the better) and then get the clients to wake it up. Am I correct in assuming that this won't work at the moment - A given client would need an IP address to wake the machine up, and it needs to machine to be awake to get an IP - catch 22? Assuming I'm correct, can I move to using my router (which is always on) for DHCP? What impact will this have on DC and DNS? Alternatively, does anyone have a better way for me to achieve this? Can I get the server to wake up when it sees clients look for a DHCP server, etc? Wow, that came out longer than expected! Thanks for your help.

  Read the article

• Router in taskflow

  - by raghu.yadav

  A simple one of usecase to demonstrate router usage in taskflows with only jspx pages ( no frags ) main page with 2 commandmenuItems employees and departments. upon clicking employees menuitem should navigate to employees page and similarly clicking department menuitem should navigate to department page, all pages are in droped in there respective taskflows. emp.jspx dep.jspx emp_TF.xml dep_TF.xml mn_TF.xml ( main taskflow calling emp and dep TF's through router ) adf-config.xml ( main page navigates to mn_TF.xml ). Here is the screen shots..

  Read the article

• Trial Marketing and SEO For Your Home Based Business Opportunity

  Home based business opportunities can be run more efficiently if you use free resources to check keywords. A legitimate home business takes work to achieve and with these tools to optimize search engine optimization (SEO) a home based business idea can become a very strong Internet home business.

  Read the article

• Small Business Networking: 6 Essential Router Features

  A small business network needs more security and features than a typical consumer router can provide. Here's our take on the six must-have features to look for in a small business router.

  Read the article

• Small Business Networking: 6 Essential Router Features

  A small business network needs more security and features than a typical consumer router can provide. Here's our take on the six must-have features to look for in a small business router.

  Read the article

• How to install new system (with new applications) without removing /home

  - by Innuendo

  I'd like to update to 11.04 from 10.10 (but I don't like upgrading system, I prefer full reinstalling) I'd like to install whole new system, but I want to keep my /home folders (Music, Movies, Documents and so on). If I keep /home while installing - this will keep all my program settings too (but I have lots of trash there too, and 'd like to clean it too). Can I delete all .folders in /home and then reinstall system (keeping old /home) ?

  Read the article

• Locked out of our Comcast Business Gateway for seemingly no reason

  - by Tyler

  A little backstory... Last fall we migrated our ISP from AT&T to Comcast at one of our offices. At that time, we received a new modem/router from Comcast and we configured everything to our liking. We've never really had very many issues with the router aside from having to restart it every once in a while. Here's the problem... About three months ago I changed the password on the router from the default. After that, I logged into the router several times to make changes with no issue. During May I logged into the router to add two new static routes, no problems. A week ago, I tried to log into the router and could not. I tried the non-default password that I changed it to, the default, anything and everything I could think of and no luck. I restarted the router on Monday thinking it may just be locked up, but after the restart it would still not let me log in. This router is at our other office about 2 hours from here and I want to avoid having to drive down there and reset to factory defaults, reconfigure, etc. Any ideas?

  Read the article

• I can get in, but I can't get out

  - by robwilkerson

  Like most technical folks, I suppose, I'm my family's primary source of tech support. I'm a developer--not a sysadmin--by trade and tonight I bumped into something I've never seen before. I'm hoping someone here has. In order to better help my Mom, I have her set up on a home network behind a Linksys router (WRT54G). She's got a Mac, so I have her router set up to forward SSH requests to her laptop's internal IP. I also have her router running DDNS through DynDns. Tonight she called to tell me that she can't access the Internet. Assuming it was one of the many simple, stupid problems most of us encounter with parents, I logged into the router admin remotely and took a look around. Everything looked normal. Then I SSH'd into her machine to check out her IP, DNS, etc. settings. Everything still looked fine. Then I noticed something weird. When SSH'd into her machine, I can't ping her router. In other words, I seem to be able to access her computer through her router, but not access her router from her computer. A traceroute dies immediately as well. Any ideas what I might try next? I've bounced her computer and even unplugged her router (it was plugged back in, of course). Thanks.

  Read the article

• I can get in, but I can't get out

  - by robwilkerson

  Like most technical folks, I suppose, I'm my family's primary source of tech support. I'm a developer--not a sysadmin--by trade and tonight I bumped into something I've never seen before. I'm hoping someone here has. In order to better help my Mom, I have her set up on a home network behind a Linksys router (WRT54G). She's got a Mac, so I have her router set up to forward SSH requests to her laptop's internal IP. I also have her router running DDNS through DynDns. Tonight she called to tell me that she can't access the Internet. Assuming it was one of the many simple, stupid problems most of us encounter with parents, I logged into the router admin remotely and took a look around. Everything looked normal. Then I SSH'd into her machine to check out her IP, DNS, etc. settings. Everything still looked fine. Then I noticed something weird. When SSH'd into her machine, I can't ping her router. In other words, I seem to be able to access her computer through her router, but not access her router from her computer. A traceroute dies immediately as well. Any ideas what I might try next? I've bounced her computer and even unplugged her router (it was plugged back in, of course). Thanks.

  Read the article

• Why might one host be unable to access the Internet, when it can ping the router and when all other hosts can?

  - by user1444233

  I have a Draytek Vigor 2830n. It's kicking out a 192.168.3.0 LAN. It performs load-balancing across dual-WAN ports, although I've turned off the second WAN to simplify testing. There are many hosts on the LAN. All IPs are allocated through DHCP, most freely allocated from the pool, but one or two are bound to NIC MAC addresses. All hosts can access the Internet, save one. That host (192.168.3.100 or 'dot100' for short) gets allocated an IP address (and the right gateway address, DNS server addresses, subnet etc.) dot100 can ping itself. It can ping the gateway, and access the latter's web interface via port 80. It's responsive and loss-free (sustained ping over a couple of minutes reports no data loss). Yet, for some reason that evades me, dot100 can't ping an external IP address or domain name. I suspect it's never been able to, because it was getting some Internet access from a second adaptor (different subnet), but that's now been turned off, which exposed the problem. In dot100, I've tried: two operating systems (Windows 8 and Knoppix), to rule out anti-virus programs etc. two physical adaptors two cables, on each adaptor two IPs (e.g. .100 and .103 assigned by Mac and .26 from the pool) both dynamic and assigned (MAC-bound) DHCP-allocated IPs but none of this experiments yielded any variation in the result. dot100 is a crucial host. It's a file server for the network, so I need it to be reliably allocated a consistent IP. Can anyone offer a potential solution or a way forward with the analysis please? My guess My analysis so far leads me to believe it's a router issue. I've checked the web interface very carefully. There are no filters setup in Firewall - General Setup or Filter Setup. I suspect it's a corrupted internal routing table, but the web UI shows this as the Routing table: Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 62.XX.XX.X WAN1 * 62.XX.XX.X/ 255.255.255.255 via 62.XX.XX.X WAN1 S 82.YY.YYY.YYY/ 255.255.255.255 via 82.YY.YYY.YYY WAN1 C 192.168.1.0/ 255.255.255.0 directly connected WAN2 C~ 192.168.3.0/ 255.255.255.0 directly connected LAN2

  Read the article

• Configuration Of modem/router to Telnet IPV6 addr

  - by vito

  Can any one help me to configure the modem/router, so that IPV6 address assigned by modem/router to Pc. I should telnet to that IPV6 address so that i can open the modem/router administration user interface. Now I have enabled the IPV6 in my PC, i am getting a IPV6 address from Modem/router. But not able to telnet to IPV6 address given by modem/router. It is possible to telnet to IPV6 address given by modem/router. I have tried it before. But now i have forgotten the configurations. Configuration snapshot has been attached. Thank you. configuration snapshot

  Read the article

• trying to set up wireless router, failing

  - by j j

  Hi, I am trying to set up Netgear's wireless-n WNR2000 router, following their oversimplified 5- step process for plugging in wires, and I'm not having any success. It comes down to: once everything is wired and turned on in the correct order, all of the LEDs match the image they give of 'what should be lit up', but their setup disk still doesn't find the router. They have a site to set up the router manually, www.routerlogin.net, which I cannot navigate to, even while wired directly to the router. http://192.168.1.1 doesn't connect to anything, either. The interesting part: i get ping replies from Google's DNS server at 8.8.8.8 while this is set up. but cannot connect to any web site by name, since the router's DNS isn't set up. One thought is that the router and modem both have the same IP address, so it's conflicting, but I'm not sure how I'd resolve that. Any ideas?

  Read the article

• Share laptop wifi with router

  - by obie

  I hi guys i'm trying to accomplish something: i have a modem (ADSL) which servers as a wireless router as well. There's a laptop connected to it through cable. On the other room i have a laptop which is connected through the router wirelessly. Now the problem is, since i have other appliances that need to get connected but are not wifi cable i have another wifi router. What i want to know is how can i share the second laptop's wifi with the second router so that the router can then serve as an access point to give internet to my other applinaces through ethernet cables. so in breaf i want: INTERNETMODEM (WIFI)LAPTOP 1 (WIFI)LAPTOP 2 (WIFI)Router 2 (ETHERNET)DREAMBOX & WDTV

  Read the article

• Software installed on root partition or on home partition

  - by Tim

  I am planning to install some big softwares such as Matlab (4GB), Mathematica (4GB) on my Ubuntu partitions. I was wondering if I installed them on my home partition, when I reinstall Ubuntu without touching the home partition, will the softwares still be runnable after reinstallation? what are the advantage and disadvantages of installing softwares on root partition and of on home partition? with your answer to the previous questions, what are some reasonable plans for the sizes of root partition and of home partition? Note that I would like to learn programming in C, C++, Java, Python, Lisp, databases under both Ubuntu and Windows, and no games. My laptop has around 230 GB, where I plan to install both Windows and Ubuntu, and reserve 40 GB for Ubuntu (three partitions: swap, root and home), 110 GB for NTFS partition shared between the two OSes, 70 GB for Windows OS partition, and 10 GB that can be added to any of the above partitions. I will change my plan according to your suggestions. Thanks and regards!

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >