Search Results

Search found 12899 results on 516 pages for 'usb boot'.

Page 29/516 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• Why does USB thumb drive screw up boot sequence?

  - by Carl B

  I am looking for understanding to a boot issue. I have at times had some files and such that I save and retrieve from my thumb drive. I use the front panel as it is nice and easy to get to and I typically power down my system nightly. If I forget to pull the drive and power on the system, it becomes the first bootable device. As there is no OS on the USB Drive I get the BOOTMGR is missing press CTRL+ALT+DELETE. When I go into BIOS to see Boot sequence, there’s the thumb drive up top, DVD drive is missing and not found in the list of devices. All of the hard drives are next in line. When I pull the USB drive, and reboot, everything is back to normal. Old boot sequence is in place, DVD drive right where it should be and no issues. So why does this happen with a USB drive in port at boot up? If it can’t be booted from, shouldn’t the next drive be attempted? Note: This happens when the thumb drive is plugged into a USB port on the front panel. It does not seem to happen on rear panel ports.

  Read the article

• Xubuntu 12.04 : Random boot to black screen

  - by Thibaud Ruelle

  My xubuntu 12.04 has worked flawlessly since install in September. However, lately I randomly have the following boot issue : The computer boots to grub, and after choosing xubuntu either boots normally or boots to a black screen. Here are some observations I have made : The black screen seems to happen randomly. The black screen does not seem to happen in safe mode (- nomodeset in grub). The black screen does not allow me to ctrl + alt + F1-6 into a terminal. The black screen allows me to use SysRq keys (Alt + SysRq + K does not work though). The black screen often happens on first boot in several hours and the computer usually boots normally after a RSEINUB. When the computer boots I get "SP5100 TCO timer: mmio address 0xfec000f0 already in use" at startup and "Could not write bytes: broken pipe" at shutdown. However research on these errors did not yield answers to my particular issue. Comparing Xorg.0.log (successful boot) and Xorg.0.log.old (black screen), and reading the answers to similar problem, it seems that I might have a X driver issue. However the system worked flawlessly since lately. Additional info on my system : ACER AO722 C62kk Operating system : 3.2.0-31-generic ubuntu Edit : I made a fresh install of Xubuntu 12.04 x64, the issue is still there ... (I have a separate /home so config. files were not erased). Edit 2 : I followed troubleshooting blank screen, so my new observations are without quiet and splash in grub : When the system boots normally, the screen goes black after grub then lights up and displays text information then goes to login screen. (After that the desktop starting time vary substantially, which is new and may be a separate issue ?). When the boot fails, after grub the screen goes black, lights up, goes black, lights up again and most times goes black again. At this point it responds to Alt+SysReq K by lighting up but no more, and has to be rebooted through Alt+SysReq+ RSEINUB. Thank you for your time and attention in advance ! Thibaud Ruelle

  Read the article

• Grub bootloader goes fail to boot in dual boot system after installing Ubuntu 12.10

  - by K.K Patel

  I had 12.04 with my dual boot system. Yesterday I downloaded Ubuntu 12.10 make bootable USB and choose Upgrade option in Installer. After installation Grub failed to boot my machine. I tried following to fix grub bootloder . Same problem I fixed with Ubuntu 12.04 using live USB but this solution not work for Ubuntu 12.10. Now coming at exactly where this solution goes fail. I followed this steps after booting Live USB and opening terminal. 1) sudo fdisk -l to see where Linux is installed 2) sudo mount /dev/sda9 /mnt where sda9 is my linux partition 3) sudo mount /dev/sda9 /mnt/boot 4) sudo mount --bind /dev /mnt/dev 5) sudo chroot /mnt (No problems with this steps done perfectly) 6) grub-install /dev/sda when I type command I got error that source_dir doesn't exist Please specify --target or --directory How can I solve this ?

  Read the article

• 12.04 - How do I Fix Grub Error 15 on New Dual Boot Install

  - by Garth

  I just installed 12.04 to Dual Boot (separate partitions) with an existing Win 7. Upon reboot after install things freeze after Grub 1.5 with a Grub Error 15 message. Is there any easy way to fix this? (I am posting this from my second computer) UPDATE: I managed to boot into both 12.04 and Win7 using BIOS: Selected the disk with the Win7 'C' Partition: resulted in the same error message Rebooted, tried the disk with the Ubuntu Partitions: *Grub Menu loaded: Managed to boot 12.04, rebooted, used BIOS again: Managed to boot Win 7 So, I have access to my computer again (thru BIOS), but this has been a pretty crappy install experience. Garth I used the the Final release 12.04 Ubuntu install disk, reformatted all Linux partitions, and expected a simple clean install. Other than specifying the Ubuntu Partitions, I did a basic install of 12.04. No way I did do anything to get this crap error failure! I have no idea why my install resulted in a Grub-15 error. CLOSED - Answered my own Question: I burned a RescuTux Disk and used it to recover grub2 (simplest and easiest way for me. http://www.supergrubdisk.org/category/download/rescatuxdownloads/ Garth

  Read the article

• How to get a Toshiba L505 to boot USB or CD

  - by ShroudedCloud

  OK, have a Toshiba L505 (not sure of the extended model number) that got a virus on Windows and will no longer will boot into that, so I'm trying to revive it with Ubuntu. Problem is, when I tell it to boot into a USB image of 12.04 32- or 64-bit, 13.04 64-bit, or elementary Luna 32-bit, it gives me some screen with a copyright from 2000 for Intel, invariably spits out a "media not recognized" type of error and then says PXE-ROM exiting. Well, that's annoying. So I went in with a CD (12.04 x86_64 having tried 32-bit in the past as well). Boot menu, select, starts running. Seeing the loading screen for Ubuntu, going well... until it's not. Again, invariably, it fails. The CD drive will cease spinning at around the same time each time and then the laptop will stop doing everything altogether (at least, everything spins down and it goes quiet). As far as I can tell, it's not to do with what function is being loaded from the CD at the time (because that bit is variable). I'd love to be able to boot from USB (since it will be all but required going forward), but getting the CD to work would be wondrous too. Anyone have any ideas of where I can go from here to try to fix this? My friends and I have turned up nothing.

  Read the article

• Dealing with three Windows partitions in dual boot installation

  - by Tim

  For dual-boot installation of Ubuntu after Windows. Quoted from ubuntuguide If a Windows boot partition exists as a second NTFS partition, it should be left alone. If there is a Windows recovery partition also installed, it can also be left alone as long as there are only two NTFS partitions total on the hard drive (i.e. there is no NTFS boot partition as well). If there are a total of 3 NTFS partitions on the hard drive, then the third Windows NTFS partition (the recovery partition) should be removed after creating Recovery CDs from it (see here). In the last case where Windows has three partitions, I was wondering why it says the recovery partition shall be removed? Is it possible to keep the three and create another extended partition with several logical partitions for installing Ubuntu and dual-booting the two OSes? I plan to dual-boot install Ubuntu 10.04 with existing Windows 7. Following is the layout of the current partitions of my hard drive viewed from Windows 7: So must I remove the Lenovo_Recovery (Q:) partition for the same reason you give for the first question? Thanks and regards!

  Read the article

• Ubuntu 12.04 slow boot on ASUS, attached with dmesg and bootchart

  - by stanleyhunk

  I heard that Ubuntu can boot up around 30sec, but I take more than 60sec every time my Ubuntu boot. I also read some forum said need to post the dmesg and bootchart to identify which process slowing down the booting time, as I'm not expert in Ubuntu and wish to learn more about it, I humbly ask any pro here to teach me how. My laptop specs: Model : ASUS K45VS RAM : 8MB CPU : Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz x 8 Graphic Card : nVidia GeForce GT 645M HDD : 750GB OS : Single boot Ubuntu 12.04LTS System.uname : Linux 3.8.0-39-generic #58~precise1-Ubuntu SMP Fri May 2 21:33:40 UTC 2014 x86_64 System.release : Ubuntu 12.04.4 LTS System.kernel.options : BOOT_IMAGE=/boot/vmlinuz-3.8.0-39-generic root=UUID=c8a71503-bce8-406c-9a5f-5aa8284f5c7c ro quiet splash My dmesg (which highlighted to the huge time frame gap): [ 30.772656] cgroup: libvirtd (1961) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 30.772659] cgroup: "memory" requires setting use_hierarchy to 1 on the root. [ 30.772683] cgroup: libvirtd (1961) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 30.772710] cgroup: libvirtd (1961) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 32.140335] nvidia 0000:01:00.0: irq 46 for MSI/MSI-X [ 32.505619] ACPI Error: Field [TMPB] at 1081344 exceeds Buffer [ROM1] size 262144 (bits) (20121018/dsopcode-236) [ 32.505624] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP._ROM] (Node ffff880224e91f00), AE_AML_BUFFER_LIMIT (20121018/psparse-537) [ 802.034422] audit_printk_skb: 69 callbacks suppressed [ 802.034428] type=1400 audit(1400914804.392:35): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1683 comm="cupsd" pid=1683 comm="cupsd" capability=36 capname="block_suspend" [ 1581.300901] type=1400 audit(1400915584.816:36): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1683 comm="cupsd" pid=1683 comm="cupsd" capability=36 capname="block_suspend" My Bootchart.png: Looking forward to learn to improve both my booting time and knowledge. Thanks in advance :)

  Read the article

• Troubles Installing Windows 7 via USB. Flat install?

  - by Brian

  Hi friends, I've been struggling with this for a while. Windows 7 64-bit Enterprise edition just will not install on my Shuttle K45 system via a USB key. It hangs out during the install while copying files or while creating the partitions. The system is pretty standard and low-tech: IDE hard drives, no CD, 2G RAM. I am not sure what of the problem. Other than the Shuttle, I have a Apple MacBook Pro. On the MPB, I am running OS X, and Mint Linux and Window XP over Parallels. I have an ISO of Win7 that works (I installed it as a Parallels VM to make sure). I have used UltraISO and MS Windows 7 USB/DVD Download Tool to write it to the 8G USB key. Both seem to copy all the files correctly (with UltraISO, I asked it to verify). It boots via USB and the install looks just fine. Until it hangs, most of the time with a copying error of 0x80070241. So now I am trying to figure out if there are other ways I can install Windows 7 on this Shuttle system that has no CD drive. I've heard about a flat installation, however those all seem to be doing something from within Windows. I do have access to a command prompt from the Windows 7 install. Does anyone know if/how I can prep the Shuttle hard drive with Windows 7 installation and have Windows 7 install from the hard disk. I do not have an external enclosure for the IDE HD and I do not have any other system I can hook up to the hard drives. I do have an external Maxtor OneTouch drive available.

  Read the article

• Ubuntu 12.04 takes too long to boot

  - by msPeachy

  I've recently encountered the following error message: mount: mounting /dev/disk/by-uuid/3f7f5cd9d-6ea3-4da7-b5ec-**** on /root failed: Invalid argument mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target file system doesn't have /sbin/init. No init found. Try passing init= bootarg. Busybox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) _ I run sudo fsck /dev/sda2 which is the Ubuntu ext4 root partition via LiveCD. It checked and fixed the file system. The next time I boot, Ubuntu started to load with the Ubuntu logo and the dots underneath for several hours (with the mouse pointer active on the screen), I even let the computer on overnight but still it did not successfully boot or got to the login screen in the morning. I booted again with the LiveCD and checked the NTFS partitions with ntfsfix and again the NTFS partitions was checked and fixed successfully. I also edited my fstab and commented out the lines that auto-mounts the NTFS partitions. The next time I boot, it took almost 20 minutes for Ubuntu to get to the login screen, after typing the password it took an additional 10 minutes for Ubuntu to get to the desktop. On the desktop, it take several minutes to open any program, displaying the Dash alone takes 5 minutes! Is there a fix for this without having to reinstall Ubuntu? I don't see or get any errors, Ubuntu is just taking too long to boot and to run programs. Please help!

  Read the article

• Error on /home prevents OS boot

  - by mdrg

  Ok, I'll try to explain it listing the events: motherboard battery is weak, loses config everytime I shut the PC down; system clock usually back to 1990-something; this time, it went up to 2148; ubuntu became somewhat unusable (firefox refusing certificates, dropbox blocked), so I restarted; manually set the clock to current date and restarted; during boot, ubuntu detects errors and start auto-fix, rebooting itself in the middle of it (like a hard reboot, no shutdown messages) next time, shows boot animation screen in text mode, with an error message after a while: "Errors were found while checking the disk drive or /home", with "attempt to fix, ignore, skip mounting or manual recovery" None of the options during the boot work, they just type the text to the screen, then I'm forced to physically restart. Now I'm using Mint LXDE live CD, and I can see all my partitions just fine, including /home (my home folder blocked due to encryption, the other user folder is accessible and everything in place). I'm not sure how to proceed now. I'd like to just fix ubuntu boot without reinstalling or anything like it (at least until 12.04). What should I do now? can I easily fix this somewhow? Thanks!

  Read the article

• USB 3.0 ports backwards compatibility problems with 2.0 devices?

  - by AaronLS

  I see some info on the net that suggest that I should be able to get my USB 2.0 devices to work in 3.0 ports. I only have two 2.0 ports on my new computer, and six 3.0 ports. I have installed drives. There's two different drivers, I guess some of the ports are supported by the intel board and some supported by some other chipset on the motherboard. I however have yet to get any of the 3.0 ports to work, and my brother had had the same issue with his devices not working in 3.0 ports on his computer. So I am beginning to wonder if the backwards compatibility isn't reliable for some reason. Maybe manufacturers opting not to implement 2.0 support on the 3.0 ports. I understand that physically the wiring is there, but that is only half the story. Beyond my brother's and my own computers (different motherboards/everything), I have yet to see a 2.0 device work in a 3.0 port. Is there any reason for this apparent device incompatibility? I.e. looking for responses that would indicate what areas to explore for issues or if there is any known cases of manufacturers deviating from spec in hardware or drivers. I am aware it's "supposed" to work :) Update: Does this have any relation to "USB Legacy Support" options in the BIOS? There several options combinations of options with "USB Legacy Support" and "USB 3.0 Legacy Support" and the description for these is a bit confusing, sounds like a bad translation.

  Read the article

• after upgrade from 10.04 to 12.04 cannot boot with linux 3.2.0-24-generic-pae

  - by Ricardo

  After upgrade from 10.04 to 12.04, I cannot boot with linux 3.2.0-24-generic-pae: process gets frozen in a xubuntu initialization screen (I had qimo installed). If I try the recovery mode (with the same Linux version), booting freezes after this message: Begin: Mounting root file system. If in grub menu I choose Previous Linux versions, I can boot using Linux 2.6.32-41-generic-pae. But once logged in, some things don't seem to work (apt-get update fails, update manager fails, HID menu does not provide suggestions...) (to be honest, I have no idea whether this is part of the bigger issue) Reading in Ask Ubuntu through apparently similar problems, I decided to follow some advices: got boot-repair and run it. The problem remains & I got this report. I also run as root in terminal $ sudo update-initramfs -u and this is what I got: update-initramfs: Generating /boot/initrd.img-3.2.0-24-generic-pae cryptsetup: WARNING: failed to detect canonical device of /dev/sda1 cryptsetup: WARNING: could not determine root device from /etc/fstab /tmp/mkinitramfs_EIDlHy/scripts/classmate-bottom/45xconfig: 9: .: Can't open /scripts/casper-functions What else? My pc is Intel® Core™ i7 CPU 870 @ 2.93GHz × 8, graphs is GeForce 8400 GS/PCIe/SSE2, memory is 7,8 GiB. I have two questions: Is this a bug in the newest kernel I should report? Is there anything I can do appart from a fresh install?

  Read the article

• Dual boot 12.04 and W7 - keybaord and screen not responsive

  - by Saariko

  I installed 12.04 using WUBI on a working W7 64bit system. both KB and mouse work perfect during the BIOS boot, and on the bootmgr, I can select Windows 7 or Ubuntu to load. Once I select Ubuntu, the KB and mouse seem to loose their power (light on the mouse and Numlock leds go off) After couple of seconds, the screen gets blurry. The screen pops back at the Ubuntu login screen, the mouse gets activated (light works, as well as mouse pointer is moving) However, the keyboard is not responsive to any click, nor does any icon on the login screen. - Using the mouse, I can't select the virtual keyboard, nor the shutdown icon - like it's not accepting any mouse clicks. The following Q&A didn't answer: Keyboard not responding at login with 12.04 dual boot on toshiba satellite L775 which links to a post on the web I also tried 12.04 - Windows 7 Dual boot - not responding to keyboard in boot menu - that goes beyond the login screen, but still didnt' assist me. It's a wired USB KB The board is an Intel board, and there isn't even a PS/2 connection anymore. Tried moving around the USB's Tried removing the Mouse, and only have the KB. Neither helped.

  Read the article

• USB ports causing Wireless and Mobile Phone tethering drop out

  - by chrolli

  I have a problem with my USB ports and I can't seem to pinpoint the problem. I'm hoping that I can get some idea as to how to troubleshoot my problem. Problem description: I recently bought a USB Wireless Adapter in order to connect my Desktop PC to the WLAN. The dongle keeps dropping off connection regularly on average once a minute. And the connection is slow. What I've tried: I installed a network scanner to determine signal strength. The PC/adapter combo is getting about 70% signal strength. I have a laptop that has an internal Wireless adapter. I moved the laptop near the location of the PC. The signal strength was above 90%. I installed the USB adapter on the laptop. I placed the laptop near the location of the PC. The signal strength was above 80%. And there is no drop out issue. I've isolated the problem to be on the PC. I used internet tethering on my mobile phone in order to test the USB ports. I get the same problem, themobile phone keeps dropping in and out. I plugged the adapter and phone on all USB ports, and it is still dropping out on all ports. I've isolated the problem to be the Motherboard, USB hub. I updated the BIOS, and USB driver. Still dropping out. I noticed that when I used the mobile phone tethering method, the phone (iphone 5) is guarenteed to drop out and does not appear to charge if I jiggle the the 8-pin connector on the base of the phone. If I push the pin tightly on the phone, the phone starts charging, as soon as I let go, it stops and drops out from the PC. This is strange because this doesn't happen when it is plugged to the powerboard. Which means that the 8 pin connector is fine. I'm not sure what the problem is. I assume that it is to do with the USB ports not supplying enough power which in turn causes the devices to intermittently drop out. The reason I say this is because the USB cable works fine when plugged into a powerboard with enough power supplied to the phone. Only when it is plugged into the USB port on the PC, does it drop out. My motherboard is Asus P8z68-v le. My Wireless adapter is the D-link DWA131. I can't seem to find any settings in the BIOS to increase the south bridge voltage so as to supply more power to the USB ports. Although this problem only occurs when I'm trying to hook up to a device supplying internet connection. My USB HDD, Flash drives, and Mouse and Key are working fine! Any suggestions please?

  Read the article

• Split internal USB pinouts - is it possible?

  - by TM

  I've currently got a situation in my PC where I have 3 devices that connect to the motherboard via the onboard USB pinouts. The problem is, I only have two sets of USB pinouts on my motherboard. Is there any way of connecting two devices to one set of pinouts? Essentially, I'm looking for the functionality of a USB hub, but I'd like it to be inside the case, and provide pinouts rather than regular USB ports. Update: I don't need any more USB ports, I have devices that use the USB pinouts. I already have extra USB ports that aren't used, so adding an PCI USB card doesn't really help anything.

  Read the article

• USB Device Not Recognized (Mac)

  - by Nargis

  Fortunately, my Mac-pro also made one of my USB storage devices inoperable. My data loss in that USB device but such as another USB device and USB keyboard are unaffected. I have heard that my friend usually trigger this problem by having at least two devices plugged in - typically thumb drives/USB flash drives, and then once a second flash drive is plugged in that become unrecognized. I have only two USB ports and first I think port loose when I connect two USB devices. But later I found these hidden files (“.Spotlight-V100”, “.TemporaryItems”, “.Trashes”, and “._.Trashes”) are created by Mac OS. And before unrecognized that USB device I have deleted these files and my friend had also done the same action. Now I don’t want to test for next USB device to become unrecognized and I won’t deleted any hidden system file inside the flash drives. But I really want to know why these problems happened. Can I delete these hidden files when I only connect to virtual machine (Vista), because I used to delete all useless hidden files from USB flash drives? Any suggestions or thoughts to prevent this or alternative suggestions to fix the problem that take lossless would be much appreciated.

  Read the article

• power management of USB-enclosed hard drives

  - by intuited

  With a typical USB hard drive enclosure, is the full range of drive power management functionality available? In what may be an unrelated matter: is it possible to suspend a PC without unmounting an attached USB-powered drive, and then remounting it on resume? This is the behaviour I'm currently seeing (running Ubuntu linux 10.10). Are there certain models or brands that provide more complete control over this aspect of drive operation? My Friendly Neighbourhood Computer Store carries (part of) the Vantec Nexstar product line.

  Read the article

• Mounting a usb floppy disk drive in Ubuntu 11.04

  - by Jocky B

  I have tried to mount my usb floppy disk drive in 11.04 Natty. So far I have managed to use the udisks --mount/dev/sdf command in terminal, but get a message that I have not stated a filetype "john@john-desktop:~$ udisks --mount /dev/sdf Mount failed: Error mounting: mount: you must specify the filesystem type" This is the result I get when trying to mount the usb floppy disk drive. Anyone know how to proceed Cheers

  Read the article

• USB Wifi that works with 12.04

  - by Colin Matheson

  I have done several hours of searching and I am still looking for a few USB wifi adaptors that run in 12.04 with no additional driver installations or other fiddling. I am looking to plug in the adaptor and have the laptop recognize and start connecting. We have 30 older laptops with flaky internal wifi cards so I thought that if I could find a $10-$20 USB adaptor that work reliably in 12.04 I could plug it in and solve all my connectivity problems for a few hundred dollars.

  Read the article

• Should Exterrnal USB hard drive auto mount Ubuntu 12.04.01 LTS

  - by Chris Good

  I want to have external USB hard drives automatically mounted when plugged in. I have 2 drives exactly the same except for volume label. They both have the same UUID. I want to be easily able to swap them as I'm using them for backups and want to keep 1 at home for off site backup. I've set up the /etc/fstab so they should mount at different places based on their volume label: /etc/fstab : LABEL=Passport1 /media/Passport1 ntfs defaults,windows_names,locale=en_US.utf8 0 0 LABEL=Passport2 /media/Passport2 ntfs defaults,windows_names,locale=en_US.utf8 0 0 blkid shows : ... /dev/sdc1: LABEL="Passport2" UUID="4E1AEA7B1AEA6007" TYPE="ntfs" /dev/sdd1: LABEL="Passport1" UUID="4E1AEA7B1AEA6007" TYPE="ntfs" They both mount automatically during reboot but do not mount when just plugged in to a running system. I've read lots of stuff about this, much of it is old so I'm not sure if it applies. I've read some stuff that says the mounts should happen automatically when plugged in, and lots of other stuff that says you have to install other software to make this happen, although much of it just seems to set up the fstab. What's the real story? Here is /var/log/syslog when drive is plugged in: Dec 14 11:22:58 ausyvutims1 kernel: [66221.300196] usb 1-1: new high-speed USB device number 6 using ehci_hcd Dec 14 11:22:58 ausyvutims1 mtp-probe: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1" Dec 14 11:22:58 ausyvutims1 mtp-probe: bus: 1, device: 6 was not an MTP device Dec 14 11:22:58 ausyvutims1 kernel: [66221.656020] scsi7 : usb-storage 1-1:1.0 Dec 14 11:22:59 ausyvutims1 kernel: [66222.661534] scsi 7:0:0:0: Direct-Access WD My Passport 0748 1016 PQ: 0 ANSI: 6 Dec 14 11:22:59 ausyvutims1 kernel: [66222.666466] scsi 7:0:0:1: Enclosure WD SES Device 1016 PQ: 0 ANSI: 6 Dec 14 11:22:59 ausyvutims1 kernel: [66222.667739] sd 7:0:0:0: Attached scsi generic sg3 type 0 Dec 14 11:22:59 ausyvutims1 kernel: [66222.667913] ses 7:0:0:1: Attached Enclosure device Dec 14 11:22:59 ausyvutims1 kernel: [66222.668047] ses 7:0:0:1: Attached scsi generic sg4 type 13 Dec 14 11:22:59 ausyvutims1 kernel: [66222.678473] sd 7:0:0:0: [sdc] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) Dec 14 11:22:59 ausyvutims1 kernel: [66222.687700] sd 7:0:0:0: [sdc] Write Protect is off Dec 14 11:22:59 ausyvutims1 kernel: [66222.687705] sd 7:0:0:0: [sdc] Mode Sense: 47 00 10 08 Dec 14 11:22:59 ausyvutims1 kernel: [66222.701076] sd 7:0:0:0: [sdc] No Caching mode page present Dec 14 11:22:59 ausyvutims1 kernel: [66222.701081] sd 7:0:0:0: [sdc] Assuming drive cache: write through Dec 14 11:22:59 ausyvutims1 kernel: [66222.738062] sd 7:0:0:0: [sdc] No Caching mode page present Dec 14 11:22:59 ausyvutims1 kernel: [66222.738068] sd 7:0:0:0: [sdc] Assuming drive cache: write through Dec 14 11:22:59 ausyvutims1 kernel: [66222.754558] sdc: sdc1 Dec 14 11:22:59 ausyvutims1 kernel: [66222.792006] sd 7:0:0:0: [sdc] No Caching mode page present Dec 14 11:22:59 ausyvutims1 kernel: [66222.792012] sd 7:0:0:0: [sdc] Assuming drive cache: write through Dec 14 11:22:59 ausyvutims1 kernel: [66222.792016] sd 7:0:0:0: [sdc] Attached SCSI disk Dec 14 11:22:59 ausyvutims1 ata_id[16971]: HDIO_GET_IDENTITY failed for '/dev/sdc': Invalid argument Thanks for any help offered

  Read the article

• Cannot Boot Win XP or Ubuntu from hard drive - get Input Not Supported

  - by Jim Hudspeth

  1) Downloaded 11.10 ISO file to Dell XP Workstation 2) Made bootable USB using Pendrivelinux 3) Installed to harddrive using option 1 (Install along side Windows) 4) Rebooted when instructed 5) Booted into Ubuntu just fine (first time) 6) Attempted restart - got first splash screen followed by "input not supported" - tapped ESC and eventually got into Ubuntu 7) Later attempts failed - got "input not supported"; no eventual boot 8) Many retries holding / tapping various keys - same result 9) Booted from USB - all files appear to be in place - can access GRUB on harddrive Suggestions appreciated - must to be able to boot XP. Thanks in advance

  Read the article

• After upgrading to 12.10 usb drives fail to mount

  - by John Shore

  Following upgrade to 12.10, my usb drives - both pen drives and a usb hard drive - fail to mount with the error message: Unable to mount *name of drive* volume Adding read ACL for uid 1000 to '/media/*my home file name*' failed: Operation not supported This is on a desktop Dell Inspiron 530. I also have a Dell Inspiron Mini 10 netbook which I also upgraded to 12.10 (slightly smaller installation on a flash hard drive). all devices mount automatically without problems on this computer.

  Read the article

• Mouse / Usb don't work

  - by Enrico

  I just start now with Xubuntu (11.10) and don't know why but my mouse work strage, so if i move my mouse it move like jump not fluid (but if i use my pad there aren't any problem). another really strange thing is if I take off the mouse (usb) and put back doesn't work anymore.also if i put pen drive nothing uppen, maybe it's some usb problem or something i don't know. PC: Fujitsu Siemens Amilo. thank for your help Enrico

  Read the article

• USB mouse / keyboard not working after suspend

  - by Frode

  After upgrade from 12.04 to 12.10, the USB mouse/keyboard is not working when the laptop wake up from suspend. I need to remove and insert the USB dongle to get keyboard/mouse working again. This was not a problem before the upgrade. 6 months ago I had the same problem when upgrading from 11.10 to 12.04. At that time I solved it by doing a clean install of 12.04. Updated: Issue resolved after installing ppa:xubuntu-dev/xfce-4.12

  Read the article

• Create windows XP's live USB using ubuntu

  - by Avnish

  My hard disk crashed.. I can run Ubuntu using a pendrive by making a live USB of Ubuntu, which I made using Windows 7. In the similar way, I want to run Windows XP too using another pen drive (without hard disk) and I want to make it from Ubuntu (12.04). The resources I have are Ubuntu's live USB, Windows XP and Windows 7 installation disk, some blank DVDs but no hard drive. I have very basic knowledge of Linux. Thanks

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >