Search Results

Search found 9122 results on 365 pages for 'sound card'.

Page 302/365 | < Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >

• 1000baseT/Full Supported and Advertised but not working!

  - by user11973

  Hello, i'm using a AT3IONT-I motherboard with integrated card. If I ethtool it to 1000 full duplex it wont work! Here is sudo ethtool eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) Link detected: yes here is sudo lshw -C network: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: 03 serial: bc:ae:c5:8b:7d:33 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.021.00-NAPI duplex=full ip=192.168.0.2 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s resources: irq:42 ioport:e800(size=256) memory:f8fff000-f8ffffff memory:f8ff8000-f8ffbfff memory:fbff0000-fbffffff And lspci -nn: 00:00.0 Host bridge [0600]: nVidia Corporation MCP79 Host Bridge [10de:0a82] (rev b1) 00:00.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0a88] (rev b1) 00:03.0 ISA bridge [0601]: nVidia Corporation MCP79 LPC Bridge [10de:0aad] (rev b3) 00:03.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0aa4] (rev b1) 00:03.2 SMBus [0c05]: nVidia Corporation MCP79 SMBus [10de:0aa2] (rev b1) 00:03.3 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0a89] (rev b1) 00:03.5 Co-processor [0b40]: nVidia Corporation MCP79 Co-processor [10de:0aa3] (rev b1) 00:04.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa5] (rev b1) 00:04.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa6] (rev b1) 00:06.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa7] (rev b1) 00:06.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa9] (rev b1) 00:08.0 Audio device [0403]: nVidia Corporation MCP79 High Definition Audio [10de:0ac0] (rev b1) 00:09.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Bridge [10de:0aab] (rev b1) 00:0b.0 RAID bus controller [0104]: nVidia Corporation MCP79 RAID Controller [10de:0abc] (rev b1) 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac4] (rev b1) 00:10.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0aa0] (rev b1) 00:15.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac6] (rev b1) 03:00.0 VGA compatible controller [0300]: nVidia Corporation ION VGA [10de:087d] (rev b1) 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) If i use Code: sudo ethtool -s eth0 speed 1000 duplex full autoneg off then in ethtool speed is Unknown and it doesn't work; if I set it via pre-up it wont work either... Please help!! Thanks!

  Read the article

• Ubuntu is booting on acer e1-510 laptop, but screen displays nothing

  - by user287602

  Tried loading ubuntu 12.04 (32-bit as well 64 bit) through bootable usb , on a brand new 64-bit acer E1-510 laptop. It shows the 'Try ubuntu without installing screen' and I selected that option. But instead of showing ubuntu's logo(which implies it is loading). I get a blank screen. The screen is on, but it shows nothing. I tried the same on an old model laptop acer aspire 5738 and it worked like a charm. However, I realized that Ubuntu is actually booting on E1-510 and only the display is not working. How did I arrive at this conclusion? When I select on 'Try ubuntu without installing screen', after about 8-10 seconds I see that the WiFi indicator light on the laptop panel switches on(just like when we boot up a Windows OS or even Ubuntu ). I got an idea that the system booted Ubuntu. To confirm this, I tried to adjust volume using keyboard shortcuts. Voila, I can hear the sound of adjusting volume! That means it has already booted Ubuntu. I confirmed this with another step. I pressed the power button once and after two seconds I pressed ENTER. It began the process of switching off and within 5 seconds the laptop was powered off. You may ask, Why is this a confirmation that Ubuntu has booted? This is because in Ubuntu when you press on power button, a dialog box opens with shut down, restart, suspend option- and the shut down option is already selected by default; so all I have to do is press ENTER to shut down. This again proved that Ubuntu was indeed up and running. Unlike previous 'AskUbunutu' posts about Acer e1-510, I must mention that my laptop came WITH the Legacy BIOS mode, so its not really a problem to boot ubuntu from a bootable pendrive. Only the screen is not working. In case you need to know, I am running Windows 7-Ultimate 64 bit on acer e1-510.

  Read the article

• Them and us

  - by Plip

  As much as we try and create inclusive societies throughout the globe time and time again we revert to our tribal and clan origins back in the distant past, be those line split across the obvious like  Nationality, Religion or even the Football teams we follow. Microsoft to me has always been a “them”. I was always on the outside looking in, free to say as I wished and have an external objective viewpoint. Now, after my first week (well four days but who’s counting) Microsoft is an “us” for me. So when I look up in the Atrium of Building 1 at Microsoft’s UK headquarters I see banners like the one above and I already genuinely feel a part of this much bigger community. I looked up at that and I felt a sense of pride to be part of something bigger, something which is out there touching peoples lives everywhere (for the good and the bad). My objectivity has made me who I am today. I’m open to other ideas and concepts, I’ve worked hard to be understanding across the board be it from technology through to cultural differences in my life and it’s vital to me that I preserve that so I now have to learn how I balance the “them” of Microsoft to the “us” of Microsoft and maintain the objectivity. It’s my job to advise people on the best way to do things, which won’t always mean “Use Microsoft Technology X”, sometimes it’ll be my responsibility to say “Don’t use Microsoft Technology X”. My first and foremost responsibility is to the customer, to give them the best advice that I can and I want to maintain that. Yeah, I’m sure I’ll be tarred by some as a Microsoft guy, for many years I’ve had just that, but those out there in the non Microsoft communities I’ve engaged in I think know that I’m the first to say when I think something is a bit naff. So, here’s my ask to you ‘the community’. Keep me honest. If I start to sound like a fanboi I want you to find me and give me a slap. It’s all too easy to forget reality sometimes and I want to make sure I stay well and truly routed in that reality. Also, no matter how much I embed myself within Microsoft I fear I will never understand Microsoft’s marketing team. In the Gents just under the WP7 banner shown above I was faced with this. Draw your own conclusions on what it’s message is.

  Read the article

• Webcast

  - by bwalstra

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} Invites You To: Monetizing Digital Media From Clicks To Cash Digital goods and services are booming, and smart businesses are transforming the way they sell and deliver their offerings in the exploding digital marketplace. Using information-services, credit-card, and digital-media examples Oracle’s Mustafa Oyumi and Tripp Partain will show the Oracle Digital Media solution - from clicks to cash: · Design, Model, and Launch New Products · Review Real Time Market Effectiveness and Respond · Rate, Bill, Invoice, Revenue Rec, and Collect · Determine Rights, Royalties, Licensing, and Commissions · Analyze Enterprise Results Friday, July 6, 2012 11:00 a.m. – 11:45 a.m. <Webcast Details> <Webcast Details> Agenda 11:00 a.m. Overview 11:10 a.m. Demo 11:30 a.m. Q&A Copyright © 2012, Oracle. All rights reserved. Contact Us | Legal Notices and Terms of Use | Privacy Statement 36526 Oracle Corporation - Worldwide Headquarters, 500 Oracle Parkway, OPL - E-mail Services, Redwood Shores, CA 94065, United States Create or update your profile to receive customized e-mail about Oracle products and services. If you do not wish to receive any further electronic marketing communications from Oracle you can Opt-Out completely, please note you will no longer receive newsletters and product information you may have subscribed to.

  Read the article

• Why is my dual-boot Ubuntu partition showing up as a peripheral "root.disk"?

  - by Don

  I recently installed Ubuntu 12.04, which I had been booting from a usb key, as a dual-boot on my machine running Windows 7. From what I had read online while researching, I was prepared to have to shrink the Windows partition and all that. But I never had to - it really was just a few clicks here and there and it was installed. I'm still pretty confused about it, but whatever, it worked, and the two peacefully coexist on my machine, and I have broken things to fix before I worry about fixing unbroken things. So yesterday I got it in my head to look at my partitions (I was considering making an all new partition to install the Windows 8 Release Preview). What I saw confused me. Here's a screenshot of the disk utility. At this moment, there is nothing connected to my computer, and nothing in any of the optical drives/ports/card readers/etc. Can you help me figure out what's going on here? Don's Machine is, I believe, my Windows partition - that's the name I assigned my machine from Windows Explorer. PQSERVICE is from what I can find online also Windows, but having to do with backup. And SYSTEM REQUIRED, if I browse it in Ubuntu, is definitely something to do with booting, and I believe it is also Windows'. According to the sizes shown, those three together should use up my 500 GB HD. Then further down, as a "peripheral device", it lists that 31 GB disk. This is obviously my Ubuntu (Model:Linux Loop:root.disk), but why is it showing up as a peripheral? So, to sum up those questions and to add some more random ones I had: Why is Ubuntu showing up as a peripheral device? If the Windows sections take up all 500 GB, where does Ubuntu live? If I renamed the disk partitions, would my life become a nightmare (seriously - can I safely rename them)? Why didn't I have to resize the Windows partition in the first place? Would giving Ubuntu more space improve its performance (it hangs alot)? Is it possible to have a partition for each OS (Windows 7 & 8, Ubuntu), a partition for files, and a separate partition for backups? Is this towards the good or bad idea end of the spectrum? @Elfy, would that explain why it keeps hanging? I guess I'll backup my files, rip it out, and reinstall it correctly later on today.

  Read the article

• How to customize web app template admintasia? [closed]

  - by Balaji

  The below is my requirement, Login page Login page for all To search whether a user-id & password are a valid or not. To identify whether the user is of which category, namely, Admin, Manager, User. Redirect the page accordingly for respective user with their privilege. Admin - Manager – User Forgot password, Get username of email address and send the credential by validating the user input. Login & Operations Admin Display all submitted forms by admin, manager and user Tabs – Submissions, Mange form & Manage users. Submissions There must be a ‘sort’, listing, admin, manager and user. Username column should hyper link to edit the user account There must be a ‘sort’ option as ‘ALL’ while this option is chosen; the admin must be capable to view, as below, If Admin selects ‘admin’ from dropdown all submitted forms by admin user accounts should display and this operation is similar for the manager account as above. Manage forms, Agent Name, Credit Site, Lenders, Type of Loan, No Scores and Type Of Card Add, edit, update, delete Active and inactive Always display active records. Manage users, Create a user, User account type, (Admin or Manager or User) User email option Edit & update user, Change username Prompt: are you sure? Change password Prompt: are you sure? Delete user Prompt: are you sure you want to delete? Edit – value – this value should be updated in the common form used by all type of users. Manager Display all submitted forms by managers and users. Submissions and Manage users, Submissions Operations Admin Create filter values, admin, manager and user. Edit - filter values, admin, manager and user. Delete filter values, admin, manager and user. View. Manager Create a user only. View forms. User view and/ or submit form only Logout Log out for all. Prompt: Are you sure you want to log-out. I have downloaded adminstasia. How do I customize this template for the above requirement? The installation is same alike if you check this URL, http://www.admintasia.com/demo/

  Read the article

• How to troubleshoot ethernet port on laptop

  - by Psallas Vassilios

  I have a problem with my wired connection. To be more specific, my laptop doesn't seems to recognize that I have plugged in an ethernet cable. I tried to download new drivers for my ethernet card, but I couldn't find any solutions. Maybe because I am new to Linux, so I'm not familiar with running commands in the terminal. OK I have typed the command and here are the results: 00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter [1039:0191] (rev 02) For the second reply I don't know if the following is what you asked me: ?Memory: 3.9 GiB ?Processor: Intel Core 2 Duo CPU P8800 @ 2.66GHz × 2 ?OS type: 32-bit My Ethernet connection had some problem on Windows too. I have changed recently my internet provider, and since then my ethernet cable is not recognized by the laptop. At that time I was still on Windows. I thought that with Ubuntu the problem would be solved, but unfortunately the problem still persists. If someone can help me to solve my problem I'll be thankful. Here are the results of the three first commands you told me to run: lsmod | grep sis190 sis190 22570 0 sudo modprobe sis190 ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:90:81:7e UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:185 errors:0 dropped:0 overruns:0 frame:0 TX packets:185 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:22672 (22.6 KB) TX bytes:22672 (22.6 KB) wlan0 Link encap:Ethernet HWaddr 00:25:d3:2c:3a:ae inet addr:192.168.1.72 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::225:d3ff:fe2c:3aae/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:260 errors:0 dropped:0 overruns:0 frame:0 TX packets:363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:71992 (71.9 KB) TX bytes:52000 (52.0 KB) and the results of running the last two commands: dmesg | grep -e eth -e sis190 [ 0.816667] sis190: sis190 Gigabit Ethernet driver 1.4 loaded [ 0.816728] sis190 0000:00:04.0: setting latency timer to 64 [ 0.816751] sis190: 0000:00:04.0: Read MAC address from EEPROM [ 0.904032] sis190: 0000:00:04.0: Realtek PHY RTL8201 transceiver at address [ 1.416030] sis190: 0000:00:04.0: Using transceiver at address 1 as default [ 1.448235] sis190 0000:00:04.0: eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f8410000 (IRQ: 19), 00:90:f5:90:81:7e [ 1.448238] sis190 0000:00:04.0: eth0: GMII mode. [ 1.448243] sis190 0000:00:04.0: eth0: Enabling Auto-negotiation [ 11.560907] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.372019] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.372265] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.424038] sis190 0000:00:04.0: eth0: auto-negotiating... nm-tool NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: sis190 State: unavailable Default: no HW Address: 00:90:F5:90:81:7E Capabilities: Carrier Detect: yes Wired Properties Carrier: off

  Read the article

• Behaviour Trees with irregular updates

  - by Robominister

  I'm interested in behaviour trees that aren't iterated every game tick, but every so often. (Edit: the tree could specify how many frames within the main game loop to wait before running its tick function again). Every theoretical implementation I have seen of behaviour trees talks of the tree search being carried out every game update - which seems necessary, because a leaf node (eg a behaviour, like 'return to base') needs to be constantly checked to see if is still running, failed or completed. Can anyone suggest how I might start implementing a tree that isnt run every tick, or point me in the direction of good material specific to this case (I am struggling to find anything)? My thoughts so far: action leaf nodes (when they start) must only push some kind of action object onto a list for an entity, rather than directly calling any code that makes the entity do something. The list of actions for the entity would be run every frame (update any that need to run, pop any that have completed from the list). the return state from a given action must be fed back into the tree, so that when we run the tree iteration again (and reach the same action leaf node - so the tree has so far determined that we ought to still be trying this action) - that the action has completed, or is still running etc. If my actual action code is running from an action list on an entity, then I possibly need to cancel previously running actions in the list - i am thinking that I can just delete the entire stack of queued up actions. I've seen the idea of ActionLists which block lower priority actions when a higher priority one is added, but this seems like very close logic to behaviour trees, and I dont want to be duplicating behaviour. This leaves me with some questions 1) How would I feed the action return state back into the tree? Its obvious I need to store some information relating to 'currently executing actions' on the entity, and check that in the tree tick, but I can't imagine how. 2) Does having a seperate behaviour tree (for deciding behaviour) and action list (for carrying out actual queued up actions) sound like a reasonable approach? 3) Is the approach of updating a behaviour tree irregularly actually used by anyone? It seems like a nice idea for budgeting ai search time when you have a lot of ai entities to process. (Edit) - I am also thinking about storing a single instance of a given behaviour tree in memory, and providing it by reference to any entity that uses it. So any information about what action was last selected for execution on an entity must be stored in a data context relative to the entity (which the tree can check). (I am probably answering my own questions as i go!) I hope I have expressed my questions adequately! Thanks in advance for any help :)

  Read the article

• Please Help Me Install Firestorm?

  - by Elle Caszatt

  I have been trying for hours just to install one program. In this time, I've tried my best to follow directions and not screw everything up but I have. I'm new to Linux. I tried to install Firestorm and this is what happened: parent@ubuntu:~$ sudo '/home/parent/Downloads/Phoenix_Firestorm-Release_i686_4.2.1.29803/install.sh' [sudo] password for parent: Enter the desired installation directory [/opt/firestorm-install]: /home/parent/downloads - Installing to /home/parent/downloads /home/parent/Downloads/Phoenix_Firestorm-Release_i686_4.2.1.29803/install.sh: line 80: /home/parent/downloads/etc/refresh_desktop_app_entry.sh: Permission denied parent@ubuntu:~$ sudo opt/firestorm-install sudo: opt/firestorm-install: command not found parent@ubuntu:~$ ./etc/refresh_desktop_app_entry.sh bash: ./etc/refresh_desktop_app_entry.sh: No such file or directory parent@ubuntu:~$ sudo '/home/parent/Downloads/Phoenix_Firestorm-Release_i686_4.2.1.29803/install.sh' Enter the desired installation directory [/opt/firestorm-install]: /home/parent - Backing up previous installation to /home/parent.backup-2012-08-27 - Installing to /home/parent cp: cannot stat `/home/parent/Downloads/Phoenix_Firestorm-Release_i686_4.2.1.29803/*': No such file or directory Failed parent@ubuntu:~$ Now whenever I go into my files it says it can't find anything. Like Cannot find home/parent/Downloads. Now, I KNOW there are downloads. I don't know why it's doing this all of a sudden. I'm so frustrated that I'm ready to just go back to Windows. I've already had to uninstall/reinstall Ubuntu once today. It's looking like I"m going to have to do it again. How can I fix my file problem that I'm now having and can someone please, please tell me how to install Firestorm? I mean they don't even have their repository listed. It's ridiculous to have to go through this over a program. Spotify wasn't hard at all to install so why is this? Someone please help, and I'm sorry if I sound like a total idiot. I'm pretty tech savvy but I'm honestly pretty upset after struggling with this for hours. Edit Okay, I see the problem with the directory files (showing the error I mentioned above when I try to click on them). I can only access my downloads, desktop, ect, through the backup that was created when I tried to install Firestorm. It's like that's the real home now. How can I get it back to the way it was? Edit Ubuntu has stopped working for me on reboot now. It doesn't go past the login screen. This is exactly what happened when I had to uninstall it before after trying to install Firestorm. Maybe I'm giving up too easily but I think I'm just going to go back to Windows. If this is what's going to happen every time I innocently try to install a program then it's just not worth it. I installed it specifically to run Firestorm because Windows sucks up a lot of CPU and causes lag. I still appreciate any input but this is just too much hassle for something that shouldn't be hard.

  Read the article

• How can I get my ATI / AMD drivers to work with any kernel above 3.2.0.x?

  - by TorakTu

  How can I get my ATI / AMD drivers to work with any kernel above 3.2.0.x ? WHAT DID WORK Installed original AMD64 version of Ubuntu 12.04 ISO image. Burned DVD and installed which shown kernel 3.2.0-23 to begin with. Got 5.1 surround sound working. Got ATI ( Now its AMD ) video drivers installed for my Radeon HD R6870 Video card from AMD's website. fglrxinfo came up and reported as normal. THE PROBLEM Kernel 3.2.0.x kept locking up so I tried higher kernel versions. But ATI / AMD Drivers do not install on any kernel Above 3.2.0.x WHAT I HAVE TRIED I have gone over this tutorial many times ( https://help.ubuntu.com/community/BinaryDriverHowto/ATI ) and it doesn't work on ANY kernel except 3.2.0.x. The problems I am having here are that the ATI / AMD drivers working for the 12.04 Precise with kernel 3.2.0-23 and 24, But the computer kept locking up. Although all my games would work, the lock ups were random and were constant. So I looked all over the web for 3 days trying to find an answer and the lock up issue was said to just update the kernel. So I did. Have tried many kernels. All of them .. no lock ups. BUT the Restricted AMD drivers from the AMD website will not install. And none of the OpenSource AMD drivers have EVER installed no matter what Kernel or version I tried. EXAMPLE OUTPUT OF 3D TYPE OF ERRORS Javax.media.opengl.GLException: glXGetConfig failed: error code GLX_NO_EXTENSION at com.sun.opengl.impl.x11.X11GLDrawableFactory.glXGetConfig(X11GLDrawableFactory.java:651) at com.sun.opengl.impl.x11.X11GLDrawableFactory.xvi2GLCapabilities(X11GLDrawableFactory.java:350) at com.sun.opengl.impl.x11.X11GLDrawableFactory.chooseGraphicsConfiguration(X11GLDrawableFactory.java:174) at javax.media.opengl.GLCanvas.chooseGraphicsConfiguration(GLCanvas.java:520) at javax.media.opengl.GLCanvas.<init>(GLCanvas.java:131) at haven.HavenPanel.<init>(HavenPanel.java:68) at haven.HavenPanel.<init>(HavenPanel.java:78) at haven.MainFrame.<init>(MainFrame.java:182) at haven.MainFrame.main2(MainFrame.java:306) at haven.MainFrame.access$100(MainFrame.java:34) at haven.MainFrame$7.run(MainFrame.java:360) at java.lang.Thread.run(Thread.java:722) And of course this is what fglrxinfo shows : X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 139 (ATIFGLEXTENSION) Minor opcode of failed request: 66 () Serial number of failed request: 13 Current serial number in output stream: 13 EDIT : I forgot to mention that I DID look at this post over the last few days and it did not help.

  Read the article

• Lenovo Thinkpad X1 Carbon support

  - by Robottinosino

  I am considering selling my Mac to get money towards a Lenovo Thinkpad X1 because what I really want to do is to be running an Ubuntu system all the time. Is this machine completely supported in Ubuntu, with no tiny little feature missing just because I am "going Linux"? Optional user story section, skip to the question below if you don't have time: I have a friend who bought a "works on Ubuntu" system a year ago and has hated the fact ever since: battery lasts less than if he boots in Windows (which he despises) and he ascribes that to "no good OS/harware integration and support for advanced chipset power management features", odd behaviour on suspend/resume/hibernate (says: "when it works 90% of the time and the other 10% it makes you lose your work is as good as broken - 90% is the same as 0% he says), some occasional graphics card glitches he can perfectly well live with and has almost grown affectionate to, and finally, and that is what would make him undo his choice if he could, bad "input device drivers". He says: trackpoint and trackpad just "feel different", "so much better" on Windows and that was impossible to know from the website brochure. That story makes me very doubtful... but I want to abandon this "walled garden" of prison that is my Mac and go Ubuntu all the way, no doubt about that! My dilemma at this time is just: "I don't want to live with those eternal frustrations for sure"! Here's a directly answerable phrasing of my question: Is the Lenovo Thinkpad X1 supported on Ubuntu? Yes/no, which version? Which hardware features are not supported? Provide a list Optionally: sort the list in descending order of frustration from your experience Optionally: mention if there are acceptable workarounds to the "out-of-the-box" condition described in the earlier points and whether this ameliorates frustration at least to "tolerable" levels Comment: the Ubuntu hardware certification page is so not-for-end-users it's unreal. Whoa. What would make it end-user friendly is: Link to "buy here and you'll be just fine, this is the right configuration for you, it'll work as long as you press BUY on that page and don't browse further" Remove mentions of may and might not work. Just tell it straight: press buy here and you will get a working system with the exception of A, B, C (so that I can decide whether the philosophical "freedom pleasure" I get from escaping an Apple world is enough to off-balance the loss, for instance, of Bluetooth capabilities (something that I of course use on my Mac) but "could" lose to use free (as in freedom) software The certification page fails to dispel doubts in me as an end-user. I don't feel "eased into Ubuntu", I feel "partially informed".

  Read the article

• Investment scheme for a PC game the project

  - by Alex Kamen

  Good day everyone, I am working on a PC game project that has 3 phases planned, micro, macro and mmo versions [if confused, see a brief description at the bottom]. I have found a potential investor for the micro version of the game, but naturally, he requested a detailed plan of how the game will pay back. And the problem is that micro version itself is not supposed to be monetized much, other than some ads and limited in-game currency utilization. The idea is that with this combat demo already at hand, it should be possible to get a really large enough investment (millions of dollars) and use it to pay back the initial small one (thousands of dollars) and take the project into macro phase, which will really make profit. This way, everybody is going to win, provided that I can deliver the end-product. Yet while I am confident of that both the conception of the macro and the real game-play of the micro versions are going to be appealing, I don’t know how to obtain any guarantee of that I will be able to get funded once I have the prototype ready. And without that, I won’t receive the funds for the prototype in the first place! To summarize, my question is: how to figure out my future possibilities of getting funded once I have combat demo out, basically “whom to write to and what”. Ideally, I would like some sort of a preliminary agreement with a game publisher, something that would basically state “If the developer provides the product in time and in quality corresponding to the specifications given, the publisher guarantees to allocate funds for distribution and further development, thereby acquiring the right to X part of all future profits”. Does this sound sane? It’s just that I don’t want to sell all of my rights out straight away by taking a big outside investment while the project is in such early stage. I would appreciate if you would share your thoughts on this kind of scheme, and be sure to ask questions as I am sure I must have forgotten to mention a ton of important things, like the fact that initial funds are going to be spent on outsourcing (living in Siberia is really just great). [here’s a brief outline of what each version will feature] [micro] 1) turn based tactical combat rules 2) character development 3) arena/tournament system [macro] 4) ai-ruled dynamic interactive worlds 5) global map adventuring 6) strategic rpg + god simulator gameplay [mmo] 7) Persistent worlds system 8) Social structures system (“guilds/clans”) 9) god-simulation on the mmo scale P.S. Obviously, these features are incremental, so that mmo version has all 9.

  Read the article

• 12.04 Unity 3D 80% CPU load with Compiz

  - by user39288

  EDIT : I have been able to to determine that the problem is not compiz, but is actually Xorg. I don't know why, but by quickly maximizing terminal and taking a screenshot with top running before the problem went away I am able to see xorg takes up 72% of cpu, with bamfdaemon taking up 18%, and compiz taking up 14%. Seems the nvidia drivers are to blame, will play more with settings and perhaps do a clean nvidia-current install to try to fix the problem. Having a very annoying problem with high CPU usage. Running 12.04 with latest drivers and nvidia-current installed. Have not had any issues for days, now I have a strange problem. Unity 3d runs great most of the time, 1-2% CPU usage with only transmission running in background. Windows open and close smoothly. However,no matter what programs are open, if I minimize all open programs to the unity bar on the left, my CPU jumps to about 80% and slows down all maximize and minimize effects. Mouse movement stays smooth the whole time, but unity becomes unresponsive for up to 30 seconds at times. Hitting alt + tab to bring up even a single window fixes the problem. The window I bring back up doesn't even have to be maximized to solve the problem. Hitting the super button to bring up the dash makes CPU drop back to idle until I close it, then high CPU usage resumes. Believe the problem is compiz, but even just having only terminal running "top", I have to minimize it to the tray for the problem to show, so I can't see the problem process. I can only tell about the high CPU usage using indicator-sysmonitor. Even tried quitting the indicator, but I can still tell very poor performance with all applications when minimized. Reset compiz back to defaults, tried going to the post-release update nvidia drivers, played with vsync settings in both the nvidia settings and compiz. Even forced refresh rate, but cannot solve the problem. The problem does NOT occur in Unity 2D. Specs are core 2 duo 2.0ghz, 4GB ddr2 ram, 2x 320's HDD in RAID 0, and Nvidia GTX 260M graphics card.

  Read the article

• "static" as a semantic clue about statelessness?

  - by leoger

  this might be a little philosophical but I hope someone can help me find a good way to think about this. I've recently undertaken a refactoring of a medium sized project in Java to go back and add unit tests. When I realized what a pain it was to mock singletons and statics, I finally "got" what I've been reading about them all this time. (I'm one of those people that needs to learn from experience. Oh well.) So, now that I'm using Spring to create the objects and wire them around, I'm getting rid of static keywords left and right. (If I could potentially want to mock it, it's not really static in the same sense that Math.abs() is, right?) The thing is, I had gotten into the habit of using static to denote that a method didn't rely on any object state. For example: //Before import com.thirdparty.ThirdPartyLibrary.Thingy; public class ThirdPartyLibraryWrapper { public static Thingy newThingy(InputType input) { new Thingy.Builder().withInput(input).alwaysFrobnicate().build(); } } //called as... ThirdPartyLibraryWrapper.newThingy(input); //After public class ThirdPartyFactory { public Thingy newThingy(InputType input) { new Thingy.Builder().withInput(input).alwaysFrobnicate().build(); } } //called as... thirdPartyFactoryInstance.newThingy(input); So, here's where it gets touchy-feely. I liked the old way because the capital letter told me that, just like Math.sin(x), ThirdPartyLibraryWrapper.newThingy(x) did the same thing the same way every time. There's no object state to change how the object does what I'm asking it to do. Here are some possible answers I'm considering. Nobody else feels this way so there's something wrong with me. Maybe I just haven't really internalized the OO way of doing things! Maybe I'm writing in Java but thinking in FORTRAN or somesuch. (Which would be impressive since I've never written FORTRAN.) Maybe I'm using staticness as a sort of proxy for immutability for the purposes of reasoning about code. That being said, what clues should I have in my code for someone coming along to maintain it to know what's stateful and what's not? Perhaps this should just come for free if I choose good object metaphors? e.g. thingyWrapper doesn't sound like it has state indepdent of the wrapped Thingy which may itself be mutable. Similarly, a thingyFactory sounds like it should be immutable but could have different strategies that are chosen among at creation. I hope I've been clear and thanks in advance for your advice!

  Read the article

• Can't boot Ubuntu 12.10 graphics problem

  - by Frantumn

  I can't boot since installing Ubuntu 12.10 When I try to run Ubuntu My computer never gets to the Ubuntu screen with the loading dots. I tried to run in recovery mode with safe graphics (failsafex) When I do this a message pops up saying "the system is running in low graphics mode", If I click okay I am asked what would I like to do and am given four options. I tried running low graphics for one session and then a message appears with a progress bar and says standby one minute while the display restarts. The progress bar never moves and if I click okay the whole process just restarts. I Don't know what to do from here I can't get into the OS. I'm not sure whether the problem is related to compatibility with my laptop monitor or my graphic card nvidia360m I had to install using a safe graphics mode. To learn about how I installed see this link. This link also has information on my computer hardware. Can't install Ubuntu since 10.10 ----UPDATE--- I was able to get into a desktop environment By installing Nvidia-current however it is messy. I have a screen and I am able to see my desktop however there is no unity bar and none of the keyboard controls work. I can right click and create a folder on the desktop and then I can see inside that folder in a traditional browser window. There is still no top menu or unity bar. When I boot normally I don't get into the desktop environment and I get this message in tty 'GPU lockup switching to software FBCON' Okay, I've played around with tips the pages from comments. I've been able to consistantly get into a safemode desktop environment using the xorg & nouveau drivers. I've tried switching between the 5 different options in the Additional Drivers tab in Software Sources. The nVidia (proprietary, tested) driver gets beyond the GPU lockup on a normal boot and actually gets into a Desktop. The issue is then that there is no Unity bar, or top screen menu bar and the resolution is very low. I've tried switching to the (prop, tested) driver and then reinstalling Unity and Ubuntu-Desktop but that didn't work either.

  Read the article

• Legitimate use of the Windows "Documents" folder in programs.

  - by romkyns

  Anyone who likes their Documents folder to contain only things they place there knows that the standard Documents folder is completely unsuitable for this task. Every program seems to want to put its settings, data, or something equally irrelevant into the Documents folder, despite the fact that there are folders specifically for this job1. So that this doesn't sound empty, take my personal "Documents" folder as an example. I don't ever use it, in that I never, under any circumstances, save anything into this folder myself. And yet, it contains 46 folders and 3 files at the top level, for a total of 800 files in 500 folders. That's 190 MB of "documents" I didn't create. Obviously any actual documents would immediately get lost in this mess. My question is: can anything be done to improve the situation sufficiently to make "Documents" useful again, say over the next 5 years? Can programmers be somehow educated en-masse not to use it as a dumping ground? Could the OS start reporting some "fake" location hidden under AppData through the existing APIs, while only allowing Explorer and the various Open/Save dialogs to know where the "real" Documents folder resides? Or are any attempts completely futile or even unnecessary? 1For the record, here's a quick summary of the various standard directories that should be used instead of "Documents": RoamingAppData for user-specific data and settings. This is the directory to use for user-specific non-temporary data. Anything placed here will be available on any machine that a given user logs on to in networks where this is configured. Do not place large files here though, because they slow down login/logout in such environments. LocalAppData for user-and-machine-specific data and settings. This data differs for every user and every machine. This is also where very large user-specific data should be placed. ProgramData for machine-specific data and settings. These are the same regardless of which user is logged on, and will not roam to other machines in a network. GetTempPath for all files that may be wiped without loss of data when not in use. This is also the place for things like caches, because like temporary data, a cache does not need to be backed up. Place your huge cache here and you'll save your user some backup trouble. "Documents" itself should only ever be used if the user specified it manually by entering a path or selecting it in a Save dialog. That is the only time it is ever appropriate to save stuff in "Documents".

  Read the article

• Cheese won't start

  - by Anthony Hohenheim

  I can't start Cheese Webcam Booth. It starts loading and there is a brief moment when the window shows up but then it disappears, like it shuts itself down and it's not in system monitor. My webcam works perfectly in Skype video call. I installed and run Camorama and it gave me an error: Could not connect to video device (/dev/video0) Please check connection When I run the lsusb I get this line for my webcam: Bus 002 Device 002: ID 04f2:b210 Chicony Electronics Co., Ltd And for my graphic card, running lspci: VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) It's not a pressing matter, but it bugs my nerves, if it works on Skype, why does Cheese and other programs refuse to run. As I said, it's not a big deal but any help would be appreciated. Running Cheese in terminal: (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkHBox to a GtkButton, but as a GtkBin subclass a GtkButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkButton, but as a GtkBin subclass a GtkButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkHBox to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkButton, but as a GtkBin subclass a GtkButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gdk-WARNING **: The program 'cheese' received an X Window System error. This probably reflects a bug in the program. The error was 'BadDrawable (invalid Pixmap or Window parameter)'. (Details: serial 932 error_code 9 request_code 137 minor_code 9) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.)

  Read the article

• What arguments can I use to "sell" the BDD concept to a team reluctant to adopt it?

  - by S.Robins

  I am a bit of a vocal proponent of the BDD methodology. I've been applying BDD for a couple of years now, and have adopted StoryQ as my framework of choice when developing DotNet applications. Even though I have been unit testing for many years, and had previously shifted to a test-first approach, I've found that I get much more value out of using a BDD framework, because my tests capture the intent of the requirements in relatively clear English within my code, and because my tests can execute multiple assertions without ending the test halfway through - meaning I can see which specific assertions pass/fail at a glance without debugging to prove it. This has really been the tip of the iceberg for me, as I've also noticed that I am able to debug both test and implementation code in a more targeted manner, with the result that my productivity has grown significantly, and that I can more easily determine where a failure occurs if a problem happens to make it all the way to the integration build due to the output that makes its way into the build logs. Further, the StoryQ api has a lovely fluent syntax that is easy to learn and which can be applied in an extraordinary number of ways, requiring no external dependencies in order to use it. So with all of these benefits, you would think it an easy to introduce the concept to the rest of the team. Unfortunately, the other team members are reluctant to even look at StoryQ to evaluate it properly (let alone entertain the idea of applying BDD), and have convinced each other to try and remove a number of StoryQ elements from our own core testing framework, even though they originally supported the use of StoryQ, and that it doesn't impact on any other part of our testing system. Doing so would end up increasing my workload significantly overall and really goes against the grain, as I am convinced through practical experience that it is a better way to work in a test-first manner in our particular working environment, and can only lead to greater improvements in the quality of our software, given I've found it easier to stick with test first using BDD. So the question really comes down to the following: What arguments can I use to really drive the point home that it would be better to use StoryQ, or at the very least apply the BDD methodology? Can you point me to any anecdotal evidence that I can use to support my argument to adopt BDD as our standard method of choice? What counter arguments can you think of that could suggest that my wish to convert the team efforts to BDD might be in error? Yes, I'm happy to be proven wrong provided the argument is a sound one. NOTE: I am not advocating that we rewrite our tests in their entirety, but rather to simply start working in a different manner for all future testing work.

  Read the article

• Nvidia driver overscan issue second monitor via dvi-d cable

  - by benmichael

  Ok, I know that I have a bit of a bizarre setup, but here goes. I have an old laptop, HP Pavilion 6000. The graphics card in there is a GeForce 7150M. The monitor connection is an old 18pin. The external monitor I use is a Samsung SyncMaster 2333. Don't ask me why, but this monitor only has a dvi-d connection (yes, i have searched it). So I have the monitor plugged into the laptop. If I use any of the Nvidia propriety drivers and try to set the resolution up to 1920x1080 (the monitor's native resolution), I get a massive overscan issue. Over the years I have tried to get this to work, tinkering with my xorg.conf to death. I have also tried this on every Ubuntu since 10.04, on all the corresponding LUbuntus, and on all the Linux Mints since Lisa. Exact same issue. I have even tried it in WinDoze and it works perfectly there (although I did get the error once, but was unable to reproduce it). Using the Open Source drivers it works perfectly iff I switch off the laptop monitor (this makes no difference with the Nvidia drivers). I would have happily gone on using the Open Source drivers, except that since upgrading to LUbuntu 12.10, the Open Source drivers make my monitor completely hazy and have the same overscan issue until I (through the haze, only because I know where things are) go to the monitor settings, activate the laptop's monitor, then deactivate it, and suddenly it comes right. I have to do this every time. So I have to find a way to fix one of them, so I may as well tackle the propriety drivers, hence this overlong question. Amidst other things, I have tried the nvidia-settings, but because it is connected to an 18pin, it detects the monitor as a vga monitor and does not give me overscan correction options. I have tried custom modlines (although there are always more of those try), I have tried using xrandr, and I have tried all the FlatPanelOptions. What I have not tried is a Gentoo build, as I don't have time any more to do that installation, but up to about three years ago when I ran Gentoo exclusively I did not have this issue. Below is an link to an image with a red highlight around the portion of the screen visible to me, the numbers around it are the number of pixels which are cut off. This does seem to drift a few pixels every now and then. Thanks in advance. Nvidia driver issue image

  Read the article

• Problem Solving vs. Solution Finding

  - by ryanabr

  By enlarge, most developers fall into these two camps I will try to explain what I mean by way of example. A manager gives the developer a task that is communicated like this: “Figure out why control A is not loading on this form”. Now, right there it could be argued that the manager should probably have given better direction and said something more like: “Control A is not loading on the Form, fix it”. They might sound like the same thing to most people, but the first statement will have the developer problem solving the reason why it is failing. The second statement should have the developer looking for the solution to make it work, not focus on why it is broken. In the end, they might be the same thing, but I usually see the first approach take way longer than the second approach. The Problem Solver: The problem solver’s approach to fixing something that is broken is likely to take the error or behavior that is being observed and start to research it using a tool like Google, or any other search engine. 7/10 times this will yield results for the most common of issues. The challenge is in the other 30% of issues that will take the problem solver down the rabbit hole and cause them not to surface for days on end while every avenue is explored for the cause of the problem. In the end, they will probably find the cause of the issue and resolve it, but the cost can be days, or weeks of work. The Solution Finder: The solution finder’s approach to a problem will begin the same way the Problem Solver’s approach will. The difference comes in the more difficult cases. Rather than stick to the pure “This has to work so I am going to work with it until it does” approach, the Solution Finder will look for other ways to get the requirements satisfied that may or may not be using the original approach. For example. there are two area of an application of externally equivalent features, meaning that from a user’s perspective, the behavior is the same. So, say that for whatever reason, area A is now not working, but area B is working. The Problem Solver will dig in to see why area A is broken, where the Solution Finder will investigate to see what is the difference between the two areas and solve the problem by potentially working around it. The other notable difference between the two types of developers described is what point they reach before they re-emerge from their task. The problem solver will likely emerge with a triumphant “I have found the problem” where as the Solution Finder will emerge with the more useful “I have the solution”. Conclusion At the end of the day, users are what drives features in software development. With out users there is no need for software. In todays world of software development with so many tools to use, and generally tight schedules I believe that a work around to a problem that takes 8 hours vs. the more pure solution to the problem that takes 40 hours is a more fruitful approach.

  Read the article

• Nails vs Screws (C# List vs Dictionary)

  - by MarkPearl

  General This may sound like a typical noob statement, but I’m finding out in a very real way that just because you have a solution to a problem, doesn’t necessarily mean it is the best solution. This was reiterated to me when a friend of mine suggested I look at using Dictionaries instead of Lists for a particular problem – he was right, I have always just assumed that because lists solved my problem I did not need to look elsewhere. So my new manifesto to counter this ageless problem is as follows… Look for a solution that will logically work Once you have a solution look for possible alternatives Decide why your current solution is the best approach compared to the alternatives If it is.. use it till something better comes along, if it isnt…. change What’s the difference between Lists & Dictionaries Both lists and dictionaries are used to store collections of data. Assume we had the following declarations… var dic = new Dictionary<string, long>(); var lst = new List<long>(); long data;   With a list, you simply add the item to the list and it will add the item to the end of the list. lst.Add(data); With a dictionary, you need to specify some sort of key and the data you want to add so that it can be uniquely identified. dic.Add(uniquekey, data);   Because with a dictionary you now have unique identifier, in the background they provide all sort’s of optimized algorithms to find your associated data. What this means is that if you are wanting to access your data it is a lot faster than a List. So when is it appropriate to use either class? For me, if I can guarantee that each item in my collection will have a unique identifier, then I will use Dictionaries instead of Lists as there is a considerable performance benefit when accessing each data item. If I cannot make this sort of guarantee, then by default I will use a list. I know this is all really basic, and I hope I haven’t missed some fundamental principle… If anyone would like to add their 2 cents, please feel free to do so…

  Read the article

• Why can't I install Microsoft Office 2007 in Ubuntu 11.04?

  - by DK new

  I am very new to Ubuntu and only just getting a hang of it, and my questions might sound stupid especially because I am a learner in terms of techie things as well. So because of the nature of work where everyone uses stupid Windows and Microsoft, I need to have access to MS Office 2007/2010 as documents with too many tables or images open all haywire in Libre Office (which has otherwise been great!). I have been reading up about installing MS Office through WINE/PlayonLinux, but have been unsuccessful so far. I downloaded a MS Office 2007 package from Pirate Bay, which I extracted into a folder. I tried numerous different ways to install through WINE and PlayonLinux, but will discuss the one which seems to be getting me somewhere. http://www.webupd8.org/2011/01/how-to-install-microsoft-office-2007-in.html ..... Initially, when I would click on the install button of MS Office, I get a message saying "The install location you selected does not have 1558MB free space. Free up space from the selected install location or choose a different install location". The install location in this case said "C:\Program Files\Microsoft Office", which confused me as I don't have drives named as C, Z etc. I went to configure WINE and under the drives tab, created a drive named A with the path location /media/cd025f16-433b-4a90-abb6-bb7a025d0450/. Also the space thing is confusing as I have at least 450GB of unused space on my computer. anyways, when I selected the A drive for installation, the installation starts, but soon I get the following error message, "Office cannot find Office.en-us\OfficeLR.Cab. Browse to a valid installation source" .... The part saying "OfficeLR.Cab" have said different things after the Office bit every time I have made an attempt. When I select the Office.en-us sub-folder or any other folder within the folder where MS Office 2007 is saved, it says "invalid source"! I have been trying to get this sorted since 15hrs now (addictive!) and have learnt loads of things in the process, but have not managed to crack it. It might be something stupidly simple I am not aware off that is stopping it. I would really appreciate some help! Thanks a lot.. Also I am still getting used to the language, so might have many questions Also I am using Ubuntu 11.04 (tag 11.04). Also I think I don't have windows -- when my friend installed Ubuntu on my new laptop which had Windows 7, he was trying to keep windows in a separate partition, but something happened and windows was not there! Looking forward to some support! Again thanks a lot

  Read the article

• kubuntu: wireless manager can't find any networks

  - by timuçin

  I just installed Kubuntu 12.10 and as I knew my wireless driver would not be recognized, I installed it manually through here. I suppose I shall mention that I also had to do this. The driver worked just fine until I restarted my system. Since then I can't even start over. My wireless card is realtek 8723 The oly lead I have is this piece of log: 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> wpa_supplicant started 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0) supports 4 scan SSIDs 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0): supplicant interface state: starting -> ready 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <warn> Trying to remove a non-existant call id. 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0): supplicant interface state: ready -> inactive 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0) supports 4 scan SSIDs I feel really bad that I have been trying so many things and even while I am trying them I get a problem at every step. I am really frustrated. You can the time in the logs, I didn't get up early. Just needed to share my feelings. Even the ethernet cable I have use is short for God's sake, I have had to sit at this massively uncomfortable posture for hours. edit: I discovered something interesting. When I boot my windows I see that my wireless manager says "disconnected" now. However when I start ubuntu after windows and modprobe rtl8723e wireless works just fine. Then again, when I restart ubuntu I am back where I have started. So now I have to start windows, restart my machine and do the modprobe thing to see wireless networks.

  Read the article

• Understanding exceptional cases

  - by Justin

  I've been studying the use of exceptions in various php projects (such as Doctrine and Zend Framework). Exceptions seem to be thrown when unordinary input/state occurs. A perfect example is Doctrine throwing an exception when you try to use a invalid query string. I think the creators of the doctrine api understood that first, you can't query data by using an invalid DQL statement, and a developer should immediately be warned that an error has occurred, rather then letting execution continue with the possibility of an error code going un-checked. I also bet that this simplifies reading the code. I can't think of a situation where you would want to use an invalid DQL statement, except unit testing. Since this is true, it's better to avoid plaguing a bunch of code with null/error checks and use exceptions. I've read in books that exceptions shouldn't be thrown when validating dating user input. I've seen examples where of where the guideline is broken. One example is the Zend framework. If supplying an invalid controller or action name, an exception is thrown. Unlike doctrine, the user has more direct control over this sort of input. I know you can configure an error controller and set up a 404 message or what have you, but I'm curious why they have used an exception in this scenario? I guess you can argue the Zend Framework does not know how to continue processing the quest. One last example Is I wrote a function to return some html based on a given resource type. This resource type is hard-coded and sent when a user interacts with a web site (such as clicking a button to display the form to input data). I don't expect users to be mucking around with the request type. Under normal operating conditions, the resource type should be valid. To clean up some logic, I was going to throw an exception if a particular form wasn't found. This is mainly to find the correct form associated with a resource type so proper validation can occur. Does this sound like a valid use case for an exception? Right now it's pretty trivial, but I do plan to implement a restful consumer and re-using a function to map resources to their validation services would be very useful. I can then catch the exception and based on the consumer, return an error message suitable for the request type...

  Read the article

• Legal concerns with orchestrating a music submission contest

  - by Amplify91

  My team and I are getting pretty far along in the development of our latest game and have been thinking about audio. We decided to host an audio submission contest where we will offer a little cash and some equity stake in the game as prizes. We are also giving away copies of the game to participants. We hope not only to find audio for our game, but to meet some cool sound artists and promote the game a bit through the process. First of all, is this even a good idea? What are some potential dangers in doing this? Will it even be well received among artists? Secondly, I wrote up some Terms and Conditions in my best legal-speak to try to protect us and clarify how the contest will be run. Are these sufficient to make sure everyone involved is treated fairly and is legally protected? They are as follows: All submissions (The Submission) must be licensed under a Creative Commons Attribution 3.0 Unported License (CC-BY-3.0) By applying a CC-BY-3.0 license, you (The Submitter) expressly give Detour Games (and all members wherein) permission to copy, distribute, transmit, modify, adapt, and make commercial use of The Submission. The Submitter must own all rights to The Submission and be within their rights to license it as specified and submit it. The Submitter claims responsibility for the legality of The Submission. If The Submission is found to infringe on the rights of a person or entity other than those of The Submitter, Detour Games will not be held liable as all responsibility and liability for the legality of The Submission is that of The Submitter's. No more than two free copies of The Game per submitter. All flat cash prizes will only be disbursed pending the success of our first $5,000 Kickstarter campaign. These prizes will be disbursed 30 days after Detour Games receives the Kickstarter funds. All equity prizes (percentage of profits) are defined as the given percent of total profits after costs for a period of one year (12 months) after the release of RAW. These prizes will be disbursed semi-annually. All prize money will be disbursed through either an electronic fund transfer through a service such as PayPal or by a mailed money order. It is The Submitter's responsibility to cooperate with Detour Games in the disbursement of the funds. Detour Games reserves the right to change these Terms and Conditions at any time without notice. By participating in the contest, The Submitter agrees to and accepts all terms and conditions listed. What else could I do (legally) to protect everyone involved?

  Read the article

< Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >