Search Results

Search found 8381 results on 336 pages for 'bad neighbor'.

Page 297/336 | < Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >

• Hot-swap drive got new name, can I change it on-the-fly?

  - by T.J. Crowder

  One of the HDDs in my server's RAID config failed, so I took it out of the array and had the data center hot-swap it. They've done that, but now the new drive is /dev/sdc rather than /dev/sda. I suspect — correct me if I'm wrong — that if I reboot the server, it will be /dev/sda again, so I'm hesitant to add it back to the array as /dev/sdc because I don't want to lay a trap for myself to fall into on the next reboot. I'd just as soon not reboot the server if I don't need to (if I do need to, well, too bad for me). Is there a way I can change the device name from /dev/sdc to /dev/sda without rebooting? This is on Ubuntu 10.04 LTS. It's an md array ("Linux Software RAID"), where currently one of the devices (there are a couple of them) looks like this ("degraded" because I've removed the old /dev/sda from it): # mdadm --detail /dev/md0 /dev/md0: Version : 00.90.03 Creation Time : Sun Oct 11 21:07:54 2009 Raid Level : raid1 Array Size : 97536 (95.27 MiB 99.88 MB) Used Dev Size : 97536 (95.27 MiB 99.88 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Jun 30 09:31:16 2011 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 UUID : 496be7a5:ab9177ed:7792c71e:7dc17aa4 Events : 0.112 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed Thanks, Update: Reading through the kernel md documentation, I suspect that if the name changes on reboot, it won't matter. (Good design, that.) Here's why: Boot time autodetection of RAID arrays When md is compiled into the kernel (not as module), partitions of type 0xfd are scanned and automatically assembled into RAID arrays. This autodetection may be suppressed with the kernel parameter "raid=noautodetect". As of kernel 2.6.9, only drives with a type 0 superblock can be autodetected and run at boot time. The kernel parameter "raid=partitionable" (or "raid=part") means that all auto-detected arrays are assembled as partitionable. I do have md compiled into the kernel, so I'm rebuilding the array now and will do the reboot to see what happens. Even if it works, the above doesn't answer the question I actually asked, so unless someone comes along and answers that question in the meantime (I'd be interested, even if it's not necessary for what I'm doing this very moment), I'll just delete the question to keep noise down.

  Read the article

• serving mp3s to mobile devices is flooding nginx with partial requests

  - by drumfire

  I am serving mp3s with a minimalistic nginx server. What I see in my log files is that there are a lot of requests, in particular from AppleCoreMedia and sometimes Android useragents, that flood the server with short requests. Sometimes they keep requesting to download the same partial content for a very long time; sometimes more than an hour. For example: "GET /somefile.mp3 HTTP/1.1" 206 33041 "AppleCoreMedia/1.0.0.9B206 (iPhone; U; CPU OS 5_1_1 like Mac OS X; en_us)" "GET /somefile.mp3 HTTP/1.1" 206 33041 "AppleCoreMedia/1.0.0.9B206 (iPhone; U; CPU OS 5_1_1 like Mac OS X; en_us)" "GET /somefile.mp3 HTTP/1.1" 206 33041 "AppleCoreMedia/1.0.0.9B206 (iPhone; U; CPU OS 5_1_1 like Mac OS X; en_us)" [...] I also get a lot, but not as much, of these: "-" 400 0 "-" "-" 400 0 "-" The IP addresses are always from clients that start downloading shortly after that request, usually they have roughly the same UserAgent as in the first example. emphasized text I have enabled server throttling and connection limits in nginx to limit the huge amount of log entries from equivalent IPs at least somewhat. There was a performance issue when I saw the same behaviour on the previous server that used Apache. I installed nginx on a better server then moved the site. When Apache could not handle more connections from the increasing number of clients effectively that server was ddossed. There was no bandwidth issue with already connected clients and I don't know if the already connected clients were using more than one connection at a time. Please tell me: Are clients that appear to get stuck on a download a Bad Thing™ I heard people say their mobile bandwidth use was much higher than they could account for. I'm thinking this type of client behaviour can account for that. And costs us more bandwidth too. Which up to date alternatives exist out there that can handle serving this type of data better than plain HTTP? Useful general insights for someone who just came into this field straight out of the late 90s. :-)

  Read the article

• High load on X3220 Quad Core Linux Apache server

  - by John Templar

  I'm seriously in need of help. My sites are now nearly impossible to use because of massive loads on my server. I'm already a month late on my mortgage and this really isn't helping my situation. I've been working on fixing this intermittent load problem for months (never this bad). I'm suspecting some kind of attack since I'm under DDOS attack a lot! I've been trying to figure out what is causing the load but I'm afraid I just don't have the experience or knowledge to understand all the data I've been looking at. I don't even know where to begin or how to test for the large array of attacks out there. Here's some data you might find useful... Server: Xeon X3220 Quad Core 2.4 GHz - Linux, FreeBSD 500 GB HD and 8 Gig of Ram. Runs Centos release 5.7 Server Version: Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 mod_qos/9.74 Warning: All sites are softcore adult sites - mostly fantasy art like elves and amazons. 1) Sites may run fine for weeks or just days at less than 10 load then start jumping to 40-80 load - no idea why. Same sites, same mods, same amount of traffic - just WHAM! 2) I get an email almost every day that says: "Large Number of Failed Login Attempts from IP (different each time)". My webhost (who almost never helps me) told me it was a udp flood or something. 3) I've changed the port for MySQL from the default. If I ever put it back to the default - I get Loads of over 100 from what must be a constant mysql port flood. 4) I've reconfigured MYSQL. Link: http://www.deadlyamazons.com/logs/mycnf.txt 5) I have 3 Joomla Jomsocial networks. I've spent a couple weeks turning all the mods/plugins off, waiting a day and then turning them back on the next day or later if there isn't any change (there hasn't been). For example, on Thursday I'll turn off videos, on Friday I'll turn off chat.. etc and nothing changes the load appreciably. 6) Joomla info: All SEF turned off - sh404sef completely disabled and removed. Components: Joomla 1.5.22, Jomsocial 2.0.5, Kunena 1/31/2011, HWDMediashare 11/22/2010 and JBolo Chat 2.7.3, Comet Chat or Envolve Chat. Page Compression is on, Cache is on 15 mins. Please click on this forum to see links to all my reports: http://forum.joomla.org/viewtopic.php?f=433&t=706035&p=2777500#p2777500 Any help would be highly appreciated.

  Read the article

• Ubuntu 12.04 crash analysis - strange binary data on all open files at the moment of crash

  - by lanbo

  A couple of hours ago we got a system crash on Ubuntu 12.04. We checked all the log files and there is nothing suspicious to blame to. Last stuff that was logged was some dovecot activity. There are no kernel panic messages. Nothing. It is a new server (new hardware) we are testing before production. And because it is new hard, I'm suspicious the problem may be due to some faulty hardware. We already run memtester with no problem detected. I'll be happy to hear from other hardware testing tools (the machine has SSD). Anyway, the thing I wanted to ask you is a different one. The strange thing is on every open file at the moment of the crash we found the next sequence of symbols was written into them: "@^@^@^@^@^@^@...". For example, on the syslog log file we got: Apr 16 15:53:56 odyssey dovecot: pop3-login: Aborted login (auth failed, 1 attempts): user=<info>, method=PLAIN, rip=46.29.255.73, lip=5.9.58.177 ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^ [these continues for about 1000 chars...] ^@^@^@^@Apr 16 15:55:12 odyssey kernel: imklog 5.8.6, log source = /proc/kmsg started. We got all these symbols in all open files. These include: syslog, mail.log, kern.log, ... But also on some logs that are output by php scripts run in CRONs from user accounts (not root). So, any idea why all open files got these characters written during the crash? This is pretty bad since the crash corrupted many files (we don't even know which other ones may be affected). We are suspicious that all open files (in write mode maybe) at the moment of the crash got all these symbols inserted. Why is that? BTW [in case it helps], the system automatically rebooted after the crash but Apache did not start. There were not traces in /var/apache2/*log why apache did not start. After running a "service apache2 start" it started with no problems. Also, we rebooted the machine manually and Apache also started on reboot. But it did not start after the crash and no errors were reported. Thanks guys!

  Read the article

• Adaptec 5805 not recognized after reboot

  - by Rakedko ShotGuns

  After rebooting the system, the controller is not recognized. It only works if the computer is shut down and turned off. I have recently updated the firmware to "Adaptec RAID 5805 Firmware Build 18948". How do I fix the problem? Configuration summary --------------------------- 1. Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priority High Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1

  Read the article

• OS X server large scale storage and backup

  - by user135217

  I really hope this question doesn't come across as trolling or asking for buying advice. It's not intended. I've just started working for a small ad agency (40 employees). I actually quit being a system administrator a few years ago (too stressful!), but the company we're currently outsourcing our IT stuff to is doing such a bad job that I've felt compelled to get involved and do what I can to improve things. At the moment, all the company's data is stored on an 8TB external firewire drive attached to a Mac Mini running OS X Server 10.6, which provides filesharing (using AFP) for the whole company. There is a single backup drive, which is actually a caddy containing two 3TB hard drives arranged in RAID 0 (arrggghhhh!), which someone brings in as and when and copies over all the data using Carbon Copy Cloner. That's the entirety of the infrastructure, and the whole backup and restore strategy. I've been having sleepless nights. I've just started augmenting the backup process with FreeBSD, ZFS, sparse bundles and snapshot sends to get everything offsite. I think this is a workable behind the scenes solution, but for people's day to day use I'm struggling. Given the quantity and importance of the data, I think we should really be looking towards enterprise level storage solutions, high availability and so on, but the whole company is all Mac all the time, and I cannot find equipment that will do what we need. No more Xserve; no rack storage; no large scale storage at all apart from that Pegasus R6 that doesn't seem all that great; the Mac Pro has fibre channel, but it's not a real server and it's ludicrously expensive; Xsan looks like it's on the way out; things like heartbeatd and failoverd have apparently been removed from Lion Server; the new Mac Mini only has thunderbolt which severely limits our choices; the list goes on and on. I'm really, really not trying to troll here. I love Macs, but I just genuinely don't know where I'm supposed to look for server stuff. I have considered Linux or FreeBSD and netatalk for serving files with all the server-y goodness those OSes bring, but some the things I've read make me wonder if it's really the way to go. Also, in my own (admittedly quite cursory) experiments with it, I've struggled to get decent transfer speeds. I guess there's also the possibility of switching everyone off AFP and making them use SMB or NFS, but I understand that this can cause big problems with resource forks and file locks. I figure there must be plenty of all Mac companies out there. If you're the sysadmin at one, what do you use? Any suggestions very gratefully received.

  Read the article

• Error: Multilib version problems found

  - by Kovács Ákos

  What causes this error? Error: Multilib version problems found. This often means that the root cause is something else and multilib version checking is just pointing out that there is a problem. Eg.: 1. You have an upgrade for glibc which is missing some dependency that another package requires. Yum is trying to solve this by installing an older version of glibc of the different architecture. If you exclude the bad architecture yum will tell you what the root cause is (which package requires what). You can try redoing the upgrade with --exclude glibc.otherarch ... this should give you an error message showing the root cause of the problem. 2. You have multiple architectures of glibc installed, but yum can only see an upgrade for one of those arcitectures. If you don't want/need both architectures anymore then you can remove the one with the missing update and everything will work. 3. You have duplicate versions of glibc installed already. You can use "yum check" to get yum show these errors. ...you can also use --setopt=protected_multilib=false to remove this checking, however this is almost never the correct thing to do as something else is very likely to go wrong (often causing much more problems). Protected multilib versions: glibc-2.12-1.107.el6_4.5.i686 != glibc-2.12-1.107.el6_4.2.x86_64 Error: Protected multilib versions: db4-4.7.25-18.el6_4.i686 != db4-4.7.25-17.el6.x86_64 You could try using --skip-broken to work around the problem ** Found 10 pre-existing rpmdb problem(s), 'yum check' output follows: 32:bind-libs-9.8.2-0.17.rc1.el6_4.6.x86_64 is a duplicate with 32:bind-libs-9.8.2-0.17.rc1.el6_4.5.x86_64 chkconfig-1.3.49.3-2.el6_4.1.x86_64 is a duplicate with chkconfig-1.3.49.3-2.el6.x86_64 db4-4.7.25-18.el6_4.x86_64 is a duplicate with db4-4.7.25-17.el6.x86_64 12:dhcp-common-4.1.1-34.P1.el6_4.1.x86_64 is a duplicate with 12:dhcp-common-4.1.1-34.P1.el6.centos.x86_64 glibc-2.12-1.107.el6_4.5.x86_64 is a duplicate with glibc-2.12-1.107.el6_4.2.x86_64 glibc-common-2.12-1.107.el6.x86_64 has missing requires of glibc = ('0', '2.12', '1.107.el6') glibc-common-2.12-1.107.el6_4.2.x86_64 is a duplicate with glibc-common-2.12-1.107.el6.x86_64 glibc-common-2.12-1.107.el6_4.5.x86_64 is a duplicate with glibc-common-2.12-1.107.el6_4.2.x86_64 krb5-libs-1.10.3-10.el6_4.6.x86_64 is a duplicate with krb5-libs-1.10.3-10.el6_4.4.x86_64 tzdata-2013g-1.el6.noarch is a duplicate with tzdata-2013c-2.el6.noarch

  Read the article

• Active Directory Corrupted In Windows Small Business Server 2011 - Server No Longer Domain Controller

  - by ThinkerIV

  I have a rather bad problem with my Windows SBS 2011. First of all, I'll give the background to what caused the problem. I was setting up a new small business server network. I had my job about finished. The server was working great, all the workstations had joined the domain, and I had all my applications and data moved to the server. I thought I was done. But then it happened. I tried adding one more computer to the domain, and to my dismay the computer name was set to the same name as the server. Apparently when a computer joins a domain with the same name as another machine that is already on the domain, it overrides the first one. For normal workstations, this is not a big deal, you just delete the computer from AD and rejoin the original computer to the domain. However, for a server that is the domain controller it is a whole different story. Since the server got overridden in AD, it is no longer the domain controller. The DNS service is not working and all kinds of other services are failing also. So the question is, what are my options? I am embarrassed to admit it, but since this is a new server one thing I did not have setup yet was backup. So I have no backups to work from. I am worried that things are broken enough that I might need to do a reinstall. However, I already have several days worth of configuration into this server, so I would obviously prefer if there was a fix that would prevent me from needing to do a reinstall. All the server components are there and installed correctly, but they are misconfigured (I think it is basically just Active Directory). So I have the feeling that if I did the right thing I could solve the issue without a reinstall. Is there anyway to rerun the component that installs the initial configuration to "convert" the base windows server 2008 r2 install into a SBS? In other words in the program files folder there is an application called SBSsetup.exe, is there anyway to rerun this and have it reconfigure AD, etc. to work with SBS? Any insight will be greatly appreciated. Thanks.

  Read the article

• How to keep group-writeable shares on Samba with OSX clients?

  - by Oliver Salzburg

  I have a FreeNAS server on a network with OSX and Windows clients. When the OSX clients interact with SMB/CIFS shares on the server, they are causing permission problems for all other clients. Update: I can no longer verify any answers because we abandoned the project, but feel free to post any help for future visitors. The details of this behavior seem to also be dependent on the version of OSX the client is running. For this question, let's assume a client running 10.8.2. When I mount the CIFS share on an OSX client and create a new directory on it, the directory will be created with drwxr-x-rx permissions. This is undesirable because it will not allow anyone but me to write to the directory. There are other users in my group which should have write permissions as well. This behavior happens even though the following settings are present in smb.conf on the server: [global] create mask= 0666 directory mask= 0777 [share] force directory mode= 0775 force create mode= 0660 I was under the impression that these settings should make sure that directories are at least created with rwxrwxr-x permissions. But, I guess, that doesn't stop the client from changing the permissions after creating the directory. When I create a folder on the same share from a Windows client, the new folder will have the desired access permissions (rwxrwxrwx), so I'm currently assuming that the problem lies with the OSX client. I guess this wouldn't be such an issue if you could easily change the permissions of the directories you've created, but you can't. When opening the directory info in Finder, I get the old "You have custom access" notice with no ability to make any changes. I'm assuming that this is caused because we're using Windows ACLs on the share, but that's just a wild guess. Changing the write permissions for the group through the terminal works fine, but this is unpractical for the deployment and unreasonable to expect from anyone to do. This is the complete smb.conf: [global] encrypt passwords = yes dns proxy = no strict locking = no read raw = yes write raw = yes oplocks = yes max xmit = 65535 deadtime = 15 display charset = LOCALE max log size = 10 syslog only = yes syslog = 1 load printers = no printing = bsd printcap name = /dev/null disable spoolss = yes smb passwd file = /var/etc/private/smbpasswd private dir = /var/etc/private getwd cache = yes guest account = nobody map to guest = Bad Password obey pam restrictions = Yes # NOTE: read smb.conf. directory name cache size = 0 max protocol = SMB2 netbios name = freenas workgroup = COMPANY server string = FreeNAS Server store dos attributes = yes hostname lookups = yes security = user passdb backend = ldapsam:ldap://ldap.company.local ldap admin dn = cn=admin,dc=company,dc=local ldap suffix = dc=company,dc=local ldap user suffix = ou=Users ldap group suffix = ou=Groups ldap machine suffix = ou=Computers ldap ssl = off ldap replication sleep = 1000 ldap passwd sync = yes #ldap debug level = 1 #ldap debug threshold = 1 ldapsam:trusted = yes idmap uid = 10000-39999 idmap gid = 10000-39999 create mask = 0666 directory mask = 0777 client ntlmv2 auth = yes dos charset = CP437 unix charset = UTF-8 log level = 1 [share] path = /mnt/zfs0 printable = no veto files = /.snap/.windows/.zfs/ writeable = yes browseable = yes inherit owner = no inherit permissions = no vfs objects = zfsacl guest ok = no inherit acls = Yes map archive = No map readonly = no nfs4:mode = special nfs4:acedup = merge nfs4:chown = yes hide dot files force directory mode = 0775 force create mode = 0660

  Read the article

• Why can't I connect to remote Microsoft SQL Server through SSH tunnel?

  - by Alexander

  I have at home a D-Link DIR-615 C1 router with DD-WRT. I set up the SSH server on the router, and log on through an SSH2-RSA passphrase-protected key. That router is the gateway between the local network and the internet. One of the computers on that network has Microsoft SQL Server 2008 installed, with TCP/IP protocol enabled through port 1433. I've set up port forwarding on the router, so that remote connections are possible and are, in fact, working (some developers log on remotely without problems). I am part of another network, that has internet access through a proxy server, which only has ports 80 and 443 opened. I can't connect to that MSSQL server on that remote server because 1433 port is closed on this network. I connected (using Putty) through 443 port to my router's SSH server, and set up 2 tunnels. One is for RDP (3389), and it's working. The other is for 1433 port, to connect to the server. I can't connect through the SSH tunnel to the MS SQL Server, neither through telnet, or through GUI clients. Am I missing something? Additional details: on connect, I get this error from SQL Server Management Studio: TITLE: Connect to Server Cannot connect to localhost:14330. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 3) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=3&LinkId=20476 BUTTONS: OK The tunnel is configured like this: L14330 192.168.0.103:1433 192.168.0.103 is the permanent address of the SQL Server on the LAN. I also successfully forwarded TCP traffic of 3389 port to that IP, so tunneling is working to that IP address. When connecting without tunnel, through Microsoft SQL Server Management Studio, using the same method the connection establishes. Too bad my proxy doesn't allow 1433 port traffic, I wouldn't have this headache.

  Read the article

• Nginx Proxying to Multiple IP Addresses for CMS' Website Preview

  - by Matthew Borgman

  First-time poster, so bear with me. I'm relatively new to Nginx, but have managed to figure out what I've needed... until now. Nginx v1.0.15 is proxying to PHP-FPM v.5.3.10, which is listening at http://127.0.0.1:9000. [Knock on wood] everything has been running smoothly in terms of hosting our CMS and many websites. Now, we've developed our CMS and configured Nginx such that each supported website has a preview URL (e.g. http://[WebsiteID].ourcms.com/) where the site can be, you guessed it, previewed in those situations where DNS doesn't yet resolve to our server, etc. Specifically, we use Nginx's Map module (http://wiki.nginx.org/HttpMapModule) and a regular expression in the server_name of the CMS' server{ } block to 1) lookup a website's primary domain name from its preview URL and then 2) forward the request to the "matched" primary domain. The corresponding Nginx configuration: map $host $h { 123.ourcms.com www.example1.com; 456.ourcms.com www.example2.com; 789.ourcms.com www.example3.com; } and server { listen [OurCMSIPAddress]:80; listen [OurCMSIPAddress]:443 ssl; root /var/www/ourcms.com; server_name ~^(.*)\.ourcms\.com$; ssl_certificate /etc/nginx/conf.d/ourcms.com.chained.crt; ssl_certificate_key /etc/nginx/conf.d/ourcms.com.key; location / { proxy_pass http://127.0.0.1/; proxy_set_header Host $h; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } (Note: I do realize that the regex in the server_name should be "tighter" for security reasons and match only the format of the website ID (i.e. a UUID in our case).) This configuration works for 99% of our sites... except those that have a dedicated IP address for an installed SSL certificate. A "502 Bad Gateway" is returned for these and I'm unsure as to why. This is how I think the current configuration works for any requests that match the regex (e.g. http://123.ourcms.com/): Nginx looks up the website's primary domain from the mapping, and as a result of the proxy_pass http://127.0.0.1 directive, passes the request back to Nginx itself, which since the proxied request has a hostname corresponding to the website's primary domain name, via the proxy_set_header Host $h directive, Nginx handles the request as if it was as direct request for that hostname. Please correct me if I'm wrong in this understanding. Should I be proxying to those website's dedicated IP addresses? I tried this, but it didn't seem to work? Is there a setting in the Proxy module that I'm missing? Thanks for the help. MB

  Read the article

• FTP not listing files behind firewall (setsockopt (ignored): Permission denied)

  - by KennyDs

  We are developing a Magento application that has a module that works with FTP. Today we deployed this on the testing environment which is setup in the following way: Gateway server which has the following iptables rules: # iptables -L -n -v Chain INPUT (policy ACCEPT 2 packets, 130 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 165 13720 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED Chain FORWARD (policy ACCEPT 7 packets, 606 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- eth1 eth0 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 15 965 ACCEPT all -- eth0 eth1 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- eth1 eth1 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 126 packets, 31690 bytes) pkts bytes target prot opt in out source destination These are set at runtime via the following bash script: #!/bin/sh PATH=/usr/sbin:/sbin:/bin:/usr/bin # # delete all existing rules. # iptables -F iptables -t nat -F iptables -t mangle -F iptables -X # Always accept loopback traffic iptables -A INPUT -i lo -j ACCEPT # Allow established connections, and those not coming from the outside iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow outgoing connections from the LAN side. iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT # Masquerade. iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE # Don't forward from the outside to the inside. iptables -A FORWARD -i eth1 -o eth1 -j REJECT # Enable routing. echo 1 > /proc/sys/net/ipv4/ip_forward The gateway server is connected to the WAN via eth1 and is connected to the internal network via eth0. One of the servers from eth1 has the following problem when trying to list files over ftp: $ ftp -vd myftpserver.com Connected to myftpserver.com 220 Welcome to MY FTP Server ftp: setsockopt: Bad file descriptor Name (myftpserver.com:magento): XXXXXXXX ---> USER XXXXXXXX 331 User XXXXXXXX, password please Password: ---> PASS XXXX 230 Password Ok, User logged in ---> SYST 215 UNIX Type: L8 Remote system type is UNIX. Using binary mode to transfer files. ftp> ls ftp: setsockopt (ignored): Permission denied ---> PORT 192,168,19,15,135,75 421 Service not available, remote server has closed connection When I try listing the files in passive mode, same result. When I run the same command on the gateway server, everything works fine so I believe that the issue is happening because of the iptables rules not forwarding properly. Does anyone have an idea which rule I need to add to make this work?

  Read the article

• Recommendations or advice for shared computer control

  - by Telemachus

  Basic scenario: we are a school (overwhelmingly Mac, some Windows machines via BootCamp), and we are considering using DeepFreeze to guard the state of our shared machines. We have roughly 250 machines that are either shared laptops (which move around quite a bit) or common desktops in public spaces. Obviously, we spend a lot of time maintaining the machines and trying to reverse the inevitable drift as people make changes to the computers. We would like to control the integrity of the build we initially put onto the machines without handcuffing users and especially without using Mac's Parental Control software. (We've had nothing but bad experiences with it.) We've been testing DeepFreeze, and so far it's very impressive. But I'm curious to hear if people who have used DeepFreeze or any similar software have any advice or tips. To get things started, I will post my own pros and cons. Pros: The state of the machine is frozen in our chosen state. All changes made to the machine after that disappear upon restart. (This frozen state really appears to cover everything. I have yet to do something to a test machine that isn't instantly healed.) Tons of trivial but time-consuming maintenance is gone in an instant. Also, lots of not-so-trivial breakage should be avoided. There are good options, however, that allow you to create storage spaces either globally or per user. (Otherwise, stored files disappear upon reboot. For some machines, this is a good option itself. Simply warn people: save externally or else; this machine is a kiosk, not your storage space.) Cons: Anytime we actually need to make a change (upgrade basic software, add a printer or an airport permanently, add new software), the process is a bit more complex. Reboot into a special mode (thaw state), make changes, reboot back into frozen mode. If (when?) we forget this, we will end up making changes that disappear after the next reboot. Users will forget to save files correctly (in the right place or externally), and we will have loud, unpleasant conversations explaining that we can't recover the document they worked on all afternoon yesterday. The machine rebooted. The file is gone. These are my initial thoughts, but I would love to hear from other people who have experience with DeepFreeze or any similar software. What should we be careful about? Do the pros outweigh the cons? What gains or problems am I not seeing? Thanks.

  Read the article

• Win-XP Browsers Hang on page load - (waiting for...)

  - by CHarmon

  Hello, I’m having problems with my browsers hanging on loading pages on my desktop machine. I’m using Windows XP Pro with SP3 and fully updated except for IE 8. All three of my browsers, IE 7, Chrome and Firefox are having the same problems. Pages are not being loaded and are hanging on “waiting for …”. The browsers are waiting for the page being loaded or ad servers. Sometimes a page will load but the loading graphic continues to be displayed as if the page were still loading when the page appears to be fully loaded. The problem is bad enough that I can’t really use any of my browsers. I can eventually get most pages to load by stopping and restarting the page load. I have DSL modem with a wireless router and I have been able to eliminate the modem and router from being the source of my problem. My laptop doesn’t have any problems even when hardwired to the router and with the wireless connection disabled. I deleted the NIC and let XP re-install. Also tried a different network cable. Tried the same router port used in the laptop test. One clue that may be important is that I can’t connect to my router using the desktop machine…the page hangs while trying to connect. I can ping the router and I can quickly connect to the router using the laptop. I also can’t use the Windows update process – the page never fully loads. The problem affects other user accounts and even happens in safe mode. I am convinced the problem is with part of the O/S…some layer able to affect all of the browsers. The purpose of this post is to see if anyone has some ideas before I do a XP repair. I have done quite a bit of trouble-shooting: Ran a full anti-virus scan with AVG – no problems. Ran full scans with Spybot, MalwareBytes and Sophos anti-rootkit – no problems. Ran Chkdsk with both options checked. Ran Disk Clean up Defragged RE-installed IE7 Cleared all the browser caches Ran Ccleaner (registry tool) Ran HijackThis – nothing unusual (problem happens in safe mode too) Ran Process Explorer – no unusual processes Used System Restore and fell back several days – no change in the problem Booted to last known good configuration – no change in the problem Ran MicrosoftFixit50199.msi – no change in the problem Any ideas or suggestions would be appreciated…I’m not looking forward to doing a repair on XP. Thanks in advance for any help.

  Read the article

• How can I change how OS X's 'say' command pronounces a word?

  - by jwhitlock

  OS X's say command is useful for some tasks (such as Skype's 'notify me when a contact comes online), but it is pronouncing some names incorrectly. Is there a way to teach say to pronounce a word differently? For example, try: say "Hi, Joel Spolsky" The 'ol' sounds like 'ball' rather than 'old'. I'd like to add an exception that say "Pronounce Spolsky like this", rather than try to teach new linguistic rules. I bet there is a way since it can pronounce "iphone" as Apple wants. Update - After some research, here's what I've learned: Text-to-speech is split between turning the text to phonemes, and then the phonemes are turned into audio using a voice. Changing the voice doesn't effect the phonemes. The Speech Synthesis Manager has some functions for turning text to phonemes, and a method for registering a speech dictionary that will add new text-phoneme maps. However, Apple's speech dictionary must be in a binary form - I didn't find any plist XML. Using dtrace while running say, I found some interesting files opened in /System/Library/PrivateFrameworks/SpeechDictionary.framework/Resources. This is probably the speech dictionary, but they are all binary, except for Homophones, which is XML. Adding entries to Homophones does nothing - it is probably used in speech-to-text. They are also code signed by Apple - changing them may prevent some programs from working. PrefixDictionary CartNames CartLite SymbolDictionary Homophones There are ways to add text versions of application interface elements so VoiceOver works, a lot of which a developer gets for free, but there are tricky bits. The standard here appears to be to use a phonetic spelling as needed. My guesses are: say is a light layer of code on top of the Speech Synthesis Manager. It would be easy for the Apple devs to add a command line option to take the path to a speech dictionary plist for alternate phoneme mapping, but they didn't. It may be a useful open-source project to write a better say. Skype probably uses Speech Synthesis Manager directly, leaving no hooks to change the way my friend's names are pronounced, other than spelling them phonetically, which is silly. The easiest way to make a command line version of say is how JRobert suggested. Here's my quick implementation, using Doug Harris's spelling suggestion: #!/bin/sh echo $@ | tr '[A-Z]' '[a-z]' | sed "s/spolsky/spowlsky/g" | /usr/bin/say Finally, some fun command line stuff: # Apple is weird sqlite3 /System/Library/PrivateFrameworks/SpeechDictionary.framework/Resources/Tuples .dump # Get too much information about what files are being opened sudo dtrace -n 'syscall::open*:entry { printf("%s %s",execname,copyinstr(arg0)); }' # Just fun say -v bad "Joel Spolsky Spolsky Spolsky Spolsky Spolsky, Joel Spolsky Spolsky Spolsky Spolsky Spolsky" echo "scale=1000; 4*a(1)" | bc -l | say

  Read the article

• Why can't I connect to remote Microsoft SQL Server through SSH tunnel?

  - by Alexander

  I have at home a D-Link DIR-615 C1 router with DD-WRT. I set up the SSH server on the router, and log on through an SSH2-RSA passphrase-protected key. That router is the gateway between the local network and the internet. One of the computers on that network has Microsoft SQL Server 2008 installed, with TCP/IP protocol enabled through port 1433. I've set up port forwarding on the router, so that remote connections are possible and are, in fact, working (some developers log on remotely without problems). I am part of another network, that has internet access through a proxy server, which only has ports 80 and 443 opened. I can't connect to that MSSQL server on that remote server because 1433 port is closed on this network. I connected (using Putty) through 443 port to my router's SSH server, and set up 2 tunnels. One is for RDP (3389), and it's working. The other is for 1433 port, to connect to the server. I can't connect through the SSH tunnel to the MS SQL Server, neither through telnet, or through GUI clients. Am I missing something? Additional details: on connect, I get this error from SQL Server Management Studio: TITLE: Connect to Server Cannot connect to localhost:14330. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 3) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=3&LinkId=20476 BUTTONS: OK The tunnel is configured like this: L14330 192.168.0.103:1433 192.168.0.103 is the permanent address of the SQL Server on the LAN. I also successfully forwarded TCP traffic of 3389 port to that IP, so tunneling is working to that IP address. When connecting without tunnel, through Microsoft SQL Server Management Studio, using the same method the connection establishes. Too bad my proxy doesn't allow 1433 port traffic, I wouldn't have this headache.

  Read the article

• SQL Clustering on Hyper V - is a cluster within a cluster a benefit.

  - by Chris W

  This is a re-hash of a question I asked a while back - after a consultant has come in firing ideas in to other teams in the department the whole issue has been raised again hence I'm looking for more detailed answers. We're intending to set-up a multi-instance SQL Cluster across a number of physical blades which will run a variety of different systems across each SQL instance. In general use there will be one virtual SQL instance running on each VM host. Again, in general operation each VM host will run on a dedicated underlying blade. The set-up should give us lots of flexibility for maintenance of any individual VM or underlying blade with all the SQL instances able to fail over as required. My original plan had been to do the following: Install 2008 R2 on each blade Add Hyper V to each blade Install a 2008 R2 VM to each blade Within the VMs - create a failover cluster and then install SQL Server clustering. The consultant has suggested that we instead do the following: Install 2008 R2 on each blade Add Hyper V to each blade Install a 2008 R2 VM to each blade Create a cluster on the HOST machines which will host all the VMs. Within the VMs - create a failover cluster and then install SQL Server clustering. The big difference is the addition of step 4 whereby we cluster all of the guest VMs as well. The argument is that it improves maintenance further since we have no ties at all between the SQL cluster and physical hardware. We can in theory live migrate the guest VMs around the hosts without affecting the SQL cluster at all so we for routine maintenance physical blades we move the SQL cluster around without interruption and without needing to failover. It sounds like a nice idea but I've not come across anything on the internet where people say they've done this and it works OK. Can I actually do the live migrations of the guests without the SQL Cluster hosted within them getting upset? Does anyone have any experience of this set up, good or bad? Are there some pros and cons that I've not considered? I appreciate that mirroring is also a valuable option to consider - in this case we're favouring clustering since it will do the whole of each instance and we have a good number of databases. Some DBs are for lumbering 3rd party systems that may not even work kindly with mirroring (and my understanding of clustering is that fail overs are completely transparent to the clients). Thanks.

  Read the article

• Dell PowerEdge R720 - Corrupted RAID

  - by BT643

  Apologies in advance for the lengthy question. We have a Dell PowerEdge R720 server with: 2 x 136GB SAS drives in RAID 1 for the OS (Ubuntu Server 12.04) 6 x 3TB SATA drives in RAID 5 for data A few days ago we were getting errors when trying to access files on the large RAID 5 partition. We rebooted the server and got a message about the raid controller has found a foriegn config. We've had this before, and just needed to use Dell's RAID configuration utility to import foreign config on the RAID. Last time this worked, but this time, it started doing a disk check then we got this: FSCK has returned the following: "/dev/sdb1 inode 364738 has a bad extended attribute block 7 /dev/sdb1 unexpected inconsistency run fsck manually (i.e without -a or -p options) MOUNTALL fsck /ourdatapartition [1019] terminated with status 4 MOUNTALL filesystem has errors /ourdatapartition errors where found while checking the disk drive for /ourdatapartition Press F to fix errors, I to Ignore or M for Manual Recovery" We pressed F to try and fix the errors, but it eventually errored with: Inode 275841084, i_blocks is 167080, should be 0. Fix? yes Inode 275841141 has an invalid extend node (blk 2206761006, lblk 0) Clear? yes Inode 275841141, i_blocks is 227872, should be 0. Fix? yes Inode 275842303 has an invalid extend node (blk 2206760975, lblk 0) Clear? yes .... Error storing directory block information (inode=275906766, block=0, num=2699516178): Memory allocation failed /dev/sdb1: ***** FILE SYSTEM WAS MODIFIED ***** e2fsck: aborted /dev/sdb1: ***** FILE SYSTEM WAS MODIFIED ***** mountall: fsck /ourdatapartition [1286] terminated with status 9 mountall: Unrecoverable fsck error: /ourdatapartition We noticed one of the drive lights was not lit at all, and thought this may have failed and be the problem. We replaced the drive with a spare, and tried "F" to repair it again, but we keep just getting the same error as above. In the RAID configuration utility, all drives show as "online" and "optimal". We do have this data on another replicated server, so we're not worried about "recovering" anything, we just want to get the system back online asap. The server has 64 or 32GB memory, can't remember off the top of my head, but either way, with a 14TB RAID, I think it may still not be enough. Thanks EDIT - I checked the memory usage while fsck was running as suggested and after 2 or 3 minutes, it looked like this, using up nearly all of our servers memory: When it failed after 5 minutes or so with the error in my post, the memory immediately freed up again:

  Read the article

• What the best way to achieve RPO of zero and lowest possible RTO (less than 15 minutes) with SQL 2008 R2?

  - by Adrian Hope-Bailie

  We are running a payments (EFT transaction processing) application which is processing high volumes of transactions 24/7 and are currently investigating a better way of doing DB replication to our disaster recovery site. Our current and previous strategies have included using both DoubleTake and Redgate to replicate data to a warm stand-by. DoubleTake is the supported solution from the payments software vendor however their (DoubleTake's) support in South Africa is very poor. We had a few issues and simply couldn't ever resolve them so we had to give up on DoubleTake. We have been using Redgate to manually read the data from the primary site (via queries) and write to the DR site but this is: A bad solution Getting the software vendor hot and bothered whenever we have support issues as it has a tendency to interfere with the payment application which is very DB intensive. We recently upgraded the whole system to run on SQL 2008 R2 Enterprise which means we should probably be looking at using some of the built-in replication features. The server has 2 fairly large databases with a mixture of tables containing highly volatile transactional data and pretty static configuration data. Replication would be done over a WAN link to a separate physical site and needs to achieve the following objectives. RPO: Zero loss - This is transactional data with financial impact so we can't lose anything. RTO: Tending to zero - The business depends on our ability to process transactions every minute we are down we are losing money I have looked at a few of the other questions/answers but none meet our case exactly: SQL Server 2008 failover strategy - Log shipping or replication? How to achieve the following RTO & RPO with logshipping only using SQL Server? What is the best of two approaches to achieve DB Replication? My current thinking is that we should use mirroring but I am concerned that for RPO:0 we will need to do delayed commits and this could impact the performance of the primary DB which is not an option. Our current DR process is to: Stop incoming traffic to the primary site and allow all in-flight transaction to complete. Allow the replication to DR to complete. Change network routing to route to DR site. Start all applications and services on the secondary site (Ideally we can change this to a warmer stand-by whereby the applications are already running but not processing any transactions). In other words the DR database needs to, as quickly as possible, catch up with primary and be ready for processing as the new primary. We would then need to be able to reverse this when we are ready to switch back. Is there a better option than mirroring (should we be doing log-shipping too) and can anyone suggest other considerations that we should keep in mind?

  Read the article

• "log on as a batch job" user rights removed by what GPO?

  - by LarsH

  I am not much of a server administrator, but get my feet wet when I have to. Right now I'm running some COTS software on a Windows 2008 Server machine. The software installer creates a few user accounts for running its processes, and then gives those users the right to "log on as a batch job". Every so often (e.g. yesterday at 2:52pm and this morning at 7:50am), those rights disappear. The software then stops working. I can verify that the user rights are gone by using secedit /export /cfg e:\temp\uraExp.inf /areas USER_RIGHTS and I have a script that does this every 30 seconds and logs the results with a timestamp, so I know when the rights disappear. What I see from the export is that in the "good" state, i.e. after I install the software and it's working correctly, the line for SeBatchLogonRight from the secedit export includes the user accounts created by the software. But every few hours (sometimes more), those user accounts are removed from that line. The same thing can be seen by using the GUI tool Local Security Policy > Security Settings > Local Policies > User Rights Assignment > Log on as a batch job: in the "good" state, that policy includes the needed user accounts, and in the bad state, the policy does not. Based on the above-mentioned logging script and the timestamps at which the user rights are being removed, I can see clearly that some GPOs are causing the change. The GPO Operational log shows GPOs being processed at exactly the right times. E.g.: Starting Registry Extension Processing. List of applicable GPOs: (Changes were detected.) Local Group Policy I have run GPOs on demand using gpupdate /force, and was able to verify that this caused the User Rights to be removed. We have looked over local group policies till our eyes are crossed, trying to figure out which one might be stripping these User Rights to "log on as a batch job." We have not configured any local group policies on this machine, that we know of; so is there a default local group policy that might typically do such a thing? Are there typical domain policies that would do this? I have been working with our IT staff colleagues to troubleshoot the problem, but none of them are really GPO experts... They wear many hats, and they do what they need to do in order to keep most things running. Any suggestions would be greatly appreciated!

  Read the article

• How to Remove Extensions From, and Force the Trailing Slash at the End of URLs?

  - by Kronbernkzion

  Example of current file structure: example.com/foo.php example.com/bar.html example.com/directory/ example.com/directory/foo.php example.com/directory/bar.html example.com/cgi-bin/directory/foo.cgi I want to remove HTML, PHP and CGI extensions from, and then force the trailing slash at the end of URLs. So, it could look like this: example.com/foo/ example.com/bar/ example.com/directory/ example.com/directory/foo/ example.com/directory/bar/ example.com/cgi-bin/directory/foo/ I've searched for solution for 17 hours straight and visited more than a few hundred pages on various blogs and forums. I'm not joking. So I think I've done my research. Here is the code that sits in my .htaccess file right now: RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME}\.html -f RewriteRule ^(([^/]+/)*[^./]+)/$ $1.html RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !(\.[a-zA-Z0-9]|/)$ RewriteRule (.*)$ /$1/ [R=301,L] As you can see, this code only removes .html (and I'm not very happy with it because I think it could be done a lot simpler). I can remove the extension from PHP files when I rename them to .html through .htaccess, but that's not what I want. I want to remove it straight. This is the first thing I don't know how to do. The second thing is actually very annoying. My .htaccess file with code above, adds .html/ to every string entered after example.com/directory/foo/. So if I enter example.com/directory/foo/bar (obviously /bar doesn't exist since foo is a file), instead of just displaying message that page is not found, it converts it to example.com/directory/foo/bar.html/, then searches for a file for a few seconds and then displays the not found message. This, of course, is bad behavior. So, once again, I need the code in .htaccess to do the following things: Remove .html extension Remove .php extension Remove .cgi extension Force the trailing slash at the end of URLs Requests should behave correctly (no adding trailing slashes or extensions to strings if file or directory doesn't exist on server) Code should be as simple as possible I would very much appreciate any help. And to first person that gives me the solution, I'll send two $50 iTunes Store gift cards for US store. If this offend anyone, I am truly sorry and I apologize. Thanks in advance. And sorry for such a long post.

  Read the article

• Trouble creating FTP in Server 2008

  - by Saariko

  I have been trying to create an FTP server on my new Server 2008. I have been following both (very detailed and highly published here guides) For setting up using IIS Manager http://learn.iis.net/page.aspx/321/configure-ftp-with-iis-7-manager-authentication/ and For anonymous FTP http://www.trainsignaltraining.com/windows-server-2008-ftp-iis7 I am able to log as an anonymous user. My need is to use a named user, so I need to use the IIS Manager. I get error 530 when trying to log as a user. Connected to 127.0.0.1. 220 Microsoft FTP Service User (127.0.0.1:(none)): ftpmanager 331 Password required for ftpmanager. Password: 530-User cannot log in. Win32 error: Logon failure: unknown user name or bad password. Error details: Filename: Error: 530 End Login failed. ftp> I can not learn from this message anything. My password is set to: 1234 (so I don't think I make a mistake here - testing purposes only ofc) Thank you. Note - I went over other posts on SE that I read, and couldn't get the result: IIS7 Windows Server 2008 FTP -> Response: 530 User cannot log in. FTP Error 530, User cannot log in, home directory inaccessible. Having trouble setting up FTP server on Windows Server 2008 EDIT I think I found some errors with the physical path. Going to Basic settings, and Test Connection on the physical path, gave me the following error: The server is configured to use pass-through authentication with a built-in account to access the specified physical path. However, IIS Manager cannot verify whether the built-in account has access. Make sure that the application pool identity has Read access to the physical path. If this server is joined to a domain, and the application pool identity is NetworkService or LocalSystem, verify that \$ has Read access to the physical path. Then test these settings again. I am not sure which/whom should get access to the Root folder !? I want to point out, I managed to login with a domain user (change authorization and authentication methods) but this is NOT the requested solution. I checked to make sure that the FTP, folders, access is working properly. I am bit lost here. ==== More tries: I have enabled another Allow rule for ALL Users. I still get the same error. It seems that it doesn't matter if i use a correct or wrong password, I still get Error 530.

  Read the article

• How to create NTFS partition in Linux to install Windows 7 from USB?

  - by Michal Stefanow

  I messed up with my computer and need help. Generally: install Windows 7 from USB. Problem: "setup was unable to create a new system partition" When first attempt to install Windows 7 failed I tried Linux live USB, installed distro to HDD, and erased all the existing partitions. Current state (fdisk -l): [writing from other computer so no copy and paste] /dev/sda1 305GB Linux /dev/sda2 7GB Extended /dev/sda5 7GB Linux Swam / Solaris To create a new, NTFS partition: fdisk /dev/sda n (for new) p (for primary) 3 (for partintion number) "No free sectors available" All the HDD was formatted couple of minutes before so there is a lot of free space but how to resize a parition? I cannot find an option for resizing in man fdisk. Some people say I should use gparted but my distro doesn't not contain this package. And my distro doesn't support wireless drivers so I have serious problems with downloading stuff. I tried also using cfdisk but any command results in: "cfdisk bad primary partition 1 partition ends in the final partial cylinder" I tried also removing partition 1 and then creating a new one (so there is no "no free sectors"). I'm receiving a warning: "Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot." After restating: "grub rescue, no known filesystem" It may indicate that some changes have been made BUT when running Windows 7 installed some another error: "Windows cannot be installed to Disk 0 Partition 1" More detailed: "Windows cannot be installed to this hard disk space. Windows must be installed to a partition formatted as NTFS." So formatting drive using Windows 7 installer BUT this time yet another error: "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information" Apparently I cannot access logs (how?) and I am back to drawing board with my live USB (this time showing partition as HPFS/NTFS). Any suggestions how to install Windows 7? Should I reinstall Linux to HDD, erase existing partitions once again, and use Parted rather than gparted (parted is included in the distro). Or maybe should I create another bootable USB such as PartedMagic to painlessly create partitions? I just want to install Windows 7 from USB, my laptop is semi-operational and I am ready to receive some help regarding fdisk and creating NTFS partitions. UPDATE: I did as suggested (removed all the partitions) and tried to install in unallocated space. Tried to create a new partition and format it. Same error: "setup was unable to create a new system partition" Came to the conclusion it may have something to do with TrueCrypt I have recently installed. Right now trying to FIX MBR (as I haven't got possibility to create rescue disc without optical drive)

  Read the article

• Ubuntu and Postfix Configuration Issues

  - by Obi Hill

  I recently installed postfix on Ubuntu Natty. I'm having a problem with the configuration. Firstly here is my postfix configuration file: # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. mydomain = $myorigin myhostname = mail.nairanode.com alias_maps = hash:/etc/postfix/aliases alias_database = hash:/etc/postfix/aliases # this specifies where the virtual mailbox folders will be located virtual_mailbox_base = /var/spool/mail/virtual # this specifies where the virtual mailbox folders will be located virtual_mailbox_base = /var/spool/mail/virtual # this is for the mailbox location for each user virtual_mailbox_maps = mysql:/etc/postfix/mysql_mailbox.cf # and this is for aliases virtual_alias_maps = mysql:/etc/postfix/mysql_alias.cf # and this is for domain lookups virtual_mailbox_domains = mysql:/etc/postfix/mysql_domains.cf # this is how to connect to the domains (all virtual, but the option is there) # not used yet # transport_maps = mysql:/etc/postfix/mysql_transport.cf virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 mydestination = $myorigin, $myhostname, localhost.localdomain, , localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all #mynetworks_style = host # ADDITIONAL unknown_local_recipient_reject_code = 550 maximal_queue_lifetime = 7d minimal_backoff_time = 1000s maximal_backoff_time = 8000s smtp_helo_timeout = 60s smtpd_recipient_limit = 16 smtpd_soft_error_limit = 3 smtpd_hard_error_limit = 12 # Requirements for the HELO statement smtpd_helo_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_hostname, reject_invalid_hostname, permit # Requirements for the sender details smtpd_sender_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_sender, reject_unknown_sender_domain, reject_unauth_$ # Requirements for the connecting server smtpd_client_restrictions = reject_rbl_client sbl.spamhaus.org, reject_rbl_client blackholes.easynet.nl, reject_rbl_client dnsbl.n$ # Requirement for the recipient address smtpd_recipient_restrictions = reject_unauth_pipelining, permit_mynetworks, reject_non_fqdn_recipient, reject_unknown_recipient_do$ # require proper helo at connections smtpd_helo_required = yes # waste spammers time before rejecting them smtpd_delay_reject = yes disable_vrfy_command = yes Here is also my /etc/postfix/aliases: # See man 5 aliases for format postmaster: root Here is also my /etc/mailname: nairanode.com I've also updated my hostname to nairanode.com However, when I run postalias /etc/postfix/aliases I get the following : postalias: warning: valid_hostname: invalid character 47(decimal): /etc/mailname postalias: fatal: file /etc/postfix/main.cf: parameter mydomain: bad parameter value: /etc/mailname Is there something I'm doing wrong?! I noticed that when I replace myorigin = /etc/mailname with myorigin = nairanode.com in my postfix config, I don't see any errors anymore after calling postalias. Is this a bug or something?!

  Read the article

• Melting Laptop Power Supply Tip

  - by AlReece45

  Several (6-7) months ago, my laptop power supply cord got a cut in it and stopped working. Having gotten cheap (and short) power supplies in the past, I decided to buy 2 brand new ones from the manufacturer (ASUS). Now, I used my laptop a little less than usual between February and March. During that time I noticed a few times that the power supply, even though plugged in, did not provide power. Often the computer would just off on me. I figured it was just that one power supply being bad. I had left the alternate at my parent's house in another state and asked them to ship it to me. Now, at work the other day I wanted to get a file off the of hard disk. So I booted it up, knowing that it had a low battery, plugged it in. During the first 2 minutes of use, I was told that the battery was low and I should plug it in. I unplugged it, inspected the end (Being plugged in, this was suspicious), and decided I shouldn't plug it back in-- the plastic on the tip was melting from the heat of the metal on the tip. The computer had simply booted up and I had the file-manager open. It had not been on for more than 10 hours. Now I know that computers tend to get pretty hot. However, the melting point of plastic is usually above 200C.. so that's much hotter than the computer should be generating. I went and bought a THIRD power supply. This time a universal one from Best Buy (it was very fast to buy and test). I tried it out on the computer and it's tip is melting as well. My older laptop that uses the universal power supply uses it perfectly (has been about a week and a part of use now). I have tried using the computer without the battery, with the same effect. Obviously, this is not a problem with the power supply. My room mate and I being trained computer techs were contemplating taking the computer apart and desoldering and resoldering on the power tip. (The computer is about 6 months out of its 2-year warranty). We're hoping that will correct the issue as I would prefer to devote my money on a Good Desktop rather than yet ANOTHER $1200+ laptop. Is there any thing I'm missing here that might cause the the tip on the power unit to melt?

  Read the article

< Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >