Search Results

Search found 7126 results on 286 pages for 'wireless router'.

Page 276/286 | < Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >

• TCP/IP & throughput between FreeNAS (BSD) server & other LAN machines

  - by Tim Dickerson

  I have got a question for someone that knows BSD a bit better than me that are in regards to my LAN setup at home/work here outside Chicago. I can't seem to fully optimize my network's (LAN) thoughput via my FreeNAS (BSD based) file server. It runs with the latest FreeBSD release which is modified to support several protocols for file transfers and more. Every machine that is behind my Smoothwall (Linux based) router is on the usual 192.168.0.x subnet and for most part works just fine. Behind the Smoothwall box, all machines are connected to a GB HP unmanaged switch. I host a large WISP here and have an OC-3 connection here at home/work and have no issues with downloading/uploading from/to the 'net'. My problem is with throughput. When I try and transfer large files...really any for that matter..between any of the machines to/and from the FreeNAS server via FTP, the max throughput I can achieve say between a Win 7 or a Linux box is ~65Mbit/sec. All machines are running Intel Pro 1000 GB NIC's and all cable is CAT6. Each is set to 'auto negotiation' and each shows 1500 MTU Full Duplex @1GB so I know the hardware is okay. I have not adjusted the MTU on any machine as I understand it to be pointless unless certain configurations are used (I assume I am not one of those). My settings for the FreeNAS machine are the following: # FreeNAS /etc/sysctl.conf - pertinent settings shown kern.ipc.maxsockbuf=262144 kern.ipc.nmbclusters=32768 kern.ipc.somaxconn=8192 kern.maxfiles=65536 kern.maxfilesperproc=32768 net.inet.tcp.delayed_ack=0 net.inet.tcp.inflight.enable=0 net.inet.tcp.path_mtu_discovery=0 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.recvbuf_max=16777216 net.inet.tcp.recvspace=65536 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.sendspace=65536 net.inet.udp.recvspace=65536 net.local.stream.recvspace=65536 net.local.stream.sendspace=65536 net.inet.tcp.hostcache.expire=1 From what I can tell, that looks to be a somewhat optimized profile for a typical BSD machine acting as a server for a LAN. I might be wrong and just wanted to find out from someone that knows BSD better than I do if indeed that is ok or if something is out of tune or what. Are there other ways I would find better for P2P file transfers? I honestly do not know what I SHOULD be looking for with respect to throughput between the NAS box and another client when xferring files via FTP, but I am told that what I get on average (40-70MB/sec) is too low for what it could be. I have thought about adding another NIC in the FreeNAS box as well as the Win7 machine and use a X-over cable via a static route, but wanted to check with someone first to see if that might be worth it or not. I don't know if doing that would bypass the HP GB switch and allow for a machine to machine xfer anyways. The FTP client I use is: Filezilla and have tried both active and passive modes with no real gain over each other. The NAS box runs ProFTPD.

  Read the article

• Why won't vyatta allow SMTP through my firewall?

  - by Solignis

  I am setting up a vyatta router on VMware ESXi, But I see to have hit a major snag, I could not get my firewall and NAT to work correctly. I am not sure what was wrong with NAT but it "seems" to be working now. But the firewall is not allowing traffic from my WAN interface (eth0) to my LAN (eth1). I can confirm its the firewall because I disabled all firewall rules and everything worked with just NAT. If put the firewalls (WAN and LAN) back in place nothing can get through to port 25. I am not really sure what the issue could be I am using pretty basic firewall rules, I wrote the rules while looking at the vyatta docs so unless there is something odd with the documentation they "should" be working. Here is my NAT rules so far; vyatta@gateway# show service nat rule 20 { description "Zimbra SNAT #1" outbound-interface eth0 outside-address { address 74.XXX.XXX.XXX } source { address 10.0.0.17 } type source } rule 21 { description "Zimbra SMTP #1" destination { address 74.XXX.XXX.XXX port 25 } inbound-interface eth0 inside-address { address 10.0.0.17 } protocol tcp type destination } rule 100 { description "Default LAN -> WAN" outbound-interface eth0 outside-address { address 74.XXX.XXX.XXX } source { address 10.0.0.0/24 } type source } Then here is my firewall rules, this is where I believe the problem is. vyatta@gateway# show firewall all-ping enable broadcast-ping disable conntrack-expect-table-size 4096 conntrack-hash-size 4096 conntrack-table-size 32768 conntrack-tcp-loose enable ipv6-receive-redirects disable ipv6-src-route disable ip-src-route disable log-martians enable name LAN_in { rule 100 { action accept description "Default LAN -> any" protocol all source { address 10.0.0.0/24 } } } name LAN_out { } name LOCAL { rule 100 { action accept state { established enable } } } name WAN_in { rule 20 { action accept description "Allow SMTP connections to MX01" destination { address 74.XXX.XXX.XXX port 25 } protocol tcp } rule 100 { action accept description "Allow established connections back through" state { established enable } } } name WAN_out { } receive-redirects disable send-redirects enable source-validation disable syn-cookies enable SIDENOTE To test for open ports I have using this website, http://www.yougetsignal.com/tools/open-ports/, it showed port 25 as open without the firewall rules and closed with the firewall rules. UPDATE Just to see if the firewall was working properly I made a rule to block SSH from the WAN interface. When I checked for port 22 on my primary WAN address it said it was still open even though I outright blocked the port. Here is the rule I used; rule 21 { action reject destination { address 74.219.80.163 port 22 } protocol tcp } So now I am convinced either I am doing something wrong or the firewall is not working like it should.

  Read the article

• Effecient organization of spare cables and hardware

  - by Jake Wharton

  As many of you also likely do, I have a growing collection of cables, hardware, and spare parts (screws, connectors, etc.). I'm looking to find a good system of organization so that everything isn't a tangled mess, mismatched, and potentially able to be damaged. Since the the three things listed above are all have varying sizes and degrees of delicacy this poises an interesting problem. Presently I have those cheap plastic storage bins you find at Wal-mart for everything. Cables that were once wrapped neatly have become tangled due to numerous "I know I have a cable for this" moments. Hardware is mixed in other bins with odds and ends with no protection from each other. NICs, CPUs, and HDDs are all interacting and likely causing damage. Finally there are stray parts sprinkled amongst these two both in plastic bags and loose. I'm looking to unify this storage into a controlled chaos. Here are my thoughts: Odds and ends are the easiest. Screws, connectors, and small electronic parts lend themselves perfectly to tackle boxes and jewelry boxes. Since these are usually dynamically compartmentalized I can adjust for the contents and label them on the outside or inside of the lid. Cables are easily wrangled with short velcro strips but that doesn't stop them from being all mixed in together. Hardware is the worst offender. Size, shape, and degree of delicacy changes with nearly every piece. I'm willing to sacrifice a bit of organization for a somewhat efficient manner. What are all your thoughts? What is the best type of tackle or jewelry box to use? Most of them are cheap and flimsy. Is there a better alternative? How can I organize cables to know exactly (within reason) where one is? What about associating cables with hardware (Wall adapter to router, etc.)? What kind of storage unit lends itself to all shapes of hardware? Do I need to separate by size or degree of delicacy for better organization?

  Read the article

• CentOS 5.8 dig is not resolving ip-address

  - by travisbotello

  I'm running centos 5.8 on a local machine at home. Today I was trying to analyze the DNS-Lookup via dig. $ dig +trace -t A www.heise.de. This is giving me something like this as a response de. 172800 IN NS f.nic.de. de. 172800 IN NS z.nic.de. de. 172800 IN NS s.de.net. de. 172800 IN NS n.de.net. de. 172800 IN NS a.nic.de. de. 172800 IN NS l.de.net. ;; Received 344 bytes from 192.58.128.30#53(192.58.128.30) in 49 ms In contrast my dedicated CentOS machine is returning the following de. 172800 IN NS a.nic.de. de. 172800 IN NS n.de.net. de. 172800 IN NS f.nic.de. de. 172800 IN NS z.nic.de. de. 172800 IN NS l.de.net. de. 172800 IN NS s.de.net. ;; Received 344 bytes from 192.58.128.30#53(j.root-servers.net) in 32 ms As you can see, the last line is different. Any idea why my dedicated machine is giving me the host name of the responding DNS-Server and my local machine is only returning the ip-address? Thanks in advance UPDATE The reverse DNS-Lookup is working without any problems. Also, I just checked this on my local mac and...exactly the same problem occurs. Is it possible that this has to do with the local router/modem/ISP?

  Read the article

• Ubuntu: Multiple NICs, one used only for Wake-On-LAN

  - by jcwx86

  This is similar to some other questions, but I have a specific need which is not covered in the other questions. I have an Ubuntu server (11.10) with two NICs. One is built into the motherboard and the other is a PCI express card. I want to have my server connected to the internet via my NAT router and also have it able to wake from suspend using a Magic Packet (henceforth referred to as Wake-On-LAN, WOL). I can't do this with just one of the NICs because each has an issue - the built-in NIC will crash the system if it is placed under heavy load (typically downloading data), whilst the PCI express NIC will crash the system if it is used for WOL. I have spent some time investigating these individual problems, to no avail. My plan is thus: use the built-in NIC solely for WOL, and use the PCI express card for all other network communication except WOL. Since I send the WOL Magic Packet to a specific MAC address, there is no danger of hitting the wrong NIC, but there is a danger of using the built-in NIC for general network access, overloading it and crashing the system. Both NICs are wired to the same LAN with address space 192.168.0.0/24. The built-in ethernet card is set to have interface name eth1 and the PCI express card is eth0 in Ubuntu's udev persistent rules (so they stay the same upon reboot). I have been trying to set this up with the /etc/network/interfaces file. Here is where I am currently: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 auto eth1 iface eth1 inet static address 192.168.0.254 netmask 255.255.255.0 I think by not specifying a gateway for eth1, I prevent it being used for outgoing requests. I don't mind if it can be reached on 192.168.0.254 on the LAN, i.e. via SSH -- it's IP is irrelevant to WOL, which is based on MAC addresses -- I just don't want it to be used to access internet resources. My kernel routing table (from route -n) is Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 My question is this: Is this sufficient for what I want to achieve? My research has thrown up the idea of using static routing to specify that eth1 should only be used for WOL on the local network, but I'm not sure this is necessary. I have been monitoring the activity of the interfaces using iptraf and it seems like eth0 takes the vast majority of the packets, though I am not sure that this will be consistent based on my configuration. Given that if I mess up the configuration, my system will likely crash, it is important to me to have this set up correctly!

  Read the article

• No Telnet login prompt when used over SSH tunnel

  - by SCO

  Hi there ! I have a device, let's call it d1, runnning a lightweight Linux. This device is NATed by my internet box/router, hence not reachable from the Internet. That device runs a telnet daemon on it, and only has root as user (no pwd). Its ip address is 192.168.0.126 on the private network. From the private network (let's say 192.168.0.x), I can do: telnet 192.168.0.126 Where 192.168.0.126 is the IP address in the private network. This works correctly. However, to allow administration, I'd need to access that device from outside of that private network. Hence, I created an SSH tunnel like this on d1 : ssh -R 4455:localhost:23 ussh@s1 s1 is a server somewhere in the private network (but this is for testing purposes only, it will endup somewhere in the Internet), running a standard Linux distro and on which I created a user called 'ussh'. s1 IP address is 192.168.0.48. When I 'telnet' with the following, let's say from c1, 192.168.0.19 : telnet -l root s1 4455 I get : Trying 192.168.0.48... Connected to 192.168.0.48. Escape character is '^]'. Connection closed by foreign host . The connection is closed after roughly 30 seconds, and I didn't log. I tried without the -l switch, without any success. I tried to 'telnet' with IP addresses instead of names to avoid reverse DNS issues (although I added to d1 /etc/hosts a line refering to s1 IP/name, just in case), no success. I tried on another port than 4455, no success. I gathered Wireshark logs from s1. I can see : s1 sends SSH data to c1, c1 ACK s1 performs an AAAA DNS request for c1, gets only the Authoritave nameservers. s1 performs an A DNS request, then gets c1's IP address s1 sends a SYN packet to c1, c1 replies with a RST/ACK s1 sends a SYN to c1, C1 RST/ACK (?) After 0.8 seconds, c1 sends a SYN to s1, s1 SYN/ACK and then c1 ACK s1 sends SSH content to d1, d1 sends an ACK back to s1 s1 retries AAAA and A DNS requests After 5 seconds, s1 retries a SYN to c1, once again it is RST/ACKed by c1. This is repeated 3 more times. The last five packets : d1 sends SSH content to s1, s1 sends ACK and FIN/ACK to c1, c1 replies with FIN/ACK, s1 sends ACK to c1. The connection seems to be closed by the telnet daemon after 22 seconds. AFAIK, there is no way to decode the SSH stream, so I'm really stuck here ... Any ideas ? Thank you !

  Read the article

• Cisco ASA SSL VPN options?

  - by JonH

  Disclaimer: I am not a network admin so I may be wrong here but I thought asking here would help. I'm a developer mainly on the .net framework as well as helping get a mobile intranet app working. Because this app is only allowed to be used on our network I can easily run this app on our wireless network connection within our building. All is fine and dandy but we'd also like to be able to run this mobile app at say a customer plant using VPN software. I thought surely this could be easy as we exclusively use Samsung s4 phones so I thought I'd download Cisco's Samsung any connect software to allow us to VPN...its right on the play store. Sure enough it doesn't work. I mention it to our network admin who says not possible since we have old technology that doesn't support SSL. He mentions we'd have to upgrade all of our hardware, the firewall, etc. to get this to work. We really need VPN on our phones not only for this app but other internal apps, etc. He did mention the following: We can’t upgrade the software on our ASA, because we don’t have enough memory for the new version.  (the asa is very old).  We can’t add more memory, so we would have to get a new firewall, which I have been told I cannot do. In addition he also mentioned: The Samsung AnyConnect client uses SSL to connect.  With the current (old) version of software that our firewall is running, the SSL connections are unreliable.  We need different hardware in order to upgrade our firewall, which we are unable to attain at this time.  This is the same reason that Windows 8 clients are not able to connect. I am curious hence me asking. vpns seem to be fairly simple to setup. What other options do I have aside from making this a public site or web service that consumes this data over the internet as this is a complete no no. What can we do to make this work without that much effort or cost.

  Read the article

• Problem connecting to SSH in office network

  - by Jeune

  I have trouble connecting via SSH to a server whenever I am in the office. I get as far as being prompted for my password and then after that there's a long wait which always ends in a Write failed: Broken pipe This is only for connecting via SSH. I use svn to commit files to a repository hosted on the same server and there are no hitches. Furthermore, this only happens in our office. When I go the university or whenever I am at home or at the coffee shop I am able to connect seamlessly. There are no firewalls in our office. It's just a basic wireless router connected to a modem setup. It's the same setup I have at home and I guess the same setup in the coffee shop. What are the causes for a broken pipe and why does this phenomenon only happen when I try connect via SSH and not when I work with svn on the same server? Updated: Some debug logs after authentication: debug3: packet_send2: adding 48 (len 64 padlen 16 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env SSH_AGENT_PID debug3: Ignored env TERM debug3: Ignored env SHELL debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env GTK_MODULES debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env LIBGL_DRIVERS_PATH debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env DEFAULTS_PATH debug3: Ignored env SESSION_MANAGER debug3: Ignored env USERNAME debug3: Ignored env XDG_CONFIG_DIRS debug3: Ignored env DESKTOP_SESSION debug3: Ignored env LIBGL_ALWAYS_INDIRECT debug3: Ignored env PATH debug3: Ignored env PWD debug3: Ignored env GDM_KEYBOARD_LAYOUT debug1: Sending env LANG = en_PH.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env GNOME_KEYRING_PID debug3: Ignored env MANDATORY_PATH debug3: Ignored env GDM_LANG debug3: Ignored env GDMSESSION debug3: Ignored env SHLVL debug3: Ignored env HOME debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env XDG_DATA_DIRS debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env DISPLAY debug3: Ignored env LESSCLOSE debug3: Ignored env XAUTHORITY debug3: Ignored env COLORTERM debug3: Ignored env OLDPWD debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 UPDATE 2011-14-07: I am able to connect to the server via SSH now. I didn't do anything but that's because there is no one in the office but me! Having said that, is it possible that it has something to do with the number of sessions an SSH server can handle? UPDATE 2011-14-07: I try to login via SSH through Putty on another machine running windows together with my current SSH session in Ubuntu and now it seems my SSH session in Ubuntu has been dropped. I can't type into the terminal. Is Putty the culprit now?

  Read the article

• Network use of Gaming PC

  - by Matthew Patrick Cashatt

  Background After YEARS of waiting, I built the custom gaming PC of my dreams: Intel i7 - 975 Extreme Edition 3.3ghz (overclocked to 4.0) ATI Radeon 5970 2gb Corsair 256 gb SSD Drive 2 TB Sata II 3.0 7200rpm data drive 12 GB Kingston Hyper-X (1600mhz) DDR3 Windows 7 Ultra 64 bit And so on. . . Problem I hooked this beast up to our home theater and settled in for a great gaming season only to realize a couple of drawbacks: It's hard to accurately wax bad guys using a keyboard in your lap whilst reclined on your couch (and using a wireless keyboard). It's hard to read the text on the screen (i.e. menus, etc). I find that a 1:1 ratio (screen diagonal inch to inch away from screen) is optimum, but using the home theater, it's more like 1:3 which has me squinting unless I sit on the coffee table. The wife always seems to want the TV the same time I do and, unfortunately "Real Housewives of Beverly Hills" and Battlefield BC don't mix. I am losing the battle in the home theater room, but the PC has to stay there (long story). So, this leaves me with the option of playing in my home office which is about 30 feet away from the home theater. I am a software developer so I have a pretty decent set up in my office--multiple 1080p monitors, HP Envy 17 which can run games like Crysis in 720p with out stammering too much. Also, I can game very comfortably at my desk in the office. Still, even though the set up in my office can run games well enough, I don't want to regress to that when I have worked YEARS for an awesome gaming PC that can run everything on ultra high settings. My Question What are my options for running my games on the beastly desktop in the Home Theater, but physically playing in my office about 30 feet away? A really long HDMI cable? LAN/RDC? Details that May Help We have an open crawlspace so running cable from HT room to office is no problem. I already have networked the house with a LAN Any help is GREATLY appreciated. Thanks, Matt

  Read the article

• No login prompt displayed after updating Ubuntu 10.04, broken gdm

  - by cliff

  So here's what happens: I updated my system the other day, was prompted for a reboot for the update to complete but was in the middle of working so I delayed it until after I was done. I reboot and it's broken :(. It appears to boot normally, with the following exceptions: The purple Ubuntu load screen no longer displays (though it did for the first couple of times I tried to get in). I hear the login prompt sound, but no login prompt appears. Nor is it simply "invisible" - pressing enter, typing my password, and pressing enter again do nothing. Normally my Bluetooth mouse is functional at this point, but it is not. GRUB displays recovery options for my current kernel, and for an older one (2.6.32-24). Trying to boot into .32-24 gives me an error saying "udevadm can't do something while udev is not configured". So I try solutions listed here: http://superuser.com/questions/195786/ubuntu-update-went-wrong-pc-doesnt-boot-how-can-i-repair-it Nothing I tried seemed to work, and after further Googling my hunch is that it's a problem with gdm. Please correct me if I'm wrong, I don't know all that much about how Linux/Ubuntu systems work just yet. Things I'm able to do: Boot to a live CD Ctrl-Alt-F2 after that login sound plays brings me to a console login, which I can successfully do (it's how I tried the solutions above). This works only under the current kernel. A hack I'd be willing to explore is removing the login prompt from the console, but I'd prefer to "simply" fix what's wrong. Like that guy, I need to repair the system rather than reinstall. System: Dell Inspiron 1525 Core 2 Duo Proprietary Driver for Broadcom 43xx wireless Dual-boot with Windows 7 (which is how I'm posting this, unfortunately I only have this machine and any experimenting requires constant reboots into Windows/brokenbuntu) Last package installed was Moonlight, but it appeared to install properly. Kernel: 2.6.32-25 Edit: After working with Karl's suggestions, it seems that the problem is with gdm. Error exit status 245 when attempting to sudo apt-get install --reinstall gdm, also an error processing gdm when running sudo apt-get -f install. How do I reinstall or repair gdm so that I can get back into my machine?

  Read the article

• Netcat file transfer problem

  - by thepurplepixel

  I have two custom scripts I just wrote to facilitate transferring files between my VPS and my home server. They are both written in bash (short & sweet): To send: #!/bin/bash SENDFILE=$1 PORT=$2 HOST='<my house>' HOSTIP=`host $HOST | grep "has address" | cut --delimiter=" " -f 4` echo Transferring file \"$SENDFILE\" to $HOST \($HOSTIP\). tar -c "$SENDFILE" | pv -c -N tar -i 0.5 | lzma -z -c -6 | pv -c -N lzma -i 0.5 | nc -q 1 $HOSTIP $PORT echo Done. To receive: #!/bin/bash SERVER='<myserver>' SERVERIP=`host $SERVER | grep "has address" | cut --delimiter=" " -f 4` PORT=$1 echo Receiving file from $SERVER \($SERVERIP\) on port $PORT. nc -l $PORT | pv -c -N netcat -i 0.5 | lzma -d -c | pv -c -N lzma -i 0.5 | tar -xf - echo Done. The problem is that, for a very quick second, I see something flash along the lines of "Connection Refused" (before pv overwrites it), and no file is ever transferred. The port is forwarded through my router, and nmap confirms it: ~$ sudo nmap -sU -PN -p55515 -v <my house> Starting Nmap 5.00 ( http://nmap.org ) at 2010-04-21 18:10 EDT NSE: Loaded 0 scripts for scanning. Initiating Parallel DNS resolution of 1 host. at 18:10 Completed Parallel DNS resolution of 1 host. at 18:10, 0.00s elapsed Initiating UDP Scan at 18:10 Scanning 74.13.25.94 [1 port] Completed UDP Scan at 18:10, 2.02s elapsed (1 total ports) Host 74.13.25.94 is up. Interesting ports on 74.13.25.94: PORT STATE SERVICE 55515/udp open|filtered unknown Read data files from: /usr/share/nmap Nmap done: 1 IP address (1 host up) scanned in 2.08 seconds Raw packets sent: 2 (56B) | Rcvd: 5 (260B) Also, running netcat normally doesn't work either: squircle@summit:~$ netcat <my house> 55515 <my house> [<my IP>] 55515 (?) : Connection refused Both boxes are Ubuntu Karmic (9.10). The receiver has no firewall, and outbound traffic on that port is allowed on the sender. I have no idea what to troubleshoot next. Any ideas? P.S.: Feel free to move this to SO/SF if you feel it would fit better there.

  Read the article

• I am unable to connect to my netbook from any machine on my network until the netbook has pinged it

  - by Samuel Husky

  I have a rather strange issue with my netbook on my local network. When trying to connect to it in any way from a remote system it does not appear to find it. However if I get the netbook to ping the machine trying to connect it mystically appears to work. Below is the ping test from my main PC to the netbook. C:\Users\Sam>ping 192.168.8.102 Pinging 192.168.8.102 with 32 bytes of data: Reply from 192.168.8.100: Destination host unreachable. Reply from 192.168.8.100: Destination host unreachable. Reply from 192.168.8.100: Destination host unreachable. Reply from 192.168.8.100: Destination host unreachable. Ping statistics for 192.168.8.102: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Now a ping from the netbook to my main PC sam@malamute ~ $ ping 192.168.8.100 PING 192.168.8.100 (192.168.8.100) 56(84) bytes of data. 64 bytes from 192.168.8.100: icmp_req=1 ttl=128 time=2.46 ms 64 bytes from 192.168.8.100: icmp_req=2 ttl=128 time=0.835 ms 64 bytes from 192.168.8.100: icmp_req=3 ttl=128 time=1.60 ms 64 bytes from 192.168.8.100: icmp_req=4 ttl=128 time=1.32 ms 64 bytes from 192.168.8.100: icmp_req=5 ttl=128 time=1.34 ms ^C --- 192.168.8.100 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 0.835/1.514/2.460/0.536 ms And the same ping again from the main PC after the netbook has made a connection to it C:\Users\Sam>ping 192.168.8.102 Pinging 192.168.8.102 with 32 bytes of data: Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Ping statistics for 192.168.8.102: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 1ms, Average = 1ms The netbook is running Gentoo and is currently connected via wireless. My main PC is running Windows 7 however I get the same result no matter what PC I use on this network. Please see this example from a CentOS machine on the same network [root@tiger ~]# ping 192.168.8.102 PING 192.168.8.102 (192.168.8.102) 56(84) bytes of data. From 192.168.8.200 icmp_seq=2 Destination Host Unreachable From 192.168.8.200 icmp_seq=3 Destination Host Unreachable From 192.168.8.200 icmp_seq=4 Destination Host Unreachable --- 192.168.8.102 ping statistics --- 6 packets transmitted, 0 received, +3 errors, 100% packet loss, time 5000ms , pipe 3 If you need any more information or require logs or config files please let me know and any assistance is greatly appreciated. Additional info: No responses on TCP dump from the netbook. Same result when booting into Ubuntu from a USB key. No issue when using a wired Ethernet connection.

  Read the article

• PCI-DSS compliance for business with only swipe terminals [migrated]

  - by rowatt

  I support the IT infrastructure for a small retail business which is now required to undergo a PCI-DSS assessment. The payment service and terminal provider (Streamline) has asked that we use Trustwave to do the PCI-DSS certification. The problem I face is that if I answer all questions and follow Trustwave's requirements to the letter, we will have to invest significantly in networking equipment to segment LANs and /or do internal vulnerability scanning, while at the same time Streamline assures me that the terminals we have (Verifone VX670-B and MagIC3 X-8) are secure, don't store any credit card information and are PCI-DSS compliant so by implication we don't need to take any action to ensure their network security. I'm looking for any suggestions as to how we can most easily meet the networking requirements for PCI-DSS. Some background on our current network setup: single wired LAN, also with WiFi turned on (though if this creates any PCI-DSS complexities we can turn it off). single Netgear ADSL router. This is the only firewall we have in place, and the firewall is out the box configuration (i.e. no DMZ, SNMP etc). Passwords have been changed though :-) a few windows PCs and 2 windows based tills, none of which ever see any credit card information at all. two swipe terminals. Until a few months ago (before we were told we had to be PCI-DSS certified) these terminals did auth/capture over the phone. Streamline suggested we moved to their IP Broadband service, which instead uses an SSL encrypted channel over the internet to do auth/capture, so we now use that service. We don't do any ecommerce or receive payments over the internet. All transactions are either cardholder present, or MOTO with details given over phone and typed direct into terminal. We're based in the UK. As I currently understand it we have three options in order to get PCI-DSS certification. segment our network so the POS terminals are isolated from all PCs, and set up internal vulnerability scanning on that network. don't segment the network, and have to do more internal scanning and have more onerous management of PCs than I think we need (for example, though the tills are Windows based, they are fully managed so I have no control over software update policies, anti virus etc). All PCs have anti virus (MSE) and windows updates automatically applied, but we don't have any centralised go back to auth/capture over phone lines. I can't imagine we are the first merchant to be in this situation. I'm looking for any recommendations a simple, cost effective way to be PCI-DSS compliant - either by doing 1 or 2 above with (hopefully) simple and inexpensive equipment/software, or any other ways if there's a better way to do this. Or... should we just go back to the digital stone age and do auth/capture over the phone, which means we don't need to do anything on our network to be PCI-DSS certified?

  Read the article

• iptables management tools for large scale environment

  - by womble

  The environment I'm operating in is a large-scale web hosting operation (several hundred servers under management, almost-all-public addressing, etc -- so anything that talks about managing ADSL links is unlikely to work well), and we're looking for something that will be comfortable managing both the core ruleset (around 12,000 entries in iptables at current count) plus the host-based rulesets we manage for customers. Our core router ruleset changes a few times a day, and the host-based rulesets would change maybe 50 times a month (across all the servers, so maybe one change per five servers per month). We're currently using filtergen (which is balls in general, and super-balls at our scale of operation), and I've used shorewall in the past at other jobs (which would be preferable to filtergen, but I figure there's got to be something out there that's better than that). The "musts" we've come up with for any replacement system are: Must generate a ruleset fairly quickly (a filtergen run on our ruleset takes 15-20 minutes; this is just insane) -- this is related to the next point: Must generate an iptables-restore style file and load that in one hit, not call iptables for every rule insert Must not take down the firewall for an extended period while the ruleset reloads (again, this is a consequence of the above point) Must support IPv6 (we aren't deploying anything new that isn't IPv6 compatible) Must be DFSG-free Must use plain-text configuration files (as we run everything through revision control, and using standard Unix text-manipulation tools are our SOP) Must support both RedHat and Debian (packaged preferred, but at the very least mustn't be overtly hostile to either distro's standards) Must support the ability to run arbitrary iptables commands to support features that aren't part of the system's "native language" Anything that doesn't meet all these criteria will not be considered. The following are our "nice to haves": Should support config file "fragments" (that is, you can drop a pile of files in a directory and say to the firewall "include everything in this directory in the ruleset"; we use configuration management extensively and would like to use this feature to provide service-specific rules automatically) Should support raw tables Should allow you to specify particular ICMP in both incoming packets and REJECT rules Should gracefully support hostnames that resolve to more than one IP address (we've been caught by this one a few times with filtergen; it's a rather royal pain in the butt) The more optional/weird iptables features that the tool supports (either natively or via existing or easily-writable plugins) the better. We use strange features of iptables now and then, and the more of those that "just work", the better for everyone.

  Read the article

• how does openvpn decide which interface to get IP addrs from

  - by bkrupa

  Using ubuntu 10.04 on both ends. We have a client and server machine on the SAME network attempting to make a vpn connection. We use the config files from here and made minimal changes. The server and client start and seem to connect without any trouble. The server looks like: Wed Feb 23 22:13:22 2011 MULTI: multi_create_instance called Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Re-using SSL/TLS context Wed Feb 23 22:13:22 2011 192.168.1.55:47166 LZO compression initialized Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Local Options hash (VER=V4): 'f7df56b8' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Expected Remote Options hash (VER=V4): 'd79ca330' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 TLS: Initial packet from 192.168.1.55:47166, sid=69112e42 5458135b *...* Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Feb 23 22:13:22 2011 192.168.1.55:47166 [client1] Peer Connection Initiated with 192.168.1.55:47166 On the client side the connection looks like: Wed Feb 23 22:20:07 2011 [server] Peer Connection Initiated with [AF_INET]192.168.1.41:1194 Wed Feb 23 22:20:10 2011 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Wed Feb 23 22:20:10 2011 PUSH: Received control message: 'PUSH_REPLY,route-gateway 10.8.0.4,ping 10,ping-restart 120,ifconfig 10.8.0.50 255.255.255.0' ... Wed Feb 23 22:20:10 2011 /sbin/ifconfig tap0 10.8.0.50 netmask 255.255.255.0 mtu 1500 broadcast 10.8.0.255 Wed Feb 23 22:20:10 2011 Initialization Sequence Completed The openvpn server has been configured to assign ip addresses in the range 10.8.0.* and the client has been given 10.8.0.50. When I run the following nmap from the client: Starting Nmap 5.00 ( http://nmap.org ) at 2011-02-23 22:04 EST Host 10.8.0.50 is up (0.00047s latency). Nmap done: 256 IP addresses (1 host up) scanned in 30.34 seconds Host 192.168.1.1 is up (0.0025s latency). Host 192.168.1.18 is up (0.074s latency). Host 192.168.1.41 is up (0.0024s latency). Host 192.168.1.55 is up (0.00018s latency). Nmap done: 256 IP addresses (4 hosts up) scanned in 6.33 seconds If I run an nmap from the server on 10.8.0.* I get nothing. If the client has two interfaces (wireless and tap device) when you look for a certain ip address, how does it decide which interface to connect on?

  Read the article

• XP shared folders not accessible after BIOS changed

  - by stijn

  Here's what worked for over a year: PC A runs Windows 7, PC B runs Windows XP. Both are on the same subnet behind a router. A uses user account X, but logs in to PC B using the Administrator account. PC B is a Dell Precision 470. A known problem with these is that sometimes when plugging in their power cable they somehow loses all BIOS settings. This happened yesterday. After this happens Windows won't boot, because the default BIOS setting is 'RAID ON' while there is no RAID configured. No problem though, changing the BIOS settings to 'RAID OFF' makes it boot without problems. Note that in the meantime, nothing config-related was changed on machine A. It wasn't even on. Indeed after doing this, everything is fine. Everything includes all normal operations, remote desktop from PC A to PC B, running Synergy between A and B, accessing shared folders from B to A. But accessing the shared folders on B from A does not work any more. I tried pretty much everything I found via Google (fiddling with policies/registry kes/...) but no avail. > ping -a 192.168.2.2 Pinging A [192.168.2.2] with 32 bytes of data: Reply from 192.168.2.2: bytes=32 time<1ms TTL=128 > net view \\192.168.2.2 System error 5 has occurred. Access is denied. > net use /persistent:no K: \\A\myshare /user:A\USERNAME PASSWORD > net use /persistent:no K: \\192.168.2.2\myshare /user:192.168.2.2\USERNAME PASSWORD > net use /persistent:no K: \\192.168.2.2\myshare /user:USERNAME PASSWORD System error 86 has occurred. The specified network password is not correct. A solution to this would be great: I haven't been able to do any work since yesterday ;] update after taking the hard drive out of B and putting it in another Precision 470 with almost exactly the same hardware (at first sight, only the video card differs) the shared folders work.. Putting the disk back into A, same problem remains. Why does this depend on hardware, and more important, on which hardware?

  Read the article

• UPS vs Solar Power in case of power failure for a server [on hold]

  - by Zen 8000k

  I am looking for a low power, low end pc able to run 24/7 without overheating and a way to support it in case of power failure. Power failures can be up to 72 hours. The pc dosen't need a monitor or keyboard. A modem must also be protected in case of power failure. When i say low end, i don't mean crap. The cpu needs to be x86 and have at least 1k cpu in this chart: http://www.cpubenchmark.net/index.php What's the best way to do this? EDIT: more info. I need to run a home server. The server will perform light tasks mainly. A x86 cpu sadly is the only route for my use. I want to be able to run the server and the router/modem in case of power failure. Now, regarding how long the power will fail: 1) 1 hours is OK for most situations. (say 90%) 2) 3 hours is OK (say 98%) 3) 6 hours is more thank OK. (say 99.5%) 4) On extreme cases the power might fail days. I believe this is very unlikely to happen. More is great but, really, how ofter power will fail more than 3 hours? I believe once every year at best. Well, that's too rare to care about. Given the above, I am looking for a cost effective way to archive 1-3 hour power or 6 hour if possible. Solutions: You guys give me great ideas. 1) Power generator: no good as power will fail for 10 seconds before returning. Also I read online, "clean" power generators cost 1.5k+, so it's out of budged. Non clean generator might damage electronics, right? 2) Solar power: i don't know for sure about this. Sounds like a great idea, too good to be true, honestly. For only 200$ i get 100+w? What are the drawbacks here? 3) UPS: This seems to be the best. The only problem is the cost. Cost < 200$ = great 400$ = budged limit

  Read the article

• DNS NS and domain clarification

  - by thejartender

  I am really trying to get my home web server up and I don't seem to be succeeding. My web server withing my host system is running my web application and is viewable at the current isp ip 88.89.190.171 over WAN indicating that the webapp is fine and that router ports are forwarded. I have set up a DNS on this system with a single name server in the network and I manage to ping it with ping ns.thejarbar.org I have registered this private name server at my current hosting provider. My domain (thejarbar.org) is obviously registered and I have pointed it to my name server. My question here is if it is simply a matter of waiting on propagation for me to be able to ping my domain? Another way of asking this is if the fact that my name server is discoverable indicates that I have set it up correctly to be used? I have tested with dig and dig -x on my host and have A records for the name server. The server is not the Authorative server so I am concerned that this may be the reason why my site is not discoverable. Is there anything else I may need to so still? I only have one ns. currently, but should this succeed I will be purchasing a more stable secondary system to host my development applications. This is my best chance at getting work (freelance development) due to illness) and this I feel is the last step I need to succeed. Please note that this is temporarily a home server and I will most likely be using it as part of a professional setup very soon I will likely have to repeat this question therefore in a prefessional context in a few weeks as nothing will be different other than the fact that I am going to have a server running elsewhere. I am using bind9 and Ubuntu 12.10 and my records are: $TTL 3D @ IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); thejarbar.org. IN A 10.0.0.42 @ IN NS ns.thejarbar,org. yuccalaptop IN A 10.0.0.19 ns IN A 10.0.0.42 gw IN A 10.0.0.138 www IN CNAME thejarbar.org. $TTL 3D 0.0.10.in-addr.arpa. IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); 0.0.10.in-addr.arpa. IN NS ns.thejarbar.org. 42 IN PTR thejarbar.org. 19 IN PTR yuccalaptop.thejarbar.org. 138 IN PTR gw.thejarbar.org. My localhost IP is 10.0.0.42 I wish for this to be my host and name server.

  Read the article

• How to install missing Sound Drivers in Ubuntu?

  - by Sakamoto Kazuma

  I seem to be missing drivers for my Gateway laptop MA7. I have looked in System-Admin-Hardware Drivers, but it does not show up in there.There are also no devices listed in Sound-Hardware. I'm guessing at this point that I don't have the driver installed. However, I get the following output: admin@machine001:~$ cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xd8240000 irq 22 admin@machine001:~$ And my lspci shows: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14) 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) 04:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 04:09.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 04:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) I have also checked alsamixer, and nothing is muted. No headphones plugged into headphone jack either. So the question now is, how do I get sound to work on my laptop? It doesn't work for any application.

  Read the article

• Why many applications close after opening a document or doing a specific actions?

  - by Mohsen Farjami

  I have some encrypted pdf files that have no problem and in my last windows, I could open them easily with Adobe Reader 9.2 and other pdf readers. But now, I can only open non-encrypted pdf files and one encrypted file with Adobe Reader. every time I open almost any encrypted pdf, it closes itself. Also, when I try to search a folder for a keyword with Foxit Reader, once it closed. This is not related to Adobe Reader, because I have the same problem with Word 2007. When I open a document, sometimes it closes instantly and sometimes it closes after a few seconds and sometimes it is stable. My windows is Fresh. I have installed it a few days ago. I have ESET Smart Security 5.2 and I have updated it today. OS: XP Pro SP3, RAM: 3 GB, CPU: 2 GHZ, HDD: 320 GB My installed applications: Adobe AIR Adobe Flash Player 11 ActiveX Adobe Flash Player 11 Plugin Adobe Photoshop CS4 Adobe Reader 9.2 Atheros Wireless LAN Client Adapter Babylon Bluetooth Stack for Windows by Toshiba CCleaner Conexant HD Audio Dell Touchpad ESET Smart Security Farsi (101) Custom Foxit Reader Framing Studio 3.27 Google Chrome Hard Disk Sentinel PRO HDAUDIO Soft Data Fax Modem with SmartCP Intel(R) Graphics Media Accelerator Driver IrfanView (remove only) Java(TM) 6 Update 18 K-Lite Mega Codec Pack 8.8.0 Microsoft .NET Framework 2.0 Service Pack 1 Microsoft .NET Framework 3.0 Service Pack 1 Microsoft .NET Framework 3.5 Microsoft Data Access Components KB870669 Microsoft Office 2007 Primary Interop Assemblies Microsoft Office Enterprise 2007 Microsoft User-Mode Driver Framework Feature Pack 1.0.0 (Pre-Release 5348) Mozilla Firefox 7.0.1 (x86 en-US) Notepad++ Office Tab FreeEdition 8.50 ParsQuran PerfectDisk 12 Professional Registry First Aid RICOH R5C83x/84x Flash Media Controller Driver Ver.3.54.06 Sahar Money Manager 2.5 Stickies 7.1d The KMPlayer (remove only) TurboLaunch 5.1.2 Unlocker 1.9.1 USB Safely Remove 4.2 Virastyar Visual Studio 2005 Tools for Office Second Edition Runtime Winamp Windows Internet Explorer 8 Windows Media Player 11.0.5358.4826 Windows XP Service Pack 3 WinRAR 4.11 (32-bit) WorkPause 1.2 Z Dictionary My startup applications: WorkPause USB Safely Remove TurboLaunch SunJavaUpdateSched Stickies rfagent Persistence ParsQuran Daily Verse ITSecMng IgfxTray HotKeysCmds Hard Disk Sentinel egui disable shift+delete CTFMON.EXE Bluetooth Manager Babylon Client Apoint AdobeCS4ServiceManager Adobe Reader Speed Launcher Adobe ARM What should I do to solve it? If you recommend installing Windows again, what guarantees that it won't happen again?

  Read the article

• Separate zone exceptions for each view in BIND

  - by Stefan M

  Problem: Separate zones by query source network and return different records for LAN clients compared to WAN clients. I've implemented this at home on a small alix router with Bind 9.4. One view called "lan" and one view called "wan". The "lan" view had just the root.hints file and one zone. The "wan" view had many other zones, including a copy of the one zone from the "lan" view, but with different records. Querying domain1.tld from the LAN would give me local records. Querying domain1.tld from the WAN would give me external records. Querying domain2.tld from the LAN would give me the same records as from the WAN as it only existed in the WAN view. Now I'm trying to re-implement this on a larger scale and suddenly my view is unable to query anything outside itself. This is natural according to the bind-users list and they suggest I copy all my views into my LAN view. I'm hoping someone here has a better solution because that means I'll have to copy, and maintain, thousands of zone files in multiple views. This is unfeasible. My configuration at home resembles this. acl lanClients { 192.168.22.0/24; 127.0.0.1; }; view "intranet" { match-clients { lanClients; }; recursion yes; notify no; // Standard zones // zone "." { type hint; file "etc/root.hint"; }; zone "domain1.tld" { type master; file "intranet/domain1.tld"; }; }; view "internet" { match-clients { !localnets; any; }; recursion no; allow-transfer { slaveDNS; }; include "master.zones"; }; Requests from the LAN for domain1.tld give local records, requests from the WAN give remote records. This works fine both at home and in my new Bind 9.7 on a larger scale. The difference is that at home I have somehow managed to make my LAN get remote records from domains in master.zones, without specifying those zones as duplicates in the "intranet" view. Trying this on a larger scale with Bind 9.7 I get no results at all except for the zones specified in the view. What am I missing? I've tried the same configuration for Bind 9.7.

  Read the article

• Why doesn't video run smoothly on my laptop anymore?

  - by andygrunt

  This might be an impossible question to answer remotely but I figure there may be some common causes that people can suggest so I think it's worth asking... Video no longer plays smoothly on my laptop. It used to but not for a while now. For example, playing a video on YouTube is pretty typical: I press play (making sure it's not on HD or even HQ) and the video buffers a little then starts to play. At first it plays fine then the video starts to stutter, turning into a slideshow while the sound continues to play smoothly. If I try playing the same video on my Playstation 3 (which is linked to the same network) it plays smoothly so it can't be the connection. Another example is streaming DivX videos. Again, I wait while it buffers and it starts but very soon, instead of a slideshow, this time the video just plays slowly while the sound continues as normal (instantly getting out of sync). Even if I let the video fully load before pressing play (i.e. it's no longer streaming), it still behaves the same way. I can even let it load 100% then save the file to hard disk and use VLC player to view it, and the same thing happens. I'm using an old laptop running Windows XP. For the past several years it's been connected to the router via Wi-Fi but in the past few days I've changed that to a network cable (like my PS3) but that hasn't helped. Yes, I regularly install various bits and pieces of software but nothing that I can identify as being the cause. So, are there known causes of this sort of behaviour and if so, what can I do to fix it? Thanks. Update to answer a few questions... Laptop Spec' (note: video has played back fine for the majority of time I've had the laptop) Toshiba Satellite 1900-603 (possibly called something else outside the UK) Intel Pentium 4 2.2 Ghz Processor Originally had 512Mb memory but recently doubled that to 1 Gig of memory Graphics: ATI Mobility Radeon 16Mb DDR VRAM Windows XP SP3 (Home edition) Over the years I've done several things to speed it up (disabling indexing etc) and am generally happy with the performance. I also regularly have a clear out of old software (if for no other reason than the laptop only has a 40Gb hard disk) and use CCleaner and Glary Utilities to strip out much of the crap from my system. Also recently (after doubling the memory), I've tried a few new things which might be likely candidates for slowing the video down such as Rocketdock, Jingle keyboard (which gives an old style 'clacky' typewriter sound when I type - love it), SugarSync, Taskbar Shuffle. However, the video doesn't play smoothly even when I try quit all these apps.

  Read the article

• Can't get my Raspberry Pi to keep a static IP

  - by JonnyIrving

  I recently got given a Raspberry Pi and I would like to be able to remote into it using puTTy from my laptop so I don't have to sit next to my tv with a keyboard and mouse to use it. I am able to get a puTTy session going when I know the IP address that my router has given the Pi on each session but it keeps changing on each reboot as I would expect. So I followed a number if instruction to go about configuring the RPi to keep a static IP address. This involved changing the file at '/etc/netwrok/interfaces' which now contains (password removed): auto lo iface lo inet loopback iface eth0 inet static address 192.168.1.82 netmask 255.255.255.0 gateway 192.168.1.254 auto wlan0 allow-hotplug wlan0 iface wlan0 inet dhcp wpa-ssid "BeBoxD304BF" wpa-psk "**********" Despite this however, each time I reboot my RPi it gives me a new dynamic IP address still. I also noticed that in the 'ifconfig' output below that the details of the eth0 doesn't contain IP details for inet addr, Bcast or Mask which have been present in all other examples I have seen online. eth0 Link encap:Ethernet HWaddr b8:27:eb:b5:95:da UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:87:c6:00:33:77 inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:918 errors:0 dropped:0 overruns:0 frame:0 TX packets:277 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 Also I'm not sure if this is relevant but it can't hurt! The file at '/etc/resolv.conf' contains: domain config search config nameserver 192.168.1.254 ..I heard it might mean something on one of the pages I was looking at. I would be very grateful for any help with this. I have tried everything I can think of and would really like to get this working this weekend so I can use it from work.

  Read the article

• MySQL timeout only from office network to remote server, but other connections are fine

  - by Adam

  I've been developing these apps just fine on a local machine as has my co worker. We recently moved our work desks so we're now on a different floor of the building, but we only have one router that we're connected to. Since then, connecting to this one server appears to timeout more often than not. Occasionally I get through, and the loading is instantaneous. Anyhow we have these connections that were tested 1. my computer -> office network -> php pdo -> mysql server A - timeout 2. my computer -> office network -> mysql cli -> mysql server A - timeout 3. my computer -> office network -> mysql cli -> mysql server A - timeout 4. another pc -> office network -> mysql cli -> mysql server A - timeout 5. my computer -> mobile network -> mysql cli -> mysql server A - ok 6. my computer -> office network -> ssh server A -> mysql server A - ok 7. my computer -> office network -> ssh server B -> mysql server A - ok 8. server B web app -> php pdo -> mysql server A - ok 9. my computer -> office network -> php pdo -> mysql server B - ok 10. my computer -> office network -> mysql cli -> mysql server B - ok This has really stumped me.

  Read the article

• Gigabyte GA-Z77X-D3H MB problems

  - by Hans

  I installed a new system last week. I've some issues with it. The system consists of a: Gigabyte GA-Z77X-D3H with F9 BIOS (latest) Intel Core i5 3570K proccesor Sapphire Radeon HD7850 2x 8GB Corsair 1600MHz memory OCZ Vertex 2 120G SSD Connected peripherals : 2 Samsung 940BF (1 via DVI on GFX card, 1 via an Displayport to DVI adapter) 1 Dell U2312HM monitor (displayport) Dell USB Hub (monitor) Wired mouse, wireless keyboard (logitech) Logitch G25 wheel Canon MP800 printer Okay, my issues are the following: if I plug in 1 or more monitor at DisplayPort during boot, most of the time it won't boot properly. I get an empty message screen of UEFI: only the header GIGABYTE DUEL BIOS appears. The system reboots itself, turns on for a few seconds (no video) and then reboots again. Now it starts all over again. This repeats until I remove all displayport monitors. Windows boots, and I can use them when I replug them. The graphics card has been running fine for a few weeks on an older system (intel Q6600). Another issue is; if I plug in my G25 steering wheel, the UEFI BIOS is inaccessible. It either gives the same empty UEFI screen, or the BIOS screen is rendering but crashes half way (so pieces of text and graphics are missing, and it has crashed). If I remove the G25, all is fine. To verify the graphics card is OK and the motherboard is causing these issues, I tried an NVIDIA 8800GT graphics card. This hasn't got Displayport, but it also cannot boot the BIOS with the G25 wheel plugged in. The PC also refuses to go into or out of standby. It just hangs when going into standby, and in other occasions (when it does succesfully do so) get out of standby. Power supply is OCZ StealthXStream 600W. Proccesor is 25 - 30C idle, ~55C stressed (Scythe Mugen 2). I am really puzzled what can be done to resolve this. I am not really waiting for an RMA request (otherwise I will return the MB for another type), because it will likely mean I have to wait very long before I get a replacement. Anyone else with a similar experience on this board/chipset or can help me troubleshoot this?

  Read the article

< Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >