Search Results

Search found 8343 results on 334 pages for 'laptop disasters'.

Page 271/334 | < Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >

• Atheros wireless not working

  - by Chandru1

  I have been struggling hard since i have installed Ubuntu 10.10 but it has been difficult for me to get my wifi working. So here is what i tried. First i checked whether i have the driver using the ifconfig command and it shows the wireless lan driver as wlan0. Next, i tried the command iwlist wlan0 scanning by becoming the root which gave me the output as no scan results. Next, i visited this link https://help.ubuntu.com/community/WifiDocs/Driver/Atheros to see as to what problem my laptop may have. I do own have an ath5k chipset. And as i followed the instructions in the above link in one of the blacklist-ath_pci.conf file had this written in it. For some Atheros 5K RF MACs, the madwifi driver loads buts fails to correctly initialize the hardware, leaving it in a state from which ath5k cannot recover. To prevent this condition, stop madwifi from loading by default. Use Jockey to select one driver or the other. (Ubuntu: #315056, #323830 I am not that good at Linux but i have given it a try. I am desperate to have my wifi working and i would be glad if this community could help. ADDED: If anyone would like to know as to what drivers i am using this is the output. network description: Wireless interface product: AR2413 802.11bg NIC vendor: Atheros Communications Inc. physical id: 3 bus info: pci@0000:0a:03.0 logical name: wlan0 version: 01 serial: 00:19:7d:d3:0c:fd width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath5k driverversion=2.6.35-24-generic firmware=N/A latency=168 link=no maxlatency=28 mingnt=10 multicast=yes wireless=IEEE 802.11bg resources: irq:18 memory:d0000000-d000ffff Some more information and output as to what i have done. lsmod | grep ath ath5k 130083 0 mac80211 231541 1 ath5k ath 8153 1 ath5k cfg80211 144470 3 ath5k,mac80211,ath led_class 2633 1 ath5k

  Read the article

• Cannot make Wi-Fi hotspot

  - by Junaid

  I want to make my laptop as wi-fi hotspot. To do so, I pressed button Settings-Network-Wireless-Use as Hotspot.. Then it creates a wireless network connection 'Hostspot' and connects. But it gets disconnected just after making connection. Here is my network hardware info: sudo lshw -C network *-network description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=8.83.5.1 build 33692 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:47 memory:d9200000-d9201fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=192.168.1.4 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:45 ioport:2000(size=256) memory:d5010000-d5010fff memory:d5000000-d500ffff memory:d5020000-d502ffff My machine is running on Ubuntu 11.10 Can anybody help in it? Thanks

  Read the article

• OpenVPN, Server 12.04, connect to machines in home LAN behind VPN server

  - by inexion

  Problem: I've set up a working OpenVPN server, and am able to connect to it from anywhere using my mac laptop and tunnelblick. When I connect in, I'm assigned an IP address of 10.8.0.x, the server is 10.8.0.1, so I have no problems SSHing into it. Once SSHd in, I can even ping other machines (obviously) on my home network (192.168.1.x). Desired outcome: What I want, is, to connect to the VPN server, and instead of getting a 10.8.0.x address, I get a 192.168.1.x on my home network. I can't figure out how to talk to the OTHER machines on my home network WITHOUT being SSHd in to the VPN server. I'd like to just connect to my VPN server, then be a part of my home network. Attempted solutions: I've read that I need to set up routes, and/or enable IP forwarding. I enabled IP forwarding using sudo sysctl -w net.ipv4.ip_forward=1 and that doesn't seem to have done anything. I've also uncommented a line in the OpenVPN's server.conf file: # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. push "route 192.168.1.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" But still no luck, I still get a 10.8.0.x address... I've also read I may have to add routes to the router itself, but haven't tried that. Any help appreciated, thanks!

  Read the article

• wynapse.com down last night, SC tonight

  - by Dave Campbell

  In an industry segment that nobody is ever 'asleep', I suppose no time is a good time to take SQL Server down for upgrades, and I had forgotten that my host was going to be doing that. Last night about 9pm (Arizona), in the middle of working on a blog post, things started going wonky and I finally realized everything was ok except for SQL Server. I turned in a ticket on it and was reminded about the maintenance schedule... guess I file those away in memory and just assume they'll happen while I'm asleep :) So, looking at the schedule, it appears that SQL Server for SilverlightCream is going to be down tonight. Minimum is 9-12pm Arizona time... mileage and time may vary. Since all the posts are run through SC to get the Skim count, having SQL down sucks, but I'd rather we got maintenance than have to react to a crash because of something that wasn't maintained. I'll try to get the next 'Cream post out early so that the bulk of folks can dig through it prior to the outage. Meanwhile, for those of you in Phoenix, tonight is our Phoenix Silverlight User Group April meeting, and Joel Neubeck is going to be giving us the run-through on Windows Phone 7! We're not as advanced as those MVP rock-stars in California like Victor Gaudioso who streams his user group meeting, so you'll just have to show up for the goodness! And for anyone that's interested, here's some WP7 bling for your desktop... I want some of this real bad for my laptop! Get the full image in the post by Ozymandias:

  Read the article

• Boot failure after update and system crash 11.10

  - by Alubuntu

  I'm using: Dell XPS M1330 laptop, Ubuntu 11.10 32bits, single boot (only Linux OS), Virtualbox (with Windows XP on virtual machine). System crashed while working with a very heavy image on GIMP (and Virtualbox was on). During the same session, I made an automatic system update, but don't know what was exactly updated. After the crash the system doesn't boot. Always freezes on terminal screen but at different stages, ""Starting CUPS printing spooler/server", "Checking battery state", "mountall: plymouth command failed", etc. Sometimes indicates [failed] in some of the processes and sometimes they're all [ok]. Did a Boot info summary with boot-repair and gave me this report http://paste.ubuntu.com/1050743/ This is not a new install, have been using it for almost 6 months...though since last month it couldn't halt..it started shutting down and stopped at black screen with fan on and on/off light still on (I used to finish the shutdown process by forcing halt with a long-press of the power button). I don't know if these has anything to do with the boot failure. Is there anyway I can solve this issue (the boot failure) or make some sort of system check to find out what is the cause of the problem? I wasn't sure if this was the right place to ask the question, so I also did it at https://answers.launchpad.net/ubuntu/+question/201004

  Read the article

• Grub doesn't show both Ubuntu installations

  - by jackweirdy

  I have a laptop with Ubuntu 12.04 LTS installed as the main OS. The other day I installed Ubuntu-Studio (version 12.04) into another partition on the machine. The installation went great and when the machine booted, the grub menu popped up and I could see the option for Ubuntu Studio and the vanilla Ubuntu OS'. The problem was that this version of grub, installed by the Studio installer, didn't look great and insisted on putting Studio at the top of the list, and therefore as the main OS to boot. I use the standard Ubuntu more often, so I booted into that and ran sudo grub-install dev/sda. That worked OK and now Ubuntu boots as normal. Only problem is that the Grub menu doesn't show up and doesn't give me a chance to choose the other OS. Running sudo os-prober shows that it can find ubuntu studio, it doesn't give me a chance to boot it. Any ideas as to how I can fix this problem? Cheers in advance. EDIT: followed instructions here and saw the boot menu, but the only boot options present were for the standard installation of Ubuntu.

  Read the article

• How to zero out a drive?

  - by Mohd Arafat Hossain

  I'm currently running Ubuntu 12.04 and want to completely format my laptop so I can install Windows 7 (replace Ubuntu). When I put in my bootable USB with the OS it just shows a black screen with a white blinking cursor on the top left corner. I wait for hours (to be specific 5 whole hours) waiting for something to happen but I get nothing, so I pull out the USB and my Ubuntu 12.04 loads up. Repeated this several times with putting different boot priority options on top-est that relate to USB but the results are same. I go and visit some sites on the net like this http://www.techspot.com/community/topics/cant-replace-ubuntu-with-windows.175716/ that say I have to zero out my hard drive. My question is how? Note: Erasing out all my data is no problem cause I have nothing important to backup. If I have to lose my primary OS (Ubuntu 12.04) in the process I am ready to as my aim is just to install Windows 7 successfully. Please don't answer that there is something wrong with my USB or my USB reader/port/hardware or the content inside the USB cause they all works fine on my brothers PC as it boots up flawlessly.

  Read the article

• What You Said: How Do You Sync Your Files Between Your Devices?

  - by Jason Fitzpatrick

  Earlier this week we asked you to share your tricks and techniques for keeping files synced between your different devices. Now we’re back to highlight how you do it. Overwhelmingly, you do it with Dropbox. Despite the proliferation of different platforms there has been little inroads made into any sort of universal syncing. We heard from quite a few different readers and by far the most popular option was to use Dropbox to ensure that you could get the music and documents you wanted whether you were on your desktop, laptop, netbook, iPhone, or Android device. In the same breath however, nearly all of your added on an additional service. The real message, it would seem, is that there simply isn’t a service good enough to meet all of the needs most users have, all of the time. The most common response to our Ask the Readers question was “Dropbox and…”; this pattern is illustrated nicely in the following quotes. Kim writes: Dropbox for all kinds of things. (Would also use Sugarsync, but it doesn’t support Linux.) Lastpass for passwords. Xmarks for bookmarks, although I’m going to try Firefox Sync soon. Evernote for things like shell commands I might want someday. Google Beta for music, once I get it uploaded. I have an Amazon account too, but Google gives you more space. Gmail. Michael finds himself in a similar situation and writes: How to Make and Install an Electric Outlet in a Cabinet or DeskHow To Recover After Your Email Password Is CompromisedHow to Clean Your Filthy Keyboard in the Dishwasher (Without Ruining it)

  Read the article

• Trying to install Canon iP7250 printer

  - by Chris Burmajster

  I'm trying to install my Canon iP7250 printer on a fresh install of 13:10 64bit. Last time I installed it successfully via http://handytutorial.com/install-canon-printer-driver-for-ubuntu-13-04-12-10-12-04 which entailed adding a repository via the terminal and then updating it. I then opened Synaptic and searched for my printer model and Synaptic then installed everything. This time round I added the repositories but the update failed with the following error: Failed to fetch http://ppa.launchpad.net/michael-gru...amd64/Packages 404 Not Found Failed to fetch http://ppa.launchpad.net/michael-gru...-i386/Packages 404 Not Found Some index files failed to download. They have been ignored, or old ones used instead. An internet search failed to find another way of installing this printer so I'm stuck. My laptop also runs 64 bit 13:10 and the printer works, as I installed it months ago. Is there any way I can take something off that to use on this new machine? Thank you all in advance P.S. I have just found and downloaded the official Canon driver from the Canon website and extracted it, but I don't know how to install it.

  Read the article

• How to Share Links Between Any Browser and Any Smartphone

  - by Justin Garrison

  It happens all the time, you find an article to read but then nature calls. Do you take your laptop with you? With site to phone you can share links between any browser and any smartphone with a single click. If you have Android you may be familiar with this functionality with Google’s Chrome to phone, or with webOS’ Neato! But what if you have an iPhone, Blackberry or Windows Phone 7 device? That is where site to phone comes in handy. It not only supports every major mobile smartphone operating system, but it also supports every major web browser Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor These 8-Bit Mario Wood Magnets Put Video Games on Your Fridge Christmas Themes 4 Pack for Chrome and Iron Browser Enjoy the First Total Lunar Eclipse in 372 Years This Evening Gmail’s Free Calling Extended Through 2011 Voice Search Brings Android-Style Voice Search to Google Chrome X-Mas Origins: Santa – Fun X-Men and Santa Mashup [Video]

  Read the article

• Canon Pixma 432 network scanner

  - by Donald Cutler

  I have a problem with a Canon Pixma MX432 Printer/Scanner. I just removed Windows 7 and installed Ubuntu 14.04 8/17/2014 on an older desktop that I built (The computer is an AMD build with an ASUS motherboard). The printer/scanner is an all-in-one unit that is networked in my house via WiFi. All of the computers in my house can access this printer/scanner. My Macbook, my wife's Windows 8 laptop, and my kids mini iPads. I am giving Linux a test-drive with some success as far as setting devices up. But, for the life of me I cannot figure out my scanner issue. If anyone can help I would appreciate it. Make/Model: Canon Pixma MX432 PPD Driver: I have no idea how to get this info. Supported?: no, from the information I gather from old forum posts. Works?: the printer works via WiFi perfectly, but not the scanner. The Simple Scan program sees the scanner, but produces an error when I attempt to scan. I also tried XSANE, but that program does not even detect the scanner. NOTE: THE PRINTER IS WORKING OFF OF AN UBUNTU DRIVER AND NOT A CANON DRIVER. Linux Version: Ubuntu 14.04 I tried the steps in this post, downloaded the "scangearmp-mx430series-1.90-1-deb.tar.gz" file, but could not get the scanner to work. http://ubuntuforums.org/archive/index.php/t-2096430.html any suggestions?

  Read the article

• ArchBeat Link-o-Rama for November 15, 2012

  - by Bob Rhubart

  WLST Starting and Stopping a WebLogic Environment | Rene van Wijk Oracle ACE Rene van Wijk explores how to start a server with as little input as possible. Developing and Enforcing a BYOD Policy | Darin Pendergraft Darin Pendergraft's post includes links to a recent Mobile Access Policy Survey by SANS as well as registration information for a Nov 15 webcast featuring security expert Tony DeLaGrange from Secure Ideas, SANS instructor, attorney and technology law expert Ben Wright, and Oracle IDM product manager Lee Howarth. Cloud Integration White Paper Now Available |Bruce Tierney Bruce Tierney shares an overview of Cloud Integration - A Comprehensive Solution, a new white paper he co-authored with David Baum, Rajesh Raheja, Bruce Tierney, and Vijay Pawar. My iPad & This Cloud Thing | Floyd Teter Oracle ACE Director Floyd Teter explains why the Cloud is making it possible for him to use his iPad for tasks previously relegated to his laptop, and why this same scenario is likely to play out for a great many people. 3 steps to a cloud database strategy that works | InfoWorld "Every day, cloud-based databases add more features, decrease in cost, and become better at handling prime-time business," says InfoWorld blogger David Linthicum. "However, enterprise IT is reluctant to move data to public clouds, citing the tried-and-true excuses of security, privacy, and compliance. Although some have valid points, their reasons often boil down to 'I don't wanna.'" Oracle VM Templates for EBS 12.1.3 for Exalogic Now Available | Elke Phelps "The templates contain all the required elements to create an Oracle E-Business Suite R12 demonstration system on an Exalogic server," says Elke Phelps. "You can use these templates to quickly build an EBS 12.1.3 demonstration environment, bypassing the operating system and the software install (via the EBS Rapid Install)." Thought for the Day "A good plan executed today always beats a perfect plan executed tomorrow." — George S. Patton (November 11, 1885 - December 21, 1945) Source: SoftwareQuotes.com

  Read the article

• Compiz not drawing window controls in ubuntu 11.10

  - by Siva Prasad Varma

  I have recently installed driver for my ATI graphic card in my Dell Studio laptop. I have also read this somewhere on the web that Ubuntu enables compiz window manager by default if your hardware can run it. Is it true ? In my case before Installing graphic card driver the window manager was Metacity, but now I have compiz as my Window manager. I found this out uisng Displex Indicator applet also confirmed by wmctrl -m. From the time I have installed graphic card drivers, the window manager(Compiz) is not drawing window control buttons for some of the windows. For example if I open a terminal I have to close it using key board shortcuts or use the File - Quit option in app-menu. Also I am not able to move the window because of this. From then when-ever I find a window without window control buttons I am restarting the window manager using Displex Indicator applet. But this is very annoying and also consumes a lot of time(when I am doing my work). Can any one suggest any solution for this. What are up's and down's of using Compiz Vs Metacity.

  Read the article

• Error mounting: mount exited with exit code 13

  - by Mike Williamson

  I keep a windows partition on my laptop for the occaisional bit of Photoshop work. A while ago I noticed that Windows had disappeared from my grub boot menu and when I try to mount the windows partion, my system hangs for a bit and then I get this: Unable to mount 105 GB Filesystem Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to calculate free MFT records: Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. It seems that chkdsk is a windows command but since I can't boot into windows (since its the windows partition that is the problem) I'm not sure what to do. Here is the output of fdisk to give you the lay of the land: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x98000000 Device Boot Start End Blocks Id System /dev/sda1 1 10199 81923436 83 Linux /dev/sda2 * 10200 22947 102398310 7 HPFS/NTFS /dev/sda3 22948 29164 49938052+ 83 Linux /dev/sda4 29165 30401 9936202+ 5 Extended /dev/sda5 29165 30401 9936171 82 Linux swap / Solaris Any guidance would be appreciated!

  Read the article

• Backtick (Grave accent) button sticking

  - by Scott Lemmon

  I have Ubuntu 12.04 running in a Virtual Box virtual machine, on my Windows 7 32bit system. It has been working great, except that the backtick/tilde button sticks(not physically). When I hit the backtick button it keeps repeating until another input button is pressed. So if I press the spacebar while the backtick is repeating, it stops, but if I press the shift while it is repeating, the backtick turns into a tilde, and the tilde keeps repeating until I release the shift key (at which point it's a backtick again and keeps repeating). This sticking behavior only happens with the backtick key, and only in my Ubuntu virtualization, never in windows. I've tried both my laptop's keyboard and an external USB keyboard and the problem happens on both. Both keyboards I've tried are Japanese 106/109 key layout, but I'm using them with a English(US) 101 profile. When I refer to the backtick key above, I mean where it is on the US layout. If I use the Japanese profile, the key in that location (the US backtick location) still sticks, but its no longer mapped as the backtick key. Any thoughts as to what might be causing this and possible solutions? I've searched a lot, but have not found any help so far. Any help is greatly appreciated.

  Read the article

• ODI 12c - Getting up and running fast

  - by David Allan

  Here's a quick A-B-C to show you how to quickly get up and running with ODI 12c, from getting the software to creating a repository via wizard or the command line, then installing an agent for running load plans and the like. A. Get the software from OTN and install studio. Check out this viewlet here for quickly doing this. B. Create a repository using the RCU, check out this viewlet here which uses the FMW Repository Creation Utility.  You can also silently create (and drop) a repository using the command line, this is really easy. .\rcu -silent -createRepository -connectString yourhost:1521:orcl.st-users.us.oracle.com -dbUser sys -dbRole sysdba -useSamePasswordForAllSchemaUsers true -schemaPrefix X -component ODI -component IAU  -component IAU_APPEND  -component IAU_VIEWER -component OPSS < passwords.txt where the passwords file contains info such as; sysdba_passwd newschema_passwd odi_user_passwd D workreposname workrepos_passwd  You can find details about the silent use of RCU here in the FMW documentation. C. Quickly create an agent for executing load plans and the like -  there is a great OBE for this, check it out here. If you are on your laptop and just wanting as minimal an agent as possible then this link is a must. With these three steps you are ready to get to the fun stuff! Check out more OBEs here - keep on the lookout for more!

  Read the article

• Free Developer Day - Hands-on Oracle 11g Applications Development

  - by [email protected]

  Spend a day with us learning the key tools, frameworks, techniques, and best practices for building database-backed applications. Gain hands-on experience developing database-backed applications with innovative and performance-enhancing methods. Meet, learn from, and network with Oracle database application development experts and your peers. Get a chance to win a Flip video camera and Oracle prizes, and enjoy post-event benefits such as advanced lab content downloads.Bring your own laptop (Windows, Linux, or Mac with minimum 2Gb RAM) and take away scripts, labs, and applications*.Space is limited. "Register Now"  for this FREE event. Don't miss your exclusive opportunity to meet with Oracle application development & database experts, win Oracle Trainings, and discuss today's most vital application development topics.          Win two Oracle Trainings valued in $2500 each. Offered by SDT Learning Corp·         Oracle Application Express: Developing Web Applications (duración de 4 días)·         Oracle Fusion Middleware 11g: Java Programming Ed 1.1 (duración de 5 días)You can also be registered Calling to Jamielle Gandía at 787-999-3187Requirements by TrackFor .Net Track1) A windows machine with 2 GB memory2) Attendees must in advance of the show, download and install VMWare player:       http://www.vmware.com/products/player/3) Attendees should test their machine to make sure they can run an executable on an external USB hard drive (some corporate machines are locked down so they cannot do this)For Java TrackYou will save time if you install these applications in advance:1) A windows machine with 2 GB memory2) VirtualBox must be installed in each laptopWhat is virtual box? Where can I download it?For APEX Track1) A windows machine with 2 GB memoryOracle Corporate agenda @  HereNote:  (Limited to 50 people per Track)

  Read the article

• Middleware Day at UK Oracle User Group Conference 2012

  - by JuergenKress

  Registration has opened for UK Oracle User Group Conference 2012, the UK’s largest Independent Oracle Technology & E-Business Suite conference from 3rd - 5th December, 2012. The conference will attract over 1,700 attendees from the UK and internationally. Spanning three days and featuring over 250 presentations which range from end-users telling their war stories to Oracle unveiling the latest product roadmaps. We have always been trusted to provide exceptional events with innovative content and renowned speakers and our 2012 event is no exception. It is just not our words, 95% of attendees from the last years conference, highly recommend the experience to other Oracle user. You can get an overview of the conference, listen what last year's delegates thought and explore the full agenda on the conference website: www.ukoug.org/ukoug2012. Join the UK Oracle User Group for ‘Middleware Sunday’ - an event packed with technical content for WebLogic administrators taking place on 2nd December the day before the start of UKOUG Conference 2012. The day has been organised by middleware enthusiasts Simon Haslam and Jacco Landlust and is free to UKOUG 2012 delegates. The content level will be pitched intermediate to advanced. So delegates are expected to be comfortable with WebLogic and its configuration terms, such as domains and managed servers. We will also have a fun, hands-on session for which you’ll need a quick laptop to join our mega-cluster! For more information visit the UKOUG 2012 website: www.ukoug.org/2012. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: UK user group,middleware day,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• conky stopped displaying after daul monitors setup -- works when I detect monitors

  - by synaptik

  I just recently installed Ubuntu 12.04 on a clean install. I previously was using 11.10. I am also using a new laptop with a Dell docking-station and two external monitors. When I try to use the .conkyrc file that I used previously, my conky display simply doesn't show up anywhere. However, after I went to System Settings Displays and made some slight change that caused the monitors to refresh, then conky appeared as it should. Here is my .conkyrc file: background yes use_xft yes xftfont DejaVu Sans Mono:size=8 xftalpha 0.8 out_to_console no update_interval 2.0 total_run_times 0 draw_shades no short_units yes # Create own window instead of using desktop (required in nautilus) own_window yes # If own_window is yes, you may use type normal, desktop or override own_window_type override # Use pseudo transparency with own_window? own_window_transparent yes double_buffer yes default_color f0e68c color1 white color2 AD0303 alignment bottom_left gap_x 2 gap_y 30 no_buffers yes use_spacer right pad_percents 3 xftfont Terminus:size=10 TEXT $stippled_hr cpu1: ${color1}${cpu cpu1}% ${color} cpu2: ${color1}${cpu cpu2}% ${color} load: ${color1}$loadavg ${color} hot proc: ${color1}${top cpu 1}% - ${top name 1}${color} $stippled_hr big proc: ${color1}${top_mem mem_res 1} - ${top_mem name 1}${color} memory: ${color1}$mem/$memmax $memperc%${color} $stippled_hr disk: ${color1}${fs_used /}/${fs_size /}${color} swap: ${color1}${swap}/${swapmax}${color} ${diskiograph_read 15,120 color1 0077ff 750} ${diskiograph_write 15,120 color1 0077ff 750} $stippled_hr download: ${color1}${downspeed wlan0} /s${color} ${downspeedgraph eth0 20,120 104E8B 0077ff} upload: ${color1}${upspeed wlan0} /s${color} ${upspeedgraph eth0 20,120 104E8B 0077ff} How can I fix it so that I don't have to tamper with the Displays settings in order for conky to show up?

  Read the article

• 5 Ways Microsoft Can Improve the Windows 8 Start Screen

  - by Matt Klein

  After having used Windows 8 over the past few months, we’ve found a few ways Microsoft could immediately improve the Start Screen to make it less disorienting and more usable, not only for tablets but desktops and laptops as well. It’s safe to say that the one thing Windows 8 doesn’t lack is criticism. Since the Consumer Preview debuted in February, it has proven to be one of the most polarizing Windows releases ever. But regardless of whether you love or hate it, Windows 8 is where Microsoft’s venerable operating system is headed. Portable computing is here to stay and if the company is to survive, let alone remain relevant, it has to change, adapt, embrace, and extend. Perhaps the single most universally controversial change to Windows is Microsoft’s decision to remove the Start button (or orb, if you’ve moved beyond XP) and with it, what we know to be the Start Menu. In their place we now have a Start hot corner (a workable alternative) and the newly redesigned Metro Start Screen. The Start Screen is, if nothing else, different. Beyond a doubt, there has not been such a radical redesign of Windows’ Start functionality since it went to a two-column design with a nested “All Programs” menu in Windows XP. The Start Screen can be a little jarring because it requires users to not only relearn what they’ve known for nearly two decades but to also rethink the way they interact with Windows. However, the Start Screen maintains its core elements: a Start “menu”, a place for all installed programs (All apps), and a search pane. The Start Screen is attractive, clean, bold, and very imperfect. Here are five changes we’d like to see in the Start Screen before Windows 8 goes gold … How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

  Read the article

• Wireless not detected on an hp Pavilion g6 - RT5390PCIe

  - by Earl Larson

  I just bought an HP Pavilion g6 laptop and I installed Natty Narwhal alongside Windows 7. In Windows 7, my WiFi works perfect but in Ubuntu it absolutely (no matter what I do) won't detect my home WiFi network. Here is the output of "lspci": earl@ubuntu:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 03:00.0 Network controller: Ralink corp. Device 5390 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01) earl@ubuntu:~$

  Read the article

• Upgrading Visual Studio 2010

  - by Martin Hinshelwood

  I have been running Visual Studio 2010 as my main development studio on my development computer since the RC was released. I need to upgrade that to the RTM, but first I need to remove it. Microsoft have done a lot of work to make this easy, and it works. Its as easy as uninstalling from the control panel. I have had may previous versions of Visual Studio 2010 on this same computer with no need to rebuild to remove all the bits. Figure: Run the uninstall from the control panel to remove Visual Studio 2010 RC Figure: The uninstall removes everything for you.  Figure: A green tick means the everything went OK. If you get a red cross, try installing the RTM anyway and it should warn you with what was not uninstalled properly and you can remove it manually.   Once you have VS2010 RC uninstalled installing should be a breeze. The install for 2010 is much faster than 2008. Which could take all day, and then some on slower computers. This takes around 20 minutes even on my small laptop. I always do a full install as although I have to do c# I sometimes get to use a proper programming language VB.NET. Seriously, there is nothing worse than trying to open a project and the other developer has used something you don't have. Its not their fault. Its yours! Save yourself the angst and install Fully, its only 5.9GB. Figure: I always select all of the options.   Now go forth and develop! Preferably in VB.NET…   Technorati Tags: Visual Studio,VS2010,VS 2010

  Read the article

• Gestão do Conhecimento 2.0 - Data Adiada para 30 de Junho

  - by Claudia Costa

  Nas organizações o conceito de intranet está a evoluir de um simples repositório de documentos e links para uma plataforma colaborativa, onde os colaboradores podem consultar, navegar, publicar, analisar, comentar e valorizar os seus conhecimentos e de outros.   Durante esta sessão apresentaremos os produtos e proposta de valor da Oracle para a evolução da intranet e gestão do conhecimento 2.0 (também conhecido como Social KM). Clique aqui e registe-se.   Agenda (Oracle, Lagoas Park/ 9:30-14:30) 09:15 - Café de Boas Vindas & Registo 09:30 - Gestão do Conhecimento 2.0 10:30 - Demo de GdC 2.0 com Oracle 11:00 - Coffee Break 11:30 - Oracle WebCenter Framework 12:30 - Oracle WebCenter Spaces 13:30 - Conclusão   Pré-requisitos Cada participante deverá trazer o seu Laptop preparado com as seguintes características: ·         2GB RAM, com acesso a WiFi ·         Disco rígido com 25GB de espaço livre (caso queira gravar a máquina virtal a disponibilizar durante a sessão)    Clique aqui e registe-se.   * Pedimos desculpa por esta alteração.  Caso surja algum impedimento em poder participar nesta nova data, agradeço por favor que nos informe.    

  Read the article

• How to get a Sun Ray to load a firmware from elsewhere

  - by vdiozguy

  I run a Sun Ray/VDI demo environment internally within the company - and because it's not a public service, I need to tell my Sun Rays to connect to it directly so that I don't get redirected to the corporate servers. To get any new Sun Ray to connect to *my* setup I usually pull out my laptop so that the Sun Ray can load the new version of the F/W along with the permission to pull up the management GUI via STOP-S.But there is a better way if you have another Sun Ray server handy:1) allow your Sun Ray to connect to the default corporate server2) log in to a "regular" session, that is a Solaris or Linux desktop on the Sun Ray server itself3) in a terminal, utswitch to your server (/opt/SUNWut/bin/utswitch -h myserver)4) again, login to a regular session there5) in a terminal,  issue "/opt/SUNWut/lib/utload -S myserver -w"6) Watch your firmware load and wait7) the Sun Ray will reboot and connect to the first server again. Repeat steps 2-48) issue "/opt/SUNWut/lib/utload -S myserver -f SunRay.enableGUI"9) Press STOP-S and be merryNOTE: I'm sure there is even yet a better way - this is totally unsupported, most likely a figment of my imagination. In any case, this post will self-destruct in BOOM.

  Read the article

• Why can't I run Compiz?

  - by jasoncruz98

  I installed Ubuntu 11.10 on my laptop. The main reason I switched to Ubuntu is because I wanted to use Compiz. The first thing I did was to go to Additional Drivers and install ATI/AMD Proprietary FGRLX Graphics Driver. There was also another one available, ATI/AMD Proprietary FGRLX Graphics Driver (post-release updates), but I didn't install that one, because it basically meant the same thing to me as the one I already installed. Next, I went to the ubuntuguide.org Oneiric Wiki http://ubuntuguide.org/wiki/Ubuntu:Oneiric#Compiz_Fusion So I followed the instructions there and ran this command in terminal: sudo apt-get install compiz compizconfig-settings-manager compiz-fusion-plugins-main compiz-fusion-plugins-extra emerald librsvg2-common But then, the terminal window said that the package "emerald" could not be found. So, I ran this command instead: sudo apt-get install compiz compizconfig-settings-manager compiz-fusion-plugins-main compiz-fusion-plugins-extra After that, I installed Fusion Icon by running this command: sudo apt-get install fusion-icon I restarted my computer, searched for Compiz Config Settings Manager, and clicked on it. Then, I activated Wobbly Windows. I logged off and logged back on again, but there was no wobbly windows effect. So I tried clicking on Fusion Icon, but it never started. Can someone please tell me what I did wrong here? Because I see everyone seems to be able to run Compiz except me. I really need to start Compiz, or else I think I'm going to uninstall Ubuntu.

  Read the article

< Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >