Search Results

Search found 7299 results on 292 pages for 'peter short'.

Page 29/292 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

  • How to configure LocalSessionFactoryBean to release connections after transaction end?

    - by peter
    I am testing an application (Spring 2.5, Hibernate 3.5.0 Beta, Atomikos 3.6.2, and Postgreql 8.4.2) with the configuration for the DAO listed below. The problem that I see is that the pool of 10 connections with the dataSource gets exhausted after the 10's transaction. I know 'hibernate.connection.release_mode' has no effect unless the session is obtained with openSession rather then using a contextual session. I am wandering if anyone has found a way to configure the LocalSessionFactoryBean to release connections after any transaction. Thank you Peter <bean id="dataSource" class="com.atomikos.jdbc.AtomikosDataSourceBean" init-method="init" destroy-method="close"> <property name="uniqueResourceName"><value>XADBMS</value></property> <property name="xaDataSourceClassName"> <value>org.postgresql.xa.PGXADataSource</value> </property> <property name="xaProperties"> <props> <prop key="databaseName">${jdbc.name}</prop> <prop key="serverName">${jdbc.server}</prop> <prop key="portNumber">${jdbc.port}</prop> <prop key="user">${jdbc.username}</prop> <prop key="password">${jdbc.password}</prop> </props> </property> <property name="poolSize"><value>10</value></property> </bean> <bean id="sessionFactory" class="org.springframework.orm.hibernate3.LocalSessionFactoryBean"> <property name="dataSource"> <ref bean="dataSource" /> </property> <property name="mappingResources"> <list> <value>Abc.hbm.xml</value> </list> </property> <property name="hibernateProperties"> <props> <prop key="hibernate.dialect">org.hibernate.dialect.PostgreSQLDialect</prop> <prop key="hibernate.show_sql">on</prop> <prop key="hibernate.format_sql">true</prop> <prop key="hibernate.connection.isolation">3</prop> <prop key="hibernate.current_session_context_class">jta</prop> <prop key="hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</prop> <prop key="hibernate.transaction.manager_lookup_class">com.atomikos.icatch.jta.hibernate3.TransactionManagerLookup</prop> <prop key="hibernate.connection.release_mode">auto</prop> <prop key="hibernate.transaction.auto_close_session">true</prop> </props> </property> </bean> <!-- Transaction definition here --> <bean id="userTransactionService" class="com.atomikos.icatch.config.UserTransactionServiceImp" init-method="init" destroy-method="shutdownForce"> <constructor-arg> <props> <prop key="com.atomikos.icatch.service"> com.atomikos.icatch.standalone.UserTransactionServiceFactory </prop> </props> </constructor-arg> </bean> <!-- Construct Atomikos UserTransactionManager, needed to configure Spring --> <bean id="AtomikosTransactionManager" class="com.atomikos.icatch.jta.UserTransactionManager" init-method="init" destroy-method="close" depends-on="userTransactionService"> <property name="forceShutdown" value="false" /> </bean> <!-- Also use Atomikos UserTransactionImp, needed to configure Spring --> <bean id="AtomikosUserTransaction" class="com.atomikos.icatch.jta.UserTransactionImp" depends-on="userTransactionService"> <property name="transactionTimeout" value="300" /> </bean> <!-- Configure the Spring framework to use JTA transactions from Atomikos --> <bean id="txManager" class="org.springframework.transaction.jta.JtaTransactionManager" depends-on="userTransactionService"> <property name="transactionManager" ref="AtomikosTransactionManager" /> <property name="userTransaction" ref="AtomikosUserTransaction" /> </bean> <!-- the transactional advice (what 'happens'; see the <aop:advisor/> bean below) --> <tx:advice id="txAdvice" transaction-manager="txManager"> <tx:attributes> <!-- all methods starting with 'get' are read-only --> <tx:method name="get*" read-only="true" propagation="REQUIRED"/> <!-- other methods use the default transaction settings (see below) --> <tx:method name="*" propagation="REQUIRED"/> </tx:attributes> </tx:advice> <aop:config> <aop:advisor pointcut="execution(* *.*.AbcDao.*(..))" advice-ref="txAdvice"/> </aop:config> <!-- DAO objects --> <bean id="abcDao" class="test.dao.impl.HibernateAbcDao" scope="singleton"> <property name="sessionFactory" ref="sessionFactory"/> </bean>

    Read the article

  • Atomikos with Hibernate will exhaust db connections

    - by peter
    I am testing an application (Spring 2.5, Hibernate 3.5.0 Beta, Atomikos 3.6.2, and Postgreql 8.4.2) with the configuration for the DAO listed below. The problem that I see is that the pool of 10 connections with the dataSource gets exhausted after the 10's transaction. I know 'hibernate.connection.release_mode' has no effect unless the session is obtained with openSession rather then using a contextual session. I am wandering if anyone has found a way to instruct atomikos code to release connections after any transaction. Thank you Peter <bean id="dataSource" class="com.atomikos.jdbc.AtomikosDataSourceBean" init-method="init" destroy-method="close"> <property name="uniqueResourceName"><value>XADBMS</value></property> <property name="xaDataSourceClassName"> <value>org.postgresql.xa.PGXADataSource</value> </property> <property name="xaProperties"> <props> <prop key="databaseName">${jdbc.name}</prop> <prop key="serverName">${jdbc.server}</prop> <prop key="portNumber">${jdbc.port}</prop> <prop key="user">${jdbc.username}</prop> <prop key="password">${jdbc.password}</prop> </props> </property> <property name="poolSize"><value>10</value></property> </bean> <bean id="sessionFactory" class="org.springframework.orm.hibernate3.LocalSessionFactoryBean"> <property name="dataSource"> <ref bean="dataSource" /> </property> <property name="mappingResources"> <list> <value>Abc.hbm.xml</value> </list> </property> <property name="hibernateProperties"> <props> <prop key="hibernate.dialect">org.hibernate.dialect.PostgreSQLDialect</prop> <prop key="hibernate.show_sql">on</prop> <prop key="hibernate.format_sql">true</prop> <prop key="hibernate.connection.isolation">3</prop> <prop key="hibernate.current_session_context_class">jta</prop> <prop key="hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</prop> <prop key="hibernate.transaction.manager_lookup_class">com.atomikos.icatch.jta.hibernate3.TransactionManagerLookup</prop> <prop key="hibernate.connection.release_mode">auto</prop> <prop key="hibernate.current_session_context_class">org.hibernate.context.JTASessionContext</prop> <prop key="hibernate.transaction.auto_close_session">true</prop> </props> </property> </bean> <!-- Transaction definition here --> <bean id="userTransactionService" class="com.atomikos.icatch.config.UserTransactionServiceImp" init-method="init" destroy-method="shutdownForce"> <constructor-arg> <props> <prop key="com.atomikos.icatch.service"> com.atomikos.icatch.standalone.UserTransactionServiceFactory </prop> </props> </constructor-arg> </bean> <!-- Construct Atomikos UserTransactionManager, needed to configure Spring --> <bean id="AtomikosTransactionManager" class="com.atomikos.icatch.jta.UserTransactionManager" init-method="init" destroy-method="close" depends-on="userTransactionService"> <property name="forceShutdown" value="false" /> </bean> <!-- Also use Atomikos UserTransactionImp, needed to configure Spring --> <bean id="AtomikosUserTransaction" class="com.atomikos.icatch.jta.UserTransactionImp" depends-on="userTransactionService"> <property name="transactionTimeout" value="300" /> </bean> <!-- Configure the Spring framework to use JTA transactions from Atomikos --> <bean id="txManager" class="org.springframework.transaction.jta.JtaTransactionManager" depends-on="userTransactionService"> <property name="transactionManager" ref="AtomikosTransactionManager" /> <property name="userTransaction" ref="AtomikosUserTransaction" /> </bean> <!-- the transactional advice (what 'happens'; see the <aop:advisor/> bean below) --> <tx:advice id="txAdvice" transaction-manager="txManager"> <tx:attributes> <!-- all methods starting with 'get' are read-only --> <tx:method name="get*" read-only="true" propagation="REQUIRED"/> <!-- other methods use the default transaction settings (see below) --> <tx:method name="*" propagation="REQUIRED"/> </tx:attributes> </tx:advice> <aop:config> <aop:advisor pointcut="execution(* *.*.AbcDao.*(..))" advice-ref="txAdvice"/> </aop:config> <!-- DAO objects --> <bean id="abcDao" class="test.dao.impl.HibernateAbcDao" scope="singleton"> <property name="sessionFactory" ref="sessionFactory"/> </bean>

    Read the article

  • Full-text indexing? You must read this

    - by Kyle Hatlestad
    For those of you who may have missed it, Peter Flies, Principal Technical Support Engineer for WebCenter Content, gave an excellent webcast on database searching and indexing in WebCenter Content.  It's available for replay along with a download of the slidedeck.  Look for the one titled 'WebCenter Content: Database Searching and Indexing'. One of the items he led with...and concluded with...was a recommendation on optimizing your search collection if you are using full-text searching with the Oracle database.  This can greatly improve your search performance.  And this would apply to both Oracle Text Search and DATABASE.FULLTEXT search methods.  Peter describes how a collection can become fragmented over time as content is added, updated, and deleted.  Just like you should defragment your hard drive from time to time to get your files placed on the disk in the most optimal way, you should do the same for the search collection. And optimizing the collection is just a simple procedure call that can be scheduled to be run automatically.   [Read more] 

    Read the article

  • Visual Studio ALM MVP of the Year 2011

    - by Martin Hinshelwood
    For some reason this year some of my peers decided to vote for me as a contender for Visual Studio ALM MVP of the year. I am not sure what I did to deserve this, but a number of people have commented that I have a rather useful blog. I feel wholly unworthy to join the ranks of previous winners: Ed Blankenship (2010) Martin Woodward (2009) Thank you to everyone who voted regardless of who you voted for. If there was a prize for the best group of MVP’s then the Visual Studio ALM MVP would be a clear winner, as would the product group of product groups that is Visual Studio ALM Group. To use a phrase that I have learned since moving to Seattle and probably use too much: you guys are all just awesome. I have tried my best in the last year to document not only every problem that I have had with Team Foundation Server (TFS), but also to document as many of the things I am doing as possible. I have taken some of Adam Cogan’s rules to heart and when a customer asks me a question I always blog the answer and send them a link. This allows both my blog and my understanding of TFS to grow while creating a useful bank of content. The idea is that if one customer asks, all benefit. I try, when writing for my blog, to capture both the essence and the context for a problem being solved. This allows more people to benefit as they do not need to understand the specifics of an environment to gain value. I have a number of goals for this year that I think will help increase value in the community: persuade my new colleagues at Northwest Cadence to do more blogging (Steve, Jeff, Shad and Rennie) Rangers Project – TFS Iteration Automation with Willy-Peter Schaub, Bill Essary, Martin Hinshelwood, Mike Fourie, Jeff Bramwell and Brian Blackman Write a book on the Team Foundation Server API with Willy-Peter Schaub, Mike Fourie and Jeff Bramwell write more useful blog posts I do not think that these things are beyond the realms of do-ability, but we will see…

    Read the article

  • xterm not wrapping text properly

    - by mulllhausen
    I'm configuring both my gnome-terminal and xterm columns (i still haven't picked which of these I will be using) and I have a couple of issues I would like to fix: the typing area seems to be smaller (fewer columns) than the display area the typed text is not wrapping to the next line when it reaches the end - it just continues back around on the same line, overwriting the prompt (i have set a custom bash prompt with PS1 in case this is relevant) $ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.1 (wheezy) Release: 7.1 Codename: wheezy $ echo $TERM xterm $ stty -a [peter@pc ~] $ stty -a speed 38400 baud; rows 52; columns 126; line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = M-^?; eol2 = M-^?; swtch = M-^?; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 hupcl -cstopb cread -clocal -crtscts -ignbrk brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc ixany imaxbel iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke $[peter@mine ~] $ # the column width only goes up to here ------------------------------------------------> the results are identical in both the xterm and in gnome-terminal 3.4.1.1 and as you can see, the output of the stty -a command goes right up to the edge of the screen, while the typing does not go that far. I have found that I can get the desired result by setting the columns to a very large number, eg: $ stty cols 1800 this fixes both problems. Is it the right way to go about solving this problem? Will this "break" any of the output from programs? So far I have tried top and stty -a and these seem OK. more info as requested in the comments i found that if i cat some input into a file then the columns actually strech the full width of the terminal window: [peter@mine applications] $ cat > /tmp/asd aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaasssssssssssssssssssssssssssssssssssssssssssssssssssssssssssqqqqqqqqqqqqqqqq qqqq does this imply that it is actually bash that is restricting the number of columns and not the terminal? if so then how to alter the number of columns in bash?

    Read the article

  • Attention NYC Area Marketers: Don't Miss This Executive Breakfast on Brand Building in the Digital Era

    - by Christie Flanagan
    Presenting and Managing Digital Content – A New Approach Reach Your Audiences Where They Are with Multi-Channel Marketing Attention marketers in the greater New York City area! Oracle Platinum Partner, Bluenog, invites you to an executive breakfast seminar on brand building in the digital era. In an age where consumers are spending increasing amounts of their time online, interacting, communicating and being influenced by other brands, you too must go online with a coordinated plan. And, given the hundreds, if not thousands, of places that might be relevant, having the right content and the right tools are critical. This two-part presentation will focus on the growing need for content and connection in building and maintaining your brand, as well as the role of technology in helping you maintain brand consistency, reach and interaction while simplifying delivery to web, tablet, mobile, and social audiences. Location Oracle Offices 520 Madison Ave, 30th Floor New York, NY  10022 Day/Time Thursday, May 3, 2012 9:30 AM to 11:30 AM About the Speakers Agenda: Michelle Pujadas, is an award-winning marketer and communicator, who has worked with more than 125 companies to help them package, launch and expand their brand presence, online and off. Michelle is the Founder and co-CEO of Zer0 to 5ive, a strategic marketing and communications firm that focuses on B2B and B2C technology companies, with offices in NY, Philadelphia and Chicago. Peter Conrad, the E 2.0 Practice Director for Bluenog, focuses on translating exciting visions for user experiences into well executed technical implementations leveraging advanced WebCenter technology from Oracle. Bluenog provides the systems and professional services today's forward-looking marketing organizations need to convert content, business capabilities, and communications into productive interactions with customers and prospects. 09:30am Arrival, Registration & Breakfast 10:00am Brand Building through Content and Connection, presented by Michelle Pujadas, Founder and co-CEO of Zer0 to 5ive 10:30am Leveraging Technology for Brand Reach, Consistency and Interaction, presented by Peter Conrad, E2.0 Practice Director at Bluenog 11:15am Q&A 11:30am Adjourn

    Read the article

  • Oracle Developer Day OOP 2013 – become a Java expert & get a free ticket

    - by JuergenKress
    Want to become a Java Expert? Want to learn more about Java Roadmap, Java EE, Java FX, Java Cloud, ADF mobile, Rest and big data and try it hands-on? Make sure you attend the Oracle Developer Day 2013 with Adam Bien, Markus Eisele, Torsten Winterberg, Guido Schmut,  Wolfgang Weigend and Peter Doschkinow! Thursday January 24th 2013 Munich Conference Center Agenda 9.00-9.30:        Java Überblick und Roadmap – Wolfgang Weigend 9.30-10.00:       Java FX  – Peter Doschkinow 10.00-10.30:       ADF Mobile - Torsten Winterberg 10.30-11.00:       Pause 11.00-11.45:       Java EE – Adam Bien 11.45.12.15:       Java Cloud – Markus Eisele 12.15-12.45:       Java, big data & service bus & twitter– Guido Schmutz 12.45-14.30:       Mittag 14.30-16.30:       Hans-on workshops (parallel) Java FX Hands On ADF Mobile Glassfish Website with detail and Agenda Free registration for Exhibition and Oracle Developer Day For more information about Java please visit www.oracle.com/java WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. BlogTwitterLinkedInMixForumWiki Technorati Tags: OOP 2013,Oracle Developer Day,OOP Oracle,Adam Bien,Markus Eisele,Guido Schmutz,Torsten Winterberg,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • C# : When to go Fluent

    - by ach
    In many respects I really like the idea of Fluent interfaces, but with all of the modern features of C# (initializers, lambdas, named parameters) I find myself thinking, "is it worth it?", and "Is this the right pattern to use?". Could anyone give me, if not an accepted practice, at least their own experience or decision matrix for when to use the Fluent pattern? Conclusion: Some good rules of thumb from the answers so far: Fluent interfaces help greatly when you have more actions than setters, since calls benefit more from the context pass-through. Fluent interfaces should be thought of as a layer over top of an api, not the sole means of use. The modern features such as lambdas, initializers, and named parameters, can work hand-in-hand to make a fluent interface even more friendly. ... Edit: Here is an example of what I mean by the modern features making it feel less needed. Take for example a (perhaps poor example) Fluent interface that allows me to create an Employee like: Employees.CreateNew().WithFirstName("Peter") .WihtLastName("Gibbons") .WithManager() .WithFirstName("Bill") .WithLastName("Lumbergh") .WithTitle("Manager") .WithDepartment("Y2K"); Could easily be written with initiallizers like: Employees.Add(new Employee() { FirstName = "Peter", LastName = "Gibbons", Manager = new Employee() { FirstName = "Bill", LastName = "Lumbergh", Title = "Manager", Department = "Y2K" } }); I could also have used named parameters in a constructors in this example.

    Read the article

  • KERPOOOOW!

    - by Matt Christian
    Recently I discovered the colorful world of comic books.  In the past I've read comics a few times but never really got into them.  When I wanted to start a collection I decided either video games or comics yet stayed away from comics because I am less familiar with them. In any case, I stopped by my local comic shop and picked up a few comics and a few trade paperbacks.  After reading them and understanding their basic flow I began to enjoy not only the stories but the art styles hiding behind those little white bubbles of text (well, they're USUALLY white).  My first stop at the comic store I ended up with: - Nemesis #1 (cover A) - Shuddertown #1 (cover A I think) - Daredevil: King of Hell's Kitchen Trade Paperback - Peter Parker: Spiderman - One Small Break Trade Paperback It took me about 3-4 days to read all of that including re-reading the single issues and glancing over the beginning of Daredevil again.  After a week of looking around online I knew a little more about the comics I wanted to pick up and the kind of art style I enjoyed.  While Peter Parker: Spiderman was ok, I really enjoyed the detailed, realistic look of Daredevil and Shuddertown. Now, a few years back I picked up the game The Darkness for PS3.  I knew it was based off a comic but never read the comic.  I decided I'd pick up a few issues of it and ended up with: - The Darkness #80 (cover A) - The Darkness #81 (cover A) - The Darkness #82 (cover A) - The Darkness #83 (cover A) - The Darkness Shadows and Flame #1  (one-shot; cover A) - The Darkness Origins: Volume 1 Trade Paperback (contains The Darkness #1-6) - New Age boards and bags for storing my comics The Darkness is relatively good though jumping from issue #6 to issue #80 I lost a bit on who the enemy in the current series is.  I think out of all of them, issue #83 was my favorite of them. I'm signed up at the local shop to continue getting Nemesis, The Darkness, and Shuddertown, and I'll probably pick up a few different ones this weekend...

    Read the article

  • ArchBeat Link-o-Rama for 2012-10-09

    - by Bob Rhubart
    SOA Suite create partition in Enterprise Manager | Peter Paul van de Beek "In Oracle SOA Suite 10g, or more specific BPEL 10g, one could group functionality in domains," says Peter Paul van de Beek. "This feature has been away in the early versions of SOA Suite 11g. They have returned in more recent version and can be used for all SCA composites (instead of BPEL only). Nowadays these 10g domains are called partitions." OOW12: Oracle Business Process Management/Oracle ADF Integration Best Practices | Andrejus Baranovskis The Oracle OpenWorld presentations keep coming! Oracle ACE Director Andrejus Baranovskis shares the slides from "Oracle Business Process Management/Oracle ADF Integration Best Practices," co-presented with Danilo Schmiedel from Opitz Consulting. My presentations at Oracle Open World 2012 | Guido Schmutz The list of #OOW participants sharing their presentations grows with this post from Oracle ACE Director Guido Schmutz. You'll find Slideshare links to his presentations "Oracle Fusion Middleware Live Application Development (UGF10464)" and "Effective Fault handling in SOA Suite 11g (CON4832)." HTML Manifest for Content Folios | Kyle Hatlestad Kyle Hatlestad, solutions architect with the Oracle Fusion Middleware A-Team, shares the details on "a project to create a custom content folio renderer in WebCenter Content." Adaptive ADF/WebCenter template for the iPad | Maiko Rocha Oracle Fusion Middleware A-Team member Maiko Rocha responds to a a customer request for information about how to create an adaptive iPad template for their WebCenter Portal application, "a specific template to streamline their workflow on the iPad." Thought for the Day "I loved logic, math, computer programming. I loved systems and logic approaches. And so I just figured architecture is this perfect combination." — Maya Lin Source: Brainy Quote

    Read the article

  • SQL query. An unusual join. DB implemented in sqlite-3

    - by user02814
    This is essentially a question about constructing an SQL query. The db is implemented with sqlite3. I am a relatively new user of SQL. I have two tables and want to join them in an unusual way. The following is an example to explain the problem. Table 1 (t1): id year name ------------------------- 297 2010 Charles 298 2011 David 300 2010 Peter 301 2011 Richard Table 2 (t2) id year food --------------------------- 296 2009 Bananas 296 2011 Bananas 297 2009 Melon 297 2010 Coffee 297 2012 Cheese 298 2007 Sugar 298 2008 Cereal 298 2012 Chocolate 299 2000 Peas 300 2007 Barley 300 2011 Beans 300 2012 Chickpeas 301 2010 Watermelon I want to join the tables on id and year. The catch is that (1) id must match exactly, but if there is no exact match in Table 2 for the year in Table 1, then I want to choose the year that is the next (lower) available. A selection of the kind that I want to produce would give the following result id year matchyr name food ------------------------------------------------- 297 2010 2010 Charles Coffee 298 2011 2008 David Cereal 300 2010 2007 Peter Barley 301 2011 2010 Richard Watermelon To summarise, id=297 had an exact match for year=2010 given in Table 1, so the corresponding line for id=297, year=2010 is chosen from Table 2. id=298, year=2011 did not have a matching year in Table 2, so the next available year (less than 2011) is chosen. As you can see, I would also like to know what that matched year (whether exactly , or inexactly) actually was. I would very much appreciate (1) an indication (yes/no answer) of whether this is possible to do in SQL alone, or whether I need to look outside SQL, and (2) a solution, if that is not too onerous.

    Read the article

  • Oracle VM server for SPARC 2.2 on S11

    - by Liam Merwick
    Oracle VM Server for SPARC 2.2 has been released for a little while now. The https://blogs.oracle.com/virtualization blog has an overview of all the 2.2 features. Initially, what was released was the SVR4 package for Solaris 10 (which is unbundled and wasn't constrained by any external schedule). On Solaris 11, the 'ldomsmanager' package is built into Solaris (and therefore doesn't need to be downloaded separately) so it is delivered as part of an S11 Support Repository Update (SRU). Some of the features in 2.2 are specific to S11 (SR-IOV and the ability to live migrate between machines with different CPU types) and so there have been many requests to know when are the S11 bits coming. Solaris 11 SRU8.5 was released on Friday and this includes Oracle VM server for SPARC 2.2 so if you're already running an S11 SRU all you need do is a 'pkg update' to get the 2.2 bits. If you're still running the original S11 and your 'pkg publisher' output shows the /release repository then you'll need to sign up for the /support repo by getting the appropriate keys and certificates to access the repository (requires a support contract). The 2.2 Admin Guide documents how to do this upgrade on S11 Two S11 articles which have some useful details on upgrading (not just 'ldomsmanager') via the support repositories are: How to Update Oracle Solaris 11 Systems From Oracle Support Repositories by Glynn Foster Tips for Updating Your Oracle Solaris 11 System from the Oracle Support Repository by Peter Dennis In particular, if you'd like to stick with the v2.1 release when upgrading to SRU8.5 or greater, see the 'pkg freeze' section of Peter's article.

    Read the article

  • i am using winsock2.h in c language the following errors are unuderstandable help required?

    - by moon
    i am going to paste here my code an errors :::: #include "stdio.h" #include "winsock2.h" #define SIO_RCVALL _WSAIOW(IOC_VENDOR,1) //this removes the need of mstcpip.h void StartSniffing (SOCKET Sock); //This will sniff here and there void ProcessPacket (unsigned char* , int); //This will decide how to digest void PrintIpHeader (unsigned char* , int); void PrintUdpPacket (unsigned char* , int); void ConvertToHex (unsigned char* , unsigned int); void PrintData (unsigned char* , int); //IP Header Structure typedef struct ip_hdr { unsigned char ip_header_len:4; // 4-bit header length (in 32-bit words) normally=5 (Means 20 Bytes may be 24 also) unsigned char ip_version :4; // 4-bit IPv4 version unsigned char ip_tos; // IP type of service unsigned short ip_total_length; // Total length unsigned short ip_id; // Unique identifier unsigned char ip_frag_offset :5; // Fragment offset field unsigned char ip_more_fragment :1; unsigned char ip_dont_fragment :1; unsigned char ip_reserved_zero :1; unsigned char ip_frag_offset1; //fragment offset unsigned char ip_ttl; // Time to live unsigned char ip_protocol; // Protocol(TCP,UDP etc) unsigned short ip_checksum; // IP checksum unsigned int ip_srcaddr; // Source address unsigned int ip_destaddr; // Source address } IPV4_HDR; //UDP Header Structure typedef struct udp_hdr { unsigned short source_port; // Source port no. unsigned short dest_port; // Dest. port no. unsigned short udp_length; // Udp packet length unsigned short udp_checksum; // Udp checksum (optional) } UDP_HDR; //ICMP Header Structure typedef struct icmp_hdr { BYTE type; // ICMP Error type BYTE code; // Type sub code USHORT checksum; USHORT id; USHORT seq; } ICMP_HDR; FILE *logfile; int tcp=0,udp=0,icmp=0,others=0,igmp=0,total=0,i,j; struct sockaddr_in source,dest; char hex[2]; //Its free! IPV4_HDR *iphdr; UDP_HDR *udpheader; int main() { SOCKET sniffer; struct in_addr addr; int in; char hostname[100]; struct hostent *local; WSADATA wsa; //logfile=fopen("log.txt","w"); //if(logfile==NULL) printf("Unable to create file."); //Initialise Winsock printf("\nInitialising Winsock..."); if (WSAStartup(MAKEWORD(2,2), &wsa) != 0) { printf("WSAStartup() failed.\n"); return 1; } printf("Initialised"); //Create a RAW Socket printf("\nCreating RAW Socket..."); sniffer = socket(AF_INET, SOCK_RAW, IPPROTO_IP); if (sniffer == INVALID_SOCKET) { printf("Failed to create raw socket.\n"); return 1; } printf("Created."); //Retrive the local hostname if (gethostname(hostname, sizeof(hostname)) == SOCKET_ERROR) { printf("Error : %d",WSAGetLastError()); return 1; } printf("\nHost name : %s \n",hostname); //Retrive the available IPs of the local host local = gethostbyname(hostname); printf("\nAvailable Network Interfaces : \n"); if (local == NULL) { printf("Error : %d.\n",WSAGetLastError()); return 1; } for (i = 0; local->h_addr_list[i] != 0; ++i) { memcpy(&addr, local->h_addr_list[i], sizeof(struct in_addr)); printf("Interface Number : %d Address : %s\n",i,inet_ntoa(addr)); } printf("Enter the interface number you would like to sniff : "); scanf("%d",&in); memset(&dest, 0, sizeof(dest)); memcpy(&dest.sin_addr.s_addr,local->h_addr_list[in],sizeof(dest.sin_addr.s_addr)); dest.sin_family = AF_INET; dest.sin_port = 0; printf("\nBinding socket to local system and port 0 ..."); if (bind(sniffer,(struct sockaddr *)&dest,sizeof(dest)) == SOCKET_ERROR) { printf("bind(%s) failed.\n", inet_ntoa(addr)); return 1; } printf("Binding successful"); //Enable this socket with the power to sniff : SIO_RCVALL is the key Receive ALL ;) j=1; printf("\nSetting socket to sniff..."); if (WSAIoctl(sniffer, SIO_RCVALL,&j, sizeof(j), 0, 0,(LPDWORD)&in,0, 0) == SOCKET_ERROR) { printf("WSAIoctl() failed.\n"); return 1; } printf("Socket set."); //Begin printf("\nStarted Sniffing\n"); printf("Packet Capture Statistics...\n"); StartSniffing(sniffer); //Happy Sniffing //End closesocket(sniffer); WSACleanup(); return 0; } void StartSniffing(SOCKET sniffer) { unsigned char *Buffer = ( unsigned char *)malloc(65536); //Its Big! int mangobyte; if (Buffer == NULL) { printf("malloc() failed.\n"); return; } do { mangobyte = recvfrom(sniffer,(char *)Buffer,65536,0,0,0); //Eat as much as u can if(mangobyte > 0) ProcessPacket(Buffer, mangobyte); else printf( "recvfrom() failed.\n"); } while (mangobyte > 0); free(Buffer); } void ProcessPacket(unsigned char* Buffer, int Size) { iphdr = (IPV4_HDR *)Buffer; ++total; switch (iphdr->ip_protocol) //Check the Protocol and do accordingly... { case 1: //ICMP Protocol ++icmp; //PrintIcmpPacket(Buffer,Size); break; case 2: //IGMP Protocol ++igmp; break; case 6: //TCP Protocol ++tcp; //PrintTcpPacket(Buffer,Size); break; case 17: //UDP Protocol ++udp; PrintUdpPacket(Buffer,Size); break; default: //Some Other Protocol like ARP etc. ++others; break; } printf("TCP : %d UDP : %d ICMP : %d IGMP : %d Others : %d Total : %d\r",tcp,udp,icmp,igmp,others,total); } void PrintIpHeader (unsigned char* Buffer, int Size) { unsigned short iphdrlen; iphdr = (IPV4_HDR *)Buffer; iphdrlen = iphdr->ip_header_len*4; memset(&source, 0, sizeof(source)); source.sin_addr.s_addr = iphdr->ip_srcaddr; memset(&dest, 0, sizeof(dest)); dest.sin_addr.s_addr = iphdr->ip_destaddr; fprintf(logfile,"\n"); fprintf(logfile,"IP Header\n"); fprintf(logfile," |-IP Version : %d\n",(unsigned int)iphdr->ip_version); fprintf(logfile," |-IP Header Length : %d DWORDS or %d Bytes\n",(unsigned int)iphdr->ip_header_len); fprintf(logfile," |-Type Of Service : %d\n",(unsigned int)iphdr->ip_tos); fprintf(logfile," |-IP Total Length : %d Bytes(Size of Packet)\n",ntohs(iphdr->ip_total_length)); fprintf(logfile," |-Identification : %d\n",ntohs(iphdr->ip_id)); fprintf(logfile," |-Reserved ZERO Field : %d\n",(unsigned int)iphdr->ip_reserved_zero); fprintf(logfile," |-Dont Fragment Field : %d\n",(unsigned int)iphdr->ip_dont_fragment); fprintf(logfile," |-More Fragment Field : %d\n",(unsigned int)iphdr->ip_more_fragment); fprintf(logfile," |-TTL : %d\n",(unsigned int)iphdr->ip_ttl); fprintf(logfile," |-Protocol : %d\n",(unsigned int)iphdr->ip_protocol); fprintf(logfile," |-Checksum : %d\n",ntohs(iphdr->ip_checksum)); fprintf(logfile," |-Source IP : %s\n",inet_ntoa(source.sin_addr)); fprintf(logfile," |-Destination IP : %s\n",inet_ntoa(dest.sin_addr)); } void PrintUdpPacket(unsigned char *Buffer,int Size) { unsigned short iphdrlen; iphdr = (IPV4_HDR *)Buffer; iphdrlen = iphdr->ip_header_len*4; udpheader = (UDP_HDR *)(Buffer + iphdrlen); fprintf(logfile,"\n\n***********************UDP Packet*************************\n"); PrintIpHeader(Buffer,Size); fprintf(logfile,"\nUDP Header\n"); fprintf(logfile," |-Source Port : %d\n",ntohs(udpheader->source_port)); fprintf(logfile," |-Destination Port : %d\n",ntohs(udpheader->dest_port)); fprintf(logfile," |-UDP Length : %d\n",ntohs(udpheader->udp_length)); fprintf(logfile," |-UDP Checksum : %d\n",ntohs(udpheader->udp_checksum)); fprintf(logfile,"\n"); fprintf(logfile,"IP Header\n"); PrintData(Buffer,iphdrlen); fprintf(logfile,"UDP Header\n"); PrintData(Buffer+iphdrlen,sizeof(UDP_HDR)); fprintf(logfile,"Data Payload\n"); PrintData(Buffer+iphdrlen+sizeof(UDP_HDR) ,(Size - sizeof(UDP_HDR) - iphdr->ip_header_len*4)); fprintf(logfile,"\n###########################################################"); } void PrintData (unsigned char* data , int Size) { for(i=0 ; i < Size ; i++) { if( i!=0 && i%16==0) //if one line of hex printing is complete... { fprintf(logfile," "); for(j=i-16 ; j<i ; j++) { if(data[j]>=32 && data[j]<=128) fprintf(logfile,"%c",(unsigned char)data[j]); //if its a number or alphabet else fprintf(logfile,"."); //otherwise print a dot } fprintf(logfile,"\n"); } if(i%16==0) fprintf(logfile," "); fprintf(logfile," %02X",(unsigned int)data[i]); if( i==Size-1) //print the last spaces { for(j=0;j<15-i%16;j++) fprintf(logfile," "); //extra spaces fprintf(logfile," "); for(j=i-i%16 ; j<=i ; j++) { if(data[j]>=32 && data[j]<=128) fprintf(logfile,"%c",(unsigned char)data[j]); else fprintf(logfile,"."); } fprintf(logfile,"\n"); } } } following are the errors Error 1 error LNK2019: unresolved external symbol __imp__WSACleanup@0 referenced in function _main sniffer.obj sniffer test Error 2 error LNK2019: unresolved external symbol __imp__closesocket@4 referenced in function _main sniffer.obj sniffer test Error 3 error LNK2019: unresolved external symbol __imp__WSAIoctl@36 referenced in function _main sniffer.obj sniffer test Error 4 error LNK2019: unresolved external symbol __imp__bind@12 referenced in function _main sniffer.obj sniffer test Error 5 error LNK2019: unresolved external symbol __imp__inet_ntoa@4 referenced in function _main sniffer.obj sniffer test Error 6 error LNK2019: unresolved external symbol __imp__gethostbyname@4 referenced in function _main sniffer.obj sniffer test Error 7 error LNK2019: unresolved external symbol __imp__WSAGetLastError@0 referenced in function _main sniffer.obj sniffer test Error 8 error LNK2019: unresolved external symbol __imp__gethostname@8 referenced in function _main sniffer.obj sniffer test Error 9 error LNK2019: unresolved external symbol __imp__socket@12 referenced in function _main sniffer.obj sniffer test Error 10 error LNK2019: unresolved external symbol __imp__WSAStartup@8 referenced in function _main sniffer.obj sniffer test Error 11 error LNK2019: unresolved external symbol __imp__recvfrom@24 referenced in function "void __cdecl StartSniffing(unsigned int)" (?StartSniffing@@YAXI@Z) sniffer.obj sniffer test Error 12 error LNK2019: unresolved external symbol __imp__ntohs@4 referenced in function "void __cdecl PrintIpHeader(unsigned char *,int)" (?PrintIpHeader@@YAXPAEH@Z) sniffer.obj sniffer test Error 13 fatal error LNK1120: 12 unresolved externals E:\CWM\sniffer test\Debug\sniffer test.exe sniffer test

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • Bit shift and pointer oddities in C, looking for explanations

    - by foo
    Hi all, I discovered something odd that I can't explain. If someone here can see what or why this is happening I'd like to know. What I'm doing is taking an unsigned short containing 12 bits aligned high like this: 1111 1111 1111 0000 I then want to shif the bits so that each byte in the short hold 7bits with the MSB as a pad. The result on what's presented above should look like this: 0111 1111 0111 1100 What I have done is this: unsigned short buf = 0xfff; //align high buf <<= 4; buf >>= 1; *((char*)&buf) >>= 1; This gives me something like looks like it's correct but the result of the last shift leaves the bit set like this: 0111 1111 1111 1100 Very odd. If I use an unsigned char as a temporary storage and shift that then it works, like this: unsigned short buf = 0xfff; buf <<= 4; buf >>= 1; tmp = *((char*)&buf); *((char*)&buf) = tmp >> 1; The result of this is: 0111 1111 0111 1100 Any ideas what is going on here?

    Read the article

  • 32 bit dllimport generating incorrect format error (0x8007000b) on win7 x64 platform

    - by DFP
    Hello, I'm trying to install and run a 32 bit application on a Win7 x64 machine. The application is built as a Win32 app. It runs fine on 32 bit platforms. On the x64 machine it installs correctly in the Programs(x86) directory and runs fine until I make a call into a 32 bit dll. At that time I get the incorrect format error (0x8007000b) indicating it is trying to load the dll of the wrong bitness. Indeed it is trying to load the 64 bit dll from the System32 directory rather than the 32 bit version in the SystemWOW64 directory. Another 32 bit application provided by the dll vendor runs correctly and it does load the 32 bit dll from the SystemWOW64 directory. I do not have source to their application to see how they are accessing the DLL. I'm using the DllImport function as shown below to access the dll. Is there a way to decorate the DllImport calls to force it to load the 32 bit version? Any thoughts appreciated. Thanks, DP public static class Micronas { [DllImport(@"UAC2.DLL")] public static extern short UacBuildDeviceList(uint uFlags); [DllImport(@"UAC2.DLL")] public static extern short UacGetNumberOfDevices(); [DllImport(@"UAC2.DLL")] public static extern uint UacGetFirstDevice(); [DllImport(@"UAC2.DLL")] public static extern uint UacGetNextDevice(uint handle); [DllImport(@"UAC2.DLL")] public static extern uint UacSetXDFP(uint handle, short adr, uint data); [DllImport(@"UAC2.DLL")] public unsafe static extern uint UacGetXDFP(uint handle, short adr, IntPtr data); }

    Read the article

  • Java performance issue

    - by Colby77
    Hi, I've got a question related to java performance and method execution. In my app there are a lot of place where I have to validate some parameter, so I've written a Validator class and put all the validation methods into it. Here is an example: public class NumberValidator { public static short shortValidator(String s) throws ValidationException{ try{ short sh = Short.parseShort(s); if(sh < 1){ throw new ValidationException(); } return sh; }catch (Exception e) { throw new ValidationException("The parameter is wrong!"); } } ... But I'm thinking about that. Is this OK? It's OO and modularized, but - considering performance - is it a good idea? What if I had awful lot of invocation at the same time? The snippet above is short and fast, but there are some methods that take more time. What happens when there are a lot of calling to a static method or an instance method in the same class and the method is not synchronized? All the calling methods have to fall in line and the JVM executes them sequentially? Is it a good idea to have some class that are identical to the above-mentioned and randomly call their identical methods? I think it is not, because "Don't repeat yourself " and "Duplication is Evil" etc. But what about performance? Thanks is advance.

    Read the article

  • How to use a int2 database-field as a boolean in Java using JPA/Hibernate

    - by mg
    Hello... I write an application based on an already existing database (postgreSQL) using JPA and Hibernate. There is a int2-column (activeYN) in a table, which is used as a boolean (0 = false (inactive), not 0 = true (active)). In the Java application i want to use this attribute as a boolean. So i defined the attribute like this: @Entity public class ModelClass implements Serializable { /*..... some Code .... */ private boolean active; @Column(name="activeYN") public boolean isActive() { return this.active; } /* .... some other Code ... */ } But there ist an exception because Hibernate expects an boolean database-field and not an int2. Can i do this mapping i any way while using a boolean in java?? I have a possible solution for this, but i don't really like it: My "hacky"-solution is the following: @Entity public class ModelClass implements Serializable { /*..... some Code .... */ private short active_USED_BY_JPA; //short because i need int2 /** * @Deprecated this method is only used by JPA. Use the method isActive() */ @Column(name="activeYN") public short getActive_USED_BY_JPA() { return this.active_USED_BY_JPA; } /** * @Deprecated this method is only used by JPA. * Use the method setActive(boolean active) */ public void setActive_USED_BY_JPA(short active) { this.active_USED_BY_JPA = active; } @Transient //jpa will ignore transient marked methods public boolean isActive() { return getActive_USED_BY_JPA() != 0; } @Transient public void setActive(boolean active) { this.setActive_USED_BY_JPA = active ? -1 : 0; } /* .... some other Code ... */ } Are there any other solutions for this problem? The "hibernate.hbm2ddl.auto"-value in the hibernate configuration is set to "validate". (sorry, my english is not the best, i hope you understand it anyway)..

    Read the article

  • Unboxing to unknown type

    - by Robert
    I'm trying to figure out syntax that supports unboxing an integral type (short/int/long) to its intrinsic type, when the type itself is unknown. Here is a completely contrived example that demonstrates the concept: // Just a simple container that returns values as objects struct DataStruct { public short ShortVale; public int IntValue; public long LongValue; public object GetBoxedShortValue() { return LongValue; } public object GetBoxedIntValue() { return LongValue; } public object GetBoxedLongValue() { return LongValue; } } static void Main( string[] args ) { DataStruct data; // Initialize data - any value will do data.LongValue = data.IntValue = data.ShortVale = 42; DataStruct newData; // This works if you know the type you are expecting! newData.ShortVale = (short)data.GetBoxedShortValue(); newData.IntValue = (int)data.GetBoxedIntValue(); newData.LongValue = (long)data.GetBoxedLongValue(); // But what about when you don't know? newData.ShortVale = data.GetBoxedShortValue(); // error newData.IntValue = data.GetBoxedIntValue(); // error newData.LongValue = data.GetBoxedLongValue(); // error } In each case, the integral types are consistent, so there should be some form of syntax that says "the object contains a simple type of X, return that as X (even though I don't know what X is)". Because the objects ultimately come from the same source, there really can't be a mismatch (short != long). I apologize for the contrived example, it seemed like the best way to demonstrate the syntax. Thanks.

    Read the article

  • activemessaging with stomp and activemq.prefetchSize=1

    - by Clint Miller
    I have a situation where I have a single activemq broker with 2 queues, Q1 and Q2. I have two ruby-based consumers using activemessaging. Let's call them C1 and C2. Both consumers subscribe to each queue. I'm setting activemq.prefetchSize=1 when subscribing to each queue. I'm also setting ack=client. Consider the following sequence of events: 1) A message that triggers a long-running job is published to queue Q1. Call this M1. 2) M1 is dispatched to consumer C1, kicking off a long operation. 3) Two messages that trigger short jobs are published to queue Q2. Call these M2 and M3. 4) M2 is dispatched to C2 which quickly runs the short job. 5) M3 is dispatched to C1, even though C1 is still running M1. It's able to dispatch to C1 because prefetchSize=1 is set on the queue subscription, not on the connection. So the fact that a Q1 message has already been dispatched doesn't stop one Q2 message from being dispatched. Since activemessaging consumers are single-threaded, the net result is that M3 sits and waits on C1 for a long time until C1 finishes processing M1. So, M3 is not processed for a long time, despite the fact that consumer C2 is sitting idle (since it quickly finishes with message M2). Essentially, whenever a long Q1 job is run and then a whole bunch of short Q2 jobs are created, exactly one of the short Q2 jobs gets stuck on a consumer waiting for the long Q1 job to finish. Is there a way to set prefetchSize at the connection level rather than at the subscription level? I really don't want any messages dispatched to C1 while it is processing M1. The other alternative is that I could create a consumer dedicated to processing Q1 and then have other consumers dedicated to processing Q2. But, I'd rather not do that since Q1 messages are infrequent--Q1's dedicated consumers would sit idle most of the day tying up memory.

    Read the article

  • Performance: float to int cast and clipping result to range

    - by durandai
    I'm doing some audio processing with float. The result needs to be converted back to PCM samples, and I noticed that the cast from float to int is surprisingly expensive. Whats furthermore frustrating that I need to clip the result to the range of a short (-32768 to 32767). While I would normally instictively assume that this could be assured by simply casting float to short, this fails miserably in Java, since on the bytecode level it results in F2I followed by I2S. So instead of a simple: int sample = (short) flotVal; I needed to resort to this ugly sequence: int sample = (int) floatVal; if (sample > 32767) { sample = 32767; } else if (sample < -32768) { sample = -32768; } Is there a faster way to do this? (about ~6% of the total runtime seems to be spent on casting, while 6% seem to be not that much at first glance, its astounding when I consider that the processing part involves a good chunk of matrix multiplications and IDCT) EDIT The cast/clipping code above is (not surprisingly) in the body of a loop that reads float values from a float[] and puts them into a byte[]. I have a test suite that measures total runtime on several test cases (processing about 200MB of raw audio data). The 6% were concluded from the runtime difference when the cast assignment "int sample = (int) floatVal" was replaced by assigning the loop index to sample. EDIT @leopoldkot: I'm aware of the truncation in Java, as stated in the original question (F2I, I2S bytecode sequence). I only tried the cast to short because I assumed that Java had an F2S bytecode, which it unfortunately does not (comming originally from an 68K assembly background, where a simple "fmove.w FP0, D0" would have done exactly what I wanted).

    Read the article

  • Formating Date in Freemarker to say "Today", "Yesterday", etc.

    - by egervari
    Is there a way in freemarker to compare dates to test if the date is today or yesterday... or do I have to write code in Java to do these tests? I basically want to do this: <#------------------------------------------------------------------------------ formatDate -------------------------------------------------------------------------------> <#macro formatDate date showTime=true> <#if date??> <span class="Date"> <#if date?is_today> Today <#elseif date?is_yesterday> Yesterday <#else> ${date?date} </#if> </span> <#if showTime> <span class="Time">${date?time}</span> </#if> </#if> </#macro> EDIT: My best guess to implement this is to pass "today" and "yesterday" into the model for the pages that use this function and then compare the date values against these 2 objects in the model. I am out of out of options, but I'd rather not have to do this for every page that uses this macro. Any other options that are nicer? <#if date??> <span class="Date"> <#if date?date?string.short == today?date?string.short> Today <#elseif date?date?string.short == yesterday?date?string.short> Yesterday <#else> ${date?date} </#if> </span> <#if showTime> <span class="Time">${date?time}</span> </#if> </#if>

    Read the article

  • Building "isolated" and "automatically updated" caches (java.util.List) in Java.

    - by Aidos
    Hi Guys, I am trying to write a framework which contains a lot of short-lived caches created from a long-living cache. These short-lived caches need to be able to return their entier contents, which is a clone from the original long-living cache. Effectively what I am trying to build is a level of transaction isolation for the short-lived caches. The user should be able to modify the contents of the short-lived cache, but changes to the long-living cache should not be propogated through (there is also a case where the changes should be pushed through, depending on the Cache type). I will do my best to try and explain: master-cache contains: [A,B,C,D,E,F] temporary-cache created with state [A,B,C,D,E,F] 1) temporary-cache adds item G: [A,B,C,D,E,F] 2) temporary-cache removes item B: [A,C,D,E,F] master-cache contains: [A,B,C,D,E,F] 3) master-cache adds items [X,Y,Z]: [A,B,C,D,E,F,X,Y,Z] temporary-cache contains: [A,C,D,E,F] Things get even harder when the values in the items can change and shouldn't always be updated (so I can't even share the underlying object instances, I need to use clones). I have implemented the simple approach of just creating a new instance of the List using the standard Collection constructor on ArrayList, however when you get out to about 200,000 items the system just runs out of memory. I know the value of 200,000 is excessive to iterate, but I am trying to stress my code a bit. I had thought that it might be able to somehow "proxy" the list, so the temporary-cache uses the master-cache, and stores all of it's changes (effectively a Memento for the change), however that quickly becomes a nightmare when you want to iterate the temporary-cache, or retrieve an item at a specific index. Also given that I want some modifications to the contents of the list to come through (depending on the type of the temporary-cache, whether it is "auto-update" or not) and I get completly out of my depth. Any pointers to techniques or data-structures or just general concepts to try and research will be greatly appreciated. Cheers, Aidos

    Read the article

  • I'm having an issue to use GLshort for representing Vertex, and Normal.

    - by Xylopia
    As my project gets close to optimization stage, I notice that reducing Vertex Metadata could vastly improve the performance of 3D rendering. Eventually, I've dearly searched around and have found following advices from stackoverflow. Using GL_SHORT instead of GL_FLOAT in an OpenGL ES vertex array How do you represent a normal or texture coordinate using GLshorts? Advice on speeding up OpenGL ES 1.1 on the iPhone Simple experiments show that switching from "FLOAT" to "SHORT" for vertex and normal isn't tough, but what troubles me is when you're to scale back verticies to their original size (with glScalef), normals are multiplied by the reciprocal of the scale. Natural remedy for this is to multiply the normals w/ scale before you submit to GPU. Then, my short normals almost become 0, because the scale factor is usually smaller than 0. Duh! How do you use "short" for both vertex and normal at the same time? I've been trying this and that for about a full day, but I could only go for "float vertex w/ byte normal" or "short vertex w/ float normal" so far. Your help would be truly appreciated.

    Read the article

  • byte + byte = int... why?

    - by Robert C. Cartaino
    Looking at this C# code... byte x = 1; byte y = 2; byte z = x + y; // ERROR: Cannot implicitly convert type 'int' to 'byte' The result of any math performed on byte (or short) types is implicitly cast back to an integer. The solution is to explicitly cast the result back to a byte, so... byte z = (byte)(x + y); // works What I am wondering is why? Is it architectural? Philosophical? We have: int + int = int long + long = long float + float = float double + double = double So why not: byte + byte = byte short + short = short ? A bit of background: I am performing a long list of calculations on "small numbers" (i.e. < 8) and storing the intermediate results in a large array. Using a byte array (instead of an int array) is faster (because of cache hits). But the extensive byte-casts spread through the code make it that much more unreadable.

    Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >