Search Results

Search found 1139 results on 46 pages for 'isp'.

Page 28/46 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• Getting around broken DNS

  - by Haedrian

  I have someone who's trying to connect to the internet from a connection where the DNS server seems to be down. They can connect if I give them an ip address, but it can't resolve normal names. I tried getting them to change the DNS used from the internet options (setting it to use Google's) - however that didn't work - apparently the isp captures all dns requests. I also tried with a proxy but that didn't work either. Is there another solution to the problem? This isn't a case of censorship or anything, so there's no need to remain anonymous or whatever - I just need a way of 'forcing' the use of another dns server or routing the internet using something else.

  Read the article

• Netgear genie says my Internet is off, while Windows claims I am connected

  - by Manu

  I'm connected via wifi to my ISP's router/modem. While Windows says that I'm always connected, I keep getting messages from Netgear Genie that I've lost contact to the Internet, and I cannot access webpages until it comes back. There are two other computers in the house, one connected to the router via ethernet, the other via wifi, both seem to have no such problems. I've wondered if Netgear genie itself was the problem, but I am regularly disconnected even if I uninstall it. And I'd rather have it since it accurently tells me if I'm connected or not. Why does windows says I'm online if I can't access any online game, or website ? Is "netgear genie" the problem ? I've removed the connection, recreated it, I've even copied the settings to a usb key from the computer that has wifi access.

  Read the article

• Exim: Change sender address when sending mails out of local network

  - by Esa Varemo

  We have a working exim setup at a site, where users can send and receive mails. We are trying to setup a server to send some warnings and errors using email to an address that is outside the local network. The problem is: The program that sends the mails sends them using the username it runs under and the local hostname of the server. This cause the mails to have a sender of format: [email protected]. Exim sends these mails to the ISP's SMTP server, which rejects the mails as they have an illegal or unverifiable sender (the internal address). I'm thinking I should configure exim to rewrite the sender when: - sender's domain is on the local network - receiver's domain is outside the local network I tried setting some kind of rewriting in the exim config, but did not manage to get it to work. I'd show what I have tried, but I ran out of time on the last visit to the site, and had to revert to the original version losing all the changes I tried.

  Read the article

• Can't ping IPs for devices not part of Windows Domain

  - by GiddyUpHorsey

  I have a home network with a Trendnet wireless router and a Windows Domain. The DNS server is on a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. All machines either have a fixed or DHCP allocated IP on the 192.168.0.* subnet. How do I configure the DNS server or the Windows Domain so that Windows machines can see the iPhones?

  Read the article

• PHP MAMP email stopped sending

  - by Kyle Parisi

  I'm working on a simple registration email. I'm using MAMP (free) with PHP. I was getting emails from my code before. Now I get nothing. Here is a test code that doesn't send the email either. <?php $to = "[email protected]"; $subject = "Hi!"; $body = "Hi,\n\nHow are you?"; if (mail($to, $subject, $body)) { echo("<p>Message successfully sent!</p>"); } else { echo("<p>Message delivery failed...</p>"); } ?> What might have changed? I read that perhaps my ISP blocked sending emails? How do I find out?

  Read the article

• How to connect two subnet with Windows Server?

  - by 9dan

  Hello, I have some work to do in a small office. This office has two separate Internet connections. One is a kind of DSL line and connected through the Internet sharing router (DHCP). One is a leased line with public IP adresses (No DHCP). This leased line provide only 30 IP addresses and the gateway is provided by the ISP. Some workers use private IP provided by the router, some workers use manually setup public IP. There is a Windows 2008 R2 server with two NICs, connected to each lines. I want to connect/merge(?)/bridge(?) two subnet with this server so that users from the different subnet can access each other. How can I accomplish this? Something like, add gateway function to this server and public IP users change the gateway to point this server.. It it possible ? Sorry for my rambling. Thanks in advance.

  Read the article

• Why is my ftp connection timing out?

  - by NEPatriot

  This is the log info: Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (173,201,145,1,199,43) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing The strange thing is that I've set the transfer mode to active... I've called my hosting company support and they're able to connect to this server using my ftp credentials. I've also tried to connect on another machine on my network and have the same issue. Could it be the firewall? My ISP?

  Read the article

• I need a few minutes of dedicated server a week, but not for hosting, just to convert ogg etc

  - by talkingnews

  I'm completely happy with my webhosting, it's just that I need to do one little thing they won't allow, and that's run an instance of Sox to convert about 30 mp3s to ogg files, in various directories, a couple of times a week, to be done automatically in response to the detection of the upload of an mp3. Probably looking at a minute of server time over the whole week. I've had unhelpful suggestions on other forums like "why not leave your home PC on 24 hours a day and then use all your isp bandwidth to do this", which doesn't work for me. I know that I can host files on, say, Amazon S3, but is there something similar for my needs? All it would need to do would be: wget/ftp the mp3 files, convert them to ogg, ftp the files back to my hosting. Of course, all this wouldn't be needed if there was such a thing as a compiled binary of Sox (or any mp3ogg converter) for Centos which I could upload without needing root access, but I've given up asking that one, but always open to suggestions!

  Read the article

• Internet Connection Dying after some time

  - by Rahul

  I'm using BSNL 3G USB Datacard(BSNL is a ISP in India). After connecting to internet, while browsing in browser, the connection is dying. So after disconnecting & connecting back, it works proper for some time & the same problem repeats. But if I'm downloading any movie or some file through uTorrent, the connection is not dying. I'm experiencing this problem in Vista & also in Ubuntu. Help me with this please. Thank you.

  Read the article

• Network? or router? problem

  - by Robert H Mercer

  I have two computers networked through a Netgear WG914 router which is connected to an Ipstar satellite modem via the RG47 LAN connector. The main computer is running Windows 7 Pro 64bit and the secondary computer is running Windows 7 Home Edition 32bit. On occasion there is a loss of internet connection usually on the main computer, often followed by a loss on the secondary comuter. Not, however, always the case. Windows troubleshooter, naturally, is about as much use as a politician in government.......NONE. There appears to be no problem with the ISP bad as it is and often the connection will be remade without any help from me. The difference in the OS's is not of any relevance since I had this problem before I changed over to Windows 7. Not being a nerd when it comes to networking I wonder if anyone has any constructive suggestions.

  Read the article

• Slowness on Exchange 2007 Server (network related we think)

  - by Az

  We are seeing some odd behavior out of our exchange 2007 server. I believe it is network related as during the slowness in response from the exchange server. During these times downloading files to server is fraught with connection resets and extreme slow download speeds that are not affecting other servers right on the same subnet with the same gateway and ISP. We have about 50 users at a time using Outlook 2003 from a terminal server not displaying any other signs of slowness, all network slowness is confirmed trying downloads on the exchange server itself. Checked for virus issues, there are none. Checked for hardware issues, none found I am noticing between 200-400 TCPv4 connections established I am seeing around 100k tcpv4(active) connections according to perfmon are these numbers odd? Has anyone run into anything similar? Our server has a gigbabit NIC linked to a gigabit switch using cat6 so I do not believe it is "physical". Thanks!

  Read the article

• Remote Software Solution that Acts as a Client

  - by Richard

  I am looking for something that I am not sure exists. I have a remote computer that will not allow incoming traffic due to ISP blocking of ports(basically double NAT situation that I am unable to get around). I am wondering if I have a computer acting as a client, is there any solution out there that will allow remote access to the computer. I do have other servers on the net that have static IP's that the computer could initiate a connection with. I am thinking of using Debian Linux, However computer is not built yet so OS is not overly important at this point.

  Read the article

• Why do most routers not include local DNS?

  - by user785194

  I need to change my firewall/router, and I'd prefer something with built-in DNS to resolve queries on the local subnets. I've got a mixed Linux/Windows system, often with only one computer turned on, and I frequently have problems resolving local names. I don't want to keep a Linux box permanently on just for DNS, and I'd prefer to have DNS in my router appliance, which is always on. I search Google for this occasionally but never find anything. You always get the obvious answers - it's not possible, put everything in /etc/hosts, NetBIOS, dedicated box, etc. So what am I missing? Why don't "cheap" routers let you do this? I'm pretty sure that Cisco kit does this. Almost all cheap routers will let you do MAC address reservation, to let them assign static IP addresses for DHCP. So why can't they simply do DNS as well for everything on the local subnets, just passing through remote domains to the ISP?

  Read the article

• How to access an node of an LAN via WAN?

  - by gilzero

  Lets say I have a router that is connected to the Internet. An WAN IP address is given by ISP. It is using PPPoE ADSL, the IP address is not static, every time it connected, assigned a different IP address. There is an web server 192.168.0.100 running in the LAN. I heard something like DMZ + DynDNS can do the job? But not sure what these are and how they work. Any there way(s) to access the local node 192.168.0.100 via WAN, so that I can reach that node even I am not home. Thanks for any advice.

  Read the article

• Troubleshooting a slow database server with no load

  - by user1721724

  I'm getting ready to soft launch my website and I've run into some problems with what I think is being caused by my MySQL database running on Fedora. All websites run fine, just as I'd expect, but any pages that establish a database connection hang until the connection is established, and then bang, the site loads as it should. Ex. My landing page (http://www.thrusong.com) doesn't make a database connection and loads quickly. User profile pages (http://www.thrusong.com/john) make a database connection and load slowly, even though most of the data comes from memcached and the database currently has no load on it. This problem just came up yesterday when my router died and I began using my Pace 2Wire modem with built-in router. Before, my old router was set to handle everything. My ISP says the settings in the modem are correct. Any ideas? Thanks in advance.

  Read the article

• How can I setup a Firewall without NAT?

  - by SRobertJames

  We have 16 IP addresses from our ISP, and are setting up a SonicWall Firewall. I'd like to have the SonicWall do NAT for the LAN, but act as a firewall only (no NAT) for the servers which are using some of the 16 addresses. How do I set this up? If I set the WAN's subnet to include the 16 IPs, the SonicWall won't route the traffic to the LAN interface. Should I set the WAN subnet to only include the ones we are dedicating for NAT, and then keep the others on the LAN? Related point: How can I set multiple IP addresses for a SonicWall LAN interface?

  Read the article

• internet speed and routers are controlled by whom

  - by Ozgun Sunal

  i need to learn two things. each is related to other a bit. The first one is, while our LAN speed is usually 100 Mbps or at gigabit levels(very big compared to WAN speeds), WAN speed for instance DSL connections are far less than this. However, we are able to download huge files at those Mb speeds. Isn't this weird? [my real concern is why WAN speed is lower than LAN speeds] Who controls those routers around the large Internet? (while we, as web clients are connected to Internet, packets travel through those routers to the destination network/s).But, are those routers all inside the ISP network and if not, who controls those large numbers of routers?

  Read the article

• How to configure dnsmasq to forward multiple DNS servers?

  - by xiaoyi

  I'm now using public DNS over VPN to avoid some DNS pollution in China. But this come with a price that I can't take advantage of CDN. Is there a way to configure dnsmasq and let it query both DNS servers, both public one and ISP one, and return the IP with a lower metric? I knew it could be done by using server=/domain/server directive to assign a DNS server for a certain domain, but the problem is there are hundreds of them. So I have to figure out something generic. Thanks in advance.

  Read the article

• can not access dlink 604 set up interface

  - by user36089

  Hello everyone I used dlink-di604 enthernet board as router to share web access. My ISP provides the service base on Ethernet rathern than base on Ethernet pppoe mode. It is manually setup ipv4, subnet mask , DNS, Gateway etc Log in using web user name&password. I use http://192.168.0.2 try to access dlink di604 setup inferface, but failed I call command ipconfig /all Dos shell displayed: Ethernet adapter Local Connection: Physical Address: 00-3c-56-79-19-49 IPv4 address:10.7.8.225 subnet mask: 255.255.255.0 default gate way: 10.7.8.1 DNS servers 10.10.10.10 What is the correct way to access dlink 604 setup interface and set to share web access? Welcome any comment Thanks interdev

  Read the article

• cannot access my own computer through My Network Places

  - by WebMAOhist

  My home Windows XP Pro SP3 machine is DHCP client receiving configurations from ISP. Trying to access in WindowsExplorer -My Network Places - Microsoft Windows Network shows Workgroup with a delay of 3 min and then popups messagebox: Microsoft Windows Network Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The list of servers for this workgroup is not currently available OK I am logged-in as local machine Administrator. The internet is accessible (I am writing this post through it) The Firewall is disabled The "Computer Bowser" and all networking services, I could find, are running Control Panel -- Network Connections -- Properties (of connection) --- Internet Protocol (TCP/IP), btn Properties --- --- tab General, btn "Advanced..." -- tab WINS-- rbtn "Enable NetBIOS over TCP/IP" checked Why cannot I access my own PC (and shares on it) through My Network Places What is the possible problem? How to daignose the problem?

  Read the article

• Installing Drupal: Database configuration problem.

  - by abelenky

  I am trying to install Drupal 6.16 on a clean website. I get through the "Verify Requirements" page easily. On the Database Configuration, I supply all the proper info, but "Save and Continue" returns me back to the same page, with no error message. I am unable to proceed past this point. I've verified my info with the ISP, including a non-local database host (under Advanced Options), and that the database user has full DBA rights. The lack of an error message is particularly frustrating. Do you have any ideas what the problem is, or how to pursue it and resolve it?

  Read the article

• Upgrading from 32 to 64 Bit Windows 7, without losing program installations/games

  - by Fogest

  I recently built a new computer and put the wrong installation of Windows on (32 bit), meaning I cannot use all of my RAM. I would like to upgrade to the 64 bit version, though I already have downloaded many programs and games which would total to around 30 GB give or take. I don't have the kind of data usage with my ISP to re-download this much data again, until next month (total GB will be higher as time goes on). I know there is Windows Easy Transfer, but it is not so much my data itself I'm worried about, it is more having to re-download and install a bunch of games and applications. Is it possible to perform an upgrade from 32 bit to 64 bit without this loss?

  Read the article

• What router settings to use for wireless home network

  - by Question Overflow

  While looking at the setting of my wireless router, I am bewildered by the array of options available. Despite searching on Wikipedia to try to understand the various acronyms, I am still clueless to decide what is the best setting to use although the default works fine. Rather than calling the internet service provider (ISP) to ask them the correct settings, I hope to learn more about the differences between some of the options listed below, so that I would be able to make a more informed decision from now onwards: PPPoE vs PPPoA LLC vs VC-Mux Bridge vs Routed In addition, I would also like to know the significance of the following MTU VPI VCI And whether or when I should manually specify DNS?

  Read the article

• File permission set to 644 and wordpress cannot access them?

  - by Joel

  Hi everyone, I'm having problems with WordPress not be able to access files. When installing certain themes and plugins, it comes up with an error saying that it cannot create the directory. When I try to edit style.css it says that I need to make that file writable. The file permissions were set to 644. It wouldn't work until I changed the settings to 777 or 776. WordPress was installed by our local ISP. Anyone got any ideas? It seems that WordPress has not been setup properly. Is there anyway I can fix this without reinstalling the whole thing? Thanks, Joel

  Read the article

• For how long do I need to store the logs?

  - by mindas

  I will soon be running an internet-based public service which will physically be hosted in the UK on a virtual server. The virtual server is provided by the ISP. I was wondering if there is/are any legal requirement(s) to keep access logs, and if yes - for how long? There is a Wikipedia article that touches this subject but I'm afraid my brain just can't grasp the legislative gibberish. I believe there's EU law and there's UK law; and I do need to comply to both, right? Can somebody explain this in pure layman's terms?

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >