Search Results

Search found 8343 results on 334 pages for 'laptop disasters'.

Page 273/334 | < Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >

  • 12.10 visual performance using nvidia driver

    - by user100485
    My fresh ubuntu 12.10 install is slow, not something extreme but dragging windows, switching workspaces and things like that are just slow and look horrible. it feels like the fps is dropping in a game. Doing some photoshop work in windows was even a relief! This effect gets worse if I connect my external monitor. My system is an intel pentium dual core T4500 with 4gb memory and a GeForce 8200M G/integrated/SSE2 graphics chip. Nothing fancy but should be able to run ok. My "experience" in ubuntu is set to standard. (MSI cr500 laptop) I've installed the nvidia drivers, tried current and experimental and the experimental drivers seem to perform a bit better but overall bad anyway. I set the mode to adaptive in the nvidia-settings tool and it goes to maximum setting directly and doesn't come back. Using htop I found out that compiz or the X server always use a few percent of my cpu, more than I think it should and the time consumed is 5:18 for compiz, 4:33 for /usr/bin/X and 2:41 for google chrome(about 30 tabs open so not too strange I think.) What can I do to increase the visual performance cause this makes me not want to use ubuntu in public!

    Read the article

  • How to Hibernate from .NET Apps and How to enable Hibernate in Windows XP

    The usage of Computer desktop or laptop is increased all around the world phenomenally. This link gives you the picture on how power consumption is for various devices we use daily. to reduce the power consumption Hibernate is one of the best way provided by default in Windows Vista or Windows 7. Hibernate feature enables you to close the machine without closing your applications, that means the applications will be restored as they were once we restart the machine. Hibernate feature is not enabled in Windows XP by default. I’ve seen many people that they run (do not switch off) the machines months and months as they do not want to close the windows or applications running in Windows XP. below are the steps to enable Hibernate in Windows XP. Right click on Desktop. Click on properties. Go to screen save tab. Click on power button Select Hibernate tab Check the checkbox “Enabled Hibernate” Apply the settings. Now when you try to shutdown, “Shut down windows” dialog shows “Hibernate” options. Now you can safely close the machine without closing your applications or windows as they will be restored once you on the machine. </SPAN? Some time you might want to provide this future programmatically for the applications you develop for windows. Generally you might want to provide this option in windows applications where process needs huge time. Download managers are the one of the best example. below is the code to do a Hibernate from the .NET code. using System.Windows.Forms;namespace CodeKicks.WinApp.Machine{ public static class MyMachineHelper { public static void DoHibernate() { //Application.SetSuspendState(PowerState.Suspend, true, false); Application.SetSuspendState(PowerState.Hibernate, true, false); } }} span.fullpost {display:none;}

    Read the article

  • Firefox 15 hangs with Ubuntu kernel update

    - by Marty
    I recently ran updates and it told me that in order to get those updates I had to update my kernel. I did that and also updated Firefox to 15. Since then Firefox hangs/gray screens sites I go to. This lasts anywhere from 5-10 seconds to 2-3 minutes. I have restarted Firefox with all add-ons disabled but it still did the same thing. I found a bug report on Launchpad that sounded like what was happening with me, but I haven't received any error codes, just the hanging/frozen screens. Also it seems that it ups my CPU making the rest of Ubuntu lag while Firefox is hung. I would guess the cause is a conflict between the updated kernel and the updated Firefox, but I'm still fairly new at Ubuntu and not sure where to go from here. Is there anything else to try? My Toshiba laptop specs are: Ubuntu 12.04 (32 bit) Linux 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux Firefox 15.0.1 Intel® Pentium(R) Dual CPU T3400 @ 2.16GHz × 2 Mobile Intel® GM45 Express Chipset x86/MMX/SSE2 Thanks!

    Read the article

  • Wireless not detected on an hp Pavilion g6

    - by Earl Larson
    I just bought an HP Pavilion g6 laptop and I installed Natty Narwhal alongside Windows 7. In Windows 7, my WiFi works perfect but in Ubuntu it absolutely (no matter what I do) won't detect my home WiFi network. Here is the output of "lspci": earl@ubuntu:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 03:00.0 Network controller: Ralink corp. Device 5390 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01) earl@ubuntu:~$

    Read the article

  • Screen Resolution stuck at 640x480 after installing Bumblebee

    - by Saurabh Agarwal
    I have a Dell XPS 15z laptop. As you can see here, there are some issues with NVidia drivers. The site recommends installation of Bumblebee (instructions given in the link). I am posting it again for ease: $ sudo add-apt-repository ppa:bumblebee/stable $ sudo apt-get update && sudo apt-get upgrade $ sudo apt-get install bumblebee bumblebee-nvidia $ sudo usermod -a -G bumblebee $USER After restarting the computer however, the screen resolution was stuck at 640x480 and I got the following error message as soon as I logged in: **Could not apply the stored configuration for monitors** none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Prior to the update, the display was absolutely normal and thus there is no doubt about the cause. Albeit, there was no support for graphic drivers. In case it helps, some features of graphics drivers seem to be functional after bumblebee, ie, all features are in order except for the resolution. And if the resolution can't be fixed, please suggest a way to retract the changes so that atleast the prior state may be reachieved. Any help in the matter would be highly appreciated.

    Read the article

  • Can't boot into windows7/ubuntu 12.04 after running boot-repair

    - by Rini
    I have installed Ubuntu 12.04 on my preinstalled windows 7 Sony vaio E series laptop following instructions here: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/ Everything went well and I am able to boot in to windows after complete installation of Ubuntu. Now following instructions on web I tried to add Ubuntu to my BIOS using Easy BCD (but forget to add windows 7 entry). As a result, I loose windows 7 OS and can't boot in to either OS then I successfully repaired windows 7 using recovery CD. Now my problem is that I can't reinstall Ubuntu 12.04 using Live CD it halts every time before disk partition step giving error. "ubi-partman crashed". "ubi-partman failed with exit code 141. further information may be found in /var/log/syslog. Do you want to try running this step again before continuing? If you do not, your installation may fail entirely or may be broken." and, any choice to continue will result in the same error. After that following some post solutions I ran boot-repair commands in terminal ( in Try Ubuntu mode) and got the following URL: http://paste.ubuntu.com/1206434/ Now, after restart I can't boot into either Windows or Ubuntu. Even any attempt to run Windows repair is failed and I got the message : 'No operating System found' I don't know what went wrong after running boot-repair command. Please help in solving this issue. Thanks and Regards, R Shukla

    Read the article

  • I can't install Ubuntu on my Dell Inspiron 15R at all

    - by Kieran Rimmer
    I'm attempting to install Ubuntu 12.04LTS, 64 bit onto a Dell Inspiron 15R laptop. I've shrunk down one of the windows partitions and even used gparted to format the vacant space as ext4. However, the install disk simply does not present any options when it comes to the partitioning step. What I get is a non-responsive blank table As well as the above, I've changed the BIOS settings so that USB emulation is disabled (as per Can't install on Dell Inspiron 15R), and changed the SATA Operation setting to all three possible options. Anyway, the install CD will bring up the trial version of ubuntu, and if I open terminal and type sudo fdisk -l, I get this: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xb4fd9215 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility Partition 1 does not start on physical sector boundary. /dev/sda2 * 81920 29044735 14481408 7 HPFS/NTFS/exFAT /dev/sda3 29044736 1005142015 488048640 7 HPFS/NTFS/exFAT /dev/sda4 1005154920 1953520064 474182572+ 83 Linux Disk /dev/sdb: 32.0 GB, 32017047552 bytes 255 heads, 63 sectors/track, 3892 cylinders, total 62533296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb4fd923d Device Boot Start End Blocks Id System /dev/sdb1 2048 16775167 8386560 84 OS/2 hidden C: drive If I type 'sudo parted -l', I get: Model: ATA WDC WD10JPVT-75A (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 41.1MB 41.1MB primary fat16 diag 2 41.9MB 14.9GB 14.8GB primary ntfs boot 3 14.9GB 515GB 500GB primary ntfs 4 515GB 1000GB 486GB primary ext4 Model: ATA SAMSUNG SSD PM83 (scsi) Disk /dev/sdb: 32.0GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 8589MB 8588MB primary Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! I've also tried a Kubuntu 12.04 and Linuxmint install disks, wityh the same problem. I'm completely lost here. Cheers, Kieran

    Read the article

  • Ubuntu 12.10 unmet dependencies

    - by John
    I have Ubuntu 12.10 with 3.2.0.24-generic #39-Ubuntu running on a Dell Inspiron 700m laptop. I have unmet dependencies as follows: root@John-700m:/home/John# sudo apt-get remove --purge linux-image-3.5.0-{18,27,31,34}-generic Reading package lists... Done Building dependency tree Reading state information... Done Package 'linux-image-3.5.0-18-generic' is not installed, so not removed Package 'linux-image-3.5.0-27-generic' is not installed, so not removed Package 'linux-image-3.5.0-31-generic' is not installed, so not removed Package 'linux-image-3.5.0-34-generic' is not installed, so not removed You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-generic : Depends: linux-image-generic but it is not going to be installed linux-image-extra-3.5.0-18-generic : Depends: linux-image-3.5.0-18-generic but it is not going to be installed linux-image-extra-3.5.0-27-generic : Depends: linux-image-3.5.0-27-generic but it is not going to be installed linux-image-extra-3.5.0-31-generic : Depends: linux-image-3.5.0-31-generic but it is not going to be installed linux-image-extra-3.5.0-34-generic : Depends: linux-image-3.5.0-34-generic but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). I tried to remove the packages, but I still get the same error message. Any help would certainly be appreciated. @Eric, well noted. Here is the reults: model name : Intel(R) Pentium(R) M processor 1.60GHz flags : fpu vme de pse tsc msr mce cx8 mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe up bts est tm2 Thanks again. @Eric, If I need to downgrade to Ubuntu 12.04 from 12.10, can I do it without having to mess my current partition or files? I also have Windows XP running on the machine. Best. @Eric, if you are online, I could use your help (or anybody's else). I installed the package for non-pae unit and I still get the same error. Any suggestions? Thanks

    Read the article

  • early audio offset in Audacity and VLC, but not Banshee

    - by reek
    I'm editing audio files with speech in Audacity, marking particular types of speech. I just noticed that files edited in Windows have different intervals marked than files edited in Ubuntu. After testing and confirming this error, it seems that the audio playback in Ubuntu clips the sound too early from the end (early offset), which causes the person doing the editing to mark the interval wrongly. Interestingly, the error appears in Audacity and VLC (which I sometimes use for playback), but NOT Banshee. Since both Audacity and VLC have this problem, I assume it is not application-specific. I don't know why Banshee handles this without problem though... Are there any ALSA or Pulseaudio settings that are likely to cause this problem (I know very little about either)? The task itself does not appear to consume large amounts of resources, but I am on an old laptop, so here are my specs: Ubuntu 11.10. Dell XPS m1210 1.6 GHz Intel Core, 2 x 512 Mb 667 MHz RAM, Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01). Audacity settings: Device Interface: ALSA (cannot select anything else)

    Read the article

  • Restore audio settings - cannot open mixer: No such file or directory

    - by Alfred M.
    The internal speaker of my laptop never functionned under Ubuntu. I tried to follow indication on the web and now the jack audio does not work either. The graphic interface for audio management now displays a 'dummy output' instead of the three possible outputs I used to have (one of them was working for the jack output). In a terminal alsamixer raises an error: cannot open mixer: No such file or directory I did try to remove and reinstall alsa-utils but it did not change anything. This happened after a failed atempt to install alsa-driver-linuxant_1.0.23.1_all.deb from here. My sound card seems to be not recognised anymore. After reboot I have no more the sound icon in menu bar the upper right corner. I think I have removed my sound card driver. Indeed, the command sudo lshw -class multimedia indicated audi device as unclaimed. Any idea how I could revert to a better situation (that is jack support and alsa working)? EDIT: The command lspci -nnk | grep -iEA3 audio gives lspci -nnk | grep -iEA3 audio 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:1893] 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03)

    Read the article

  • How to partition Seagate FreeAgent GoFlex 2TB hard disk?

    - by balki
    Hi I bought a new Seagate 2TB external hard disk. I opened the drive's application in my virtual windows, did product registration using the application present in it. I have few questions on how best to use it. The drive by default has some files and folders - setup.exe, System Volume Information, USB 3.0 PC Card Adapter etc,. I copied all the files to my laptop. Is it safe to delete these files? It has a dash board for windows which allows to tune power options, test the drive etc. Will I be able to use the dash board if I put back all these files and mount on windows again? I want to partition and format the hard disk. Data I like to store is Around 10 to 20 GB Files - Virtual box images. Around 4GB Files - Dvd images. Other Movies and personal Files. What is the best filesystem to store very huge files like 10 to 20GB files. So that they are written and accessed fast also best uses the drive's capacity. If I leave one of the partition as ntfs and others to different files systems, will it be able to mount on windows and Will I be able to use the device's dash board? Note: I dont need any encryption for my data. Any other advice on using the hard disk is also welcome.

    Read the article

  • Dualboot 12.04/windows 7 After installation from USB reboot straight to Windows with no option to select ubuntu and no boot loader

    - by Alkatraz
    windows 7 home premium intel i5 2500k CPU ASUSP8Z68-V PRO Motherboard GeForce GTX 570 GPU corsair 120Gb SSD (windows 7 os) WD 1tb HDD I select the USB drive in the BIOS and boot to it and choose install. i select to manually configure partitions, partition the 200gb of unallocated space on my 1Tb HDD into 16Gb swap file 30Gb / extf4 and 154Gb /home extf4. I make sure that the boot loader is installed to corsair 120Gb SSD (where the windows boot is) and installation goes smoothly. When i reboot after install it runs through bios strait into windows. I have tried upwards of a dozen times and i have also tried with linuxmint. I have also redownloaded the ISO and used two different programs to create the live usb. the installation seems to go well as i can see the partitions i have created in the windows device manager after install http://imgur.com/Wp0V1 I currently run lubuntu on my laptop but it is not a dual boot. i'm assuming this is a boot loader issue and i am assuming that inside those partitioned files in my screenshot there is a working OS of ubuntu 12.04 i just have no way of getting to it.

    Read the article

  • Booting sequence. Ubuntu 12.04 installation and cohabitation with former OSes

    - by Stephane Rolland
    I am on the brink of installing Ubuntu 12.04 Precise Pengolin on the first primary partition of my hard-drive. (A day in History for me since I had always kept a MS windows at this first place). But I have some fears: This is my last computer available (In the past I used to have 2 or even 3 machines so I could always un/plug HDs for recovery operations and rescue) The current booting sequence is not straight forard. So as to explain the boot sequence let me briefly sum-up the history of this laptop computer. It was a dedicated Windows Vista computer. 1st and only Primary partition. Then I added Windows 7 (on the 2nd primary partition) letting the Windows Vista Boot Loader manage the boot sequence. Then I added Ubuntu 10.04 Lucid Lynx on the 1st sub-partition of the Extended Partitionm asking Grub to be the boot loader. But when I ask Grub to launch windows it launches the Vista BootLoader that manages the choice betzeen Vista and 7. So in theory Grub is on the MasterBootRecord - though I understand where the Vista BootLoader remains. Now, I will no longer use the Ubuntu 10.04 ( on extended partition) and also the Windows vista (on the first primary partition). I will install Ubuntu 12.04 on the First Primary, asking it to install a new bootloader. I want to keep the Windows 7 that is already on the Second Primary partition. And I want it to be loaded by the Ubuntu Boot loader(I don4t knoz zhich is included in this version)... And I am afraid the last point will not work.

    Read the article

  • how do I make my Dualshock 3 gamepad work in Ubuntu 14.04?

    - by user290527
    When my desktop computer was running Ubuntu 12.04, my PS3 controllers would work with USB. I didn't need to do any special setup. I could just plug it in before I start SuperTuxKart and it would recognize it. I can also do this on my laptop (still running 12.04). Since I gave my desktop a fresh install of Ubuntu 14.04, the controller would never work. I have played with some installed software that I found when looking for information. Here is what I get with xboxdrv: liam@Liam-CustomDesktop:~$ sudo xboxdrv --detach-kernel-driver xboxdrv 0.8.5 - http://pingus.seul.org/~grumbel/xboxdrv/ Copyright © 2008-2011 Ingo Ruhnke <[email protected]> Licensed under GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details. Controller: PLAYSTATION(R)3 Controller Vendor/Product: 054c:0268 USB Path: 003:012 Controller Type: Playstation 3 USB Your Xbox/Xbox360 controller should now be available as: /dev/input/js0 /dev/input/event16 Press Ctrl-c to quit, use '--silent' to suppress the event output So the existence of this controller is acknowledged at on my computer. But it never works for input. In my old installation, I didn't even need to get software like xboxdrv for it to work. I have never tried bluetooth on either computer, but I don't think I even have that on my desktop. So now, how do I make my gamepad work in Ubuntu 14.04?

    Read the article

  • How to change system time or force a time sync

    - by cpury
    My laptop is probably running out of CMOS battery, I know I have to fix it soon, but until then, this very annoying issue keeps me from using it. Scenario: My system clock is reset to 15/12/08 11:00 AM every time I turn on my computer. This has all sorts of side-effects, one of the more annoying being that I can't log into my gmail. At first I just waited for a time sync to happen, as I have that activated and all. It never happened. I googled and didn't find any way of enforcing a time sync, which I found very strange. Is there really none? Setting the time and date by hand is also a problem. For my 12.10 installation, the time & date settings are bugged. I remember it being for my last, older installation as well, though. Of course the easiest way should be to just manually edit the date and time fields by entering a new date. This is possible in theory, but the changes are reverted as soon as the text boxes loose focus. The other way to do it is to click the +-buttons for a long, long time. The first time I did that, the changes weren't stored either. I found out that afterwards I have to switch from manual to internet-sync mode and wait ~5 seconds until the in the top left corner of my system the new time is shown, or otherwise it won't have effect. So a nice solution would be one of the following: Setting the time/date by hand, maybe via terminal, so I can just enter the right values. Or, a command that would enforce an immediate time sync, that I can run after booting. I know I have to change the batteries soon, but this is seriously keeping me from working...

    Read the article

  • Nautilus crashes after Ubuntu Tweak Package Cleaner

    - by Ka7anax
    Few days ago I started having some problems with nautilus. Basically when I'm trying to get into a folder it crashes. It's not happening all the time, but in 85% it does... Sometimes, after the crash all my desktop icons are also gone. The only thing that I think causes this is Ubuntu Tweak - I'm not sure, but the issues started after I did the Package cleaner from Ubuntu Tweaks... Any ideas? -------- EDIT ---------- First time, after running the command (nautilus --quit; nautilus --no-desktop) 3 times all the system crashed (except the mouse, I could move the mouse). After restart I run it and obtain this: ----- Initializing nautilus-gdu extension Initializing nautilus-dropbox 0.6.7 (nautilus:2966): GConf-CRITICAL **: gconf_value_free: assertion value != NULL' failed (nautilus:2966): GConf-CRITICAL **: gconf_value_free: assertionvalue != NULL' failed Nautilus-Share-Message: Called "net usershare info" but it failed: 'net usershare' returned error 255: net usershare: cannot open usershare directory /var/lib/samba/usershares. Error No such file or directory Please ask your system administrator to enable user sharing. and then this: cristi@cris-laptop:~$ nautilus --quit; nautilus --no-desktop (nautilus:3810): Unique-DBus-WARNING **: Error while sending message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

    Read the article

  • Can windows XP be better than any Ubuntu (and Linux) distro for an old PC?

    - by Robert Vila
    The old laptop is a Toshiba 1800-100: CPU: Intel Celeron 800h Ram 128 MB (works ok) HDD: 15GB (works ok) Graphics adapter: Integrated 64-bit AGP graphics accelerator, BitBIT, 3D graphic acceleration, 8 MB Video RAM Only WindowsXP is installed, and works ok: it can be used, but it is slow (and hateful). I thought that I could improve performance (and its look) easily, since it is an old PC (drivers and everything known for years...) by installing a light Linux distro. So, I decided to install a light or customized Ubuntu distro, or Ubuntu/Debian derivative, but haven't been successful with any; not even booting LiveCDs: not even AntiX, not even Puppy. Lubuntu wiki says that it won't work because the last to releases need more ram (and some blogs say much more cpu -even core duo for new Lubuntu!-), let alone Xubuntu. The problems I have faced are: 1.There are thousands of pages talking about the same 10/15 lightweight distros, and saying more or less the same things, but NONE talks about a simple thing as to how should the RAM/swap-partition proportion be for this kind of installations. NONE! 2.Loading the LiveCD I have tried several different boot options (don't understand much about this and there's ALWAYS a line of explanation missing) and never receive error messages. Booting just stops at different stages but often seems to stop just when the X server is going to start. I am able to boot to command line. 3.I ignore whether the problem is ram size or a problem with the graphics driver (which surprises me because it is a well known brand and line of computers). So I don't know if doing a partition with a swap partition would help booting the LiveCD. 4.I would like to try the graphical interface with the LiveCD before installing. If doing the swap partition for this purpose would help. How can I do the partition? I tried to use Boot Rescue CD, but it advises me against continuing forward. I would appreciate any ideas as regards these questions. Thank you

    Read the article

  • Installer doesn't display partition I want to install to

    - by Aditya
    While performing a Ubuntu 10.10 installation on my laptop, it doesn't show partitions pertaining to the PC. My PC configuration is as follows : HP Pavilion dv6 - 2020AX AMD Turion II Dual Core Mobile Processor M500 4 GB RAM OS Installed : Windows 7 500 GB Hard drive partitioned as follows : C : 227 GB (Free : 142 GB) D : 11.9 GB (Free : 1.98 GB) - Recovery F : 174 GB (Free : 18 GB) G : 50.5 GB (Free : 50.4 GB) So, I want to perform a Dual-boot installation on my PC, so that Ubuntu resides in the free disk space G:. Therefore, I started the Ubuntu 10.10 installation and select the manual partitioning feature in the installation. However, in the 'Allocate Drive Space' section of the installation, following partitions information is displayed: Partition Type Size Used /dev/sda /dev/sda1      1 MB    unknown /dev/sda2    ntfs    208 MB   unknown /dev/sda3   ntfs    244813 MB    168540 MB /dev/sda4    ntfs    255083 MB   3221 MB where /dev/sda - 500 GB So, what exactly is the problem? What is it should I do to install Ubuntu 10.10 in the G: disk space? Why are the partitions not being shown as the way they should be? Any Suggestions. Thank you for the help.

    Read the article

  • Allow JMX connection on JVM 1.6.x

    - by Martin Müller
    While trying to monitor a JVM on a remote system using visualvm the activation of JMX gave me some challenges. Dr Google and my employers documentation quickly revealed some -D opts needed for JMX, but strangely it only worked for a Solaris 10 system (my setup: MacOS laptop monitoring SPARC Solaris based JVMs) On S11 with the same opts I saw that "my" JVM listening on port 3000 (which I chose for JMX), but visualvm was not able to get a connection. Finally I found out that at least my S11 installation needed an explicit setting of the RMI host name. This what finally worked:         -Dcom.sun.management.jmxremote=true \        -Dcom.sun.management.jmxremote.ssl=false \        -Dcom.sun.management.jmxremote.authenticate=false \        -Dcom.sun.management.jmxremote.port=3000 \        -Djava.rmi.server.hostname=s11name.us.oracle.com \ Maybe this post saves someone else the time I spent on research 

    Read the article

  • Presario r3000 hangs on boot to Ubuntu 12.04

    - by Chris
    I have a Compaq Presario r3000 laptop with Ubuntu 12.04 32 bit. 1.2GB RAM, with a nvidia Gforce 420 Go with 32MB RAM. It hangs on bootup about 3 out of 4 times at either the purple screen, or with a cursor in the upper left corner. Booting without a splash screen shows it hanging after attempting to initialize the floppy controller. Unity has never booted to 3D either, only 2D, with the additional drivers always failing to install. I searched all over this board and found similar issues, and tried everything there. Extensive vid driver install and uninstalls. Network issues that I've since resolved. I even found a very similar topic with a fix that didn't work. I'll probably try a clean install today (given how much I've probably messed up), and I would really appreciate any ideas. I'm fairly new to Ubuntu, so if you would like to see any error logs or configs, please walk me through exactly how to get and post them here. Thanks.

    Read the article

  • installing ubuntu on SSD

    - by kunal
    Going to install Ubuntu 10.10 on new intel x25M 80GB SSD. It will be fresh install. I have been googling for past few days and getting overwhelming articles/blogs/Q&As. One particularly very useful being: Optimize for SSD (I could not post other links as i dont have enough credits) But with so many suggestions and differences of opinions (on different links) this simple OS install process seems to be daunting task to me and I really want to stick with ubuntu (although have used for very short period of time). Can someone help me by answering few questions (yes they are repeated as i couldnt comprehend the answers elsewhere) which file system (ext2/3/4 or something else)? (consider SSD life) can it be changed after installation? should i partition the disk? (as we do in traditional HDD) for now, no plan of dual booting. Only ubuntu will live on scarce space of 80GB SSD. i have 2 GB RAM, should i still allocate swap space (if i dont allocate swap space, can i still hibernate the machine)? will swap space impact SSD life? should i consider putting additional 1GB RAM to avoid swap space? Linux experience - absolute novice intended usage - heavy browsing, programming, regular video/music and some other non-CPU/RAM-intensive programs. will backup big files to an external hard drive. laptop config - 3 yr old vaio, core2 duo, 2GB RAM Please pardon the repetition and i really appreciate anyone helping me getting started with ubuntu.

    Read the article

  • Source-control your BI Publisher reports

    - by Dmitry Nefedkin
    Version control systems (VCS) like Subversion, Git and the others has been widely adopted and became the must-have tool in any software development project. Source artifacts and checked out, modified, checked in, all the history of changes is tracked by the VCS.  But what if the development tool stores the source/configuration artifacts not in your laptop's hard drive, but in some shared repository instead? Well, we definitely need a way for export/import our artifacts from/to this repository.   Oracle BI Publisher report development approach is based on such a shared repository model (catalog), and starting from BI Publisher 11.1.1.5 Oracle ships Catalog Utility, which can be utilized to export/import the reports from the command line.  To start using the BI Publisher Catalog Utility you should: Go to the file system of the server where BI Publisher binaries has been installed and locate the following file: <MW_HOME>/Oracle_BI1/clients/bipublisher/BIPCatalogUtil.zip Copy the file to your local filesystem and unzip it. I will refer to this unzipped directory as <BIP_CLIENT_DIR> below If you do not want to pass server BI Publisher server URL, username and password during each invocation, modify the corresponding values inside <BIP_CLIENT_DIR>/config/xmlp-client-config.xml Open the terminal window and go to <BIP_CLIENT_DIR>/bin Make sure that the following environment variables are set: JAVA_HOME, ORACLE_HOME Now it's time to run the utility: if you are on Linux - just run BIPCatalogUtil.sh and pass the parameters according to the utility documentation if you are on MS Windows the bad news are that the command script for MS Windows is missing, and support.oracle.com note 1333726.1 says that a temporary solution is "create a .cmd file by setting up a classpath and copying the same commands from the .sh script". The good news are that I've created this script already,  please download the it from GitHub Hope you will find this utility useful during you day-by-day BI Publisher development. 

    Read the article

  • BCM4306, b43 legacy driver installed, but "firmware missing" error

    - by ScrollerBlaster
    I have the following wireless hardware on a Compaq evo N600c laptop running lubuntu latest. ciaran@compaq:~$ lspci -vvnn | grep 14e4 03:00.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03) Following the instructions from here : http://www.linuxwireless.org/en/users/Drivers/b43#b43_and_b43legacy I opted for the legacy firmware installer, following instructions for internet install to the letter (with no errors). i.e. I successfully installed sudo apt-get install firmware-b43legacy-installer In the nm-applet I now get Wireless networks device not ready (firmware missing) I open up Additional Drivers, but the list is empty. I have commented out this line in /etc/modprobe.d/blacklist.conf #blacklist bcm43xx Contents of firmware dir: ciaran@compaq:/etc/modprobe.d$ sudo ls /lib/firmware/b43legacy/ [sudo] password for ciaran: a0g0bsinitvals2.fw a0g0initvals5.fw b0g0bsinitvals2.fw b0g0initvals5.fw ucode11.fw ucode5.fw a0g0bsinitvals5.fw a0g1bsinitvals5.fw b0g0bsinitvals5.fw pcm4.fw ucode2.fw a0g0initvals2.fw a0g1initvals5.fw b0g0initvals2.fw pcm5.fw ucode4.fw Edit: from dmesg: [ 4460.193382] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 4460.193393] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 4460.193401] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. Yours in hope.

    Read the article

  • How to disable "N" Wireless Mode RTL8192 (Thinkpad Edge 15 Core i5) in natty

    - by Gustavo Rubio
    I've seen many owners of thinkpad edges which are supossed to be linux-friendly having problems with wireless adapter. I've found several links inside askubuntu and in ubuntuforums which have a lot of work-arounds for those problems, mine seems to be wierd though. I use my laptop on both my office and at home. At home I have a router which is A/B/G and here at home the wireless connection works just fine, using a WEP key. But in work I have a B/G/N wireless router and it doesn't work, my guess is that this adapter works with N modes but somehow this is buggy in the bundled driver in natty. I've tried to disable the "N" mode in the router but that didn't work. Later I went to realtek website, downloaded their driver and compiled myself, kinda seems to work most of the time but sometimes some websites keep trying to load or load just parts of it and images start to look like their links are broken and so on, much like what you get when you were loading a page and suddenly the connection is lost. This problem, as I said, is only using the realtek driver from their website. Dmesg gives me this a lot of these: [ 5869.049454] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5 [ 5879.240563] DHCP pkt src port:68, dest port:67!! So I thougth I might as well switch back to the original driver which seems to work just fine on A/B/G wireless networks but not on N networks so if anybody knows how to disable that mode from within the driver please let us know :) Thanks in advance! PS: I do found a link to a similar question and it was answered but let me remind you I'm NOT using the intel version of wireless for my thinkpad but the realtek (RTL8192SvB)

    Read the article

  • Upgrade won't allow second display to go to 1920x1080

    - by Rick
    I just upgraded to 10.10 last night and I'm having issues now with dual display from my laptop dock. This was working in the previous release with a manual xrandr command: xrandr --output LVDS1 --off --output DP1 --mode 1920x1080 && xrandr --output VGA1 --mode 1920x1080 --left-of DP1 When I run this now, the DP1 output doesn't have a mode for 1920x1080. The two displays are a matched pair of dell 22" that are both 1920x1080. When I attempt to manually add the mode xrandr --addmode DP1 1920x1080 and rerun my command, I lose both displays altogether. I have to then blindly reset to just one of them in order to get display back. If I avoid the 1920 and just attempt to setup DP1 at the 1280x1024 max it thinks it has, then the second display will come up, but obviously looks horrible since it's non-native resolution. I've grabbed the updated xorg intel driver from the stable X ppa and am running: 2:2.13.901-2ubuntu2~xup~maverick xrandr output Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 LVDS1 connected (normal left inverted right x axis y axis) 1280x800 60.2 + 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI1 disconnected (normal left inverted right x axis y axis) DP1 connected (normal left inverted right x axis y axis) 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1

    Read the article

< Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >