Search Results

Search found 7583 results on 304 pages for 'roger guess'.

Page 275/304 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

• SQL SERVER – Retrieve and Explore Database Backup without Restoring Database – Idera virtual databas

  - by pinaldave

  I recently downloaded Idera’s SQL virtual database, and tested it. There are a few things about this tool which caught my attention. My Scenario It is quite common in real life that sometimes observing or retrieving older data is necessary; however, it had changed as time passed by. The full database backup was 40 GB in size, and, to restore it on our production server, it usually takes around 16 to 22 minutes, depending on the load server that is usually present. This range in time varies from one server to another as per the configuration of the computer. Some other issues we used to have are the following: When we try to restore a large 40-GB database, we needed at least that much space on our production server. Once in a while, we even had to make changes in the restored database, and use the said changed and restored database for our purpose, making it more time-consuming. My Solution I have heard a lot about the Idera’s SQL virtual database tool.. Well, right after we started to test this tool, we found out that it really delivers what it promises. Using this software was very easy and we were able to restore our database from backup in less than 2 minutes, sparing us from the usual longer time of 16–22 minutes. The needful was finished in a total of 10 minutes. Another interesting observation is that there is no need to have an additional space for restoring the database. For complete database restoration, the single additional MB on the drive is not required anymore. We can use the database in the same way as our regular database, and there is no need for any additional configuration and setup. Let us look at the most relevant points of this product based on my initial experience: Quick restoration of the database backup No additional space required for database restoration virtual database has no physical .MDF or .LDF The database which is restored is, in fact, the backup file converted in the virtual database. DDL and DML queries can be executed against this virtually restored database. Regular backup operation can be implemented against virtual database, creating a physical .bak file that can be used for future use. There was no observed degradation in performance on the original database as well the restored virtual database. Additional T-SQL queries can be let off on the virtual database. Well, this summarizes my quick review. And, as I was saying, I am very impressed with the product and I plan to explore it more. There are many features that I have noticed in this tool, which I think can be very useful if properly understood. I had taken a few screenshots using my demo database afterwards. Let us see what other things this tool can do besides the mentioned activities. I am surprised with its performance so I want to know how exactly this feature works, specifically in the matter of why it does not create any additional files and yet, it still allows update on the virtually restored database. I guess I will have to send an e-mail to the developers of Idera and try to figure this out from them. I think this tool is very useful, and it delivers a high level of performance way more than what I expected. Soon, I will write a review for additional uses of SQL virtual database.. If you are using SQL virtual database in your production environment, I am eager to learn more about it and your experience while using it. The ‘Virtual’ Part of virtual database When I set out to test this software, I thought virtual database had something to do with Hyper-V or visualization. In fact, the virtual database is a kind of database which shows up in your SQL Server Management Studio without actually restoring or even creating it. This tool creates a database in SSMS from the backup of the same database. The backup, however, works virtually the same way as original database. Potential Usage of virtual database: As soon as I described this tool to my teammate, I think his very first reaction was, “hey, if we have this then there is no need for log shipping.” I find his comment very interesting as log shipping is something where logs are moved to another server. In fact, there are no updates on the database from log; I would rather compare it with Snapshot Replication. In fact, whatever we use, snapshot replicated database can be similarly used and configured with virtual database. I totally believe that we can use it for reporting purpose. In fact, after this database was configured, I think the uses of this tool are unlimited. I will have to spend some more time studying it and will get back to you. Click on images to see larger images. virtual database Console Harddrive Space before virtual database Setup Attach Full Backup Screen Backup on Harddrive Attach Full Backup Screen with Settings virtual database Setup – less than 60 sec virtual database Setup – Online Harddrive Space after virtual database Setup Point in Time Recovery Option – Timeline View virtual database Summary No Performance Difference between Regular DB vs Virtual DB Please note that all SQL Server MVP gets free license of this software. Reference: Pinal Dave (http://blog.SQLAuthority.com), Idera (virtual database) Filed under: Database, Pinal Dave, SQL, SQL Add-On, SQL Authority, SQL Backup and Restore, SQL Data Storage, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, SQLAuthority News, T SQL, Technology Tagged: Idera

  Read the article

• Guarding against CSRF Attacks in ASP.NET MVC2

  - by srkirkland

  Alongside XSS (Cross Site Scripting) and SQL Injection, Cross-site Request Forgery (CSRF) attacks represent the three most common and dangerous vulnerabilities to common web applications today. CSRF attacks are probably the least well known but they are relatively easy to exploit and extremely and increasingly dangerous. For more information on CSRF attacks, see these posts by Phil Haack and Steve Sanderson. The recognized solution for preventing CSRF attacks is to put a user-specific token as a hidden field inside your forms, then check that the right value was submitted. It's best to use a random value which you’ve stored in the visitor’s Session collection or into a Cookie (so an attacker can't guess the value). ASP.NET MVC to the rescue ASP.NET MVC provides an HTMLHelper called AntiForgeryToken(). When you call <%= Html.AntiForgeryToken() %> in a form on your page you will get a hidden input and a Cookie with a random string assigned. Next, on your target Action you need to include [ValidateAntiForgeryToken], which handles the verification that the correct token was supplied. Good, but we can do better Using the AntiForgeryToken is actually quite an elegant solution, but adding [ValidateAntiForgeryToken] on all of your POST methods is not very DRY, and worse can be easily forgotten. Let's see if we can make this easier on the program but moving from an "Opt-In" model of protection to an "Opt-Out" model. Using AntiForgeryToken by default In order to mandate the use of the AntiForgeryToken, we're going to create an ActionFilterAttribute which will do the anti-forgery validation on every POST request. First, we need to create a way to Opt-Out of this behavior, so let's create a quick action filter called BypassAntiForgeryToken: [AttributeUsage(AttributeTargets.Method, AllowMultiple=false)] public class BypassAntiForgeryTokenAttribute : ActionFilterAttribute { } Now we are ready to implement the main action filter which will force anti forgery validation on all post actions within any class it is defined on: [AttributeUsage(AttributeTargets.Class, AllowMultiple = false)] public class UseAntiForgeryTokenOnPostByDefault : ActionFilterAttribute { public override void OnActionExecuting(ActionExecutingContext filterContext) { if (ShouldValidateAntiForgeryTokenManually(filterContext)) { var authorizationContext = new AuthorizationContext(filterContext.Controller.ControllerContext);   //Use the authorization of the anti forgery token, //which can't be inhereted from because it is sealed new ValidateAntiForgeryTokenAttribute().OnAuthorization(authorizationContext); }   base.OnActionExecuting(filterContext); }   /// <summary> /// We should validate the anti forgery token manually if the following criteria are met: /// 1. The http method must be POST /// 2. There is not an existing [ValidateAntiForgeryToken] attribute on the action /// 3. There is no [BypassAntiForgeryToken] attribute on the action /// </summary> private static bool ShouldValidateAntiForgeryTokenManually(ActionExecutingContext filterContext) { var httpMethod = filterContext.HttpContext.Request.HttpMethod;   //1. The http method must be POST if (httpMethod != "POST") return false;   // 2. There is not an existing anti forgery token attribute on the action var antiForgeryAttributes = filterContext.ActionDescriptor.GetCustomAttributes(typeof(ValidateAntiForgeryTokenAttribute), false);   if (antiForgeryAttributes.Length > 0) return false;   // 3. There is no [BypassAntiForgeryToken] attribute on the action var ignoreAntiForgeryAttributes = filterContext.ActionDescriptor.GetCustomAttributes(typeof(BypassAntiForgeryTokenAttribute), false);   if (ignoreAntiForgeryAttributes.Length > 0) return false;   return true; } } The code above is pretty straight forward -- first we check to make sure this is a POST request, then we make sure there aren't any overriding *AntiForgeryTokenAttributes on the action being executed. If we have a candidate then we call the ValidateAntiForgeryTokenAttribute class directly and execute OnAuthorization() on the current authorization context. Now on our base controller, you could use this new attribute to start protecting your site from CSRF vulnerabilities. [UseAntiForgeryTokenOnPostByDefault] public class ApplicationController : System.Web.Mvc.Controller { }   //Then for all of your controllers public class HomeController : ApplicationController {} What we accomplished If your base controller has the new default anti-forgery token attribute on it, when you don't use <%= Html.AntiForgeryToken() %> in a form (or of course when an attacker doesn't supply one), the POST action will throw the descriptive error message "A required anti-forgery token was not supplied or was invalid". Attack foiled! In summary, I think having an anti-CSRF policy by default is an effective way to protect your websites, and it turns out it is pretty easy to accomplish as well. Enjoy!

  Read the article

• Kaiden and the Arachnoid Cyst

  - by Martin Hinshelwood

  Some of you may remember when my son Kaiden was born I posted pictures of him and his sister. Kaiden is now 15 months old and is progressing perfectly in every area except that and we had been worried that he was not walking yet. We were only really concerned as his sister was walking at 8 months. Figure: Kai as his usual self   Jadie and I were concerned over that and that he had a rather large head (noggin) so we talked to various GP’s and our health visitor who immediately dismissed our concerns every time. That was until about two months ago when we happened to get a GP whose daughter had Hyper Mobility and she recognised the symptoms immediately. We were referred to the Southbank clinic who were lovely and the paediatrician confirmed that he had Hyper Mobility after testing all of his faculties. This just means that his joints are overly mobile and would need a little physiotherapy to help him out. At the end the paediatrician remarked offhand that he has a rather large head and wanted to measure it. Sure enough he was a good margin above the highest percentile mark for his height and weight. The paediatrician showed the measurements to a paediatric consultant who, as a precautionary measure, referred us for an MRI at Yorkhill Children's hospital. Now, Yorkhill has always been fantastic to us, and this was no exception. You know we have NEVER had a correct diagnosis for the kids (with the exception of the above) from a GP and indeed twice have been proscribed incorrect medication that made the kids sicker! We now always go strait to Yorkhill to save them having to fix GP mistakes as well. Monday 24th May, 7pm The scan went fantastically, with Kaiden sleeping in the MRI machine for all but 5 minutes at the end where he waited patiently for it to finish. We were not expecting anything to be wrong as this was just a precautionary scan to make sure that nothing in his head was affecting his gross motor skills. After the scan we were told to expect a call towards the end of the week… Tuesday 25th May, 12pm The very next day we got a call from Southbank who said that they has found an Arachnoid Cyst and could we come in the next day to see a Consultant and that Kai would need an operation. Wednesday 26th May, 12:30pm We went into the Southbank clinic and spoke to the paediatric consultant who assured us that it was operable but that it was taking up considerable space in Kai’s head. Cerebrospinal fluid is building up as a cyst is blocking the channels it uses to drain. Thankfully they told us that prospects were good and that Kai would expect to make a full recovery before showing us the MRI pictures. Figure: Normal brain MRI cross section. This normal scan shows the spaces in the middle of the brain that contain and produce the Cerebrospinal fluid. Figure: Normal Cerebrospinal Flow This fluid is needed by the brain but is drained in the middle down the spinal column. Figure: Kai’s cyst blocking the four channels. I do not think that I need to explain the difference between the healthy picture and Kai’s picture. However you can see in this first picture the faint outline of the cyst in the middle that is blocking the four channels from draining. After seeing the scans a Neurosurgeon has decided that he is not acute, but needs an operation to unblock the flow. Figure: OMFG! You can see in the second picture the effect of the build up of fluid. If I was not horrified by the first picture I was seriously horrified by this one. What next? Kai is not presenting the symptoms of vomiting or listlessness that would show an immediate problem and as such we will get an appointment to see the Paediatric Neurosurgeon at the Southern General hospital in about 4 weeks. This timescale is based on the Neurosurgeon seeing the scans. After that Kai will need an operation to release the pressure and either remove the cyst completely or put in a permanent shunt (tube from brain to stomach) to bypass the blockage. We have updated his notes for the referral with additional recent information on top of the scan that the consultant things will help improve the timescales, but that is just a guess.   All we can do now is wait and see, and be watchful for tell tail signs of listlessness, eye problems and vomiting that would signify a worsening of his condition.   Technorati Tags: Personal

  Read the article

• Connecting to DB2 from SSIS

  - by Christopher House

  The project I'm currently working on involves moving various pieces of data from a legacy DB2 environment to some SQL Server and flat file locations.  Most of the data flows are real time, so they were a natural fit for the client's MQSeries on their iSeries servers and BizTalk to handle the messaging.  Some of the data flows, however, are daily batch type transmissions.  For the daily batch transmissions, it was decided that we'd use SSIS to pull the data direct from DB2 to either a SQL Server or flat file.  I'm not at all an SSIS guy, I've done a bit here and there, but mainly for situations were we needed to move data from a dev environment to QA, mostly informal stuff like that.  And, as much as I'm not an SSIS guy, I'm even less a DB2/iSeries guy.  Prior to this engagement, my knowledge of DB2 was limited to the fact that it's an IBM product and that it was probably a DBMS flatform (that's what the DB in DB2 means, right?).   One of my first goals when I came onto this project was to develop of POC SSIS package to pull some data from DB2 and dump it to a flat file.  It sounded like a pretty straight forward task.  As always, the devil is in the details.  Configuring the DB2 connection manager took a bit of trial and error.  As such, I thought I'd post my experiences here in hopes that they might save someone the efforts I went through.  That being said, please keep in mind, as I pointed out, I'm not at all a DB2 guy, so my terminology and explanations may not be 100% spot on. Before you get started, you need to figure out how you're going to connect to DB2.  From the research I did, it looks like there are a few options.  IBM has both an OLE DB and .Net data provider which can be found here.  I installed their client access tools and tried to use both the .Net and OLE DB providers but I received an error message from both when attempting to connect to the iSeries that indicated I needed a license for a product called DB2 Connect.  I inquired with one of my client's iSeries resources about a license for this product and it appears they didn't have one, so that meant the IBM drivers were out.  The other option that I found quite a bit of discussion around was Microsoft's OLE DB Provider for DB2.  This driver is part of the feature pack for SQL Server 2008 Enterprise Edition and can be downloaded here. As it turns out, I already had Microsoft's driver installed on my dev VM, which stuck me as odd since I hadn't installed it.  I discovered that the driver is installed with the BizTalk adapter pack for host systems, which was also installed on my VM.  However, it looks like the version used by the adapter pack is newer than the version provided in the SQL Server feature pack.   Once you get the driver installed, create a connection manager in your package just like you normally would and select the Microsoft OLE DB Provider for DB2 from the list of available drivers. After you select the driver, you'll need to enter in your host name, login credentials and initial catalog. A couple of things to note here.  First, the Initial catalog needs to be the same as your host name.  Not sure why that is, but trust me, it just does.  Second, for credentials, in my environment, we're using what the client's iSeries people refer to as "profiles".  I guess this is similar to SQL auth in the SQL Server world.  In other words, they've given me a username and password for connecting to DB, so I've entered it here. Next, click the Data Links button.  On the Data Links screen, enter your package collection on the first tab. Package collection is one of those DB2 concepts I'm still trying to figure out.  From the little bit I've read, packages are used to control SQL compilation and each DB2 connection needs one.  The package collection, I believe, controls where your package is created.  One of the iSeries folks I've been working with told me that I should always use QGPL for my package collection, as QGPL is "general purpose" and doesn't require any additional authority. Next click the ellipsis next to the Network drop-down.  Here you'll want to enter your host name again. Again, not sure why you need to do this, but trust me, my connection wouldn't work until I entered my hostname here. Finally, go to the Advanced tab, select your DBMS platform and check Process binary as character. My environment is DB2 on the iSeries and iSeries is the replacement for AS/400, so I selected DB2/AS400 for my platform.  Process binary as character was necessary to handle some of the DB2 data types.  I had a few columns that showed all their data as "System.Byte[]".  Checking Process binary as character resolved this. At this point, you should be good to go.  You can go back to the Connection tab on the Data Links dialog to perform a couple of tests to validate your configuration.  The Test Connection button is obvious, this just verifies you can connect to the host using the configuration data you've entered.  The Packages button will attempt to connect to the host and create the packages required to execute queries. This isn't meant to be a comprehensive look SSIS and DB2, these are just some of the notes I've come up with since I've started working with DB2 and SSIS.  I'm sure as I continue developing my packages, I'll find more quirks and will post them here.

  Read the article

• Create a Persistent Bootable Ubuntu USB Flash Drive

  - by Trevor Bekolay

  Don’t feel like reinstalling an antivirus program every time you boot up your Ubuntu flash drive? We’ll show you how to create a bootable Ubuntu flash drive that will remember your settings, installed programs, and more! Previously, we showed you how to create a bootable Ubuntu flash drive that would reset to its initial state every time you booted it up. This is great if you’re worried about messing something up, and want to start fresh every time you start tinkering with Ubuntu. However, if you’re using the Ubuntu flash drive to diagnose and solve problems with your PC, you might find that a lot of problems require guess-and-test cycles. It would be great if the settings you change in Ubuntu and the programs you install stay installed the next time you boot it up. Fortunately, Universal USB Installer, a great little program from Pen Drive Linux, can do just that! Note: You will need a USB drive at least 2 GB large. Make sure you back up any files on the flash drive because this process will format the drive, removing any files currently on it. Once Ubuntu has been installed on the flash drive, you can move those files back if there is enough space. Put Ubuntu on your flash drive Universal-USB-Installer.exe does not need to be installed, so just double click on it to run it wherever you downloaded it. Click Yes if you get a UAC prompt, and you will be greeted with this window. Click I Agree. In the drop-down box on the next screen, select Ubuntu 9.10 Desktop i386. Don’t worry if you normally use 64-bit operating systems – the 32-bit version of Ubuntu 9.10 will still work fine. Some useful tools do not have 64-bit versions, so unless you’re planning on switching to Ubuntu permanently, the 32-bit version will work best. If you don’t have a copy of the Ubuntu 9.10 CD downloaded, then click on the checkbox to Download the ISO. You’ll be prompted to launch a web browser; click Yes. The download should start immediately. When it’s finished, return the the Universal USB Installer and click on Browse to navigate to the ISO file you just downloaded. Click OK and the text field will be populated with the path to the ISO file. Select the drive letter that corresponds to the flash drive that you would like to use from the dropdown box. If you’ve backed up the files on this drive, we recommend checking the box to format the drive. Finally, you have to choose how much space you would like to set aside for the settings and programs that will be stored on the flash drive. Considering that Ubuntu itself only takes up around 700 MB, 1 GB should be plenty, but we’re choosing 2 GB in this example because we have lots of space on this USB drive. Click on the Create button and then make yourself a sandwich – it will take some time to install no matter how fast your PC is. Eventually it will finish. Click Close. Now you have a flash drive that will boot into a fully capable Ubuntu installation, and any changes you make will persist the next time you boot it up! Boot into Ubuntu If you’re not sure how to set your computer to boot using the USB drive, then check out the How to Boot Into Ubuntu section of our previous article on creating bootable USB drives, or refer to your motherboard’s manual. Once your computer is set to boot using the USB drive, you’ll be greeted with splash screen with some options. Press Enter to boot into Ubuntu. The first time you do this, it may take some time to boot up. Fortunately, we’ve found that the process speeds up on subsequent boots. You’ll be greeted with the Ubuntu desktop. Now, if you change settings like the desktop resolution, or install a program, those changes will be permanently stored on the USB drive! We installed avast! Antivirus, and on the next boot, found that it was still in the Accessories menu where we left it. Conclusion We think that a bootable Ubuntu USB flash drive is a great tool to have around in case your PC has problems booting otherwise. By having the changes you make persist, you can customize your Ubuntu installation to be the ultimate computer repair toolkit! Download Universal USB Installer from Pen Drive Linux Similar Articles Productive Geek Tips Create a Bootable Ubuntu USB Flash Drive the Easy WayCreate a Bootable Ubuntu 9.10 USB Flash DriveReset Your Ubuntu Password Easily from the Live CDHow-To Geek on Lifehacker: Control Your Computer with Shortcuts & Speed Up Vista SetupHow To Setup a USB Flash Drive to Install Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Test Drive Windows 7 Online Download Wallpapers From National Geographic Site Spyware Blaster v4.3 Yes, it’s Patch Tuesday Generate Stunning Tag Clouds With Tagxedo Install, Remove and HIDE Fonts in Windows 7

  Read the article

• SQLAuthority News – Meeting with Allen Bailochan Tuladhar – An Unlimited Experience

  - by pinaldave

  Allen  Tuladhar I recently came back from my 9-day trip in Nepal and I must say that this is one of the best trips I had in my lifetime. Allen Bailochan Tuladhar is a wonderful person and an extreme enthusiast for Microsoft Technology. Allen is the Chief Executive Officer of Unlimited Technologies Pvt Ltd., Country Manager of Microsoft MDP Nepal, the Member Secretary of Nepali Language in Information Technology, and member of the Steering Committee of the Government of Nepal. He is the person who keeps the Nepal’s Tech Community constantly motivating and taking it to the next level. I have met Allen for many times before, but this was the first time I was with him in Kathmandu, Nepal. I was very impressed with the amount of the work he does in the community. During my 9 days of stay, every single day was a new lesson for me. I was amazed and overwhelmed with the many things he does every single day. Not only he does he work closely with Government of Nepal ministry, but he is also the most known person in the Student Community. His expertise in the technical subject matter is not limited to one technology; rather, I have seen him actively engaging himself in  discussions of various tech topics. Allen presending at TechMela Kathmandu, Nepal Allen is currently active in working out to localize Windows and Office and incorporate it using the Nepali language. I was able to witness and experience how the localization works, as well as the procedure on how to do such. If you know the whole localization process, you must have realized how big and daunting of a process it is. I was glad that I became a part of it. Prominent Personality of Nepal on Panel Discussion Another great opportunity I had when I was at Allen’s office is that I have learned how the radio technology talk show works. Nepali Radio station has the weekly program in their local language, in which MS technology is discussed and industry leaders are invited to talk about their experience with the technology. I found the program so interesting because it has so much variety in terms of technology subjects. Well, my understanding of Nepali language is limited but I did understand quite a bit. Ravi, Nutan, Pinal, Gandip I got the chance to meet lots of Database Professionals as well. People in Nepal are very polite even though they are very strong in their technology fundamentals. I had in-depth discussion regarding High Availability scenarios, as well Query Tuning. Database professionals from the leading financial sectors of Nepal wanted me to visit their Data Center and help them out with a few advances. In no time, Allen organized a visit for me. He sent me a Nepali-speaking expert from his own organization to accompany me in overcoming any difficulties while I was on my way helping this financial district. Pinal (SQLAuthority) and Deependra (Unlimited) When I was going to Nepal, I was really not sure if I would be able to stay busy for 9 days straight in Community-related activity. However, on the 9th day I realize that I can still stay here for more than 9 days because in every single day, I feel enthusiastic enough to do something new. Allen Bailochan Tuladhar Even though I was working  very hard every day, I hardly had the chance to work with and talk to him one-on-one for the first few days. One of the evenings, Allen invited me to his home and we discussed about his future ideas. I was really surprised to see how much a man can do for his technical community and for his country. When I asked Allen’s wife and daughter if they ever think it’s getting too much with regards to Allen putting tough efforts to the community, their answer was something I did not expect. I found out that Allen’s wife manages all the back office and logistics of the community events and his daughter manages the websites. I felt that they do not have any complain,  and instead, their whole family is in this activity as deeply as it can get, which I thought is a very good thing. Pinal and Allen I want to end this post with an interesting story that happened during our lunch hour at one of the Nepali restaurants. While we were having our lunch and having some chitchat, Allen suddenly stood up and called several people walking along the pavement. He introduced them all to me as Microsoft Student Partners. He asked all of them to order their favorite dish and called the waiter to inform that he will pick up their tab. Figuring out the question written on my face, he just said one sentence: “They are all future technology professionals who are going to make all of us proud.” I guess I have a lot of things to learn. Hats off to Allen! Pinal and Allen at Microsoft MDP Unlimited Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, T SQL, Technology

  Read the article

• SQL SERVER – Beginning of SQL Server Architecture – Terminology – Guest Post

  - by pinaldave

  SQL Server Architecture is a very deep subject. Covering it in a single post is an almost impossible task. However, this subject is very popular topic among beginners and advanced users.  I have requested my friend Anil Kumar who is expert in SQL Domain to help me write  a simple post about Beginning SQL Server Architecture. As stated earlier this subject is very deep subject and in this first article series he has covered basic terminologies. In future article he will explore the subject further down. Anil Kumar Yadav is Trainer, SQL Domain, Koenig Solutions. Koenig is a premier IT training firm that provides several IT certifications, such as Oracle 11g, Server+, RHCA, SQL Server Training, Prince2 Foundation etc. In this Article we will discuss about MS SQL Server architecture. The major components of SQL Server are: Relational Engine Storage Engine SQL OS Now we will discuss and understand each one of them. 1) Relational Engine: Also called as the query processor, Relational Engine includes the components of SQL Server that determine what your query exactly needs to do and the best way to do it. It manages the execution of queries as it requests data from the storage engine and processes the results returned. Different Tasks of Relational Engine: Query Processing Memory Management Thread and Task Management Buffer Management Distributed Query Processing 2) Storage Engine: Storage Engine is responsible for storage and retrieval of the data on to the storage system (Disk, SAN etc.). to understand more, let’s focus on the following diagram. When we talk about any database in SQL server, there are 2 types of files that are created at the disk level – Data file and Log file. Data file physically stores the data in data pages. Log files that are also known as write ahead logs, are used for storing transactions performed on the database. Let’s understand data file and log file in more details: Data File: Data File stores data in the form of Data Page (8KB) and these data pages are logically organized in extents. Extents: Extents are logical units in the database. They are a combination of 8 data pages i.e. 64 KB forms an extent. Extents can be of two types, Mixed and Uniform. Mixed extents hold different types of pages like index, System, Object data etc. On the other hand, Uniform extents are dedicated to only one type. Pages: As we should know what type of data pages can be stored in SQL Server, below mentioned are some of them: Data Page: It holds the data entered by the user but not the data which is of type text, ntext, nvarchar(max), varchar(max), varbinary(max), image and xml data. Index: It stores the index entries. Text/Image: It stores LOB ( Large Object data) like text, ntext, varchar(max), nvarchar(max),  varbinary(max), image and xml data. GAM & SGAM (Global Allocation Map & Shared Global Allocation Map): They are used for saving information related to the allocation of extents. PFS (Page Free Space): Information related to page allocation and unused space available on pages. IAM (Index Allocation Map): Information pertaining to extents that are used by a table or index per allocation unit. BCM (Bulk Changed Map): Keeps information about the extents changed in a Bulk Operation. DCM (Differential Change Map): This is the information of extents that have modified since the last BACKUP DATABASE statement as per allocation unit. Log File: It also known as write ahead log. It stores modification to the database (DML and DDL). Sufficient information is logged to be able to: Roll back transactions if requested Recover the database in case of failure Write Ahead Logging is used to create log entries Transaction logs are written in chronological order in a circular way Truncation policy for logs is based on the recovery model SQL OS: This lies between the host machine (Windows OS) and SQL Server. All the activities performed on database engine are taken care of by SQL OS. It is a highly configurable operating system with powerful API (application programming interface), enabling automatic locality and advanced parallelism. SQL OS provides various operating system services, such as memory management deals with buffer pool, log buffer and deadlock detection using the blocking and locking structure. Other services include exception handling, hosting for external components like Common Language Runtime, CLR etc. I guess this brief article gives you an idea about the various terminologies used related to SQL Server Architecture. In future articles we will explore them further. Guest Author  The author of the article is Anil Kumar Yadav is Trainer, SQL Domain, Koenig Solutions. Koenig is a premier IT training firm that provides several IT certifications, such as Oracle 11g, Server+, RHCA, SQL Server Training, Prince2 Foundation etc. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, SQL Training, T SQL, Technology

  Read the article

• WP7 “Phantom Data” Source Possibly Revealed?

  - by Bil Simser

  Recently there’s been rumours floating around regarding “phantom” Windows Phone 7 data being magically sent and received on the latest WP7 phones. The news has mostly been floating around twitter so I didn’t pay it much attention. The BBC Technology News picked it up so I thought I would look more into it myself seeing that we have WP7 phones and maybe there was some truth to all this (and more importantly what was the cause). Full disclosure. I don’t have a lot of data points around this. This is from looking at a few phone logs, changing the configuration and looking back again after the change. I haven’t done a clean baseline test nor have I done testing with hundreds of phones. I leave the experience up to the reader to decide. So I went spelunking into the phone logs to see what was up. Most providers will show you data usage, at least on a daily basis. I lucked out with the provider and plan in that they provide hourly breakdowns. Here’s a snapshot from my usage throughout one night. Timestamp Data Usage 12:38:30 AM 2098 Kilobytes 1:30:30 AM 2 Kilobytes 2:38:30 AM 7118 Kilobytes 3:38:30 AM 6622 Kilobytes 4:38:30 AM 76 Kilobytes 5:38:30 AM 29 Kilobytes 6:38:30 AM 19 Kilobytes 7:38:30 AM 20 Kilobytes So a few observations from this data: Data seems to be collected on a regular basis. Looking at some other people phone logs, the times vary but it’s always hourly. There’s not a tremendous amount of data here (about 16 megabytes) but it seems like a lot for 7 hours The phone was connected to my home Wifi during this period Nothing was running and the phone was in a locked state Like I said, not a lot of data but it adds up. 16MB for 7 hours = about 50MB in a 24 hour period. That’s just plain old data being collected (somewhere, somehow) and not actual usage (Marketplace, Email, Browsing, etc.). Besides, when connected to a WiFi network you shouldn’t be charged data usage from your phone company (in theory, YMMV). After reviewing the logs I made a theory that the only thing that could possibly be sending data is the Feedback feature. With no other apps running under lock, what else could it be? In Windows 7 under your Settings the last option is Feedback. This sends feedback to Microsoft to “help improve Windows Phone”. On this page you have three options: Send feedback and use my cellular data connection Send feedback and (presumably) use my WiFi connection Don’t send feedback Knowing what I know about Microsoft, they do use the feedback data. For example some of the placement and inclusion of features in Office 2007 was based on that Feedback data that Office sends (assuming you had opted in). However in the Privacy Statement (it’s long but a good read at least once in your life), the Phone manual, and every other source I could look at there is no information about how much data it’s planning to send, just that it’s sending some data and that “some data charges with your carrier may apply”. Looking back at the logs, I have to wonder. 6MB at 3:30 and *then* 7MB the next hour. That’s a lot of information. And it adds up. 50MB in a 24 hour period X 30 days puts most people over a normal 1GB plan. And frankly why am I paying for a data plan only to have 80% of it chewed up by Microsoft, with no real benefit to me. If they included porn in the 50mb daily transfer I’d be okay with this, but I don’t see any new movies on my phone. So I turned it off. Set Feedback to disabled and wait. I waited. And waited. And generally didn’t use the phone if I could. The next day I went back to look at the data usage logs from the time period after turning the feedback mechanism off. Here are the results. Timestamp Data Usage 1:19:48 PM 0 Kilobytes 2:19:48 PM 0 Kilobytes 3:19:48 PM 0 Kilobytes 4:19:48 PM 678 Kilobytes (took a phone call) 5:19:48 PM 82 Kilobytes 6:19:48 PM 88 Kilobytes 7:20:30 PM 86 Kilobytes (guess they changed their reporting time) 8:20:30 PM 86 Kilobytes 9:20:30 PM 66 Kilobytes 10:20:30 PM 67 Kilobytes 11:20:30 PM 49 Kilobytes 12:20:30 AM 32 Kilobytes 1:20:30 AM 38 Kilobytes 2:20:31 AM 18 Kilobytes 3:20:31 AM 27 Kilobytes 4:20:31 AM 86 Kilobytes 5:20:31 AM 53 Kilobytes 6:20:31 AM 22 Kilobytes 7:22:15 AM 30 Kilobytes (another reporting time change) 8:22:15 AM 29 Kilobytes 9:22:15 AM 74 Kilobytes 10:22:15 AM 154 Kilobytes (phone call) 11:22:15 AM 12 Kilobytes 12:13:27 PM 49 Kilobytes 1:13:27 PM 197 Kilobytes (phone call) Quite a *drastic* change from what Feedback was turned on. I mean for a 24 hour period (sans 3 phone calls) I consumed about 1MB. Still quite a bit of transfer going on but at least it amounts to 30MB per month, not 30MB per day! Like I said this observation is neither scientific or conclusive. You decide what to do but frankly until Microsoft makes this data transfer exempt from your data plan (like that will happen) I would just turn Feedback off. YMMV.

  Read the article

• SanjayP&rsquo;s venture after Microsoft involves no Microsoft

  - by eddraper

  When I was at Microsoft, I always found Sanjay Parthasarathy to be a bright and passionate leader.  While he was a bit disconnected at times with what was really going on out in the trenches, I always thought he was true believer in what we in Developer Platform and Evangelism (DPE) were doing.  He got it.  He had started DPE and kicked a lot of doors down up in Redmond to make it happen.  Back in the early 2000s, battles over platform choices at large customers was trench warfare… bayonets and hand grenades at the P-Code level.  This model was not at all suited to Microsoft’s org structure at the time.  While there were plenty of people fully able to have competitive conversations around Windows Server, or AD, or Exchange, or the desktop, there weren’t many that could have deep technical conversations around Java vs .NET and the platform “stack” as a cohesive, unified unit of value.  This task fell to DPE. Sanjay ended up leaving Microsoft a number of months before me in 2009 and I remember thinking these exact words: “holy shit, SanjayP left Microsoft.”  When SanjayP left DPE years before that,  Sheila Gulati had stepped into his shoes and I thought we where starting to miss a beat.  Sheila had built an amazing business at Microsoft India, but I don’t recall being inspired by her as a leader.  SanjayP’s talks felt like the opening scene of “Patton” with George C. Scott pacing in front of the American flag.  Sheila was a voice on a con-call.  When she moved on in 2007, Walid Abu-Hadba was given the reigns.  Personally, I don’t ever recall even seeing his face.  I think I might recall hearing his voice on some con-calls, but for all intents and purposes he was invisible to me.  Perhaps this was the beginning of my carelessness around seeking “visibility.” Fast forward to Build 2011.  First off, we have no PDC – we have Build.  Microsoft had made an 11 year investment by this time in building an organization to make its technology relevant to developers.  One would think such an org would be in the driver’s seat of such an event, but we see Windows product group people on the podiums.  Watching, I could see the messaging unfold… but no story.  It was like the old days.  Demos and PowerPoints by team members building the tech, and in many cases VPs.  The ensuing confusion is almost legendary now.  Windows 8 was, and is, a pretty big deal… but who is telling the story – not just features and benefits, but the story around how it all fits together. Having been out of Microsoft for two years now, and looking in, I can only conclude that the “DPE of old” has at best been emasculated, and at worst been completely marginalized by internal politics, or perhaps the eternal march of the corporate entropy generator that resides at all large companies.  I don’t think this is a good thing for anyone. And now, back to Sanjay who is the father of Microsoft DPE… I noticed that he has moved back to India and is doing start-up work.  His current company Indix looks to be doing some interesting things with “big data” and here’s their stack: Nary a trace of anything Microsoft.  What could account for this?  I wonder….  Better availability of labor and expertise in India for this stack?  Donno, but even in India, leet R and Hadoop skills have to be hard to find. Technical superiority?  This, I sincerely doubt. This stack, with SanjayP’s name as CEO leaves me with an unsettling feeling.  If he did believe, he no longer does.  One doesn’t place bets with real money on things they don’t believe in.  Perhaps he never did believe, and was a corporate creature seeking to find a niche for himself after which he manipulated me and others.  Or perhaps… anger… be it passive aggression or an outright “in your face F*** you” to his former masters. I guess in the end, only he knows the true reason… But I have my theory...

  Read the article

• Performance considerations for common SQL queries

  - by Jim Giercyk

  Originally posted on: http://geekswithblogs.net/NibblesAndBits/archive/2013/10/16/performance-considerations-for-common-sql-queries.aspxSQL offers many different methods to produce the same results.  There is a never-ending debate between SQL developers as to the “best way” or the “most efficient way” to render a result set.  Sometimes these disputes even come to blows….well, I am a lover, not a fighter, so I decided to collect some data that will prove which way is the best and most efficient.  For the queries below, I downloaded the test database from SQLSkills:  http://www.sqlskills.com/sql-server-resources/sql-server-demos/.  There isn’t a lot of data, but enough to prove my point: dbo.member has 10,000 records, and dbo.payment has 15,554.  Our result set contains 6,706 records. The following queries produce an identical result set; the result set contains aggregate payment information for each member who has made more than 1 payment from the dbo.payment table and the first and last name of the member from the dbo.member table.   /*************/ /* Sub Query  */ /*************/ SELECT  a.[Member Number] ,         m.lastname ,         m.firstname ,         a.[Number Of Payments] ,         a.[Average Payment] ,         a.[Total Paid] FROM    ( SELECT    member_no 'Member Number' ,                     AVG(payment_amt) 'Average Payment' ,                     SUM(payment_amt) 'Total Paid' ,                     COUNT(Payment_No) 'Number Of Payments'           FROM      dbo.payment           GROUP BY  member_no           HAVING    COUNT(Payment_No) > 1         ) a         JOIN dbo.member m ON a.[Member Number] = m.member_no         /***************/ /* Cross Apply  */ /***************/ SELECT  ca.[Member Number] ,         m.lastname ,         m.firstname ,         ca.[Number Of Payments] ,         ca.[Average Payment] ,         ca.[Total Paid] FROM    dbo.member m         CROSS APPLY ( SELECT    member_no 'Member Number' ,                                 AVG(payment_amt) 'Average Payment' ,                                 SUM(payment_amt) 'Total Paid' ,                                 COUNT(Payment_No) 'Number Of Payments'                       FROM      dbo.payment                       WHERE     member_no = m.member_no                       GROUP BY  member_no                       HAVING    COUNT(Payment_No) > 1                     ) ca /********/                    /* CTEs  */ /********/ ; WITH    Payments           AS ( SELECT   member_no 'Member Number' ,                         AVG(payment_amt) 'Average Payment' ,                         SUM(payment_amt) 'Total Paid' ,                         COUNT(Payment_No) 'Number Of Payments'                FROM     dbo.payment                GROUP BY member_no                HAVING   COUNT(Payment_No) > 1              ),         MemberInfo           AS ( SELECT   p.[Member Number] ,                         m.lastname ,                         m.firstname ,                         p.[Number Of Payments] ,                         p.[Average Payment] ,                         p.[Total Paid]                FROM     dbo.member m                         JOIN Payments p ON m.member_no = p.[Member Number]              )     SELECT  *     FROM    MemberInfo /************************/ /* SELECT with Grouping   */ /************************/ SELECT  p.member_no 'Member Number' ,         m.lastname ,         m.firstname ,         COUNT(Payment_No) 'Number Of Payments' ,         AVG(payment_amt) 'Average Payment' ,         SUM(payment_amt) 'Total Paid' FROM    dbo.payment p         JOIN dbo.member m ON m.member_no = p.member_no GROUP BY p.member_no ,         m.lastname ,         m.firstname HAVING  COUNT(Payment_No) > 1   We can see what is going on in SQL’s brain by looking at the execution plan.  The Execution Plan will demonstrate which steps and in what order SQL executes those steps, and what percentage of batch time each query takes.  SO….if I execute all 4 of these queries in a single batch, I will get an idea of the relative time SQL takes to execute them, and how it renders the Execution Plan.  We can settle this once and for all.  Here is what SQL did with these queries:   Not only did the queries take the same amount of time to execute, SQL generated the same Execution Plan for each of them.  Everybody is right…..I guess we can all finally go to lunch together!  But wait a second, I may not be a fighter, but I AM an instigator.     Let’s see how a table variable stacks up.  Here is the code I executed: /********************/ /*  Table Variable  */ /********************/ DECLARE @AggregateTable TABLE     (       member_no INT ,       AveragePayment MONEY ,       TotalPaid MONEY ,       NumberOfPayments MONEY     ) INSERT  @AggregateTable         SELECT  member_no 'Member Number' ,                 AVG(payment_amt) 'Average Payment' ,                 SUM(payment_amt) 'Total Paid' ,                 COUNT(Payment_No) 'Number Of Payments'         FROM    dbo.payment         GROUP BY member_no         HAVING  COUNT(Payment_No) > 1   SELECT  at.member_no 'Member Number' ,         m.lastname ,         m.firstname ,         at.NumberOfPayments 'Number Of Payments' ,         at.AveragePayment 'Average Payment' ,         at.TotalPaid 'Total Paid' FROM    @AggregateTable at         JOIN dbo.member m ON m.member_no = at.member_no In the interest of keeping things in groupings of 4, I removed the last query from the previous batch and added the table variable query.  Here’s what I got:     Since we first insert into the table variable, then we read from it, the Execution Plan renders 2 steps.  BUT, the combination of the 2 steps is only 22% of the batch.  It is actually faster than the other methods even though it is treated as 2 separate queries in the Execution Plan.  The argument I often hear against Table Variables is that SQL only estimates 1 row for the table size in the Execution Plan.  While this is true, the estimate does not come in to play until you read from the table variable.  In this case, the table variable had 6,706 rows, but it still outperformed the other queries.  People argue that table variables should only be used for hash or lookup tables.  The fact is, you have control of what you put IN to the variable, so as long as you keep it within reason, these results suggest that a table variable is a viable alternative to sub-queries. If anyone does volume testing on this theory, I would be interested in the results.  My suspicion is that there is a breaking point where efficiency goes down the tubes immediately, and it would be interesting to see where the threshold is. Coding SQL is a matter of style.  If you’ve been around since they introduced DB2, you were probably taught a little differently than a recent computer science graduate.  If you have a company standard, I strongly recommend you follow it.    If you do not have a standard, generally speaking, there is no right or wrong answer when talking about the efficiency of these types of queries, and certainly no hard-and-fast rule.  Volume and infrastructure will dictate a lot when it comes to performance, so your results may vary in your environment.  Download the database and try it!

  Read the article

• Windows Phone 7 development: first impressions

  - by DigiMortal

  After hard week in work I got some free time to play with Windows Phone 7 CTP developer tools. Although my first test application is still unfinished I think it is good moment to share my first experiences to you. In this posting I will give you quick overview of Windows Phone 7 developer tools from developer perspective. If you are familiar with Visual Studio 2010 then you will feel comfortable because Windows Phone 7 CTP developer tools base on Visual Studio 2010 Express. Project templates There are five project templates available. Three of them are based on Silverlight and two on XNA Game Studio: Windows Phone Application (Silverlight) Windows Phone List Application (Silverlight) Windows Phone Class Library (Silverlight) Windows Phone Game (XNA Game Studio) Windows Phone Game Library (XNA Game Studio) Currently I am writing to test applications. One of them is based on Windows Phone Application and the other on Windows Phone List Application project template. After creating these projects you see the following views in Visual Studio. Windows Phone Application. Click on image to enlarge. Windows Phone List Application. Click on image to enlarge.  I suggest you to use some of these templates to get started more easily. Windows Phone 7 emulator You can run your Windows Phone 7 applications on Windows Phone 7 emulator that comes with developer tools CTP. If you run your application then emulator is started automatically and you can try out how your application works in phone-like emulator. You can see screenshot of emulator on right. Currently there is opened Windows Phone List Application as it is created by default. Click on image to enlarge it. Emulator is a little bit slow and uncomfortable but it works pretty well. This far I have caused only couple of crashes during my experiments. In these cases emulator works but Visual Studio gets stuck because it cannot communicate with emulator. One important note. Emulator is based on virtual machine although you can see only phone screen and options toolbar. If you want to run emulator you must close all virtual machines running on your machine and run Visual Studio 2010 as administrator. Once you run emulator you can keep it open because you can stop your application in Visual Studio, modify, compile and re-deploy it without restarting emulator. Designing user interfaces You can design user interface of your application in Visual Studio. When you open XAML-files it is displayed in window with two panels. Left panel shows you device screen and works as visual design environment while right panel shows you XAML mark-up and let’s you modify XML if you need it. As it is one of my very first Silverlight applications I felt more comfortable with XAML editor because property names in property boxes of visual designer confused me a little bit. Designer panel is not very good because it is visually hard to follow. It has black background that makes dark borders of controls very hard to see. If you have monitor with very high contrast then it is may be not a real problem. I have usual monitor and I have problem. :) Putting controls on design surface, dragging and resizing them is also pretty painful. Some controls are drawn correctly but for some controls you have to set width and height in XML so they can be resized. After some practicing it is not so annoying anymore. On the right you can see toolbox with some controllers. This is all you get out of the box. But it is sufficient to get started. After getting some experiences you can create your own controls or use existing ones from other vendors or developers. If it is your first time to do stuff with Silverlight then keep Google open – you need it hard. After getting over the first shock you get the point very quickly and start developing at normal speed. :) Writing source code Writing source code is the most familiar part of this action. Good old Visual Studio code editor with all nice features it has. But here you get also some surprises: The anatomy of Silverlight controls is a little bit different than the one of user controls in web and forms projects. Windows Phone 7 doesn’t run on full version of Windows (I bet it is some version of Windows CE or something like this) then there is less system classes you can use. Some familiar classes have less methods that in full version of .NET Framework and in these cases you have to write all the code by yourself or find libraries or source code from somewhere. These problems are really not so much problems than limitations and you get easily over them. Conclusion Windows Phone 7 CTP developer tools help you do a lot of things on Windows Phone 7. Although I expected better performance from tools I think that current performance is not a problem. This far my first test project is going very well and Google has answer for almost every question. Windows Phone 7 is mobile device and therefore it has less hardware resources than desktop computers. This is why toolset is so limited. The more you need memory the more slower is device and as you may guess it needs the more battery. If you are writing apps for mobile devices then make your best to get your application use as few resources as possible and act as fast as possible.

  Read the article

• Good ol fashioned debugging

  - by Tim Dexter

  I have been helping out one of our new customers over the last day or two and I have even managed to get to the bottom of their problem FTW! They use BIEE and BIP and wanted to mount a BIP report in a dashboard page, so far so good, BIP does that! Just follow the instructions in the BIEE user guide. The wrinkle is that they want to enter some fixed instruction strings into the dashboard prompts to help the user. These are added as fixed values to the prompt as the default values so they appear first. Once the user makes a selection, the default strings disappear. Its a fair requirement but the BIP report chokes Now, the BIP report had been setup with the Autorun checkbox, unchecked. I expected the BIP report to wait for the Go button to be hit but it was trying to run immediately and failing. That was the first issue. You can not stop the BIP report from trying to run in a dashboard. Even if the Autorun is turned off, it seems that dashboard still makes the request to BIP to run the report. Rather than BIP refusing because its waiting for input it goes ahead anyway, I guess the mechanism does not check the autorun flag when the request is coming from the dashboard. It appears that between BIEE and BIP, they collectively ignore the autorun flag. A bug? might be, at least an enhancement request. With that in mind, how could we get BIP to not at least not fail? This fact was stumping me on the parameter error, if the autorun flag was being respected then why was BIP complaining about the parameter values it should not even be doing anything until the Go button is clicked. I now knew that the autorun flag was being ignored, it was a simple case of putting BIP into debug mode. I use the OC4J server on my laptop so debug msgs are routed through the dos box used to start the OC4J container. When I changed a value on the dashboard prompt I spotted some debug text rushing by that subsequently disappeared from the log once the operation was complete. Another bug? I needed to catch that text as it went by, using the print screen function with some software to grab multiple screens as the log appeared and then disappeared. The upshot is that when you change the dashboard prompt value, BIP validates the value against its own LOVs, if its not in the list then it throws the error. Because 'Fill this first' and 'Fill this second' ie fixed strings from the dashboard prompts, are not in the LOV lists and because the report is auto running as soon as the dashboard page is brought up, the report complains about invalid parameters. To get around this, I needed to get the strings into the LOVs. Easily done with a UNION clause: select 'Fill this first' from SH.Products Products UNION select Products."Prod Category" as "Prod Category" from SH.Products Products Now when BIP wants to validate the prompt value, the LOV query fires and finds the fixed string -> No Error. No data, but definitely no errors :0) If users do run with the fixed values, you can capture that in the template. If there is no data in the report, either the fixed values were used or the parameters selected resulted in no rows. You can capture this in the template and display something like. 'Either your parameter values resulted in no data or you have not changed the default values' Thats the upside, the downside is that if your users run the report in the BP UI they re going to see the fixed strings. You could alleviate that by having BIP display the fixed strings in top of its parameter drop boxes (just set them as the default value for the parameter.) But they will not disappear like they do in the dashboard prompts, see below. If the expected autorun behaviour worked ie wait for the Go button, then we would not have to workaround it but for now, its a pretty good solution. It was an enjoyable hour or so for me, took me back to my developer daze, when we used to race each other for the most number of bug fixes. I used to run a distant 2nd behind 'Bugmeister Chen Hu' but led the chasing pack by a reasonable distance.

  Read the article

• ISO Files to USB &ndash; The Cheap and Easy Way

  - by RonGarlit

  (DISCLAIMER: Yes there are lots of more elegant ISO software beside the free Microsoft one I’m about to show. But free is free and it has been tested and works for me for making advance bootable USB drives. That is another story. Look up Windows 8 Developer Preview for that one on BING.) For those of use that work with new technology all the time we accumulate a lot of ISO files and have to burn them to CD/DVD’s quite often. But we now have machines without burner in the corporate environment. We have personally Netbooks and light wait highly mobile laptops that do not have DVD burner. USB ports are all the rage and now we have USB 3.0 which is way faster than the 2.0 we are used to. Just looking at the technology, space saving and the cost issues alone is a reason to buy these answer to the DVD’s. So what is special about USB 2.0 and USB 3.0? USB 2 has a maximum speed of 480 Mbps... (That is Megabits per SECOND!!) Now look at the storage that we have with USB thumb drives that are now up to 64 GB in size, cell phone and PDAs that have a lots of internal storage built in well above the 16 Gig range. At the MAX USB 2.0 speed of 480 Mbps a full transfer of data in between devices can take a long time. Time is money right. Every back up a iPhone? Don’t get me started. So at least the engineers have been planning ahead with USB 3.0 which offers a maximum transfer speed of 4.8 Gbps... (That is Giga bits per SECOND!!) That speed is almost 10 times faster than USB 2.0 …. We don’t need to do the math on that one do we? But for now I'm thrilled with USB 2.0 and the fact I can get these little 4 Gig USB drives for $4.00 each at Staples on sale. Well that is a no brainer don’t you think. But what can you do with them to replace that DVD. Simply and cheaply put………. THIS! First let’s get an ISO file like the Visual Studio 2010 Ultimate DVD ISO from MSDN to demonstrate with. I develop on several computers so this is a good choice for me. So we downloaded the ISO file and put it in a folder somewhere like this. Next we go download to the Windows 7 USB/DVD Download Tool site and read about the tool. http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool And click this like to get the tool and install it. Once it is installed you go to the Start, Programs menu, Windows 7 USB DVD Download Tool folder. And then click the tool to open it up. As you will see it is a sweet, simple tool that was originally designed to put the ISO for Windows 7 which is designed to be bootable on a USB or DVD for us geeks to play with. It is now being used for the Windows 8 Developer Preview by many developers for that for the same purpose it was built for in the past. But for now we will use it to put a NON Bootable ISO on a USB. Hey it does the job and I’m reusing a left over program. Why buy the fancy one or a free trial and clutter up my machine. We will click the BROWSE button and navigate to where we put our ISO file we want to put on the USB drive. Obviously we are going to click NEXT and continue to select a USB Device (you can guess what the DVD button is for). Next we select the USB that we have plugged into one of our laptops USB ports. Then we click the BEGIN COPYING button and the first thing the program does is format our USB drive. Then it starts copying out files out of the ISO and constructing the USB as if it was a DVD. So now that the files are copying to the drive I’m going to warn you. We will error out here. This program was design for bootable ISO’s of which this one is NOT. No problem because what fails it the writing of the bootable data to the drive that isn’t there. No biggie…. Forget the STARTOVER button is even there and click the dialog’s CLOSE button and exit the program. Now go to Windows Explorer and navigate to the USB Device. You can now access everything and even add stuff to the drive. But for me I want to keep this drive for one purpose and that is to install VS2010 on various machines. So the only stuff I’ll add to this is a folder of notes on things on visual studio that I might want to put on other machines I’m installing VS2010 on to. So that is it. Have a nice day! The Ron

  Read the article

• Trying to keep up with Technology and Blogging

  - by Dave Campbell

  A little bit of everything... The heading above got changed a bunch during writing and I finally settled on that because this has become a 'stream of consciousness' post... or maybe a stream of UNconsciousness :) If you've noticed, my blogging has been a tad slow this fall. There's been a lot going on personally. But then again, I haven't skipped anybody either. Rather than go through ALL the blogs I have aggregated, and take a week to get to the bottom, at some point in the last year, I had moved the lists around so I now have "SilverlightMVPs", "Very Prolific", "WP7", and "Top Checks". This is a total of about 250 of the more prolific bloggers. Those 250 bloggers have kept me very busy up through about //BUILD. Sometimes it would take all week to go through just that list putting out 13 posts per blog per day... but not anymore. This weekend I made it all the way through the BIG list... close to 700 blogs, and if you read my blog, you know I had one medium day (Saturday), and yesterday was very short. Why is this? To be honest, I don't know... is everybody busy re-tooling, or churning waiting for direction? I have a short list of WinRT/Metro/W8 folks... maybe I need to be pointed to more of them... but my old favorites are not pumping out posts as they have in the past. I said before that I am attracted to Metro, and I've already got My first Metro app post out there, and were it not for working with the new site, I'd have had another out last weekend... so definitely look for more from me in that area. New Site? Did I say 'new site' ? oops... didn't mean to do that, but now that the cat is out of the bag, I may as well continue... While at //BUILD, I discussed a re-tooling of SilverlightCream with lots of folks... probably more than wanted to hear about it to be honest! ... it's needed a facelift, and there's stuff on there that never worked right, plus there's a lot of manual effort that goes into a blog post. In an effort to alleviate all the above, Michael Washington and I have been working on the next iteration of SilverlightCream. Not wanting to lose that branding or mess with any saved links, I decided to change from a somewhat funky name to something more professional. I also decided to put my blog on the site, and tie my main announcement twitter feed to the site as well. The way things sit today, there are 3 different names in those locations and it's gotta be confusing for folks just stumbling in. We're going to do a series of posts talking about the site and the new backend processing (hint: Michael Washington is responsible for it, so you can take a guess at the technology), but for now, we'd like some eyes on the front end of the site, and some submittals using it to see if it falls over somewhere that we haven't tried. So... I'm going to give it up... the new site is Windows Dev News. The Twitter feed is @WindowsDevNews, and the blog will be on the site as well at Windows Dev News Blog. I've got the RSS Feed on Feedburner too, so I think all the nuts and bolts are good to go. The submittal and search pages work, as does the blog page. You'll notice we used the MasterPage from SilverlightCream to get started. That will probably change, but it's just the visual... the content is the important part. Other missing things are the tracking and 'Skim' page that we will eventually have up and running. There are some formatting issues with the blog posts but if you hang in there with me, those will be taken care of. If you're a blogger, please submit through the site and let me know if you find any problems. If you're a reader, please add this feed and site. I'll be duplicating the effort for a while but at some point will stop that foolishness. We won't lose the data from SilverlightCream though, so keep using that as a search resource... I have hopes to pull that database over to WindowsDevNews, or link to it in some manner... that part isn't set in jello yet, but it will not be lost. So there it is... let me know what you think, send me your WinRT/Metro/W8 postings along with your Silverlight and WP7 posts... it's not that different, it's just more. Stay in the 'Light

  Read the article

• SQL Saturday #44 Huntington Beach Recap

  What a great day. It was long and tiring, but rewarding in so many ways. On Sunday morning, I was driving home and I decided to take the Pacific Coast Highway from Huntington Beach.  It was a great chance to exhale and just enjoy the sun and smells of the beach (I really love SoCal sometimes). And for future reference for all you speakers, the beach and ocean are only 5 minutes from the SQL Saturday location.  I just could help noticing also the shocking number of high priced cars on the road (4 Bentleys, 3 Ferraris, 1 Aston Martins, 3 Maserati, 1 Rolls Royce, and 2 Lamborghinis).  It made me think about this: Price of all those cars: $ 150,000+.  Impacting the ability of people to learn: Priceless.  We have positively impacted the education, knowledge, capabilities of not only our attendees, but also all of their companies and people they might help as well.  That is just staggering and something to be immensely proud of. To all of my fellow community leaders, I salute you. So lets talk about the event Overall We had over 220 people register for the event and had 180+ people attend the event. I was shooting for the magical 200 number, but I guess it just gives us more motivation to make it even bigger and better next time. We had a few snags along the way, but what event doesnt, but I think everything turned out great. I did not hear any negative comments and heard lots of positive comments along with people asking when the next one is going to be (More on that later). Location- Golden West College We could not have asked for a better partner for the event. Herb Cohen from Golden West College was the wizard behind the curtains. From the beginning, he was our advocate to the GWC Board and was instrumental in getting our event approved. The day off, Herb was a HUGE help getting any and all logistics that we needed taken care of. In the craziness of the early morning registration crush it was a big help knowing that he and Bret Stateham (Blog | Twitter) were taking care of testing projectors in all the rooms. Anything we needed he was there and was even proactive in getting some things that I had not even thought of (i.e. a dumpster for all of our garbage). I cannot thank Herb enough along with other members of the GWC staff including Minnie Higgins of the Career and Technical Education Division office, Jack Taylor, public safety, and Ron Pryor, Tech Services Support. And last, but not least, the Wireless on campus was absolutely FANTASTIC! Some lessons learned Unless you are a glutton for punishment, as I no doubt am, you most certainly want to give yourself more than six weeks to plan the event. I am lucky that I have a very understanding wife and had a wonderful set of co-coordinators helping me out. A big thanks goes out to Phil, Marlon (Blog | Twitter), Nitin (Twitter), Thomas (Blog | Twitter), Bret (Blog | Twitter), Ben, and Laurie. Thankfully, the sponsor and speaker community was hugely supportive and we were able to fill out the entire event with speakers and sponsors. I have to say that there is not a lot that I would change after this years event. There are obviously going to be some things that we can do better or differently next time, but overall I think it was a great event and I was more than happy with the response we received from the community. Sponsors We obviously could not have put together our event without our sponsors. So certainly have to show them some love. Platinum Sponsors Quest Software http://www.quest.com My Space http://www.myspace.com/ Gold Strategy Companion http://www.strategycompanion.com Silver Fusion-IO http://www.fusionio.com Bronze WestClinTech http://westclintech.com Professional Association For SQL Server http://www.sqlpass.org Attunity http://www.attunity.com Sharepoint 360 http://www.sharepoint360.com Some additional Thanks Andy Warren (Blog | Twitter) Always there to answer my question and help out when I had some issues or questions with the website. The amount of work that he and everyone else put into SQL Saturday is very amazing. What a great gift to the community! Einstein Bros. Bagels They were our Breakfast Vendor and arrived perfectly on time with yummy bagels, sweets and most importantly coffee. Luccis Deli (http://www.luccisdeli.com) Luccis was out Lunch Vendor. They were great to work with and the food was excellent. They worked with us to give us a great price. Heard lots of great comments about the lunches. Definitely not your ordinary box lunch. Moving Forward Unfortunately, the work does not end after the event. We have a few things to clear up such as surveys, sponsor stuff, presentations uploaded to the website, expense reimbursement, stuff like that. Hopefully, all that should be cleared up within the next couple weeks. After that as a group we are going to get together and decide what our next steps are. We definitely want to keep some of the momentum that we are building as a SQL Community and channel that into future SQL Saturdays and other types of community events. In the meantime, for additional training be sure to check out your local User Group and PASS. San Diego SQL Server Users Group ( http://www.sdsqlug.org/home/index.cfm ) Orange County SQL Server Users Group ( http://www.sqloc.com/ ) L.A. SQL Server Users Group ( http://www.sql.la/ ) SQL PASS ( http://www.sqlpass.org/ ) 24 Hours of PASS ( http://www.sqlpass.org/24hours/2010/ ) So stay tuned, there will be more events to come in SoCal!!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Games to Vista Game explorer with Inno Setup

  - by Kraemer

  Ok, i'm trying to force my inno setup installer to add a shortcut of my game to Vista Games Explorer. Theoretically this should do the trick: [Files] Source: "GameuxInstallHelper.dll"; DestDir: "{app}"; Flags: ignoreversion overwritereadonly; [Registry] Root: HKLM; Subkey: SOFTWARE\dir\dir; Flags: uninsdeletekeyifempty Root: HKLM; Subkey: SOFTWARE\dir\dir; ValueName: Path; ValueType: String; ValueData: {app}; Flags: uninsdeletekey Root: HKLM; Subkey: SOFTWARE\dir\dir; ValueName: AppFile; ValueType: String; ValueData:{app}\executable.exe ; Flags: uninsdeletekey [CustomMessages] en.Local=en en.removemsg=Do you wish to remove game saves and settings? en.taskentry=Play [Code] const PlayTask = 0; AllUsers = 2; Current = 3; type TGUID = record Data1: Cardinal; Data2, Data3: Word; Data4: array [0..7] of char; end; var GUID: TGUID; function GetDC(HWND: DWord): DWord; external '[email protected] stdcall'; function GetDeviceCaps(DC: DWord; Index: Integer): Integer; external '[email protected] stdcall'; function ReleaseDC(HWND: DWord;DC: DWord): Integer; external '[email protected] stdcall'; function ShowWindow(hWnd: DWord; nCmdShow: Integer): boolean; external '[email protected] stdcall'; function SetWindowLong(hWnd: DWord; nIndex: Integer; dwNewLong: Longint):Longint; external '[email protected] stdcall'; function GenerateGUID(var GUID: TGUID): Cardinal; external 'GenerateGUID@files:GameuxInstallHelper.dll stdcall setuponly'; function AddToGameExplorer(Binary: String; Path: String; InstallType: Integer; var GUID: TGUID): Cardinal; external 'AddToGameExplorerW@files:GameuxInstallHelper.dll stdcall setuponly'; function CreateTask(InstallType: Integer; var GUID: TGUID; TaskType: Integer; TaskNumber: Integer; TaskName: String; Binary: String; Parameters: String): Cardinal; external 'CreateTaskW@files:GameuxInstallHelper.dll stdcall setuponly'; function RetrieveGUIDForApplication(Binary: String; var GUID: TGUID): Cardinal; external 'RetrieveGUIDForApplicationW@{app}\GameuxInstallHelper.dll stdcall uninstallonly'; function RemoveFromGameExplorer(var GUID: TGUID): Cardinal; external 'RemoveFromGameExplorer@{app}\GameuxInstallHelper.dll stdcall uninstallonly'; function RemoveTasks(var GUID: TGUID): Cardinal; external 'RemoveTasks@{app}\GameuxInstallHelper.dll stdcall uninstallonly'; function InitializeSetup(): Boolean; var appath: string; ResultCode: Integer; begin if RegKeyExists(HKEY_LOCAL_MACHINE, 'SOFTWARE\dir\dir') then begin RegQueryStringValue(HKEY_LOCAL_MACHINE, 'SOFTWARE\dir\dir', 'Path', appath) Exec((appath +'\unins000.exe'), '', '', SW_SHOW, ewWaitUntilTerminated, ResultCode) end else begin Result := TRUE end; end; procedure CurUninstallStepChanged(CurUninstallStep: TUninstallStep); begin if CurUninstallStep = usUninstall then begin if GetWindowsVersion shr 24 > 5 then begin RetrieveGUIDForApplication(ExpandConstant('{app}\AWL_Release.dll'), GUID); RemoveFromGameExplorer(GUID); RemoveTasks(GUID); UnloadDll(ExpandConstant('{app}\GameuxInstallHelper.dll')); end; end; if CurUninstallStep = usPostUninstall then begin if MsgBox(ExpandConstant('{cm:removemsg}'), mbConfirmation, MB_YESNO)=IDYES then begin DelTree(ExpandConstant('{app}'), True, True, True); end; end; end; procedure CurStepChanged(CurStep: TSetupStep); begin if GetWindowsVersion shr 24 > 5 then begin if CurStep = ssInstall then GenerateGUID(GUID); if CurStep = ssPostInstall then begin AddToGameExplorer(ExpandConstant('{app}\AWL_Release.dll'), ExpandConstant('{app}'), Current, GUID); CreateTask(3, GUID, PlayTask, 0, ExpandConstant('{cm:taskentry}'), ExpandConstant('{app}\executable.exe'), ''); CreateTask(3, GUID, 1, 0, 'Game Website', 'http://www.gamewebsite.com/', ''); end; end; end; The installer works just fine, but it doesn't place a shortcut of my game to Games explorer. Since i believe that the problem is on the binary file i guess for that part i should ask for some help. So, can anyone please give me a hand here?

  Read the article

• How to get sound on macbook pro 4,1

  - by Thomas

  I have just installed Xubuntu 12.04.2. My soundcard is detected: thomas@thomas-pc:~$ sudo aplay -l **** List of PLAYBACK Hardware Devices **** Home directory /home/thomas not ours. card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 Everything is put to max in alsamixer and nothing is muted (all the sliders are on OO. My speakers do not work, but when I plug in a headphone I hear it very soft. When I connect my stereo and put the sound VERY loud (3-blocks-of-complaining-neighbours loud) I hear it on a normal level but crackling. I added options snd-hda-intel model=mbp5 amixer set IEC958 off to at the end of /etc/modprobe.d/alsa-base.conf. When it's still not working I tried everything here: https://help.ubuntu.com/community/SoundTroubleshooting 1 >>> list-sinks 1 sink(s) available. * index: 0 name: <alsa_output.pci-0000_00_1b.0.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 9959 volume: 0: 100% 1: 100% 0: 0.00 dB 1: 0.00 dB balance 0.00 base volume: 100% 0.00 dB volume steps: 65537 muted: no current latency: 0.00 ms max request: 0 KiB max rewind: 0 KiB monitor source: 0 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 configured latency: 0.00 ms; range is 0.50 .. 371.52 ms card: 0 <alsa_card.pci-0000_00_1b.0> module: 4 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "ALC889A Analog" alsa.id = "ALC889A Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0x9b500000 irq 46" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.name = "82801H (ICH8 Family) HD Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Built-in Audio Analog Stereo" alsa.mixer_name = "Realtek ALC889A" alsa.components = "HDA:10ec0885,106b3a00,00100103" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" ports: analog-output-speaker: Speakers (priority 10000, available: unknown) properties: analog-output-headphones: Headphones (priority 9000, available: no) properties: active port: <analog-output-speaker> 2 and 3: Doesn't seem an permission issue, the sound is very far away (See opening paragraph). 4 thomas@thomas-pc:~$ sudo aplay -l **** List of PLAYBACK Hardware Devices **** Home directory /home/thomas not ours. card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 5 thomas@thomas-pc:~$ find /lib/modules/`uname -r` | grep snd /lib/modules/3.2.0-48-generic/kernel/sound/core/snd-hwdep.ko /lib/modules/3.2.0-48-generic/kernel/sound/core/snd-pcm.ko [.. huge lists continues ..] /lib/modules/3.2.0-48-generic/kernel/sound/pcmcia/pdaudiocf/snd-pdaudiocf.ko /lib/modules/3.2.0-48-generic/kernel/sound/pcmcia/vx/snd-vxpocket.ko thomas@thomas-pc:~$ 6 thomas@thomas-pc:~$ lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) Subsystem: Apple Inc. Device 00a4 Flags: bus master, fast devsel, latency 0, IRQ 46 Memory at 9b500000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 7 I guess it's supported. Linux mint and Xubuntu 13.04 had no trouble with sounds. Everything worked out of the box Thanks in advance Edit: alsa-info.sh output: WARNING: /etc/modprobe.d/alsa-base.conf line 45: ignoring bad line starting with 'amixer' ALSA Information Script v 0.4.62 -------------------------------- This script visits the following commands/files to collect diagnostic information about your ALSA installation and sound related hardware. dmesg lspci lsmod aplay amixer alsactl /proc/asound/ /sys/class/sound/ ~/.asoundrc (etc.) See './alsa-info.sh --help' for command line options. WARNING: /etc/modprobe.d/alsa-base.conf line 45: ignoring bad line starting with 'amixer' Automatically upload ALSA information to www.alsa-project.org? [y/N] : y Uploading information to www.alsa-project.org ... Done! Your ALSA information is located at http://www.alsa-project.org/db/?f=6cffc584284d4c0b266eb53249824ef83d6c4e3e Please inform the person helping you. thomas@thomas-pc:~$

  Read the article

• Ubuntu 11 and 12 initially fast but later bogs down, CPU pegged

  - by uos??

  I started with Ubuntu 11 a few weeks ago. It's on a DELL M4300 with a OCZ SSD. Default setup, except that I've installed the proprietary NVIDIA graphics and BROADCOM wireless drivers. Dual boot with Windows. If I cold boot into Ubuntu, it is very fast, just like the Windows experience that I'm used to. But SOMETHING happens, and I haven't yet determined what, but the system gets incredibly slow and stays that way. At first I thought it had to do with Adobe Flash because it seemed to be triggered by sites with Flash. But then I removed Flash and the problem remains. I thought it was just an overheating problem, but I've now upgraded to 12.04 which supposedly fixes the overheating problems I've read about. Perhaps the heat situation was brought on by Flash in my early cases? So I installed Jupiter for CPU management, but the thermometer reports a familiar Windows-side temperature of 53 degrees Celsius. Switching Jupiter to lower performance doesn't help. When I check the System Monitor application, sorting by CPU usage, there are no obvious problem processes. However, in the graphs tab, both CPU cores are pegged at 100%! I notice that the slowness seems to be similar to the extremely bad performance I got prior to installing the NVIDIA drivers. I'm not sure if that helps. This is the strangest part to me - although the temperature seems OK, even after rebooting, the system remains slow - starting with GRUB2 which is very noticeably delayed, all the way through to either Ubuntu or Windows! That's right, even the Windows side suffers effects and takes several minutes to complete booting whereas normally (with my SSD) it's ready to use in 15 seconds. The only way to fix it is to shutdown and let the parts cool down. Or maybe it just needs to completely power off and boot rather than a soft reboot, temperature has nothing to do with it? - is that possible? But know that I have never had this problem in Windows, even if Windows gets very hot (135 F) a reboot would be enough time for it to recover. For this reason, I don't think it's a heat thing, but I can't imagine what else could be surviving the reboot. I'm entirely updated - there are no pending updates. I have the Post-Release updates of NVIDIA too, btw. If this sounds CLOSE to something you know about, but one of the details doesn't line up exactly, it might be a mistake in my perception. Are there tests you can suggest to rule something out? Thanks! processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz stepping : 6 microcode : 0x60c cpu MHz : 800.000 cache size : 6144 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm ida dts tpr_shadow vnmi flexpriority bogomips : 5187.00 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz stepping : 6 microcode : 0x60c cpu MHz : 800.000 cache size : 6144 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm ida dts tpr_shadow vnmi flexpriority bogomips : 5186.94 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: (Redundant figures removed. You can view them in the edits if they are still relevant) ps: %CPU PID USER COMMAND 9.4 2399 jason gnome-terminal 6.2 2408 jason bash 17.3 1117 root /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none 13.7 1667 jason compiz 1.3 1960 jason /usr/lib/unity/unity-panel-service 1.3 1697 jason python /usr/bin/jupiter 0.9 1964 jason /usr/lib/indicator-appmenu/hud-service 0.6 1689 jason nautilus -n 0.4 1458 jason //bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session I should highlight specifically that GRUB2 can also be very slow. I don't know the relationship of which scenarios GRUB2 is also slow, but WHEN it is slow, it is slow both before the menu appears and after the selection is made - although for the diagnosis of GRUB2 it is harder for me to tell what the normal speeds should be. With SSD, I would expect that GRUB2 could load instantly, and that the GRUB2 purple would disappear instantly after the selection. The only delay to be expected is the change in graphics modes (though I couldn't guess why that ever requires any noticeable time)

  Read the article

• Data Mining Resources

  - by Dejan Sarka

  There are many different types of analyses, each one with its own pros and cons. Relational reports have a predefined structure, and end users cannot change it. They are simple to use for end users. Reports can use real-time data and snapshots of data to show the state of a report at specific points in time. One of the drawbacks is that report authoring is limited to IT pros and advanced users. Any kind of dynamic restructuring is very limited. If real-time data is used for a report, the report has a negative impact on the performance of the source system. Processing of the reports might be slow because the data comes from relational database management systems, which are not optimized for reporting only. If you create a semantic model of your data, your end users can create ad-hoc report structures. However, the development is more complex because a developer is needed to create these semantic models. For OLAP, you typically use specialized database management systems. You get lightning speed of analyses. End users can use rich and thin clients to interactively change the structure of the report. Typically, they do it graphically. However, the development of an OLAP system is many times quite complex. It involves the preparation and maintenance of an enterprise data warehouse and OLAP cubes. In order to exploit the possibility of real-time restructuring of reports, the users must be both active and educated. The data is usually stale, as it is loaded into data warehouses and OLAP cubes with a scheduled process. With data mining, a structure is not selected in advance; it searches for the structure. As a result, data mining can give you the most valuable results because you can discover patterns you did not expect. A data mining model structure is limited only by the attributes that you use to train the model. One of the drawbacks is that a lot of knowledge is needed for a successful data mining project. End users have to understand the results. Subject matter experts and IT professionals need to understand business problem thoroughly. The development might be sometimes even more complex than the development of OLAP cubes. Each type of analysis has its own place in an enterprise system. SQL Server has tools for all kinds of analyses. However, data mining is the most advanced way of analyzing the data; this is the “I” in BI. In order to get the most out of it, you need to learn quite a lot. In this blog post, I am gathering together resources for learning, including forthcoming events. Books Multiple authors: SQL Server MVP Deep Dives – I wrote an introductory data mining chapter there. Erik Veerman, Teo Lachev and Dejan Sarka: MCTS Self-Paced Training Kit (Exam 70-448): Microsoft SQL Server 2008 - Business Intelligence Development and Maintenance – you can find a good overview of a complete BI solution, including data mining, in this book. Jamie MacLennan, ZhaoHui Tang, and Bogdan Crivat: Data Mining with Microsoft SQL Server 2008 – can’t miss this book if you want to mine your data with SQL Server tools. Michael Berry, Gordon Linoff: Mastering Data Mining: The Art and Science of Customer Relationship Management – data mining from both, business and technical perspective. Dorian Pyle: Data Preparation for Data Mining – an in-depth book about data preparation. Thomas and Ronald Wonnacott: Introductory Statistics – if you thought that you could get away without statistics, then you are not serious about data mining. Jiawei Han and Micheline Kamber: Data Mining Concepts and Techniques – in-depth explanation of the most popular data mining algorithms. Michael Berry and Gordon Linoff: Data Mining Techniques – another book that explains data mining algorithms, more fro a business perspective. Paolo Guidici: Applied Data Mining – very mathematical book, only if you enjoy statistics and mathematics in general. Forthcoming presentations I am presenting two data mining related sessions during the PASS Summit in Charlotte, NC: Wednesday, October 16th, 2013 - Fraud Detection: Notes from the Field – I am showing how to use data mining for a specific business problem. The presentation is based on real-life projects. Friday, October 18th: Excel 2013 Advanced Analytics – I am focusing on Excel Data Mining Add-ins, and how to use them together with Power Pivot and other add-ins. This is the most you can get out of Excel. Sinergija 2013, Belgrade, Serbia Tuesday, October 22nd: Excel 2013 Analytics to the Max – another presentation focusing on the most advanced analytics you can get in Excel. SQL Rally Amsterdam, Netherlands Thursday, November 7th: Advanced Analytics in Excel 2013 – and again I am presenting about data mining in Excel. Why three different titles for the same presentation? I don’t know, I guess I forgot the name I proposed every time right after I sent the proposal. Courses Data Mining with SQL Server 2012 – I wrote a 3-day course for SolidQ. If you are interested in this course, which I could also deliver in a shorter seminar way, you can contact your closes SolidQ subsidiary, or, of course, me directly on addresses [email protected] or [email protected]. This course could also complement the existing courseware portfolio of training providers, which are welcome to contact me as well. OK, now you know: no more excuses, start learning data mining, get the most out of your data

  Read the article

• UserAppDataPath in WPF

  - by psheriff

  In Windows Forms applications you were able to get to your user's roaming profile directory very easily using the Application.UserAppDataPath property. This folder allows you to store information for your program in a custom folder specifically for your program. The format of this directory looks like this: C:\Users\YOUR NAME\AppData\Roaming\COMPANY NAME\APPLICATION NAME\APPLICATION VERSION For example, on my Windows 7 64-bit system, this folder would look like this for a Windows Forms Application: C:\Users\PSheriff\AppData\Roaming\PDSA, Inc.\WindowsFormsApplication1\1.0.0.0 For some reason Microsoft did not expose this property from the Application object of WPF applications. I guess they think that we don't need this property in WPF? Well, sometimes we still do need to get at this folder. You have two choices on how to retrieve this property. Add a reference to the System.Windows.Forms.dll to your WPF application and use this property directly. Or, you can write your own method to build the same path. If you add a reference to the System.Windows.Forms.dll you will need to use System.Windows.Forms.Application.UserAppDataPath to access this property. Create a GetUserAppDataPath Method in WPF If you want to build this path you can do so with just a few method calls in WPF using Reflection. The code below shows this fairly simple method to retrieve the same folder as shown above. C#using System.Reflection; public string GetUserAppDataPath(){  string path = string.Empty;  Assembly assm;  Type at;  object[] r;   // Get the .EXE assembly  assm = Assembly.GetEntryAssembly();  // Get a 'Type' of the AssemblyCompanyAttribute  at = typeof(AssemblyCompanyAttribute);  // Get a collection of custom attributes from the .EXE assembly  r = assm.GetCustomAttributes(at, false);  // Get the Company Attribute  AssemblyCompanyAttribute ct =                 ((AssemblyCompanyAttribute)(r[0]));  // Build the User App Data Path  path = Environment.GetFolderPath(              Environment.SpecialFolder.ApplicationData);  path += @"\" + ct.Company;  path += @"\" + assm.GetName().Version.ToString();   return path;} Visual BasicPublic Function GetUserAppDataPath() As String  Dim path As String = String.Empty  Dim assm As Assembly  Dim at As Type  Dim r As Object()   ' Get the .EXE assembly  assm = Assembly.GetEntryAssembly()  ' Get a 'Type' of the AssemblyCompanyAttribute  at = GetType(AssemblyCompanyAttribute)  ' Get a collection of custom attributes from the .EXE assembly  r = assm.GetCustomAttributes(at, False)  ' Get the Company Attribute  Dim ct As AssemblyCompanyAttribute = _                 DirectCast(r(0), AssemblyCompanyAttribute)  ' Build the User App Data Path  path = Environment.GetFolderPath( _                 Environment.SpecialFolder.ApplicationData)  path &= "\" & ct.Company  path &= "\" & assm.GetName().Version.ToString()   Return pathEnd Function Summary Getting the User Application Data Path folder in WPF is fairly simple with just a few method calls using Reflection. Of course, there is absolutely no reason you cannot just add a reference to the System.Windows.Forms.dll to your WPF application and use that Application object. After all, System.Windows.Forms.dll is a part of the .NET Framework and can be used from WPF with no issues at all. NOTE: Visit http://www.pdsa.com/downloads to get more tips and tricks like this one. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **We frequently offer a FREE gift for readers of my blog. Visit http://www.pdsa.com/Event/Blog for your FREE gift!

  Read the article

• International Radio Operators Alphabet in F# &amp; Silverlight &ndash; Part 1

  - by MarkPearl

  So I have been delving into F# more and more and thought the best way to learn the language is to write something useful. I have been meaning to get some more Silverlight knowledge (up to now I have mainly been doing WPF) so I came up with a really simple project that I can actually use at work. Simply put – I often get support calls from clients wanting new activation codes. One of our main app’s was written in VB6 and had its own “security” where it would require about a 45 character sequence for it to be activated. The catch being that each time you reopen the program it would require a different character sequence, which meant that when we activate clients systems we have to do it live! This involves us either referring them to a website, or reading the characters to them over the phone and since nobody in the office knows the IROA off by heart we would come up with some interesting words to represent characters… 9 times out of 10 the client would type in the wrong character and we would have to start all over again… with this app I am hoping to reduce the errors of reading characters over the phone by treating it like a ham radio. My “Silverlight” application will allow for the user to input a series of characters and the system will then generate the equivalent IROA words… very basic stuff e.g. Character Input – abc Words Generated – Alpha Bravo Charlie After listening to Anders Hejlsberg on Dot Net Rocks Show 541 he mentioned that he felt many applications could make use of F# but in an almost silo basis – meaning that you would write modules that leant themselves to Functional Programming in F# and then incorporate it into a solution where the front end may be in C# or where you would have some other sort of glue. I buy into this kind of approach, so in this project I will use F# to do my very intensive “Business Logic” and will use Silverlight/C# to do the front end. F# Business Layer I am no expert at this, so I am sure to get some feedback on way I could improve my algorithm. My approach was really simple. I would need a function that would convert a single character to a string – i.e. ‘A’ –> “Alpha” and then I would need a function that would take a string of characters, convert them into a sequence of characters, and then apply my converter to return a sequence of words… make sense? Lets start with the CharToString function let CharToString (element:char) = match element.ToString().ToLower() with | "1" -> "1" | "5" -> "5" | "9" -> "9" | "2" -> "2" | "6" -> "6" | "0" -> "0" | "3" -> "3" | "7" -> "7" | "4" -> "4" | "8" -> "8" | "a" -> "Alpha" | "b" -> "Bravo" | "c" -> "Charlie" | "d" -> "Delta" | "e" -> "Echo" | "f" -> "Foxtrot" | "g" -> "Golf" | "h" -> "Hotel" | "i" -> "India" | "j" -> "Juliet" | "k" -> "Kilo" | "l" -> "Lima" | "m" -> "Mike" | "n" -> "November" | "o" -> "Oscar" | "p" -> "Papa" | "q" -> "Quebec" | "r" -> "Romeo" | "s" -> "Sierra" | "t" -> "Tango" | "u" -> "Uniform" | "v" -> "Victor" | "w" -> "Whiskey" | "x" -> "XRay" | "y" -> "Yankee" | "z" -> "Zulu" | element -> "Unknown" Quite simple, an element is passed in, this element is them converted to a lowercase single character string and then matched up with the equivalent word. If by some chance a character is not recognized, “Unknown” will be returned… I know need a function that can take a string and can parse each character of the string and generate a new sequence with the converted words… let ConvertCharsToStrings (s:string) = s |> Seq.toArray |> Seq.map(fun elem -> CharToString(elem)) Here… the Seq.toArray converts the string to a sequence of characters. I then searched for some way to parse through every element in the sequence. Originally I tried Seq.iter, but I think my understanding of what iter does was incorrect. Eventually I found Seq.map, which applies a function to every element in a sequence and then creates a new collection with the adjusted processed element. It turned out to be exactly what I needed… To test that everything worked I created one more function that parsed through every element in a sequence and printed it. AT this point I realized the the Seq.iter would be ideal for this… So my testing code is below… let PrintStrings items = items |> Seq.iter(fun x -> Console.Write(x.ToString() + " ")) let newSeq = ConvertCharsToStrings("acdefg123") PrintStrings newSeq Console.ReadLine()   Pretty basic stuff I guess… I hope my approach was right? In Part 2 I will look into doing a simple Silverlight Frontend, referencing the projects together and deploying….

  Read the article

• SQL Saturday 43 in Redmond

  - by AjarnMark

  I attended my first SQLSaturday a couple of days ago, SQLSaturday #43 in Redmond (at Microsoft).  I got there really early, primarily because I forgot how fast I can get there from my home when nobody else is on the road.  On a weekday in rush hour traffic, that would have taken two hours to get there.  I gave myself 90 minutes, and actually got there in about 45.  Crazy! I made the mistake of going to the main Microsoft campus, but that’s not where the event was being held.  Instead it was in a big Microsoft conference center on the other side of the highway.  Fortunately, I had the address with me and quickly realized my mistake.  When I got back on track, I noticed that there were bright yellow signs out on the street corner that looked like they said they were for SOL Saturday, which actually was appropriate since it was the sunniest day around here in a long time. Since I was there so early, the registration was just getting setup, so I found Greg Larsen who was coordinating things and offered to help.  He put me to work with a group of people organizing the pre-printed raffle tickets and stuffing swag bags. I had never been to a SQLSaturday before this one, so I wasn’t exactly sure what to expect even though I have read about a few on some blogs.  It makes sense that each one will be a little bit different since they are almost completely volunteer driven, and the whole concept is still in its early stages.  I have been to the PASS Summit for the last several years, and was hoping for a smaller version of that.  Now, it’s not really fair to compare one free day of training run entirely by volunteers with a multi-day, $1,000+ event put on under the direction of a professional event management company.  But there are some parallels. At this SQLSaturday, there was no opening general session, just coffee and pastries in the common area / expo hallway and straight into the first group of sessions.  I don’t know if that was because there was no single room large enough to hold everyone, or for other reasons.  This worked out okay, but the organization guy in me would have preferred to have even a 15 minute welcome message from the organizers with a little overview of the day.  Even something as simple as, “Thanks to persons X, Y, and Z for helping put this together…Sessions will start in 20 minutes and are all in rooms down this hallway…the bathrooms are on the other side of the conference center…lunch today is pizza and we would like to thank sponsor Q for providing it.”  It doesn’t need to be much, certainly not a full-blown Keynote like at the PASS Summit, but something to use as a rallying point to pull everyone together and get the day off to an official start would be nice.  Again, there may have been logistical reasons why that was not feasible here.  I’m just putting out my thoughts for other SQLSaturday coordinators to consider. The event overall was great.  I believe that there were over 300 in attendance, and everything seemed to run smoothly.  At least from an attendee’s point of view where there was plenty of muffins in the morning and pizza in the afternoon, with plenty of pop to drink.  And hey, if you’ve got the food and drink covered, a lot of other stuff could go wrong and people will be very forgiving.  But as I said, everything appeared to run pretty smoothly, at least until Buck Woody showed up in his Oracle shirt.  Other than that, the volunteers did a great job! I was a little surprised by how few people in my own backyard that I know.  It makes sense if you really think about it, given how many companies must be using SQL Server around here.  I guess I just got spoiled coming into the PASS Summit with a few contacts that I already knew would be there.  Perhaps I have been spending too much time with too few people at the Summits and I need to step out and meet more folks.  Of course, it also is different since the Summit is the big national event and a number of the folks I know are spread out across the country, so the Summit is the only time we’re all in the same place at the same time.  I did make a few new contacts at SQLSaturday, and bumped into a couple of people that I knew (and a couple others that I only knew from Twitter, and didn’t even realize that they were here in the area). Other than the sheer entertainment value of Buck Woody’s session, the one that was probably the greatest value for me was a quick introduction to PowerShell.  I have not done anything with it yet, but I think it will be a good tool to use to implement my plans for automated database recovery testing.  I saw just enough at the session to take away some of the intimidation factor, and I am getting ready to jump in and see what I can put together in the next few weeks.  And that right there made the investment worthwhile.  So I encourage you, if you have the opportunity to go to a SQLSaturday event near you, go for it!

  Read the article

• SQL Server devs–what source control system do you use, if any? (answer and maybe win free stuff)

  - by jamiet

  Recently I noticed a tweet from notable SQL Server author and community dude-at-large Steve Jones in which he asked how many SQL Server developers were putting their SQL Server source code (i.e. DDL) under source control (I’m paraphrasing because I can’t remember the exact tweet and Twitter’s search functionality is useless). The question surprised me slightly as I thought a more pertinent question would be “how many SQL Server developers are not using source control?” because I have been doing just that for many years now and I simply assumed that use of source control is a given in this day and age. Then I started thinking about it. “Perhaps I’m wrong” I pondered, “perhaps the SQL Server folks that do use source control in their day-to-day jobs are in the minority”. So, dear reader, I’m interested to know a little bit more about your use of source control. Are you putting your SQL Server code into a source control system? If so, what source control server software (e.g. TFS, Git, SVN, Mercurial, SourceSafe, Perforce) are you using? What source control client software are you using (e.g. TFS Team Explorer, Tortoise, Red Gate SQL Source Control, Red Gate SQL Connect, Git Bash, etc…)? Why did you make those particular software choices? Any interesting anecdotes to share in regard to your use of source control and SQL Server? To encourage you to contribute I have five pairs of licenses for Red Gate SQL Source Control and Red Gate SQL Connect to give away to what I consider to be the five best replies (“best” is totally subjective of course but this is my blog so my decision is final ), if you want to be considered don’t forget to leave contact details; email address, Twitter handle or similar will do. To start you off and to perhaps get the brain cells whirring, here are my answers to the questions above: Are you putting your SQL Server code into a source control system? As I think I’ve already said…yes. Always. If so, what source control server software (e.g. TFS, Git, SVN, Mercurial, SourceSafe, Perforce) are you using? I move around a lot between many clients so it changes on a fairly regular basis; my current client uses Team Foundation Server (aka TFS) and as part of a separate project is trialing the use of Team Foundation Service. I have used SVN extensively in the past which I am a fan of (I generally prefer it to TFS) and am trying to get my head around Git by using it for ObjectStorageHelper. What source control client software are you using (e.g. TFS Team Explorer, Tortoise, Red Gate SQL Source Control, Red Gate SQL Connect, Git Bash, etc…)? On my current project, Team Explorer. In the past I have used Tortoise to connect to SVN. Why did you make those particular software choices? I generally use whatever the client uses and given that I work with SQL Server I find that the majority of my clients use TFS, I guess simply because they are Microsoft development shops. Any interesting anecdotes to share in regard to your use of source control and SQL Server? Not an anecdote as such but I am going to share some frustrations about TFS. In many ways TFS is a great product because it integrates many separate functions (source control, work item tracking, build agents) into one whole and I’m firmly of the opinion that that is a good thing if for no reason other than being able to associate your check-ins with a work-item. However, like many people there are aspects to TFS source control that annoy me day-in, day-out. Chief among them has to be the fact that it uses a file’s read-only property to determine if a file should be checked-out or not and, if it determines that it should, it will happily do that check-out on your behalf without you even asking it to. I didn’t realise how ridiculous this was until I first used SVN about three years ago – with SVN you make any changes you wish and then use your source control client to determine which files have changed and thus be checked-in; the notion of “check-out” doesn’t even exist. That sounds like a small thing but you don’t realise how liberating it is until you actually start working that way. Hoping to hear some more anecdotes and opinions in the comments. Remember….free software is up for grabs! @jamiet 

  Read the article

• Advice on learning programming languages and math.

  - by Joris Ooms

  I feel like I'm getting stuck lately when it comes to learning about programming-related things; I thought I'd ask a question here and write it all down in the hope to get some pointers/advice from people. Perhaps writing it down helps me put things in perspective for myself aswell. I study Interactive Multimedia Design. This course is based on two things: graphic design on one hand, and web development on the other hand. I have quite a decent knowledge of web-related languages (the usual HTML/JS/PHP) and I'll be getting a course on ASP.NET next year. In my free time, I have learnt how to work with CodeIgniter, aswell as some diving into Ruby (and Rails) and basic iOS programming. In my first year of college I also did a class on Java (19/20 on the end result). This grade doesn't really mean anything though; I have the basics of OOP down but Java-wise, we learnt next to nothing. Considering the time I have been programming in, for example, PHP.. I can't say I'm bad at it. I'm definitely not good or great at it, but I'm decent. My teachers tell me I have the programming thing down. They just tell me I should keep on learning. So that's what I do, and I try to take in as much as possible; however, sometimes I'm unsure where to start and I have this tendency to always doubt myself. Now, for the 'question'. I want to get into iOS programming. I know iOS programming boils down to programming in Cocoa Touch and Objective-C. I also know Obj-C is a superset of C. I have done a class on C a couple of years ago, but I failed miserably. I got stuck at pointers and never really understood them.. Until like a month ago. I suddenly 'got' it. I have been working through a book on Objective-C for a week or so now, and I understand the basics (I'm at like.. chapter 6 or so). However, I keep running into similar problems as the ones I had when I did the C class: I suck at math. No, really. I come from a Latin-Modern Languages background in high school and I had nearly no math classes back then. I wanted to study Computer Science, but I failed there because of the miserable state of my mathematics knowledge. I can't explain why I'm suddenly talking about math here though, because it isn't directly related to programming.. yet it is. For example, the examples in the book I'm reading now are about programming a fraction-calculator. All good, I can do the programming when I get the formulas down.. but it takes me a full day or more to actually get to that point. I also find it hard to come up with ideas for myself. I made one small iOS app the other day and it's just a button / label kind of thing. When I press the button, it generates a random number. That's really all I could come up with. Can you 'learn' that? It probably comes down to creativity, but evidently, I'm not too great at being creative. Are there any sites or resources out there that provide something like a basic list of things you can program when you're just starting out? Maybe I'm focusing on too many things at once. I want to keep my HTML/CSS at a decent level, while learning PHP and CodeIgniter, while diving into Ruby on Rails and learning Objective-C and the iOS SDK at the same time. I just want to be good at something, I guess. The problem is that I can't seem to be happy with my PHP stuff. I want more, something 'harder'; that's why I decided to pick up the iOS thing. Like I said, I have the basics down of a lot of different languages. I can program something simple in Java, in C, in Objective-C as of this week.. but it ends there. Mostly because I can't come up with ideas for more complex applications, and also because I just doubt myself: 'Oh, that's too complex, I can never do that'. And then it ends there. To conclude my rant, let me basically rephrase my questions into a 'tl;dr' part. A. I want to get into iOS programming and I have basic knowledge of C/Objective-C. However, I struggle to come up with ideas of my own and implement them and I also suck at math which is something that isn't directly related to, yet often needed while programming. What can I do? B. I have an interest in a lot of different programming languages and I can't stop reading/learning. However, I don't feel like I'm good in anything. Should I perhaps focus on just one language for a year or longer, or keep taking it all in at the same time and hope I'll finally get them all down? C. Are there any resources out there that provide basic ideas of things I can program? I'm thinking about 'simple' command-line applications here to help me while studying C/Obj-C away from the whole iPhone SDK. Like I said, the examples in my book are mainly math-based (fraction calculator) and it's kinda hard. :( Thanks a lot for reading my post. I didn't plan it to be this long but oh well. Thanks in advance for any answers.

  Read the article

• How do you use blog content?

  - by fatherjack

  Do you write a blog, have you ever thought about it? I think people fall into one of a few categories when it comes to blogs, especially blogs with technical content. Writing articles furiously - daily, twice daily and reading dozens of others. Writing the odd piece of content and read plenty of others' output. Started a blog once and its fizzled out but reading lots. Thought about starting a blog someday but never got around to it, hopping into the occasional blog when a link or a Tweet takes them there. Never thought about writing one but often catching content from them when Google (or other preferred search engine) finds content related to their search. Now I am not saying that either of these is right or wrong, nor am I saying that anyone should feel any compulsion to be in any particular category. What I would say is that you as a blog reader have the power to move blog writers from one category to another. How, you might ask? How do I have any power over a blog writer? It is very simple - feedback. If you give feedback then the blog writer knows that they are reaching an audience, if there is no response then they we are simply writing down our thoughts for what could amount to nothing more than a feeble amount of exercise and a few more key stokes towards the onset of RSI. Most blogs have a mechanism to alert the writer when there are comments, and personally speaking, if an email is received saying there has been a response to a blog article then there is a rush of enthusiasm, a moment of excitement that someone is actually reading and considering the text that was submitted and made available for the whole world to read. I am relatively new to this blog game and could be in some extended honeymoon period as I have also recently been incorporated into the Simple Talk 'stable'. I can understand that once you get to the "Dizzy Heights of Ozar" (www.brentozar.com) then getting comments and feedback might not be such a pleasure and may even be rather more of a chore but that, I guess, is the price of fame. For us mere mortals starting out blogging, getting feedback (or even at the moment for me, simply the hope of getting feedback) is what keeps it going. The hope that you will pick a topic that hasn't been done recently by Brad McGehee, Grant Fritchey,  Paul Randall, Thomas LaRock or any one of the dozen of rock star bloggers listed here or others from SQLServerPedia and so on, and then do it well enough to be found, reviewed, or <shudder> (re)tweeted to bring more visitors is what we are striving for, along with the fact that the content we might produce is something that will be of benefit to others. There is only so much point to typing content that no-one is reading and putting it on a blog. You may as well just write it in a diary. A technical blog is not like, say, a blog covering photography techniques where the way to frame and take a picture stands true whether it was written last week, last year or last century - technical content goes sour, quite quickly. There isn't much call for articles about yesterdays technology unless its something that still applies to current versions too, so some content written no more than 2 years ago isn't worth having now. The combination of a piece of content that you know is going to not last long and the fact that no-one reads it is a strong force against writing anything else. Getting feedback counters that despair and gives a value to writing something new. I would say that any feedback is good but there are obviously comments that are just so negative or otherwise badly phrased that they would hasten the demise of a blog but, in general most feedback will encourage a writer. It may not be a comment that supports or agrees with the main theme of a post but if it generates discussion or opens up a previously unexplored viewpoint it is contributing to the blog and is therefore encouraging to the writer. Even if you only say "thank you" before you leave a blog, having taken a section of script to use for yourself or having been given a few links to some content that has widened your knowledge it will be so welcome to the blog owner. Isn't it also the decent thing to do, acknowledging that you have benefited from another's efforts?

  Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >