Search Results

Search found 11896 results on 476 pages for 'smart pro'.

Page 278/476 | < Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >

• After installing Windows Phone 8 SDK, Connectify doesn't work

  - by Pratyush Nalam

  Today I installed Windows Phone 8 SDK from the official site. After installing and a couple of restarts (it restarted the PC to enable Hyper-V), I opened Connectify. I use Connectify Hotspot to connect my iPod to the internet as I have an ethernet connection and no wireless router. The problem is that now, Connectify doesn't show WiFi in Share Over. The attached screenshot shows this. Previously, before I installed the SDK, it would show Ethernet and Wi-Fi. I would select WiFi and share my internet. Now, this is completely screwed. EDIT: I found out that the Microsoft Virtual Wi-Fi Miniport Driver has got disabled and I am not able to enable it again. Please advise. Please advise on what to do Hardware: Windows 8 Pro with Media Center, Apple MacBook Pro 9,1 15 inch Mid-2012 (non retina)

  Read the article

• Can you play Halo 2 and Halo 3 on an Xbox360 Arcade?

  - by Jeremy Rudd

  I'm looking at purchasing a Xbox360 because I've wanted to catch up with the Halo trilogy. Does the cheap Arcade edition console support Halo 2 and Halo 3? Would I be able to save my game progress in single player? Would I be able to play online in typical maps? Would I be able to play games using the DVD drive or do I have to download everything? Does the tiny HDD hurt even if I don't download any games, trailers or music? Are there any other differences in comparison to the Xbox360 Pro? I have a regular TV that uses the composite cable, so I don't need the HDTV support in the Pro edition.

  Read the article

• windows 7 wireless knocks off other computers on the network

  - by Sean

  I am trying to fix a wireless network issue. When a new windows 7 machine (we have 2 in the house) we have problems with any other windows xp machines connecting to the wireless network. I am using a linksys WRT110 running Firmware Version: 1.0.04 (which is not the latest firmware its Ver.1.0.07 but the router would not use the bin update file). I have tried a ton of variations in setting for the wireless network, changed the channel, the security level (none, wep wpa, wpa2), network type (g,bg mixed). I have also read some stuff about homegroup settings for windows 7 but have not seen any differences that make a difference. Basically windows 7 does not like to connect to our network but when I manage to get it to work the windows xp pro machines get kicked off. The windows xp pro machines are a few years old but both windows 7 machines are less than 6 months old.

  Read the article

• C String literals: Where do they go?

  - by Chris Cooper

  I have read a lot of posts about "string literals" on SO, most of which have been about best-practices, or where the literal is NOT located in memory. I am interested in where the string DOES get allocated/stored, etc. I did find one intriguing answer here, saying: Defining a string inline actually embeds the data in the program itself and cannot be changed (some compilers allow this by a smart trick, don't bother). but, it had to do with C++, not to mention that it says not to bother. I am bothering. =D So my question is, again, where and how is my string literal kept? Why should I not try to alter it? Does the implementation vary by platform? Does anyone care to elaborate on the "smart trick?" Thanks for any explanations.

  Read the article

• Joining H264 *without* re-encoding

  - by jdmuys

  Hi, I have two halves of a single show in two .MP4 files, encoded in H264. I would like to join them without re-encoding. Is this possible? I managed to create a joined video as a Quicktime file (.mov) using Quicktime Pro, but then Quicktime Pro will not convert it back to .MP4 without re-encoding. This may be because looking inside the .mov file, the two H264 videos are in there still separated as individual "objects". I am also struggling with MPEG StreamClip without reaching a real solution. But I may have missed something. Note that I have the same issue with MPEG2 files. I can export them to a .MPEG container or a .TS file for example, but I don't know how to join them without re-encoding. Any suggestion welcome, preferably using Mac software.

  Read the article

• Intgrating windows 2000 server in a windows 2008 domain [on hold]

  - by user199121

  I have a network enviroment where my windows 2000 server is just acting as fileserver for sharing, so all the users has an account there with username, password and a list of access rights. Now i want to keep this server cause i am running from there an application that 20 users access but also i want to add a new Windows 2008 R2 64 bit server as a domain controller. Is this possible ? 1-It is ok to make the new windows 2008 server a domain controller ? 2- I want all the users accounts to be the same in the domain controller so they can still use the same username and password to login into the domain as well into the windows 2000 server that is setup as a Workgroup. 3- Do i need to do something to the windows 2000 sever to still be functional in the environment so it can be accessed by the clients computers? note:My clients computers are windows 2000 pro, xp pro and windows 7 32/64 bit. Thanks in advance

  Read the article

• Processor always at max speed

  - by Pratyush Nalam

  I am running Windows 8 Pro on an Apple MacBook Pro 9,1 Mid 2012 15 inch non retina. It has a Core i7-3720 QM CPU @ 2.6 GHz. For the past few days, I have noticed that it is constantly running at max speed which is 2.59 GHz. Before, it used to run at 1.5 - 1.8 GHz on normal usage. And, the weirder thing is that CPU usage is minimal. Screenshot: So, what is the reason for this? And is it harmful?

  Read the article

• What's the difference between these Asus socket 1155 motherboards?

  - by Johnny W

  I've looked on Asus's website, but they don't make it easy to understand what the differences are, and there's so many models to choose from! It's all spiel, and endless specs. How is anybody supposed to rifle through so much detail in order to make note of minor differences? If anyone already has this knowledge, I'd love to know what the major differences between these Z77 models are: P8Z77-V P8Z77-V DELUXE P8Z77-V LE P8Z77-V LE PLUS P8Z77-V LK P8Z77-V LX P8Z77-V PREMIUM P8Z77-V PRO P8Z77-V PRO/THUNDERBOLT Asus are famous for offering lots of solutions, but if there's no easy way to see the differences, how can you even consider what to buy? Their website does include a Comparison tool, but it's broken: I'm primarily interested in 1, 3, 4, 5 and 6, if that makes the task any easier. I'm sure there are people who have this knowledge. Thanks for any help.

  Read the article

• What could explain my partitions disappearing on a new SSD with Windows 7?

  - by charlesrandall

  So this morning, I had a fresh install of Windows 7 pro, on a new SSD (Patriot TorqX 128gb), which I just put in to a new Dell Studio XPS 9000. Everything was fine. I booted to windows, no problem. I go to work. 8 hours later, I come home, and I'm greeted by my boot screen complaining about no bootable devices. Windows repair from the Windows 7 pro disk says it can't fix the problem. It doesn't see any windows installs. I boot up GParted, and my SSD is completely unallocated. No space used, no partitions. Perhaps this is related to allowing windows 7 to create a utility partition when I installed? Only thing I can think of. Is there some kind of known hardware issue that can result in an SSD completely wiping itself?

  Read the article

• Windows XP Disc: corrupt or not corrupt?

  - by Wesley

  Hi all, I just finished one of my builds and am trying to install Windows XP onto it. Here are the specs beforehand... Intel Pentium 4 Northwood 2.4 GHz (512KB L2, 533MHz FSB) QDI Superb 4 Motherboard 2x 1GB PC3200 DDR RAM Seagate 80GB IDE HDD Bestec 250W PSU 16MB NVIDIA TNT2 Pro Samsung DVD-ROM USB 2.0 PCI Card Generic PCI Modem The issue right now is that when I'm running through the Windows Setup from my XP Pro SP3 disc, partway through the setup says that a random file on the disc is corrupt and the computer needs to be restarted. Every time I tried booting it up, a different file was noted as corrupt. However, I tested the same disc on another computer and the Windows XP disc ran to the end of the setup screen without error. I tried this on another computer and the same thing. What could possibly be happening on this one build to cause it errors during the Windows Setup? Thanks in advance.

  Read the article

• Opinions Required: Custom HTML Markup from PHP with or without tag prefix.

  - by buggedcom

  I've created a class in PHP that allows you to create custom HTML markup. It basically works a bit like FB Markup or EE tags. It works off a tag prefix, so you can add tags like this. <ctag:pagination per_page="20" total="500" page="0" base="http://localhost/page?page={page}" mode="smart" adjecents="5" /> My question is: Is the markup above better than the markup below? I'm asking as I'm considering branching my code to rework the tag matching so you can just generate custom html elements. It would well for a drop in HTML5 replacement service. Match the User Agent for a none HTML5 browser and replace the HTML5 elements with your own replacements. <pagination per_page="20" total="500" page="0" base="http://localhost/page?page={page}" mode="smart" adjecents="5" /> PS, if anybody wants to look at the class I've put a download here.

  Read the article

• Memory upgrade - is the site reliable?

  - by Yuval

  Hi, I have a late-2008 unibody macbook model with 2 GB of ram. I am looking to upgrade to 4 GB of ram. I looked about a month ago at Other World Computing's 4 GB upgrade kit and I remember it being around $80. I looked today, finally getting to buy it and it went up to almost $100. I found another site, memoryupgrade.pro that calls itself "Pro memory upgrade" and it looks legitimate - it sells the memory for around $80 in its own brand. The only thing is, I haven't been able to find any reviews about it, and I'm not sure if it actually is reliable. Does anybody have any experience with this site? Does anybody have any other suggestions for buying macbook memory? I have friends who bought from OWC and were happy, should I just spend the extra $30 (including shipping) and buy from them? Thanks!

  Read the article

• Virtual Machine Performance - More RAM or More Processor?

  - by webworm

  When looking to improve Virtual Machine performance what would be better ... Increasing the available RAM or increasing the processor power? Here is my choice ... Core 2 Duo @ 2.4 GHz with 8 GB RAM and integrated graphics (Mac Book Pro 13") Core i7 @ 2.6 GHz with 4 GB RAM and 512 MB dedicated graphics (Mac Book Pro 15") I plan to run Windows x64 in the VM with SQL Server 2008, Visual Studio 2010, and SharePoint 2010. I am planning to run VMWare Fusion v3. I also didn't know if a dedicated graphics card makes a difference when using a Virtual Machine. Thank you.

  Read the article

• Adding controls dynamically at design time vb.net

  - by chris

  I have been developing some custom smart tags. I am using a DesignerActionMethodItem which gets me to a fired method in code. When I try to hit the controls.Add the control is added but it seems the designer is unaware of it. It is never serialized and it goes away when the form is refreshed in the designer. Any help would be greatly appreciated. I am sort of stuck and google hasn't helped me. Please don't send me anything about smart tags that has nothing to do with adding controls dynamically at design time, I have already read so many looking for this.

  Read the article

• Is it Possible to Increase Display Resolution for OS X Maverick

  - by Michael

  The new OS X Maverick operating system has reduced maximum display resolution from 1920 x 1200 in Mountain Lion to 1680 x 1050, which is a SIZABLE reduction. The difference is obvious when viewing videos or photos. In addition, the colors are less vibrant. Does anyone know a way to change the display resolution for Maverick, thus restoring Mountain Lion resolution (1920 x 1200)...along with color vibrancy. By the way, I am using a 2012 Macbook Pro, with Matte display, which I think makes matters worse. At 1920 x 1200 my Macbook Pro was excellent...but at 1680 x 1050, it is very pedestrian.

  Read the article

• Unable to delete all partitions on flash drive using Windows 7 OS??

  - by irrational John

  Recently I purchased an ADATA C802 8GB flash drive. Since the drive was new I decided to run some of the HD Tune Pro (v4.50) performance tests on it, mostly just for the heck of it. To avoid accidently destroying data HD Tune refuses to write to a drive unless there are no partitions on the drive. If you do attempt to write to a drive with partitions, it posts the message "Writing is disabled. To enable writing please remove all partitions." As you would expect, the ADATA came formatted with a single primary FAT32 partition in the Master Boot Record. But a number of unexpected things happened when I attempted to delete that partition. The first thing I tried was to use the Windows 7 (64-bit) Disk Management tool (diskmgmt.msc) to delete the partition. It would not let me. The context menu choice to delete that volume was not available. Next I opened up a command prompt window with Admin authority and ran diskpart. Diskpart deleted the volume for me. However, when I attempted to run an HD Tune write test on the drive I still got the "Writing is disabled" message. Huh??? So I fired up a utility I have which allows viewing drives at the sector level and verified that the partition table in the Master Boot Record was empty. No partitions. Yet HD Tune still thought there were partitions on the drive? So why was I still getting the "Writing is disabled" message from HD Tune Pro? And why wouldn't the Windows 7 Disk Management tool let me change the partitions on this drive. After doing the above, I plugged the ADATA into my MacBook. I was then able to format it as either a GPT or MBR partitioned drive with no problems. I am not looking for suggestions on how to format this drive. I can do that. What I do not understand and was hoping I might get insight into is why this drive behaves so strangely under Windows 7? And BTW, what's up with HD Tune Pro? BTW, if I plug the drive I formatted on my MacBook back into my Windows 7 64-bit system I still run into road blocks with the Disk Management tool. For example, I cannot delete all the GPT partitions on the ADATA so I can convert it into an MBR drive. I following Microsoft's instructions, the instructions just do not work with this ADATA flash drive. Anyone know what's up with this? It makes no sense to me. Has something changed in Windows 7 (Vista)??

  Read the article

• Installed 4GB memory but Windows XP 32 bit only reporting 2GB?

  - by AnthonyWJones

  I've just taken an existing XP Pro 32 bit system that had only 0.5GB of memory installed and maxed it out to 4GB. The BIOS reports the 4GB ram however when XP is booted and I look at the computer properties only 2GB of RAM is reported. Can anyone explain this? Before we go up any blind allys the /3GB switch is not the answer here, I have no need for a single process to use more the 2GB of memory. I'm wondering if the the 32 bit XP Pro is deliberately limited to 2GB. I seem to remember seeing an excellent table on a Microsoft site listing all the various SKUs of Windows and what each one was limited to. However I can't seem to find that table now.

  Read the article

• Get songs off of Windows iPod and onto a Mac

  - by Justing

  I have been using iTunes on a Dell running Windows XP to sync about 60 gigs of songs with my old school iPod. Well, the Dell's hard drive died the other day, and the only place that I have my music is on the iPod (I do have the CDs, but really don't want to have to re-rip 60 gigs of music). So, now I have a shiny new MacBook Pro. Is there a way to get my songs off of my iPod and onto the MacBook? I googled, and found Senuti. But, I'm leery of accidentally formating the iPod and losing my songs, and I can't tell if it is Snow Leopard compatible yet. Has anyone recently gone through this process? Please provide suggestions for copying songs from an iPod formated to work with Windows onto a MacBook Pro running Snow Leopard. Thanks!

  Read the article

• Installed 4GB memory but Windows XP 32 bit only reporting 2GB?

  - by AnthonyWJones

  I've just taken an existing XP Pro 32 bit system that had only 0.5GB of memory installed and maxed it out to 4GB. The BIOS reports the 4GB ram however when XP is booted and I look at the computer properties only 2GB of RAM is reported. Can anyone explain this? Before we go up any blind allys the /3GB switch is not the answer here, I have no need for a single process to use more the 2GB of memory. I'm wondering if the the 32 bit XP Pro is deliberately limited to 2GB. I seem to remember seeing an excellent table on a Microsoft site listing all the various SKUs of Windows and what each one was limited to. However I can't seem to find that table now.

  Read the article

• Cannot Join a Domain on VM

  - by arvind0007

  Hi Guys. I have installed Windows 2003 server R2 on a VM. This VM is running on Windows XP PRO. When i try to make this XP Pro PC join the domain on the VM it tries to locate the server and gives me the following error message " The specified network name is no longer available", despite the fact that i can still see this domain on my network. can anyone help with this please. This is the very first time i am trying connecting a client to a VM server so hope am not doing anything wrong.. thanks

  Read the article

• Port forwarding using a BT Home Hub 2.0 (Supplied to new BT Infinity Customers in the UK)

  - by Jasarien

  I don't usually have trouble with port forwarding, I've been able to do it successfully on a number of different routers, including Linksys, Belkin, Netgear and Apple (Time Capsule / Airport Extreme). So I'm quite confused here. I had been using my Apple Time Capsule as my router for a few years now, with several port mappings all working fine. But it died recently, so I've had to resort to using the BT Home Hub 2.0 that was supplied with my BT Infinity broadband subscription. The forwarding interface for the Home Hub is simplified for the most part, allowing you to select an application or game and assign it to a particular computer on the network which you choose from a list that the Home Hub has 'discovered'. My Mac Pro has a manually assigned static IP 192.168.1.4 and my router is static at 192.168.1. I have chosen SSH from the list of applications and assigned it to my Mac Pro (the only computer in the list currently). The Home Hub also has a feature to keep a DNS service updated, and I have set it to keep my external IP address updated on my hostname. This is how I had it setup in the past with other routers and not had trouble before. I am able to ping my hostname (and external IP) from outside the network and get a response. But when I try to connect using SSH, the connection times out. The Home Hub also has "Firewall settings". The currently selected setting is: Default: Allow all outgoing connections and block all incoming traffic. Games and application sharing is allowed. But I've tried changing it to: Disabled: All traffic is allowed to pass through your BT Home Hub to your devices. Note: you’ll still need to use the games and application sharing feature to make sure that certain applications work properly. And the connection still times out... So frustrating. The OS X firewall on my Mac is disabled, so I don't think that's in the way. I have tried setting the port forwarding manually, instead of relying on the preset "SSH" option (incase it's not using the port I expect). So I set up my own "application" (as the Home Hub calls it) and forwarded external port 22 TCP to internal port 22 TCP to 192.168.1.4 - but that just gives the same result - unable to connect. Next, with the router's firewall disabled and OS X's firewall disabled, I ran the Shields Up test (https://www.grc.com/x/ne.dll?bh0bkyd2) and the result was that all my service ports (0 - 1055) are in 'Stealth' mode. I.e. nothing even exists at my IP as far as any outsider is concerned... Strange. The only thing that seems to work is setting my Mac Pro as the DMZ - which I don't want to do for obvious reasons. Any help with this would be extremely appreciated, thanks.

  Read the article

• Partitioning Software for Windows 7

  - by nunos

  I used to use Patition Magic Pro from Norton to do disk partitioning. Now that I have Windows 7, I have been warned, by the OS itself and later confirmed on the internet, that Partition Magic Pro has compatibility issues with Windows 7. So, I am asking you which software partitioning software do you recommend. It would be great if it was freeware but I know it is hard to find a good parititioning app that's free, so, if you know a good one that's paid, there's no problem and please mention it in your reply. Thanks in advance. P.S. I am aware of "create and format disk partitions feature" of Windows 7, but that's not enough for me. I am using Windows 7 Professional 64 bits.

  Read the article

• Windows 8 - Synaptics driver - Mouse keeps freezing

  - by KickAss

  I have Win-8 Pro installed on my Dell XPS. This has Synaptic PS/2 Port TouchPad. As I upgraded the Laptop from Win7 to Win8 all my factory Mouse software (along with other preinstalled software) was all deleted. So for the mouse, I installed Windows 8/7/XP/Vista 64/32-bit Edition v16.3.15.1. Problem - every few seconds (or minutes at times), the mouse freezes. Windows is still working, it's just the mouse. I have to wait 5-15 seconds before the mouse works again. I thought this was because the Synaptic Driver I am installing is not Win-8 compatible but this is not the case. It seems the mouse freezes when Windows is working, loading or opening new programs/windows. I have the same problem in my other Laptop which has upgraded Win8 pro. This is a Dell Studio. What's causing this?

  Read the article

• How do I import a Flash Catalyst design into Dreamweaver?

  - by garrett

  So I made a banner in Flash Catalyst and published it to swf/air file. Now I can't find a way to get it into Dreamweaver. When I hit "Import SWF" and go to browse for it, it doesn't show up. When I publish it to swf, the file is a Jscript script file. I've been looking for tutorials, but I haven't found one for my issue. Currently I am downloading Flash Pro and hoping I can import the Catalyst design into that, then import the Flash Pro design of it into Dreamweaver. I am not very advanced in Catalyst or Dreamweaver, but I do know my way around a bit, and this is causing me one hell of a headache.

  Read the article

• Multimedia PDF (Audio, Video and Links) That works on Desktop and iOS

  - by Keefer

  We've got a client that wants to have a PDF that has embedded audio, video and links. Using Acrobat Pro 9.x I've been able to embed all three no problem. They all work/playback if I use Acrobat Pro/Acrobat Reader. But don't show up in OS X's Preview at all. They also don't show up in iOS. Links work everywhere, but no multimedia. So I tried creating a similar document via Apple's iBooks Author, then exported as a PDF. Links work, but multimedia doesn't seem to work anywhere. Is there any way to make a PDF that works universally with embedded links and multimedia?

  Read the article

< Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >