Search Results

Search found 8343 results on 334 pages for 'laptop disasters'.

Page 274/334 | < Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >

• Upgrade won't allow second display to go to 1920x1080

  - by Rick

  I just upgraded to 10.10 last night and I'm having issues now with dual display from my laptop dock. This was working in the previous release with a manual xrandr command: xrandr --output LVDS1 --off --output DP1 --mode 1920x1080 && xrandr --output VGA1 --mode 1920x1080 --left-of DP1 When I run this now, the DP1 output doesn't have a mode for 1920x1080. The two displays are a matched pair of dell 22" that are both 1920x1080. When I attempt to manually add the mode xrandr --addmode DP1 1920x1080 and rerun my command, I lose both displays altogether. I have to then blindly reset to just one of them in order to get display back. If I avoid the 1920 and just attempt to setup DP1 at the 1280x1024 max it thinks it has, then the second display will come up, but obviously looks horrible since it's non-native resolution. I've grabbed the updated xorg intel driver from the stable X ppa and am running: 2:2.13.901-2ubuntu2~xup~maverick xrandr output Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 LVDS1 connected (normal left inverted right x axis y axis) 1280x800 60.2 + 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI1 disconnected (normal left inverted right x axis y axis) DP1 connected (normal left inverted right x axis y axis) 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1

  Read the article

• How to Uninstall Internet Explorer 10 in Windows 8

  - by Taylor Gibb

  We previously explained why so many geeks hate Internet Explorer, and even though Internet Explorer 9 and 10 are greatly improved, and on par with the competition, we’re still going to explain how to uninstall it from Windows 8 if you should want to do so. Uninstalling Internet Explorer 10 Press the Win + R keyboard combination and type appwiz.cpl into the run box, then hit enter. When the Programs and Features window opens, you are going to want to click on the “Turn Windows features on or off” hyperlink on the left hand side. Next, find Internet Explore and uncheck it. You will then be given a warning, you can just click yes to continue. Now click on the OK button, and then reboot your machine. Once you machine has restarted, you will see that Internet Explorer is no longer in the taskbar You should also notice that the Metro version of Internet Explorer has also been removed. That’s all there is to it. How to Banish Duplicate Photos with VisiPic How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It?

  Read the article

• removed ati proprietary driver, tried to hibernate, destroyed ubuntu installation. help?

  - by Niklas

  I totally ruined my Ubuntu 10.10 Desktop x64 installation today. I've never been able to hibernate or suspend (not with my laptop, server or htpc), not even through this guide. So I read a post here on askubuntu.com that said that the proprietary drivers may be in the way for it to work. Therefore I removed my ATI-drivers, rebooted, then tried to hibernate the system. I got some error about "blk_something_something didn't work, resubmitting1". So I turned off the computer and then tried booting up. I see the ubuntu splash but after that I'm greeted with this screen: The upper dot is the mouse pointer since I can move it with the mouse (I have ubuntu set to login automatically). I don't know how this happened. What can I do to fix this? I'm getting seriously irritated over how buggy ubuntu is, why doesn't even suspend/hibernate work (remember that I have 3 different systems where it fails)? So what is the next step? I want to get into cli mode and reinstall the driver but since I'm relatively new to ubuntu I don't know how to get into a terminal without logging in first. And if I press shift during boot I can't get into grub either and try something from there. Please come with all suggestions you can think of! Thank you very much! edit: Can I use ubuntu on a usb to insert the driver I need - if that is the problem?

  Read the article

• Restart problem after installing graphical card driver

  - by Tim

  My laptop is Lenovo T400, running Ubuntu 10.10. My problem: I just run jockey-gtk and installed ATI/AMD proprietary FGLRX graphics driver. But after reboot, there is a short period of graphical "Ubuntu" and then instead of starting X-window it completely changed to command line to ask me to login. Even after login and then issuing xinit, it still failed to start X. To solve this problem: I followed this post, where one person suggested to you can simply write sudo apt-get remove fglrx This worked for me. If it doesn't work, then try sudo apt-get remove xorg-driver-fglrx and restart. I actually don't need the driver anyway, so I issued the first command after login under command line. But after reboot, the situation is even worse, and there is now even no command-line interface to ask me login, instead the screen is completely blank with just some ambient light in the background and Ubuntu is hanging there probably forever. So I have no chance to try the second command the person suggested. I was wondering what I can do now to solve my problem? Thanks and regards!

  Read the article

• Why am I not getting an sRGB default framebuffer?

  - by Aaron Rotenberg

  I'm trying to make my OpenGL Haskell program gamma correct by making appropriate use of sRGB framebuffers and textures, but I'm running into issues making the default framebuffer sRGB. Consider the following Haskell program, compiled for 32-bit Windows using GHC and linked against 32-bit freeglut: import Foreign.Marshal.Alloc(alloca) import Foreign.Ptr(Ptr) import Foreign.Storable(Storable, peek) import Graphics.Rendering.OpenGL.Raw import qualified Graphics.UI.GLUT as GLUT import Graphics.UI.GLUT(($=)) main :: IO () main = do (_progName, _args) <- GLUT.getArgsAndInitialize GLUT.initialDisplayMode $= [GLUT.SRGBMode] _window <- GLUT.createWindow "sRGB Test" -- To prove that I actually have freeglut working correctly. -- This will fail at runtime under classic GLUT. GLUT.closeCallback $= Just (return ()) glEnable gl_FRAMEBUFFER_SRGB colorEncoding <- allocaOut $ glGetFramebufferAttachmentParameteriv gl_FRAMEBUFFER gl_FRONT_LEFT gl_FRAMEBUFFER_ATTACHMENT_COLOR_ENCODING print colorEncoding allocaOut :: Storable a => (Ptr a -> IO b) -> IO a allocaOut f = alloca $ \ptr -> do f ptr peek ptr On my desktop (Windows 8 64-bit with a GeForce GTX 760 graphics card) this program outputs 9729, a.k.a. gl_LINEAR, indicating that the default framebuffer is using linear color space, even though I explicitly requested an sRGB window. This is reflected in the rendering results of the actual program I'm trying to write - everything looks washed out because my linear color values aren't being converted to sRGB before being written to the framebuffer. On the other hand, on my laptop (Windows 7 64-bit with an Intel graphics chip), the program prints 0 (huh?) and I get an sRGB default framebuffer by default whether I request one or not! And on both machines, if I manually create a non-default framebuffer bound to an sRGB texture, the program correctly prints 35904, a.k.a. gl_SRGB. Why am I getting different results on different hardware? Am I doing something wrong? How can I get an sRGB framebuffer consistently on all hardware and target OSes?

  Read the article

• Dlink DWA-643 ExpressCard / Atheros AR5008 can't connect to wifi networks

  - by Justin Kelly

  I've just purchased a D-Link DWA-643 Xtreme N ExpressCard Notebook Adapter - but it can't connect to my wireless network The card is listed on the FSF website and - refer links below: http://www.fsf.org/resources/hw/index_html/net/wireless/index_html/cards.html http://www.dlink.com.au/products/?pid=550 Ubuntu see the card as using the Atheros AR5008 chipset - refer image below The card lights up and I can see that available wifi networks using this card - so it seems to 'just work' on ubuntu 12.04 but when i try and connect to my networks - it fails I've tried setting the network to all the different options (WEP, WPA2, no encryption, etc.. b/g/n ) but ubuntu sill cant connect to it I've also installed wicd but still couldn't connect Has anyone got a DWA-643 to work in Ubuntu? Or does anyone have any suggestion on how to get it to connect?? Any help would be greatly appreciated Note: the laptop has built in wifi but its broadcom, works but with dialup speed connection - and i've had nothign but trouble using the boardcom drivers so purchased the FSF recommended PCI expresscard as i hoped it would 'just work' on the latest Ubuntu i've have tried to disable the built in wifi - broadcom - but even with the broadcom uninstall and unavailable it didnt help the dlink to connect previously I had MAC address filtering on the router - i've added the dlinks MAC - and also disabled MAC address filtering - still no luck lspci output below: 18:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: D-Link System Inc Device 3a6f Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at e4000000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

• No GUI boot; startx error, I suspect no filesystem corruption.

  - by Dharmaj Soni

  Till yesterday, my Ubuntu 9.10 was working fine. I had watched a movie using vlc. I had also charged my ipod using the laptop. Today, when I started it, I automatically booted into command line. There seems to be no filesystem corruption etc as I can view/open (text) files. Before the CLI appeared, the screen blinked with a cursor, then the white Ubuntu logo flashed, and then I got the CLI login prompt. After logging in, if I try startx, to start gnome, I get the following error after a few seconds: giving up xinit: No such file or directory (errno 2): unable to connect to X server xinit: No such process (errno 3): Server error* The same error comes up, even if I use sudo, or if I change my directory to '/' before using startx, and also when, from the grub, using the recovery mode option to load into CLI, and then trying startx. On trying command 'xinit', I get "Server error" Also, on trying GDM, I get 2 errors. I cannot connect to the internet in this state. Thanks for any help. I am using Dell Inspiron 1440, no special graphics card.

  Read the article

• how to install 13.04 on a partitioned hardrive

  - by Denny

  First, not a computer literate person, not even a novice- so please use small words. I recently made the switch to ubuntu, it came preloaded on my new laptop that I order from a big tech dot com site. The version on it is 12.04 (i think) and 64bit. This system has a lot that I like but it is quirky for me to say the least. Apparently I have held broken packages and have no way of knowing how to find them. I discovered this when trying to download (from software center) VLC so that I could watch some movies I had on an external hard-drive. Unmet dependencies error and held broken package errors abound while trying to fix the problem. Ive scoured this site and other and followed almost all the suggestions to a T but still I am unable to fix anything. My computer is partitioned (but I don't even know how to get to the otherside so to speak). I would like to know; can I put the newer 13.04 OS on one side of the partition and then delete the older version on the other side? or, can I install 13.04 over the existing 12.04? What would I need to do this? An obstacle that I have is this, I am currently serving in Afghanistan so going someplace to buy something or running down to a computer store for service support is out of the question. I very much appreciate your help, cause right now this computer is nothing more than a word processor, which would be fine if all i wanted was a word processor. Thanks in advance.

  Read the article

• How to restore curropted installation?

  - by nightweels

  I have a laptop with dead battery that when there is no current connected to it turns critical so fast and in the energy management in ubuntu, when the battery is critical, there are 2 options: shutdown and hibernate witch is in grey (unclickable), so I have no choice but to chose immediate shutdown, there is no standby even if it is an option in the screen behavior. An immediate shutdown (and I mean by immediate the one that we use when we ended using the computer) happened while I was installing a program called quickly, so after the power was restored, I tried to reinstall the program then I get this translated message: An untreatable error occurred: It seems there is a software error in aptdaemon, the program that lets you install and remove software and any other task related to package management. details: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 968, in simulate trans.unauthenticated = self._simulate_helper(trans) File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 1092, in _simulate_helper return depends, self._cache.required_download, \ File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 235, in required_download pm.get_archives(fetcher, self._list, self._records) SystemError: E:I wasn't able to locate a file for the libpng12-dev package. This might mean you need to manually fix this package.

  Read the article

• Dual boot Win 7 Ubuntu - home and boot partitions have no mount point

  - by cwmff

  After installing Ubuntu 12.04.3 on a Windows 7 laptop, running Ubuntu Disk Utility showed the following partition information; /dev/sda1 NTFS, Bootable, Filesystem, Labled: System Reserved, 105MB, Not Mounted /dev/sda2 NTFS, no flag, Filesystem, no label, 84GB, Not Mounted /dev/sda3 Usage: Container for logical partitions. Partition Type: Extended (0x05). no flags. no label. Capacity: 416GB /dev/sda5 Usage: Filesystem. Partition Type: Linux (0x83). no partition label. no flags. Capacity: 999MB. Type: Ext4(ver 1.0). Available: -. Label: -. Mount Point: Not Mounted /dev/sda8 Usage: Filesystem. Partition Type: Linux (0x83). no partition label. no flags. Capacity: 30GB. Type: Ext4(ver 1.0). Available: -. Label: -. Mount Point: Mounted at / /dev/sda6 Usage: Filesystem. Partition Type: Linux (0x83). no partition label. no flags. Capacity: 377GB. Type: Ext4(ver 1.0). Available: -. Label: -. Mount Point: Not Mounted /dev/sda7 Usage: Swap Space. Partition Type: Linux (0x82). no partition label. no flags. Capacity: 8.4GB. sda2 contains Windows 7 but without a mount point sda6 should have been the Home partition and sda5 should have been the Boot partition but the mount points seem to have been lost and now everything but Swap has gone into the root partition sda8 (the Home folder also seems to be within sda8). How do I go about getting sda6 used as the Home partition and sda5 as Boot

  Read the article

• cannot access ubuntu 12.04 SAMBA share from windows 7 using hostname

  - by user98398

  I've been trying for days to get this working, and everywhere I look online it seems no one has a definitive answer, so here is the run down: I have an external drive attached to my ubuntu 12.04 machine, "nicholas-desktop." I have the entire drive shared over the network via SAMBA. If I try to access the drive from windows 7 by using "\nicholas-desktop" it fails saying it cannot locate "nicholas-desktop." However, if I use the current IP address assigned to my machine by my router's DHCP server by typing "\192.168.2.XXX" I have no problems accessing the share. if I try to ping my ubuntu machine's hostname from windows it fails. The same happens if I try to ping my windows machine, "nicholas-laptop" from my ubuntu machine. Again, if I use either machine's assigned IP address it works fine. Can someone please help me get this working? I don't want any workarounds like setting a static IP, or DHCP reservation, I want to be able to resolve hostnames from both sides. I have tried enabling SAMBA'a WINS server so I could resolve the hostnames using netBIOS, however that didn't work either, I may have made a mistake setting it up though. Thanks for your time, NCB

  Read the article

• How do I install BCM4312 wireless drivers?

  - by t3ch

  completely new to Ubuntu. How do I add Wireless driver for my laptop? I am running a Dell XPS M1330. Right now its acts as if I dont have a Wi-Fi card. :~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M GS] (rev a1) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) 09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

  Read the article

• Screen flickering when using midrange brightness values on Dell XPS

  - by Eliran Malka

  After a fresh Ubuntu install on my laptop, I discovered the function keys for screen brightness control (Fn+F4 and Fn+F5) are not working. Digging around here, I managed to get it to work by following the solution suggested on this post and that one, but alas — after applying it, a strange problem occurred: Setting the brightness level to any value other than minimum or maximum, the screen starts flickering back and forth from the selected level to full brightness, apparently due to Dell's power saver attempting to dim the screen to adjust the brightness levels. I looked up for a solution here on the site, and possibly everywhere, with no avail. Also tried: To manually control the brightness by configuring the ACPI level (setting values by echo [some_value] | sudo tee /sys/class/backlight/[vendor]_backlight/[some_key], without success. Installing the Intel graphics driver, thinking it's missing. Realized it's installed out of the box by installing Mesa Utils. How to resolve this? Environment Model: Dell Studio XPS 13 OS: Windows 7 64bit / Ubuntu 12.04 32bit (dual boot) Graphics Driver: Intel HD 3000 (Sandybridge Mobile x86/MMX/SSE2) lshw -C display output: *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:47 memory:f0000000-f03fffff memory:e0000000-efffffff ioport:2000(size=64)

  Read the article

• Grub loading unknown file system grub rescue

  - by Ashish Kumar

  I am new to Linux. I had Windows 7 installed in my laptop. Yesterday I installed Ubuntu 9.0 from a free CD I got. I choose the option "Install side by side with Windows 7 loader (something like that..)". Everything went fine & I installed Ubuntu. When I restarted, I could easily boot from both Windows 7 & Ubuntu. But later when I booted from Windows 7, I did a disk management by right clicking "my Computer" & choosing the option "Manage". Actually I deleted a drive & added that empty volume in another drive. Now when I start my system it shows the following error: Grub loading Unknown file system grub rescue> I have no clue what to do now. Please help me at urgent. Any solution in layman's language is greatly appreciated. P.S. I want all my files on both Windows 7 & Ubuntu.

  Read the article

• Unable to boot Windows after installing Ubuntu 12.04 - error: invalid efi file path

  - by user113350

  I have a Laptop (ASUS X310A, I installed Ubuntu 12.04 to be side by side with Windows 7 but I seem to have gotten a problem with booting Windows 7. I used the Boot Repair twice with no results. Boot-Repair info: http://paste.ubuntu.com/1417623/ The error I get when starting Windows 7 from GRUB is: error: invalid efi file path In Boot Manager or Menu, I have 3 options now: 2x for Ubuntu (maybe cause I did boot-repair twice) 1x Windows boot manager (If I boot this it opens "ASUS Preload Wizard", it gives me the option to re-install windows losing all previous data -) When I was making the partition before installing Ubuntu, I made the new partition by making sda4 smaller and adding ext4 mounted: "\" and adding a swap area. Installed it and it didn't work, nothing worked. So i booted Ubuntu from the USB again and deleted the partitions I made and decided to make sda3 smaller and making the partitions but this time it gave me the option that I could mount sda3 on "\windows" or "\dos" I ignored it and didn't choose neither because the I know that it doesn't need to be mounted and proceeded to create what is now sda7 (ext4) and sda8 (swap area). It still didn't work so I booted from USB and did the first boot-repair, so I was able to boot Ubuntu now but not windows, but when I did it through my USB I was not able to update boot-repair, so i decided to redo the boot-repair from Ubuntu running on the Hardisk (fully updated) and it still didn't work. In GRUB this is what i see (when booting using Ubuntu as first option in Boot Menu): Ubuntu, with Linux 3.2.0-29-generic Ubuntu, with Linux 3.2.0-29-generic (recovery mode) Windows UEFI loader Windows Boot UEFI bootx64.efi.bkp Windows 7 (loader) (on /dev/sda3) Windows Recovery Environment (loader) (on /dev/sda5) I tried all the ones starting with "Windows" they all don't work Please help, Many Thanks

  Read the article

• Not booting from USB or CD (SYSLINUX Message)

  - by Raymond

  I am trying to install linux on my laptop, a Toshiba Satellite C6550-S5200. I did it once but something happened so I removed it then I had to destroy all data on hard drive so now I have nothing on it. Well I got a iso file burned to a CD and to a flash drive. With the flash drive I get. SYSLINUX 4.06 EDD 4.06-pre7 Copyright (C) 1994-2012 H. Peter Anvin et al With the CD it will start booting it but somewhere loading it up, the dots turn all orange and stay that way and my CD drive turns quiet. Oh and some more info the images work because I tried loading them up on another pc and it worked just fine. I manage to get the CD to boot I just had to let me pc boot up first then insert the CD and have it boot the CD then. Once I get done installing ubuntu it works fine but I have to leave the PC on 24/7 for if I turn it off the PC will freeze 5-10 seconds after booting back up no matter how I install it.

  Read the article

• sp_help

  - by David-Betteridge

  One of the nice things about SQL Server Management Studio (SSMS) is that you can highlight a table name in a script and press Alt + F1 to perform sp_help on it. Unfortunately I've never been able to use that feature as the majority of the tables in our product belong to a schema other than dbo.    On a long train journey back to York I wondered if I could solve this problem by writing my own replacement for sp_help (which I’ve called sp_help_table_schemas).  My version works by first checking the system tables to find out which schemas the table belongs to SELECT s.Name   --Find the schema FROM sys.schemas s  JOIN sys.tables t on t.schema_id = s.schema_id  WHERE t.name = 'Orders'It then dynamically calls the standard sp_help method but this time supplying the table owner as well.SET @cmd = 'EXEC sp_help ''' + QUOTENAME(@SchemaName) + '.' + QUOTENAME(@ObjectName) + ''' ;' ;           EXEC ( @cmd )Once I had proved the basics worked I wrapped it up into a stored procedure and deployed it to the master database on my laptop.  It was then just a question of going into Tools à Options within SSMS and defining the keyboard short cutA couple of notes You can’t amend the existing Alt+F1 entry to I went with Ctrl+F1.  You need to open new query window for the change to be picked upSo I can now highlight a table name and press Ctrl+F1 The completed script is attached.   Thanks go to Martin Bell who reviewed my stored procedure and give some valuable advice.

  Read the article

• Lost files after installing Ubuntu

  - by Joshua Rosato

  I installed Ubuntu on my laptop over windows, I had 2 partitions on one hard disk. It seems like my second partition is gone with all my files. How can I recover the old files? They weren't on the same partition as Windows. I read that the partition has probably just not been mounted so ran sudo fdisk -l to find all the partitions and then ran sudo mount, however I can't tell from the results of sudo mount what is not mounted and I am also unsure how to mount it once I find the unmounted partition. sudo fdisk -l - Results Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002c6dc Device Boot Start End Blocks Id System /dev/sda1 * 2048 486322175 243160064 83 Linux /dev/sda2 486324222 488396799 1036289 5 Extended /dev/sda5 486324224 488396799 1036288 82 Linux swap / Solaris sudo mount - Results /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/cgroup type tmpfs (rw) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) none on /sys/fs/pstore type pstore (rw) systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd) gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=joshy1)

  Read the article

• Inconsistent booting problem 12.04LTS on Asus U46E RAL7

  - by G. He

  The laptop is dual booting with windows 7 and ubuntu 11.10. For 11.10 to boot, I had to add 'nolapic' in GRUB boot options. I downloaded 12.04LTS LiveCD yesterday and made a CD and a bootable USB stick. With both USB and LiveCD, occasionally I can boot into 12.04. But many times, the boot process stuck at some point. For USB boot, sometime it works. But other times, it seems to stuck right after seeing the message: NMI watchdog enabled. takes one hw-pmu counted [0.408590] #2 The number in [] changes. Some times it stuck at #2, and sometimes at #3. For LiveCD boot, sometime it works. But when it stuck, it stuck at different places. At times, the boot process go directly to a blank screen with a blink '_' at up left corner. Sometime it went a bit further, after showing options to try/install ubuntu then stuck with a blank screen with blink '_'. Anything I can do to get around of this?

  Read the article

• Ubuntu 12.04 connected to wireless network but internet not working

  - by A.J.

  I can connect to my house's wireless network just fine, but when I'm connected I can't browse the web. Firefox starts connecting to a site and then just poops out. This doesn't happen on my roommates' computers (running Windows) or on our 3DSes, so I know it's just my laptop. I already tried sudo dhclient -r sudo dhclient sudo ifconfig eth0 down sudo ifconfig eth0 up Results of a few commands I was asked to run in comments: ping -c 2 4.2.2.2 PING 4.2.2.2 (4.2.2.2) 56(84) bytes of data. ^C --- 4.2.2.2 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms ping -c 2 google.com PING google.com (173.194.33.38) 56(84) bytes of data. --- google.com ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1006ms nm-tool NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 88:AE:1D:6B:4E:E7 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off - Device: wlan0 [JUSTICE] ----------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: connected Default: yes HW Address: 1C:65:9D:65:C6:31 Capabilities: Speed: 1 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) HOME-9B18: Infra, 00:26:F3:53:9B:18, Freq 2412 MHz, Rate 54 Mb/s, Strength 34 WPA WPA2 cougdad48 Network: Infra, 60:33:4B:E4:C4:5D, Freq 2437 MHz, Rate 54 Mb/s, Strength 22 WPA2 cougdad48 Guest Network: Infra, 66:33:4B:E4:C4:5D, Freq 2437 MHz, Rate 54 Mb/s, Strength 20 WPA2 belkin.ade: Infra, 94:44:52:FF:8A:DE, Freq 2457 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 *JUSTICE: Infra, 00:24:01:7B:9F:7E, Freq 2462 MHz, Rate 54 Mb/s, Strength 88 WEP CenturyLink: Infra, B2:B2:DC:8E:E2:58, Freq 2462 MHz, Rate 54 Mb/s, Strength 17 WPA WPA2 IPv4 Settings: Address: 192.168.0.11 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 (JUSTICE is my home's network.) ping -c 2 198.168.0.1 PING 198.168.0.1 (198.168.0.1) 56(84) bytes of data. --- 198.168.0.1 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms

  Read the article

• Sound not playing on Windows XP - SoundEffect or Song: Monogame

  - by ashes999

  I'm trying to integrate sound into my Monogame game. I don't have the content pipeline hack -- just straight Monogame (Beta 3) at this point. (I tried adding the content pipeline, but ran into some issues.) I added a .wav file to my /Content directory, and I can create and instantiate both SoundEffect and Song classes. However, both show durations of 00:00:00 (on a ten-second long file), and neither plays. I can call LoadContent without any issue. But when I call Play, nothing plays. I've tried a couple of different sounds, and different formats (MP3 and WAV) to rule that out. Only WAV seems to even load without crashing out, but it doesn't play. There seems to be a GitHub issue that fixes this problem in 2.5.1. Downgrading to 2.5.1 doesn't fix this problem; it seems like it's fixed in 3.0 (_data is set in the SoundEffect instance). This issue only occurs on Windows XP. I tested it on a Windows 7 laptop, and the sound plays fine.

  Read the article

• There's A Virtual Developer Day in Your Future

  - by OTN ArchBeat

  What are Virtual Developer Days? You really should know this by now. OTN Virtual Developer Days are online events created specifically for developers and architects, with a focus on no-fluff technical presentations, hands-on labs, and expert Q&A to sharpen your technical skills and bring you up to speed on the latest information on Oracle products and practical best practices for their use. The best part about OTN Virtual Developer Days is that you don't have to pack a suitcase or stand in line at an airport waiting for someone pat you down. Instead, you stay where you are, flip open your laptop, and prepare your brain for a massive skills injection. In the next few weeks you'll have two such chances to ramp up your skills. On Tuesday November 5, 2013 Harnessing the Power of Oracle WebLogic and Oracle Coherence will guide you through tooling updates and best practices for developing applications with WebLogic and Coherence as target platforms. This two-track event covers app design and development (Track 1) and building, deploying, and managing applications (Track 2). Each track includes three presentations plus a hands-on lab. [9am-1pm PT / 12pm-4pm ET / 1pm-5pm BRT] Register now This event will also be available in EMEA on December 3, 2013 {9am-1pm GMT / 1pm-5pm GST / 2:30pm-6:30 PM IST] On Tuesday November 19, 2103 Oracle ADF Development: Web, Mobile, and Beyond offers four tracks covering everything from the basics to advance skills for for application development using Oracle ADF and Oracle ADF Mobile. There are three sessions in each track, followed by hands-on labs in which try out what you've learned. [9am-1pm PT / 12pm-4pm ET/ 1pm-5pm BRT] Register now This event will also be available in APAC on Thursday November 21, 2013 [10am-1:30pm IST (India) / 12:30pm-4pm SGT (Singapore) / 3:30pm-7pm AESDT] and in EMEA on Tuesday November 26, 2013 [9am-1pm GMT / 1pm-5pm GST/ 2:30pm-6:30pm IST] Registration for both events is absolutely free. So what are you waiting for?

  Read the article

• Ubuntu 12.04 suddenly will not boot after compiz crash on lockscreen

  - by schonjones

  Yesterday i went to work and closed my laptop. When i got home I couldn't get the lock screen to come back up. ctrl+alt+f2 to get to a terminal and Tried to kill compiz, compiz was not running so I tried to restart it got an error opening the display so i tried to restart lightdm again couldn't open display. so I restarted and now I am stuck on the loading screen. I tried booting in recovery mode and all options hang except root, but i'm stuck with read only. booting from a live cd I can mount the drive but again stuck with read only. I'm completely stuck here. checking my default-display-manager returns "/usr/sbin/elsa" as the only line and can't edit it. I've got an 11.10 live cd and my /home is encrypted so i can't try to back anything up at the moment either. How can i resolve this or at the least back up some of my data? Please help!

  Read the article

• Unable to start lightdm but can startx

  - by wzyboy

  I am trying to make my own Live USB and I have successfully generated an ISO file with a newly installed, configured and customized Xubuntu 12.04 LTS installation. My problem is that, no matter I boot the ISO in VirtualBox or in GRUB with loopback, it just cannot start the lightdm. When booting, I can see the log messages on the screen, it stucks at Stopping System V compablities or Configuring Network security. And tty7 is frozen... If I switch to tty1, I can get a logged-in shell as ubuntu@ubuntu. The weird thing is: When I type sudo start lightdm or just sudo lightdm, it will switch to tty7 and the screen flashes. Then nothing happened. Return to tty1 and I can see lightdm running, process xxxx. But the process does not exist. It was just crashed immediately I think. (That's why the screen flashes.) However, when I type startx, I can get into the desktop! That's amazing for me. I am not very clear about the relationship between X Server and Display Manager, but I think lightdm is running when I see the desktop! Then, what's wrong with sudo start lightdm? I use this command every time I power on my laptop since I have a text parameter added in grub.cfg. It never "crashed immediately". I need to use sudo start lightdm because it gets me into "Xubuntu Session" instead of "Xfce Session", the prior is more beautiful... Could anyone help?

  Read the article

• Problem with sound driver

  - by JiminP

  I had problem that sound had lag in Flash. (Other than that, there was no problem.) On the internet, I found that installing OSS4 might help me. So I installed OSS4, but there was some problems (no sound on Flash, and couldn't use function key on the laptop - which is quite annoying), so I try to remove OSS4 and re-installing sound modules. After some mess-up, the whole sound was gone. I used Ubuntu for a year, but I don't know how to use the terminal well (All I know is basic commands like sudo, ls, or apt-get).. Now I'm trying to recover by following instructions at this page, but I have some problems... :( When I try to follow instructions: sudo aplay -l finds no sound drivers. find /lib/modules/'uname -r' | grep snd (backtick changed to ' due to code markup) returns nothing. When I try to do sudo apt-get install linux-restricted-modules-'uname -r' linux-generic, it says that it can't find linux-restricted-modules-3.0.0-13-generic package. lspci -v | grep -A7 -i "audio" returns this, which doesn't contain anything about the name of the driver. Writing sudo modprobe sn and pressing tab twice only returns sudo modprobe sn9c102. sudo aptitude --purge reinstall linux-sound-base alsa-base alsa-utils linux-image-'uname -r' linux-ubuntu-modules-'uname -r' libasound2 returns this, and didn't change non of above. sudo apt-get install linux-alsa-driver-modules-$(uname -r) fails because it can't find the package linux-alsa-driver-modules-3.0.0-13-generic. Compiling ALSA driver doesn't work. When I try to make, it says that /lib/modules/3.0.0-13-generic/build/include/linux/modversions.h doesn't exist. I'm using Ubuntu 11.10. Can anyone help me? I can re-install Ubuntu, but I don't want to....

  Read the article

< Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >