Search Results

Search found 2143 results on 86 pages for 'vpn'.

Page 28/86 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• Personal VPN Solutions

  - by dragonmantank

  I want to set up a VPN for my laptop to connect back at home so that I don't have to directly expose my desktop computer to the internet. Here is what I have: Internet -> DD-WRT v24sp1-mega -> Desktop PC w/ Windows 7 Ultimate -> MacBook w/ OSX 10.6 What would be the easiest thing to do? DD-WRT has PPTP and OpenVPN built in and Windows 7 has RRAS itself but thus far I've run into some problems. Are there any other alternatives, or suggestions on getting these to work? PPTP I tried setting up PPTP directly on DD-WRT using these directions. When I tried connecting using my external IP from the MacBook I just kept getting that the remote server did not respond. OpenVPN According to the instructions here I don't have enough open nvram to set up OpenVPN. RRAS I got RRAS set up without a problem and can connect from the MacBook to the Windows 7 box while I'm on the same network. I port forwarded 1723 on the DD-WRT back to the Windows 7 box and made sure that PPTP Passthrough was enabled. Again, like PPTP, it just kept timing out.

  Read the article

• Site to Site VPN with Fault Tolerence

  - by Nordberg

  Hello, I have a situation where I require an IPSEC tunnel between two sites. Site 2 is a small branch office with basic (ADSL) connectivity and Site 1 is the "main" office with SDSL and ADSL for redundancy should the SDSL fail. From Site 1, all traffic bound for the 172.0.0.0 network will then be sent down another IPSEC tunnel to a supplier's Remote Server. See this page for the basic premise (this is a rough idea and things can be moved about etc...) I am considering specifying Cisco ASA devices as the firewalls for both sites for all connections. Would it be possible to employ something like HSRC to provide a backup at Site 1 should the SDSL go down? I suppose the key aims here are that Site 2 can somehow failover to initiate a VPN to the ASA behind the ADSL at Site 1. I will have a 21 subnet mask on all internet connections so can play with Class C routing if need be... If I'm barking up the wrong tree with HSRC, is there another way I can acheive this without massive expenditure on Barracuda routers et al? Many Thanks.

  Read the article

• SNAT through Racoon IPSec VPN

  - by Mite fine d'ailes

  I am trying to route traffic from a device (that I will call "target") connected to my Ubuntu box (that I will call "host") to servers at a remote office. The host uses a Racoon IPSec VPN, connected through a NIC called efix. This creates an aliased IF called efix:0 which has IP adress 192.168.190.132. It is able to reach the servers. The link between host and target is an Ethernet link, using IP adresses 10.0.0.1 on IF eusb for the host and 10.0.0.2 on IF eth0 for the target. I have setup the following routes and iptables entries: On target: 10.0.0.0 * 255.255.255.0 U 0 0 0 eth0 default 10.0.0.1 0.0.0.0 UG 0 0 0 eth0 On host: echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -s 10.0.0.0/24 -j SNAT --to 192.168.190.132 iptables -A FORWARD -s 10.0.0.0/24 -j ACCEPT iptables -A FORWARD -d 10.0.0.0/24 -j ACCEPT Using Wireshark to monitor an HTTP GET, I can see SYN packets from the target go all the way to the server, but the server's SYNACK packets stop at the host and are not forwarded to the target. Am I missing something here ? Isn't SNAT supposed to keep track of the connections ?

  Read the article

• Trouble with local id / remote id configuration of VPN

  - by Lynn Owens

  I have a NetGear UTM firewall and a Windows machine running NetGear's VPN client. The Windows machine I can put on the UTM network and take off of it. When I am cabled into the local (internal) the following configuration works: UTM: Local Id: Local Wan IP: (The UTM's WAN IP address) Remote Id: User FQDN: utm_remote1.com Client: Local Id: DNS: utm_remote1.com Remote Id: (The UTM's WAN IP address) Gateway authentication: preshared key Policy remote endpoint: FQDN: utm_remote1.com But when I'm off the UTM's internal local network and simply coming in from the internet, this does not work. It simply repeats SEND phase 1 before giving up. Since I know that the UTM WAN IP is accessible from both inside and outside the network, I figured the problem was with the Client local id. So, I tried the following: UTM: Local Id: Local Wan IP: (The UTM's WAN IP address) Remote Id: (A DN of a self-signed certificate I created for the client and uploaded into the UTM certificates) Client: Local Id: (The DN of the aforementioned self signed cert) Remote Id: (The UTM's WAN IP address) Gateway authentication: (the aforementioned self signed cert) Policy remote end point: ... er, ... my choices are IP and FQDN.... Not sure what to put here No matter what I've tried, it just keeps repeating the SEND phase 1. Any ideas?

  Read the article

• CheckPoint/Amazon VPC VPN tunnel working inconsistently

  - by Lee

  First time poster, so please be gentle and correct me if there's Server Fault etiquette I'm missing. We have two CheckPoint edge devices at sites A & B, independently managed, connecting to two Amazon private clouds. In both cases, the two Amazon VPCs are in the same community on the CheckPoint device. A VPN tunnel exists between the two CheckPoint devices as well. Between Sites A & B and the Amazon VPC in Northern Virigina, we are unable to keep more than one tunnel up. Both will come up, but tunnel 2 will drop an hour after initiation and will not come back up while tunnel 1 is up. We believe the 1-hour period is due to IPsec phase 2 renegotiation, but can't be sure. On our side, we see the tunnel 2 remote endpoint as not responding to phase 2 negotiation. Between Sites A & B and the Amazon VPC in Oregon, we have no issues. Both tunnels are up and fail over properly. The CheckPoint gateways are using domain-based VPNs. According to CheckPoint's advice to Amazon, this won't work. Yet, in Oregon, it does. We've pursued this with Amazon and, despite the fact it's working in Oregon, they've refused to troubleshoot with us further. Can anyone suggest anything we can do to try to get this stabilized? Going to route-based VPNs is not an option for us.

  Read the article

• Alternate way to connect a vpn through a MIFI

  - by questor

  This has gotten to be a major problem at our company and depending on who I ask, the problem either does not really exist (mfr. and vendor) or is insoluble ( according to most users including techs who know how to prove their point). The problem involves getting a normal Windows 7 system to connect to a normal Server 2008 R2 Server over a cellular router (usually called a Mifi). A very few brands/models appear to work but the majority cannot make the connection. Since it is a cellular device, there are many variables that come into play and I wondered if anyone had ever found a consistent way to either make one work or else prove to the providers that their equipment was at fault. They all specifically state “VPN use” on the sales brochures. But few if any work. And those that do are not reliable. From a standpoint of pure knowledge, I just wondered if anyone knew the real reason why they fail? Pptp, L2tp, IPsec doesn’t matter. I have not tried Shrew or OpenVPN and am using strictly MS Windows protocols. Plenty of Google Searches back up my complaints but none seem to be any closer to knowing "why" they fail, just that they do. This is a "quest for knowledge"question. I don't expect a solution. Just a reason for the problem if anyone has any ideas.

  Read the article

• Configuring OS X L2TP VPN to use Certificate for IPSEC layer instead of Pre Shared Key

  - by Matthew Savage

  I'm trying to setup a L2TP VPN on an OS X Snow Leopard Server setup, and have had success using a pre-shared key, however I would rather not rely on a simple string, and use a certificate instead. Setting this up on the server side is seemingly easy, you simply select a certificate you have generated from the list, and hit apply, however when I try to use the certificate on the client side it fails. I have exported the certificate into a P12 file, and then transferred to the client, and imported into the login keychain, however when I try to choose the certificate (from Network preferences, clicking Authentication Settings, then selecting Certificate and pressing Select) I am shown the following error: No machine certificates found Certificate authentication cannot be used because your keychain does not contain any suitable certificates. Use Keychain Access to import the certificate into your keychain. If you do not have the certificates required for authentication, contact your network administrator. Unfortunately even when I try to generate a certificate where I override the defaults, ensure the DNS name etc are set properly this doesn't change. When I select Certificate Authentication for the User Auth, and click Select the certificate for the server shows up there, but obviously this isn't where I need it to be available.

  Read the article

• Domain joined computer unable to access servers through VPN

  - by kscott

  Our servers are in a virtual off site hosting center, our office has a vpn connection to the data center, but for reasons I don't understand we also have to connect to the Citrix Access Gateway (CAG) client in order to access the servers. I am a programmer with rather limited ops knowledge including a weak grasp of networking and terminology. Bear with me. I was just given a new laptop, which is a 64 bit Windows 7 system unlike my previous 32 bit Windows XP desktop which was able to connect without issue. My laptop has been joined to the domain so that I login with my AD credentials, I am able to connect to the CAG and get authenticated, and after doing this I can ping our servers and they resolve to the correct internal IP addresses, but I am unable to use remote desktop to the servers, connect to SQL servers through my local SQL Management Studio, navigate to them through the file system, or view any of our internal intranet websites. All of which I was able to do previously. I have tried turning off my Windows firewall and the problem remains, the DNS servers are set to the correct IPs of our domain controllers, and the ops guys here are a little stumped. Does any one have any suggestions?

  Read the article

• Unable to connect to cable modem when connected to VPN

  - by Spuas

  the scenario is as follows: First I have a cable modem which gives the internet connection. The network is 192.168.0.0/24 and its IP is 192.168.0.1 Second line, I have a router connected to the cable modem. Its "outside" IP is 192.168.0.12. This router creates network 192.168.123.0/24 and its IP there is 192.168.123.254. My computer is wired to the router with IP 192.168.123.126. At this point I am able to access both devices web interfaces by their IPs on a browser (192.168.123.254 for the router and 192.168.0.1 for the cable modem). The problem I have is when I connect to a VPN from the computer. Then I am connected to a second network 10.0.0.0/24 and I get IP 10.0.0.200 (along with 192.168.123.126). I can connect to the router but then I loose connectivity to the cable modem: I cannot acces it through the browser, neither making a ping to it or a tracert. I have tried to add a new route to the windows routes by typing route ADD 192.168.0.1 MASK 255.255.255.0 192.168.123.254 but I cannot access it anyway... Am I missing something on the route adding? Which is the propper way of doing this? Thanks

  Read the article

• Network to network VPN Centos 5

  - by Atul Kulkarni

  I am trying to follow "http://www.centos.org/docs/5/html/Deployment_Guide-en-US/ch-vpn.html#s1-ipsec-net2net" I have come up with the following On local router machine: in my ifcfg-ipsec0: ONBOOT=yes IKE_METHOD=PSK DSTGW=10.5.27.1 SRCGW=10.6.159.1 DSTNET=10.5.27.0/25 SRCNET=10.6.159.0/24 DST=205.X.X.X TYPE=IPSEC I have /etc/sysconfig/network-scripts/keys-ipsec0 file in place. On Remote Machine in the cloud if have /etc/sysconfig/network-scripts/ifcfg-ipsec1: TYPE=IPSEC ONBOOT=yes IKE_METHOD=PSK SRCGW=10.5.27.1 DSTGW=10.6.159.1 SRCNET=10.5.27.124/25 DSTNET=10.6.159.0/24 DST=38.x.x.x with its respective /etc/sysconfig/network-scripts/key-ipsec1 file. The DST in both cases are NAT'd external IPs. Is that a problem? I have made changes for port forwarding as well. When I try to bring the interfaces up it gives me output "RTNETLINK answers: Invalid argument". I am confused now and don't know what more to do? Any place I can digup what parameters were wrong? I really appreciate any help I can get. Thanks and Regards, Atul.

  Read the article

• L2TP over IPSec VPN with OpenSwan and XL2TPD can't connect, timeout on Centos 6

  - by Disco

  I'm setting up LT2p over IPSec on my Centos 6.3 fresh install. I have iptables flushed, permit all. Whenever I try to connect, i get a 'no reply from vpn' and nothi Here's my ipsec.conf file (Server is 1.2.3.4) : config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off protostack=netkey conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 rekey=no ikelifetime=8h keylife=1h type=transport left=1.2.3.4 leftprotoport=17/1701 right=%any rightprotoport=17/%any My /etc/ipsec.secrets 1.2.3.4 %any: PSK "password" My sysctl.conf (appened lines) net.ipv4.ip_forward = 1 net.ipv4.conf.default.rp_filter = 0 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 net.ipv4.conf.all.log_martians = 0 net.ipv4.conf.default.log_martians = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv4.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv4.icmp_ignore_bogus_error_responses = 1 Here's what 'ipsec verify' gives: # ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.32/K2.6.32-279.19.1.el6.x86_64 (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing for disabled ICMP send_redirects [OK] NETKEY detected, testing for disabled ICMP accept_redirects [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] And I see xl2tpd is listening on 1701/udp : udp 0 0 1.2.3.4:1701 0.0.0.0:* 2096/xl2tpd

  Read the article

• LogMeIn style remote access to NAS drive

  - by Mere Development

  I've been asked to setup some remote access to a NAS drive. The NAS drive will sit on a VLAN inside a network that uses a Cisco 891 IS router as gateway. The charity have no SSL-VPN licenses for the Cisco. At present there are no open ports or services on the Cisco itself and ideally we would like to keep it that way for a while, hence the request for a LogMeIn style service that's initiated from inside. We need multiple user access, about 10 max. Using LogMeIn on a machine connected to the NAS would only provide screen sharing I believe, and no concurrent connections (could be wrong?) The end users need to be able to read and write files to the NAS from Mac's and PC's around the globe. Read-only access from Mobile devices would be a bonus but not absolutely necessary. This is for a charity, non-commercial, but they are willing to spend if necessary. Cisco config knowledge is at a minimum so if I can avoid upsetting that delicate device I'll be happy :) Anyone have any clever ideas? I can provide more information on request. Thanks, Ben

  Read the article

• Amazon AWS VPN how to open a port?

  - by Victor Piousbox

  I have a VPN with public and private subnets; I am considering only public subnet for now. The node 10.0.0.23, I can ssh into it. Let's say I want to connect to MySQL on the node using its private address: ubuntu@ip-10-0-0-23:/$ mysql -u root -h 10.0.0.23 ERROR 2003 (HY000): Can't connect to MySQL server on '10.0.0.23' (111) ubuntu@ip-10-0-0-23:/$ mysql -u root -h localhost Welcome to the MySQL monitor. Commands end with ; or \g. --- 8< --- snip --- 8< --- mysql> The port 3306 is not reachable if I use the private IP? My security group allows port 3306 inbound from 0.0.0.0/0 AND from 10.0.0.0/24. Outbound, allowed all. The generic setup done by Amazon through their wizard does not work... I add ACL that allows everything for everybody, still does not work. What am I missing?

  Read the article

• Cisco ASA site-to-site vpn not initiating phase 1 (not sending udp 500 packets)

  - by Sean Steadman

  I am hoping someone here can help me with my problem. I am trying to setup an IPSEC site-to-site VPN between two cisco ASA 5520's in GNS3 (both using 8.4.2). I have been unsuccesful in getting the tunnel up and it appears neither ASA is sending packets out,in regards to phase 1 and phase 2 (tested by using wireshark and seeing NO udp 500 packets). Doing show ipsec sa and such shows nothing. CALIFORNIA(config)# show ipsec sa There are no ipsec sas FLA-ASA# show ipsec sa There are no ipsec sas I will attach both configurations in two different pastebin files as to keep this post a bit cleaner. Essentially California side has 172.20.1.0/24 and Florida side has 10.10.10.0/24. California ASA config: http://pastebin.com/v0pngYzF Florida ASA config: http://pastebin.com/E2geybta Please let me know if there is any other vital information that could help. I have gotten IPSEC tunnels to work using openSwan (linux) and cisco routers but cannot for the life of me get ASA IPSEC tunnels to work. The ASDM is out of the question I only use cli. Thanks for any useful help!

  Read the article

• Open an X application going through many hoops (SSH, vpn etc)

  - by ??O?????

  The players: my home computer, running Linux with an X server running. (Call it HOME.) a remote site, to which I can connect over the internet using a VPN. (SITE) a Linux computer at the remote site, to which I can connect with ssh -X and nicely have X clients displaying on my local server. (MIDDLE) a very old Irix machine (an Onyx) at the remote site, which has no SSH server (therefore I can't ssh -X to it), only an ssh client. (ONYX) Purpose I need to run an X11 application on the ONYX machine, and see the GUI on HOME. I think I stumble upon xauth issues. So far The current situation is: ? HOME connects to SITE ? A vncserver starts on MIDDLE:7 ? vncviewer on HOME connects to vncserver on MIDDLE ? ONYX starts a forwarding ssh session to MIDDLE: ssh -TfN -L 6007:127.0.0.1:6007 MIDDLE ? DISPLAY=localhost:7 xclient on ONYX fails with Xlib: connection to "127.0.0.1:7.0" refused by server I do know that the forwarding (6007:127.0.0.1:6007) succeeds. A previous attempt was: ? HOME connects to SITE ? HOME connects to MIDDLE: ssh -X MIDDLE (xclock displays on HOME, DISPLAY is 127.0.0.1:10) ? ONYX starts an SSH tunnel to MIDDLE: ssh -TfN -L 6010:127.0.0.1:6010 MIDDLE ? DISPLAY=127.0.0.1:10 xclient fails with X connection to 127.0.0.1:10.0 broken (explicit kill or server shutdown). while an error pops up in the MIDDLE session: X11 connection rejected because of wrong authentication. Despair How can I achieve my purpose?

  Read the article

• Windows VPN client connect on different port

  - by John Gardeniers

  Scenario: Two Windows Server 2003 machines running RRAS VPNs. The firewall port forwards 1723 to one of those machines for normal remote access. I'd like to find a way to connect to the second machine as well. Not because I need to but just because it's the sort of thing I reckon should be possible but can't figure out how to do. Is it possible to have the Windows PPTP VPN client (on XP in this instance) connect on a port other than 1723? If so, I can simply port forward another port to the second server. I've done a fair bit of Googling over the last few days and have only found others asking the same question but no answers. I have of course tried to add a port number in the host name or IP connection box, in various formats, but to no avail. While this might be possible with a third part client I'm really only interested in whether or not it can be done with the Windows built-in client and if so how?. Perhaps there's a registry hack I'm not aware of?

  Read the article

• Frequently getting booted from Securemote VPN-1 Connection

  - by Nick L.

  I connect to my office's network remotely through the Checkpoint SecuRemote E75 (R75) VPN application, but recently it's been causing me a lot of issues when connecting from home. I connect through a WRT54GL router running DD-WRT v24 firmware, so I have no clue if that affects anything. I took a dump of the logs for Checkpoint and here are the messages that populate when I get booted but I have no clue how to decipher them and my IT department is completely clueless in terms of resolving the situation. I'm thinking the router is blocking the keep alive connection or something along those lines, but I have no idea how to fix the problem. [ 2388 2932][30 Aug 22:47:49][TR_OFFICE_MODE] TR_OFFICE_MODE::TrOfficeMode::OmSendIpFrameCB: Not sending packet because it's not to the enc domain [ 2388 2932][30 Aug 22:47:50][TR_EVENTS] TR_EVENTS::Raise: Running registered cb... [ 2388 2932][30 Aug 22:47:50][TrComInf] TrComInf::TrComInfSendAsynchronic: __start__ 22:47:50.606 [ 2388 2932][30 Aug 22:47:50][TrComInf] TrComInf::TrComInf::TrComInfSendAsynchronic: Acquiring mutex [ 2388 2932][30 Aug 22:47:50][messaging] messaging::send_all: Sending Message {{ 2 }} , len 185 [ 2388 2932][30 Aug 22:47:50][tcpserver] TcpMultiPipe::pipe_if_send: Message (193 bytes) written successfully to socket 0x224 [ 2388 2932][30 Aug 22:47:50][TrComInf] TrComInf::TrComInf::TrComInfSendAsynchronic: Released mutex [ 2388 2932][30 Aug 22:47:50][TrComInf] TrComInf::TrComInfSendAsynchronic: __end__ 22:47:50.606. Total time - 0 milliseconds [ 2388 2932][30 Aug 22:47:50][TR_SRV2CL] TR_SRV2CL::SendNotification: Successfully sent notification of type TR_NOTIFICATION_TRAFFIC_IDLE [ 2388 2932][30 Aug 22:47:50][vna] vna_trap: received VNA_TRAP_FORWARD_PACKET [ 2388 2932][30 Aug 22:47:50][vna] vna_traffic_fwd_do : forwarding packet with 98 bytes [ 2388 2932][30 Aug 22:47:50][TR_OFFICE_MODE] TrOfficeMode::OmSendIpFrameCB: Packet to destination 192.168.162.15 of protocol 17 [ 2388 2932][30 Aug 22:47:50][TR_OFFICE_MODE] TR_OFFICE_MODE::TrOfficeMode::OmSendIpFrameCB: Not sending packet because it's not to the enc domain [ 2388 2932][30 Aug 22:47:51][vna] vna_trap: received VNA_TRAP_FORWARD_PACKET [ 2388 2932][30 Aug 22:47:51][vna] vna_traffic_fwd_do : forwarding packet with 98 bytes [ 2388 2932][30 Aug 22:47:51][TR_OFFICE_MODE] TrOfficeMode::OmSendIpFrameCB: Packet to destination 192.168.162.15 of protocol 17 [ 2388 2932][30 Aug 22:47:51][TR_OFFICE_MODE] TR_OFFICE_MODE::TrOfficeMode::OmSendIpFrameCB: Not sending packet because it's not to the enc domain [ 2388 2392][30 Aug 22:47:52][TracService] service_ctrl_ex: Called with ctrl_code 14 [ 2388 2392][30 Aug 22:47:52][TracService] service_ctrl_ex: System got SERVICE_CONTROL_SESSIONCHANGE message event type 4 session 2 [ 2388 2392][30 Aug 22:47:52][TracService] service_ctrl_ex: Console/remote disconnect has occured in session 2 [ 2388 2932][30 Aug 22:47:52][vna] vna_trap: received VNA_TRAP_FORWARD_PACKET [ 2388 2932][30 Aug 22:47:52][vna] vna_traffic_fwd_do : forwarding packet with 98 bytes [ 2388 2932][30 Aug 22:47:52][TR_OFFICE_MODE] TrOfficeMode::OmSendIpFrameCB: Packet to destination 192.168.162.15 of protocol 17 [ 2388 2932][30 Aug 22:47:52][TR_OFFICE_MODE] TR_OFFICE_MODE::TrOfficeMode::OmSendIpFrameCB: Not sending packet because it's not to the enc domain [ 2388 2932][30 Aug 22:47:52][TR_CONN_MANAGER] TR_CONN_MANAGER::ConnEnum: Returning connection at position 1 [ 2388 2932][30 Aug 22:47:52][TR_EVENTS] TR_EVENTS::Raise: Running registered cb... [ 2388 2932][30 Aug 22:47:52][TR_CONN_MANAGER] TR_CONN_MANAGER::ConnEventMainHandler: no gw handle [ 2388 2932][30 Aug 22:47:52][TR_CONN_MANAGER] TR_CONN_MANAGER::ConnEventMainHandler: Current connection state is TR_CONN_STATE_CONNECTED. Receiving event of type CONN_EVENT_SYSTEM_SESSION_LOGOFF. Connection handle = 1. System state: TR_SYSTEM_STATE_RUNNING [ 2388 2932][30 Aug 22:47:52][CONFIG_MANAGER] suspend_tunnel_while_locked return value false, because it is Default variable. Scope: site 12.43.159.10, gw NULL ,user USER [ 2388 2932][30 Aug 22:47:52][TR_CONN_MANAGER] TR_CONN_MANAGER::ConnEventConnectedHandler: no gw handle [ 2388 2932][30 Aug 22:47:52][TR_CONN_MANAGER] TR_CONN_MANAGER::ConnEventConnectedHandler: receive session logoff event while connected. cancelling connection Thanks all. :)

  Read the article

• Connecting debian and windows via IPsec VPN with Racoon and ipsec-tools

  - by Michi Qne

  I've some trouble with the IPsec configuration on my debian server (6 squeeze). This server should connect via IPsec VPN to an windows server, which is protected by an firewall. I've used racoon and ipsec-tools and this tutorial http://wiki.debian.org/IPsec. However, I am not quite sure, if this tutorial fits to my purpose, because of some differences: my Host and my gateway are the same server. So I don't have two different ip addresses. I guess, that's not a problem the other server is an windows system behind a firewall. Hopefully, not a problem the subnet of the windows system is /32 not /24. So I change it to /32. I worked through the tutorial step by step, but I wasn't able to route the ip. The following command didn't work for me: ip route add to 172.16.128.100/32 via XXX.XXX.XXX.XXX src XXX.XXX.XXX.XXX So I tried the following instead: ip route add to 172.16.128.100 .., which obviously not solved the problem. The next problem is the compression. The windows doesn't use a compression, but 'compression_algorithm none;' doesn't work with my racoon. So the current value is 'compression_algorithm deflate;' So my current result looks like this: When I am trying to ping the windows host (ping 172.16.128.100), I receive the following error message from ping: ping: sendmsg: Operation not permitted And racoon logs: racoon: ERROR: failed to get sainfo. After googling for a while I came to no conclusion, what's the solution. Does this error message mean that the first phase of IPsec works? I am thankful for any advice. I guess my configs might be helpful. My racoon.conf looks like this: path pre_shared_key "/etc/racoon/psk.txt"; remote YYY.YYY.YYY.YYY { exchange_mode main; proposal { lifetime time 8 hour; encryption_algorithm 3des; hash_algorithm sha1; authentication_method pre_shared_key; dh_group 2; } } sainfo address XXX.XXX.XXX.XXX/32 any address 172.16.128.100/32 any { pfs_group 2; lifetime time 8 hour; encryption_algorithm aes 256; authentication_algorithm hmac_sha1; compression_algorithm deflate; } And my ipsec-tools.conf looks like this: flush; spdflush; spdadd XXX.XXX.XXX.XXX/32 172.16.128.100/32 any -P out ipsec esp/tunnel/XXX.XXX.XXX.XXX-YYY.YYY.YYY.YYY/require; spdadd 172.16.128.100/32 XXX.XXX.XXX.XXX/32 any -P in ipsec esp/tunnel/YYY.YYY.YYY.YYY-XXX.XXX.XXX.XXX/require; If anyone has an advice, that would be awesome. Thanks in Advance. Greets, Michael It was a simple copy-and-paste error in an ip address.

  Read the article

• Recommended ADSL/ADSL2 router that supports PPTP VPN dial-out, 802.11n and gigabit ethernet?

  - by Throlkim

  I'm looking for a new router to provide a VPN tunnel for my home network. My plan is to pass all internet traffic over a PPTP VPN provided by the router, which should ensure that the connection stays alive and only passes traffic over that protocol. I'm normally quite a fan of Draytek routers, and their 2710n does seem to feature VPN dial-out but it lacks Gigabit ports (though I can make do with that if the VPN support is good enough). Has anyone got any suggestions or personal experience in a similar setup? I'm happy to consider anything that supports dd-wrt (as I believe that supports VPN-out, though I may be wrong). Bonus points for models available in the UK.

  Read the article

• Will being a VPN Client interrupt web pages hosted by IIS?

  - by f1gm3nt3d

  We have a dedicated server that is primarily used to host our website. I've been tasked with determining the feasibility of setting up a VPN connection from it to our Internal Network at our offices for a few ease of use purposes. My concern is that if I establish this VPN connection our Website will only be available internally and not to the internet in general. I'm concerned about this because in everything I read the fact is stated that by default all network traffic is routed over the VPN connection when it's established, is this also true for applications such as IIS that are listening for incoming connections? TL;DR Will having a VPN Client up and running cause a problem with server applications that may be listening on the NIC connected to the Internet due to changes that VPN makes in the routing tables?

  Read the article

• Windows 7 client can't connect to CentOS PPTP VPN

  - by Chris

  Have a Macintosh (10.8.2) that connects just fine to a CentOS 6.0 virtual private server (OpenVZ, with PPP added by the host) via PPTP. A Windows 7 Home Premium client (virtualized in Sun's Virtual Box), on the same computer, using the same Ethernet connection, cannot connect to the Linux VPN server. I have iptables disabled (for testing) on the Linux box. I have the Windows firewall turned off. /var/log/messages looks like this, for a Windows connection: Oct 12 18:44:30 production pptpd[1880]: CTRL: Client 66.104.246.168 control connection started Oct 12 18:44:30 production pptpd[1880]: CTRL: Starting call (launching pppd, opening GRE) Oct 12 18:44:30 production pppd[1881]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Oct 12 18:44:30 production pppd[1881]: pptpd-logwtmp: $Version$ Oct 12 18:44:30 production pppd[1881]: pppd options in effect: Oct 12 18:44:30 production pppd[1881]: debug#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: nologfd#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: dump#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: plugin /usr/lib/pptpd/pptpd-logwtmp.so#011#011# (from command line) Oct 12 18:44:30 production pppd[1881]: require-mschap-v2#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: refuse-pap#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: refuse-chap#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: refuse-mschap#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: name pptpd#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: pptpd-original-ip 66.104.246.168#011#011# (from command line) Oct 12 18:44:30 production pppd[1881]: 115200#011#011# (from command line) Oct 12 18:44:30 production pppd[1881]: lock#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: local#011#011# (from command line) Oct 12 18:44:30 production pppd[1881]: novj#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: novjccomp#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: ipparam 66.104.246.168#011#011# (from command line) Oct 12 18:44:30 production pppd[1881]: proxyarp#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: 192.168.97.1:192.168.97.10#011#011# (from command line) Oct 12 18:44:30 production pppd[1881]: nobsdcomp#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: require-mppe-128#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: mppe-stateful#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:44:30 production pppd[1881]: pppd 2.4.5 started by root, uid 0 Oct 12 18:44:30 production pppd[1881]: Using interface ppp0 Oct 12 18:44:30 production pppd[1881]: Connect: ppp0 <--> /dev/pts/1 (At this point the Windows machine displays a dialog, reading: "Verifying user name and password...") Oct 12 18:45:00 production pppd[1881]: LCP: timeout sending Config-Requests Oct 12 18:45:00 production pppd[1881]: Connection terminated. Oct 12 18:45:00 production pppd[1881]: Modem hangup Oct 12 18:45:00 production pppd[1881]: Exit. Oct 12 18:45:00 production pptpd[1880]: GRE: read(fd=6,buffer=8059660,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Oct 12 18:45:00 production pptpd[1880]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Oct 12 18:45:00 production pptpd[1880]: CTRL: Client 66.104.246.168 control connection finished The Macintosh connecting looks like this in /var/log/messages: Oct 12 18:50:49 production pptpd[1920]: CTRL: Client 66.104.246.168 control connection started Oct 12 18:50:49 production pptpd[1920]: CTRL: Starting call (launching pppd, opening GRE) Oct 12 18:50:49 production pppd[1921]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Oct 12 18:50:49 production pppd[1921]: pptpd-logwtmp: $Version$ Oct 12 18:50:49 production pppd[1921]: pppd options in effect: Oct 12 18:50:49 production pppd[1921]: debug#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: nologfd#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: dump#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: plugin /usr/lib/pptpd/pptpd-logwtmp.so#011#011# (from command line) Oct 12 18:50:49 production pppd[1921]: require-mschap-v2#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: refuse-pap#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: refuse-chap#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: refuse-mschap#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: name pptpd#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: pptpd-original-ip 66.104.246.168#011#011# (from command line) Oct 12 18:50:49 production pppd[1921]: 115200#011#011# (from command line) Oct 12 18:50:49 production pppd[1921]: lock#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: local#011#011# (from command line) Oct 12 18:50:49 production pppd[1921]: novj#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: novjccomp#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: ipparam 66.104.246.168#011#011# (from command line) Oct 12 18:50:49 production pppd[1921]: proxyarp#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: 192.168.97.1:192.168.97.10#011#011# (from command line) Oct 12 18:50:49 production pppd[1921]: nobsdcomp#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: require-mppe-128#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: mppe-stateful#011#011# (from /etc/ppp/options.pptpd) Oct 12 18:50:49 production pppd[1921]: pppd 2.4.5 started by root, uid 0 Oct 12 18:50:49 production pppd[1921]: Using interface ppp0 Oct 12 18:50:49 production pppd[1921]: Connect: ppp0 <--> /dev/pts/1 Oct 12 18:50:52 production pppd[1921]: MPPE 128-bit stateless compression enabled Oct 12 18:50:52 production pppd[1921]: Unsupported protocol 'IPv6 Control Protocol' (0x8057) received Oct 12 18:50:52 production pppd[1921]: Unsupported protocol 'Apple Client Server Protocol Control' (0x8235) received Oct 12 18:50:52 production pppd[1921]: Cannot determine ethernet address for proxy ARP Oct 12 18:50:52 production pppd[1921]: local IP address 192.168.97.1 Oct 12 18:50:52 production pppd[1921]: remote IP address 192.168.97.10 Oct 12 18:50:52 production pppd[1921]: pptpd-logwtmp.so ip-up ppp0 chris 66.104.246.168 I'm baffled...

  Read the article

• "custom" routers for VPN - useful or waste of money?

  - by Andrew Heath

  I use VPN in China and my current service contract expires soon so I was checking what sort of plans are out there now. I found that Witopia offers a "Cloak Box", what appears to be a Linksys wireless router with allegedly hacked/custom firmware to support VPN. Aside from allowing multiple computers to share one VPN connection, is there anything else at work here to justify that price when most new routers are $100 or less these days? Or is this something targeted towards the cd-rom cupholder crowd? And yes, I've contacted them, but haven't heard back yet... EDIT I've heard back from the company - here are the details if anyone else is interested: the router is a Linksys WRT54GL running TomatoVPN custom firmware the hardware waranty is one (1) year, from Linksys/Cisco the VPN is hard-set, so any device connected to the router MUST use the VPN (Witopia blocks torrents) I've decided it's not for me, but hopefully this information will prove useful to others.

  Read the article

• Site to site VPN using RRAS from an untrusted network?

  - by DrZaiusApeLord

  Our remote office will be moving to a new space where internet will be provided. They'll be behind a router doing NAT (I do not have admin rights to this router). They will be sharing a printer with the other people on the LAN, but will need VPN to our network for email and file shares. I was thinking of just having them run the windows VPN client and connecting via PPTP like they do when they are off-site, but I have read that multiple PPTP connections from the same NAT'd address to the same destination doesn't work well or at all. I am thinking some kind of site-to-site VPN is needed so there is just one tunnel. Can I just put in a VPN gateway, set it to connect to our RRAS/PPTP server, and have them use it as their default gateway? Perhaps even use the local default gateway for internet traffic. If so, what VPN gateway/device is recommended for this? Or other solutions? Thanks.

  Read the article

• How do I configure pfsense as an outbound VPN client?

  - by Avery Chan

  We use pfsense as a router/firewall. Because we're based in China, it is useful for us to have VPN access for all our internal clients. Instead of each individual client connecting to a VPN server stateside, I'd like to configure pfsense as a VPN client and have all the network traffic be routed through it. Most of the posts I've seen regarding pfsense and VPN are concerning connecting to the LAN from outside; this is not what I want to do. Another option would be for an SSH tunnel to be initiated on the pfsense box with the LAN traffic routed through it. How do I configure pfsense to be able to do either of these? One huge caveat is that OpenVPN cannot be used. The solution I am looking for needs to use one of the other VPN protocols.

  Read the article

• Windows 7 Built-In VPN - How to access network shares, printers, etc.?

  - by mbrion

  After I have successfully connected to a Windows 7 box via the built-in VPN: how do I access shares, shared printers, network appliances, etc.? So, call me bad at googling, but: I can find dozens of articles on "How to Set up a VPN Connection" and "How to connect to a VPN" for Windows 7... but I can't find a single article on how to access resources after connecting. I have a home VPN set up in Windows 7; I was able to connect to it from my friend's Windows 7 machine last night. I expected to be able to UNC into my shares; I also expected to be able to go to "Start Computer" and Click "Network" on the left side, and then see all of the devices on my home network (while the VPN was connected). Am I missing something obvious? How do I make this happen?

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >