address book - Page 288

Removing http301 redirect from client's cache

- by ChessWhiz

Hi, I have a server/client architecture where the client hits the ASP.NET server's service at a certain host name, IP address, and port. Without thinking, I logged on to the server and set up permanent HTTP301 redirection through IIS from that service to another URL that the machine handles via IIS (same IP and port), mistakenly thinking it was another site that is hosted there. When the client hit the server at the old host name, it cached the permanent redirect. Now, even though I have removed the redirection, the client no longer uses the old address. How can I clear the client's cache so that it no longer stores the redirect? I have read about how permanent HTTP301 can be, but in this case, it should be possible to reset a single client's knowledge of the incorrectly-learned host name. Any ideas?

Read the article

Laptops or Notebooks in a meeting? [closed]

- by greengit

Is taking the laptop to the meeting a good idea? Of course, the project leader needs to have one -- but the programmers -- especially those who only need to get straight instructions on what to do next on the project -- do they need to take laptops? I feel it takes longer to save notes in a software -- and it's lot easier to just jot down "things to do" in a simple note book. That way you can keep up with the discussion and not lose track of what someone else is saying by spending too much time entering text in the machine.

Read the article

Call a void* as a function without declaring a function pointer

- by ToxIk

I've searched but couldn't find any results (my terminology may be off) so forgive me if this has been asked before. I was wondering if there is an easy way to call a void* as a function in C without first declaring a function pointer and then assigning the function pointer the address; ie. assuming the function to be called is type void(void) void *ptr; ptr = <some address>; ((void*())ptr)(); /* call ptr as function here */ with the above code, I get error C2066: cast to function type is illegal in VC2008 If this is possible, how would the syntax differ for functions with return types and multiple parameters?

Read the article

Recommendations for books and training resources covering for Design for Programmers

- by Jon Hopkins

Off the back of one of the answers to this question (currently the second highest scoring), it made me think, what's the best way to get developers up to speed on good basic design principals. I'm not talking about making them into graphic designers but some developers almost take pride in ugly UIs, seeing them as unimportant next to the functionality. What primarily interested in are the graphic design elements rather than the usability aspects which is pretty well covered by books such as Don't Make Me Think. Use of white space, emphasis, font selection and a million other things I'm probably not even aware of. I know people are often seen as artistic or not artistic but surely the basics can be taught and someone has written a book covering this?

Read the article

Mapping of memory addresses to physical modules in Windows XP

- by Josef Grahn

I plan to run 32-bit Windows XP on a workstation with dual processors, based on Intel's Nehalem microarchitecture, and triple channel RAM. Even though XP is limited to 4 GB of RAM, my understanding is that it will function with more than 4 GB installed, but will only expose 4 GB (or slightly less). My question is: Assuming that 6 GB of RAM is installed in six 1 GB modules, which physical 4 GB will Windows actually map into its address space? In particular: Will it use all six 1 GB modules, taking advantage of all memory channels? (My guess is yes, and that the mapping to individual modules within a group happens in hardware.) Will it map 2 GB of address space to each of the two NUMA nodes (as each processor has it's own memory interface), or will one processor get fast access to 3 GB of RAM, while the other only has 1 GB? Thanks!

Read the article

jQuery: Simple menu

- by JamesBrownIsDead

I'm trying to learn jQuery by implementing a simple menu. I've got <div> elements that act as buttons and have links in them. I'm trying to add onclick events to the divs that navigate the browser to the link's address in the div. This is basically my pseudo-code. What would the real code be? How can I improve this? Any feedback appreciated! // Iterate over each menu button $('.masterHeaderMenuButton').each(function () { // Get the link in each button and set the button's onclick to // redirect to the link's address var url = $('a', this).attr('href'); this.click(function () { window.location.href = url; }); // If the user is on the page for the current button, hilight it if (window.location.href === url) { $('a', this).addClass("masterHeaderMenuButtonSelected"); } });

Read the article

Google authentication php

- by chidambaram.k

how do I get the user's account information (at least his Gmail address) after the authentication has passed?

Read the article

multiple polls with email submit function

- by Chris Mousdale

I want to add a 4 sets of polls that each have around 4 radio buttons each for answers - then i would like to add an 'enter your email address' field below these polls. Finally I would like the submit button after the email field to 'submit' the data from the polls and the email address entered - so only one submit button. Just to make things even better, I would like some form of validation, that will not pass the form unless all 4 polls have a radio button pressed and a valid email. All this is then to go into a MySQL database. I have the email validation bit nailed - so thats fine.. it's the multiple polls bit thats getting me - I cannot get it to work?! Do i have to effectively add 5 forms? Any help would be greatly appreciated.

Read the article

Designing persistence schema for BigTable on AppEngine

- by Vitalij Zadneprovskij

I have tried to design the datastore schema for a very small application. That schema would have been very simple, if not trivial, using a relational database with foreign keys, many-to-many relations, joins, etc. But the problem was that my application was targeted for Google App Engine and I had to design for a database that was not relational. At the end I gave up. Is there a book or an article that describes design principles for applications that are meant for such databases? The books that I have found are about programming for App Engine and they don't spend many words about database design principles.

Read the article

Java mail encoding

- by Argiropoulos Stavros

Using the code below i can send an email written in non-english and although the subject appears correctly the body appears as gibberish. Any ideas? Thank you public void postMail(String recipient, String subject, String message, String from) throws MessagingException, UnsupportedEncodingException { //Set the host smtp address Properties props = new Properties(); props.put("mail.smtp.host", "mail.infodim.gr"); // create some properties and get the default Session Session session = Session.getDefaultInstance(props, null); // create a message Message msg = new MimeMessage(session); // set the from and to address InternetAddress addressFrom = new InternetAddress(from); msg.setFrom(addressFrom); InternetAddress addressTo=new InternetAddress(recipient); msg.setRecipient(Message.RecipientType.TO, addressTo); // Setting the Subject and Content Type msg.setSubject(subject); msg.setContent(message, "text/plain"); Transport.send(msg); }

Read the article

How to make a memory dump in .net?

- by SDReyes

How do you obtain a memory dump from a given memory address in the format: Address | Hexadecimal representation | ASCII representation --------------------------------------------------------------------------------------- 0x637132687 | 00 00 00 00 00 00 00 00 45 21 65 78 32 F5 12 6C | ....... ahsnfdas 0x637132703 | 00 00 00 00 00 00 00 00 45 21 65 78 32 F5 12 6C | ....... ahsnfdas 0x637132719 | 00 00 00 00 00 00 00 00 45 21 65 78 32 F5 12 6C | ....... ahsnfdas 0x637132735 | 00 00 00 00 00 00 00 00 45 21 65 78 32 F5 12 6C | ....... ahsnfdas Do you know any API/framework/tool for the work?

Read the article

Next in Concurrency

- by Jatin

For past year I have been working a lot on concurrency in Java and have build and worked on many concurrent packages. So in terms of development in the concurrent world, I am quite confident. Further I am very much interested to learn and understand more about concurrent programming. But I am unable to answer myself what next? What extra should I learn or work on to inherit more skills related to Multi-core processing. If there is any nice book (read and enjoyed 'concurrency in practice' and 'concurrent programming in java') or resource's related to Multi-core processing so that I can go to the next level?

Read the article

How to learn to draw UML sequence diagrams

- by PeterT

How can I learn to draw UML sequence diagrams. Even though I don't use UML much I find that type of diagrams to be quite expressive and want to learn how to draw them. I don't plan to use them to visualise a large chunks of code, hence I would like to avoid using tools, and learn how to draw them with just pen and paper. Muscle memory is good. I guess I would need to learn some basics of notation first, and then just practice it like in "take the piece of code, draw a seq. diagram visualising the code, then generate the diagram using some tool/website, then compare what I'd drawn to what the tool result. Find the differences, correct them, repeat.". Where do I start? Can you recommend a book or a web site or something else?

Read the article

Interview with Ronald Bradford about MySQL Connect

- by Keith Larson

Ronald Bradford, an Oracle ACE Director has been busy working with database consulting, book writing (EffectiveMySQL) while traveling and speaking around the world in support of MySQL. I was able to take some of his time to get an interview on this thoughts about theMySQL Connect conference. Keith Larson: What where your thoughts when you heard that Oracle was going to provide the community the MySQL Conference ?Ronald Bradford: Oracle has already been providing various different local community events including OTN Tech Days and MySQL community days. These are great for local regions both in the US and abroad. In previous years there has been an increase of content at Oracle Open World, however that benefits the Oracle community far more then the MySQL community. It is good to see that Oracle is realizing the benefit in providing a large scale dedicated event for the MySQL community that includes speakers from the MySQL development teams, invested companies in the ecosystem and other community evangelists.I fully expect a successful event and look forward to hopefully seeing MySQL Connect at the upcoming Brazil and Japan OOW conferences and perhaps an event on the East Coast.Keith Larson: Since you are part of the content committee, what did you think of the submissions that were received during call for papers?Ronald Bradford: There was a large number of quality submissions to the number of available presentation sessions. As with the previous years as a committee member for the annual MySQL conference, there is always a large variety of common cornerstone MySQL features as well as new products and upcoming companies sharing their MySQL experiences. All of the usual major players in the ecosystem will in presenting at MySQL Connect including Facebook, Twitter, Yahoo, Continuent, Percona, Tokutek, Sphinx and Amazon to name a few. This is ensuring the event will have a large number of quality speakers and a difficult time in choosing what to attend. Keith Larson: What sessions do you look forwarding to attending? Ronald Bradford: As with most quality conferences you can only be in one place at one time, so with multiple tracks per session it is always difficult to decide. The continued work and success with MySQL Cluster, and with a number of sessions I am sure will be popular. The features that interest me the most are around the optimizer, where there are several sessions on new features, and on the importance of backups. There are three presentations in this area to choose from.Keith Larson: Are you going to cover any of the content in your books at your MySQL Connect sessions?Ronald Bradford: I will be giving two presentations at MySQL Connect. The first will include the techniques available for creating better indexes where I will be touching on some aspects of the first Effective MySQL book on Optimizing SQL Statements. In my second presentation from experiences of managing 500+ AWS MySQL instances, I will be touching on areas including SQL tuning, backup and recovery and scale out with replication. These are the key topics of the initial books in the Effective MySQL series that focus on performance, scalability and business continuity. The books however cover a far greater amount of detail then can be presented in a 1 hour session. Keith Larson: What features of MySQL 5.6 do you look forward to the most ?Ronald Bradford: I am very impressed with the optimizer trace feature. The ability to see exposed information is invaluable not just for MySQL 5.6, but to also apply information discerned for optimizing SQL statements in earlier versions of MySQL. Not everybody understands that it is easy to deploy a MySQL 5.6 slave into an existing topology running an older version if MySQL for evaluation of many new features. You can use the new mysqlbinlog streaming feature for duplicating master binary logs on an older version with a MySQL 5.6 slave. The improvements in instrumentation in the Performance Schema are exciting. However, as with my upcoming Replication Techniques in Depth title, that will be available for sale at MySQL Connect, there are numerous replication features, some long overdue with provide significant management benefits. Crash Save Slaves, Global transaction Identifiers (GTID) and checksums just to mention a few.Keith Larson: You have been to numerous conferences, what would you recommend for people at the conference? Ronald Bradford: Make the time to meet and introduce yourself to the speakers that cover the topics that most interest you. The MySQL ecosystem has a very strong community. The relationships you build with presenters, developers and architects in MySQL can be invaluable, however they are created over time. Get to know these people, interact with them over time. This is the opportunity to learn more then just the content from a 1 hour session. Keith Larson: Any additional tips to handling the long hours ? Ronald Bradford: Conferences can be hard, especially with all the post event drinking. This is a two day event and I am sure will include additional events on Friday and Saturday night so come well prepared, and leave work behind. Take the time to learn something new. You can always catchup on sleep later. Keith Larson: Thank you so much for taking some time to do this I look forward to seeing you at the MySQL Connect conference. Please stay tuned here for more updates on MySQL.

Read the article

Sql query problem

- by LiveEn

I have the below sql query that will update the the values from a form to the database $sql="update leads set category='$Category',type='$stype',contactName='$ContactName',email='$Email',phone='$Phone',altphone='$PhoneAlt',mobile='$Mobile',fax='$Fax',address='$Address',city='$City',country='$Country',DateEdited='$today',printed='$Printed',remarks='$Remarks' where id='$id'"; $result=mysql_query($sql) or die(mysql_error()); echo '<h1>Successfully Updated!!.</h1>'; when i submit I dont get any errors and the success message is displayed but the database isnt updated . When i echo the $sql, all the values are set properly. and when i ech the $result i get the value 1. can someone please tell me what am i doing wrong here??

Read the article

How does one improve one's problem-solving ability?

- by gcc

How can one improve one's problem-solving ability? Everyone says same thing: "a real programmer knows how to handle real problem." But they forget how they learn this ability, or where (I know in school, no one gives us any ability, of course in my opinion). If you have any idea except above ones, feel free when you give your advice solve more problems do more exercises, write code, search google then write more ... For me, my question is like "use complex/known library instead of using your own." In other words, I want your personal experience, book recommendation, webpage on problem solving. Moreover, look your problem-solving method and give us your personal ability as if it is an algorithm

Read the article

ESX3.5 Cluster & MD3000i -- Both servers see iSCSI Targets, Only one server can use partition.

- by GruffTech

Alright. First and foremost, Warning. This is a bigger-then-normal question. I like to be thorough and try to eliminate all possible "easymode" answers, as well as give everyone a feel of what i've tried. I've included several images of our setup and the problem it is having.. TLDR Version: So I've followed the guides located here: ESX Deployment Guide V1 this is the guide Dell has sent me to setup two ESX3.5 servers mounting a Dell MD3000i. It doesn't work. Both servers can't use the same storage partition on the MD3000. Both servers see it, but only one server can actually use it. (that server being whatever server created the partition on the target.) Both ESX servers are members of the Host Group. Full Version I have 2 ESX3.5 Servers (10.0.7.102, also called EPI2, and 10.0.7.103, also called EPI3.) connected to a iSCSI SAN Device (Dell MD3000i). Both ESX servers can "scan" the SAN and see the LUNS. Part One: MD3000i Storage On the MD3000i, Both servers are in my host group. I have two partitions, VM1 and VM2, both 1.6TB (vmware doesn't like anything past 2tb.) And you can even see that the ESX servers are targetting the MD3000 just fine. Part Two: The ESX Servers Figure 1. So as you can see above, Both ESX Servers (10.0.7.102 and 10.0.7.103) are able to see and scan the MD3000i SAN. Figure 2. Above is the storage both servers see. I created the storage partition on EPI2 (102). I then Extended the partition to include the second LUN for a grand total of 3.27 TB of storage. When i "rescan" on 103 (the server not mounting the partition), I get the below log in log/messages. Mar 11 10:41:18 epi3 kernel: scsi1: remove-single-device 0 0 0 failed, device busy(4). being the only line that grabs my attentions. (EPI3 is the server name) Mar 11 10:41:04 epi3 vmkiscsid[5436]: Connected to Discovery Address 192.168.130.101 Mar 11 10:41:04 epi3 vmkiscsid[5437]: Connected to Discovery Address 192.168.130.102 Mar 11 10:41:04 epi3 vmkiscsid[5438]: Connected to Discovery Address 192.168.131.101 Mar 11 10:41:04 epi3 vmkiscsid[5439]: Connected to Discovery Address 192.168.131.102 Mar 11 10:41:17 epi3 kernel: scsi singledevice 2 0 0 0 Mar 11 10:41:17 epi3 kernel: Vendor: DELL Model: MD3000i Rev: 0735 Mar 11 10:41:17 epi3 kernel: Type: Direct-Access ANSI SCSI revision: 05 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Supported VPD pages for sdb : 0x0 0x80 0x83 0x85 0x86 0x87 0xc0 0xc1 0xc2 0xc3 0xc4 0xc8 0xc9 0xca 0xd0 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Device id info for sdb: 0x1 0x3 0x0 0x10 0x60 0x1 0xe4 0xf0 0x0 0x1a 0x1a 0xa2 0x0 0x0 0x15 0xe2 0x4d 0x75 0xf6 0x99 0x53 0x98 0x0 0x54 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x2c 0x74 0x2c 0x30 0x78 0x30 0x30 0x30 0x31 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x32 0x0 0x0 0x0 0x51 0x94 0x0 0x4 0x0 0x0 0x80 0x1 0x53 0xa8 0x0 0x44 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x0 0x0 0x0 0x0 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Id for sdb 0x60 0x01 0xe4 0xf0 0x00 0x1a 0x1a 0xa2 0x00 0x00 0x15 0xe2 0x4d 0x75 0xf6 0x99 0x4d 0x44 0x33 0x30 0x30 0x30 Mar 11 10:41:17 epi3 kernel: VMWARE: Unique Device attached as scsi disk sdb at scsi2, channel 0, id 0, lun 0 Mar 11 10:41:17 epi3 kernel: Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Mar 11 10:41:17 epi3 kernel: scan_scsis starting finish Mar 11 10:41:17 epi3 kernel: SCSI device sdb: 3509329920 512-byte hdwr sectors (1797751 MB) Mar 11 10:41:17 epi3 kernel: sdb: sdb1 Mar 11 10:41:17 epi3 kernel: scan_scsis done with finish Mar 11 10:41:17 epi3 kernel: scsi singledevice 2 0 0 1 Mar 11 10:41:17 epi3 kernel: Vendor: DELL Model: MD3000i Rev: 0735 Mar 11 10:41:17 epi3 kernel: Type: Direct-Access ANSI SCSI revision: 05 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Supported VPD pages for sdc : 0x0 0x80 0x83 0x85 0x86 0x87 0xc0 0xc1 0xc2 0xc3 0xc4 0xc8 0xc9 0xca 0xd0 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Device id info for sdc: 0x1 0x3 0x0 0x10 0x60 0x1 0xe4 0xf0 0x0 0x1a 0x1a 0x86 0x0 0x0 0xd 0xb7 0x4d 0x75 0xf2 0x77 0x53 0x98 0x0 0x54 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x2c 0x74 0x2c 0x30 0x78 0x30 0x30 0x30 0x31 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x32 0x0 0x0 0x0 0x51 0x94 0x0 0x4 0x0 0x0 0x80 0x1 0x53 0xa8 0x0 0x44 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x0 0x0 0x0 0x0 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Id for sdc 0x60 0x01 0xe4 0xf0 0x00 0x1a 0x1a 0x86 0x00 0x00 0x0d 0xb7 0x4d 0x75 0xf2 0x77 0x4d 0x44 0x33 0x30 0x30 0x30 Mar 11 10:41:18 epi3 kernel: VMWARE: Unique Device attached as scsi disk sdc at scsi2, channel 0, id 0, lun 1 Mar 11 10:41:18 epi3 kernel: Attached scsi disk sdc at scsi2, channel 0, id 0, lun 1 Mar 11 10:41:18 epi3 kernel: scan_scsis starting finish Mar 11 10:41:18 epi3 kernel: SCSI device sdc: 3509329920 512-byte hdwr sectors (1797751 MB) Mar 11 10:41:18 epi3 kernel: sdc: sdc1 Mar 11 10:41:18 epi3 kernel: scan_scsis done with finish Mar 11 10:41:18 epi3 kernel: scsi1: remove-single-device 0 0 0 failed, device busy(4). Mar 11 10:41:18 epi3 kernel: scsi singledevice 1 0 0 0 Things I've Tried: Removing iSCSI targets from only 103, disabling iSCSI, rebooting, enabled iSCSI, re-adding targets, rescan. Same result. Removing partition on 102, Formatted partition on 103 instead. Same result, except flipped. 103 can use storage, 102 can not. Starting Over. Removing all iSCSI Targets on both ESX Boxes, disabling iSCSI, turning off the firewall for iSCSI, rebooting ESX. Then on the MD3000, Removed the Host Group, Removed the Host-to-Virtual Mappings, Restarted the SAN. Followed the Documentation again, same result. Both servers see the storage, but only one server can use it. Disabling and Re-enabling VMware DRS and HA. Same result. Flat-out turning off VMware DRS and HA, and doing the "start over" step to see if maybe that borked it. Same Result. I'm kinda loosing my mind here, Everything i read online says "just partition it and if the ESX boxes can see the targets, it just works".... well crap. Any ideas, any other things to try? Can anyone atleast point me in the right direction? I'm really tired of working from 1am til 4am (our maintenance hours)

Read the article

What is the best way to learn Cocos2D?

- by Joey Green

I've messed around with iPhone development for a couple years now. I've done some contract work. I want to get into Cocos2D to develop a game idea that I have. I was wondering what might be the best/quickest way to get up in running in cocos2d? I've thought about a book, but I wondering if that is needed? I'm the type of guy that just wants to know what everything does and is suppose to be used for. Any ideas?

Read the article

SPARC T5-4 LDoms for RAC and WebLogic Clusters

- by Jeff Taylor-Oracle

I wanted to use two Oracle SPARC T5-4 servers to simultaneously host both Oracle RAC and a WebLogic Server Cluster. I chose to use Oracle VM Server for SPARC to create a cluster like this: There are plenty of trade offs and decisions that need to be made, for example: Rather than configuring the system by hand, you might want to use an Oracle SuperCluster T5-8 My configuration is similar to jsavit's: Availability Best Practices - Example configuring a T5-8 but I chose to ignore some of the advice. Maybe I should have included an alternate service domain, but I decided that I already had enough redundancy Both Oracle SPARC T5-4 servers were to be configured like this: Cntl 0.25 4 64GB App LDom 2.75 CPU's 44 cores 704 GB DB LDom One CPU 16 cores 256 GB The systems started with everything in the primary domain: # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL NORM UPTIME primary active -n-c-- UART 512 1023G 0.0% 0.0% 11m # ldm list-spconfig factory-default [current] primary # ldm list -o core,memory,physio NAME primary CORE CID CPUSET 0 (0, 1, 2, 3, 4, 5, 6, 7) 1 (8, 9, 10, 11, 12, 13, 14, 15) 2 (16, 17, 18, 19, 20, 21, 22, 23) -- SNIP 62 (496, 497, 498, 499, 500, 501, 502, 503) 63 (504, 505, 506, 507, 508, 509, 510, 511) MEMORY RA PA SIZE 0x30000000 0x30000000 255G 0x80000000000 0x80000000000 256G 0x100000000000 0x100000000000 256G 0x180000000000 0x180000000000 256G # Give this memory block to the DB LDom IO DEVICE PSEUDONYM OPTIONS pci@300 pci_0 pci@340 pci_1 pci@380 pci_2 pci@3c0 pci_3 pci@400 pci_4 pci@440 pci_5 pci@480 pci_6 pci@4c0 pci_7 pci@300/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE1 pci@300/pci@1/pci@0/pci@c /SYS/RCSA/PCIE2 pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0 pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0 pci@340/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE3 pci@340/pci@1/pci@0/pci@c /SYS/RCSA/PCIE4 pci@380/pci@1/pci@0/pci@a /SYS/RCSA/PCIE9 pci@380/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE10 pci@3c0/pci@1/pci@0/pci@e /SYS/RCSA/PCIE11 pci@3c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE12 pci@400/pci@1/pci@0/pci@e /SYS/RCSA/PCIE5 pci@400/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE6 pci@440/pci@1/pci@0/pci@e /SYS/RCSA/PCIE7 pci@440/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE8 pci@480/pci@1/pci@0/pci@a /SYS/RCSA/PCIE13 pci@480/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE14 pci@4c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE15 pci@4c0/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE16 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2 Added an additional service processor configuration: # ldm add-spconfig split # ldm list-spconfig factory-default primary split [current] And removed many of the resources from the primary domain: # ldm start-reconf primary # ldm set-core 4 primary # ldm set-memory 32G primary # ldm rm-io pci@340 primary # ldm rm-io pci@380 primary # ldm rm-io pci@3c0 primary # ldm rm-io pci@400 primary # ldm rm-io pci@440 primary # ldm rm-io pci@480 primary # ldm rm-io pci@4c0 primary # init 6 Needed to add resources to the guest domains: # ldm add-domain db # ldm set-core cid=`seq -s"," 48 63` db # ldm add-memory mblock=0x180000000000:256G db # ldm add-io pci@480 db # ldm add-io pci@4c0 db # ldm add-domain app # ldm set-core 44 app # ldm set-memory 704G app # ldm add-io pci@340 app # ldm add-io pci@380 app # ldm add-io pci@3c0 app # ldm add-io pci@400 app # ldm add-io pci@440 app Needed to set up services: # ldm add-vds primary-vds0 primary # ldm add-vcc port-range=5000-5100 primary-vcc0 primary Needed to add a virtual network port for the WebLogic application domain: # ipadm NAME CLASS/TYPE STATE UNDER ADDR lo0 loopback ok -- -- lo0/v4 static ok -- ... lo0/v6 static ok -- ... net0 ip ok -- ... net0/v4 static ok -- xxx.xxx.xxx.xxx/24 net0/v6 addrconf ok -- .... net0/v6 addrconf ok -- ... net8 ip ok -- -- net8/v4 static ok -- ... # dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE net1 Ethernet unknown 0 unknown ixgbe1 net0 Ethernet up 1000 full ixgbe0 net8 Ethernet up 10 full usbecm2 # ldm add-vsw net-dev=net0 primary-vsw0 primary # ldm add-vnet vnet1 primary-vsw0 app Needed to add a virtual disk to the WebLogic application domain: # format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0t5000CCA02505F874d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02505f874 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD0/disk 1. c0t5000CCA02506C468d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02506c468 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD1/disk 2. c0t5000CCA025067E5Cd0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca025067e5c /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD2/disk 3. c0t5000CCA02506C258d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02506c258 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD3/disk Specify disk (enter its number): ^C # ldm add-vdsdev /dev/dsk/c0t5000CCA02506C468d0s2 HDD1@primary-vds0 # ldm add-vdisk HDD1 HDD1@primary-vds0 app Add some additional spice to the pot: # ldm set-variable auto-boot\\?=false db # ldm set-variable auto-boot\\?=false app # ldm set-var boot-device=HDD1 app Bind the logical domains: # ldm bind db # ldm bind app At the end of the process, the system is set up like this: # ldm list -o core,memory,physio NAME primary CORE CID CPUSET 0 (0, 1, 2, 3, 4, 5, 6, 7) 1 (8, 9, 10, 11, 12, 13, 14, 15) 2 (16, 17, 18, 19, 20, 21, 22, 23) 3 (24, 25, 26, 27, 28, 29, 30, 31) MEMORY RA PA SIZE 0x30000000 0x30000000 32G IO DEVICE PSEUDONYM OPTIONS pci@300 pci_0 pci@300/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE1 pci@300/pci@1/pci@0/pci@c /SYS/RCSA/PCIE2 pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0 pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0 ------------------------------------------------------------------------------ NAME app CORE CID CPUSET 4 (32, 33, 34, 35, 36, 37, 38, 39) 5 (40, 41, 42, 43, 44, 45, 46, 47) 6 (48, 49, 50, 51, 52, 53, 54, 55) 7 (56, 57, 58, 59, 60, 61, 62, 63) 8 (64, 65, 66, 67, 68, 69, 70, 71) 9 (72, 73, 74, 75, 76, 77, 78, 79) 10 (80, 81, 82, 83, 84, 85, 86, 87) 11 (88, 89, 90, 91, 92, 93, 94, 95) 12 (96, 97, 98, 99, 100, 101, 102, 103) 13 (104, 105, 106, 107, 108, 109, 110, 111) 14 (112, 113, 114, 115, 116, 117, 118, 119) 15 (120, 121, 122, 123, 124, 125, 126, 127) 16 (128, 129, 130, 131, 132, 133, 134, 135) 17 (136, 137, 138, 139, 140, 141, 142, 143) 18 (144, 145, 146, 147, 148, 149, 150, 151) 19 (152, 153, 154, 155, 156, 157, 158, 159) 20 (160, 161, 162, 163, 164, 165, 166, 167) 21 (168, 169, 170, 171, 172, 173, 174, 175) 22 (176, 177, 178, 179, 180, 181, 182, 183) 23 (184, 185, 186, 187, 188, 189, 190, 191) 24 (192, 193, 194, 195, 196, 197, 198, 199) 25 (200, 201, 202, 203, 204, 205, 206, 207) 26 (208, 209, 210, 211, 212, 213, 214, 215) 27 (216, 217, 218, 219, 220, 221, 222, 223) 28 (224, 225, 226, 227, 228, 229, 230, 231) 29 (232, 233, 234, 235, 236, 237, 238, 239) 30 (240, 241, 242, 243, 244, 245, 246, 247) 31 (248, 249, 250, 251, 252, 253, 254, 255) 32 (256, 257, 258, 259, 260, 261, 262, 263) 33 (264, 265, 266, 267, 268, 269, 270, 271) 34 (272, 273, 274, 275, 276, 277, 278, 279) 35 (280, 281, 282, 283, 284, 285, 286, 287) 36 (288, 289, 290, 291, 292, 293, 294, 295) 37 (296, 297, 298, 299, 300, 301, 302, 303) 38 (304, 305, 306, 307, 308, 309, 310, 311) 39 (312, 313, 314, 315, 316, 317, 318, 319) 40 (320, 321, 322, 323, 324, 325, 326, 327) 41 (328, 329, 330, 331, 332, 333, 334, 335) 42 (336, 337, 338, 339, 340, 341, 342, 343) 43 (344, 345, 346, 347, 348, 349, 350, 351) 44 (352, 353, 354, 355, 356, 357, 358, 359) 45 (360, 361, 362, 363, 364, 365, 366, 367) 46 (368, 369, 370, 371, 372, 373, 374, 375) 47 (376, 377, 378, 379, 380, 381, 382, 383) MEMORY RA PA SIZE 0x30000000 0x830000000 192G 0x4000000000 0x80000000000 256G 0x8080000000 0x100000000000 256G IO DEVICE PSEUDONYM OPTIONS pci@340 pci_1 pci@380 pci_2 pci@3c0 pci_3 pci@400 pci_4 pci@440 pci_5 pci@340/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE3 pci@340/pci@1/pci@0/pci@c /SYS/RCSA/PCIE4 pci@380/pci@1/pci@0/pci@a /SYS/RCSA/PCIE9 pci@380/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE10 pci@3c0/pci@1/pci@0/pci@e /SYS/RCSA/PCIE11 pci@3c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE12 pci@400/pci@1/pci@0/pci@e /SYS/RCSA/PCIE5 pci@400/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE6 pci@440/pci@1/pci@0/pci@e /SYS/RCSA/PCIE7 pci@440/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE8 ------------------------------------------------------------------------------ NAME db CORE CID CPUSET 48 (384, 385, 386, 387, 388, 389, 390, 391) 49 (392, 393, 394, 395, 396, 397, 398, 399) 50 (400, 401, 402, 403, 404, 405, 406, 407) 51 (408, 409, 410, 411, 412, 413, 414, 415) 52 (416, 417, 418, 419, 420, 421, 422, 423) 53 (424, 425, 426, 427, 428, 429, 430, 431) 54 (432, 433, 434, 435, 436, 437, 438, 439) 55 (440, 441, 442, 443, 444, 445, 446, 447) 56 (448, 449, 450, 451, 452, 453, 454, 455) 57 (456, 457, 458, 459, 460, 461, 462, 463) 58 (464, 465, 466, 467, 468, 469, 470, 471) 59 (472, 473, 474, 475, 476, 477, 478, 479) 60 (480, 481, 482, 483, 484, 485, 486, 487) 61 (488, 489, 490, 491, 492, 493, 494, 495) 62 (496, 497, 498, 499, 500, 501, 502, 503) 63 (504, 505, 506, 507, 508, 509, 510, 511) MEMORY RA PA SIZE 0x80000000 0x180000000000 256G IO DEVICE PSEUDONYM OPTIONS pci@480 pci_6 pci@4c0 pci_7 pci@480/pci@1/pci@0/pci@a /SYS/RCSA/PCIE13 pci@480/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE14 pci@4c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE15 pci@4c0/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE16 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2 Start the domains: # ldm start app LDom app started # ldm start db LDom db started Make sure to start the vntsd service that was created, above. # svcs -a | grep ldo disabled 8:38:38 svc:/ldoms/vntsd:default online 8:38:58 svc:/ldoms/agents:default online 8:39:25 svc:/ldoms/ldmd:default # svcadm enable vntsd Now use the MAC address to configure the Solaris 11 Automated Installation. Database Logical Domain # telnet localhost 5000 {0} ok devalias screen /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@7/display@0 disk7 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p3 disk6 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p2 disk5 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p1 disk4 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p0 scsi1 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0 net3 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0,1 net2 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 virtual-console /virtual-devices/console@1 name aliases {0} ok boot net2 Boot device: /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 File and args: 1000 Mbps full duplex Link up Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx WLS Logical Domain # telnet localhost 5001 {0} ok devalias hdd1 /virtual-devices@100/channel-devices@200/disk@0 vnet1 /virtual-devices@100/channel-devices@200/network@0 net /virtual-devices@100/channel-devices@200/network@0 disk /virtual-devices@100/channel-devices@200/disk@0 virtual-console /virtual-devices/console@1 name aliases {0} ok boot net Boot device: /virtual-devices@100/channel-devices@200/network@0 File and args: Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx Repeat the process for the second SPARC T5-4, install Solaris, RAC and WebLogic Cluster, and you are ready to go. Maybe buying a SuperCluster would have been easier.

Read the article

Resources for game networking in Java

- by pudelhund

I am currently working on a Java multiplayer game. The game itself (single player) already works perfectly fine and so does the chat. The only thing that is really missing is the multiplayer part. Sadly I am absolutely clueless on where to start with that. I roughly know that I will have to work with packages, and I also know many things about streaming etc (chat is already working). Oh and it should - according to this article - be a UDP server. My problem is that I can't find any resources on how to do this. A tutorial (book or website) would be perfect, alternatively a good example of an open source client/server (in Java of course) would be fine as well. If you feel like doing something helpful I'd also really appreciate someone "privately" teaching me via email or some chat program :) Thank you!

Read the article

South Florida Code Camp 2011 - 02/12/2011 - Final Days to register

- by Nikita Polyakov

South Florida Code Camp - 02/12/2011 - Final Days to register 13 tracks, 78 sessions, 65 speakers Topics include: Windows Phone 7, Silverlight, Web dev, Architecture/Agile, Sharepoint and SQL Networking with 700 other software developers, over 800 already registered! Free breakfast and lunch Hobnob with speakers, MVP's and authors Party afterwards with attendees and speakers Convenient location at Nova University in Davie Free XBOX 360 Kinect 250 GB raffle (must be present) Free raffle of valuable software, books and swag Free Code Camp T-shirt Book swap - see site for details You get to say "I was there!" More information: http://www.fladotnet.com/codecamp Register now at: https://www.clicktoattend.com/invitation.aspx?code=150628 (some people have had a problem with this link but click again and it should work). I am presenting Windows Phone Marketplace session. Marketplace and Monetization Details of Windows Phone Marketplace and using Microsoft Advertising SDK control. Monetization strategies, rules and tips for making the best out of your post writing the Windows Phone app experience. Many speakers end up hanging out in the back and this session turns into a open discussion panel.

Read the article

Just updated, after reboot my computer won't start up again

- by Alex

I have a macbook that I use on occasion which dual boots Ubuntu and OSX (It has rEFIt installed). I turned it on for the first time in a while and it needed a bunch of updates. So I let it run, and restarted it when it asked. When it was booting up, it got stuck at a light blue screen. There was nothing on the screen to indicate that it was doing anything - I figured it just got stuck or something, so I turned it off and back on. (I suspect now it was actually working, but I had no indication that it hadn't just frozen) Now I can't access either OSX or my Ubuntu partition. When I choose ubuntu on the rEFIt menu, it shows "No bootable device -- insert book disk and press key". If I try to start up OSX is looks like it starts loading, but instead of an apple logo there's a crossed out circle icon.

Read the article

Abstract class + Inheritance vs Interface

- by RealityDysfunction

Hello fellow programmers, I am reading a book on C# and the author is comparing Abstract classes and Interfaces. He claims that if you have the following "abstract class:" abstract class CloneableType { public abstract object Clone(); } Then you cannot do this: public class MiniVan : Car, CloneableType {} This, I understand. However he claims that because of this inability to do multiple inheritance that you should use an interface for CloneableType, like so: public interface ICloneable { object Clone(); } My question is, isn't this somewhat misleading, because you can create an abstract class which is "above" class Car with the method Clone, then have Car inherit that class and then Minivan will inherit Car with all these methods, CloneAble class - Car class - Minivan Class. What do you think? Thanks.

Read the article

Default Values in XForms Input

- by Josh

I have an XForm that has certain fields that may often be left blank (optional street address). Is there is technique to set a default value for that field, preferably a space (I am running into weird formatting issues with CSS). The html form way of value="" doesn't work, neither does setting a default value in the XML schema. EXAMPLE: <xforms:input ref="clientaddress/streetaddress2" model="model_inventory" > <xforms:label>Street Address (Line 2)</xforms:label> Leaving this field blank results in <streetaddress2/> in the resulting xml document I want <streetaddress> </streetaddress>

Read the article

Windows Azure Recipe: Software as a Service (SaaS)

- by Clint Edmonson

The cloud was tailor built for aspiring companies to create innovative internet based applications and solutions. Whether you’re a garage startup with very little capital or a Fortune 1000 company, the ability to quickly setup, deliver, and iterate on new products is key to capturing market and mind share. And if you can capture that share and go viral, having resiliency and infinite scale at your finger tips is great peace of mind. Drivers Cost avoidance Time to market Scalability Solution Here’s a sketch of how a basic Software as a Service solution might be built out: Ingredients Web Role – this hosts the core web application. Each web role will host an instance of the software and as the user base grows, additional roles can be spun up to meet demand. Access Control – this service is essential to managing user identity. It’s backed by a full blown implementation of Active Directory and allows the definition and management of users, groups, and roles. A pre-built ASP.NET membership provider is included in the training kit to leverage this capability but it’s also flexible enough to be combined with external Identity providers including Windows LiveID, Google, Yahoo!, and Facebook. The provider model provides extensibility to hook into other industry specific identity providers as well. Databases – nearly every modern SaaS application is backed by a relational database for its core operational data. If the solution is sold to organizations, there’s a good chance multi-tenancy will be needed. An emerging best practice for SaaS applications is to stand up separate SQL Azure database instances for each tenant’s proprietary data to ensure isolation from other tenants. Worker Role – this is the best place to handle autonomous background processing such as data aggregation, billing through external services, and other specialized tasks that can be performed asynchronously. Placing these tasks in a worker role frees the web roles to focus completely on user interaction and data input and provides finer grained control over the system’s scalability and throughput. Caching (optional) – as a web site traffic grows caching can be leveraged to keep frequently used read-only, user specific, and application resource data in a high-speed distributed in-memory for faster response times and ultimately higher scalability without spinning up more web and worker roles. It includes a token based security model that works alongside the Access Control service. Blobs (optional) – depending on the nature of the software, users may be creating or uploading large volumes of heterogeneous data such as documents or rich media. Blob storage provides a scalable, resilient way to store terabytes of user data. The storage facilities can also integrate with the Access Control service to ensure users’ data is delivered securely. Training & Examples These links point to online Windows Azure training labs and examples where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. Developing Applications for the Cloud, 2nd Edition (eBook) This book demonstrates how you can create from scratch a multi-tenant, Software as a Service (SaaS) application to run in the cloud using the latest versions of the Windows Azure Platform and tools. The book is intended for any architect, developer, or information technology (IT) professional who designs, builds, or operates applications and services that run on or interact with the cloud. Fabrikam Shipping (SaaS reference application) This is a full end to end sample scenario which demonstrates how to use the Windows Azure platform for exposing an application as a service. We developed this demo just as you would: we had an existing on-premises sample, Fabrikam Shipping, and we wanted to see what it would take to transform it in a full subscription based solution. The demo you find here is the result of that investigation See my Windows Azure Resource Guide for more guidance on how to get started, including more links web portals, training kits, samples, and blogs related to Windows Azure.

Search Results

Search found 19350 results on 774 pages for 'address book'.

Page 288/774 | < Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295 | Next Page >

- by ChessWhiz

- by greengit

- by ToxIk

- by Jon Hopkins

- by Josef Grahn

- by JamesBrownIsDead

- by chidambaram.k

- by Chris Mousdale

- by Vitalij Zadneprovskij

- by Argiropoulos Stavros

- by SDReyes

- by Jatin

- by PeterT

- by Keith Larson

- by LiveEn

- by gcc

- by GruffTech

- by Joey Green

- by Jeff Taylor-Oracle

- by pudelhund

- by Nikita Polyakov

- by Alex

- by RealityDysfunction

- by Josh

- by Clint Edmonson

< Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295 | Next Page >