Search Results

Search found 31075 results on 1243 pages for 'change'.

Page 282/1243 | < Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >

• WP7 “Phantom Data” Source Possibly Revealed?

  - by Bil Simser

  Recently there’s been rumours floating around regarding “phantom” Windows Phone 7 data being magically sent and received on the latest WP7 phones. The news has mostly been floating around twitter so I didn’t pay it much attention. The BBC Technology News picked it up so I thought I would look more into it myself seeing that we have WP7 phones and maybe there was some truth to all this (and more importantly what was the cause). Full disclosure. I don’t have a lot of data points around this. This is from looking at a few phone logs, changing the configuration and looking back again after the change. I haven’t done a clean baseline test nor have I done testing with hundreds of phones. I leave the experience up to the reader to decide. So I went spelunking into the phone logs to see what was up. Most providers will show you data usage, at least on a daily basis. I lucked out with the provider and plan in that they provide hourly breakdowns. Here’s a snapshot from my usage throughout one night. Timestamp Data Usage 12:38:30 AM 2098 Kilobytes 1:30:30 AM 2 Kilobytes 2:38:30 AM 7118 Kilobytes 3:38:30 AM 6622 Kilobytes 4:38:30 AM 76 Kilobytes 5:38:30 AM 29 Kilobytes 6:38:30 AM 19 Kilobytes 7:38:30 AM 20 Kilobytes So a few observations from this data: Data seems to be collected on a regular basis. Looking at some other people phone logs, the times vary but it’s always hourly. There’s not a tremendous amount of data here (about 16 megabytes) but it seems like a lot for 7 hours The phone was connected to my home Wifi during this period Nothing was running and the phone was in a locked state Like I said, not a lot of data but it adds up. 16MB for 7 hours = about 50MB in a 24 hour period. That’s just plain old data being collected (somewhere, somehow) and not actual usage (Marketplace, Email, Browsing, etc.). Besides, when connected to a WiFi network you shouldn’t be charged data usage from your phone company (in theory, YMMV). After reviewing the logs I made a theory that the only thing that could possibly be sending data is the Feedback feature. With no other apps running under lock, what else could it be? In Windows 7 under your Settings the last option is Feedback. This sends feedback to Microsoft to “help improve Windows Phone”. On this page you have three options: Send feedback and use my cellular data connection Send feedback and (presumably) use my WiFi connection Don’t send feedback Knowing what I know about Microsoft, they do use the feedback data. For example some of the placement and inclusion of features in Office 2007 was based on that Feedback data that Office sends (assuming you had opted in). However in the Privacy Statement (it’s long but a good read at least once in your life), the Phone manual, and every other source I could look at there is no information about how much data it’s planning to send, just that it’s sending some data and that “some data charges with your carrier may apply”. Looking back at the logs, I have to wonder. 6MB at 3:30 and *then* 7MB the next hour. That’s a lot of information. And it adds up. 50MB in a 24 hour period X 30 days puts most people over a normal 1GB plan. And frankly why am I paying for a data plan only to have 80% of it chewed up by Microsoft, with no real benefit to me. If they included porn in the 50mb daily transfer I’d be okay with this, but I don’t see any new movies on my phone. So I turned it off. Set Feedback to disabled and wait. I waited. And waited. And generally didn’t use the phone if I could. The next day I went back to look at the data usage logs from the time period after turning the feedback mechanism off. Here are the results. Timestamp Data Usage 1:19:48 PM 0 Kilobytes 2:19:48 PM 0 Kilobytes 3:19:48 PM 0 Kilobytes 4:19:48 PM 678 Kilobytes (took a phone call) 5:19:48 PM 82 Kilobytes 6:19:48 PM 88 Kilobytes 7:20:30 PM 86 Kilobytes (guess they changed their reporting time) 8:20:30 PM 86 Kilobytes 9:20:30 PM 66 Kilobytes 10:20:30 PM 67 Kilobytes 11:20:30 PM 49 Kilobytes 12:20:30 AM 32 Kilobytes 1:20:30 AM 38 Kilobytes 2:20:31 AM 18 Kilobytes 3:20:31 AM 27 Kilobytes 4:20:31 AM 86 Kilobytes 5:20:31 AM 53 Kilobytes 6:20:31 AM 22 Kilobytes 7:22:15 AM 30 Kilobytes (another reporting time change) 8:22:15 AM 29 Kilobytes 9:22:15 AM 74 Kilobytes 10:22:15 AM 154 Kilobytes (phone call) 11:22:15 AM 12 Kilobytes 12:13:27 PM 49 Kilobytes 1:13:27 PM 197 Kilobytes (phone call) Quite a *drastic* change from what Feedback was turned on. I mean for a 24 hour period (sans 3 phone calls) I consumed about 1MB. Still quite a bit of transfer going on but at least it amounts to 30MB per month, not 30MB per day! Like I said this observation is neither scientific or conclusive. You decide what to do but frankly until Microsoft makes this data transfer exempt from your data plan (like that will happen) I would just turn Feedback off. YMMV.

  Read the article

• Creating an ASP.NET report using Visual Studio 2010 - Part 2

  - by rajbk

  We continue building our report in this three part series. Creating an ASP.NET report using Visual Studio 2010 - Part 1 Creating an ASP.NET report using Visual Studio 2010 - Part 3 Creating the Client Report Definition file (RDLC) Add a folder called “RDLC”. This will hold our RDLC report.   Right click on the RDLC folder, select “Add new item..” and add an “RDLC” name of “Products”. We will use the “Report Wizard” to walk us through the steps of creating the RDLC.   In the next dialog, give the dataset a name called “ProductDataSet”. Change the data source to “NorthwindReports.DAL” and select “ProductRepository(GetProductsProjected)”. The fields that are returned from the method are shown on the right. Click next.   Drag and drop the ProductName, CategoryName, UnitPrice and Discontinued into the Values container. Note that you can create much more complex grouping using this UI. Click Next.   Most of the selections on this screen are grayed out because we did not choose a grouping in the previous screen. Click next. Choose a style for your report. Click next. The report graphic design surface is now visible. Right click on the report and add a page header and page footer. With the report design surface active, drag and drop a TextBox from the tool box to the page header. Drag one more textbox to the page header. We will use the text boxes to add some header text as shown in the next figure. You can change the font size and other properties of the textboxes using the formatting tool bar (marked in red). You can also resize the columns by moving your cursor in between columns and dragging. Adding Expressions Add two more text boxes to the page footer. We will use these to add the time the report was generated and page numbers. Right click on the first textbox in the page footer and select “Expression”. Add the following expression for the print date (note the = sign at the left of the expression in the dialog below) "© Northwind Traders " & Format(Now(),"MM/dd/yyyy hh:mm tt") Right click on the second text box and add the following for the page count.   Globals.PageNumber & " of " & Globals.TotalPages Formatting the page footer is complete.   We are now going to format the “Unit Price” column so it displays the number in currency format.  Right click on the [UnitPrice] column (not header) and select “Text Box Properties..” Under “Number”, select “Currency”. Hit OK. Adding a chart With the design surface active, go to the toolbox and drag and drop a chart control. You will need to move the product list table down first to make space for the chart contorl. The document can also be resized by dragging on the corner or at the page header/footer separator. In the next dialog, pick the first chart type. This can be changed later if needed. Click OK. The chart gets added to the design surface.   Click on the blue bars in the chart (not legend). This will bring up drop locations for dropping the fields. Drag and drop the UnitPrice and CategoryName into the top (y axis) and bottom (x axis) as shown below. This will give us the total unit prices for a given category. That is the best I could come up with as far as what report to render, sorry :-) Delete the legend area to get more screen estate. Resize the chart to your liking. Change the header, x axis and y axis text by double clicking on those areas. We made it this far. Let’s impress the client by adding a gradient to the bar graph :-) Right click on the blue bar and select “Series properties”. Under “Fill”, add a color and secondary color and select the Gradient style. We are done designing our report. In the next section you will see how to add the report to the report viewer control, bind to the data and make it refresh when the filter criteria are changed.   Creating an ASP.NET report using Visual Studio 2010 - Part 3

  Read the article

• Social Business Forum Milano: Day 2

  - by me

  @YourService. The business world has flipped and small business can capitalize  by Frank Eliason (twitter: @FrankEliason ) Technology and social media tools have made it easier than ever for companies to communicate with consumers. They can listen and join in on conversations, solve problems, get instant feedback about their products and services, and more. So why, then, are most companies not doing this? Instead, it seems as if customer service is at an all time low, and that the few companies who are choosing to focus on their customers are experiencing a great competitive advantage. At Your Service explains the importance of refocusing your business on your customers and your employees, and just how to do it. Explains how to create a culture of empowered employees who understand the value of a great customer experience Advises on the need to communicate that experience to their customers and potential customers Frank Eliason, recognized by BusinessWeek as the 'most famous customer service manager in the US, possibly in the world,' has built a reputation for helping large businesses improve the way they connect with customers and enhance their relationships Quotes from the Audience: Bertrand Duperrin ?@bduperrin social service is not about shutting up the loudest cutsomers ! #sbf12 @frankeliason Paolo Pelloni ?@paolopelloniGautam Ghosh ?@GautamGhosh RT @cecildijoux: #sbf12 @frankeliason you need to change things and fix the approach it's not about social media it's about driving change  Peter H. Reiser ?@peterreiser #sbf12 Company Experience = Product Experience + Customer Interactions + Employee Experience @yourservice Engage or lose! Socialize, mobilize, conversify: engage your employees to improve business performance Christian Finn (twitter: @cfinn) First Christian was presenting the flying monkey   Then he outlined the four principals to fix the Intranet: 1. Socalize the Intranet 2. Get Thee to a Single Repository 3. Mobilize the Intranet 4. Conversationalize Your Processes Quotes from the Audience: Oscar Berg ?@oscarberg Engaged employees think their work bring out the best of their ideas @cfinn #sbf12 http://pic.twitter.com/68eddp48 John Stepper ?@johnstepper I like @cfinn's "conversify your processes" A nice related concept to "narrating your work", part of working out loud. http://johnstepper.com/2012/05/26/working-out-loud-your-personal-content-strategy/ Oscar Berg ?@oscarberg Organizations are talent markets - socializing your intranet makes this market function better @cfinn #sbf12 For profit, productivity, and personal benefit: creating a collaborative culture at Deutsche Bank John Stepper (twitter:@johnstepper) Driving adoption of collaboration + social media platforms at Deutsche Bank. John shared some great best practices on how to deploy an enterprise wide  community model  in a large company. He started with the most important question What is the commercial value of adding social ? Then he talked about the success of Community of Practices deployment and outlined some key use cases including the relevant measures to proof the ROI of the investment. Examples:  Community of practice -> measure: systematic collection of value stories  Self-service website  -> measure: based on representative models Optimizing asset inventory - > measure: Actual counts  This use case was particular interesting.  It is a crowd sourced spending/saving of infrastructure model.  User can cancel IT services they don't need (as example Software xx).  5% of the saving goes to social responsibility projects. The John outlined some  best practices on how to address the WIIFM (What's In It For Me) question of the individual users:  - change from hierarchy to graph -  working out loud = observable work + narrating  your work  - add social skills to career objectives - example: building a purposeful social network course/training as part of the job development curriculum And last but not least John gave some important tips on how to get senior management buy-in by establishing management sponsored division level collaboration boards which defines clear uses cases and measures. This divisional use cases are then implemented using a common social platform.  Thanks John - I learned a lot from your presentation!   Quotes from the Audience: Ana Silva ?@AnaDataGirl #sbf12 what's in it for individuals at Deutsche Bank? Shapping their reputations in a big org says @johnstepper #e20Ana Silva ?@AnaDataGirl Any reason why not? MT @magatorlibero #sbf12 is Deutsche B. experience on applying social inside company applicable to Italian people? Oscar Berg ?@oscarberg Your career is not a ladder, it is a network that opens up opportunities - @johnstepper #sbf12 Oscar Berg ?@oscarberg @johnstepper: Institutionalizing collaboration is next - collaboration woven into the fabric of daily work #sbf12 Ana Silva ?@AnaDataGirl #sbf12 @johnstepper talking about how Deutsche Bank is using #socbiz to build purposeful CoP & save money

  Read the article

• To ref or not to ref

  - by nmarun

  So the question is what is the point of passing a reference type along with the ref keyword? I have an Employee class as below: 1: public class Employee 2: { 3: public string FirstName { get; set; } 4: public string LastName { get; set; } 5:  6: public override string ToString() 7: { 8: return string.Format("{0}-{1}", FirstName, LastName); 9: } 10: } In my calling class, I say: 1: class Program 2: { 3: static void Main() 4: { 5: Employee employee = new Employee 6: { 7: FirstName = "John", 8: LastName = "Doe" 9: }; 10: Console.WriteLine(employee); 11: CallSomeMethod(employee); 12: Console.WriteLine(employee); 13: } 14:  15: private static void CallSomeMethod(Employee employee) 16: { 17: employee.FirstName = "Smith"; 18: employee.LastName = "Doe"; 19: } 20: }   After having a look at the code, you’ll probably say, Well, an instance of a class gets passed as a reference, so any changes to the instance inside the CallSomeMethod, actually modifies the original object. Hence the output will be ‘John-Doe’ on the first call and ‘Smith-Doe’ on the second. And you’re right: So the question is what’s the use of passing this Employee parameter as a ref? 1: class Program 2: { 3: static void Main() 4: { 5: Employee employee = new Employee 6: { 7: FirstName = "John", 8: LastName = "Doe" 9: }; 10: Console.WriteLine(employee); 11: CallSomeMethod(ref employee); 12: Console.WriteLine(employee); 13: } 14:  15: private static void CallSomeMethod(ref Employee employee) 16: { 17: employee.FirstName = "Smith"; 18: employee.LastName = "Doe"; 19: } 20: } The output is still the same: Ok, so is there really a need to pass a reference type using the ref keyword? I’ll remove the ‘ref’ keyword and make one more change to the CallSomeMethod method. 1: class Program 2: { 3: static void Main() 4: { 5: Employee employee = new Employee 6: { 7: FirstName = "John", 8: LastName = "Doe" 9: }; 10: Console.WriteLine(employee); 11: CallSomeMethod(employee); 12: Console.WriteLine(employee); 13: } 14:  15: private static void CallSomeMethod(Employee employee) 16: { 17: employee = new Employee 18: { 19: FirstName = "Smith", 20: LastName = "John" 21: }; 22: } 23: } In line 17 you’ll see I’ve ‘new’d up the incoming Employee parameter and then set its properties to new values. The output tells me that the original instance of the Employee class does not change. Huh? But an instance of a class gets passed by reference, so why did the values not change on the original instance or how do I keep the two instances in-sync all the times? Aah, now here’s the answer. In order to keep the objects in sync, you pass them using the ‘ref’ keyword. 1: class Program 2: { 3: static void Main() 4: { 5: Employee employee = new Employee 6: { 7: FirstName = "John", 8: LastName = "Doe" 9: }; 10: Console.WriteLine(employee); 11: CallSomeMethod(ref employee); 12: Console.WriteLine(employee); 13: } 14:  15: private static void CallSomeMethod(ref Employee employee) 16: { 17: employee = new Employee 18: { 19: FirstName = "Smith", 20: LastName = "John" 21: }; 22: } 23: } Viola! Now, to prove it beyond doubt, I said, let me try with another reference type: string. 1: class Program 2: { 3: static void Main() 4: { 5: string name = "abc"; 6: Console.WriteLine(name); 7: CallSomeMethod(ref name); 8: Console.WriteLine(name); 9: } 10:  11: private static void CallSomeMethod(ref string name) 12: { 13: name = "def"; 14: } 15: } The output was as expected, first ‘abc’ and then ‘def’ - proves the 'ref' keyword works here as well. Now, what if I remove the ‘ref’ keyword? The output should still be the same as the above right, since string is a reference type? 1: class Program 2: { 3: static void Main() 4: { 5: string name = "abc"; 6: Console.WriteLine(name); 7: CallSomeMethod(name); 8: Console.WriteLine(name); 9: } 10:  11: private static void CallSomeMethod(string name) 12: { 13: name = "def"; 14: } 15: } Wrong, the output shows ‘abc’ printed twice. Wait a minute… now how could this be? This is because string is an immutable type. This means that any time you modify an instance of string, new memory address is allocated to the instance. The effect is similar to ‘new’ing up the Employee instance inside the CallSomeMethod in the absence of the ‘ref’ keyword. Verdict: ref key came to the rescue and saved the planet… again!

  Read the article

• MySQL Connector/Net 6.4.6 Maintenance Release has been released

  - by fernando

  MySQL Connector/Net 6.4.6, a new version of the all-managed .NET driver for MySQL has been released.  This is a maintenance release and is recommended for use in production environments. It is appropriate for use with MySQL server versions 5.0-5.6. This is intended to be the final release for Connector/NET 6.4. It is now available in source and binary form from http://dev.mysql.com/downloads/connector/net/#downloads and mirror sites (note that not all mirror sites may be up to date at this point-if you can't find this version on some mirror, please try again later or choose another download site.) The 6.4.6 version of MySQL Connector/Net brings the following fixes: - Fix for List.Contains generates a bunch of ORs instead of more efficient IN clause in   LINQ to Entities (Oracle bug #14016344, MySql bug #64934). - Fix for error when trying to change the name of an Index on the Indexes/Keys editor; along with this fix now users can change the Index type of a new Index which could not be done   in previous versions, and when changing the Index name the change is reflected on the list view at the left side of the Index/Keys editor (Oracle bug #13613801). - Fix for stored procedure call using only its name with EF code first (MySql bug #64999, Oracle bug #14008699). - Fix for performance issue in generated EF query: .NET StartsWith/Contains/EndsWith produces MySql's locate instead of Like (MySql bug #64935, Oracle bug #14009363). - Fix for script generated for code first contains wrong alter table and wrong declaration for byte[] (MySql bug #64216, Oracle bug #13900091). - Fix for Exception thrown when using cascade delete in an EDM Model-First in Entity Framework (Oracle bug #14008752, MySql bug #64779). - Fix for Session locking issue with MySqlSessionStateStore (MySql bug #63997, Oracble bug #13733054). - Fixed deleting a user profile using Profile provider (MySQL bug #64409, Oracle bug #13790123). - Fix for bug Cannot Create an Entity with a Key of Type String (MySQL bug #65289, Oracle bug #14540202). This fix checks if the type has a FixedLength facet set in order to create a char otherwise should create varchar, mediumtext or longtext types when using a String CLR type in Code First or Model First also tested in Database First. Unit tests added for Code First and ProviderManifest. - Fix for bug "CacheServerProperties can cause 'Packet too large' error" (MySQL Bug #66578 Orabug #14593547). - Fix for handling unnamed parameter in MySQLCommand. This fix allows the mysqlcommand to handle parameters without requiring naming (e.g. INSERT INTO Test (id,name) VALUES (?, ?) ) (MySQL Bug #66060, Oracle bug #14499549). - Fixed inheritance on Entity Framework Code First scenarios. Discriminator column is created using its correct type as varchar(128) (MySql bug #63920 and Oracle bug #13582335). - Fixed "Trying to customize column precision in Code First does not work" (MySql bug #65001, Oracle bug #14469048). - Fixed bug ASP.NET Membership database fails on MySql database UTF32 (MySQL bug #65144, Oracle bug #14495292). - Fix for MySqlCommand.LastInsertedId holding only 32 bit values (MySql bug #65452, Oracle bug #14171960) by changing   several internal declaration of lastinsertid from int to long. - Fixed "Decimal type should have digits at right of decimal point", now default is 2, but user's changes in   EDM designer are recognized (MySql bug #65127, Oracle bug #14474342). - Fix for NullReferenceException when saving an uninitialized row in Entity Framework (MySql bug #66066, Oracle bug #14479715). - Fix for error when calling RoleProvider.RemoveUserFromRole(): causes an exception due to a wrong table being used (MySql bug #65805, Oracle bug #14405338). - Fix for "Memory Leak on MySql.Data.MySqlClient.MySqlCommand", too many MemoryStream's instances created (MySql bug #65696, Oracle bug #14468204). - Small improvement on MySqlPoolManager CleanIdleConnections for better mysqlpoolmanager idlecleanuptimer at startup (MySql bug #66472 and Oracle bug #14652624). - Fix for bug TIMESTAMP values are mistakenly represented as DateTime with Kind = Local (Mysql bug #66964, Oracle bug #14740705). - Fix for bug Keyword not supported. Parameter name: AttachDbFilename (Mysql bug #66880, Oracle bug #14733472). - Added support to MySql script file to retrieve data when using "SHOW" statements. - Fix for Package Load Failure in Visual Studio 2005 (MySql bug #63073, Oracle bug #13491674). - Fix for bug "Unable to connect using IPv6 connections" (MySQL bug #67253, Oracle bug #14835718). - Added auto-generated values for Guid identity columns (MySql bug #67450, Oracle bug #15834176). - Fix for method FirstOrDefault not supported in some LINQ to Entities queries (MySql bug #67377, Oracle bug #15856964). The release is available to download at http://dev.mysql.com/downloads/connector/net/6.4.html Documentation ------------------------------------- You can view current Connector/Net documentation at http://dev.mysql.com/doc/refman/5.5/en/connector-net.html You can find our team blog at http://blogs.oracle.com/MySQLOnWindows. You can also post questions on our forums at http://forums.mysql.com/. Enjoy and thanks for the support!

  Read the article

• Migrating SQL Server Databases – The DBA’s Checklist (Part 2)

  - by Sadequl Hussain

  Continuing from Part 1  , our Migration Checklist continues: Step 5: Update statistics It is always a good idea to update the statistics of the database that you have just installed or migrated. To do this, run the following command against the target database: sp_updatestats The sp_updatestats system stored procedure runs the UPDATE STATISTICS command against every user and system table in the database.  However, a word of caution: running the sp_updatestats against a database with a compatibility level below 90 (SQL Server 2005) will reset the automatic UPDATE STATISTICS settings for every index and statistics of every table in the database. You may therefore want to change the compatibility mode before you run the command. Another thing you should remember to do is to ensure the new database has its AUTO_CREATE_STATISTICS and AUTO_UPDATE_STATISTICS properties set to ON. You can do so using the ALTER DATABASE command or from the SSMS. Step 6: Set database options You may have to change the state of a database after it has been restored. If the database was changed to single-user or read-only mode before backup, the restored copy will also retain these settings. This may not be an issue when you are manually restoring from Enterprise Manager or the Management Studio since you can change the properties. However, this is something to be mindful of if the restore process is invoked by an automated job or script and the database needs to be written to immediately after restore. You may want to check the database’s status programmatically in such cases. Another important option you may want to set for the newly restored / attached database is PAGE_VERIFY. This option specifies how you want SQL Server to ensure the physical integrity of the data. It is a new option from SQL Server 2005 and can have three values: CHECKSUM (default for SQL Server 2005 and latter databases), TORN_PAGE_DETECTION (default when restoring a pre-SQL Server 2005 database) or NONE. Torn page detection was itself an option for SQL Server 2000 databases. From SQL Server 2005, when PAGE_VERIFY is set to CHECKSUM, the database engine calculates the checksum for a page’s contents and writes it to the page header before storing it in disk. When the page is read from the disk, the checksum is computed again and compared with the checksum stored in the header.  Torn page detection works much like the same way in that it stores a bit in the page header for every 512 byte sector. When data is read from the page, the torn page bits stored in the header is compared with the respective sector contents. When PAGE_VERIFY is set to NONE, SQL Server does not perform any checking, even if torn page data or checksums are present in the page header.  This may not be something you would want to set unless there is a very specific reason.  Microsoft suggests using the CHECKSUM page verify option as this offers more protection. Step 7: Map database users to logins A common database migration issue is related to user access. Windows and SQL Server native logins that existed in the source instance and had access to the database may not be present in the destination. Even if the logins exist in the destination, the mapping between the user accounts and the logins will not be automatic. You can use a special system stored procedure called sp_change_users_login to address these situations. The procedure needs to be run against the newly attached or restored database and can accept four parameters. Depending on what you want to do, you may be using less than four though. The first parameter, @Action, can take three values. When you specify @Action = ‘Report’, the system will provide you with a list of database users which are not mapped to any login. If you want to map a database user to an existing SQL Server login, the value for @Action will be ‘Update_One’. In this case, you will only need to provide the database user name and the login it will map to. So if your newly restored database has a user account called “bob” and there is already a SQL Server login with the same name and you want to map the user to the login, you will execute a query like the following: sp_change_users_login         @Action = ‘Update_One’,         @UserNamePattern = ‘bob’,         @LoginName = ‘bob’ If the login does not exist, you can instruct SQL Server to create the login with the same name. In this case you will need to provide a password for the login and the value of the @Action parameter will be ‘Auto_Fix’. If the login already exists, it will be automatically mapped to the user account. Unfortunately sp_change_users_login system stored procedure cannot be used to map database users to trusted logins (Windows accounts) in SQL Server. You will need to follow a manual process to re-map the database user accounts.  Continues…

  Read the article

• SSH error: Permission denied, please try again

  - by Kamal

  I am new to ubuntu. Hence please forgive me if the question is too simple. I have a ubuntu server setup using amazon ec2 instance. I need to connect my desktop (which is also a ubuntu machine) to the ubuntu server using SSH. I have installed open-ssh in ubuntu server. I need all systems of my network to connect the ubuntu server using SSH (no need to connect through pem or pub keys). Hence opened SSH port 22 for my static IP in security groups (AWS). My SSHD-CONFIG file is: # Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for Port 22 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key HostKey /etc/ssh/ssh_host_ecdsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel INFO # Authentication: LoginGraceTime 120 PermitRootLogin yes StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords #PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM yes Through webmin (Command shell), I have created a new user named 'senthil' and added this new user to 'sudo' group. sudo adduser -y senthil sudo adduser senthil sudo I tried to login using this new user 'senthil' in 'webmin'. I was able to login successfully. When I tried to connect ubuntu server from my terminal through SSH, ssh senthil@SERVER_IP It asked me to enter password. After the password entry, it displayed: Permission denied, please try again. On some research I realized that, I need to monitor my server's auth log for this. I got the following error in my auth log (/var/log/auth.log) Jul 2 09:38:07 ip-192-xx-xx-xxx sshd[3037]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=MY_CLIENT_IP user=senthil Jul 2 09:38:09 ip-192-xx-xx-xxx sshd[3037]: Failed password for senthil from MY_CLIENT_IP port 39116 ssh2 When I tried to debug using: ssh -v senthil@SERVER_IP OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Connecting to SERVER_IP [SERVER_IP] port 22. debug1: Connection established. debug1: identity file {MY-WORKSPACE}/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: identity file {MY-WORKSPACE}/.ssh/id_rsa-cert type -1 debug1: identity file {MY-WORKSPACE}/.ssh/id_dsa type -1 debug1: identity file {MY-WORKSPACE}/.ssh/id_dsa-cert type -1 debug1: identity file {MY-WORKSPACE}/.ssh/id_ecdsa type -1 debug1: identity file {MY-WORKSPACE}/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA {SERVER_HOST_KEY} debug1: Host 'SERVER_IP' is known and matches the ECDSA host key. debug1: Found key in {MY-WORKSPACE}/.ssh/known_hosts:1 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: password debug1: Next authentication method: password senthil@SERVER_IP's password: debug1: Authentications that can continue: password Permission denied, please try again. senthil@SERVER_IP's password: For password, I have entered the same value which I normally use for 'ubuntu' user. Can anyone please guide me where the issue is and suggest some solution for this issue?

  Read the article

• MySQL Connector/Net 6.5.5 Maintenance Release has been released

  - by fernando

  MySQL Connector/Net 6.5.5, a new maintenance release of our 6.5 series, has been released.  This release is GA quality and is appropriate for use in production environments.  Please note that 6.6 is our latest driver series and is the recommended product for development. It is now available in source and binary form from http://dev.mysql.com/downloads/connector/net/#downloads and mirror sites (note that not all mirror sites may be up to date at this point-if you can't find this version on some mirror, please try again later or choose another download site.) The 6.5.5 version of MySQL Connector/Net brings the following fixes: - Fix for ArgumentNull exception when using Take().Count() in a LINQ to Entities query (bug MySql #64749, Oracle bug #13913047). - Fix for type varchar changed to bit when saving in Table Designer (Oracle bug #13916560). - Fix for error when trying to change the name of an Index on the Indexes/Keys editor; along with this fix now users can change the Index type of a new Index which could not be done   in previous versions, and when changing the Index name the change is reflected on the list view at the left side of the Index/Keys editor (Oracle bug #13613801). - Fix for stored procedure call using only its name with EF code first (MySql bug #64999, Oracle bug #14008699). - Fix for List.Contains generates a bunch of ORs instead of more efficient IN clause in   LINQ to Entities (Oracle bug #14016344, MySql bug #64934). - Fix for performance issue in generated EF query: .NET StartsWith/Contains/EndsWith produces MySql's locate instead of Like (MySql bug #64935, Oracle bug #14009363). - Fix for script generated for code first contains wrong alter table and wrong declaration for byte[] (MySql bug #64216, Oracle bug #13900091). - Fix and code contribution for bug Timed out sessions are removed without notification which allow to enable the Expired CallBack when Session Provider times out any session (bug MySql #62266 Oracle bug # 13354935) - Fix for Exception thrown when using cascade delete in an EDM Model-First in Entity Framework (Oracle bug #14008752, MySql bug #64779). - Fix for Session locking issue with MySqlSessionStateStore (MySql bug #63997, Oracble bug #13733054). - Fixed deleting a user profile using Profile provider (MySQL bug #64470, Oracle bug #13790123) - Fix for bug Cannot Create an Entity with a Key of Type String (MySQL bug #65289, Oracle bug #14540202). This fix checks if the type has a FixedLength facet set in order to create a char otherwise should create varchar, mediumtext or longtext types when using a String CLR type in Code First or Model First also tested in Database First. Unit tests added for Code First and ProviderManifest. - Fix for bug "CacheServerProperties can cause 'Packet too large' error". The issue was due to a missing reading of Max_allowed_packet server property when CacheServerProperties is in true, since the value was read only in the first connection but the following pooled connections had a wrong value causing a Packet too large error. Including also a unit test for this scenario. All unit test passed. MySQL Bug #66578 Orabug #14593547. - Fix for handling unnamed parameter in MySQLCommand. This fix allows the mysqlcommand to handle parameters without requiring naming (e.g. INSERT INTO Test (id,name) VALUES (?, ?) ) (MySQL Bug #66060, Oracle bug #14499549). - Fixed inheritance on Entity Framework Code First scenarios. Discriminator column is created using its correct type as varchar(128) (MySql bug #63920 and Oracle bug #13582335). - Fixed "Trying to customize column precision in Code First does not work" (MySql bug #65001, Oracle bug #14469048). - Fixed bug ASP.NET Membership database fails on MySql database UTF32 (MySQL bug #65144, Oracle bug #14495292). - Fix for MySqlCommand.LastInsertedId holding only 32 bit values (MySql bug #65452, Oracle bug #14171960) by changing   several internal declaration of lastinsertid from int to long. - Fixed "Decimal type should have digits at right of decimal point", now default is 2, but user's changes in   EDM designer are recognized (MySql bug #65127, Oracle bug #14474342). - Fix for NullReferenceException when saving an uninitialized row in Entity Framework (MySql bug #66066, Oracle bug #14479715). - Fix for error when calling RoleProvider.RemoveUserFromRole(): causes an exception due to a wrong table being used (MySql bug #65805, Oracle bug #14405338). - Fix for "Memory Leak on MySql.Data.MySqlClient.MySqlCommand", too many MemoryStream's instances created (MySql bug #65696, Oracle bug #14468204). - Added ANTLR attribution notice (Oracle bug #14379162). - Fixed Entity Framework + mysql connector/net in partial trust throws exceptions (MySql bug #65036, Oracle bug #14668820). - Added support in Parser for Datetime and Time types with precision when using Server 5.6 (No bug Number). - Small improvement on MySqlPoolManager CleanIdleConnections for better mysqlpoolmanager idlecleanuptimer at startup (MySql bug #66472 and Oracle bug #14652624). - Fix for bug TIMESTAMP values are mistakenly represented as DateTime with Kind = Local (Mysql bug #66964, Oracle bug #14740705). - Fix for bug Keyword not supported. Parameter name: AttachDbFilename (Mysql bug #66880, Oracle bug #14733472). - Added support to MySql script file to retrieve data when using "SHOW" statements. - Fix for Package Load Failure in Visual Studio 2005 (MySql bug #63073, Oracle bug #13491674). - Fix for bug "Unable to connect using IPv6 connections" (MySQL bug #67253, Oracle bug #14835718). - Added auto-generated values for Guid identity columns (MySql bug #67450, Oracle bug #15834176). - Fix for method FirstOrDefault not supported in some LINQ to Entities queries (MySql bug #67377, Oracle bug #15856964). The release is available to download at http://dev.mysql.com/downloads/connector/net/6.5.html Documentation ------------------------------------- You can view current Connector/Net documentation at http://dev.mysql.com/doc/refman/5.5/en/connector-net.html You can find our team blog at http://blogs.oracle.com/MySQLOnWindows. You can also post questions on our forums at http://forums.mysql.com/. Enjoy and thanks for the support! 

  Read the article

• Check Your Spelling, Grammar, and Style in Firefox and Chrome

  - by Matthew Guay

  Are you tired of making simple writing mistakes that get past your browser’s spell-check?  Here’s how you can get advanced grammar check and more in Firefox and Chrome with After the Deadline. Microsoft Word has spoiled us with grammar, syntax, and spell checking, but the default spell check in Firefox and Chrome still only does basic checks.  Even webapps like Google Docs don’t check more than basic spelling errors.  However, WordPress.com is an exception; it offers advanced spelling, grammar, and syntax checking with its After the Deadline proofing system.  This helps you keep from making embarrassing mistakes on your blog posts, and now, thanks to a couple free browser plugins, it can help you keep from making these mistakes in any website or webapp. After the Deadline in Google Chrome Add the After the Deadline extension (link below) to Chrome as usual. As soon as it’s installed, you’re ready to start improving your online writing.  To check spelling, grammar, and more, click the ABC button that you’ll now see at the bottom of most text boxes online. After a quick scan, grammar mistakes are highlighted in green, complex expressions and other syntax problems are highlighted in blue, and spelling mistakes are highlighted in red as would be expected.  Click on an underlined word to choose one of its recommended changes or ignore the suggestion. Or, if you want more explanation about what was wrong with that word or phrase, click Explain for more info. And, if you forget to run an After the Deadline scan before submitting a text entry, it will automatically check to make sure you still want to submit it.  Click Cancel to go back and check your writing first.   To change the After the Deadline settings, click its icon in the toolbar and select View Options.  Additionally, if you want to disable it on the site you’re on, you can click Disable on this site directly from the popup. From the settings page, you can choose extra things to check for such as double negatives and redundant phrases, as well as add sites and words to ignore. After the Deadline in Firefox Add the After the Deadline add-on to Firefox (link below) as normal. After the Deadline basically the same in Firefox as it does in Chrome.  Select the ABC icon in the lower right corner of textboxes to check them for problems, and After the Deadline will underline the problems as it did in Chrome.  To view a suggested change in Firefox, right-click on the underlined word and select the recommended change or ignore the suggestion. And, if you forget to check, you’ll see a friendly reminder asking if you’re sure you want to submit your text like it is. You can access the After the Deadline settings in Firefox from the menu bar.  Click Tools, then select AtD Preferences.  In Firefox, the settings are in a options dialog with three tabs, but it includes the same options as the Chrome settings page.  Here you can make After the Deadline as correction-happy as you like.   Conclusion The web has increasingly become an interactive place, and seldom does a day go by that we aren’t entering text in forms and comments that may stay online forever.  Even our insignificant tweets are being archived in the Library of Congress.  After the Deadline can help you make sure that your permanent internet record is as grammatically correct as possible.  Even though it doesn’t catch every problem, and even misses some spelling mistakes, it’s still a great help. Links Download the After the Deadline extension for Google Chrome Download the After the Deadline add-on for Firefox Similar Articles Productive Geek Tips Quick Tip: Disable Favicons in FirefoxStupid Geek Tricks: Duplicate a Tab with a Shortcut Key in Chrome or FirefoxHow to Disable the New Geolocation Feature in Google ChromeStupid Geek Tricks: Compare Your Browser’s Memory Usage with Google ChromeStop YouTube Videos from Automatically Playing in Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Easily Search Food Recipes With Recipe Chimp Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools

  Read the article

• openGL migration from SFML to glut, vertices arrays or display lists are not displayed

  - by user3714670

  Due to using quad buffered stereo 3D (which i have not included yet), i need to migrate my openGL program from a SFML window to a glut window. With SFML my vertices and display list were properly displayed, now with glut my window is blank white (or another color depending on the way i clear it). Here is the code to initialise the window : int type; int stereoMode = 0; if ( stereoMode == 0 ) type = GLUT_DOUBLE | GLUT_RGB | GLUT_DEPTH; else type = GLUT_DOUBLE | GLUT_RGB | GLUT_DEPTH | GLUT_STEREO; glutInitDisplayMode(type); int argc = 0; char *argv = ""; glewExperimental = GL_TRUE; glutInit(&argc, &argv); bool fullscreen = false; glutInitWindowSize(width,height); int win = glutCreateWindow(title.c_str()); glutSetWindow(win); assert(win != 0); if ( fullscreen ) { glutFullScreen(); width = glutGet(GLUT_SCREEN_WIDTH); height = glutGet(GLUT_SCREEN_HEIGHT); } GLenum err = glewInit(); if (GLEW_OK != err) { fprintf(stderr, "Error: %s\n", glewGetErrorString(err)); } glutDisplayFunc(loop_function); This is the only code i had to change for now, but here is the code i used with sfml and displayed my objects in the loop, if i change the value of glClearColor, the window's background does change color : glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glClearColor(255.0f, 255.0f, 255.0f, 0.0f); glLoadIdentity(); sf::Time elapsed_time = clock.getElapsedTime(); clock.restart(); camera->animate(elapsed_time.asMilliseconds()); camera->look(); for (auto i = objects->cbegin(); i != objects->cend(); ++i) (*i)->draw(camera); glutSwapBuffers(); Is there any other changes i should have done switching to glut ? that would be great if someone could enlighten me on the subject. In addition to that, i found out that adding too many objects (that were well handled before with SFML), openGL gives error 1285: out of memory. Maybe this is related. EDIT : Here is the code i use to draw each object, maybe it is the problem : GLuint LightID = glGetUniformLocation(this->shaderProgram, "LightPosition_worldspace"); if(LightID ==-1) cout << "LightID not found ..." << endl; GLuint MaterialAmbientID = glGetUniformLocation(this->shaderProgram, "MaterialAmbient"); if(LightID ==-1) cout << "LightID not found ..." << endl; GLuint MaterialSpecularID = glGetUniformLocation(this->shaderProgram, "MaterialSpecular"); if(LightID ==-1) cout << "LightID not found ..." << endl; glm::vec3 lightPos = glm::vec3(0,150,150); glUniform3f(LightID, lightPos.x, lightPos.y, lightPos.z); glUniform3f(MaterialAmbientID, MaterialAmbient.x, MaterialAmbient.y, MaterialAmbient.z); glUniform3f(MaterialSpecularID, MaterialSpecular.x, MaterialSpecular.y, MaterialSpecular.z); // Get a handle for our "myTextureSampler" uniform GLuint TextureID = glGetUniformLocation(shaderProgram, "myTextureSampler"); if(!TextureID) cout << "TextureID not found ..." << endl; glActiveTexture(GL_TEXTURE0); sf::Texture::bind(texture); glUniform1i(TextureID, 0); // 2nd attribute buffer : UVs GLuint vertexUVID = glGetAttribLocation(shaderProgram, "color"); if(vertexUVID==-1) cout << "vertexUVID not found ..." << endl; glEnableVertexAttribArray(vertexUVID); glBindBuffer(GL_ARRAY_BUFFER, color_array_buffer); glVertexAttribPointer(vertexUVID, 2, GL_FLOAT, GL_FALSE, 0, 0); GLuint vertexNormal_modelspaceID = glGetAttribLocation(shaderProgram, "normal"); if(!vertexNormal_modelspaceID) cout << "vertexNormal_modelspaceID not found ..." << endl; glEnableVertexAttribArray(vertexNormal_modelspaceID); glBindBuffer(GL_ARRAY_BUFFER, normal_array_buffer); glVertexAttribPointer(vertexNormal_modelspaceID, 3, GL_FLOAT, GL_FALSE, 0, 0 ); GLint posAttrib; posAttrib = glGetAttribLocation(shaderProgram, "position"); if(!posAttrib) cout << "posAttrib not found ..." << endl; glEnableVertexAttribArray(posAttrib); glBindBuffer(GL_ARRAY_BUFFER, position_array_buffer); glVertexAttribPointer(posAttrib, 3, GL_FLOAT, GL_FALSE, 0, 0); glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, elements_array_buffer); glDrawElements(GL_TRIANGLES, indices.size(), GL_UNSIGNED_INT, 0); GLuint error; while ((error = glGetError()) != GL_NO_ERROR) { cerr << "OpenGL error: " << error << endl; } disableShaders();

  Read the article

• Part 2&ndash;Load Testing In The Cloud

  - by Tarun Arora

  Welcome to Part 2, In Part 1 we discussed the advantages of creating a Test Rig in the cloud, the Azure edge and the Test Rig Topology we want to get to. In Part 2, Let’s start by understanding the components of Azure we’ll be making use of followed by manually putting them together to create the test rig, so… let’s get down dirty start setting up the Test Rig.  What Components of Azure will I be using for building the Test Rig in the Cloud? To run the Test Agents we’ll make use of Windows Azure Compute and to enable communication between Test Controller and Test Agents we’ll make use of Windows Azure Connect.  Azure Connect The Test Controller is on premise and the Test Agents are in the cloud (How will they talk?). To enable communication between the two, we’ll make use of Windows Azure Connect. With Windows Azure Connect, you can use a simple user interface to configure IPsec protected connections between computers or virtual machines (VMs) in your organization’s network, and roles running in Windows Azure. With this you can now join Windows Azure role instances to your domain, so that you can use your existing methods for domain authentication, name resolution, or other domain-wide maintenance actions. For more details refer to an overview of Windows Azure connect. A very useful video explaining everything you wanted to know about Windows Azure connect.  Azure Compute Windows Azure compute provides developers a platform to host and manage applications in Microsoft’s data centres across the globe. A Windows Azure application is built from one or more components called ‘roles.’ Roles come in three different types: Web role, Worker role, and Virtual Machine (VM) role, we’ll be using the Worker role to set up the Test Agents. A very nice blog post discussing the difference between the 3 role types. Developers are free to use the .NET framework or other software that runs on Windows with the Worker role or Web role. Developers can also create applications using languages such as PHP and Java. More on Windows Azure Compute. Each Windows Azure compute instance represents a virtual server... Virtual Machine Size CPU Cores Memory Cost Per Hour Extra Small Shared 768 MB $0.04 Small 1 1.75 GB $0.12 Medium 2 3.50 GB $0.24 Large 4 7.00 GB $0.48 Extra Large 8 14.00 GB $0.96   You might want to review the Windows Azure Pricing FAQ. Let’s Get Started building the Test Rig… Configuration Machine Role Comments VM – 1 Domain Controller for Playpit.com On Premise VM – 2 TFS, Test Controller On Premise VM – 3 Test Agent Cloud   In this blog post I would assume that you have the domain, Team Foundation Server and Test Controller Installed and set up already. If not, please refer to the TFS 2010 Installation Guide and this walkthrough on MSDN to set up your Test Controller. You can also download a preconfigured TFS 2010 VM from Brian Keller's blog, Brian also has some great hands on Labs on TFS 2010 that you may want to explore. I. Lets start building VM – 3: The Test Agent Download the Windows Azure SDK and Tools Open Visual Studio and create a new Windows Azure Project using the Cloud Template                   Choose the Worker Role for reasons explained in the earlier post         The WorkerRole.cs implements the Run() and OnStart() methods, no code changes required. You should be able to compile the project and run it in the compute emulator (The compute emulator should have been installed as part of the Windows Azure Toolkit) on your local machine.                   We will only be making changes to WindowsAzureProject, open ServiceDefinition.csdef. Ensure that the vmsize is small (remember the cost chart above). Import the “Connect” module. I am importing the Connect module because I need to join the Worker role VM to the Playpit domain. <?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition"> <WorkerRole name="WorkerRole1" vmsize="Small"> <Imports> <Import moduleName="Diagnostics" /> <Import moduleName="Connect"/> </Imports> </WorkerRole> </ServiceDefinition> Go to the ServiceConfiguration.Cloud.cscfg and note that settings with key ‘Microsoft.WindowsAzure.Plugins.Connect.%%%%’ have been added to the configuration file. This is because you decided to import the connect module. See the config below. <?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration" osFamily="1" osVersion="*"> <Role name="WorkerRole1"> <Instances count="1" /> <ConfigurationSettings> <Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.ActivationToken" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Refresh" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.WaitForConnectivity" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Upgrade" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.EnableDomainJoin" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainFQDN" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainControllerFQDN" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainAccountName" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainPassword" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainOU" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Administrators" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainSiteName" value="" /> </ConfigurationSettings> </Role> </ServiceConfiguration>             Let’s go step by step and understand all the highlighted parameters and where you can find the values for them.       osFamily – By default this is set to 1 (Windows Server 2008 SP2). Change this to 2 if you want the Windows Server 2008 R2 operating system. The Advantage of using osFamily = “2” is that you get Powershell 2.0 rather than Powershell 1.0. In Powershell 2.0 you could simply use “powershell -ExecutionPolicy Unrestricted ./myscript.ps1” and it will work while in Powershell 1.0 you will have to change the registry key by including the following in your command file “reg add HKLM\Software\Microsoft\PowerShell\1\ShellIds\Microsoft.PowerShell /v ExecutionPolicy /d Unrestricted /f” before you can execute any power shell. The other reason you might want to move to os2 is if you wanted IIS 7.5.       Activation Token – To enable communication between the on premise machine and the Windows Azure Worker role VM both need to have the same token. Log on to Windows Azure Management Portal, click on Connect, click on Get Activation Token, this should give you the activation token, copy the activation token to the clipboard and paste it in the configuration file. Note – Later in the blog I’ll be showing you how to install connect on the on premise machine.                       EnableDomainJoin – Set the value to true, ofcourse we want to join the on windows azure worker role VM to the domain.       DomainFQDN, DomainControllerFQDN, DomainAccountName, DomainPassword, DomainOU, Administrators – This information is specific to your domain. I have extracted this information from the ‘service manager’ and ‘Active Directory Users and Computers’. Also, i created a new Domain-OU namely ‘CloudInstances’ so all my cloud instances joined to my domain show up here, this is optional. You can encrypt the DomainPassword – refer to the instructions here. Or hold fire, I’ll be covering that when i come to certificates and encryption in the coming section.       Now once you have filled all this information up, the configuration file should look something like below, <?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration" osFamily="2" osVersion="*"> <Role name="WorkerRole1"> <Instances count="1" /> <ConfigurationSettings> <Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.ActivationToken" value="45f55fea-f194-4fbc-b36e-25604faac784" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Refresh" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.WaitForConnectivity" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Upgrade" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.EnableDomainJoin" value="true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainFQDN" value="play.pit.com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainControllerFQDN" value="WIN-KUDQMQFGQOL.play.pit.com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainAccountName" value="playpit\Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainPassword" value="************************" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainOU" value="OU=CloudInstances, DC=Play, DC=Pit, DC=com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Administrators" value="Playpit\Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainSiteName" value="" /> </ConfigurationSettings> </Role> </ServiceConfiguration> Next we will be enabling the Remote Desktop module in to the ServiceDefinition.csdef, we could make changes manually or allow a beautiful wizard to help us make changes. I prefer the second option. So right click on the Windows Azure project and choose Publish       Now once you get the publish wizard, if you haven’t already you would be asked to import your Windows Azure subscription, this is simply the Msdn subscription activation key xml. Once you have done click Next to go to the Settings page and check ‘Enable Remote Desktop for all roles’.       As soon as you do that you get another pop up asking you the details for the user that you would be logging in with (make sure you enter a reasonable expiry date, you do not want the user account to expire today). Notice the more information tag at the bottom, click that to get access to the certificate section. See screen shot below.       From the drop down select the option to create a new certificate        In the pop up window enter the friendly name for your certificate. In my case I entered ‘WAC – Test Rig’ and click ok. This will create a new certificate for you. Click on the view button to see the certificate details. Do you see the Thumbprint, this is the value that will go in the config file (very important). Now click on the Copy to File button to copy the certificate, we will need to import the certificate to the windows Azure Management portal later. So, make sure you save it a safe location.                                Click Finish and enter details of the user you would like to create with permissions for remote desktop access, once you have entered the details on the ‘Remote desktop configuration’ screen click on Ok. From the Publish Windows Azure Wizard screen press Cancel. Cancel because we don’t want to publish the role just yet and Yes because we want to save all the changes in the config file.       Now if you go to the ServiceDefinition.csdef file you will see that the RemoteAccess and RemoteForwarder roles have been imported for you. <?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition"> <WorkerRole name="WorkerRole1" vmsize="Small"> <Imports> <Import moduleName="Diagnostics" /> <Import moduleName="Connect" /> <Import moduleName="RemoteAccess" /> <Import moduleName="RemoteForwarder" /> </Imports> </WorkerRole> </ServiceDefinition> Now go to the ServiceConfiguration.Cloud.cscfg file and you see a whole bunch for setting “Microsoft.WindowsAzure.Plugins.RemoteAccess.%%%” values added for you. <?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration" osFamily="2" osVersion="*"> <Role name="WorkerRole1"> <Instances count="1" /> <ConfigurationSettings> <Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.ActivationToken" value="45f55fea-f194-4fbc-b36e-25604faac784" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Refresh" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.WaitForConnectivity" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Upgrade" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.EnableDomainJoin" value="true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainFQDN" value="play.pit.com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainControllerFQDN" value="WIN-KUDQMQFGQOL.play.pit.com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainAccountName" value="playpit\Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainPassword" value="************************" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainOU" value="OU=CloudInstances, DC=Play, DC=Pit, DC=com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Administrators" value="Playpit\Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainSiteName" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.Enabled" value="true" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountUsername" value="Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountEncryptedPassword" value="MIIBnQYJKoZIhvcNAQcDoIIBjjCCAYoCAQAxggFOMIIBSgIBADAyMB4xHDAaBgNVBAMME1dpbmRvd 3MgQXp1cmUgVG9vbHMCEGa+B46voeO5T305N7TSG9QwDQYJKoZIhvcNAQEBBQAEggEABg4ol5Xol66Ip6QKLbAPWdmD4ae ADZ7aKj6fg4D+ATr0DXBllZHG5Umwf+84Sj2nsPeCyrg3ZDQuxrfhSbdnJwuChKV6ukXdGjX0hlowJu/4dfH4jTJC7sBWS AKaEFU7CxvqYEAL1Hf9VPL5fW6HZVmq1z+qmm4ecGKSTOJ20Fptb463wcXgR8CWGa+1w9xqJ7UmmfGeGeCHQ4QGW0IDSBU6ccg vzF2ug8/FY60K1vrWaCYOhKkxD3YBs8U9X/kOB0yQm2Git0d5tFlIPCBT2AC57bgsAYncXfHvPesI0qs7VZyghk8LVa9g5IqaM Cp6cQ7rmY/dLsKBMkDcdBHuCTAzBgkqhkiG9w0BBwEwFAYIKoZIhvcNAwcECDRVifSXbA43gBApNrp40L1VTVZ1iGag+3O1" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountExpiration" value="2012-11-27T23:59:59.0000000+00:00" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteForwarder.Enabled" value="true" /> </ConfigurationSettings> <Certificates> <Certificate name="Microsoft.WindowsAzure.Plugins.RemoteAccess.PasswordEncryption" thumbprint="AA23016CF0BDFC344400B5B82706B608B92E4217" thumbprintAlgorithm="sha1" /> </Certificates> </Role> </ServiceConfiguration>          Okay let’s look at them one at a time,       Enabled - Yes, we would like to enable Remote Access.       AccountUserName – This is the user name you entered while you were on the publish windows azure role screen, as detailed above.       AccountEncrytedPassword – Try and decode that, the certificate is used to encrypt the password you specified for the user account. Remember earlier i said, either use the instructions or wait and i’ll be showing you encryption, now the user account i am using for rdp has the same password as my domain password, so i can simply copy the value of the AccountEncryptedPassword to the DomainPassword as well.       AccountExpiration – This is the expiration as you specified in the wizard earlier, make sure your account does not expire today.       Remote Forwarder – Check out the documentation, below is how I understand it, -- One role in an application that implements a remote desktop connection must import the RemoteForwarder module. The two modules work together to enable the remote desktop connections to role instances. -- If you have multiple roles defined in the service model, it does not matter which role you add the RemoteForwarder module to, but you must add it to only one of the role definitions.       Certificate – Remember the certificate thumbprint from the wizard, the on premise machine and windows azure role machine that need to speak to each other must have the same thumbprint. More on that when we install Windows Azure connect Endpoints on the on premise machine. As i said earlier, in this blog post, I’ll be showing you the manual process so i won’t be scripting any star up tasks to install the test agent or register the test agent with the TFS Server. I’ll be showing you all this cool stuff in the next blog post, that’s because it’s important to understand the manual side of it, it becomes easier for you to troubleshoot in case something fails. Having said that, the changes we have made are sufficient to spin up the Windows Azure Worker Role aka Test Agent VM, have it connected with the play.pit.com domain and have remote access enabled on it. Before we deploy the Test Agent VM we need to set up Windows Azure Connect on the TFS Server. II. Windows Azure Connect: Setting up Connect on VM – 2 i.e. TFS & Test Controller Glad you made it so far, now to enable communication between the on premise TFS/Test Controller and Azure-ed Test Agent we need to enable communication. We have set up the Azure connect module in the Test Agent configuration, now the connect end points need to be enabled on the on premise machines, let’s have a look at how we can do this. Log on to VM – 2 running the TFS Server and Test Controller Log on to the Windows Azure Management Portal and click on Virtual Network Click on Virtual Network, if you already have a subscription you should see the below screen shot, if not, you would be asked to complete the subscription first        Click on Install Local Endpoints from the top left on the panel and you get a url appended with a token id in it, remember the token i showed you earlier, in theory the token you get here should match the token you added to the Test Agent config file.        Copy the url to the clip board and paste it in IE explorer (important, the installation at present only works out of IE and you need to have cookies enabled in order to complete the installation). As stated in the pop up, you can NOT download and run the software later, you need to run it as is, since it contains a token. Once the installation completes you should see the Windows Azure connect icon in the system tray.                         Right click the Azure Connect icon, choose Diagnostics and refer to this link for diagnostic detail terminology. NOTE – Unfortunately I could not see the Windows Azure connect icon in the system tray, a bit of binging with Google revealed that the azure connect icon is only shown when the ‘Windows Azure Connect Endpoint’ Service is started. So go to services.msc and make sure that the service is started, if not start it, unfortunately again, the service did not start for me on a manual start and i realised that one of the dependant services was disabled, you can look at the service dependencies and start them and then start windows azure connect. Bottom line, you need to start Windows Azure connect service before you can proceed. Please refer here on MSDN for more on Troubleshooting Windows Azure connect. (Follow the next step as well)   Now go back to the Windows Azure Management Portal and from Groups and Roles create a new group, lets call it ‘Test Rig’. Make sure you add the VM – 2 (the TFS Server VM where you just installed the endpoint).       Now if you go back to the Azure Connect icon in the system tray and click ‘Refresh Policy’ you will notice that the disconnected status of the icon should change to ready for connection. III. Importing Certificate in to Windows Azure Management Portal But before that you need to import the certificate you created in Step I in to the Windows Azure Management Portal. Log on to the Windows Azure Management Portal and click on ‘Hosted Services, Storage Accounts & CDN’ and then ‘Management Certificates’ followed by Add Certificates as shown in the screen shot below        Browse to the location where you saved the certificate earlier, remember… Refer to Step I in case you forgot.        Now you should be able to see the imported certificate here, make sure the thumbprint of the certificate matches the one you inserted in the config files        IV. Publish Windows Azure Worker Role aka Test Agent Having completed I, II and III, you are ready to publish the Test Agent VM – 3 to the cloud. Go to Visual Studio and right click the Windows Azure project and select Publish. Verify the infomration in the wizard, from the advanced settings tab, you can also enabled capture of intellitrace or profiling information.         Click Next and Click Publish! From the view menu bar select the Windows Azure Activity Log window.       Now you should be able to see the deployment progress in real time.             In the Windows Azure Management Portal, you should also be able to see the progress of creation of a new Worker Role.       Once the deployment is complete you should be able to RDP (go to run prompt type mstsc and in the pop up the machine name) in to the Test Agent Worker Role VM from the Playpit network using the domain admin user account. In case you are unable to log in to the Test Agent using the domain admin user account it means the process of joining the Test Agent to the domain has failed! But the good news is, because you imported the connect module, you can connect to the Test Agent machine using Windows Azure Management Portal and troubleshoot the reason for failure, you will be able to log in with the user name and password you specified in the config file for the keys ‘RemoteAccess.AccountUsername, RemoteAccess.EncryptedPassword (just that enter the password unencrypted)’, fix it or manually join the machine to the domain. Once you have managed to Join the Test Agent VM to the Domain move to the next step.      So, log in to the Test Agent Worker Role VM with the Playpit Domain Administrator and verify that you can log in, the machine is connected to the domain and the connect service is successfully running. If yes, give your self a pat on the back, you are 80% mission accomplished!         Go to the Windows Azure Management Portal and click on Virtual Network, click on Groups and Roles and click on Test Rig, click Edit Group, the edit the Test Rig group you created earlier. In the Connect to section, click on Add to select the worker role you have just deployed. Also, check the ‘Allow connections between endpoints in the group’ with this you will enable to communication between test controller and test agents and test agents/test agents. Click Save.      Now, you are ready to deploy the Test Agent software on the Worker Role Test Agent VM and configure it to work with the Test Controller. V. Configuring VM – 3: Installing Test Agent and Associating Test Agent to Controller Log in to the Worker Role Test Agent VM that you have just successfully deployed, make sure you log in with the domain administrator account. Download the All Agents software from MSDN, ‘en_visual_studio_agents_2010_x86_x64_dvd_509679.iso’, extract the iso and navigate to where you have extracted the iso. In my case, i have extracted the iso to “C:\Resources\Temp\VsAgentSetup”. Open the Test Agent folder and double click on setup.exe. Once you have installed the Test Agent you should reach the configuration window. If you face any issues installing TFS Test Agent on the VM, refer to the walkthrough on MSDN.       Once you have successfully installed the Test Agent software you will need to configure the test agent. Right click the test agent configuration tool and run as a different user. i.e. an Administrator. This is really to run the configuration wizard with elevated privileges (you might have UAC block something's otherwise).        In the run options, you can select ‘service’ you do not need to run the agent as interactive un less you are running coded UI tests. I have specified the domain administrator to connect to the TFS Test Controller. In real life, i would never do that, i would create a separate test user service account for this purpose. But for the blog post, we are using the most powerful user so that any policies or restrictions don’t block you.        Click the Apply Settings button and you should be all green! If not, the summary usually gives helpful error messages that you can resolve and proceed. As per my experience, you may run in to either a permission or a firewall blocking communication issue.        And now the moment of truth! Go to VM –2 open up Visual Studio and from the Test Menu select Manage Test Controller       Mission Accomplished! You should be able to see the Test Agent that you have just configured here,         VI. Creating and Running Load Tests on your brand new Azure-ed Test Rig I have various blog posts on Performance Testing with Visual Studio Ultimate, you can follow the links and videos below, Blog Posts: - Part 1 – Performance Testing using Visual Studio 2010 Ultimate - Part 2 – Performance Testing using Visual Studio 2010 Ultimate - Part 3 – Performance Testing using Visual Studio 2010 Ultimate Videos: - Test Tools Configuration & Settings in Visual Studio - Why & How to Record Web Performance Tests in Visual Studio Ultimate - Goal Driven Load Testing using Visual Studio Ultimate Now that you have created your load tests, there is one last change you need to make before you can run the tests on your Azure Test Rig, create a new Test settings file, and change the Test Execution method to ‘Remote Execution’ and select the test controller you have configured the Worker Role Test Agent against in our case VM – 2 So, go on, fire off a test run and see the results of the test being executed on the Azur-ed Test Rig. Review and What’s next? A quick recap of the benefits of running the Test Rig in the cloud and what i will be covering in the next blog post AND I would love to hear your feedback! Advantages Utilizing the power of Azure compute to run a heavy virtual user load. Benefiting from the Azure flexibility, destroy Test Agents when not in use, takes < 25 minutes to spin up a new Test Agent. Most important test Network Latency, (network latency and speed of connection are two different things – usually network latency is very hard to test), by placing the Test Agents in Microsoft Data centres around the globe, one can actually test the lag in transferring the bytes not because of a slow connection but because the page has been requested from the other side of the globe. Next Steps The process of spinning up the Test Agents in windows Azure is not 100% automated. I am working on the Worker process and power shell scripts to make the role deployment, unattended install of test agent software and registration of the test agent to the test controller automated. In the next blog post I will show you how to make the complete process unattended and automated. Remember to subscribe to http://feeds.feedburner.com/TarunArora. Hope you enjoyed this post, I would love to hear your feedback! If you have any recommendations on things that I should consider or any questions or feedback, feel free to leave a comment. See you in Part III.   Share this post : CodeProject

  Read the article

• Center Pictures and Other Objects in Office 2007 & 2010

  - by Matthew Guay

  Sometimes it can be difficult to center a picture in a document just by dragging it dragging it around. Today we show you how to center pictures, images, and other objects perfectly in Word and PowerPoint. Note: For this tutorial we’re using Office 2010, but the steps are nearly identical in 2007. Centering a Picture in Word First let’s insert a picture into our document.  Click the Insert tab, and then click Picture. Once you select the picture you want, it will be added to your document.  Usually, pictures are added wherever your curser was in the document, so in a blank document it will be added at the top left. Also notice Picture Tools show up in the Ribbon after inserting an image. Note: The following menu items are available in Picture Tools Format tab which is displayed when you select the object or image you’re working with. How do we align the picture just like we want?  Click Position to get some quick placement options, including centered in the middle of the document or on the top.    However, for more advanced placement, we can use the Align tool.  If Word isn’t maximized, you may only see the icon without the “Align” label. Notice the tools were grayed out in the menu by default.  To be able to change the Alignment, we need to first change the text wrap settings. Click the Wrap Text button, and any option other than “In Line with Text”.  Your choice will depend on the document you’re writing, just choose the option that works best in the document.   Now, select the Align tools again.  You can now position your image precisely with these options. Align Center will position your picture in the center of the page widthwise. Align Middle will put the picture in the middle of the page height-wise. This works the same with textboxes.  Simply click the Align button in the Format tab, and you can center it in the page. And if you’d like to align several objects together, simply select them all, click Group, and then select Group from the menu.   Now, in the align tools, you can center the whole group on your page for a heading, or whatever you want to use the pictures for. These steps also work the same with Office 2007. Center objects in PowerPoint This works similar in PowerPoint, except that pictures are automatically set for square wrapping automatically, so you don’t have to change anything.  Simply insert the picture or other object of your choice, click Align, and choose the option you want. Additionally, if one object is already aligned like you want, drag another object near it and you will see a Smart Guide to help you align or center the second object with the first.  This only works with shapes in PowerPoint 2010 beta, but will work with pictures, textboxes, and media in the final release this summer. Conclusion These are good methods for centering images and objects in Word and PowerPoint.  From designing perfect headers to emphasizing your message in a PowerPoint presentation, this is something we’ve found useful and hope you will too. Since we’re talking about Office here, it’s worth mentioning that Microsoft has announced the Technology Guarantee Program for Office 2010. Essentially what this means is, if you purchase a version of Office 2007 between March 5th and September 30th of this year, when Office 2010 is released you’ll be able to upgrade to it for free! Similar Articles Productive Geek Tips Add or Remove Apps from the Microsoft Office 2007 or 2010 SuiteAdd More Functions To Office 2007 By Installing Add-InsCustomize Your Welcome Picture Choices in Windows VistaEasily Rotate Pictures In Word 2007Add Effects To Your Pictures in Word 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox)

  Read the article

• Simple Preferred time control using silverlight 3.

  - by mohanbrij

  Here I am going to show you a simple preferred time control, where you can select the day of the week and the time of the day. This can be used in lots of place where you may need to display the users preferred times. Sample screenshot is attached below. This control is developed using Silverlight 3 and VS2008, I am also attaching the source code with this post. This is a very basic example. You can download and customize if further for your requirement if you want. I am trying to explain in few words how this control works and what are the different ways in which you can customize it further. File: PreferredTimeControl.xaml, in this file I have just hardcoded the controls and their positions which you can see in the screenshot above. In this example, to change the start day of the week and time, you will have to go and change the design in XAML file, its not controlled by your properties or implementation classes. You can also customize it to change the start day of the week, Language, Display format, styles, etc, etc. File: PreferredTimeControl.xaml.cs, In this control using the code below, first I am taking all the checkbox from my form and store it in the Global Variable, which I can use across my page. List<CheckBox> checkBoxList; #region Constructor public PreferredTimeControl() { InitializeComponent(); GetCheckboxes();//Keep all the checkbox in List in the Load itself } #endregion #region Helper Methods private List<CheckBox> GetCheckboxes() { //Get all the CheckBoxes in the Form checkBoxList = new List<CheckBox>(); foreach (UIElement element in LayoutRoot.Children) { if (element.GetType().ToString() == "System.Windows.Controls.CheckBox") { checkBoxList.Add(element as CheckBox); } } return checkBoxList; } Then I am exposing the two methods which you can use in the container form to get and set the values in this controls. /// <summary> /// Set the Availability on the Form, with the Provided Timings /// </summary> /// <param name="selectedTimings">Provided timings comes from the DB in the form 11,12,13....37 /// Where 11 refers to Monday Morning, 12 Tuesday Morning, etc /// Here 1, 2, 3 is for Morning, Afternoon and Evening respectively, and for weekdays /// 1,2,3,4,5,6,7 where 1 is for Monday, Tuesday, Wednesday, Thrusday, Friday, Saturday and Sunday respectively /// So if we want Monday Morning, we can can denote it as 11, similarly for Saturday Evening we can write 36, etc /// </param> public void SetAvailibility(string selectedTimings) { foreach (CheckBox chk in checkBoxList) { chk.IsChecked = false; } if (!String.IsNullOrEmpty(selectedTimings)) { string[] selectedString = selectedTimings.Split(','); foreach (string selected in selectedString) { foreach (CheckBox chk in checkBoxList) { if (chk.Tag.ToString() == selected) { chk.IsChecked = true; } } } } } /// <summary> /// Gets the Availibility from the selected checkboxes /// </summary> /// <returns>String in the format of 11,12,13...41,42...31,32...37</returns> public string GetAvailibility() { string selectedText = string.Empty; foreach (CheckBox chk in GetCheckboxes()) { if (chk.IsChecked == true) { selectedText = chk.Tag.ToString() + "," + selectedText; } } return selectedText; }   In my example I am using the matrix format for Day and Time, for example Monday=1, Tuesday=2, Wednesday=3, Thursday = 4, Friday = 5, Saturday = 6, Sunday=7. And Morning = 1, Afternoon =2, Evening = 3. So if I want to represent Morning-Monday I will have to represent it as 11, Afternoon-Tuesday as 22, Morning-Wednesday as 13, etc. And in the other way to set the values in the control I am passing the values in the control in the same format as preferredTimeControl.SetAvailibility("11,12,13,16,23,22"); So this will set the checkbox value for Morning-Monday, Morning-Tuesday, Morning-Wednesday, Morning-Saturday, Afternoon of Tuesday and Afternoon of Wednesday. To implement this control, first I have to import this control in xmlns namespace as xmlns:controls="clr-namespace:PreferredTimeControlApp" and finally put in your page wherever you want, <Grid x:Name="LayoutRoot" Style="{StaticResource LayoutRootGridStyle}"> <Border x:Name="ContentBorder" Style="{StaticResource ContentBorderStyle}"> <controls:PreferredTimeControl x:Name="preferredTimeControl"></controls:PreferredTimeControl> </Border> </Grid> And in the code behind you can just include this code: private void InitializeControl() { preferredTimeControl.SetAvailibility("11,12,13,16,23,22"); } And you are ready to go. For more details you can refer to my code attached. I know there can be even simpler and better way to do this. Let me know if any other ideas. Sorry, Guys Still I have used Silverlight 3 and VS2008, as from the system I am uploading this is still not upgraded, but still you can use the same code with Silverlight 4 and VS2010 without any changes. May be just it will ask you to upgrade your project which will take care of rest. Download Source Code.   Thanks ~Brij

  Read the article

• Bring Office 2003 Menus Back to 2010 with UBitMenu

  - by Matthew Guay

  Are you having trouble getting used to the Ribbon interface in Office 2010?  Here’s how you can roll back the clock a bit and bring back the familiar menus and toolbars from 2003. The Office 2007 Ribbon was both praised and criticized.  While many users felt they were more productive with the new interface, others felt frustrated searching for commands they had memorized in older versions of Office.  Now, with Office 2010, the ribbon interface has been brought to every app in the Office suite, and is integrated into many newer programs from Microsoft. If you’re moving from Office 2003, using UBitMenu allows you to add the old familiar menus back along with the new Ribbon interface for an easier learning curve. Also, with the customizability of Office 2010, we can strip away the extra Ribbon tabs to make it more like 2003. Get the 2003 Menus and Toolbars Back in Office 2010 Download UBitMenu (link below), and install as normal.  Make sure all of your Office programs are closed during the installation.  This handy utility is very small, and installed amazingly quick. Open Word, Excel, or PowerPoint and there’s now a new Menu tab beside Home in the Ribbon.  Now you can access all of your favorite old Office commands in the familiar menus, and access many of the newer Office features such as SmartArt.   Here’s a close-up of the toolbar.  Notice that the layout is very similar to that of Word 2003. You can access all of the new Transitions in PowerPoint 2010 from the menu bar.   The menu in Excel even included support for the new PivotTable and PivotCharts Wizard. One problem we noticed was that the toolbars were condensed to a drop-down menu if the Office window was less than 870px wide.  This may be a frustration to users with low-resolution displays, and you might want to use the Office Apps maximized. Get Rid of the Ribbon Now that you’ve got the old menus back, you can get rid of the extra ribbon tabs if you’d like.  Office 2010 lets you customize your ribbon and remove tabs, so let’s get rid of all the other tabs except for our new Menu tab.  In our example we’re using Word, but you can do it in Excel or PowerPoint the same way. Click the File tab and select Options. Alternately, in the Menu tab, select Tools and then Word Options. Select Customize Ribbon on the left sidebar, then uncheck the boxes beside all the ribbon tabs you want to hide on the right.  Click Ok when you’re finished. While you’re at it, you can change the default color scheme as well. Note: The color change will automatically change the color scheme in all of the Office apps, so you’ll only need to do that once. Now the ribbon only has 2 tabs…the File tab for the new Backstage View, and the UBitMenu tab we just installed.  It almost has the appearance Word 2003, but with the new features of Word 2010!  You’ll need to repeat these steps in Excel and PowerPoint if you want to customize their ribbon the same.   Conclusion If you’ve been having a hard time getting used to Office 2010, UBitMenu is a great way to get familiar with the new interface, or simply stay productive with your old tricks.  We do wish it supported the other Office applications like OneNote and Outlook. That doesn’t make it a deal breaker though, it can make the learning curve easier in Word, PowerPoint, and Excel. UBitMenu is free for personal use, and available at a very reasonable price for businesses. If you’re using Office 2007 and not a fan of the Ribbon, UBitMenu works for it as well. Download UBitMenu Similar Articles Productive Geek Tips How To Bring Back the Old Menus in Office 2007Upgrade Office 2003 to 2010 on XP or Run them Side by SideHow to Find Office 2003 Commands in Office 2010Make Word 2007 Always Save in Word 2003 FormatMake Excel 2007 Always Save in Excel 2003 Format TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Speed Up Windows With ReadyBoost Awesome World Cup Soccer Calendar Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets

  Read the article

• T-SQL Tuesday #21 - Crap!

  - by Most Valuable Yak (Rob Volk)

  Adam Machanic's (blog | twitter) ever popular T-SQL Tuesday series is being held on Wednesday this time, and the topic is… SHIT CRAP. No, not fecal material.  But crap code.  Crap SQL.  Crap ideas that you thought were good at the time, or were forced to do due (doo-doo?) to lack of time. The challenge for me is to look back on my SQL Server career and find something that WASN'T crap.  Well, there's a lot that wasn't, but for some reason I don't remember those that well.  So the additional challenge is to pick one particular turd that I really wish I hadn't squeezed out.  Let's see if this outline fits the bill: An ETL process on text files; That had to interface between SQL Server and an AS/400 system; That didn't use SSIS (should have) or BizTalk (ummm, no) but command-line scripting, using Unix utilities(!) via: xp_cmdshell; That had to email reports and financial data, some of it sensitive Yep, the stench smell is coming back to me now, as if it was yesterday… As to why SSIS and BizTalk were not options, basically I didn't know either of them well enough to get the job done (and I still don't).  I also had a strict deadline of 3 days, in addition to all the other responsibilities I had, so no time to learn them.  And seeing how screwed up the rest of the process was: Payment files from multiple vendors in multiple formats; Sent via FTP, PGP encrypted email, or some other wizardry; Manually opened/downloaded and saved to a particular set of folders (couldn't change this); Once processed, had to be placed BACK in the same folders with the original archived; x2 divisions that had to run separately; Plus an additional vendor file in another format on a completely different schedule; So that they could be MANUALLY uploaded into the AS/400 system (couldn't change this either, even if it was technically possible) I didn't feel so bad about the solution I came up with, which was naturally: Copy the payment files to the local SQL Server drives, using xp_cmdshell Run batch files (via xp_cmdshell) to parse the different formats using sed, a Unix utility (this was before Powershell) Use other Unix utilities (join, split, grep, wc) to process parsed files and generate metadata (size, date, checksum, line count) Run sqlcmd to execute a stored procedure that passed the parsed file names so it would bulk load the data to do a comparison bcp the compared data out to ANOTHER text file so that I could grep that data out of the original file Run another stored procedure to import the matched data into SQL Server so it could process the payments, including file metadata Process payment batches and log which division and vendor they belong to Email the payment details to the finance group (since it was too hard for them to run a web report with the same data…which they ran anyway to compare the emailed file against…which always matched, surprisingly) Email another report showing unmatched payments so they could manually void them…about 3 months afterward All in "Excel" format, using xp_sendmail (SQL 2000 system) Copy the unmatched data back to the original folder locations, making sure to match the file format exactly (if you've ever worked with ACH files, you'll understand why this sucked) If you're one of the 10 people who have read my blog before, you know that I love the DOS "for" command.  Like passionately.  Like fairy-tale love.  So my batch files were riddled with for loops, nested within other for loops, that called other batch files containing for loops.  I think there was one section that had 4 or 5 nested for commands.  It was wrong, disturbed, and completely un-maintainable by anyone, even myself.  Months, even a year, after I left the company I got calls from someone who had to make a minor change to it, and they called me to talk them out of spraying the office with an AK-47 after looking at this code.  (for you Star Trek TOS fans) The funniest part of this, well, one of the funniest, is that I made the deadline…sort of, I was only a day late…and the DAMN THING WORKED practically unchanged for 3 years.  Most of the problems came from the manual parts of the overall process, like forgetting to decrypt the files, or missing/late files, or saved to the wrong folders.  I'm definitely not trying to toot my own horn here, because this was truly one of the dumbest, crappiest solutions I ever came up with.  Fortunately as far as I know it's no longer in use and someone has written a proper replacement.  Today I would knuckle down and do it in SSIS or Powershell, even if it took me weeks to get it right. The real lesson from this crap code is to make things MAINTAINABLE and UNDERSTANDABLE.  sed scripting regular expressions doesn't fit that criteria in any way.  If you ever find yourself under pressure to do something fast at all costs, DON'T DO IT.  Stop and consider long-term maintainability, not just for yourself but for others on your team.  If you can't explain the basic approach in under 5 minutes, it ultimately won't succeed.  And while you may love to leave all that crap behind, it may follow you anyway, and you'll step in it again.   P.S. - if you're wondering about all the manual stuff that couldn't be changed, it was because the entire process had gone through Six Sigma, and was deemed the best possible way.  Phew!  Talk about stink!

  Read the article

• First time shadow mapping problems

  - by user1294203

  I have implemented basic shadow mapping for the first time in OpenGL using shaders and I'm facing some problems. Below you can see an example of my rendered scene: The process of the shadow mapping I'm following is that I render the scene to the framebuffer using a View Matrix from the light point of view and the projection and model matrices used for normal rendering. In the second pass, I send the above MVP matrix from the light point of view to the vertex shader which transforms the position to light space. The fragment shader does the perspective divide and changes the position to texture coordinates. Here is my vertex shader, #version 150 core uniform mat4 ModelViewMatrix; uniform mat3 NormalMatrix; uniform mat4 MVPMatrix; uniform mat4 lightMVP; uniform float scale; in vec3 in_Position; in vec3 in_Normal; in vec2 in_TexCoord; smooth out vec3 pass_Normal; smooth out vec3 pass_Position; smooth out vec2 TexCoord; smooth out vec4 lightspace_Position; void main(void){ pass_Normal = NormalMatrix * in_Normal; pass_Position = (ModelViewMatrix * vec4(scale * in_Position, 1.0)).xyz; lightspace_Position = lightMVP * vec4(scale * in_Position, 1.0); TexCoord = in_TexCoord; gl_Position = MVPMatrix * vec4(scale * in_Position, 1.0); } And my fragment shader, #version 150 core struct Light{ vec3 direction; }; uniform Light light; uniform sampler2D inSampler; uniform sampler2D inShadowMap; smooth in vec3 pass_Normal; smooth in vec3 pass_Position; smooth in vec2 TexCoord; smooth in vec4 lightspace_Position; out vec4 out_Color; float CalcShadowFactor(vec4 lightspace_Position){ vec3 ProjectionCoords = lightspace_Position.xyz / lightspace_Position.w; vec2 UVCoords; UVCoords.x = 0.5 * ProjectionCoords.x + 0.5; UVCoords.y = 0.5 * ProjectionCoords.y + 0.5; float Depth = texture(inShadowMap, UVCoords).x; if(Depth < (ProjectionCoords.z + 0.001)) return 0.5; else return 1.0; } void main(void){ vec3 Normal = normalize(pass_Normal); vec3 light_Direction = -normalize(light.direction); vec3 camera_Direction = normalize(-pass_Position); vec3 half_vector = normalize(camera_Direction + light_Direction); float diffuse = max(0.2, dot(Normal, light_Direction)); vec3 temp_Color = diffuse * vec3(1.0); float specular = max( 0.0, dot( Normal, half_vector) ); float shadowFactor = CalcShadowFactor(lightspace_Position); if(diffuse != 0 && shadowFactor > 0.5){ float fspecular = pow(specular, 128.0); temp_Color += fspecular; } out_Color = vec4(shadowFactor * texture(inSampler, TexCoord).xyz * temp_Color, 1.0); } One of the problems is self shadowing as you can see in the picture, the crate has its own shadow cast on itself. What I have tried is enabling polygon offset (i.e. glEnable(POLYGON_OFFSET_FILL), glPolygonOffset(GLfloat, GLfloat) ) but it didn't change much. As you see in the fragment shader, I have put a static offset value of 0.001 but I have to change the value depending on the distance of the light to get more desirable effects , which not very handy. I also tried using front face culling when I render to the framebuffer, that didn't change much too. The other problem is that pixels outside the Light's view frustum get shaded. The only object that is supposed to be able to cast shadows is the crate. I guess I should pick more appropriate projection and view matrices, but I'm not sure how to do that. What are some common practices, should I pick an orthographic projection? From googling around a bit, I understand that these issues are not that trivial. Does anyone have any easy to implement solutions to these problems. Could you give me some additional tips? Please ask me if you need more information on my code. Here is a comparison with and without shadow mapping of a close-up of the crate. The self-shadowing is more visible.

  Read the article

• Branching and Merging Improvements in TFS2010

  - by jehan

  Introducing the concept of “first class branches” is a significant improvement as part of the 2010 release with respect to version control.  Not only does it help to distinguish between folders and branches, but it enables branch visualizations. Let us see improvements in detail. ·         In TFS2008, you don’t know which of the folders are Branches: All folders looks the same, all have the folder icon. Now, In TFS 2010 there is a new icon that shows which of the folder is a Branch.       ·      There is no visual means to manage branches in TFS2008:   You dont have any means to identify which branches are related and the relation type. Now, In TFS 2010 you have visual tools to see the Branches Hierarchy. In order to see a Branch Hierarchy just Right Click the Branch and choose: Branching and Merging –> View Hierarchy     ·         In TFS2008, there is no option to track changes path between the Branches:  If you have made a merge in a Branch you can’t track from which Branch this Merge came from. Now, you have the tools that shows the path of change between the Branches, you can also see where change was added on a timeline.  In order to track a change do the following: Step1: Right click the Branch and click View History   Step 2: Choose a changeset to track and click the “Track Changeset” button.     Step 3: Choose the branches that will be in the view and click “Visualize”. In above visual, you can see that Changesets 108,109,110 and 119 where merged from Main to Release1.0 Branch and then “Release_1.0” Branched to “Dev1.0. Step4: You can also see the Merges on a Timeline by clicking on the “Timeline Tracking” button.   Creating New Branches: In TFS 2010, the creation of branches has been streamlined a bit from the process in 2008.  In 2008, creating a new branch was like every other action in the system – changes were pended on the client, and then checked in to the server. Because of this creating new branch in TFS2008 was time-consuming process.  In TFS2010, the step where changes are pended has been bypassed and now performing the branch creation is entirely on the server.  With this approach, the round trip time for downloading a copy of each file on the branch and then uploading each file again has been eliminated.  Note: In TFS2010, the new branch will be created and committed as a single operation on the server. Pending changes will not be created, it doesn’t require a check-in as it will be carried out as a single operation and it’s not possible to cancel.     Manage Branch Permissions: The properties view for branches is also different than that of ordinary folders or file, containing some metadata for the branch, relationship information, and permissions for the branch. In TFS2008, the users who have checkout and Check-in permissions can create a branch. But, In TFS2010 you can control the permissions for Branches using Manage Branch permissions.   Reparent option in TFS2010: In TFS2008, if we have two branches which don’t have parent-child relation and we want perform merge between these two branches then we have to perform baseless merge using tf.exe command line. I have two branches Release_1.0 and Dev1.0_F2 which don’t have any relation between them, that’s why when I click on merge option in Release_1.0, in Target Branch it’s not showing Dev1.0_F2 branch to perform the merges.     Let us see what can we do for this in TFS2010, first perform a TFS baseless merge to establish a relationship between the parent branch and the child branches.  It will only merge the folder, not its contents. TFS baseless merges are performed via the command line using VS2010 command prompt and do the following:   tf merge /baseless <ParentBranch> <childBranch> Check in your pending changes. It will create the link between the branches but the relationships are still not completed.  Now, select the child branch in Source Control Explorer and from the File menu choose Source Control –> Branching and Merging –> Reparent.      In the dialog box,  choose the appropriate branch as the new parent.   Click Reparent and then go to parent branch and click merge. Now, will see that in Target Branch option Dev1.0_F2 branch is added.         Converting Folders to Branches and Branches to Folders: You can convert any Folder as Branch from Context Menu by performing right click on the folderàBranching and MergingàConvert to Branch. In similar way, you can convert the Branches to Folder using Convert to Folder option available in File Menu (FileàSource ControlàBranching and MergingàConvert to Branch). This option is not available in context menu.

  Read the article

• Deep in the Heart of Texas

  - by Applications User Experience

  Author: Erika Webb, Manager, Fusion Applications UX User Assistance When I was first working in the usability field, the only way I could consider conducting a usability study was to bring a potential user to a lab environment where I could show them whatever I was interested in learning more about and ask them questions. While I hate to reveal just how long I have been working in this field, let's just say that pads of paper and a stopwatch were key tools for any test I conducted. Over the years, I have worked in simple labs with basic video taping equipment and not much else, and I have worked in corporate environments with sophisticated usability labs and state-of-the-art equipment. Years ago, we conducted all usability studies at the location of the user. If we wanted to see if there were any differences between users in New York, Chicago, and Los Angeles, we went to those places to run the test. A lab environment is very useful for many test situations. However, there has always been a debate in the usability field about whether bringing someone into a lab environment, however friendly we make it, somehow intrinsically changes the behavior of the user as compared to having them work in their own environment, at their own desk, and on their own computer. We developed systems to create a portable usability lab, so that we could go to the users that we needed to test.  Do lab environments change user behavior patterns? Then 9/11 hit. You may not remember, but no planes flew for weeks afterwards. Companies all over the world couldn't fly-in employees for meetings. Suddenly, traveling to the location of the users had an additional difficulty. The company I was working for at the time had usability specialists stuck in New York for days before they could finally rent a car and drive home to Colorado. This changed the world pretty suddenly, and technology jumped on the change. Companies offering Internet meeting tools were strugglinguntil no one could travel. The Internet boomed with collaboration tools that enabled people to work together wherever they happened to be. This change in technology has made a huge difference in my world. We use collaborative tools to bring our product concepts and ideas to the user across the Internet. As a global company, we benefit from having users from all over the world inform our designs. We now run usability studies with users all over the world in a single day, a feat we couldn't have accomplished 10 years ago by plane! Other technology companies have started to do more of this type of usability testing, since the tools have improved so dramatically. Plus, in our busy world, it's not always easy to find users who can take the time away from their jobs to come to our labs. reaching users where it is convenient for them greatly improves the odds that people do participate. I manage a team of usability specialists who live in India and California, whlie I live in Colorado. We have wonderful labs that we bring users into to show them our products. But very often, we run our studies remotely. We used to take the lab to the users now we use the labs, but we let the users stay where they are. We gain users who might not have been able to leave work to come to our labs, and they get to use the system they are familiar with. And we gain users nearly anywhere that we can set up an Internet connection, as long as the users have a phone, a broadband connection, and a compatible Web browser (with no pop-up blockers). After we recruit participants in a traditional manner, we send them an invitation to participate through the use of a telephone conference call and Web conferencing tool. At Oracle, we use Oracle Web Conference part of Oracle Collaboration Suite, which enables us to give the user control of the mouse, while we present a prototype or wireframe pictures. We can record the sessions over the Web and phone conference. We send the users instructions, plus tips to ensure that we won't have problems sharing screens. In some cases, when time is tight, we even run a five-minute "test session" with users a day in advance to be sure that we can connect. Prior to the test, we send users a participant script that contains information about the study, including any questionnaires. This is exactly the same script we give to participants who come to the labs. We ask users to print this before the beginning of the session. We generally run these studies by having a usability engineer in our usability labs, so that we can record the session as though the user were in the lab with us. Roughly 80% of our application software usability testing at Oracle is performed using remote methods. The probability of getting a   remote test participant decreases the higher up the person is in the target organization. We have a methodology checklist available to help our usability engineers work through the remote processes.

  Read the article

• OpenSSL Versions in Solaris

  - by darrenm

  Those of you have have installed Solaris 11 or have read some of the blogs by my colleagues will have noticed Solaris 11 includes OpenSSL 1.0.0, this is a different version to what we have in Solaris 10.  I hope the following explains why that is and how it fits with the expectations on binary compatibility between Solaris releases. Solaris 10 was the first release where we included OpenSSL libraries and headers (part of it was actually statically linked into the SSH client/server in Solaris 9).  At time we were building and releasing Solaris 10 the current train of OpenSSL was 0.9.7.  The OpenSSL libraries at that time were known to not always be completely API and ABI (binary) compatible between releases (some times even in the lettered patch releases) though mostly if you stuck with the documented high level APIs you would be fine.   For this reason OpenSSL was classified as a 'Volatile' interface and in Solaris 10 Volatile interfaces were not part of the default library search path which is why the OpenSSL libraries live in /usr/sfw/lib on Solaris 10.  Okay, but what does Volatile mean ? Quoting from the attributes(5) man page description of Volatile (which was called External in older taxonomy): Volatile interfaces can change at any time and for any reason. The Volatile interface stability level allows Sun pro- ducts to quickly track a fluid, rapidly evolving specif- ication. In many cases, this is preferred to providing additional stability to the interface, as it may better meet the expectations of the consumer. The most common application of this taxonomy level is to interfaces that are controlled by a body other than Sun, but unlike specifications controlled by standards bodies or Free or Open Source Software (FOSS) communities which value interface compatibility, it can not be asserted that an incompatible change to the interface specifica- tion would be exceedingly rare. It may also be applied to FOSS controlled software where it is deemed more important to track the community with minimal latency than to provide stability to our customers. It also common to apply the Volatile classification level to interfaces in the process of being defined by trusted or widely accepted organization. These are generically referred to as draft standards. An "IETF Internet draft" is a well understood example of a specification under development. Volatile can also be applied to experimental interfaces. No assertion is made regarding either source or binary compatibility of Volatile interfaces between any two releases, including patches. Applications containing these interfaces might fail to function properly in any future release. Note that last paragraph!  OpenSSL is only one example of the many interfaces in Solaris that are classified as Volatile.  At the other end of the scale we have Committed (Stable in Solaris 10 terminology) interfaces, these include things like the POSIX APIs or Solaris specific APIs that we have no intention of changing in an incompatible way.  There are also Private interfaces and things we declare as Not-an-Interface (eg command output not intended for scripting against only to be read by humans). Even if we had declared OpenSSL as a Committed/Stable interface in Solaris 10 there are allowed exceptions, again quoting from attributes(5): 4. An interface specification which isn't controlled by Sun has been changed incompatibly and the vast majority of interface consumers expect the newer interface. 5. Not making the incompatible change would be incomprehensible to our customers. In our opinion and that of our large and small customers keeping up with the OpenSSL community is important, and certainly both of the above cases apply. Our policy for dealing with OpenSSL on Solaris 10 was to stay at 0.9.7 and add fixes for security vulnerabilities (the version string includes the CVE numbers of fixed vulnerabilities relevant to that release train).  The last release of OpenSSL 0.9.7 delivered by the upstream community was more than 4 years ago in Feb 2007. Now lets roll forward to just before the release of Solaris 11 Express in 2010. By that point in time the current OpenSSL release was 0.9.8 with the 1.0.0 release known to be coming soon.  Two significant changes to OpenSSL were made between Solaris 10 and Solaris 11 Express.  First in Solaris 11 Express (and Solaris 11) we removed the requirement that Volatile libraries be placed in /usr/sfw/lib, that means OpenSSL is now in /usr/lib, secondly we upgraded it to the then current version stream of OpenSSL (0.9.8) as was expected by our customers. In between Solaris 11 Express in 2010 and the release of Solaris 11 in 2011 the OpenSSL community released version 1.0.0.  This was a huge milestone for a long standing and highly respected open source project.  It would have been highly negligent of Solaris not to include OpenSSL 1.0.0e in the Solaris 11 release. It is the latest best supported and best performing version.     In fact Solaris 11 isn't 'just' OpenSSL 1.0.0 but we have added our SPARC T4 engine and the AES-NI engine to support the on chip crypto acceleration. This gives us 4.3x better AES performance than OpenSSL 0.9.8 running on AIX on an IBM POWER7. We are now working with the OpenSSL community to determine how best to integrate the SPARC T4 changes into the mainline OpenSSL.  The OpenSSL 'pkcs11' engine we delivered in Solaris 10 to support the CA-6000 card and the SPARC T1/T2/T3 hardware is still included in Solaris 11. When OpenSSL 1.0.1 and 1.1.0 come out we will asses what is best for Solaris customers. It might be upgrade or it might be parallel delivery of more than one version stream.  At this time Solaris 11 still classifies OpenSSL as a Volatile interface, it is our hope that we will be able at some point in a future release to give it a higher interface stability level. Happy crypting! and thank-you OpenSSL community for all the work you have done that helps Solaris.

  Read the article

• Death March

  - by Nick Harrison

  It is a horrible sight to watch a project fail. There are few things as bad. Watching a project fail regardless of the reason is almost like sitting in a room with a "Dementor" from Harry Potter. It will literally suck all of the life and joy out of the room. Nearly every project that I have seen fail has failed because of political challenges or management challenges. Sometimes there are technical challenges that bring a project to its knees, but usually projects fail for less technical reasons. Here a few observations about projects failing for political reasons. Both the client and the consultants have to be committed to seeing the project succeed. Put simply, you cannot solve a problem when the primary stake holders do not truly want it solved. This could come from a consultant being more interested in extended the engagement. It could come from a client being afraid of what will happen to them once the problem is solved. It could come from disenfranchised stake holders. Sometimes a project is beset on all sides. When you find yourself working on a project that has this kind of threat, do all that you can to constrain the disruptive influences of the bad apples. If their influence cannot be constrained, you truly have no choice but to move on to a new project. Tough choices have to be made to make a project successful. These choices will affect everyone involved in the project. These choices may involve users not getting a change request through that they want. Developers may not get to use the tools that they want. Everyone may have to put in more hours that they originally planned. Steps may be skipped. Compromises will be made, but if everyone stays committed to the end goal, you can still be successful. If individuals start feeling disgruntled or resentful of the compromises reached, the project can easily be derailed. When everyone is not working towards a common goal, it is like driving with one foot on the break and one foot on the accelerator. Not only will you not get to where you are planning, you will also damage the car and possibly the passengers as well.   It is important to always keep the end result in mind. Regardless of the development methodology being followed, the end goal is not comprehensive documentation. In all cases, it is working software. Comprehensive documentation is nice but useless if the software doesn't work.   You can never get so distracted by the next goal that you fail to meet the current goal. Most projects are ultimately marathons. This means that the pace must be sustainable. Regardless of the temptations, you cannot burn the team alive. Processes will fail. Technology will get outdated. Requirements will change, but your people will adapt and learn and grow. If everyone on the team from the most senior analyst to the most junior recruit trusts and respects each other, there is no challenge that they cannot overcome. When everyone involved faces challenges with the attitude "This is my project and I will not let it fail" "You are my teammate and I will not let you fail", you will in fact not fail. When you find a team that embraces this attitude, protect it at all cost. Edward Yourdon wrote a book called Death March. In it, he included a graph for categorizing Death March project types based on the Happiness of the Team and the Chances of Success.   Chances are we have all worked on Death March projects. We will all most likely work on more Death March projects in the future. To a certain extent, they seem to be inevitable, but they should never be suicide or ugly. Ideally, they can all be "Mission Impossible" where everyone works hard, has fun, and knows that there is good chance that they will succeed. If you are ever lucky enough to work on such a project, you will know that sense of pride that comes from the eventual success. You will recognize a profound bond with the team that you worked with. Chances are it will change your life or at least your outlook on life. If you have not already read this book, get a copy and study it closely. It will help you survive and make the most out of your next Death March project.

  Read the article

• Customizing UPK outputs (Part 2 - Player)

  - by [email protected]

  There are a few things that can be done to give the Player output a personalized look to match your corporate branding. In my previous post, I talked about changing the logo. In addition to the logo, you can change the graphic in the heading, button colors, border colors and many other items. Prior to making any customizations, I strongly recommend making a copy of the existing Player style. This will give you a backup in case things go wrong. I'd also recommend that you create your own brand. This way, when you install the newest updates from us, your brand will remain intact. Creating your own brand is pretty easy. Make sure you have modify permissions on the publishing styles directory, if you are using a multi-user installation. Under the Publishing/Styles folder, create a new folder with your company name. Copy all the publishing styles from the UPK folder to your newly created folder. Now, when you go through the Publishing wizard, you will have two categories to choose from: the UPK category or your custom category. Now, for updating the Player output. First, the graphic that appears on the right hand side of the Player. If you're using a multi-user installation, check out the player style from your custom brand. Open the player style. Open the img folder. The file named "banner_image.png" represents the graphic that appears on the right hand side of the player. It is currently sized at 425 x 54. Try to keep your graphic about the same size. Rename your graphic file to be "banner_image.png", and drag it into the img folder. Save the package. Check in the package if you are in a multi-user installation. You've just updated the banner heading! Next, let's work on updating some of the other colors in the player. All the customizable areas are located in the skin.css file which is in the root of the Player style. Many of our customers update the colors to match their own theme. You don't have to be a programmer to make these changes, honest. :) To change the colors in the player: Make a copy of the original skin.css file. (This is to make sure you have a working version to revert to, in case something goes wrong.) Open the skin.css file from the Player package. You can edit it using Notepad. Make the desired changes. Save the file. Save the package. Publish to view your new changes. When you open the skin.css, you will see groupings like this: .headerDivbar { height: 21px; background-color: #CDE2FD; } Change the value of the background-color to the color of your choice. Note that you cannot use "red" as a color, but rather you should enter the hexadecimal color code. If you don't know the color code, search the web for "hexadecimal colors" and you'll find many sites to provide the information. Here are a few of the variables that you can update. Heading: .headerDivbar -this changes the color of the banner that appears under the graphic Button colors: .navCellOn - changes the color of the mode buttons when your mouse is hovering on them. .navCellOff - changes the color of the mode buttons when the mouse is not over them Lines: .thorizontal - this is the color of the horizontal lines surrounding the outline .tvertical - this is the color of the vertical lines on the left and right margin in the outline. .tsep - this is the color of the line that separates the outline from the content area Search frame: .tocSearchColor - this is the color of the search area .tocFrameText - this is the background color of the TOC tree. Hint: If you want to try out the changes prior to updating the style, you can update the skin.css in some content you've already published for the player (it's located in the css folder of the player package). This way, you can immediately see the changes without going through publishing. Once you're happy with the changes, update the skin.css in player style. Want to customize more? Refer to the "Customizing the Player" section of the Content Development manual for more details on all the options in the skin.css that can be changed, and pictures of what each variable controls. I'd love to see how you've customized the player for your corporate needs. Also, if there are other areas of the player you'd like to modify but have not been able to, let us know. Feel free to share your thoughts in the comments. --Maria Cozzolino, Manager of Requirements & UI Design for UPK

  Read the article

• Clean way to use mutable implementation of Immutable interfaces for encapsulation

  - by dsollen

  My code is working on some compost relationship which creates a tree structure, class A has many children of type B, which has many children of type C etc. The lowest level class, call it bar, also points to a connected bar class. This effectively makes nearly every object in my domain inter-connected. Immutable objects would be problematic due to the expense of rebuilding almost all of my domain to make a single change to one class. I chose to go with an interface approach. Every object has an Immutable interface which only publishes the getter methods. I have controller objects which constructs the domain objects and thus has reference to the full objects, thus capable of calling the setter methods; but only ever publishes the immutable interface. Any change requested will go through the controller. So something like this: public interface ImmutableFoo{ public Bar getBar(); public Location getLocation(); } public class Foo implements ImmutableFoo{ private Bar bar; private Location location; @Override public Bar getBar(){ return Bar; } public void setBar(Bar bar){ this.bar=bar; } @Override public Location getLocation(){ return Location; } } public class Controller{ Private Map<Location, Foo> fooMap; public ImmutableFoo addBar(Bar bar){ Foo foo=fooMap.get(bar.getLocation()); if(foo!=null) foo.addBar(bar); return foo; } } I felt the basic approach seems sensible, however, when I speak to others they always seem to have trouble envisioning what I'm describing, which leaves me concerned that I may have a larger design issue then I'm aware of. Is it problematic to have domain objects so tightly coupled, or to use the quasi-mutable approach to modifying them? Assuming that the design approach itself isn't inherently flawed the particular discussion which left me wondering about my approach had to do with the presence of business logic in the domain objects. Currently I have my setter methods in the mutable objects do error checking and all other logic required to verify and make a change to the object. It was suggested that this should be pulled out into a service class, which applies all the business logic, to simplify my domain objects. I understand the advantage in mocking/testing and general separation of logic into two classes. However, with a service method/object It seems I loose some of the advantage of polymorphism, I can't override a base class to add in new error checking or business logic. It seems, if my polymorphic classes were complicated enough, I would end up with a service method that has to check a dozen flags to decide what error checking and business logic applies. So, for example, if I wanted to have a childFoo which also had a size field which should be compared to bar before adding par my current approach would look something like this. public class Foo implements ImmutableFoo{ public void addBar(Bar bar){ if(!getLocation().equals(bar.getLocation()) throw new LocationException(); this.bar=bar; } } public interface ImmutableChildFoo extends ImmutableFoo{ public int getSize(); } public ChildFoo extends Foo implements ImmutableChildFoo{ private int size; @Override public int getSize(){ return size; } @Override public void addBar(Bar bar){ if(getSize()<bar.getSize()){ throw new LocationException(); super.addBar(bar); } My colleague was suggesting instead having a service object that looks something like this (over simplified, the 'service' object would likely be more complex). public interface ImmutableFoo{ ///original interface, presumably used in other methods public Location getLocation(); public boolean isChildFoo(); } public interface ImmutableSizedFoo implements ImmutableFoo{ public int getSize(); } public class Foo implements ImmutableSizedFoo{ public Bar bar; @Override public void addBar(Bar bar){ this.bar=bar; } @Override public int getSize(){ //default size if no size is known return 0; } @Override public boolean isChildFoo return false; } } public ChildFoo extends Foo{ private int size; @Override public int getSize(){ return size; } @Override public boolean isChildFoo(); return true; } } public class Controller{ Private Map<Location, Foo> fooMap; public ImmutableSizedFoo addBar(Bar bar){ Foo foo=fooMap.get(bar.getLocation()); service.addBarToFoo(foo, bar); returned foo; } public class Service{ public static void addBarToFoo(Foo foo, Bar bar){ if(foo==null) return; if(!foo.getLocation().equals(bar.getLocation())) throw new LocationException(); if(foo.isChildFoo() && foo.getSize()<bar.getSize()) throw new LocationException(); foo.setBar(bar); } } } Is the recommended approach of using services and inversion of control inherently superior, or superior in certain cases, to overriding methods directly? If so is there a good way to go with the service approach while not loosing the power of polymorphism to override some of the behavior?

  Read the article

• Reference Data Management and Master Data: Are Relation ?

  - by Mala Narasimharajan

  Submitted By:  Rahul Kamath  Oracle Data Relationship Management (DRM) has always been extremely powerful as an Enterprise Master Data Management (MDM) solution that can help manage changes to master data in a way that influences enterprise structure, whether it be mastering chart of accounts to enable financial transformation, or revamping organization structures to drive business transformation and operational efficiencies, or restructuring sales territories to enable equitable distribution of leads to sales teams following the acquisition of new products, or adding additional cost centers to enable fine grain control over expenses. Increasingly, DRM is also being utilized by Oracle customers for reference data management, an emerging solution space that deserves some explanation. What is reference data? How does it relate to Master Data? Reference data is a close cousin of master data. While master data is challenged with problems of unique identification, may be more rapidly changing, requires consensus building across stakeholders and lends structure to business transactions, reference data is simpler, more slowly changing, but has semantic content that is used to categorize or group other information assets – including master data – and gives them contextual value. In fact, the creation of a new master data element may require new reference data to be created. For example, when a European company acquires a US business, chances are that they will now need to adapt their product line taxonomy to include a new category to describe the newly acquired US product line. Further, the cross-border transaction will also result in a revised geo hierarchy. The addition of new products represents changes to master data while changes to product categories and geo hierarchy are examples of reference data changes.1 The following table contains an illustrative list of examples of reference data by type. Reference data types may include types and codes, business taxonomies, complex relationships & cross-domain mappings or standards. Types & Codes Taxonomies Relationships / Mappings Standards Transaction Codes Industry Classification Categories and Codes, e.g., North America Industry Classification System (NAICS) Product / Segment; Product / Geo Calendars (e.g., Gregorian, Fiscal, Manufacturing, Retail, ISO8601) Lookup Tables (e.g., Gender, Marital Status, etc.) Product Categories City à State à Postal Codes Currency Codes (e.g., ISO) Status Codes Sales Territories (e.g., Geo, Industry Verticals, Named Accounts, Federal/State/Local/Defense) Customer / Market Segment; Business Unit / Channel Country Codes (e.g., ISO 3166, UN) Role Codes Market Segments Country Codes / Currency Codes / Financial Accounts Date/Time, Time Zones (e.g., ISO 8601) Domain Values Universal Standard Products and Services Classification (UNSPSC), eCl@ss International Classification of Diseases (ICD) e.g., ICD9 à IC10 mappings Tax Rates Why manage reference data? Reference data carries contextual value and meaning and therefore its use can drive business logic that helps execute a business process, create a desired application behavior or provide meaningful segmentation to analyze transaction data. Further, mapping reference data often requires human judgment. Sample Use Cases of Reference Data Management Healthcare: Diagnostic Codes The reference data challenges in the healthcare industry offer a case in point. Part of being HIPAA compliant requires medical practitioners to transition diagnosis codes from ICD-9 to ICD-10, a medical coding scheme used to classify diseases, signs and symptoms, causes, etc. The transition to ICD-10 has a significant impact on business processes, procedures, contracts, and IT systems. Since both code sets ICD-9 and ICD-10 offer diagnosis codes of very different levels of granularity, human judgment is required to map ICD-9 codes to ICD-10. The process requires collaboration and consensus building among stakeholders much in the same way as does master data management. Moreover, to build reports to understand utilization, frequency and quality of diagnoses, medical practitioners may need to “cross-walk” mappings -- either forward to ICD-10 or backwards to ICD-9 depending upon the reporting time horizon. Spend Management: Product, Service & Supplier Codes Similarly, as an enterprise looks to rationalize suppliers and leverage their spend, conforming supplier codes, as well as product and service codes requires supporting multiple classification schemes that may include industry standards (e.g., UNSPSC, eCl@ss) or enterprise taxonomies. Aberdeen Group estimates that 90% of companies rely on spreadsheets and manual reviews to aggregate, classify and analyze spend data, and that data management activities account for 12-15% of the sourcing cycle and consume 30-50% of a commodity manager’s time. Creating a common map across the extended enterprise to rationalize codes across procurement, accounts payable, general ledger, credit card, procurement card (P-card) as well as ACH and bank systems can cut sourcing costs, improve compliance, lower inventory stock, and free up talent to focus on value added tasks. Change Management: Point of Sales Transaction Codes and Product Codes In the specialty finance industry, enterprises are confronted with usury laws – governed at the state and local level – that regulate financial product innovation as it relates to consumer loans, check cashing and pawn lending. To comply, it is important to demonstrate that transactions booked at the point of sale are posted against valid product codes that were on offer at the time of booking the sale. Since new products are being released at a steady stream, it is important to ensure timely and accurate mapping of point-of-sale transaction codes with the appropriate product and GL codes to comply with the changing regulations. Multi-National Companies: Industry Classification Schemes As companies grow and expand across geographies, a typical challenge they encounter with reference data represents reconciling various versions of industry classification schemes in use across nations. While the United States, Mexico and Canada conform to the North American Industry Classification System (NAICS) standard, European Union countries choose different variants of the NACE industry classification scheme. Multi-national companies must manage the individual national NACE schemes and reconcile the differences across countries. Enterprises must invest in a reference data change management application to address the challenge of distributing reference data changes to downstream applications and assess which applications were impacted by a given change. References 1 Master Data versus Reference Data, Malcolm Chisholm, April 1, 2006.

  Read the article

• CD/DVD drive not mounted when inserted with Disc of any kind

  - by Cisco Sán

  I just noticed that if a insert a CD or a DVD of any kind, the Drive will start spinning but it will not show the mounted disc. Before it used to ask me what to do with the media inserted. Now it doesn't even do that. I ran in the terminal this code: eject -n and it displays this: " eject: device is `/dev/sr0'" what can I do to get the functionality back on my drive. also ran this command: sudo mount -o ro,unhide,uid=1000 /dev/cdrom /mnt/cdrom but in return i get this: " mount: mount point /mnt/cdrom does not exist" Running Ubuntu 11.10 HERE IS THE HISTORY UNTIL NOW thanks Waltinator: I ran the 'dmesg' but don't know what I'm looking for. Im a newbie on this. The same thing with the 'ls -rlt /var/log' command. Should I create the directory for the mount? at this point really don't know what to do. – Cisco Sán 7 hours ago Here are 3 lines from my dmesg after I successfully inserted a CD: [ 4804.416018] wlan0: no IPv6 routers present [ 8214.125450] ISdit ISO 9660 Extensions: Microsoft Joliet Level 3 [ 8214.136556] ISO 9660 Extensions: RRIP_1991A The first line is a previous event, my wireless going online. The next 2 lines are a good result. The number in square brackets is "seconds since boot", the rest of the line is usually helpful. And no, you should NOT create the mount point. Let's try to get the automatic mounting to work. – waltinator 7 hours ago ok this are my last 3 lines on the 'dmesg' [ 18.130819] init: plymouth-stop pre-start process (1396) terminated with status 1 [ 28.780011] wlan0: no IPv6 routers present [ 505.632119] CE: hpet increased min_delta_ns to 20113 nsec – Cisco Sán 6 hours ago It looks like your CD/DVD drive is not connected to the data bus, and not causing an interrupt when you insert a platter. – waltinator 6 hours ago Try dmesg | grep -A8 CD-ROM which should show you what the system thought was available when it came up. – waltinator 6 hours ago here is my printout [0.774351] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-T40N A100 PQ: 0 ANSI: 5 [0.778117] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [0.778122] cdrom: Uniform CD-ROM driver Revision: 3.20 [0.778282] sr 0:0:0:0: Attached scsi CD-ROM sr0 [0.778340] sr 0:0:0:0: Attached scsi generic sg0 type 5 [0.780416] Freeing unused kernel memory: 984k freed [0.780732] Write protecting the kernel read-only data: 10240k [0.780986] Freeing unused kernel memory: 20k freed [0.786331] Freeing unused kernel memory: 1400k freed [0.804912] udevd[90]: starting version 173 [0.874178] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [0.874208] r8169 0000:02:00.0: PCI INT A - GSI 16 (level, low) - IRQ 16 OK, your system sees the drive. Can you open and close the tray with eject and eject -t? Run udevadm monitor while you insert a CD (type ^C when done) and see if you get "change" and "add" messages. – waltinator 6 hours ago ok, "eject" works perfectly "eject -t" does nothing. this is the message for "udevadm monitor": KERNEL[13771.009267] change /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sr0 (block) UDEV [13773.878887] change /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0 /block/sr0 (block) – Cisco Sán 6 hours ago sudo hwinfo --cdrom (the hwinfo package is installable through Software Center) describes my CD-ROM, try it. – waltinator 4 hours ago My read out from the "sudo hwinfo --cdrom" are the following: hal.1: read hal dataprocess 2753: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 280. This is normally a bug in some application using the D-Bus library. libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files 22: SCSI 00.0: 10602 CD-ROM (DVD) [Created at block.247] Unique ID: KD9E.JgkxTS4hgl2 Parent ID: 3p2J.gdUMCD83e+E SysFS ID: /class/block/sr0 SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0 Hardware Class: cdrom Model: "HL-DT-ST DVD+-RW GSA-T40N" Vendor: "HL-DT-ST" Device: "DVD+-RW GSA-T40N" Revision: "A100" Driver: "ata_piix", "sr" Driver Modules: "ata_piix" Device File: /dev/sr0 (/dev/sg0) Device Files: /dev/sr0, /dev/scd0, /dev/disk/by-id/ata-HL-DT-ST_DVD+_-RW_GSA-T40N_K048BJ74257, /dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:0:0, /dev/cdrom, /dev/cdrw, /dev/dvd, /dev/dvdrw Device Number: block 11:0 (char 21:0) Features: DVD Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (IDE interface) Drive Speed: 31 Volume ID: "Movie" Publisher: "INTERVIDEO" Creation date: "20050424162207000" Thanks for the help. To Castro, hope this is what you meant and sorry for the comments..

  Read the article

• ReSharper C# Live Template for Read-Only Dependency Property and Routed Event Boilerplate

  - by Bart Read

  Following on from my previous post, where I shared a Live Template for quickly declaring a normal read-write dependency property and its associated property change event boilerplate, here's an unsurprisingly similar template for creating a read-only dependency property.        #region $PROPNAME$ Read-Only Property and Property Change Routed Event        private static readonly DependencyPropertyKey $PROPNAME$PropertyKey =                                             DependencyProperty.RegisterReadOnly(             "$PROPNAME$", typeof ( $PROPTYPE$ ), typeof ( $DECLARING_TYPE$ ),             new PropertyMetadata( $DEF_VALUE$ , On$PROPNAME$Changed ) );       public static readonly DependencyProperty $PROPNAME$Property =                                           $PROPNAME$PropertyKey.DependencyProperty;        public $PROPTYPE$ $PROPNAME$         {             get { return ( $PROPTYPE$ ) GetValue( $PROPNAME$Property ); }             private set { SetValue( $PROPNAME$PropertyKey, value ); }         }       public static readonly RoutedEvent $PROPNAME$ChangedEvent   =                                           EventManager.RegisterRoutedEvent(           "$PROPNAME$Changed",           RoutingStrategy.$ROUTINGSTRATEGY$,           typeof( RoutedPropertyChangedEventHandler< $PROPTYPE$ > ),           typeof( $DECLARING_TYPE$ ) );       public event RoutedPropertyChangedEventHandler< $PROPTYPE$ > $PROPNAME$Changed       {           add { AddHandler( $PROPNAME$ChangedEvent, value ); }           remove { RemoveHandler( $PROPNAME$ChangedEvent, value ); }       }        private static void On$PROPNAME$Changed(           DependencyObject d, DependencyPropertyChangedEventArgs e)         {             var $DECLARING_TYPE_var$ = d as $DECLARING_TYPE$;            var args = new RoutedPropertyChangedEventArgs< $PROPTYPE$ >(               ( $PROPTYPE$ ) e.OldValue,               ( $PROPTYPE$ ) e.NewValue );           args.RoutedEvent    = $DECLARING_TYPE$.$PROPNAME$ChangedEvent;           $DECLARING_TYPE_var$.RaiseEvent( args );$END$        }        #endregion The only real difference here is the addition of the DependencyPropertyKey, which allows your implementation to set the value of the dependency property without exposing the setter code to consumers of your type. You'll probably find that you create read-only dependency properties much less often than read-write properties, but this should still save you some typing when you do need to do so. Technorati Tags: resharper,live template,c#,dependency property,read-only,routed events,property change,boilerplate,wpf

  Read the article

< Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >