Search Results

Search found 2042 results on 82 pages for 'booting'.

Page 3/82 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Arch Linux shows a blinking cursor instead of a booting installer

    - by fakedrake
    Arch Linux shows a blinking cursor instead of a booting installer. I ran sudo dd if=archlinux-2010.05-core-i686.iso of=/dev/sdb1 and checked the MD5 sums. I tried to boot it on two different PCs and got the same result: instead of booting GRUB — or anything useful, for that matter — it just showed a blinking cursor at the top left corner of the screen. The machines became unresponsive to any kind of input, the flash drive LED didn't seem to blink or shiver at all and there seemed to be no other activity whatsoever. I tried using another flash drive, but the machine completely ignored it, booting Windows "normally."

    Read the article

  • Booting a GPT USB key on older BIOS laptop

    - by fonix232
    I have an old HP EliteBook 8530p, which does not support booting from GPT USB (GPT HDDs are fine though). Lately I had the wish to have a fast-to-start OS for browsing, smaller web tasks, etc., so I grabbed a ChromeOS build (latest one by ArnoldTheBat), flashed it on an 8GB flash drive, and popped it in. It did not boot, so I dug deeper and discovered that it actually is GPT, and cannot be converted to MBR. As my laptop does not support UEFI booting from USB (there's a really-really beta UEFI support in the BIOS, but as I said, it only supports GPT hard drives, not USB devices), I'm stuck. Is there any way of booting it, say, another flash drive with a specific boot loader/manager (e.g. Plop)?

    Read the article

  • Windows 8 not booting from DVD while trying to install in a Ubuntu 14.04 system

    - by Tom
    Currently my system runs on Ubuntu 14.04. Yesterday, I deleted and formatted the partition(C drive) as NTFS in which Windows 7 was installed because Windows 7 was not booting for more than a week. I have a Windows 8 disk and it was able to boot from that disk when there was Windows 7 on my system. After the formatting of C drive yesterday, I tried to install Windows 8 by booting from the disk. Unfortunately, this time no booting happened from the disk. So I pressed F2 during the system start up and checked Boot Device Priority, Optical Drive has the first priority there. So why Windows 8 didn't boot from the disk ? I need to install Windows 8 too in my system without doing any damage to Ubuntu 14.04. How can I do it ?

    Read the article

  • Dual booting on separate hard drives

    - by tornadorider
    I have windows XP professional installed on 1 hard drive and Ubuntu 10.10 on my second hard drive. On start up the computer completely skips the grub menu and boots straight into 10.10. I have tried running os-prober with the windows hard drive mounted and then updating grub but it didnt work. Any ideas? I have changed the boot order so that the HDD with xp on it is first however the computer still booted into linux. I tried running grub-install /dev/sda and got this /usr/sbin/grub-setup: warn: Sector 32 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track.. /usr/sbin/grub-setup: warn: Sector 33 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track.. Installation finished. No error reported I checked using disk utility and the code for my xp hard drive is sdb so i ran the camand grub-install /dev/sdb shich gave me this Installation finished. No error reported. So i rebooted but it still didnt work. Any other ideas? Additional info gedit /boot/grub/grub.cfg: # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-28-generic ...' linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### sudo fdisk -l: Disk /dev/sda: 80.1 GB, 80060424192 bytes 255 heads, 63 sectors/track, 9733 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0008a483 Device Boot Start End Blocks Id System /dev/sda1 * 1 9352 75112448 83 Linux /dev/sda2 9352 9734 3068929 5 Extended /dev/sda5 9352 9734 3068928 82 Linux swap / Solaris Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc5d6c5d6 Device Boot Start End Blocks Id System /dev/sdb1 1 60800 488375968+ 7 HPFS/NTFS sudo blkid /dev/sda1: UUID="d682c9bd-dd89-4827-9802-a1f921ebe21c" TYPE="ext4" /dev/sda5: UUID="09e9c2cb-d903-4f0b-a181-536951845231" TYPE="swap" /dev/sdb1: UUID="B21844EB1844AFE1" TYPE="ntfs" sudo os-prober (nothing) Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #1 for (,msdos1)/boot/grub. => Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in partition #1 for (,msdos1)/boot/grub. sda1: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 10.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda2: _________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows XP Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files/dirs: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 80.1 GB, 80060424192 bytes 255 heads, 63 sectors/track, 9733 cylinders, total 156368016 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 2,048 150,226,943 150,224,896 83 Linux /dev/sda2 150,228,990 156,366,847 6,137,858 5 Extended /dev/sda5 150,228,992 156,366,847 6,137,856 82 Linux swap / Solaris Drive: sdb ___________________ _____________________________________________________ Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdb1 * 63 976,751,999 976,751,937 7 HPFS/NTFS blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 d682c9bd-dd89-4827-9802-a1f921ebe21c ext4 /dev/sda2: PTTYPE="dos" /dev/sda5 09e9c2cb-d903-4f0b-a181-536951845231 swap /dev/sda: PTTYPE="dos" /dev/sdb1 B21844EB1844AFE1 ntfs /dev/sdb: PTTYPE="dos" ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sda1 / ext4 (rw,errors=remount-ro,commit=0) =========================== sda1/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-28-generic ...' linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. menuentry "Windows XP" { set root=(hd1,1) chainloader (hd1,1)+1 } ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sda1/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=09e9c2cb-d903-4f0b-a181-536951845231 none swap sw 0 0 =================== sda1: Location of files loaded by Grub: =================== 51.7GB: boot/grub/core.img 58.5GB: boot/grub/grub.cfg 1.2GB: boot/initrd.img-2.6.35-22-generic 1.3GB: boot/initrd.img-2.6.35-28-generic 58.2GB: boot/vmlinuz-2.6.35-22-generic 51.7GB: boot/vmlinuz-2.6.35-28-generic 1.3GB: initrd.img 1.2GB: initrd.img.old 51.7GB: vmlinuz 58.2GB: vmlinuz.old =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on sda2 00000000 d9 ed 13 ab ff a8 33 8c 01 b2 47 99 e1 4a b1 f1 |......3...G..J..| 00000010 69 5f a7 29 a4 1a 03 9e 31 b9 45 02 71 e6 58 78 |i_.)....1.E.q.Xx| 00000020 3d f6 ee 7b 3e 33 1b 82 c6 7d cf 1a c8 e7 bc 2f |=..{>3...}...../| 00000030 b9 e1 70 75 cf 18 aa e7 d5 7e 3c f1 b4 e7 9e 3a |..pu.....~<....:| 00000040 55 38 f1 b4 ee 78 59 0b 5e f7 3c 4c 57 73 9c 2a |U8...xY.^.<LWs.*| 00000050 28 f1 19 ed 11 9c b2 19 e2 80 92 1c 7b 84 ee 0b |(...........{...| 00000060 e2 c0 ac af 0a 50 42 b9 cf 0c dc 2c 20 77 85 dc |.....PB...., w..| 00000070 8f 70 5f 7b 84 9b a1 f7 8c 2d ee 70 5c ae f7 39 |.p_{.....-.p\..9| 00000080 63 f7 09 8a ec 79 4c ed 9f cc ad 3c f8 1b 47 7d |c....yL....<..G}| 00000090 3f 97 d5 16 cb 29 45 38 25 61 36 08 de 10 93 0f |?....)E8%a6.....| 000000a0 95 4f ea 54 f9 89 ff f1 bf 9a cc bb fd b6 22 b1 |.O.T..........".| 000000b0 65 08 05 21 78 19 46 b0 24 7e fb de d4 b3 ba d6 |e..!x.F.$~......| 000000c0 ec 11 65 82 ee 10 1d 12 04 91 da 6d 67 47 ea 9b |..e........mgG..| 000000d0 6f b0 aa fb cb 67 10 64 86 e8 26 85 fb f9 50 77 |o....g.d..&...Pw| 000000e0 9d 13 9b 9e d9 11 f3 a1 50 1b 11 b7 93 79 9f ab |........P....y..| 000000f0 c1 b6 86 0f 35 ed d4 9f dc f8 db bd ed 45 3a 68 |....5........E:h| 00000100 54 68 4a 1d d1 fc b8 c9 72 b4 d7 7b 60 e7 39 2f |ThJ.....r..{`.9/| 00000110 2a 0a 4e 52 72 52 c6 e2 2a 55 6a 2a e1 82 40 71 |*.NRrR..*Uj*..@q| 00000120 11 11 e0 53 d6 ff 1b a9 c6 65 df 1e b7 15 6f a2 |...S.....e....o.| 00000130 15 02 a4 6d 19 b7 78 57 a6 ee 9e 36 08 7d 6f 7c |...m..xW...6.}o|| 00000140 fd f7 7c d5 40 ff 0f c7 97 dc aa 00 ce 8b bb dc |..|.@...........| 00000150 e2 eb 1c 50 74 d8 14 cc 9a d6 5c a2 ab f2 67 f9 |...Pt.....\...g.| 00000160 58 ed 43 79 0e 78 7a 5c a6 f8 7b e8 05 4e 62 8a |X.Cy.xz\..{..Nb.| 00000170 0a 5f 22 ee a6 38 b9 e1 32 45 97 08 cc 75 66 c6 |._"..8..2E...uf.| 00000180 b3 a2 2d 89 a1 e9 95 21 28 53 fd dd be b1 b2 a2 |..-....!(S......| 00000190 78 3f a3 c9 3d e3 31 54 88 cf 78 0d e1 21 a8 74 |x?..=.1T..x..!.t| 000001a0 06 60 9d 21 c6 7a 24 e1 cc 28 f8 98 e0 99 e3 fc |.`.!.z$..(......| 000001b0 fa 8b eb d5 56 03 20 b8 54 ba c6 ee 9f 57 00 fe |....V. .T....W..| 000001c0 ff ff 82 fe ff ff 02 00 00 00 00 a8 5d 00 00 00 |............]...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200

    Read the article

  • Grub rescue: unknown filesystem erro while booting from USB

    - by Dilip Kumar
    I'm currently using ubuntu 12.04 which has grub2 and wanted to install windows 8 from my USB, i also created a bootable usb flash drive using windows 7 dvd download tool, the problem is - I formatted my hard drive and whenever i try to boot from the flash drive i get an error "error: unknown filesystem" and gives grub rescue prompt, since my dvd drive is not working the only way for me to install win8 is from USB,can anybody help me with this?

    Read the article

  • Having problems booting xubuntu after installation

    - by lagaffenewbe
    I'm newbie with ubuntu, I tried to install ubuntu, at the beginning xubuntu work for the first upgrade to xubuntu 12.04, but after the reboot, no winxp media center ether Xubuntu won't start and I have a screen Ctrl+Alt+Del nothing else. I read a little about, maybe the sata enabled on the bios. What is the problem and can it be fixed or do I have to remove xubuntu. Partition is : 100gb xubuntu 220gb winxp I have an external drive 1 tb Thanks for the help.

    Read the article

  • Booting the liveCD/USB in efi mode fails on tablet xe700t1a

    - by F.L.
    My tablet is Samsung Series 7 Slate (xe700t1a-a02fr). It operates an intel sandy bridge architecture. The main issue about this tablet is that it ships with a windows 7 install in (U)EFI mode (GPT partition table, etc.), so I'd like to get an EFI dual boot with Ubuntu. But it seems I can't boot on the liveCD in EFI mode. It starts loading (up to initrd), but I then get a blank (black) screen. I've tried the nomodeset kernel option (as well as removing quiet and splash) with no luck. I have used the 12.04.1 desktop iso (I have read somewhere that it is the only one that can boot in EFI mode). What are the other leads I can follow ? thanks

    Read the article

  • Booting Ubuntu Failure : error: attempt to read or write outside of disk 'hd0'

    - by never4getthis
    I have installed ubuntu 12.10 in a WD external harddrive (320GB). This is a complete installation, not live USB. When I plug it in my HP desktop I go to the BIOS settings and boot off the harddrive, everything work perfectly -as it should. Now this works on everysingle computer and laptop in my house (all HP) -except for ONE. My HP ProBook 4530s. When I select to boot of the USB I get the Message: error: attempt to read or write outside of disk 'hd0' Now, I have removed the hdd from my laptop and the external drive is the ONLY drive plugged in. Bellow is a picture of the screen. After the message I navigate to ls / (as shown below): After here I try to acces other folders under ls /, for example, I try to go to ls /boot to get to the grub folder. Then I get the same message as before: as shown by the image below: The only folders I can access without getting the message again are /home, /run and /usr. So how do I: Boot Ubuntu from GRUB2 (this screen) manually Set to automatically boot Ubuntu If possible an explanation for this problem Thanks!

    Read the article

  • Can't open a separate usbdrive when booting from a liveusb install 12.10

    - by Hulgerorsh
    My problem is using a separate flash drive when running from my live usb of ubuntu 12.10. The problem is that when I choose to Try Ubuntu from this usb drive it no longer lets me access my other flash drive. It automatically sets it to part of the live usb but it's a completely separate flash drive.Ubuntu loads fine and everything but when I go to access my other flash drive nothing happens. When I try to open it from the home folder it gives me Unable to mount 3.5 volume Adding read ACL for uid 999 to media/ubuntu failed: Operation not supported message. My live usb is on a 8gb flash drive and my other flash drive is 4g.

    Read the article

  • ISO booting with grub2 in Ubuntu on an Apple

    - by Robert Vila
    I have Ubuntu with grub2 installed in an Apple Macbook pro with dual boot (using rEFIt), and I would like to use grub2 to boot the LiveCD ISO image of a system based in Debian too (CrunchBang). The ISO image is saved in the same hard disk, same partition as Ubuntu. I can easily boot many other LiveCD ISO images, but I cannot boot this one, and I cannot boot the MacOS system, from the grub menu, either. The installation of Ubuntu left a couple of menu entries to boot MacOS, but they never worked. SO I don't know if it is possible to boot them, and how. I have tried many options, but the menuentry I am trying now to boot crunchBang is this one: menuentry "crunchbang-10-20120207-i386.iso" { set isofile="/home/user/Desktop/ISO/crunchbang-10-20120207-i386.iso" loopback loop (hd0,3)$isofile linux (loop)/live/vmlinuz1 iso-scan/filename=$isofile toram=filesystem.squashfs findiso=$isofile boot=live config -- initrd (loop)/live/initrd1.img } And I copied it from here: http://linux4netbook.blogspot.com.es/2012/08/due-crunchbang-e-un-pennino.html

    Read the article

  • Booting from USB on Mac Air (using setup_mac_usb_boot.sh)

    - by Mike O
    So, I've been working on this for hours and it's getting a little tiring. As some of you may know, installing Ubuntu on Macs is frequently an adventure, and I'm experiencing that right now. The part I'm hung up on at the moment is making a bootable USB. I would just use a CD, but my laptop is a MacBook Air (which doesn't have a CD drive), and I don't own an external CD drive. I initially attempted to use the command line method supplied by the Ubuntu documentation here: https://help.ubuntu.com/community/How%20to%20install%20Ubuntu%20on%20MacBook%20using%20USB%20Stick However, that wasn't even recognized by rEFIt even when I made a number of different modifications to the process, so I quickly decided to look elsewhere. I came across this guide: https://help.ubuntu.com/community/MacBookAir4-2#Basic_Installation_Instructions This ended up working to a large extent. If I choose the supplied grub from rEFIt, it will bring me to the Ubuntu grub, asking me to try it, install, or check the disk. And if I choose to boot Linux directly from rEFIt, it will bring me to the language selection menu. But when I make my selection from either of these menus it pauses for about ten seconds and then gives me a command line error message. It begins with kernel panic - not syncing timer doesn't work through interrupt, and then shows about eight file names. Does anyone here have any ideas as to what can be causing this? I also tried the script with both Ubuntu 11.10 (the current version when the script was written) and 12.04.

    Read the article

  • Problem booting Windows after failed installation Ubuntu 12.04 alongside Windows 7

    - by Tassos
    I tried to install in my laptop Ubuntu 12.04 so that I can dual-boot with Windows 7. I made some mistakes during this process and I didn't manage to install Ubuntu. But my real problem now is that I'm afraid that I also destroyed the installation of Windows 7. Your help would be precious for me. Here are the details of what I did: 1) I followed these instructions to dual boot Ubuntu 12.04 and Windows 7: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/ The only difference from what is described above, is that in my case the device names where: /dev/mapper/isw_fdjdhbadc_Volume0* instead of: /dev/sda* Note that I had created a bootable USB stick to do that. 2) The installation proceeded normally, but in the end I got a fatal error because the grub-install failed. 3) Then, after googling this problem, I runned ubuntu from the USB stick and run this command: sudo grub-install --root-directory=/home/ubuntu/temp /dev/mapper/isw_fdjdhbadc_Volume0p5 (/isw_fdjdhbadc_Volume0p5 was the partition that I had made for /boot) but this command also failed. 4) Then, I did something stupid (I think): I run the above command as: sudo grub-install --root-directory=/home/ubuntu/temp /dev/mapper/isw_fdjdhbadc_Volume0 namely I tried to install grub in the device isw_fdjdhbadc_Volume0 instead of the boot partition isw_fdjdhbadc_Volume0p5 The above command did not fail and was executed ok. 5) After that, I tried to boot my laptop, but it seemed that I had no operation system. Not even windows were detected. 6) I thought that I should uninstall grub from isw_fdjdhbadc_Volume0. So following some online instructions that I found, I booted again Ubuntu from the USB stick and run the following command (this was stupid since the instructions were for a totally different case than mine): sudo dd if=/dev/zero of=/dev/mapper/isw_fdjdhbadc_Volume0 bs=446 count=1 Afte that, I was still unable to boot Windows. I realize that I deleted something that I shouldn't, but I'm hope that this is not crucial and I can recover somehow. When I boot Ubuntu from the USB, I can see that the partition with Windows is still there, with all the directories, Windows files, my data etc. So, my question is: Is there a way to undo the mistakes that I desribed above and recover Windows 7? This is my major question. After solving that, I'd also like to know what I did wrong with the installation of Ubuntu. Thanks in advance for you valuable help!

    Read the article

  • System displays "File system maintenance error, press ctrl+d" while booting

    - by user3215
    In my office I've Ubuntu 8.10 desktop installed and it's running for a long time. When ever the system is started, I'll get a file system maintenance error and something it's prompted for the root password or (press ctrl+d to continue). After pressing Ctrl+D the system normally boots up. I could not resolve this issue for a long time and I think something should be done in the fstab file. I'm not sure to do anything and expecting the experts here to help to perfectly fix this. Any help is appreciated. Thanks!

    Read the article

  • Ubuntu 12.10 64 bits not booting on a Dell Inspiron 15z Puissance (French) in UEFI mode

    - by NicoGuich
    When trying to start Ubuntu from my USB key in UEFI mode (it works in Legacy mode, but I have to keep Windows) on a Dell Inspiron 15z , Grub starts, but when I choose any option, I get a black screen and my USB key stop teling me it is being read. EDIT: when using the legacy mode and trying to install Ubuntu, I get a blank partition table with Ubiquity… … and a very strange partition table from GParted (I have a hybrid 32Go SSD + 500Go HDD disk) :

    Read the article

  • Xen 4.0.1 on Ubuntu 10.10 not booting

    - by Disco
    I'm trying to get Xen 4.0.1 run as dom0 on a fresh/clean install of 10.10 desktop (x64). Followed the step by step tutorial at http://wiki.xensource.com/xenwiki/Xen4.0 I have the pvops kernel in /boot, also included the ext4 fs support by recompiling the kernel by : make -j6 linux-2.6-pvops-config CONFIGMODE=menuconfig make -j6 linux-2.6-pvops-build make -j6 linux-2.6-pvops-install Here's my grub entry : menuentry 'Xen4' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 insmod ext3 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set 2bf3177a-92fd-4196-901a-da8d810b04b4 multiboot /xen-4.0.gz dom0_mem=1024M loglvl=all guest_loglvl=all module /vmlinuz-2.6.32.27 root=UUID=2bf3177a-92fd-4196-901a-da8d810b04b4 ro module /initrd.img-2.6.32.27 } blkid /dev/sda1 gives the : /dev/sda1: UUID="2bf3177a-92fd-4196-901a-da8d810b04b4" TYPE="ext3" My partition shemes is : /boot (ext3) / (ext4) Whatever option i've tried i end up with : mounting none on /dev failed: no such file or directory And message complaining that it cannot find the device with uuid ... It's taking my hairs out, if somone has a clue ...

    Read the article

  • Purple Screen then Black Screen while Booting from CD or Windows Install

    - by Tyler
    Whenever I try to run Ubuntu from my internal CD drive, I see this screen minus the Ubuntu Text: Then the screen goes black, not even the internal light stays on. Sometimes it restarts itself, other times the black screen is indefinite until I restart the laptop myself. I'm on an HP Quad-Core AMD A8-3500M APU with 8 GB RAM and a Radeon AMD 6620g Discrete-Graphics Card. (HP dv6-6145dx) This is my first time using Linux, I am not too technically-inclined so any simplification would be welcomed. I am good at following technical instructions though which is how I was able to partition my hard drive and change the boot order to allow the internal CD drive first. Thanks in advance!

    Read the article

  • Save kernel on Acer Aspire One270 with Ubuntu 12.10 - Booting Issues

    - by Sascha Klocke
    I did search the forums for quite some time, yet did not find any answer to my problem... I have an Acer Aspire One D270 with Windows 7 Starter and I've installed Ubuntu using the Wubi installer. When I boot to Windows 7, everything works fine, however, when I try to run Ubuntu, it gets stuck on a black screen at stopping kernel messages (or other lines), followed by some lines with [ 20.....] and won't continue... Could anyone point me to a solution to this problem?

    Read the article

  • Updated Intel display driver causing errors when booting

    - by cdysthe
    I upgraded to to Graphics Installer 1.0.6 on my Ubuntu 14.04 and installed the drivers using the Intel Graphics Installer. The laptop is Intel Ivybridge powered with Intel HD graphics. It Optimus but I have disabled the Nvidia card in bios. The Intel Graphics Installer installs the package i915-3.15-3.13-dkms.deb which I assume is the updated driver. It causes a bunch of error messages when I boot. Here are the relevant errors from dmesg when I boot: [ 7.206151] drm: module verification failed: signature and/or required key missing - tainting kernel [ 7.208045] drm: module has bad taint, not creating trace events [ 7.336470] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 7.393854] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013) [ 7.393855] [drm] Driver supports precise vblank timestamp query. [ 7.393921] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 7.505798] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 [ 7.507233] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 7.944183] [drm:cpt_serr_int_handler] ERROR PCH transcoder A FIFO underrun [ 8.368479] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 8.368480] i915 0000:00:02.0: registered panic notifier [ 8.818416] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off What could the problem be and will it affect performance? I tried to remove the package and the errors went away but I'm then running and older driver I assume?

    Read the article

  • PXE booting on old computer

    - by kosciak
    So my computer is not working - the disk is totally cleared, I've deleted GRUB and PLOP which I used to install new system, because CD-Rom is broken and BIOS is old (whole computer is old, it's Sony Vaio PCG-GR250) so it won't allow me to do it via USB and I got no floppy drive :) the only way is to PXE boot PLOP and install Linux from USB after PLOP has been opened. (I'm not a specialist but that's how I see it) I'm using Mac OS X 10.9 and I followed number of tutorials how to set up TFTP and DHCP server and I got PLOP here, but when I boot up with PXE it says that it found DHCP but TFTP timed out. Any help or alternative way of rescuing old laptop? Thanks in advance!

    Read the article

  • Windows not booting in dual boot with Ubuntu 12.04 and Windows 7

    - by Rupa
    I have dual Ubuntu 12.04 and Windows 7 installed in my PC. I installed Ubuntu after Windows, and I have issues with GRUB. After installing Ubuntu, there was no boot loader in the start up, with an error message about missing OS. I tried boot repair, I can see the GRUB loader now and can access Ubuntu, uut I am not able to access Windows, even though I can see that in GRUB loader. I tried to fix the Windows start up with my Windows Live CD, but that removed the GRUB. What should I do in this case?

    Read the article

  • Ubuntu 12.10 stopped during booting

    - by Alberto
    Good morning, I'm very new to Ubuntu. I decided to change to Ububtu (12.10) for my old laptop (Compaq Presario R3000 with AMD Athlon XP 2800+) that previously used Windows XP. After the installation, the PC restarted but, after a certain activity of the HDD stopped. Menwhile, no information from the screen (blank). Then I retried in recovery mode and the activity stopped at a certain point. I write the last two lines: [ 11.020922] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x7fff: [ 11.021676] excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff 0x3c00-0x3cff I don't know how to solve the problem. Thanks in advance for the help.

    Read the article

  • Sony VAIO is booting directly into Windows without showing grub

    - by Rohan Dhruva
    I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

    Read the article

  • grub2 loopback booting ubuntu server iso

    - by Thermionix
    I've got usb-keys setup to multi-boot different linux images using grub2 loopback. The standard ubuntu release isos boot fine, however when attempting to use the server iso it will fail to install saying 'unable to detect cd-media for installation'. the grub.cfg entry; menuentry "ubuntu-12.04-server-amd64" { set isofile="/boot/ubuntu-12.04-server-amd64.iso" loopback loop $isofile linux (loop)/install/vmlinuz file=$isofile/preseed/ubuntu-server.seed ro noprompt noeject -- initrd (loop)/install/initrd.gz } I've attempted to add the following parameters as the fromiso works for debian images on the key iso-scan/filename=/boot/ubuntu-12.04-server-amd64.iso iso-scan/filename=/dev/disk/by-uuid/2859-44B7/boot/ubuntu-12.04-server-amd64.iso fromiso=/dev/disk/by-uuid/2859-44B7/boot/ubuntu-12.04-server-amd64.iso

    Read the article

  • Systems Not Booting after Ubuntu installation

    - by moros
    I recently installed Ubuntu on my PC dual-booted with Windows 7. After rebooting it went through the usual startup screens, but the OS selection screen never shows up. I cannot get either system to boot. I have formatted the partition holding the Ubuntu to no avail and I really don't want to get rid of Windows. I am currently stuck using the Live session disk to boot. Any help is greatly appreciated.

    Read the article

  • Please help ubuntu or any other linux os is not booting from cd or usb

    - by Amith
    I will tell you the whole story,one night when i was using KDE on Ubuntu 10.10 Kwin crashed then i shut down the os next day when i booted it the display came completely garbled and i went to safe graphics mode ,it worked and in reinstalled the Nvidia drivers and then restarted .Then immediatly, It said No init found Busybox XX.XX then I thought ill do a fresh install I inserted the ubuntu cd provided to me by Canonical.When i pressed 'try ubuntu without installing' instead of the graphic boot screen i saw.Ubuntu 10.10 in regular text and a progress bar few seconds after that the screen was flooded with error messages first alot of white then red.I then went to my win7 installation and saw a website which told me to find a Ext3 reader and format the ubuntu partition and the swap.I did that and when i restarted. GRUB configuration not found grub> Then it took my win 7 ERD and restored 7's bootloder Xp and 7 were working i put in the livecd again,Same error,Now usin my seven,Please help geeks,Ive even tried Knoppix,Fedora,Debiane.t.c they wont boot and i want to retain my win 7 and winxp partitions,I really miss linux.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >