Search Results

Search found 9122 results on 365 pages for 'sound card'.

Page 299/365 | < Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >

  • Is my computer slow due to lack of swap

    - by Kristian Jensen
    A few months ago, I installed Ubuntu 12.04 alongside with Windows 7 on my Asus EEE-PC 1015bx. It has a tendency of freezing and when trying to investigate I found that a swap partition of only 256 MB had been created. The Asus EEE-PC 1015bx is born with 1 GByte RAM only and it is not possible to add further or exchange the existing 1 GByte with a larger card. When looking at the system monitor, it looks like all swap is being utilized along with 70-75% of the RAM, even with very few applications running. Can the lack of much swap space be the reason for my computer running slowly and at times freezing? How can I add a swap partition? Or should I add a swap file instead? At the moment, I see two partitions when viewing the system monitor: one 28.6 GByte ext4 partition which must be the one containing Ubuntu and one 100 GByte fuseblk partition which I assume is the one holding Windows. It shows that I have 18.6 GByte free space on the ext4 partition. Can I "take a bite" from the ext4 partition and convert this into a swap partition? I was thinking something like 3 GBytes for swap considering my limited RAM. I hope that someone can guide me through. Thank you. 20th Oct 2012 - Further details Thank you for below answer which I find very useful. I am certainly considering switching to one of your suggested shells as I can see from the Internet that many have posted that these require much fewer resources than ubuntu. It seems to me that lubuntu is the perfect match for my very limited computer. I will have to wait a few days, though, as I am presently limited by a very slow and restricted Internet connection via satellite. But will lubuntu install as simply another shell replacing unity or will it replace ubuntu all together? Will the software that I have installed under ubuntu still be accessible in lubuntu? And can I return to ubuntu if required? Regarding the actual question of swap: When I run gparted, it shows me that there is one ntfs partition of 100 GBytes from where it boots and the before mentioned ext4 partition of 28.6 GBytes is not mentioned. Could it be that my ubuntu installation resides inside this 100 GBytes ntfs partiotion? And if so, can I take a bite of this for my swap partition? Realising that gparted is shown in Danish, I hope that you can make out what I mean. System monitoring shows below details: Once again I sincerely hope that you can help. Thank you.

    Read the article

  • A few questions about integrating AudioKinetic Wwise and Unity

    - by SaldaVonSchwartz
    I'm new to Wwise and to using it with Unity, and though I have gotten the integration to work, I'm still dealing with some loose ends and have a few questions: (I'm on Unity 4.3 as of now but I think it shouldn't make any difference) The base path: The Wwise documentation implies you set this in the AkGlobalSoundEngineInitializer basePath public ivar, which is exposed to the editor. However, I found that this variable is not really used. Instead, the path is hardcoded to /Audio/GeneratedSoundBanks in AkBankPath. I had to modify both scripts to actually look in the path that I set in the editor property. What's the deal with this? Just sloppyness or am I missing something? Also about paths: since I'm on Mac, I'm using Unity natively under OS X and in tadem, the Wwise authoring tool via VMWare and I share the OS X Unity project folder so I can generate the soundbanks into the assets folder. However, the authoring tool (downloaded the latest one for Windows) doesn't automatically generate any "platform-specific" subfolders for my wwise files. That is, again, the Unity integration scripts assume the path to be /Audio/GeneratedSoundBanks/<my-platform>/ which in my case would be Mac (I set the authoring tool to generate for Mac). The documentation says wwise will automatically generate the platform-specific folders but it just dumps all the stuff in GeneratedSoundBanks. Am I missing some setting? cause right now I just manually create the /Mac folder. The C# methods AkSoundEngine.PostEvent and AkSoundEngine.LoadBank for instance, have a few overloads, including ones where I can refer to the soundbanks or events by their ID. However, if I try to use these, for instance: AkSoundEngine.LoadBank(, AkSoundEngine.AK_DEFAULT_POOL_ID) where the int I got from the .h header, I get Ak_Fail. If I use the overloads that reference the objects by string name then it works. What gives? Converting the ID header to C#: The integration comes with a C# script that seems to fork a process to call Python in turn to covert the C++ header into a C# script. This always fails unless I manually execute the Python script myself from outside Unity. Might be a permissions thing, but has anyone experienced this? The Profiler: I set up the Unity player to run in the background and am using the "Profile" version of the plugin. However, when I start the Unity OS X standalone app, the profiler in VMWare does not see it. This I'm thinking might just be that I'm trying to see a running instance of the sound engine inside an OS X binary from a Windows virtual machine. But I'm just wondering if anyone has gotten the Windows profiler to see an OS X Unity binary. Different versions of the integration plugin: It's not clear to me from the documentation whether I have to manually (or write a script to do it) remove the "Profile" version and install the "Release" version when I'm going to do a Release build or if I should install both version in Unity and it'll select the right one. Thanks!

    Read the article

  • How to design a scalable notification system?

    - by Trent
    I need to write a notification system manager. Here is my requirements: I need to be able to send a Notification on different platforms, which may be totally different (for exemple, I need to be able to send either an SMS or an E-mail). Sometimes the notification may be the same for all recipients for a given platform, but sometimes it may be a notification per recipients (or several) per platform. Each notification can contain platform specific payload (for exemple an MMS can contains a sound or an image). The system need to be scalable, I need to be able to send a very large amount of notification without crashing either the application or the server. It is a two step process, first a customer may type a message and choose a platform to send to, and the notification(s) should be created to be processed either real-time either later. Then the system needs to send the notification to the platform provider. For now, I end up with some though but I don't know how scalable it will be or if it is a good design. I've though of the following objects (in a pseudo language): a generic Notification object: class Notification { String $message; Payload $payload; Collection<Recipient> $recipients; } The problem with the following objects is what if I've 1.000.000 recipients ? Even if the Recipient object is very small, it'll take too much memory. I could also create one Notification per recipient, but some platform providers requires me to send it in batch, meaning I need to define one Notification with several Recipients. Each created notification could be stored in a persistent storage like a DB or Redis. Would it be a good it to aggregate this later to make sure it is scalable? On the second step, I need to process this notification. But how could I distinguish the notification to the right platform provider? Should I use an object like MMSNotification extending an abstract Notification? or something like Notification.setType('MMS')? To allow to process a lot of notification at the same time, I think a messaging queue system like RabbitMQ may be the right tool. Is it? It would allow me to queue a lot of notification and have several worker to pop notification and process them. But what if I need to batch the recipients as seen above? Then I imagine a NotificationProcessor object for which I could I add NotificationHandler each NotificationHandler would be in charge to connect the platform provider and perform notification. I can also use an EventManager to allow pluggable behavior. Any feedbacks or ideas? Thanks for giving your time. Note: I'm used to work in PHP and it is likely the language of my choice.

    Read the article

  • Interviews: Going Beyond the Technical Quiz

    - by Tony Davis
    All developers will be familiar with the basic format of a technical interview. After a bout of CV-trawling to gauge basic experience, strengths and weaknesses, the interview turns technical. The whiteboard takes center stage and the challenge is set to design a function or query, or solve what on the face of it might seem a disarmingly simple programming puzzle. Most developers will have experienced those few panic-stricken moments, when one’s mind goes as blank as the whiteboard, before un-popping the marker pen, and hopefully one’s mental functions, to work through the problem. It is a way to probe the candidate’s knowledge of basic programming structures and techniques and to challenge their critical thinking. However, these challenges or puzzles, often devised by some of the smartest brains in the development team, have a tendency to become unnecessarily ‘tricksy’. They often seem somewhat academic in nature. While the candidate straight out of IT school might breeze through the construction of a Markov chain, a candidate with bags of practical experience but less in the way of formal training could become nonplussed. Also, a whiteboard and a marker pen make up only a very small part of the toolkit that a programmer will use in everyday work. I remember vividly my first job interview, for a position as technical editor. It went well, but after the usual CV grilling and technical questions, I was only halfway there. Later, they sat me alongside a team of editors, in front of a computer loaded with MS Word and copy of SQL Server Query Analyzer, and my task was to edit a real chapter for a real SQL Server book that they planned to publish, including validating and testing all the code. It was a tough challenge but I came away with a sound knowledge of the sort of work I’d do, and its context. It makes perfect sense, yet my impression is that many organizations don’t do this. Indeed, it is only relatively recently that Red Gate started to move over to this model for developer interviews. Now, instead of, or perhaps in addition to, the whiteboard challenges, the candidate can expect to sit with their prospective team, in front of Visual Studio, loaded with all the useful tools in the developer’s kit (ReSharper and so on) and asked to, for example, analyze and improve a real piece of software. The same principles should apply when interviewing for a database positon. In addition to the usual questions challenging the candidate’s knowledge of such things as b-trees, object permissions, database recovery models, and so on, sit the candidate down with the other database developers or DBAs. Arm them with a copy of Management Studio, and a few other tools, then challenge them to discover the flaws in a stored procedure, and improve its performance. Or present them with a corrupt database and ask them to get the database back online, and discover the cause of the corruption.

    Read the article

  • sell ccv good and fresh sell cvv all country fullz info

    - by underworld
    ICQ: 640240418 YH: underworld_cvv Mail: [email protected] WELCOME TO MY UNDERWORLD ! I'm is Professional seller,more than 5 years experience,i started work in 2008,i have sold cvv credit card to many customers all over the world. Selling cvv, fullz many country as: Canada,USA,Australia,UK...all And many country in Europe: Fr,Ger,Spain,Ita... I hope we will work together for a long time. Always sell cvv quality with high balance. I have a website but if you want buy cvv good price please contact me. Have Cvv with Bin or Cvv with DOB,VBV if customer claim. List Price Some Cvv (good price for good buyer) -Us: 5$ /1 -Us VBV-DOB : 8$ /1 -Us fullz : 40$ /1 -Us (amex,discover) : 8$ /1 -Ca : 10$ /1 -Ca DOB : 20$ /1 -Ca fullz : 50$ /1 -Ca with bin : 15$ /1 -Au : 10$ /1 -Au DOB : 20$ /1 -Uk : 10$ /1 -Uk DOB-VBV : 20$ /1 -Fr : 15$ /1 -Fr DOB-VBV : 25$ /1 -Ger : 18$ /1 -Ger with DOB : 25$ /1 -Spain : 15$ /1 -Spain Fullz : 40$ /1 -Ita : 15$ /1 -Ita with DOB : 25$ /1 -Japan : 15$ /1 -Japan with DOB : 25$ /1 Cvv random country -Denmark : 25$ /1 -Sweden : 20$ /1 -Switzerland : 20$ /1 -Slovakia : 20$ /1 -Netherlands : 18$ /1 -Mexico : 15 /1 -Middle East : 18$ /1 -New zeland : 18$ /1 -Asia : 15$ /1 -Ireland : 18$ /1 -Belgium : 15$ /1 -Taiwan : 15$ /1 -UAE : 20$ /1 And many country... Some Bins -Us bins: 517805,488893,492536,408181,542432,482880,374355,374372... -Ca bins: 450003,450008,451242,450060,549198,533833,519123,544612... -Uk bins: 4547,5506,5569,5404,5031,4921,5505,5506,4921,4550... -Ger bins: 492942,490762,530127... -Au bins: 543568,450605,494053,450606,456475,521893,519163... -Fr bins: 497847,497831,497841,497849,497820,497825,497833... -And others bins for others country... Format France fullz Nom : di murro Prenom : mariano Adresse : rue des caillettes Ville : Corbeil Essonnes Code Postale : 91100 Telephone : 33672492372 ========== (2eme Tape) ========== Nom de Bank : crédit agricole Nom de Carte Bancaire : di murro mariano Date de naissance : 12 / 02 / 1969 Type de carte : MasterCard Numero de carte : 5131018223855xxx Numero de compte : Date d'expiration : 10 / 2014 CVN : 336 -WARRANTY time is 12 HOURS. Any cvv purchase over 12 hours can not warranty. -If you buy over 30 cvvs, i will sell for you best price. -I will discount for you if you are reseller or you order everyday many on the next day. -I only accept payment money by PerfectMoney (PM) Western Union (WU) and MoneyGram. -I will prove to you that I am the best sellers. And make sure you will enjoy doing business with me. Contact: ICQ: 640240418 YH: underworld_cvv Mail: [email protected]

    Read the article

  • permanently load module

    - by Radu
    I have a Compaq Presario CQ-61 320SQ, I am using Ubuntu 10.04 because after update to 10.10 my mouse and touchpad won't work, network won't work, sound won't work ... (I managed to fix most of them after almost a month of googling, but not all, my 2 Desktops have no problem with 10.10) so I decided to switch back to 10.04, where I have a problem: My broadband speed is very low beacause of the kernel module r8169, I downloaded the good module r8101 and every time the computer boots have a rc.local entry to fix this. Question: Can I load the modul permanently from a specific location. I heard about /etc/modules but there I need the module name, but I have to load it from a specific path (where is the default path for that) Thank you. So I studied the script: It creates the file r8101.ko in /lib/modules/uname -r/kernel/drivers/net so I think as long as nobody will delete that file, and I don't update the kernel, maybe adding r8108 to /etc/modules will work, and add r8169 to blacklist ... I will give it a try. EDIT2: So I added r8101 to /etc/modules and blacklist r8169 to /etc/modprobe.d/blacklist.conf It still uses the old module, lsmod prints: radu@adu:~$ lsmod | grep r8 r8101 67626 0 r8169 34108 0 mii 4381 1 r8169 EDIT: the module is loaded using this script that came with it: #!/bin/sh # invoke insmod with all arguments we got # and use a pathname, as insmod doesn't look in . by default TARGET_PATH=/lib/modules/`uname -r`/kernel/drivers/net echo echo "Check old driver and unload it." check=`lsmod | grep r8169` if [ "$check" != "" ]; then echo "rmmod r8169" /sbin/rmmod r8169 fi check=`lsmod | grep r8101` if [ "$check" != "" ]; then echo "rmmod r8101" /sbin/rmmod r8101 fi echo "Build the module and install" echo "-------------------------------" >> log.txt date 1>>log.txt make all 1>>log.txt || exit 1 module=`ls src/*.ko` module=${module#src/} module=${module%.ko} if [ "$module" == "" ]; then echo "No driver exists!!!" exit 1 elif [ "$module" != "r8169" ]; then if test -e $TARGET_PATH/r8169.ko ; then echo "Backup r8169.ko" if test -e $TARGET_PATH/r8169.bak ; then i=0 while test -e $TARGET_PATH/r8169.bak$i do i=$(($i+1)) done echo "rename r8169.ko to r8169.bak$i" mv $TARGET_PATH/r8169.ko $TARGET_PATH/r8169.bak$i else echo "rename r8169.ko to r8169.bak" mv $TARGET_PATH/r8169.ko $TARGET_PATH/r8169.bak fi fi fi echo "Depending module. Please wait." depmod -a echo "load module $module" modprobe $module echo "Completed." exit 0

    Read the article

  • The importance of Unit Testing in BI

    - by Davide Mauri
    One of the main steps in the process we internally use to develop a BI solution is the implementation of Unit Test of you BI Data. As you may already know, I’ve create a simple (for now) tool that leverages NUnit to allow us to quickly create Unit Testing without having to resort to use Visual Studio Database Professional: http://queryunit.codeplex.com/ Once you have a tool like this one, you can start also to make sure that your BI solution (DWH and CUBE) is not only structurally sound (I mean, the cube or the report gets processed correctly), but you can also check that the logical integrity of your business rules is enforced. For example let’s say that the customer tell you that they will never create an invoice for a specific product-line in 2010 since that product-line is dismissed and will never be sold again. Ok we know that this in theory is true, but a lot of this business rule effectiveness depends on the fact the people does not do a mistake while inserting new orders/invoices and the ERP used implements a check for this business logic. Unfortunately these last two hypotesis are not always true, so you may find yourself really having some invoices for a product line that doesn’t exists anymore. Maybe this kind of situation in future will be solved using Master Data Management but, meanwhile, how you can give and idea of the data quality to your customers? How can you check that logical integrity of the analytical data you produce is exactly what you expect? Well, Unit Testing of a DWH or a CUBE can be a solution. Once you have defined your test suite, by writing SQL and MDX queries that checks that your data is what you expect to be, if you use NUnit (and QueryUnit does), you can then use a tool like NUnit2Report to create a nice HTML report that can be shipped via email to give information of data quality: In addition to that, since NUnit produces an XML file as a result, you can also import it into a SQL Server Database and then monitor the quality of data over time. I’ll be speaking about this approach (and more in general about how to “engineer” a BI solution) at the next European SQL PASS Adaptive BI Best Practices http://www.sqlpass.org/summit/eu2010/Agenda/ProgramSessions/AdaptiveBIBestPratices.aspx I’ll enjoy discussing with you all about this, so see you there! And remember: “if ain't tested it's broken!” (Sorry I don’t remember how said that in first place :-)) Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • How to implement an email unsubscribe system for a site with many kinds of emails?

    - by Mike Liu
    I'm working on a website that features many different types of emails. Users have accounts, and when logged in they have access to a setting page that they can use to customize what types of emails they receive. However, I'd like to also give users an easy way to unsubscribe directly in the emails they receive. I've looked into list unsubscribe headers as well as creating some type of one click link that would unsubscribe a user from that type of email without requiring login or further action. The later would probably require me to break convention and make changes to the database in response to a GET on the link. However, am I incorrect in thinking that either of these would require me to generate and permanently store a unique identifier in my database for every email I ever send, really complicating email delivery? Without that, I'm not sure how I would be able to uniquely identify a user and a type of email in order to change their email preferences, and this identifier would need to be stored forever as a user could have an email sitting in their inbox for a long time before they decide to act on it. Alternatively, I was considering having a no-login page for managing email preferences. In contrast to above where I would need one of these identifiers for each email, this would only need one identifier per user, with no generation or other action required on sending an email. All of these raise security issues, and they could potentially be used by people to tamper with others' email preferences. This could be mitigated somewhat by ensuring that the identifier is really difficult to guess. For the once per user identifier approach, I was considering generating the identifier by passing a user's ID through some type of encryption algorithm, is this a sound approach? For the per-email identifiers, perhaps I could use a user's ID appended to the time. However, even this would not eliminate the problem entirely, as this would really just be security through obscurity, and anyone with the URL could tamper, and in the end the main defense would have to be that most people aren't so bored as to tamper with other people's email preferences. Are there any other alternatives I've missed, or issues or solutions with these that anyone can provide insight on? What are best practices in this area?

    Read the article

  • Ati Radeon HD 3200 Graphics driver - Installation Problem

    - by samufi
    I have a fresh installation of Ubuntu 12.04 x86 and I am trying to install the proprietary driver for my "Radeon HD 3200 Graphics" video card. I know that there are already many threads about this topic, but I did not find a solution for my problem: For the installation I followed exactly these instructions: What is the correct way to install ATI Catalyst Video Drivers in 12.04 LTS? During the process I faced these problems: I executed ~$ debconf libstdc++6 dkms libqtgui4 wget execstack libelfg0 dh-modaliases and got: debconf: DbDriver "passwords" warning: could not open /var/cache/debconf/passwords.dat: Keine Berechtigung Can't exec "libstdc++6": Datei oder Verzeichnis nicht gefunden at /usr/share/perl/5.14/IPC/Open3.pm line 186. open2: exec of libstdc++6 dkms libqtgui4 wget execstack libelfg0 dh-modaliases failed at /usr/share/perl5/Debconf/ConfModule.pm line 59 (translation of the German parts: "Keine Berechtigung" means: "no permission"; "Datei oder Verzeichnis nicht gefunden" means: "File or folder not found") Because I had no idea if it was a big issue, I just continued: ~$ sudo apt-get install ia32-libs There I got: Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut Statusinformationen werden eingelesen... Fertig Paket ia32-libs ist nicht verfügbar, wird aber von einem anderen Paket referenziert. Das kann heißen, dass das Paket fehlt, dass es abgelöst wurde oder nur aus einer anderen Quelle verfügbar ist. E: Paket »ia32-libs« hat keinen Installationskandidaten (Translation: [...] the package ia32-libs is not available but is referenced by an other package [...] E: package »ia32-libs« has no installation candidate) Once more I went on. The next steps worked quite fine. But when I came to the point: ~$ sudo dpkg -i *.deb There I got A popup message, something like there was a problem with a system application but in the terminal no errors were reported, also the packages seemed to be installed. so now the Ati Catalyst Center works amdcccle but fglrxinfo gave me X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 139 (ATIFGLEXTENSION) Minor opcode of failed request: 66 () Serial number of failed request: 13 Current serial number in output stream: 13 So there is something wrong. (Also there is not the possibility to enable these nice graphical features - the reason why I installed the proprietary driver) Because I worked with a completely fresh Installation I don't know how to fix the problem. If anybody could help I would be very tahnkful! =)

    Read the article

  • How I might think like a hacker so that I can anticipate security vulnerabilities in .NET or Java before a hacker hands me my hat [closed]

    - by Matthew Patrick Cashatt
    Premise I make a living developing web-based applications for all form-factors (mobile, tablet, laptop, etc). I make heavy use of SOA, and send and receive most data as JSON objects. Although most of my work is completed on the .NET or Java stacks, I am also recently delving into Node.js. This new stack has got me thinking that I know reasonably well how to secure applications using known facilities of .NET and Java, but I am woefully ignorant when it comes to best practices or, more importantly, the driving motivation behind the best practices. You see, as I gain more prominent clientele, I need to be able to assure them that their applications are secure and, in order to do that, I feel that I should learn to think like a malevolent hacker. What motivates a malevolent hacker: What is their prime mover? What is it that they are most after? Ultimately, the answer is money or notoriety I am sure, but I think it would be good to understand the nuanced motivators that lead to those ends: credit card numbers, damning information, corporate espionage, shutting down a highly visible site, etc. As an extension of question #1--but more specific--what are the things most likely to be seeked out by a hacker in almost any application? Passwords? Financial info? Profile data that will gain them access to other applications a user has joined? Let me be clear here. This is not judgement for or against the aforementioned motivations because that is not the goal of this post. I simply want to know what motivates a hacker regardless of our individual judgement. What are some heuristics followed to accomplish hacker goals? Ultimately specific processes would be great to know; however, in order to think like a hacker, I would really value your comments on the broader heuristics followed. For example: "A hacker always looks first for the low-hanging fruit such as http spoofing" or "In the absence of a CAPTCHA or other deterrent, a hacker will likely run a cracking script against a login prompt and then go from there." Possibly, "A hacker will try and attack a site via Foo (browser) first as it is known for Bar vulnerability. What are the most common hacks employed when following the common heuristics? Specifics here. Http spoofing, password cracking, SQL injection, etc. Disclaimer I am not a hacker, nor am I judging hackers (Heck--I even respect their ingenuity). I simply want to learn how I might think like a hacker so that I may begin to anticipate vulnerabilities before .NET or Java hands me a way to defend against them after the fact.

    Read the article

  • MythTV lost recordings - "No recordings available" and no recording rules either

    - by nimasmi
    I have a c.6 year old mythtv database. I recently upgraded from Ubuntu 10.04 to 12.04. This brought a MythTV upgrade from 0.24 to 0.25, which went well. Today, all my recordings have disappeared. They still exist in the /var/lib/mythtv/recordings folder, and the 'M' key in the Watch Recordings page says that there are 201 recordings available somewhere, but they will not display. See screenshot: (implicit thanks to whomever upvoted this, giving me sufficient reputation to upload images) Changing the filter does not remedy the fact that there is nothing shown in the lists. My Upcoming Recordings screen says that there are no rules set, but my list of previously recorded shows is still there, and has an entry from as recently as 3am today. mythbackend --printsched gives the following: user@box:~$ mythbackend --printsched 2012-09-22 12:59:20.537008 C mythbackend version: fixes/0.25 [v0.25.2-15-g46cab93] www.mythtv.org 2012-09-22 12:59:20.537043 C Qt version: compile: 4.8.1, runtime: 4.8.1 2012-09-22 12:59:20.537048 N Enabled verbose msgs: general 2012-09-22 12:59:20.537076 N Setting Log Level to LOG_INFO 2012-09-22 12:59:20.537142 I Added logging to the console 2012-09-22 12:59:20.537152 I Added database logging to table logging 2012-09-22 12:59:20.537279 N Setting up SIGHUP handler 2012-09-22 12:59:20.537373 N Using runtime prefix = /usr 2012-09-22 12:59:20.537394 N Using configuration directory = /home/user/.mythtv 2012-09-22 12:59:20.537999 I Assumed character encoding: en_GB.UTF-8 2012-09-22 12:59:20.538599 N Empty LocalHostName. 2012-09-22 12:59:20.538610 I Using localhost value of box 2012-09-22 12:59:20.538792 I Testing network connectivity to '192.168.1.2' 2012-09-22 12:59:20.539420 I Starting process manager 2012-09-22 12:59:20.541412 I Starting IO manager (read) 2012-09-22 12:59:20.541715 I Starting IO manager (write) 2012-09-22 12:59:20.541836 I Starting process signal handler 2012-09-22 12:59:20.684497 N Setting QT default locale to EN_GB 2012-09-22 12:59:20.684694 I Current locale EN_GB 2012-09-22 12:59:20.684813 N Reading locale defaults from /usr/share/mythtv//locales/en_gb.xml 2012-09-22 12:59:20.697623 I New static DB connectionDataDirectCon 2012-09-22 12:59:20.704769 I MythCoreContext: Connecting to backend server: 192.168.1.2:6543 (try 1 of 1) Calculating Schedule from database. Inputs, Card IDs, and Conflict info may be invalid if you have multiple tuners. 2012-09-22 12:59:27.710538 E MythSocket(21dfcd0:14): readStringList: Error, timed out after 7000 ms. 2012-09-22 12:59:27.710592 C Protocol version check failure. The response to MYTH_PROTO_VERSION was empty. This happens when the backend is too busy to respond, or has deadlocked in due to bugs or hardware failure. Things I have tried so far: restart the backend restart the frontend run mythtv-setup and check database passwords and IP addresses change the frontend setting for backend IP from localhost to 192.168.1.2 (the backend/frontend's IP) run optimize_mythdb.pl Other suggestions appreciated.

    Read the article

  • How to create wifihotspot in ubuntu 10.04 LTS

    - by aspdeepak
    I am using ubuntu 10.04 LTS in my lenovo laptop and have a android ICS device. I want to create a wifi-hotspot in ubuntu, which I can later use for connecting android device. I need this setup for capturing the packets from android device and later analysing them using wireshark in my ubuntu. I tried to create a new hotspot using "Create a new wireless Network" wizard from network manager applet, but for some reason the following happens. It breaks the existing internet connection(either the WLAN, or ethernet) Its not visible in the list of available WIFI hotspots in the android device. My Chipset information 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LF Gigabit Network Connection (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection 15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff) 15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11) 15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11) Supported interface modes: * IBSS * managed * monitor

    Read the article

  • A Slice of Raspberry Pi

    - by Phil Factor
    Guest editorial for the ITPro/SysAdmin newsletter The Raspberry Pi Foundation has done a superb design job on their new $35 network-enabled Linux computer. This tiny machine, incorporating an ARM processor on a Broadcom BCM2835 multimedia chip, aims to put the fun back into learning computing. The public response has been overwhelmingly positive.Note that aim: "…to put the fun back". Education in Information Technology is in dire straits. It always has been, but seems to have deteriorated further still, even in the face of improved provision of equipment.In many countries, the government controls the curriculum. It predicted a shortage in office-based IT skills, and so geared the ICT curriculum toward mind-numbing training in word-processing and spreadsheet skills. Instead, the shortage has turned out to be in people with an engineering-mindset, who can solve problems with whatever technologies are available and learn new techniques quickly, in a rapidly-changing field.In retrospect, the assumption that specific training was required rather than an education was an idiotic response to the arrival of mainstream information technology. As a result, ICT became a disaster area, which discouraged a generation of youngsters from a career in IT, and thereby led directly to the shortage of people with the skills that are required to exploit the potential of Information Technology..Raspberry Pi aims to reverse the trend. This is a rig that is geared to fast graphics in high resolution. It is no toy. It should be a superb games machine. However, the use of Fedora, Debian, or Arch Linux ARM shows the more serious educational intent behind the Foundation's work. It looks like it will even do some office work too!So, get hold of any power supply that provides a 5VDC source at the required 700mA; an old Blackberry charger will do or, alternatively, it will run off four AA cells. You'll need a USB hub to support the mouse and keyboard, and maybe a hard drive. You'll want a DVI monitor (with audio out) or TV (sound and video). You'll also need to be able to cope with wired Ethernet 10/100, if you want networking.With this lot assembled, stick the paraphernalia on the back of the HDTV with Blu Tack, get a nice keyboard, and you have a classy Linux-based home computer. The major cost is in the T.V and the keyboard. If you're not already writing software for this platform, then maybe, at a time when some countries are talking of orders in the millions, you should consider it.

    Read the article

  • sell skimmed dump+pin([email protected])wu transfer,bank transfer,paypal+mailpass

    - by bestseller
    http://megareserve.blogspot.com///////// [email protected]////gmail:[email protected] Sell, Cvv, Bank Logins, Tracks, PayPal, Transfers, WU, Credit Cards, Card, Hacks, Citi, Boa, Visa, MasterCard, Amex, American Express, Make Money Fast, Stolen, Cc, C++, Adder, Western, Union, Banks, Of, America, Wellsfargo, Liberty, Reserve, Gram, Mg, LR, AlertPay ..PAYMENT METHOD LIBERTYRESERVE AND WESTERNUNION ONLY........ Ccv EU is $ 6 per ccv (Visa + Master) Ccv EU is $ 7 per ccv (Amex + Discover) Ccv Au is $ 6 per ccv Ccv Italy is 15 $ per cc sweden 12$ spain 10$ france 12$ Ccv US is $ 1.5 per ccv (Visa) Ccv US is $ 2 per ccv (master) Ccv US is $ 3 per ccv (Amex + Discover) Ccv UK is $ 5 per ccv (Visa + Master) Ccv UK is $ 6 per ccv (Amex + swith) Ccv Ca is $ 6 per ccv (Visa+ Master) Ccv Ca is $ 9 per ccv (Visa Business + Visa Gold) Ccv Germany is 14$ Per Ccv Ccv DOB with US is 15 $ per ccv Ccv DOB with UK is 19 $ per ccv Ccv DOB + BIN with UK 25$ per ccv Ccv US full info is 40 $ per ccv Ccv UK full info is 60 $ per ccv 1 Uk check bins= 12.5$/1cvv 1 Sock live = 1$/1sock live 5day yahoo:[email protected] gmail:[email protected] Balance In Chase:.........70K To 155K ========300$ Balance In Wachovia:.........24K To 80K==========180$ Balance In Boa..........75K To 450K==========400$ Balance In Credit Union:.........Any Amount:=========420$ Balance In Hallifax..........ANY AMOUNT=========420$ Balance In Compass..........ANY AMOUNT=========400$ Balance In Wellsfargo..........ANY AMOUNT=========400$ Balance In Barclays..........80K To 100K=========550$ Balance In Abbey:.........82K ==========650$ Balance in Hsbc:.........50K========650$ and more 1 Paypal with pass email = 50$/paypal 1 Paypal don't have pass email = 20$/Paypal 1 Banklogin us or uk (personel)= 550$ yahoo :[email protected] gmail :[email protected] Track 1/2 Visa Classic, MasterCard Standart US - 13$ UK - 17$ EU - 24$ AU - 26$ Track 1/2 Visa Gold | Platinum | Business | Signature, MasterCard Gold | Platinum US - 17$ UK - 20$ EU - 28$ AU - 30$ Bank transfer Balance 71.000$ CITIBANK SOUTH DAKOTA, N.A. Balance 65.000$ Wachovia: 76.000$ Abbey: 65.000£ Hsbc : 87.000$ Hallifax : 97.000£ Barclays: 110.000£ AHLI UNITED BANK --- 80.000£ LLOYDSTSB ---------- 100.000£ BANK OF SCOTLAND --- 123.000£ BOA ----------210.000$ UBS ---------- 152.000$ RBC BANK ------ 245.000$ BANK OF CANADA -------- 78.000$ BDC ---------- 281.000$ BANK LAURENTIENNE ----- 241.000$ please no test yahoo: [email protected] gmail: [email protected] website ; http://megareserve.blogspot.com Prices For Bin and Its List: 5434, 5419, 4670,374288,545140,454634,3791 with d.o.b,4049,4462,4921.4929.46274547,5506,5569,5404,5031,4921, 5505,5506,4921,4550 ,4552,4988,5186,4462,4543,4567 ,4539,5301,4929,5521 , 4291,5051,4975,5413 5255 4563,4547 4505,4563 5413 5255,5521,5506,4921,4929,54609 7,5609,54609,4543, 4975,5432,5187 ,4973,4627,4049,4779,426565,55 05, 5549, 5404, 5434, 5419, 4670,456730,541361, 451105,4670,5505, 5549, 5404, UK Nomall NO BINS(Serial) with DOB is :10$ UK with BINS(Serial) with DOB is :15$ UK Nomall no BINS(Serial) no DOB is: 6$ UK with BINS(Serial) is :12$ Please do not request : cc for TEST and FREE. DON'T CONTACT ME IF YOU NOT READY NEED TO BUY .

    Read the article

  • Beat detection and FFT

    - by Quincy
    So I am working on a platformer game which includes music with beat detection. I am currently using a simple if the energy that is stored in the history buffer is smaller then the current energy there is a beat. The problem with this is that ofcourse if you use songs like rock songs where you have a pretty steady amplitude this isn't going to work. So I looked further and found algorithms splitting the sound into multiple bands using FFT. I then found this : http://en.literateprograms.org/Cooley-Tukey_FFT_algorithm_(C) The only problem I'm having is that I am quite new to audio and I have no idea how to use that to split the signal up into multiple signals. So my question is : How do you use a FFT to split a signal into multiple bands ? Also for the guys interested, this is my algorithm in c# : // C = threshold, N = size of history buffer / 1024 public void PlaceBeatMarkers(float C, int N) { List<float> instantEnergyList = new List<float>(); short[] samples = soundData.Samples; float timePerSample = 1 / (float)soundData.SampleRate; int sampleIndex = 0; int nextSamples = 1024; // Calculate instant energy for every 1024 samples. while (sampleIndex + nextSamples < samples.Length) { float instantEnergy = 0; for (int i = 0; i < nextSamples; i++) { instantEnergy += Math.Abs((float)samples[sampleIndex + i]); } instantEnergy /= nextSamples; instantEnergyList.Add(instantEnergy); if(sampleIndex + nextSamples >= samples.Length) nextSamples = samples.Length - sampleIndex - 1; sampleIndex += nextSamples; } int index = N; int numInBuffer = index; float historyBuffer = 0; //Fill the history buffer with n * instant energy for (int i = 0; i < index; i++) { historyBuffer += instantEnergyList[i]; } // If instantEnergy / samples in buffer < instantEnergy for the next sample then add beatmarker. while (index + 1 < instantEnergyList.Count) { if(instantEnergyList[index + 1] > (historyBuffer / numInBuffer) * C) beatMarkers.Add((index + 1) * 1024 * timePerSample); historyBuffer -= instantEnergyList[index - numInBuffer]; historyBuffer += instantEnergyList[index + 1]; index++; } }

    Read the article

  • SQL – Contest to Get The Date – Win USD 50 Amazon Gift Cards and Cool Gift

    - by Pinal Dave
    If you are a regular reader of this blog – you will find no issue at all in resolving this puzzle. This contest is based on my experience with NuoDB. If you are not familiar with NuoDB, here are few pointers for you. Step by Step Guide to Download and Install NuoDB – Getting Started with NuoDB Quick Start with Admin Sections of NuoDB – Manage NuoDB Database Quick Start with Explorer Sections of NuoDB – Query NuoDB Database In today’s contest you have to answer following questions: Q 1: Precision of NOW() What is the precision of the NuoDB’s NOW() function, which returns current date time? Hint: Run following script on NuoDB Console Explorer section: SELECT NOW() AS CurrentTime FROM dual; Here is the image. I have masked the area where the time precision is displayed. Q 2: Executing Date and Time Script When I execute following script - SELECT 'today' AS Today, 'tomorrow' AS Tomorrow, 'yesterday' AS Yesterday FROM dual; I will get the following result:   NOW – What will be the answer when we execute following script? and WHY? SELECT CAST('today' AS DATE) AS Today, CAST('tomorrow' AS DATE) AS Tomorrow, CAST('yesterday'AS DATE) AS Yesterday FROM dual; HINT: Install NuoDB (it takes 90 seconds). Prizes: 2 Amazon Gifts 2 Limited Edition Hoodies (US resident only)   Rules: Please leave an answer in the comments section below. You must answer both the questions together in a single comment. US resident who wants to qualify to win NuoDB apparel please mention your country in the comment. You can resubmit your answer multiple times, the latest entry will be considered valid. Last day to participate in the puzzle is June 24, 2013. All valid answer will be kept hidden till June 24, 2013. The winner will be announced on June 25, 2013. Two Winners will get USD 25 worth Amazon Gift Card. (Total Value = 25 x 2 = 50 USD) The winner will be selected using a random algorithm from all the valid answers. Anybody with a valid email address can take part in the contest. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

    Read the article

  • Wireless Problem on HP Pavillion G6

    - by user47954
    I have a broadcom wireless card in my laptop and the wireless is not working correctly. right in front of the router the wireless signal is 70% and across the room it barely works and in another room it disconnects. i have the drivers and everything. i am running ubuntu 11.10 64bit.it works perfectly in windows 7. can anyone help! 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1705] 00:01.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:9649] 00:01.1 Audio device [0403]: ATI Technologies Inc Device [1002:1714] Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:1709] Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] Device [1022:7804] Kernel driver in use: ahci Kernel modules: ahci 00:12.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) Kernel driver in use: ohci_hcd 00:12.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) Kernel driver in use: ehci_hcd 00:13.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] Device [1022:780b] (rev 13) Kernel modules: i2c-piix4 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] Device [1022:780d] (rev 01) Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] Device [1022:780e] (rev 11) 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:780f] (rev 40) 00:15.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:43a0] Kernel driver in use: pcieport Kernel modules: shpchp 00:15.1 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:43a1] Kernel driver in use: pcieport Kernel modules: shpchp 00:15.2 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:43a2] Kernel driver in use: pcieport Kernel modules: shpchp 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1700] (rev 43) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1701] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1702] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1703] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1704] 00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1718] 00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1716] 00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1719] 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) Kernel driver in use: r8169 Kernel modules: r8169 07:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4727] (rev 01) Kernel driver in use: wl Kernel modules: wl 08:00.0 Class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5209] (rev 01)

    Read the article

  • Networking Guidelines

    - by ACShorten
    One of the things I have noticed in my years in IT is the changes in networking. In the past networking was pretty simple with the host name and name resolution (via DNS) being pretty simple. Some sites still use this simple networking setup. These days, more complex name resolution, proxies, firewalls, demarcation nd virtualization, can make networking more complex. This can cause issues when installing products with in built networking that can frustrate even seasoned veterans. I have put together a few basic guidelines to hopefully help along with product installation and getting a product to operate in a somewhat complex network setup. All the components of the product (including the infrastructure) need to communicate via a network (even it is within a local machine/host). Ensure any host names referred to within configuration files are accessible via your networking setup. This may mean defining the hosts to the machines, to the DNS for name resolution and even your firewall to allow machines to communicate within your network. Make sure the ports used for any of the infrastructure are accessible (even through your firewall) and are unique within the host. Host duplication can cause the product to fail on startup as the port is already in use. If there are still issues, consider using localhost as your host name. I have used this in so many situations that I tend to use it now as a default anytime I install anything myself. Most Oracle products suggest to use localhost when using dynamic host or dynamic IP addresses and this is no different for the Oracle Utilities Application Framework. If you do use localhost then installing a Loopback Adapter for the operating system is recommended to force networking to a minimum. Usually localhost resolves to 127.0.0.1. When using multiple network connections, especially in a virtualized environment, ensure the host and ports used are relevent for the network cards you have setup. One of the common issues is finding the product is using a vierualized network card only to find that it is not setup for correct networking. If you are using the batch component, do not forget to ensure that the multicast protocol is enabled on your host and that the multicast address and port number specified are valid and accessible from all machines in the batch cluster (if clustering used). The same advice applies if you are using unicast where each host/port combination should be accessible. Hopefully these basic networking recommendations will help minimize any networking issues you might encounter.

    Read the article

  • How to shoot yourself in the foot (DO NOT Read in the office)

    - by TATWORTH
    Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/21/how-to-shoot-yourself-in-the-foot-do-not-read.aspxLet me make it absolutely clear - the following is:merely collated by your Geek from http://www.codeproject.com/Lounge.aspx?msg=3917012#xx3917012xxvery, very very funny so you read it in the presence of others at your own riskso here is the list - you have been warned!C You shoot yourself in the foot.   C++ You accidently create a dozen instances of yourself and shoot them all in the foot. Providing emergency medical assistance is impossible since you can't tell which are bitwise copies and which are just pointing at others and saying "That's me, over there."   FORTRAN You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you have no exception-handling facility.   Modula-2 After realizing that you can't actually accomplish anything in this language, you shoot yourself in the head.   COBOL USEing a COLT 45 HANDGUN, AIM gun at LEG.FOOT, THEN place ARM.HAND.FINGER on HANDGUN.TRIGGER and SQUEEZE. THEN return HANDGUN to HOLSTER. CHECK whether shoelace needs to be retied.   Lisp You shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds...   BASIC Shoot yourself in the foot with a water pistol. On big systems, continue until entire lower body is waterlogged.   Forth Foot yourself in the shoot.   APL You shoot yourself in the foot; then spend all day figuring out how to do it in fewer characters.   Pascal The compiler won't let you shoot yourself in the foot.   Snobol If you succeed, shoot yourself in the left foot. If you fail, shoot yourself in the right foot.   HyperTalk Put the first bullet of the gun into foot left of leg of you. Answer the result.   Prolog You tell your program you want to be shot in the foot. The program figures out how to do it, but the syntax doesn't allow it to explain.   370 JCL You send your foot down to MIS with a 4000-page document explaining how you want it to be shot. Three years later, your foot comes back deep-fried.   FORTRAN-77 You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you still can't do exception-processing.   Modula-2 (alternative) You perform a shooting on what might be currently a foot with what might be currently a bullet shot by what might currently be a gun.   BASIC (compiled) You shoot yourself in the foot with a BB using a SCUD missile launcher.   Visual Basic You'll really only appear to have shot yourself in the foot, but you'll have so much fun doing it that you won't care.   Forth (alternative) BULLET DUP3 * GUN LOAD FOOT AIM TRIGGER PULL BANG! EMIT DEAD IF DROP ROT THEN (This takes about five bytes of memory, executes in two to ten clock cycles on any processor and can be used to replace any existing function of the language as well as in any future words). (Welcome to bottom up programming - where you, too, can perform compiler pre-processing instead of writing code)   APL (alternative) You hear a gunshot and there's a hole in your foot, but you don't remember enough linear algebra to understand what happened. or @#&^$%&%^ foot   Pascal (alternative) Same as Modula-2 except that the bullet is not the right type for the gun and your hand is blown off.   Snobol (alternative) You grab your foot with your hand, then rewrite your hand to be a bullet. The act of shooting the original foot then changes your hand/bullet into yet another foot (a left foot).   Prolog (alternative) You attempt to shoot yourself in the foot, but the bullet, failing to find its mark, backtracks to the gun, which then explodes in your face.   COMAL You attempt to shoot yourself in the foot with a water pistol, but the bore is clogged, and the pressure build-up blows apart both the pistol and your hand. or draw_pistol aim_at_foot(left) pull_trigger hop(swearing)   Scheme As Lisp, but none of the other appendages are aware of this happening.   Algol You shoot yourself in the foot with a musket. The musket is aesthetically fascinating and the wound baffles the adolescent medic in the emergency room.   Ada If you are dumb enough to actually use this language, the United States Department of Defense will kidnap you, stand you up in front of a firing squad and tell the soldiers, "Shoot at the feet." or The Department of Defense shoots you in the foot after offering you a blindfold and a last cigarette. or After correctly packaging your foot, you attempt to concurrently load the gun, pull the trigger, scream and shoot yourself in the foot. When you try, however, you discover that your foot is of the wrong type. or After correctly packing your foot, you attempt to concurrently load the gun, pull the trigger, scream, and confidently aim at your foot knowing it is safe. However the cordite in the round does an Unchecked Conversion, fires and shoots you in the foot anyway.   Eiffel   You create a GUN object, two FOOT objects and a BULLET object. The GUN passes both the FOOT objects a reference to the BULLET. The FOOT objects increment their hole counts and forget about the BULLET. A little demon then drives a garbage truck over your feet and grabs the bullet (both of it) on the way. Smalltalk You spend so much time playing with the graphics and windowing system that your boss shoots you in the foot, takes away your workstation and makes you develop in COBOL on a character terminal. or You send the message shoot to gun, with selectors bullet and myFoot. A window pops up saying Gunpowder doesNotUnderstand: spark. After several fruitless hours spent browsing the methods for Trigger, FiringPin and IdealGas, you take the easy way out and create ShotFoot, a subclass of Foot with an additional instance variable bulletHole. Object Oriented Pascal You perform a shooting on what might currently be a foot with what might currently be a bullet fired from what might currently be a gun.   PL/I You consume all available system resources, including all the offline bullets. The Data Processing & Payroll Department doubles its size, triples its budget, acquires four new mainframes and drops the original one on your foot. Postscript foot bullets 6 locate loadgun aim gun shoot showpage or It takes the bullet ten minutes to travel from the gun to your foot, by which time you're long since gone out to lunch. The text comes out great, though.   PERL You stab yourself in the foot repeatedly with an incredibly large and very heavy Swiss Army knife. or You pick up the gun and begin to load it. The gun and your foot begin to grow to huge proportions and the world around you slows down, until the gun fires. It makes a tiny hole, which you don't feel. Assembly Language You crash the OS and overwrite the root disk. The system administrator arrives and shoots you in the foot. After a moment of contemplation, the administrator shoots himself in the foot and then hops around the room rabidly shooting at everyone in sight. or You try to shoot yourself in the foot only to discover you must first reinvent the gun, the bullet, and your foot.or The bullet travels to your foot instantly, but it took you three weeks to load the round and aim the gun.   BCPL You shoot yourself somewhere in the leg -- you can't get any finer resolution than that. Concurrent Euclid You shoot yourself in somebody else's foot.   Motif You spend days writing a UIL description of your foot, the trajectory, the bullet and the intricate scrollwork on the ivory handles of the gun. When you finally get around to pulling the trigger, the gun jams.   Powerbuilder While attempting to load the gun you discover that the LoadGun system function is buggy; as a work around you tape the bullet to the outside of the gun and unsuccessfully attempt to fire it with a nail. In frustration you club your foot with the butt of the gun and explain to your client that this approximates the functionality of shooting yourself in the foot and that the next version of Powerbuilder will fix it.   Standard ML By the time you get your code to typecheck, you're using a shoot to foot yourself in the gun.   MUMPS You shoot 583149 AK-47 teflon-tipped, hollow-point, armour-piercing bullets into even-numbered toes on odd-numbered feet of everyone in the building -- with one line of code. Three weeks later you shoot yourself in the head rather than try to modify that line.   Java You locate the Gun class, but discover that the Bullet class is abstract, so you extend it and write the missing part of the implementation. Then you implement the ShootAble interface for your foot, and recompile the Foot class. The interface lets the bullet call the doDamage method on the Foot, so the Foot can damage itself in the most effective way. Now you run the program, and call the doShoot method on the instance of the Gun class. First the Gun creates an instance of Bullet, which calls the doFire method on the Gun. The Gun calls the hit(Bullet) method on the Foot, and the instance of Bullet is passed to the Foot. But this causes an IllegalHitByBullet exception to be thrown, and you die.   Unix You shoot yourself in the foot or % ls foot.c foot.h foot.o toe.c toe.o % rm * .o rm: .o: No such file or directory % ls %   370 JCL (alternative) You shoot yourself in the head just thinking about it.   DOS JCL You first find the building you're in in the phone book, then find your office number in the corporate phone book. Then you have to write this down, then describe, in cubits, your exact location, in relation to the door (right hand side thereof). Then you need to write down the location of the gun (loading it is a proprietary utility), then you load it, and the COBOL program, and run them, and, with luck, it may be run tonight.   VMS   $ MOUNT/DENSITY=.45/LABEL=BULLET/MESSAGE="BYE" BULLET::BULLET$GUN SYS$BULLET $ SET GUN/LOAD/SAFETY=OFF/SIGHT=NONE/HAND=LEFT/CHAMBER=1/ACTION=AUTOMATIC/ LOG/ALL/FULL SYS$GUN_3$DUA3:[000000]GUN.GNU $ SHOOT/LOG/AUTO SYS$GUN SYS$SYSTEM:[FOOT]FOOT.FOOT   %DCL-W-ACTIMAGE, error activating image GUN -CLI-E-IMGNAME, image file $3$DUA240:[GUN]GUN.EXE;1 -IMGACT-F-NOTNATIVE, image is not an OpenVMS Alpha AXP image or %SYS-F-FTSHT, foot shot (fifty lines of traceback omitted) sh,csh, etc You can't remember the syntax for anything, so you spend five hours reading manual pages, then your foot falls asleep. You shoot the computer and switch to C.   Apple System 7 Double click the gun icon and a window giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small bomb appears with note "Error of Type 1 has occurred."   Windows 3.1 Double click the gun icon and wait. Eventually a window opens giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small box appears with note "Unable to open Shoot.dll, check that path is correct."   Windows 95 Your gun is not compatible with this OS and you must buy an upgrade and install it before you can continue. Then you will be informed that you don't have enough memory.   CP/M I remember when shooting yourself in the foot with a BB gun was a big deal.   DOS You finally found the gun, but can't locate the file with the foot for the life of you.   MSDOS You shoot yourself in the foot, but can unshoot yourself with add-on software.   Access You try to point the gun at your foot, but it shoots holes in all your Borland distribution diskettes instead.   Paradox Not only can you shoot yourself in the foot, your users can too.   dBase You squeeze the trigger, but the bullet moves so slowly that by the time your foot feels the pain, you've forgotten why you shot yourself anyway. or You buy a gun. Bullets are only available from another company and are promised to work so you buy them. Then you find out that the next version of the gun is the one scheduled to actually shoot bullets.   DBase IV, V1.0 You pull the trigger, but it turns out that the gun was a poorly designed hand grenade and the whole building blows up.   SQL You cut your foot off, send it out to a service bureau and when it returns, it has a hole in it but will no longer fit the attachment at the end of your leg. or Insert into Foot Select Bullet >From Gun.Hand Where Chamber = 'LOADED' And Trigger = 'PULLED'   Clipper You grab a bullet, get ready to insert it in the gun so that you can shoot yourself in the foot and discover that the gun that the bullets fits has not yet been built, but should be arriving in the mail _REAL_SOON_NOW_. Oracle The menus for coding foot_shooting have not been implemented yet and you can't do foot shooting in SQL.   English You put your foot in your mouth, then bite it off. (For those who don't know, English is a McDonnell Douglas/PICK query language which allegedly requires 110% of system resources to run happily.) Revelation [an implementation of the PICK Operating System] You'll be able to shoot yourself in the foot just as soon as you figure out what all these bullets are for.   FlagShip Starting at the top of your head, you aim the gun at yourself repeatedly until, half an hour later, the gun is finally pointing at your foot and you pull the trigger. A new foot with a hole in it appears but you can't work out how to get rid of the old one and your gun doesn't work anymore.   FidoNet You put your foot in your mouth, then echo it internationally.   PicoSpan [a UNIX-based computer conferencing system] You can't shoot yourself in the foot because you're not a host. or (host variation) Whenever you shoot yourself in the foot, someone opens a topic in policy about it.   Internet You put your foot in your mouth, shoot it, then spam the bullet so that everybody gets shot in the foot.   troff rmtroff -ms -Hdrwp | lpr -Pwp2 & .*place bullet in footer .B .NR FT +3i .in 4 .bu Shoot! .br .sp .in -4 .br .bp NR HD -2i .*   Genetic Algorithms You create 10,000 strings describing the best way to shoot yourself in the foot. By the time the program produces the optimal solution, humans have evolved wings and the problem is moot.   CSP (Communicating Sequential Processes) You only fail to shoot everything that isn't your foot.   MS-SQL Server MS-SQL Server’s gun comes pre-loaded with an unlimited supply of Teflon coated bullets, and it only has two discernible features: the muzzle and the trigger. If that wasn't enough, MS-SQL Server also puts the gun in your hand, applies local anesthetic to the skin of your forefinger and stitches it to the gun's trigger. Meanwhile, another process has set up a spinal block to numb your lower body. It will then proceeded to surgically remove your foot, cryogenically freeze it for preservation, and attach it to the muzzle of the gun so that no matter where you aim, you will shoot your foot. In order to avoid shooting yourself in the foot, you need to unstitch your trigger finger, remove your foot from the muzzle of the gun, and have it surgically reattached. Then you probably want to get some crutches and go out to buy a book on SQL Server Performance Tuning.   Sybase Sybase's gun requires assembly, and you need to go out and purchase your own clip and bullets to load the gun. Assembly is complicated by the fact that Sybase has hidden the gun behind a big stack of reference manuals, but it hasn't told you where that stack is. While you were off finding the gun, assembling it, buying bullets, etc., Sybase was also busy surgically removing your foot and cryogenically freezing it for preservation. Instead of attaching it to the muzzle of the gun, though, it packed your foot on dry ice and sent it UPS-Ground to an unnamed hookah bar somewhere in the middle east. In order to shoot your foot, you must modify your gun with a GPS system for targeting and hire some guy named "Indy" to find the hookah bar and wire the coordinates back to you. By this time, you've probably become so daunted at the tasks stand between you and shooting your foot that you hire a guy who's read all the books on Sybase to help you shoot your foot. If you're lucky, he'll be smart enough both to find your foot and to stop you from shooting it.   Magic software You spend 1 week looking up the correct syntax for GUN. When you find it, you realise that GUN will not let you shoot in your own foot. It will allow you to shoot almost anything but your foot. You then decide to build your own gun. You can't use the standard barrel since this will only allow for standard bullets, which will not fire if the barrel is pointed at your foot. After four weeks, you have created your own custom gun. It blows up in your hand without warning, because you failed to initialise the safety catch and it doesn't know whether the initial state is "0", 0, NULL, "ZERO", 0.0, 0,0, "0.0", or "0,00". You fix the problem with your remaining hand by nesting 12 safety catches, and then decide to build the gun without safety catch. You then shoot the management and retire to a happy life where you code in languages that will allow you to shoot your foot in under 10 days.FirefoxLets you shoot yourself in as many feet as you'd like, while using multiple great addons! IEA moving target in terms of standard ammunition size and doesn't always work properly with non-Microsoft ammunition, so sometimes you shoot something other than your foot. However, it's the corporate world's standard foot-shooting apparatus. Hackers seem to enjoy rigging websites up to trigger cascading foot-shooting failures. Windows 98 About the same as Windows 95 in terms of overall bullet capacity and triggering mechanisms. Includes updated DirectShot API. A new version was released later on to support USB guns, Windows 98 SE.WPF:You get your baseball glove and a ball and you head out to your backyard, where you throw balls to your pitchback. Then your unkempt-haired-cargo-shorts-and-sandals-with-white-socks-wearing neighbor uses XAML to sculpt your arm into a gun, the ball into a bullet and the pitchback into your foot. By now, however, only the neighbor can get it to work and he's only around from 6:30 PM - 3:30 AM. LOGO: You very carefully lay out the trajectory of the bullet. Then you start the gun, which fires very slowly. You walk precisely to the point where the bullet will travel and wait, but just before it gets to you, your class time is up and one of the other kids has already used the system to hack into Sony's PS3 network. Flash: Someone has designed a beautiful-looking gun that anyone can shoot their feet with for free. It weighs six hundred pounds. All kinds of people are shooting themselves in the feet, and sending the link to everyone else so that they can too. That is, except for the criminals, who are all stealing iOS devices that the gun won't work with.APL: Its (mostly) all greek to me. Lisp: Place ((gun in ((hand sight (foot then shoot))))) (Lots of Insipid Stupid Parentheses)Apple OS/X and iOS Once a year, Steve Jobs returns from sick leave to tell millions of unwavering fans how they will be able to shoot themselves in the foot differently this year. They retweet and blog about it ad nauseam, and wait in line to be the first to experience "shoot different".Windows ME Usually fails, even at shooting you in the foot. Yo dawg, I heard you like shooting yourself in the foot. So I put a gun in your gun, so you can shoot yourself in the foot while you shoot yourself in the foot. (Okay, I'm not especially proud of this joke.) Windows 2000 Now you really do have to log in, before you are allowed to shoot yourself in the foot.Windows XPYou thought you learned your lesson: Don't use Windows ME. Then, along came this new creature, built on top of Windows NT! So you spend the next couple days installing antivirus software, patches and service packs, just so you can get that driver to install, and then proceed to shoot yourself in the foot. Windows Vista Newer! Glossier! Shootier! Windows 7 The bullets come out a lot smoother. Active Directory Each bullet now has an attached Bullet Identifier, and can be uniquely identified. Policies can be applied to dictate fragmentation, and the gun will occasionally have a confusing delay after the trigger has been pulled. PythonYou try to use import foot; foot.shoot() only to realize that's only available in 3.0, to which you can't yet upgrade from 2.7 because of all those extension libs lacking support. Solaris Shoots best when used on SPARC hardware, but still runs the trigger GUI under Java. After weeks of learning the appropriate STOP command to prevent the trigger from automatically being pressed on boot, you think you've got it under control. Then the one time you ever use dtrace, it hits a bug that fires the gun. MySQL The feature that allows you to shoot yourself in the foot has been in development for about 6 years, and they are adding it into the next version, which is coming out REAL SOON NOW, promise! But you can always check it out of source control and try it yourself (just not in any environment where data integrity is important because it will probably explode.) PostgreSQLAllows you to have a smug look on your face while you shoot yourself in the foot, because those MySQL guys STILL don't have that feature. NoSQL Barrel? Who needs a barrel? Just put the bullet on your foot, and strike it with a hammer. See? It's so much simpler and more efficient that way. You can even strike multiple bullets in one swing if you swing with a good enough arc, because hammers are easy to use. Getting them to synchronize is a little difficult, though.Eclipse There are about a dozen different packages for shooting yourself in the foot, with weird interdependencies on outdated components. Once you finally navigate the morass and get one installed, you then have something to look at while you shoot yourself in the foot with that package: You can watch the screen redraw.Outlook Makes it really easy to let everyone know you shot yourself in the foot!Shooting yourself in the foot using delegates.You really need to shoot yourself in the foot but you hate firearms (you don't want any dependency on the specifics of shooting) so you delegate it to somebody else. You don't care how it is done as long is shooting your foot. You can do it asynchronously in case you know you may faint so you are called back/slapped in the face by your shooter/friend (or background worker) when everything is done.C#You prepare the gun and the bullet, carefully modeling all of the physics of a bullet traveling through a foot. Just before you're about to pull the trigger, you stumble on System.Windows.BodyParts.Foot.ShootAt(System.Windows.Firearms.IGun gun) in the extended framework, realize you just wasted the entire afternoon, and shoot yourself in the head.PHP<?phprequire("foot_safety_check.php");?><!DOCTYPE HTML><html><head> <!--Lower!--><title>Shooting me in the foot</title></head> <body> <!--LOWER!!!--><leg> <!--OK, I made this one up...--><footer><?php echo (dungSift($_SERVER['HTTP_USER_AGENT'], "ie"))?("Your foot is safe, but you might want to wear a hard hat!"):("<div class=\"shot\">BANG!</div>"); ?></footer></leg> </body> </html>

    Read the article

  • Enhance Your Gmail Account in Chrome

    - by Asian Angel
    Are you tired of items like the Chat and Invite Boxes cluttering up your Gmail account? Then join us as we look at the Better Gmail extension for Google Chrome. Before Here are some examples of items that you may be tired of looking at in your Gmail account such as the “Footer” below your “Inbox”, the “Chat Box”, and the “Invitation Box”. Perhaps you would also like to have the “New Window, Print all, & Create a document Commands” moved elsewhere. And of course there is everyone’s “favorite” sponsored links… Time to do some cleaning up and reorganizing. Better Gmail in Action As soon as you have installed Better Gmail a new tab will automatically open and present you with the available options. Place a “checkmark” in the box for each option that you would like activated and click on “Save” when finished. Note: The final option entry is a tie-in with two other “linked” extensions (Folders4Gmail & HTML Signature) while the middle listing is a link to an article for disabling Google Buzz. Once you have saved your changes in the “Options” you will be prompted to refresh your Gmail tab to see the changes. Going back to our “Inbox Area” everything looks so much more streamlined and clean now. Goodbye clutter! The “New Window, Print all, & Create a document Commands” definitely look a lot nicer as a small toolbar above our e-mail. And the right side…you can see for yourself just how much better that looks. No more distractions there to bother you as you read your e-mail. Conclusion If you have been wanting to get rid of the undesirable elements visible in your Gmail account then hurry over to the Better Gmail page, grab the extension and enjoy the better view. Links Download the Better Gmail extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Figure out which Online accounts are selling your email to spammersAdd a Remember The Milk Task Pane to Gmail in ChromeHow to Send and Receive Hotmail from Your Gmail AccountAdd Your Gmail To Windows Live MailOpen Your Gmail Account in a Popup Window TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet

    Read the article

  • WebLogic Partner Community Newsletter June 2013

    - by JuergenKress
    Dear WebLogic Partner Community member, This month newsletter contains tons of Java material with the availability of Java EE7! Including many articles in the May/June Java Magazine and the Duke Award nomination! Thanks for all your efforts to become certified and Specialized. For all the experts who achieved the WebLogic Server 12c Certified Implementation Specialist  or ADF 11g Certified Implementation Specialist you can download a logo for your blog or business card at the Competence Center. For all the companies who achieved a WebLogic and ADF Specialization you can request a nice plaque for your office. Summer time is training time – make sure you attend our Fusion Middleware Summer Camps or one of our upcoming Exalogic Implementation Workshop by PTS in Spain, Turkey and Middle East. For those who can not make it we offers plenty of online courses like the New ADF Academy. Or the webcast The value of Engineered Systems for SAP. At our WebLogic Community Workspace (WebLogic Community membership required) you can find Engineered Systems Strategy presentation. Thanks to the community for all the WebLogic best practice papers and tools like Automated provision of Oracle Weblogic Server Platform & Frank’s Coherence videos on YouTube & Create and deploy applications on the Oracle Java Cloud & WebLogic Application redeployment using shared libraries - without downtime & Oracle Traffic Director. The first tests deployments for WebLogic on Oracle Database Appliance are on the way, thanks to all who are their experience: Sizing & Configuration and Traffic Director. Virtualised Oracle Database Appliance Proof of Concept - #1 Planning from Simon Haslam. Would be great if you can also share your experience via twitter @wlscommunity! In the ADF section of the newsletter you find Tuning Application Module Pools and Connection Pools & List View - Cool Looking ADF PS6 Component for Collections & Insider Essential & User Interface & Skinning & Oracle Forms to ADF Modernization reference. Great summer time! Jürgen Kress Oracle WebLogic Partner Adoption EMEA To read the newsletter please visit http://tinyurl.com/WebLogicnewsJune2013 (OPN Account required) To become a member of the WebLogic Partner Community please register at http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic Community newsletter,newsletter,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • Should CSS be listed on your resume under Languages?

    - by Sandeepan Nath
    I have some doubts like Whether CSS should be put under Languages or not? Although Wikipedia says Cascading Style Sheets (CSS) is a style sheet language ... But do they write CSS under the languages section of the resume, along with PHP, etc? Similarly what about HTML? I have some doubt and I don't want to sound like someone who is not aware of the trends. Just to give an example, currently I have the following languages,frameworks, technologies, etc. listed under the "Technical Expertise" section of my resume - Technical Expertise * Languages - Proficient - PHP 5, Javascript, HTML ?*,CSS ?*,Sass ?*. Beginner - Linux Bash. * Databases - MySQL 5. * Technologies - AJAX. * Frameworks/Libraries - Symfony, jQuery. * CMSes - Wordpress. Although my domain is Web-development/design, I welcome domain-agnostic answers which can provide some generic ideas/reasoning. I have seen, a lot of people messing up these sections (even more serious than my doubts :) ), putting things under wrong sub-headings and thus putting a big question mark on their understanding of those things. I don't know much about XML, Comet Technology etc. Considering those are included too, What things should be put under Languages? E.g. Should CSS be put under Languages? Please give some reasoning to support your views. Where should the others (XML, Comet, cURL etc. ) be put? I welcome some examples of how you put it. Or do you have an additional Keywords section where you write all the unsortables ? Considering a set of standards like W3C standards, etc. do you have a standards sub-heading? I guess I have put the contents of other sections Okay. But do let me know about your ideas and reasoning. After all, I understand there may not be a single answer to this, but let's see what is the trend. Thanks Updates Further, do you mention design patters you have used? Web Services etc.? Where do you mention SOAP, XML etc...

    Read the article

  • Ubuntu on Pandaboard giving me troubles

    - by Jeroen Jacobs
    I'm trying to install the OMAP4 extras for ubuntu on my pandaboard. For some reason, a few packages can't seem to be agree with eachother. This what I did so far: installed on Ubuntu 11.10 on sd card Powered on Pandaboard and let it finish it's initial install Did an "apt-get update" and "apt-get upgrade", to install updates So far, everything went fine, and I was quite happy with my Pandaboard, but then I made the mistake of typing this: apt-get install ubuntu-imap4-extras At first, everything seemed ok, and it started downloading and installing. But then after a while it just crashed. I tried it again but then it gave me this: Reading package lists... Done Building dependency tree Reading state information... Done ubuntu-omap4-extras is already the newest version. You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: gstreamer0.10-openmax : Depends: gstreamer0.10-plugins-bad but it is not going to be installed gstreamer0.10-plugin-ducati : Depends: gstreamer0.10-plugins-bad but it is not going to be installed ubuntu-omap4-extras-multimedia : Depends: gstreamer0.10-plugins-bad (>= 0.10.22-2ubuntu4+ti1.5) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). So I tried to the suggestion: apt-get -f install: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: gstreamer0.10-plugins-bad The following NEW packages will be installed: gstreamer0.10-plugins-bad 0 upgraded, 1 newly installed, 0 to remove and 4 not upgraded. 88 not fully installed or removed. Need to get 0 B/1,794 kB of archives. After this operation, 4,571 kB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 143575 files and directories currently installed.) Unpacking gstreamer0.10-plugins-bad (from .../gstreamer0.10-plugins bad_0.10.22-2ubuntu4+ti1.5.4.8+1_armel.deb) ... dpkg: error processing /var/cache/apt/archives/gstreamer0.10-plugins-bad_0.10.22-2ubuntu4+ti1.5.4.8+1_armel.deb (--unpack): trying to overwrite '/usr/lib/libgstbasecamerabinsrc-0.10.so.0.0.0', which is also in package gstreamer0.10-plugins-good 0.10.30-1ubuntu7.1 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/gstreamer0.10-plugins-bad_0.10.22-2ubuntu4+ti1.5.4.8+1_armel.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Seems like two packages (plugins-good and plugins-bad) are fighting over the same library. Any idea on how to fix this??

    Read the article

  • Send raw data to USB parallel port after upgrading to 11.10

    - by zaphod
    I have a laser cutter connected via a generic USB to parallel adapter. The laser cutter speaks HPGL, as it happens, but since this is a laser cutter and not a plotter, I usually want to generate the HPGL myself, since I care about the ordering, speed, and direction of cuts and so on. In previous versions of Ubuntu, I was able to print to the cutter by copying an HPGL file directly to the corresponding USB "lp" device. For example: cp foo.plt /dev/usblp1 Well, I just upgraded to Ubuntu 11.10 oneiric, and I can't find any "lp" devices in /dev anymore. D'oh! What's the preferred way to send raw data to a parallel port in Ubuntu? I've tried System Settings Printing + Add, hoping that I might be able to associate my device with some kind of "raw printer" driver and print to it with a command like lp -d LaserCutter foo.plt But my USB to parallel adapter doesn't seem to show up in the list. What I do see are my HP Color LaserJet, two USB-to-serial adapters, "Enter URI", and "Network Printer". Meanwhile, over in /dev, I do see /dev/ttyUSB0 and /dev/ttyUSB1 devices for the 2 USB-to-serial adapters. I don't see anything obvious corresponding to the HP printer (which was /dev/usblp0 prior to the upgrade), except for generic USB stuff. For example, sudo find /dev | grep lp produces no output. I do seem to be able to print to the HP printer just fine, though. The printer setup GUI gives it a device URI starting with "hp:" which isn't much help for the parallel adapter. The CUPS administrator's guide makes it sound like I might need to feed it a device URI of the form parallel:/dev/SOMETHING, but of course if I had a /dev/SOMETHING I'd probably just go on writing to it directly. Here's what dmesg says after I disconnect and reconnect the device from the USB port: [ 924.722906] usb 1-1.1.4: USB disconnect, device number 7 [ 959.993002] usb 1-1.1.4: new full speed USB device number 8 using ehci_hcd And here's how it shows up in lsusb -v: Bus 001 Device 008: ID 1a86:7584 QinHeng Electronics CH340S Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1a86 QinHeng Electronics idProduct 0x7584 CH340S bcdDevice 2.52 iManufacturer 0 iProduct 2 USB2.0-Print iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 96mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Device Status: 0x0000 (Bus Powered)

    Read the article

  • ATI (fglrx) Dual monitor / laptop hot-plugging

    - by Brendan Piater
    I feel like I've gone back 5 years on my desktop today. I'll try not dump to much frustration here... I been running 12.04 since alpha with the ATI open source drivers and the gnome 3 desktop. I been generally very happy with them with only small issues along the way. Now of course it does not support 3D acceleration 100%, so games like my newly purchased Amnesia from the Humble bundle would not play. OK, no worries, the ATI driver is in the repos so let me have a go I thought. With all this testing that's been done with multi-monitor support, what could go wrong...? How I use my computer: It's laptop, with a HD 3670 card in it. I spend about 50% of the time working directly on the laptop (at home) and about 50% of the time working with an additional display connected (at work), multi desktop environment. What happening now: installed drivers things seemed to working, save some small other bugs (not critical) this morning I take my machine and plug the additional monitor into it, and nothing happens... ok fine. open "displays" try configure dual display, won't work open ati config "thing" (cause it is a thing, a crap thing) and set-up monitors there reboot it says (oh ffs, really.... ok) reboot, login and wow, I got a gnome 2 desktop (presume gnome 3 fall back) and no multi-monitor...great. (screenshot: http://ubuntuone.com/5tFe3QNFsTSIGvUSVLsyL7 ) after getting into a situation where I had to Ctrl + Alt + Del to get out of a frozen display, I eventually manage to set-up a single display desktop on the "main" monitor ok.. time to go home... unplug monitor... nothing happens.. oh boy here we go... try displays again, nothing, just hangs the display.. great. crash all the apps and reboot... So it's been a trying day... What I really hope is that someone else has figured out how to avoid this PAIN. Please help with a solution that: allows me run fglrx (so I can run the games I want) allows me to hot-plug a monitor to my laptop and remove it again allows me to change the display so include the hot-plugged monitor (preferable automatically like it did with the open drivers) Next best if that's not possible: switch between laptop only display and monitor only display easily (i.e. not having to reboot/logout/suspened etc) Really appreciate the time of anyone that has a solution. Thanks in advance. Regards Brendan PS: I guess I should file a bug about this too, so some direction as to the best place to file this would be appreciated too.

    Read the article

< Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >