Search Results

Search found 18897 results on 756 pages for 'network connectivity'.

Page 28/756 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• Network Access: I can't access 192.168.1.101 from 192.168.1.102.

  - by takpar

  Hi, I'm running Ubuntu 10.04 on my PC with IP 192.168.1.101. every thing work fine, e.g. my web server is running and I can see http://localhost/ or http://192.168.1.101 properly. But the problem is that I cannot see my PC from my laptop at 192.168.1.102 e.g. at my laptop http://192.168.1.101 gives Connection timed out in browser. or trying to telnet on any port leads to: telnet: Unable to connect to remote host: Connection timed out laptop is running a fresh install of Ubuntu as well and there is no setup for firewall stuff in both computers. PS: Both computers can ping each other well. The router is a cicso linksys wireless ADSL modem. Currently, I can connect to FTP server on the Windows running on 192.168.1.102 from 192.168.1.101 without problem. Theses are commands ran on my PC, 192.168.1.101: ifconfig: adp@adp-desktop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:26:18:e1:8e:cf inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe70::226:18ff:fee1:8ecf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1831935 errors:0 dropped:0 overruns:0 frame:0 TX packets:1493786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1996855925 (1.9 GB) TX bytes:215288238 (215.2 MB) Interrupt:27 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:951742 errors:0 dropped:0 overruns:0 frame:0 TX packets:951742 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:494351095 (494.3 MB) TX bytes:494351095 (494.3 MB) vmnet1 Link encap:Ethernet HWaddr 00:50:46:c0:00:01 inet addr:192.168.91.1 Bcast:192.168.91.255 Mask:255.255.255.0 inet6 addr: fe70::250:56ff:fec0:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vmnet8 Link encap:Ethernet HWaddr 00:50:46:c0:00:08 inet addr:192.168.156.1 Bcast:192.168.156.255 Mask:255.255.255.0 inet6 addr: fe70::250:56ff:fec0:8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:51 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) port 80 is set to 0.0.0.0 well: adp@adp-desktop:~$ netstat -ln | grep 'LISTEN ' tcp 0 0 127.0.0.1:52815 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:4559 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:4369 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:7634 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5269 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5280 0.0.0.0:* LISTEN tcp 0 0 127.0.1.1:7777 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:33601 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5222 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN tcp6 0 0 :::139 :::* LISTEN tcp6 0 0 ::1:631 :::* LISTEN tcp6 0 0 :::445 :::* LISTEN /etc/hosts.deny is empty: adp@adp-desktop:~$ cat /etc/hosts.deny # /etc/hosts.deny: list of hosts that are _not_ allowed to access the system. # See the manual pages hosts_access(5) and hosts_options(5). # # Example: ALL: some.host.name, .some.domain # ALL EXCEPT in.fingerd: other.host.name, .other.domain # # If you're going to protect the portmapper use the name "portmap" for the # daemon name. Remember that you can only use the keyword "ALL" and IP # addresses (NOT host or domain names) for the portmapper, as well as for # rpc.mountd (the NFS mount daemon). See portmap(8) and rpc.mountd(8) # for further information. # # The PARANOID wildcard matches any host whose name does not match its # address. # # You may wish to enable this to ensure any programs that don't # validate looked up hostnames still leave understandable logs. In past # versions of Debian this has been the default. # ALL: PARANOID netstat -l: adp@adp-desktop:~$ netstat -l Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 localhost:52815 *:* LISTEN tcp 0 0 *:hylafax *:* LISTEN tcp 0 0 *:www *:* LISTEN tcp 0 0 *:4369 *:* LISTEN tcp 0 0 localhost:7634 *:* LISTEN tcp 0 0 *:ftp *:* LISTEN tcp 0 0 *:xmpp-server *:* LISTEN tcp 0 0 localhost:ipp *:* LISTEN tcp 0 0 *:smtp *:* LISTEN tcp 0 0 *:5280 *:* LISTEN tcp 0 0 adp-desktop:7777 *:* LISTEN tcp 0 0 *:33601 *:* LISTEN tcp 0 0 *:xmpp-client *:* LISTEN tcp 0 0 localhost:mysql *:* LISTEN tcp6 0 0 [::]:netbios-ssn [::]:* LISTEN tcp6 0 0 localhost:ipp [::]:* LISTEN tcp6 0 0 [::]:microsoft-ds [::]:* LISTEN udp 0 0 *:bootpc *:* udp 0 0 *:mdns *:* udp 0 0 *:47467 *:* udp 0 0 192.168.1.10:netbios-ns *:* udp 0 0 192.168.91.1:netbios-ns *:* udp 0 0 192.168.156.:netbios-ns *:* udp 0 0 *:netbios-ns *:* udp 0 0 192.168.1.1:netbios-dgm *:* udp 0 0 192.168.91.:netbios-dgm *:* udp 0 0 192.168.156:netbios-dgm *:* udp 0 0 *:netbios-dgm *:* raw 0 0 *:icmp *:* 7 netstat -rn: adp@adp-desktop:~$ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.91.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet1 192.168.156.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet8 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 commands on the laptop, 192.168.1.102: ifconfig: root@fakeuser-laptop:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:1c:33:a2:31:15 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:21 eth1 Link encap:Ethernet HWaddr 00:2d:d9:3e:1f:6c inet addr:192.168.1.102 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe70::21d:d9ff:fe3e:1f6c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5681 errors:0 dropped:0 overruns:0 frame:10313 TX packets:6717 errors:6 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4055251 (4.0 MB) TX bytes:779308 (779.3 KB) Interrupt:18 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:206 errors:0 dropped:0 overruns:0 frame:0 TX packets:206 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:15172 (15.1 KB) TX bytes:15172 (15.1 KB) netstat -rn: root@fakeuser-laptop:~# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1

  Read the article

• How do I get wireless to work on a Dell Mini 1018 with Realtek RTL 8188CE Network Adapter?

  - by Laurence Nagel

  My Dell Mini 1018 used to work fine with Ubuntu 12.04 with no problems connecting with the wireless card. Then I made the big mistake of attempting to disable WiFi by right-clicking on the wireless applet and un-checking "Enable Wireless." Since then, I cannot get wireless working again. The wireless applet reports that "wireless is disabled by hardware switch" but there is no hardware switch on this computer. Issuing a rfkill list yields the following: 0: dell-wifi: Wireless LAN Soft blocked: yes Hard block: yes 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes I'm in way over my head, and my computer is now useless. Help!!!

  Read the article

• How migrate my keyring (containing ssh passprases, nautilus remote filesystem, pgp passwords) and network manager connections?

  - by con-f-use

  I changed the disk on my laptop and installed Ubuntu on the new disk. Old disk had 12.04 upgraded to 12.10 on it. Now I want to copy my old keyring with WiFi passwords, ftp passwords for nautilus and ssh key passphrases. I have the whole data from the old disk available (is now a USB disk and I did not delete the old data yet or do anything with it - I could still put it in the laptop and boot from it like nothing happened). On the new disc that is now in my laptop, I have installed 12.10 with the same password, user-id and username as on the old disk. Then I copied a few important config files from the old disk (e.g. ~/.firefox/, ~/.mozilla, ~/.skype and so on, which all worked fine... except for the key ring: The old methods of just copying ~/.gconf/... and ~/.gnome2/keyrings won't work. Did I miss something? 1. Edit: I figure one needs to copy files not located in the users home directory as well. I copied the whole old /home/confus (which is my home directory) to the fresh install to no effect. That whole copy is now reverted to the fresh install's home directory, so my /home/confus is as it was the after fresh install. 2. Edit: The folder /etc/NetworkManager/system-connections seems to be the place for WiFi passwords. Could be that /usr/share/keyrings is important as well for ssh keys - that's the only sensible thing that a search came up with: find /usr/ -name "*keyring* 3. Edit: Still no ssh and ftp passwords from the keyring. What I did: Convert old hard drive to usb drive Put new drive in the laptop and installed fresh version of 12.10 there (same uid, username and passwort) Booted from old hdd via USB and copied its /etc/NetwrokManager/system-connections, ~/.gconf/ and ~/.gnome2/keyrings, ~/.ssh over to the new disk. Confirmed that all keys on the old install work Booted from new disk Result: No passphrase for ssh keys, no ftp passwords in keyring. At least the WiFi passwords are migrated. 4. Edit: Boutny! Ending soon... 5. Edit: Keyring's now in ./local/share/keyrings/. Also interesting .gnupg

  Read the article

• Network connection fails when downloading data

  - by Guus

  In the past few weeks, I've noticed my network connection becoming unstable while downloading files. I'm not sure how to diagnose this issue. I've found that my network connections appear to be temporarily unresponsive (for periods up to a minute or so) while I'm downloading a file (that's large enough to not be downloaded instantly). The problem occurs when downloading data through a webbrowser, but also when using SCP to download data from a remote location. During the period in which network connections are unresponsive, every resource that I try to access over the network is unavailable. This includes: The download itself (SCP reports a 'stalled' download) Web pages (won't load - browsers report 'resource unavailable') SSH sessions (CLI freezes) VPN connections (connections terminate) IM client connections (client starts reconnection attempts) ... (everything is pretty much dead) I've noticed that during such a period, I cannot even access the (web-based) administrative console of the router on my LAN at home (although it remains reachable for other devices). The problem occurs when connected to my home network, but also when I'm in the office. Other devices than my laptop are not affected. Given the above two characteristics I assume the problem cause lies within my laptop, not the network infrastructure. I'm running Ubuntu 11.10. Apart from applying automatic updates from Ubuntu, I can't think of a change that I applied to the OS that could have started the problems. I'm absolutely positive that this issue did not occur up to a few weeks ago (as it's very noticeable, and only started to annoy me in the last few days). When the problem occurs, applications that make use of a network connection fail visibly (I get popups telling me that a VPN connection is broken, for instance). The network manager does not report any issues related to my wifi-connection though. Help?

  Read the article

• NetworkManager detects no networks with a RTL8188CE

  - by Cormac O'Brien

  I'm on a 2011 Lenovo Thinkpad T420i with a Realtek RTL8188CE WiFi adapter. Here's the scenario: I pop in the Ubuntu LiveCD to install. Laptop detects all networks in range, I connect to my home network, internet working great. Once Ubuntu finishes installing, the home network I am connected to is the only one which appears in the applet list. Upon restarting or waking from suspend, NetworkManager does not detect any networks – it simply displays "Disconnected" under the Wireless Network section of the menu. I am able to connect to my home network by using the "Connect to Hidden Wireless Network" option and it works immediately. I have yet to test if this works with other SSIDs. I have tried reinstalling the entire OS as well as NetworkManager and my wireless drivers. For hardware info, I ran: cormac@cormac-T420:~$ sudo lshw -c network Here is the output for my wireless card: *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: d0:df:9a:08:73:50 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.2.0-26-generic firmware=N/A ip=192.168.1.138 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 ioport:5000(size=256) memory:f2500000-f2503fff I can provide more information if required. This was not a problem in Natty or Oneiric. I hope this can be fixed, I don't want to have to ask for an SSID wherever I need to connect.

  Read the article

• Calculation of charged traffic in GPRS network

  - by TyBoer

  I am working with a distributed application communicating over GPRS. I use UDP packets to send business data and ICMP pings to verify connectivity. And now I have a problem with calculating a traffic for which I will be charged by the provider. I have to consider following factors: UDP payload: that is obvious. UDP overhead: UDP header + IP header = 8 + 20 bytes. ICMP echo request without data: IP header + ICMP payload = 28 bytes. ICMP echo reply: as in 3. Above means that for evey data packet I am charged for payload + 28 bytes and for every ping 56 bytes. Am I right or I am missing/misunderstanding something?

  Read the article

• Artificially create a connection timeout error

  - by Mark Ingram

  I've had a bug in our software that occurs when I receive a connection timeout. These errors are very rare (usually when my connection gets dropped by our internal network). How can I generate this kind of effect artificially so I can test our software? If it matters the app is written in C++/MFC using CAsyncSocket classes. Edit: I've tried using a non-existant host, and I get the socket error: WSAEINVAL (10022) Invalid argument My next attempt was to use Alexander's suggestion of connecting to a different port, e.g. 81 (on my own server though). That worked great. Exactly the same as a dropped connection (60 second wait, then error). Thank you!

  Read the article

• Capture IP packets on Dialup connection - Windows 7

  - by Assaf Levy

  Our product utilizes (the wonderful) Winpcap to capture ip packets from all devices with an IP address and analyze them in real time. Unfortunately, we discovered that it does NOT capture any packets on dialup (e.g. PPP) connections on Windows 7, and that there are no near-term plans for enabling this (1). So we need something else. Microsoft Network Monitor and Windows Packet Filter are two options that surfaced during a bit of googling, but before delving into research I wanted to ask the experienced: what are out options, given the following requirements: Capture all in/outbound IP packets on the machine. Complete background processing - no UI should be involved. Support Windows Vista / 7. Performance (user should not feel the difference). Thanks in advance.

  Read the article

• how to detect datacard connect and disconnect event on win32

  - by Vinayaka Karjigi

  Hi All, I have a data card, as soon as i insert the data card, i am getting the events by using wm_device_change event. But I also want to get event, when my data connect actually connects to out side world. I mean to say, as soon as we click on connect/disconnect button of data card,i want to get the event. exactly speaking wanted to know, when connection is established and disconnected. data card is vodaphone data card and i am trying to browse using that data card. what ever is the SDK, somewhere the OS should get the event of connection and disconnection to network is there any way to access that event which OS is getting. as i can see in notificaiton the changes of vodaphone connection and LAN connection data card is a USB device having SIM within it, and can be used to access internet through GPRS. can i know how to do this in win32 c/c++ programe. with regards Vinayaka Karjigi

  Read the article

• No network connectivity for my CentOS 6 installed in VMWare Fusion in MacOSX Lion

  - by gilzero

  I installed CentOS 6.2 (CentOS-6.2-x86_64-minimal.iso) with VMWare Fusion(Version 4.1.2). (Not with EasyInstall). I am using MacOSX Lion, connect to internet via WIFI. The centos installed does not have network connectivity. *How may I configure it to connect to wifi? * Thanks for any help. Below is screenshot of ifconfig: With the setting Network Adapter, I tried both NAT and Bridged WiFi.

  Read the article

• No Connectivity to ESX guests on one server

  - by Sam Cogan

  I have a number of ESX servers hosting VM's, all but one of these works ok, however one server has a problem where any guests on not contactable over the network. The ESX hosts is contactable, is integrated int VCenter, and you can even live migrate VM's to and from this server, but any VM's on that server are unable to talk to the rest of the network. The VM's NIC is shown as Up and has the right IP configuration, and as soon as you move it back to another host it works fine.

  Read the article

• SQL Server 2005 and 'General network error'

  - by Mariusz

  I know there is a lot of information in the Internet about solving this problem, but it didn't help me. My Delphi application uses dbExpress controls to access the database and execute SQL queries. Once every couple of days, however, it stops working because the database connection fails. This happens on several different computers with different versions of Windows. MSSQL Server 2005 (version 9.0.4035) is installed on each of them. The above mentioned application executes queries every couple of seconds, and they are mainly insert commands. Every couple of days I get a series of exceptions like the following one: [DBNETLIB][ConnectionOpen (PreLoginHandshake()).]General network error. Check your network documentation. And then the SQL server becomes inaccessible until I restart it manually. The information I found in the Internet say that I should install some service packs, change some registry entries etc., but believe me, none of these helps and I don't know what else to do now. Could you please help me solve this problem? Any clues or ideas? I can give you some more information about the server or the application if necessary. Thank you very much in advance.

  Read the article

• Poll multiple desktops/servers on a network remotely to determine the IP Type: Static or DHCP

  - by Charles Laird

  Had a gentleman answer 90% of my original question, which is to say I now have the ability to poll a device that I am running the below script on. The end goal is to obtain IP type: Static or DHCP on all desktop/servers on a network I support. I have the list of servers that I will input in a batch file, just looking for the code to actually poll the other devices on the network from one location. Output to be viewed: Device name: IP Address: MAC Address: Type: Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller NULL 00:00:F3:44:C6:00 DHCP Generic Marvell Yukon 88E8056 based Ethernet Controller 192.168.1.102 00:00:F3:44:D0:00 DHCP ManagementClass objMC = new ManagementClass("Win32_NetworkAdapterConfiguration"); ManagementObjectCollection objMOC = objMC.GetInstances(); txtLaunch.Text = ("Name\tIP Address\tMAC Address\tType" +"\r\n"); foreach (ManagementObject objMO in objMOC) { StringBuilder builder = new StringBuilder(); object o = objMO.GetPropertyValue("IPAddress"); object m = objMO.GetPropertyValue("MACAddress"); if (o != null || m != null) { builder.Append(objMO["Description"].ToString()); builder.Append("\t"); if (o != null) builder.Append(((string[])(objMO["IPAddress"]))[0].ToString()); else builder.Append("NULL"); builder.Append("\t"); builder.Append(m.ToString()); builder.Append("\t"); builder.Append(Convert.ToBoolean(objMO["DHCPEnabled"]) ? "DHCP" : "Static"); builder.Append("\r\n"); } txtLaunch.Text = txtLaunch.Text + (builder.ToString()); I'm open to recommendations here.

  Read the article

• transmit a java.lang.reflect.Proxy over a network

  - by panzi

  Is there a convenient way to transmit an object including its code (the class) over a network (not just the instance data)? Don't ask me why I want to do this. It's in an assignment. I asked several times if that is really what they meant and the didn't rephrase their answer so I guess they really want us to transmit code (not just the field data) over a network. To be honest I have no clue why we need a Proxy in this assignment anyway, just writing a simple class would do IMO. The assignment says that we should instantiate the proxy on the server and transmit it to the client (and yes, they talk about a java.lang.reflect.Proxy, they name this class). Because there is no class file for a proxy I can't deploy that. I guess I would have to somehow read out the bytecode of the generated Proxy, transmit it to the client and then load it. Which makes absolutely no sense at all, but this seems what they want us to do. I don't get why.

  Read the article

• Local Network - Windows 7 and Vista can't see each other

  - by ca8msm

  I've got a strange issue at home that has been bugging me for weeks, but I really need to get it sorted now so I'll detail as much as I can and hopefully someone can spot what might might be wrong. I have a wireless router connected to the internet and 3 devices connected to it. They are: Name OS Network IPv4 PC1 Windows 7 WORKGROUP 192.168.2.2 LAPTOP1 Vista WORKGROUP 192.168.2.3 PS3 192.168.2.4 and they all get their IP addresses dynamically. Both PC1 and LAPTOP1 can ping PS3 and get a response. PC1 and LAPTOP1 are unable to ping each other by ip address unless I ping by their name (which bizarrely shows that it is pinging via the IPv6 address). Also, to confirm this both PC1 and LAPTOP1 can ping each other via the long IPv6 address that they both have so they can obviously see each other just not via IPv4. I've disabled the firewalls on both machines as well to rule that out. I don't really know what IPv6 is used for and I've tried disabling it on both machines but all that happens then is that neither machine can see each other at all then. Does anyone have any idea of what may be stopping them seeing each other, any ways I can look at fixing this, or any network tools that may help identify where it is failing? Thanks, Mark

  Read the article

• Calling a network State check from other activities

  - by Laurent

  I realize this question has been answered before but couldn't find an answer that deals with my specific case. I want to create a class called "InternetConnectionChecks" that will handle checking a network state and http timeouts. I'll call the methods twice in the app (once at the beginning to get data from a server, and once at the end to send user orders to the server). For good form I'd like to put all these methods in a single class rather than copy/paste at different points in my code. To check the network state, I'm using ConnectivityManager; thing is, getSystemService requires a class that extends Activity. package arbuckle.app; import android.app.Activity; import android.app.Service; import android.content.Context; import android.net.ConnectivityManager; import android.net.NetworkInfo; public class InternetConnectionChecks extends Activity { public boolean isNetworkAvailable(){ ConnectivityManager connectivityManager = (ConnectivityManager) getSystemService(Context.CONNECTIVITY_SERVICE); NetworkInfo activeNetworkInfo = connectivityManager.getActiveNetworkInfo(); if ((activeNetworkInfo != null)&&(activeNetworkInfo.isConnected())){ return true; }else{ return false; } } } QUESTION: if I call the method isNetworkAvailable from another activity, am I: - going to hit up serious errors. - violating good coding form? *If this isn't the right way to do things, can you point me in the right direction to set up a separate class I can call on to check internet connection? Thanks everyone!

  Read the article

• an old scanner (SCSI connectivity) problem with windows xp

  - by mm_farahat

  i have an old scanner mirascan 640p that uses SCSI connectivity , it works only with windows 9x but doesn't work with xp and above , i found that xp not supporting SCSI by default so a tried "Advanced SCSI Programming Interface" (ASPI) http://www.adaptec.com/en-US/downloads/ but it doesn't work also any ideas please ???

  Read the article

• VirtualBox reinstalling & updating has left me with Too Many Network Adapters. How Do i remove them?

  - by S3curityPlu5

  I have too many network adapters. I have had to reinstall, repair VirtualBox a few times, and I have three NICs in my laptop. I definitely don't need to have 14 bridged networking drivers though, and I cannot uninstall them. I only want to keep the new ones that came with VirtualBox 4.1.20. When I go into the registry there are tons of places with these adapters. I have searched online up to 10 pages of Google, and VirtualBox forums, and no one has mentioned this problem nor explained how to delete these annoying extra network adapters. Please offer some assistance or at least tell me how anybody else has dealt with this. I only need 1 host-only network adapter, 1 bridged networking adapter for each of my network cards. Take a look:

  Read the article

• How to get Windows 7 to automatically connect to an ad-hoc network?

  - by George Edison

  I have two machines - one is running Ubuntu 12.04 64-bit and the other is running Windows 7 Starter Edition (32-bit). The Ubuntu machine is connected to the Internet via the eth0 interface. That machine also has a wireless network interface (wlan0) that is currently functioning as an ad-hoc network. I can connect to the ad-hoc network just fine with the Windows machine but each time I wish to do so, I must manually initiate the connection and enter the password. Is there some way to instruct Windows to automatically connect to this network (an option I have for standard wireless networks but not ad-hoc networks)?

  Read the article

• How can we use Microsoft Groove with peers existing in both secure and unsecured network segments?

  - by MikeHerrera

  We have been instructed to implement a Microsoft Groove workspace. This would normally not be a concern, but the workspace will be utilized by machines which exist in our internal/restricted network as well as from peers from an outside/unknown network. Does there exist a best-practice for such an implementation?... or would this potentially expose the restricted network too broadly?

  Read the article

• Vaio Laptop wireless connectivity loss after some minute

  - by Mehran Meidani

  I have a big problem with my laptop, My laptop loss it's connectivity to internet randomly! for Example sometimes it's ok up to 1h but usually the problem occurred after 5 min. When I run these command, i can continue working with internet : ipconfig /release ipconfig /renew If i turn wireless off and on, the problem don't solved I have another laptop (Macbook pro) and it doesn't have any problem I use Linksys E2000 as an wireless access point Model : Sony vaio sa21gx OS : Windows 7 SP1 Thank you for your help and sorry for my bad english :)

  Read the article

• Read/Write a file from/to network folder/share using Python?

  - by MA1

  How to Write/Read a file to/from a network folder/share using python? The application will run under Linux and network folder/share can be a Linux/Windows System. Also, how to check that network folder/share has enough space before writing a file? What things should i consider?

  Read the article

• How to access a Windows Server 2008 network share from Windows Vista Home Edition?

  - by The Digital Ninja

  Is there any way to allow access a network share on Windows Server 2008 to a specific Vista Home machine/user? I have two Vista Home machines on my network (ugh) and I need a user from one of them to be able to access a network share on my new server 2008 DC. How ever I don't want to just allow "everyone" access.

  Read the article

• wireless problem: Internet slow connection or limited connectivity

  - by jack

  Hi I have no idea on this problem. My wireless connection doesn't work sometimes. I find it's due to my XP and I have no problem with my Win 7 machine. The problem is - Internet Connection a bit slower than usual Limit connectivity issue I use netsh reset for resetting network configurations but it helps sometimes or not help at all. Any ideas? Thank you.

  Read the article

• how to create a 802.11n wireless network between laptops and asus n-13 wireless adapter ?

  - by xpugur

  I have a asus usb n-13 wireless adapter and 3 laptops in a home we try to create a network witn 802.11n standards but failed each time laptops have intel 5100 agn. We try to create network with wpa-2 personal encryption that also fails(couldn't connect) but with wep encryption connects but with 802.11g standard... so do you know how to create a 802.11N based network? ... thank you...

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >