Search Results

Search found 18897 results on 756 pages for 'network connectivity'.

Page 32/756 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • Complete Guide to Networking Windows 7 with XP and Vista

    - by Mysticgeek
    Since there are three versions of Windows out in the field these days, chances are you need to share data between them. Today we show how to get each version to be share files and printers with one another. In a perfect world, getting your computers with different Microsoft operating systems to network would be as easy as clicking a button. With the Windows 7 Homegroup feature, it’s almost that easy. However, getting all three of them to communicate with each other can be a bit of a challenge. Today we’ve put together a guide that will help you share files and printers in whatever scenario of the three versions you might encounter on your home network. Sharing Between Windows 7 and XP The most common scenario you’re probably going to run into is sharing between Windows 7 and XP.  Essentially you’ll want to make sure both machines are part of the same workgroup, set up the correct sharing settings, and making sure network discovery is enabled on Windows 7. The biggest problem you may run into is finding the correct printer drivers for both versions of Windows. Share Files and Printers Between Windows 7 & XP  Map a Network Drive Another method of sharing data between XP and Windows 7 is mapping a network drive. If you don’t need to share a printer and only want to share a drive, then you can just map an XP drive to Windows 7. Although it might sound complicated, the process is not bad. The trickiest part is making sure you add the appropriate local user. This will allow you to share the contents of an XP drive to your Windows 7 computer. Map a Network Drive from XP to Windows 7 Sharing between Vista and Windows 7 Another scenario you might run into is having to share files and printers between a Vista and Windows 7 machine. The process is a bit easier than sharing between XP and Windows 7, but takes a bit of work. The Homegroup feature isn’t compatible with Vista, so we need to go through a few different steps. Depending on what your printer is, sharing it should be easier as Vista and Windows 7 do a much better job of automatically locating the drivers. How to Share Files and Printers Between Windows 7 and Vista Sharing between Vista and XP When Windows Vista came out, hardware requirements were intensive, drivers weren’t ready, and sharing between them was complicated due to the new Vista structure. The sharing process is pretty straight-forward if you’re not using password protection…as you just need to drop what you want to share into the Vista Public folder. On the other hand, sharing with password protection becomes a bit more difficult. Basically you need to add a user and set up sharing on the XP machine. But once again, we have a complete tutorial for that situation. Share Files and Folders Between Vista and XP Machines Sharing Between Windows 7 with Homegroup If you have one or more Windows 7 machine, sharing files and devices becomes extremely easy with the Homegroup feature. It’s as simple as creating a Homegroup on on machine then joining the other to it. It allows you to stream media, control what data is shared, and can also be password protected. If you don’t want to make your Windows 7 machines part of the same Homegroup, you can still share files through the Public Folder, and setup a printer to be shared as well.   Use the Homegroup Feature in Windows 7 to Share Printers and Files Create a Homegroup & Join a New Computer To It Change which Files are Shared in a Homegroup Windows Home Server If you want an ultimate setup that creates a centralized location to share files between all systems on your home network, regardless of the operating system, then set up a Windows Home Server. It allows you to centralize your important documents and digital media files on one box and provides easy access to data and the ability to stream media to other machines on your network. Not only that, but it provides easy backup of all your machines to the server, in case disaster strikes. How to Install and Setup Windows Home Server How to Manage Shared Folders on Windows Home Server Conclusion The biggest annoyance is dealing with printers that have a different set of drivers for each OS. There is no real easy way to solve this problem. Our best advice is to try to connect it to one machine, and if the drivers won’t work, hook it up to the other computer and see if that works. Each printer manufacturer is different, and Windows doesn’t always automatically install the correct drivers for the device. We hope this guide helps you share your data between whichever Microsoft OS scenario you might run into! Here are some other articles that will help you accomplish your home networking needs: Share a Printer on a Home Network from Vista or XP to Windows 7 How to Share a Folder the XP Way in Windows Vista Similar Articles Productive Geek Tips Delete Wrong AutoComplete Entries in Windows Vista MailSvchost Viewer Shows Exactly What Each svchost.exe Instance is DoingFixing "BOOTMGR is missing" Error While Trying to Boot Windows VistaShow Hidden Files and Folders in Windows 7 or VistaAdd Color Coding to Windows 7 Media Center Program Guide TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi

    Read the article

  • How to Work with the Network from the Linux Terminal: 11 Commands You Need to Know

    - by Chris Hoffman
    Whether you want to download files, diagnose network problems, manage your network interfaces, or view network statistics, there’s a terminal command for that. This collection contains the tried and true tools and a few newer commands. You can do most of this from a graphical desktop, although even Linux users that rarely use the terminal often launch one to use ping and other network diagnostic tools. Make Your Own Windows 8 Start Button with Zero Memory Usage Reader Request: How To Repair Blurry Photos HTG Explains: What Can You Find in an Email Header?

    Read the article

  • Nice network diagram editor?

    - by Nicolas Raoul
    Writing a commercial proposal, I want to create a nice graphic showing the clients the architecture I thought of for their IT network, with servers, network connections, firewall, load-balancing, etc. For years I have been using dia, but I am tired of it because: the results are not satisfying, very few network elements are available, and each element's graphic representation is really ugly. Question: How to create nice network diagrams? If a better set of elements was available for dia, that would be a solution.

    Read the article

  • Step-by-Step: Implementing Hyper-V Network Virtualization with Windows Server 2012

    - by KeithMayer
    True network and virtual machine portability - that's the ultimate goal of Hyper-V Network Virtualization - allowing you, as an IT Pro, to align changing business needs with the best physical resource locations to run your VMs and network services - easily, without the sweeping network, router, switch, firewall and DNS changes with which we'd traditionally be plagued when merely attempting the feat of relocating VMs to a new rack, subnet or data center ... WOW!

    Read the article

  • Intel Network Connection: This device cannot start. (Code 10)

    - by harryuser
    Hi, I have a Intel® Desktop Board DP55KG (see http://www.intel.com/products/desktop/motherboards/DP55KG/DP55KG-overview.htm), which has a Intel 82578DC Gigabit Network Connection on board. Additionally, I have a Intel PRO/1000 PT Dual Port Server Adapter in a PCI express slot and I am running Windows 7 Professional 32-bit. The problem I am having is that the Intel 82578DC Gigabit Network Connection will not start on boot with the following message: "This device cannot start. (Code 10)". Disabling and then enabling the device after boot makes the network connection work again without any problems, but as soon as I reboot the problem occurs again. Any suggestion how to fix this? I have seen this problem on another Intel S3420GP board as well in Windows 7 that is.

    Read the article

  • Connectivity with SQL Server Express 2008 r2 and SQL Server 2000 on same machine

    - by Jim R
    At first glance this may same a duplicate of Installing both SQL Server 2000 and SQL Server 2008 on the same machine, but it is not. I have SQL Server 2000 and SQL Server 2008 R2 installed on the same machine and working fine. My problem lies with connecting to the 2008 R2 server from a remote machine. My connectivity needs to be TCP. The legacy installation or SQL 2000 uses the default port of 1433. The named instance is by default configured to use 'Shared Memory' and is working fine. When I configured the 2008 R2 server to use 1433 (I did not think that thru) the service refused to start becasue 1433 was already in use by the legacy SQL 2000 default instance. Doh! What I want to do is have both servers available simultaneously via TCP. both servers need not be on the same port, put if I cannot run them on the same port, then how do I configure the clients? Is there not some kind of proxy available that can monitor the 1433 port and pass the request thru to the correct SQL instance by name? Is this capability built into SQL server already? Thanks, Jim

    Read the article

  • How can I tell what user account is being used by a service to access a network share on a Windows 2008 server?

    - by Mike B
    I've got a third-party app/service running on a Windows 2003 SP2 server that is trying to fetch something from a network share on Windows 2008 box. Both boxes are members of an AD domain. For some reason, the app is complaining about having insufficient permissions to read/write to the store. The app itself doesn't have any special options for acting on the authority of another user account. It just asks for a UNC path. The service is running with a "log on as" setting of Local System account. I'd like to confirm what account it's using when trying to communicate with the network share. Conversely, I'd also like more details on if/why it's being rejected by the Windows 2008 network share. Are there server-side logs on 2008 that could tell me exactly why a connection attempt to a share was rejected?

    Read the article

  • SharePoint Business Connectivity Services (BCS) Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

    - by g18c
    I am running SharePoint 2010 with SQL 2012, I am trying to get Business Connectivity Services (BCS) running but I am facing a double-hope authentication issue. Everytime I try to connect to the external BCS list created in SharePoint designer, I get the error Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. In the event viewer on the SQL server I see a login failure for an anonymous user from the SP server IP address. Background information below: I have enabled Kerberos under SharePoint Central admin. I have the following AD domain accounts: SP_Farm - main website pool SP_Services - for SharePoint services (including BCS) SQL_Engine - SQL database engine I then created the following with SetSPN: SetSPN -S http/intranet mydomain\SP_Farm SetSPN -S http/intranet.mydomain.local mydomain\SP_Farm SetSPN -S SPSvc/SPS mydomain\SP_Farm SetSPN -S MSSQLSvc/SQL1 mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1.mydomain.local mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1:1433 mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1.mydomain.local:1433 mydomain\SQL_DatabaseEngine I then delegated the AD accounts for any authentication protocol to the following: SP_Farm - SP_Farm (http service type, intranet) SP_Farm - SQL_DatabaseEngine (MSSQLSvc, sql1) SP_Service - SP_Service (SPSvc) SP_Service - SQL_DatabaseEngine (MSSQLSvc, sql1) I have also checked the WFE is being logged on to with Kerberos, with the WFE server event log showing event ID 4624 with Kerberos authentication, this is OK. The SQL is also showing connections authenticated as Kerberos from the WFE with the following query: Select s.session_id, s.login_name, s.host_name, c.auth_scheme from sys.dm_exec_connections c inner join sys.dm_exec_sessions s on c.session_id = s.session_id Despite the above, credentials are not passed from the client through the SharePoint server to the SQL server, only the anonymous account is used. I get the following error in the WFE server for 'BusinessData' ID 8080: Could not open connection using 'data source=sql1.mydomain.local;initial catalog=MSCRM;integrated security=SSPI;pooling=true;persist security info=false' in App Domain '/LM/W3SVC/1848937658/ROOT-1-129922939694071446'. The full exception text is: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. If I set a username and password with the Secure Store Service and set the external list to use the impersonated credentials, the list works. Any ideas what I have missed and what can be tried next?

    Read the article

  • How do ring and bus network connect to router?

    - by lantopology
    Sorry this is probably a very silly question, but for some reason i am confused. How does a LAN with bus or ring topology connect to a router and other LANs? For example in a star network they all connect to a switch which can then connect to a router, but where does a switch go and fit in a bus or ring topology? In this image of a ring network there is no switch: http://www.brainbell.com/tutorials/Networking/images/01fig04.gif would the switch in the ring network simply be placed alongside the other nodes? Thank you very much

    Read the article

  • notation of Path to files/folders/drives that is shared on a network in windows?

    - by claws
    Hello, When some thing shared on network using windows network share option. Some people use path like \\something\something\something$ I'm don't know if this is correct way or not. but as far as I remember there is a dollar sign. Can any one please tell me. What is this notation? Where can I find more details about this? What is samba server/sharing? I don't understand when people use it. Is it something related to Linux? EDIT I'm a programmer. I guess this file sharing on network using windows uses client server architecture. I want to know what is this server on windows called? What protocol does it use? client is of course our windows explorer.exe? Which service in services.msc is responsible for this?

    Read the article

  • ESX hosts lose connectivity with iSCSI SAN LUNs

    - by Themist
    I've been experiencing this issue for a couple of months now where my ESX hosts lose connectivity with my iSCSI SAN vmfs volumes. As a results the ESX hosts enter a nonresponsive mode the associated VMs disconnect and the only remedy is to reboot the host. This issue happens randomly . I have escalated this issue with VMWare but I haven't had any solution to the issue yet. I see no errors on my switches and there are no hardware issues as well. My SAN infrastucture is solid and there are 2 paths for every vmfs volume. Did anybody else experienced a similar issue? edit: Here are some more details: The iSCSI SAN software is Datacore Sanmelody 2.0.4.2 running on 2 HP Proliant G5 servers. The storage attached to each of the servers is an HP MSA70 and all the iSCSI SAN Volumes that are presented to my 4 ESX hosts are mirrored. I have two iSCSI swithces HP Procurve 1800G-24 that are trunked together. My SANLELODY servers are using NC360T NICs. I team two NICs and have one cable connecting to each iSCSi switch. Each ESX server uses two NICs as well for the iSCSI Network.

    Read the article

  • Where is the network connection enabled/disabled setting stored?

    - by minerj
    I have an Amazon EC2 instance of Windows Server 2008 where some genius managed to disable the network connection so that the instance is now isolated in its own little universe. I can shut down the instance and edit the "C:\" drive volume by attaching it to another running instance. This is equivalent to removing the system drive from a dead machine and attaching it to another computer to edit the files. Question: Where is the network connection enabled / disabled setting stored? If I can tweak this setting by editing the registry or a file to re-enable the network connection, I can then resurrect my Amazon server.

    Read the article

  • Why is the network speed on my Mac Pro (early 2009) so slow?

    - by Rafael
    I have a really weird networking issue on my Mac Pro (Early 2009). I can’t get higher network speeds than about 2MBit/s. It doesn’t matter if this is over AirPort or one of the Ethernet ports. An iMac and a Mac mini in the same network with almost the same configuration get about 25-30 MBit/s. I’ve read a couple of things about this on the official Apple forums, but there is no helpful information. Anyone else with Mac Pro network speed issues and who knows how to solve them?

    Read the article

  • Subversion for web designer: repository on a network share and ftp to the live server?

    - by ceatus
    My configuration: htdocs on a windows network share (z:) web developers check out with dreamweaver modify and check in back to the drive z LAMP running on a Ubuntu server virtualized on Hyper-V with apache that point on the z drive for dev in order to test the websites Upload by FTP on the live server Now: I need multiple access to the repository, keep them on a network shares and we manage about 200 websites. All the web developers, administrators and IT need to access to the share. I found out that creating a svn server is the best way for me, so I created it on a Ubuntu Server which is virtualized on Hyper-V. Right now I have the repos local on the Ubuntu Server but I'd like them on my network drive and I'd like to have a post-commit, if possible, in order to ftp directly on my live server. Do you guys think that a WebDav solution would be better? Thanks in advance Angelo

    Read the article

  • Run a server and local wireless network off my laptop with no internet.

    - by greg
    I'm trying to run a wireless network from my computer so that people in range can connect to the network and hit a website running off my machine. I don't want to enable file sharing or remote access or anything else of that nature. I just want them to be able to connect to the network, type in an IP or domain name in a browser, and be taken to a locally hosted website. No broader internet access needed. Any ideas / links to good tutorials on the subject? Is this something i can achieve with just a wifi card or will need a router?

    Read the article

  • How to resolve 'No internet connectivity issues' with a Virtualised 2008 R2 Server using Forefront UAG

    - by user684589
    I have spent some considerable time reading up on as many possible blogs and articles as I can to help me solve why my VM (Running on Hyper-V) for DirectAccess has suddenly stopped being able to access the internet. The VM setup shares the same internet connection on which I have written and submitted this question so I know that the actual underlying internet connection is fully functional. Previous to last week the DirectAccess was fully functional and had no issues. This is a recent problem which was led up to by a number of consistent crashes on the DA machine when access was attempted. Upon reboot all seemed well until recently. I am not certain whether it is relevant, but previously to this I had a number of power issues where the entire VM host shutdown unexpectedly leaving around 8 VM's in a bad way. Upon restart, the UAG DirectAccess machine was unable to access its configuration service (although the service was started) but this seemed to relate to the Light-Weight Active Directory Service AD LDS which had a corrupted database. Having repaired this database, I restarted the service and could subsequently reconnect to the configuration service again. For good measure I re-bound the network adapters (virtualised through Hyper-V) and DirectAccess claimed to be all happy again. However as it stands my machine is still unable to access the internet showing the "No internet connectivity" exclamation mark for the external facing NIC. I have also tried removing the adapters, disabling, re-enabling and the problem persists. The intranet part of the VM CorpNet seems to be fully functional as before and I'm running out of ideas. Any input would be greatly appreciated. I am not an advanced Domain Administrator so please be gentle.

    Read the article

  • Windows has automatically mapped my network drives to my local disk - how do I stop it doing so?

    - by cyborg
    Windows XP decided when I logged on that because the network was unavailable at the time that two of my network drives should be mapped to my local drive so that data would be saved. All well and good but I need it to stop now so I can use my network drives again. I can't find anything relating to the feature but I can't remember the specifics of the message it gave me when it started this operating mode and Google searches for the sort of terms above leads me to a slew of irrelevancies. Any ideas? Thanks.

    Read the article

  • How Do I Map a Drive Network Share Using the Linux Terminal?

    - by nicorellius
    Still getting used to Linux, and the GUI is great. I have Ubuntu 10 and I can go to Network and see the Windows network. Then double clicking this gets me to the drives that are shared. Then when I go back to the terminal and use: cd ~/.gvfs I can see the mapped drives. But it would be nice if I could this without all the mouse clicking. So how do I map network drives in the terminal, something akin to net use for Windows.

    Read the article

  • How to remove permanent map of a network drive on OS X Lion?

    - by Flijfi
    Some time ago I mapped a network drive on my Snow Leopard Mac, which was upgraded to Lion. The network drive is not active any more and I receive popups all the time with the error: There was a problem connecting to the server XXXX. I have no idea how I configured at the time. I may have included a mount command, in a config file but I don't know any more where I did it. I reviewed the Preferences/Account/Login items and there is no permanent mapping there. OSX is updated as Nov 27,2011 and the issue is not related to the upgrade to Lion itself but to a misconfiguration. Any help will be greatly appreciated. (If you have the opposite problem, here is the link to solve it: Permanently map a network drive on Mac OS X Leopard)

    Read the article

  • Windows 7 unidentified network (or limited access) after hibernate.

    - by null
    My windows 7 network will show limited access or unidentified network after coming up from hibernation. In the office I normally use LAN connection, I turn-off my wireless card (DELL Latitude has on/off switch for the wireless card). When I back at home I will turn on the wireless card, but it will take about 15 seconds to detect my home WIFI and then show limited access. I will have to restart the notebook and it will be able to connect to my WIFI and internet. The problem will be solved if I restart the notebook, but that defeats the purpose of hibernation doesn't it? I have tried uninstalling the wireless card driver but still does not solve it. I also tried updating my network card driver but windows says I am using the latest driver. On support.dell.com also showing I am using the latest driver.

    Read the article

  • VMware Player loses internet connectivity

    - by Martha
    Periodically, the internet simply stops working in my virtual machine, and the only way I can get it working again is to restart the host computer. Since I use the virtual machine specifically for testing web pages, this is, shall we say, a bother. Details: I have Windows XP Pro running in VMware Player (v. 3.0.0 build-203739) on a Windows 7 host. It's set to NAT (shared IP address) because the firewall won't allow a bridged connection. Every couple of days or so, first the internet slows down to a crawl, then eventually it stops working altogether. Both VMWare and the virtual OS report that they are connected, everything looks just peachy, I can reach the internet from the host, but on the VM, all web pages time out and/or report that the server could not be found. (Browser-independent; tried with IE, FF, Chrome, Safari, and Opera.) When this happens, the only way I've found to restore the internet connectivity is to restart the host machine. Restarting the VM doesn't help, nor does refreshing network connections on either the host or the guest. (Although I'm not entirely sure I've found the proper way to refresh a network connection in Windows 7...) I have not noticed any predictability about when the problem occurs, i.e. it's not immediately after I do anything special. It seems to occur mostly after putting the host to sleep once or twice, but it has happened even if the host has been in continuous use. It also seems independent of when I start using the VM - sometimes, I wake up the VM and the internet is really slow in it, then eventually stops working altogether; other times, I wake up the VM, use it perfectly happily for a while, then suddenly the internet is gone. Does anyone know why this is occurring? Failing that, is there a workaround that's less drastic than restarting the host? (Windows 7 startup times are blazingly fast compared to previous versions of Windows, but it's still a hassle to close all my programs and reopen them again.) Edit: while badges overall are nice, the Tumbleweed badge isn't helping me to solve my problem. Hasn't anyone encountered anything even remotely similar?

    Read the article

  • How to Reuse Your Old Wi-Fi Router as a Network Switch

    - by Jason Fitzpatrick
    Just because your old Wi-Fi router has been replaced by a newer model doesn’t mean it needs to gather dust in the closet. Read on as we show you how to take an old and underpowered Wi-Fi router and turn it into a respectable network switch (saving your $20 in the process). Image by mmgallan. Why Do I Want To Do This? Wi-Fi technology has changed significantly in the last ten years but Ethernet-based networking has changed very little. As such, a Wi-Fi router with 2006-era guts is lagging significantly behind current Wi-Fi router technology, but the Ethernet networking component of the device is just as useful as ever; aside from potentially being only 100Mbs instead of 1000Mbs capable (which for 99% of home applications is irrelevant) Ethernet is Ethernet. What does this matter to you, the consumer? It means that even though your old router doesn’t hack it for your Wi-Fi needs any longer the device is still a perfectly serviceable (and high quality) network switch. When do you need a network switch? Any time you want to share an Ethernet cable among multiple devices, you need a switch. For example, let’s say you have a single Ethernet wall jack behind your entertainment center. Unfortunately you have four devices that you want to link to your local network via hardline including your smart HDTV, DVR, Xbox, and a little Raspberry Pi running XBMC. Instead of spending $20-30 to purchase a brand new switch of comparable build quality to your old Wi-Fi router it makes financial sense (and is environmentally friendly) to invest five minutes of your time tweaking the settings on the old router to turn it from a Wi-Fi access point and routing tool into a network switch–perfect for dropping behind your entertainment center so that your DVR, Xbox, and media center computer can all share an Ethernet connection. What Do I Need? For this tutorial you’ll need a few things, all of which you likely have readily on hand or are free for download. To follow the basic portion of the tutorial, you’ll need the following: 1 Wi-Fi router with Ethernet ports 1 Computer with Ethernet jack 1 Ethernet cable For the advanced tutorial you’ll need all of those things, plus: 1 copy of DD-WRT firmware for your Wi-Fi router We’re conducting the experiment with a Linksys WRT54GL Wi-Fi router. The WRT54 series is one of the best selling Wi-Fi router series of all time and there’s a good chance a significant number of readers have one (or more) of them stuffed in an office closet. Even if you don’t have one of the WRT54 series routers, however, the principles we’re outlining here apply to all Wi-Fi routers; as long as your router administration panel allows the necessary changes you can follow right along with us. A quick note on the difference between the basic and advanced versions of this tutorial before we proceed. Your typical Wi-Fi router has 5 Ethernet ports on the back: 1 labeled “Internet”, “WAN”, or a variation thereof and intended to be connected to your DSL/Cable modem, and 4 labeled 1-4 intended to connect Ethernet devices like computers, printers, and game consoles directly to the Wi-Fi router. When you convert a Wi-Fi router to a switch, in most situations, you’ll lose two port as the “Internet” port cannot be used as a normal switch port and one of the switch ports becomes the input port for the Ethernet cable linking the switch to the main network. This means, referencing the diagram above, you’d lose the WAN port and LAN port 1, but retain LAN ports 2, 3, and 4 for use. If you only need to switch for 2-3 devices this may be satisfactory. However, for those of you that would prefer a more traditional switch setup where there is a dedicated WAN port and the rest of the ports are accessible, you’ll need to flash a third-party router firmware like the powerful DD-WRT onto your device. Doing so opens up the router to a greater degree of modification and allows you to assign the previously reserved WAN port to the switch, thus opening up LAN ports 1-4. Even if you don’t intend to use that extra port, DD-WRT offers you so many more options that it’s worth the extra few steps. Preparing Your Router for Life as a Switch Before we jump right in to shutting down the Wi-Fi functionality and repurposing your device as a network switch, there are a few important prep steps to attend to. First, you want to reset the router (if you just flashed a new firmware to your router, skip this step). Following the reset procedures for your particular router or go with what is known as the “Peacock Method” wherein you hold down the reset button for thirty seconds, unplug the router and wait (while still holding the reset button) for thirty seconds, and then plug it in while, again, continuing to hold down the rest button. Over the life of a router there are a variety of changes made, big and small, so it’s best to wipe them all back to the factory default before repurposing the router as a switch. Second, after resetting, we need to change the IP address of the device on the local network to an address which does not directly conflict with the new router. The typical default IP address for a home router is 192.168.1.1; if you ever need to get back into the administration panel of the router-turned-switch to check on things or make changes it will be a real hassle if the IP address of the device conflicts with the new home router. The simplest way to deal with this is to assign an address close to the actual router address but outside the range of addresses that your router will assign via the DHCP client; a good pick then is 192.168.1.2. Once the router is reset (or re-flashed) and has been assigned a new IP address, it’s time to configure it as a switch. Basic Router to Switch Configuration If you don’t want to (or need to) flash new firmware onto your device to open up that extra port, this is the section of the tutorial for you: we’ll cover how to take a stock router, our previously mentioned WRT54 series Linksys, and convert it to a switch. Hook the Wi-Fi router up to the network via one of the LAN ports (consider the WAN port as good as dead from this point forward, unless you start using the router in its traditional function again or later flash a more advanced firmware to the device, the port is officially retired at this point). Open the administration control panel via  web browser on a connected computer. Before we get started two things: first,  anything we don’t explicitly instruct you to change should be left in the default factory-reset setting as you find it, and two, change the settings in the order we list them as some settings can’t be changed after certain features are disabled. To start, let’s navigate to Setup ->Basic Setup. Here you need to change the following things: Local IP Address: [different than the primary router, e.g. 192.168.1.2] Subnet Mask: [same as the primary router, e.g. 255.255.255.0] DHCP Server: Disable Save with the “Save Settings” button and then navigate to Setup -> Advanced Routing: Operating Mode: Router This particular setting is very counterintuitive. The “Operating Mode” toggle tells the device whether or not it should enable the Network Address Translation (NAT)  feature. Because we’re turning a smart piece of networking hardware into a relatively dumb one, we don’t need this feature so we switch from Gateway mode (NAT on) to Router mode (NAT off). Our next stop is Wireless -> Basic Wireless Settings: Wireless SSID Broadcast: Disable Wireless Network Mode: Disabled After disabling the wireless we’re going to, again, do something counterintuitive. Navigate to Wireless -> Wireless Security and set the following parameters: Security Mode: WPA2 Personal WPA Algorithms: TKIP+AES WPA Shared Key: [select some random string of letters, numbers, and symbols like JF#d$di!Hdgio890] Now you may be asking yourself, why on Earth are we setting a rather secure Wi-Fi configuration on a Wi-Fi router we’re not going to use as a Wi-Fi node? On the off chance that something strange happens after, say, a power outage when your router-turned-switch cycles on and off a bunch of times and the Wi-Fi functionality is activated we don’t want to be running the Wi-Fi node wide open and granting unfettered access to your network. While the chances of this are next-to-nonexistent, it takes only a few seconds to apply the security measure so there’s little reason not to. Save your changes and navigate to Security ->Firewall. Uncheck everything but Filter Multicast Firewall Protect: Disable At this point you can save your changes again, review the changes you’ve made to ensure they all stuck, and then deploy your “new” switch wherever it is needed. Advanced Router to Switch Configuration For the advanced configuration, you’ll need a copy of DD-WRT installed on your router. Although doing so is an extra few steps, it gives you a lot more control over the process and liberates an extra port on the device. Hook the Wi-Fi router up to the network via one of the LAN ports (later you can switch the cable to the WAN port). Open the administration control panel via web browser on the connected computer. Navigate to the Setup -> Basic Setup tab to get started. In the Basic Setup tab, ensure the following settings are adjusted. The setting changes are not optional and are required to turn the Wi-Fi router into a switch. WAN Connection Type: Disabled Local IP Address: [different than the primary router, e.g. 192.168.1.2] Subnet Mask: [same as the primary router, e.g. 255.255.255.0] DHCP Server: Disable In addition to disabling the DHCP server, also uncheck all the DNSMasq boxes as the bottom of the DHCP sub-menu. If you want to activate the extra port (and why wouldn’t you), in the WAN port section: Assign WAN Port to Switch [X] At this point the router has become a switch and you have access to the WAN port so the LAN ports are all free. Since we’re already in the control panel, however, we might as well flip a few optional toggles that further lock down the switch and prevent something odd from happening. The optional settings are arranged via the menu you find them in. Remember to save your settings with the save button before moving onto a new tab. While still in the Setup -> Basic Setup menu, change the following: Gateway/Local DNS : [IP address of primary router, e.g. 192.168.1.1] NTP Client : Disable The next step is to turn off the radio completely (which not only kills the Wi-Fi but actually powers the physical radio chip off). Navigate to Wireless -> Advanced Settings -> Radio Time Restrictions: Radio Scheduling: Enable Select “Always Off” There’s no need to create a potential security problem by leaving the Wi-Fi radio on, the above toggle turns it completely off. Under Services -> Services: DNSMasq : Disable ttraff Daemon : Disable Under the Security -> Firewall tab, uncheck every box except “Filter Multicast”, as seen in the screenshot above, and then disable SPI Firewall. Once you’re done here save and move on to the Administration tab. Under Administration -> Management:  Info Site Password Protection : Enable Info Site MAC Masking : Disable CRON : Disable 802.1x : Disable Routing : Disable After this final round of tweaks, save and then apply your settings. Your router has now been, strategically, dumbed down enough to plod along as a very dependable little switch. Time to stuff it behind your desk or entertainment center and streamline your cabling.     

    Read the article

  • Connectivity issues with dual NIC machine in EC2

    - by Matt Sieker
    I'm trying to get some servers set up in EC2 in a Virtual Private Cloud. To do this, I have two subnets: 10.0.42.0/24 - Public subnet 10.0.83.0/24 - Private subnet To bridge these two, I have a Funtoo instance with a pair of NICs: eth0 10.0.42.10 eth1 10.0.83.10 Which has the following routing table: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.83.0 * 255.255.255.0 U 0 0 0 eth1 10.0.83.0 * 255.255.255.0 U 203 0 0 eth1 10.0.42.0 * 255.255.255.0 U 202 0 0 eth0 loopback * 255.0.0.0 U 0 0 0 lo default 10.0.42.1 0.0.0.0 UG 0 0 0 eth0 default 10.0.42.1 0.0.0.0 UG 202 0 0 eth0 An elastic IP is attached to the eth0 interface, and I can connect to it fine remotely. However, I cannot ping anything in the 10.0.83.0 subnet. For now iptables is not set up on the box, so there's no rules that would get in the way (Eventually this will be managed by Shorewall, but I should get basic connectivity done first) Subnet details from the VPC interface: CIDR: 10.0.83.0/24 Destination Target 10.0.0.0/16 local 0.0.0.0/0 [ID of eth1 on NAT box] Network ACL: Default Inbound: Rule # Port (Service) Protocol Source Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY Outbound: Rule # Port (Service) Protocol Destination Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY   CIDR: 10.0.83.0/24 VPC: Destination Target 10.0.0.0/16 local 0.0.0.0/0 [Internet Gateway ID] Network ACL: Default (replace) Inbound: Rule # Port (Service) Protocol Source Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY Outbound: Rule # Port (Service) Protocol Destination Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY I've been trying to work this out most of the evening, but I'm just stuck. I'm either missing something obvious, or am doing something very wrong. I would think I'd be able to ping from either interface on this box without issue. Hopefully some more pairs of eyes on this configuration will help. EDIT: I am an idiot. After I bothered to install nmap to run some more tests, I discover I can see the ports, and connect to them, pings are just being blocked.

    Read the article

  • c# Network Programming - HTTPWebRequest Scraping

    - by masterguru
    Hi, I am building a web scraping application. It should scrape a complex web site with concurrent HttpWebRequests from a single host to a single target web server. The application should run on Windows server 2008. One single HttpWebRequest for data could take from 1 minute to 4 minutes to complete (because of long running db operations) I should have at least 100 parallel requests to the target web server, but i have noticed that when i use more then 2-3 long-running requests i have big performance issues (request timeouts/hanging). How many concurrent requests can i have in this scenario from a single host to a single target web server? can i use Thread Pools in the application to run parallel HttpWebRequests to the server? will i have any issues with the default outbound HTTP connection/requests limits? what about Request timeouts when i reach outbound connection limits? what would be the best setup for my scenario? Any help would be appreciated. Thanks

    Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >