Search Results

Search found 130 results on 6 pages for 'hops'.

Page 3/6 | < Previous Page | 1 2 3 4 5 6  | Next Page >

• Encryption over gigabit carrier ethernet

  - by Roy

  I would like to encrypt traffic between two data centres. Communication between the sites is provided as a standard provider bridge (s-vlan/802.1ad), so that our local vlan tags (c-vlan/802.1q) are preserved on the trunk. The communication traverse several layer 2 hops in the provider network. Border switches on both sides are Catalyst 3750-X with the MACSec service module, but I assume MACSec is out of the question, as I don't see any way to ensure L2 equality between the switches over a trunk, although it may be possible over a provider bridge. MPLS (using EoMPLS) would certainly allow this option, but is not available in this case. Either way, equipment can always be replaced to accommodate technology and topology choices. How do I go about finding viable technology options that can provide layer 2 point-to-point encryption over ethernet carrier networks?

  Read the article

• Unable to access my own websites from our home

  - by user2521866

  Not sure if this is the right place to ask, but i'm gonna have a shot at it. I host a couple of websites with a webhost in the Netherlands. For a couple of days now, i've been unable to connect to them from my home network. When using tracert in the cmd screen, i'm getting a timeout after about 4-5 hops. It seems fine accessing the website from anywhere, except my home network. Other PC's around the house also fail to open the websites. I've tried 'flushing my DNS' as seen in some other topics, but to no avail just yet. One of the websites: http://bit.ly/1hbqs4J I've contacted my host about it as well, but no response yet. Trying to take control of the situation myself now for as much as I can. Regards, Dave

  Read the article

• How is a nameserver chosen when DNS resolution occurs?

  - by Richard

  I have a few domains hosted on nameservers at Zerigo. Zerigo have 5 nameservers and I have all 5 in the nameserver records for my domains. The nameservers are in different geographical locations (3 in the US, one in London, and one in Amsterdam). When someone goes to a domain of mine and the DNS resolution occurs, how will it choose a nameserver? Will it always go to the nearest geographical one? Will it go to the one with fewest hops? Will it just choose one at random? (This is assuming all 5 are functioning perfectly). Thanks EDIT: And does it make any difference which order I list the nameservers in on the domain name records?

  Read the article

• Is there a way communicate or measure levels of abstraction?

  - by hydroparadise

  I'll be the first to say that this question is a bit... out there. But here are a couple questions I bear in mind : Is abstraction continuous or discrete? Is there a single unit of abstraction? But I'm not sure those questions are truly answerable or even really makes sence. My naive answer would be something along the lines of abitrarily discrete but not necescarily having a single unit measure. Here's what I mean... Take a Black Labrador; an abstraction that could be made is that a Black Lab is a type of animal. [Animal]<--[Black Lab] A Black Lab is also a type of Dog. [Dog]<--[Black Lab] One way to establish a degree of abstraction is by comparing the two the abstractions. We could say that [Animal] is more abstract than [Dog] in respect to a Black Lab. It just so happens [Animal] can also be used as an abstraction of [Dog] So, we might end up with something like [Animal]<--[Dog]<--[Black Lab] With the model above, one might be inclined to say that there's two hops of abstraction to get from [Black Lab] to [Animal]. But you can't exactly tell somebody they need one level abstraction and reasonalby expect they will come up with [Dog] given they aren't explicity given the options above. If I needed to tell someobody in a single email that they needed an abstract class with out knowing what that abstract class is, is there a way to communaticate a degree of abstraction such that they might end up on Dog instead of Animal? As a side note, what area of study might this type of analysis fall under?

  Read the article

• Help analyzing traceroute

  - by Abdulla

  Hello, my name is Abdulla and I'm from Kuwait. Sorry for my question as I know its not technically challenging. I'm facing some problems with my internet connection. My company has a DSL 2mb connection. My main problem is latency, in the morning its good but after that its gets really bad. My Internet provider says there's nothing wrong and that everything is working perfectly. I tried to explain to them the latency issue but they say that as long as I'm getting the download speed there isn't anything I can do about it. I only want to know if this is true and that the company can't do anything before I change my internet provider, as I feel that the guys at the contact center might getting back to me without asking tech support. Below are 2 traces I made, one in the morning and the other in the afternoon: This was taken around 17:00 Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>ping google.com Pinging google.com [66.102.9.104] with 32 bytes of data: Reply from 66.102.9.104: bytes=32 time=387ms TTL=49 Reply from 66.102.9.104: bytes=32 time=388ms TTL=49 Reply from 66.102.9.104: bytes=32 time=375ms TTL=49 Reply from 66.102.9.104: bytes=32 time=375ms TTL=49 Ping statistics for 66.102.9.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 375ms, Maximum = 388ms, Average = 381ms C:\Documents and Settings\Administrator>ping google.com /t Pinging google.com [66.102.9.104] with 32 bytes of data: Reply from 66.102.9.104: bytes=32 time=376ms TTL=49 Reply from 66.102.9.104: bytes=32 time=382ms TTL=49 Reply from 66.102.9.104: bytes=32 time=371ms TTL=49 Reply from 66.102.9.104: bytes=32 time=378ms TTL=49 Reply from 66.102.9.104: bytes=32 time=374ms TTL=49 Reply from 66.102.9.104: bytes=32 time=371ms TTL=49 Reply from 66.102.9.104: bytes=32 time=365ms TTL=49 Reply from 66.102.9.104: bytes=32 time=366ms TTL=49 Reply from 66.102.9.104: bytes=32 time=353ms TTL=49 Reply from 66.102.9.104: bytes=32 time=331ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=348ms TTL=49 Reply from 66.102.9.104: bytes=32 time=365ms TTL=49 Reply from 66.102.9.104: bytes=32 time=346ms TTL=49 Reply from 66.102.9.104: bytes=32 time=335ms TTL=49 Reply from 66.102.9.104: bytes=32 time=340ms TTL=49 Reply from 66.102.9.104: bytes=32 time=344ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=328ms TTL=49 Reply from 66.102.9.104: bytes=32 time=332ms TTL=49 Reply from 66.102.9.104: bytes=32 time=326ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=325ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=338ms TTL=49 Reply from 66.102.9.104: bytes=32 time=341ms TTL=49 Ping statistics for 66.102.9.104: Packets: Sent = 26, Received = 26, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 325ms, Maximum = 382ms, Average = 348ms Control-C ^C C:\Documents and Settings\Administrator>travert google.com 'travert' is not recognized as an internal or external command, operable program or batch file. C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [66.102.9.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 6 ms 6 ms 6 ms 80-184-31-1.adsl.kems.net [80.184.31.1] 3 7 ms 7 ms 8 ms 168.187.0.226 4 7 ms 8 ms 9 ms 168.187.0.125 5 180 ms 187 ms 188 ms if-11-2.core1.RSD-Riyad.as6453.net [116.0.78.89] 6 209 ms 222 ms 204 ms 195.219.167.57 7 541 ms 536 ms 540 ms 195.219.167.42 8 553 ms 552 ms 538 ms Vlan1102.icore1.PVU-Paris.as6453.net [195.219.24 1.109] 9 547 ms 543 ms 542 ms xe-9-1-0.edge4.paris1.level3.net [4.68.110.213] 10 540 ms 523 ms 531 ms ae-33-51.ebr1.Paris1.Level3.net [4.69.139.193] 11 755 ms 761 ms 695 ms ae-45-45.ebr1.London1.Level3.net [4.69.143.101] 12 271 ms 263 ms 400 ms ae-11-51.car1.London1.Level3.net [4.69.139.66] 13 701 ms 730 ms 742 ms 195.50.118.210 14 659 ms 641 ms 660 ms 209.85.255.76 15 280 ms 283 ms 292 ms 209.85.251.190 16 308 ms 293 ms 296 ms 72.14.232.239 17 679 ms 700 ms 721 ms 64.233.174.18 18 268 ms 281 ms 269 ms lm-in-f104.1e100.net [66.102.9.104] Trace complete. C:\Documents and Settings\Administrator> This was taken at 10:00am Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>ping google.com Pinging google.com [66.102.9.106] with 32 bytes of data: Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=120ms TTL=49 Ping statistics for 66.102.9.106: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 110ms, Maximum = 120ms, Average = 113ms C:\Documents and Settings\Administrator>ping google.com /t Pinging google.com [66.102.9.106] with 32 bytes of data: Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=116ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=115ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=113ms TTL=49 Reply from 66.102.9.106: bytes=32 time=115ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Ping statistics for 66.102.9.106: Packets: Sent = 32, Received = 32, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 109ms, Maximum = 135ms, Average = 112ms Control-C ^C C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [66.102.9.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 6 ms 6 ms 6 ms 80-184-31-1.adsl.kems.net [80.184.31.1] 3 8 ms 7 ms 6 ms 168.187.0.226 4 6 ms 7 ms 7 ms 168.187.0.125 5 20 ms 20 ms 18 ms if-11-2.core1.RSD-Riyad.as6453.net [116.0.78.89] 6 171 ms 205 ms 215 ms 195.219.167.57 7 191 ms 215 ms 226 ms 195.219.167.42 8 * 103 ms 94 ms Vlan1102.icore1.PVU-Paris.as6453.net [195.219.24 1.109] 9 94 ms 95 ms 97 ms xe-9-1-0.edge4.paris1.level3.net [4.68.110.213] 10 94 ms 94 ms 94 ms ae-33-51.ebr1.Paris1.Level3.net [4.69.139.193] 11 101 ms 101 ms 101 ms ae-48-48.ebr1.London1.Level3.net [4.69.143.113] 12 102 ms 102 ms 101 ms ae-11-51.car1.London1.Level3.net [4.69.139.66] 13 103 ms 102 ms 103 ms 195.50.118.210 14 137 ms 103 ms 100 ms 209.85.255.76 15 130 ms 124 ms 124 ms 209.85.251.190 16 114 ms 116 ms 116 ms 72.14.232.239 17 135 ms 113 ms 126 ms 64.233.174.18 18 126 ms 125 ms 127 ms lm-in-f104.1e100.net [66.102.9.104] Trace complete. C:\Documents and Settings\Administrator>

  Read the article

• Code golf: find all anagrams

  - by Charles Ma

  An word is an anagram if the letters in that word can be re-arranged to form a different word. Task: Find all sets of anagrams given a word list Input: a list of words from stdin with each word separated by a new line e.g. A A's AOL AOL's Aachen Aachen's Aaliyah Aaliyah's Aaron Aaron's Abbas Abbasid Abbasid's Output: All sets of anagrams, with each set separated by a separate line Example run: ./anagram < words marcos caroms macros lump's plum's dewar's wader's postman tampons dent tend macho mocha stoker's stroke's hops posh shop chasity scythia ... I have a 149 char perl solution which I'll post as soon as a few more people post :) Have fun!

  Read the article

• Please bear with me, can someone analyze this trace route please

  - by Abdulla

  Hello, my name is Abdulla and I'm from Kuwait. Sorry for my question as I know its not technically challenging. I'm facing some problems with my internet connection while gaming, I have DSL 2mb connection. My main problem is latency, in the morning its good but after that its gets really bad. My internet provider says there's nothing wrong and that everything is working perfectly. I tried to explain to them the latency issue but they say that as long as I'm getting the download speed there isn't anything I can do about it. I only want to know if this is true and that the company can't do anything before I change my internet provider, as I feel that the guys at the contact center might getting back to me without asking tech support. Below are 2 traces I made, one in the morning and the other in the afternoon: This was taken around 17:00 Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>ping google.com Pinging google.com [66.102.9.104] with 32 bytes of data: Reply from 66.102.9.104: bytes=32 time=387ms TTL=49 Reply from 66.102.9.104: bytes=32 time=388ms TTL=49 Reply from 66.102.9.104: bytes=32 time=375ms TTL=49 Reply from 66.102.9.104: bytes=32 time=375ms TTL=49 Ping statistics for 66.102.9.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 375ms, Maximum = 388ms, Average = 381ms C:\Documents and Settings\Administrator>ping google.com /t Pinging google.com [66.102.9.104] with 32 bytes of data: Reply from 66.102.9.104: bytes=32 time=376ms TTL=49 Reply from 66.102.9.104: bytes=32 time=382ms TTL=49 Reply from 66.102.9.104: bytes=32 time=371ms TTL=49 Reply from 66.102.9.104: bytes=32 time=378ms TTL=49 Reply from 66.102.9.104: bytes=32 time=374ms TTL=49 Reply from 66.102.9.104: bytes=32 time=371ms TTL=49 Reply from 66.102.9.104: bytes=32 time=365ms TTL=49 Reply from 66.102.9.104: bytes=32 time=366ms TTL=49 Reply from 66.102.9.104: bytes=32 time=353ms TTL=49 Reply from 66.102.9.104: bytes=32 time=331ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=348ms TTL=49 Reply from 66.102.9.104: bytes=32 time=365ms TTL=49 Reply from 66.102.9.104: bytes=32 time=346ms TTL=49 Reply from 66.102.9.104: bytes=32 time=335ms TTL=49 Reply from 66.102.9.104: bytes=32 time=340ms TTL=49 Reply from 66.102.9.104: bytes=32 time=344ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=328ms TTL=49 Reply from 66.102.9.104: bytes=32 time=332ms TTL=49 Reply from 66.102.9.104: bytes=32 time=326ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=325ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=338ms TTL=49 Reply from 66.102.9.104: bytes=32 time=341ms TTL=49 Ping statistics for 66.102.9.104: Packets: Sent = 26, Received = 26, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 325ms, Maximum = 382ms, Average = 348ms Control-C ^C C:\Documents and Settings\Administrator>travert google.com 'travert' is not recognized as an internal or external command, operable program or batch file. C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [66.102.9.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 6 ms 6 ms 6 ms 80-184-31-1.adsl.kems.net [80.184.31.1] 3 7 ms 7 ms 8 ms 168.187.0.226 4 7 ms 8 ms 9 ms 168.187.0.125 5 180 ms 187 ms 188 ms if-11-2.core1.RSD-Riyad.as6453.net [116.0.78.89] 6 209 ms 222 ms 204 ms 195.219.167.57 7 541 ms 536 ms 540 ms 195.219.167.42 8 553 ms 552 ms 538 ms Vlan1102.icore1.PVU-Paris.as6453.net [195.219.24 1.109] 9 547 ms 543 ms 542 ms xe-9-1-0.edge4.paris1.level3.net [4.68.110.213] 10 540 ms 523 ms 531 ms ae-33-51.ebr1.Paris1.Level3.net [4.69.139.193] 11 755 ms 761 ms 695 ms ae-45-45.ebr1.London1.Level3.net [4.69.143.101] 12 271 ms 263 ms 400 ms ae-11-51.car1.London1.Level3.net [4.69.139.66] 13 701 ms 730 ms 742 ms 195.50.118.210 14 659 ms 641 ms 660 ms 209.85.255.76 15 280 ms 283 ms 292 ms 209.85.251.190 16 308 ms 293 ms 296 ms 72.14.232.239 17 679 ms 700 ms 721 ms 64.233.174.18 18 268 ms 281 ms 269 ms lm-in-f104.1e100.net [66.102.9.104] Trace complete. C:\Documents and Settings\Administrator> This was taken at 10:00am Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>ping google.com Pinging google.com [66.102.9.106] with 32 bytes of data: Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=120ms TTL=49 Ping statistics for 66.102.9.106: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 110ms, Maximum = 120ms, Average = 113ms C:\Documents and Settings\Administrator>ping google.com /t Pinging google.com [66.102.9.106] with 32 bytes of data: Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=116ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=115ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=113ms TTL=49 Reply from 66.102.9.106: bytes=32 time=115ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Ping statistics for 66.102.9.106: Packets: Sent = 32, Received = 32, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 109ms, Maximum = 135ms, Average = 112ms Control-C ^C C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [66.102.9.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 6 ms 6 ms 6 ms 80-184-31-1.adsl.kems.net [80.184.31.1] 3 8 ms 7 ms 6 ms 168.187.0.226 4 6 ms 7 ms 7 ms 168.187.0.125 5 20 ms 20 ms 18 ms if-11-2.core1.RSD-Riyad.as6453.net [116.0.78.89] 6 171 ms 205 ms 215 ms 195.219.167.57 7 191 ms 215 ms 226 ms 195.219.167.42 8 * 103 ms 94 ms Vlan1102.icore1.PVU-Paris.as6453.net [195.219.24 1.109] 9 94 ms 95 ms 97 ms xe-9-1-0.edge4.paris1.level3.net [4.68.110.213] 10 94 ms 94 ms 94 ms ae-33-51.ebr1.Paris1.Level3.net [4.69.139.193] 11 101 ms 101 ms 101 ms ae-48-48.ebr1.London1.Level3.net [4.69.143.113] 12 102 ms 102 ms 101 ms ae-11-51.car1.London1.Level3.net [4.69.139.66] 13 103 ms 102 ms 103 ms 195.50.118.210 14 137 ms 103 ms 100 ms 209.85.255.76 15 130 ms 124 ms 124 ms 209.85.251.190 16 114 ms 116 ms 116 ms 72.14.232.239 17 135 ms 113 ms 126 ms 64.233.174.18 18 126 ms 125 ms 127 ms lm-in-f104.1e100.net [66.102.9.104] Trace complete. C:\Documents and Settings\Administrator>

  Read the article

• Best way to represent Bit Arrays in C#??

  - by divinci

  Hi all, I am currently building a DHCPMessage class in c#. RFC is available here : http://www.faqs.org/rfcs/rfc2131.html Pseudo public object DHCPMessage { bool[8] op; bool[8] htype; bool[8] hlen; bool[8] hops; bool[32] xid; bool[16] secs; bool[16] flags; bool[32] ciaddr; bool[32] yiaddr; bool[32] siaddr; bool[32] giaddr; bool[128] chaddr; bool[512] sname; bool[1024] file; bool[] options; } If we imagine that each field is a fixed length bit array, what is : The most versitile Best practice way of representing this as a class??? OR.. how would you write this? :)

  Read the article

• cannot access a site from Mac OSX Lion but can from other machines on network?

  - by house9

  SOLVED: The issue is with the hamachi client, hamachi is hi-jacking all of the 5.0.0.0/8 address block http://en.wikipedia.org/wiki/Hamachi_(software)#Criticism http://b.logme.in/2012/11/07/changes-to-hamachi-on-november-19th/ The fix on Mac LogMeIn Hamachi Preferences Settings Advanced Peer Connections IP protocol mode IPv6 only (default is both) If you can only connect to some of your network over IPv4 this 'fix' will NOT work for you ----- A few weeks ago I started using a service - https://semaphoreapp.com I think they made DNS changes a week ago and ever since I cannot access the site from my Mac OSX Lion (10.7.4) machine (my main development machine) but I can access the site from other machines on my network ipad windows machine MacMini (10.6.8) After some google searching I tried both of these dscacheutil -flushcache sudo killall -HUP mDNSResponder but no go, I've contacted semaphoreapp as well, but nothing so far - also of interest, one of my colleagues has the exact same problem, cannot access via Mac OSX Lion but can via windows machine, we work remotely and are not on the same ISP some additional info Lion (10.7.4) cannot access site host semaphoreapp.com semaphoreapp.com has address 5.9.53.16 ping semaphoreapp.com PING semaphoreapp.com (5.9.53.16): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 Request timeout for icmp_seq 3 ping: sendto: No route to host Request timeout for icmp_seq 4 ping: sendto: Host is down Request timeout for icmp_seq 5 ping: sendto: Host is down Request timeout for icmp_seq 6 ping: sendto: Host is down Request timeout for icmp_seq 7 .... traceroute semaphoreapp.com traceroute to semaphoreapp.com (5.9.53.16), 64 hops max, 52 byte packets 1 * * * 2 * * * traceroute: sendto: No route to host 3 traceroute: wrote semaphoreapp.com 52 chars, ret=-1 *traceroute: sendto: Host is down traceroute: wrote semaphoreapp.com 52 chars, ret=-1 .... and MacMini (10.6.8) can access it host semaphoreapp.com semaphoreapp.com has address 5.9.53.16 ping semaphoreapp.com PING semaphoreapp.com (5.9.53.16): 56 data bytes 64 bytes from 5.9.53.16: icmp_seq=0 ttl=44 time=191.458 ms 64 bytes from 5.9.53.16: icmp_seq=1 ttl=44 time=202.923 ms 64 bytes from 5.9.53.16: icmp_seq=2 ttl=44 time=180.746 ms 64 bytes from 5.9.53.16: icmp_seq=3 ttl=44 time=200.616 ms 64 bytes from 5.9.53.16: icmp_seq=4 ttl=44 time=178.818 ms .... traceroute semaphoreapp.com traceroute to semaphoreapp.com (5.9.53.16), 64 hops max, 52 byte packets 1 192.168.0.1 (192.168.0.1) 1.677 ms 1.446 ms 1.445 ms 2 * LOCAL ISP 11.957 ms * 3 etc... 10.704 ms 14.183 ms 9.341 ms 4 etc... 32.641 ms 12.147 ms 10.850 ms 5 etc.... 44.205 ms 54.563 ms 36.243 ms 6 vlan139.car1.seattle1.level3.net (4.53.145.165) 50.136 ms 45.873 ms 30.396 ms 7 ae-32-52.ebr2.seattle1.level3.net (4.69.147.182) 31.926 ms 40.507 ms 49.993 ms 8 ae-2-2.ebr2.denver1.level3.net (4.69.132.54) 78.129 ms 59.674 ms 49.905 ms 9 ae-3-3.ebr1.chicago2.level3.net (4.69.132.62) 99.019 ms 82.008 ms 76.074 ms 10 ae-1-100.ebr2.chicago2.level3.net (4.69.132.114) 96.185 ms 75.658 ms 75.662 ms 11 ae-6-6.ebr2.washington12.level3.net (4.69.148.145) 104.322 ms 105.563 ms 118.480 ms 12 ae-5-5.ebr2.washington1.level3.net (4.69.143.221) 93.646 ms 99.423 ms 96.067 ms 13 ae-41-41.ebr2.paris1.level3.net (4.69.137.49) 177.744 ms ae-44-44.ebr2.paris1.level3.net (4.69.137.61) 199.363 ms 198.405 ms 14 ae-47-47.ebr1.frankfurt1.level3.net (4.69.143.141) 176.876 ms ae-45-45.ebr1.frankfurt1.level3.net (4.69.143.133) 170.994 ms ae-46-46.ebr1.frankfurt1.level3.net (4.69.143.137) 177.308 ms 15 ae-61-61.csw1.frankfurt1.level3.net (4.69.140.2) 176.769 ms ae-91-91.csw4.frankfurt1.level3.net (4.69.140.14) 178.676 ms 173.644 ms 16 ae-2-70.edge7.frankfurt1.level3.net (4.69.154.75) 180.407 ms ae-3-80.edge7.frankfurt1.level3.net (4.69.154.139) 174.861 ms 176.578 ms 17 as33891-net.edge7.frankfurt1.level3.net (195.16.162.94) 175.448 ms 185.658 ms 177.081 ms 18 hos-bb1.juniper4.rz16.hetzner.de (213.239.240.202) 188.700 ms 190.332 ms 188.196 ms 19 hos-tr4.ex3k14.rz16.hetzner.de (213.239.233.98) 199.632 ms hos-tr3.ex3k14.rz16.hetzner.de (213.239.233.66) 185.938 ms hos-tr2.ex3k14.rz16.hetzner.de (213.239.230.34) 182.378 ms 20 * * * 21 * * * 22 * * * any ideas? EDIT: adding tcpdump MacMini (which can connect) while running - ping semaphoreapp.com sudo tcpdump -v -i en0 dst semaphoreapp.com Password: tcpdump: listening on en0, link-type EN10MB (Ethernet), capture size 65535 bytes 17:33:03.337165 IP (tos 0x0, ttl 64, id 20153, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->3129)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 0, length 64 17:33:04.337279 IP (tos 0x0, ttl 64, id 26049, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->1a21)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 1, length 64 17:33:05.337425 IP (tos 0x0, ttl 64, id 47854, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->c4f3)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 2, length 64 17:33:06.337548 IP (tos 0x0, ttl 64, id 24772, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->1f1e)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 3, length 64 17:33:07.337670 IP (tos 0x0, ttl 64, id 8171, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->5ff7)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 4, length 64 17:33:08.337816 IP (tos 0x0, ttl 64, id 35810, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->f3ff)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 5, length 64 17:33:09.337948 IP (tos 0x0, ttl 64, id 31120, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->652)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 6, length 64 ^C 7 packets captured 1047 packets received by filter 0 packets dropped by kernel OSX Lion (cannot connect) while running - ping semaphoreapp.com # wireless ~ $ sudo tcpdump -v -i en1 dst semaphoreapp.com Password: tcpdump: listening on en1, link-type EN10MB (Ethernet), capture size 65535 bytes ^C 0 packets captured 262 packets received by filter 0 packets dropped by kernel and # wired ~ $ sudo tcpdump -v -i en0 dst semaphoreapp.com tcpdump: listening on en0, link-type EN10MB (Ethernet), capture size 65535 bytes ^C 0 packets captured 219 packets received by filter 0 packets dropped by kernel above output after Request timeout for icmp_seq 25 or 30 times from ping. I don't know much about tcpdump, but to me it doesn't seem like the ping requests are leaving my machine?

  Read the article

• Set up tunnel to HE.net and now only ipv6.google.com works, but other sites ping fine.

  - by AndrejaKo

  I'm setting up IPv6 using my router which is running OpenWRT, version Backfire 10.03.1-rc4. I made a tunnel using Hurricane Electric's tunnel broker and set it up on the router and I'm using RADVD to hand out IPv6 addresses. My problem is that on computers on the network, I can only access ipv6.google.com using a browser, but other sites seem to be loading forever and won't open in any browser. I can ping and traceroute to them fine, but can't open them with a browser. I can open any site normally with a browser from the router. Stopping firewall service on the router doesn't help, so it's probably not a firewall issue. All AAAA records resolve fine, so it's probably not a DNS issue. Computers on the network get their IPv6 addresses fine, so it's probably not a radvd issue. Similar setup worked fine for SixXs, but I'm having problems with my PoP there, so I decided to move to HE. Here are some traceroutes: From a client computer: Tracing route to ipv6.he.net [2001:470:0:64::2] over a maximum of 30 hops: 1 <1 ms 1 ms 1 ms 2001:470:1f0b:de5::1 2 62 ms 63 ms 62 ms andrejako-1.tunnel.tserv6.fra1.ipv6.he.net [2001:470:1f0a:de5::1] 3 60 ms 60 ms 63 ms gige-g2-4.core1.fra1.he.net [2001:470:0:69::1] 4 63 ms 68 ms 68 ms 10gigabitethernet1-4.core1.ams1.he.net [2001:470:0:47::1] 5 84 ms 74 ms 76 ms 10gigabitethernet1-4.core1.lon1.he.net [2001:470:0:3f::1] 6 146 ms 147 ms 151 ms 10gigabitethernet4-4.core1.nyc4.he.net [2001:470:0:128::1] 7 200 ms 198 ms 202 ms 10gigabitethernet5-3.core1.lax1.he.net [2001:470:0:10e::1] 8 219 ms * 210 ms 10gigabitethernet2-2.core1.fmt2.he.net [2001:470:0:18d::1] 9 221 ms 338 ms 209 ms gige-g4-18.core1.fmt1.he.net [2001:470:0:2d::1] 10 206 ms 210 ms 207 ms ipv6.he.net [2001:470:0:64::2] Trace complete. and another from a cliet computer Tracing route to whatismyipv6.com [2001:4870:a24f:2::90] over a maximum of 30 hops: 1 7 ms 1 ms 1 ms 2001:470:1f0b:de5::1 2 69 ms 70 ms 63 ms AndrejaKo-1.tunnel.tserv6.fra1.ipv6.he.net [2001:470:1f0a:de5::1] 3 57 ms 65 ms 58 ms gige-g2-4.core1.fra1.he.net [2001:470:0:69::1] 4 73 ms 74 ms 75 ms 10gigabitethernet1-4.core1.ams1.he.net [2001:470:0:47::1] 5 71 ms 74 ms 76 ms 10gigabitethernet1-4.core1.lon1.he.net [2001:470:0:3f::1] 6 141 ms 149 ms 148 ms 10gigabitethernet2-3.core1.nyc4.he.net [2001:470:0:3e::1] 7 141 ms 147 ms 143 ms 10gigabitethernet1-2.core1.nyc1.he.net [2001:470:0:37::2] 8 144 ms 145 ms 142 ms 2001:504:1::a500:4323:1 9 226 ms 225 ms 218 ms 2001:4870:a240::2 10 220 ms 224 ms 219 ms 2001:4870:a240::2 11 219 ms 218 ms 220 ms 2001:4870:a24f::2 12 221 ms 222 ms 220 ms www.whatismyipv6.com [2001:4870:a24f:2::90] Trace complete. Here's some firewall info on the router: root@OpenWrt:/# iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 syn_flood tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 input_rule all -- 0.0.0.0/0 0.0.0.0/0 input all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) target prot opt source destination zone_wan_MSSFIX all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED forwarding_rule all -- 0.0.0.0/0 0.0.0.0/0 forward all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 output_rule all -- 0.0.0.0/0 0.0.0.0/0 output all -- 0.0.0.0/0 0.0.0.0/0 Chain forward (1 references) target prot opt source destination zone_lan_forward all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_forward all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_forward all -- 0.0.0.0/0 0.0.0.0/0 Chain forwarding_lan (1 references) target prot opt source destination Chain forwarding_rule (1 references) target prot opt source destination nat_reflection_fwd all -- 0.0.0.0/0 0.0.0.0/0 Chain forwarding_wan (1 references) target prot opt source destination Chain input (1 references) target prot opt source destination zone_lan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan all -- 0.0.0.0/0 0.0.0.0/0 Chain input_lan (1 references) target prot opt source destination Chain input_rule (1 references) target prot opt source destination Chain input_wan (1 references) target prot opt source destination Chain nat_reflection_fwd (1 references) target prot opt source destination ACCEPT tcp -- 192.168.1.0/24 192.168.1.2 tcp dpt:80 Chain output (1 references) target prot opt source destination zone_lan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain output_rule (1 references) target prot opt source destination Chain reject (7 references) target prot opt source destination REJECT tcp -- 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain syn_flood (1 references) target prot opt source destination RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 limit: avg 25/sec burst 50 DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan (1 references) target prot opt source destination input_lan all -- 0.0.0.0/0 0.0.0.0/0 zone_lan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_ACCEPT (2 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_DROP (0 references) target prot opt source destination DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_MSSFIX (0 references) target prot opt source destination TCPMSS tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU Chain zone_lan_REJECT (1 references) target prot opt source destination reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_forward (1 references) target prot opt source destination zone_wan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 forwarding_lan all -- 0.0.0.0/0 0.0.0.0/0 zone_lan_REJECT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan (2 references) target prot opt source destination ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:68 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ACCEPT 41 -- 0.0.0.0/0 0.0.0.0/0 input_wan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_REJECT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_ACCEPT (2 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_DROP (0 references) target prot opt source destination DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_MSSFIX (1 references) target prot opt source destination TCPMSS tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU TCPMSS tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU Chain zone_wan_REJECT (2 references) target prot opt source destination reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_forward (2 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 192.168.1.2 forwarding_wan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_REJECT all -- 0.0.0.0/0 0.0.0.0/0 Here's some routing info: root@OpenWrt:/# ip -f inet6 route 2001:470:1f0a:de5::/64 via :: dev 6in4-henet proto kernel metric 256 mtu 1280 advmss 1220 hoplimit 0 2001:470:1f0b:de5::/64 dev br-lan proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev br-lan proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev eth0.1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev eth0.2 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 via :: dev 6in4-henet proto kernel metric 256 mtu 1280 advmss 1220 hoplimit 0 default dev 6in4-henet metric 1024 mtu 1280 advmss 1220 hoplimit 0 I have computers running windows 7 SP1 and openSUSE 11.3 and all of them have same problem. I also made a thread about this on HE's forum, but it seems that people there are out of ideas what to do.

  Read the article

• Django colon syntax in template tags: only in newer versions?

  - by Alan

  I just deployed an application to a new server, and although I'm using virtualenv, I had to install a new environment on the production server, which has a different architecture. Anyway, I received no TemplateSytaxErrors in development, but on the production server, I get: Exception Type: TemplateSyntaxError Exception Value: Caught SyntaxError while rendering: invalid syntax (views.py, line 25) The offending line is: {% url admin:password_change as password_change_url %} Upon removing that line, the TemplateSyntaxError hops to the next line that has a colon in it (and lets other template tags work fine). So my question is this: is there some discrepancy in versions of Python/Django that would allow or disallow the namespacing syntax? The template tags are in django-grappelli (http://code.google.com/p/django-grappelli/), so I'd rather not go through their code and rewrite all the template tags. Development server: 32-bit Debian Python 2.5.5 Django 1.2.1 Production server: 64-bit CentOS Python 2.4.3 Django 1.2.1 Any ideas?

  Read the article

• Databases and Beer

  - by Johnm

  It is a bit of a no-brainer: Include the word "beer" in a subject line of an e-mail or blog post title and you can be certain that it will be read. While there are times this practice might be a ploy to increase readership, it is not the case for this blog post. There is inspiration that can be drawn from other industries to which we, as database professionals, can apply in our industry. In this post I will highlight one of my favorite participants of the brewing industry. The Boston Beer Company started in the 1970s in Boston, Massachusetts. Others may be more familiar with this company through their Samuel Adams Boston Lager and other various seasonal beers. I am continually inspired by their commitment to mastery of the brewing process to which they evangelize frequently in their commercials. They also are continually in pursuit of pushing the boundaries of beer as we know it while working within traditional constraints. A recent example of this is their collaboration with Weihenstephan Brewery of Munich, Germany to produce the soon to be released Infinium beer. This beer, while brewed as an ale, is touted as something closer to something like Champaign - all while complying with the Reinheitsgebot. The Reinheitsgebot is also known as the "German Beer Purity Law" which was originated in 1516. This law states that beer is to consist of water, barley, hops and yeast. That's it. Quite a limiting constraint indeed. and yet, The Boston Beer Company pushed forward. Much like the process of brewing, the discipline of database design and architecture is one that is continually in process and driven by the pursuit of mastery. While we do not have purity laws to constrain us, we have many other types: best practices, company policies, government regulations, security and budgets. Through our fellow comrades, we discuss the challenges and constraints in which we operate. We boil down the principles and theories that define our profession. We reassemble these into something that is complementary to the business needs that we must fulfill. As a result, it is not uncommon to see something amazingly innovative in a small business who is pushing the boundaries of their database well beyond its intended state. It is equally common to see innovation in the use of features available in the more advanced features of databases that are found in large businesses. The tag line for The Boston Beer Company is: "Take Pride In Your Beer.", I would like to offer an alternative and say "Take Pride In Your Database." So, As you pour your next Boston Lager into a frosted glass, consider those who spend their lives mastering the craft of brewing and strive to interject their spirit into everything that you do as a database professional. Cheers!

  Read the article

• Teamcity build agent gives 504 gateway timeout

  - by Anthony

  I have a new teamcity build agent machine, which when started up tries to connect to the build server and fails. It never shows up in the connected, disconnected or unauthorised agents tabs of the build server web interface. The logs on the build agent show that it fails to connect with a 504 gateway timeout. This is from teamcity-agent.log [2012-09-04 15:34:59,776] INFO - buildServer.AGENT.registration - Registering on server http://10.0.10.16, AgentDetails{Name='my-local', AgentId=null, BuildId=null, AgentOwnAddress='10.0.1.14', AlternativeAddresses=[10.0.10.32], Port=8080, Version='21424', PluginsVersion='21424-md5-somechecksum', AvailableRunners=[ABunchOfPlugins], AvailableVcs=[SomeRunners], AuthorizationToken='sometoken'} [2012-09-04 15:35:53,606] WARN - buildServer.AGENT.registration - Call http://10.0.10.16/RPC2 buildServer.registerAgent3: org.apache.xmlrpc.XmlRpcClientException: Server returned incorrect status code: 504 Gateway Time-out [2012-09-04 15:35:53,606] WARN - buildServer.AGENT.registration - Connection to TeamCity server is probably lost. Will be trying to restore it. Take a look at logs/teamcity-agent.log for details (unless you're using custom logging). (I have edited some identifying data out of this log excerpt) But I can reach the build server. In fact, tracert shows that it is very nearby. Tracing route to TEAMCITYSERVER [10.0.10.16] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 10.0.2.1 2 <1 ms <1 ms <1 ms TEAMCITYSERVER [10.0.10.16] Trace complete. I can see a teamcity login page if I hit http://10.0.10.16 in the browser. The teamcity service is logging in as the same (local administrator) account as I used to log in and test the network. The build agent is a windows 2008 server VM hosted on Ubuntu 12.04 under Oracle VirtualBox. I have disabled firewalls on both the Windows and Ubuntu machines. Other VMS with similar configuration can connect fine and do not report this error. What can possibly be preventing this connection?

  Read the article

• Juniper EX3300 routing issue

  - by Richard Whitman

  The routing on my Juniper EX3300 does not seem to be working. My ISP's gateway is at xx.xx.xx.xx. And I have the following in the configuration: routing-options { static { route 0.0.0.0/0 { next-hop xx.xx.xx.xx; retain; } } } I can ping to my ISP's gateway from the switch. However, I can NOT ping to any other IP. When I do a traceroute (to Google.com's IP). This is what I get: traceroute to 74.125.224.69 (74.125.224.69), 30 hops max, 40 byte packets traceroute: sendto: No route to host 1 traceroute: wrote 74.125.224.69 40 chars, ret=-1 *traceroute: sendto: No route to host Do I need to enable any protocols? I guess this goes without saying, but I am kind of new to Junos. Update: This is the output from show interfaces terse | match inet: bme0.32768 up up inet 128.0.0.1/2 jsrv.1 up up inet 128.0.0.127/2 vlan.0 up up inet 10.0.1.1/24 vlan.1 up up inet xx.xx.xx.110/30 and this is the output from: show route forwarding-table: Routing table: default.inet Internet: Destination Type RtRef Next hop Type Index NhRef Netif default perm 0 rjct 36 1 0.0.0.0/32 perm 0 dscd 34 1 10.0.1.0/24 intf 0 rslv 1321 1 vlan.0 10.0.1.0/32 dest 0 10.0.1.0 recv 1319 1 vlan.0 10.0.1.1/32 intf 0 10.0.1.1 locl 1320 2 10.0.1.1/32 dest 0 10.0.1.1 locl 1320 2 10.0.1.3/32 dest 1 0:25:90:63:26:53 ucst 1331 2 vlan.0 10.0.1.255/32 dest 0 10.0.1.255 bcst 1318 1 vlan.0

  Read the article

• Why does traceroute take much longer than ping?

  - by PHP

  How to explain this? C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [64.233.189.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 7 ms <1 ms <1 ms reserve.cableplus.com.cn [218.242.223.209] 3 108 ms 135 ms 163 ms 211.154.70.10 4 * * * Request timed out. 5 2 ms * 1 ms 211.154.64.114 6 1 ms 1 ms 1 ms 211.154.72.185 7 1 ms 1 ms 1 ms 202.96.222.77 8 2 ms 1 ms 2 ms 61.152.81.145 9 1 ms 2 ms 1 ms 61.152.86.54 10 1 ms 1 ms 1 ms 202.97.33.238 11 2 ms 2 ms 2 ms 202.97.33.54 12 2 ms 1 ms 2 ms 202.97.33.5 13 33 ms 33 ms 33 ms 202.97.61.50 14 34 ms 34 ms 34 ms 202.97.62.214 15 34 ms 186 ms 37 ms 209.85.241.56 16 35 ms 35 ms 44 ms 66.249.94.34 17 34 ms 34 ms 34 ms hkg01s01-in-f104.1e100.net [64.233.189.104] Trace complete. So average time should be :1+7+108+2+1+1+2+1+1+2+2+33+34+34+35+34+34+35+34,which is a lot bigger than ping C:\Documents and Settings\Administrator>ping google.com Pinging google.com [64.233.189.104] with 32 bytes of data: Reply from 64.233.189.104: bytes=32 time=34ms TTL=241 Reply from 64.233.189.104: bytes=32 time=34ms TTL=241 Reply from 64.233.189.104: bytes=32 time=34ms TTL=241 Reply from 64.233.189.104: bytes=32 time=34ms TTL=241 Ping statistics for 64.233.189.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 34ms, Maximum = 34ms, Average = 34ms

  Read the article

• How can I forward an application with X11 in grayscale

  - by ??????? ???????????

  I am trying to run a graphical application at home and display it on a it on a laptop which is located about six routing hops away. The problem is that the connection is so slow (or rather there is so much GOOEY being transfered) that the mouse is unresponsive and it takes a "long time" to redraw the window even at a resolution of 800x600 pixels. The connection speeds are 10MBit up at home and about 1MBit down on the laptop, which I think should be sufficient for looking at some GUI in (almost) real time. Since this traffic is sent over over a secure shell, I have enabled Compression with highest CompressionLevel along with Ciphers set to blowfish-cbc. This has substantially improved the responsiveness of the application, making it nearly usable. However, my goal is to improve the performance even further by sacrificing colors and even frame rate. The application to be displayed a Qemu SDL window with a graphically-oriented OS in it. This is not strictly relevant, but perhaps there are options to tweak the SDL output which I am not aware of. A possible workaround would be to run the application in a "hidden" X server and enabling TigerVNC on that X server. This would automatically give me the benefits of an optimized VNC viewport, but the goal is to do without (reduce complexity). The question I'm asking is what are my options for reducing the data-rate generated on the server in order to make the graphical application more usable on the client. As mentioned, colors are not important and I could probably work with 5-16 fps. Both machines are running Gentoo with the software in question being: workstation X.Org X Server 1.10.4 OpenSSH_5.8p1-hpn13v10, OpenSSL 1.0.0e QEMU emulator version 0.15.1 (qemu-kvm-0.15.1) laptop X.Org X Server 1.12.2 OpenSSH_5.8p1-hpn13v10lpk, OpenSSL 1.0.0j

  Read the article

• SMB access from XP to Windows 2008 R2

  - by Pablo

  Here's the thing... I have a very slow file copy performance from Windows XP clients to Windows 2008R2 servers. Here are the facts: Windows XP to Windows 2K3: Fast Windows XP to Windows 2K8: Very Slow Windows 7 to Windows (any): Fast Despite the fact that the obvious solution would be to upgrade to Windows 7, well, we have 900 desktops so it's not an option in the short time. I have tried everything: Disabling SMB2.0, disabling security signatures, changing the TCP Window size, disabling the W2K8 auto tuning, upgraded the drivers, etc. We eliminated the network; both the server and the client are connected to the same core switch (no hops, no routers, same VLAN). Upon monitoring the network with a packet capture utility, we see that the SMB packets being exchanged between the W2K8 and the XP machines are very small packets (256 bytes); despite the fact that the MTUs are properly set (1500) and there is no fragmentation whatsoever. In fact, those SMB packets show, on the IP datagram, that the window is 65535 or close. The same trace, made using the same application but instead of using a W2K8 share uses a Windows XP share (and that goes FAST) shows SMB packets of 4096 bytes. I can post the traces if necessary. So, why does XP-W2K8 negotiation arrange for 24-bytes SMB payload, whereas the XP-XP negotiation arranges for 4096 SMB packets? Any ideas? I am running short of those...

  Read the article

• Weird routing issue

  - by Joel Coel

  I'm having some weird internet problems on campus. I know it's something simple, but it's a case where I need another set of eyes. I think I can explain the problem best by posting a tracert: Tracing route to google.com [74.125.45.147] over a maximum of 30 hops: 1 3 ms 3 ms 3 ms 192.168.8.1 2 1 ms 1 ms 1 ms elissaemily-pc.york.edu [192.168.10.5] 3 2 ms 2 ms 2 ms rrcs-76-79-19-33.west.biz.rr.com [76.79.19.33] 4 31 ms 3 ms 2 ms ge-1-1-0.lnclne00-mx41.neb.rr.com [76.85.220.109] 5 20 ms 17 ms 17 ms ge-7-3-0.chcgill3-rtr1.kc.rr.com [76.85.220.137] 6 20 ms 20 ms 19 ms ae-5-0.cr0.chi30.tbone.rr.com [66.109.6.112] 7 19 ms 19 ms 24 ms ae-1-0.pr0.chi10.tbone.rr.com [66.109.6.155] 8 26 ms 24 ms 24 ms 74.125.48.109 9 23 ms 24 ms 21 ms 216.239.46.246 10 39 ms 39 ms 55 ms 209.85.242.215 11 39 ms 39 ms 39 ms 209.85.254.243 12 39 ms 40 ms 96 ms 209.85.253.145 13 39 ms 39 ms 39 ms yx-in-f147.1e100.net [74.125.45.147] Trace complete. Note the second entry in there. Not only is the host name a student's computer, but the ip address doesn't exist. Dhcp shows that host as having a different address and you can't ping any 192.168.10.5. Yet somehow it's routing packets for us (and not very well, either — things are slow right now). The basic network routing table looks like this: Destination Subnet Mask Gateway --------------------------------------- Default Route -- 10.1.1.5 (our firewall) 10.0.0.0 255.0.0.0 -- 192.168.8.0 255.255.252.0 --

  Read the article

• Google Public DNS is not used in trace route

  - by IT researcher

  In my PC i am using google public DNS as DNS server.In Internet protocol(TCP/IP) properties i have set Preferred DNS server as 8 8 4 4 and Alternate DNS server as 8 8 8 8. According to me this DNS server should be used to resolve any request to website to its IP by using this DNS servers.(see google DNS and How Domain Name Servers Work). But when i checked trace route to a website in my PC i got following Tracing route to www.google.com [74.125.236.80] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.1.201 2 360 ms 349 ms 292 ms 122.178.216.1 3 145 ms 107 ms 148 ms 122.166.32.121 4 32 ms 53 ms 120 ms 122.166.32.9 5 45 ms 42 ms 121 ms 122.175.255.29 6 63 ms 76 ms 51 ms 182.79.255.45 7 52 ms 134 ms 61 ms 72.14.194.22 8 86 ms 59 ms 72 ms 72.14.232.202 9 106 ms 107 ms 60 ms 66.249.94.39 10 101 ms 103 ms 117 ms 209.85.249.235 11 148 ms 224 ms 276 ms 74.125.236.80 Trace complete. When i checked all these IP in who.is i found that it is of my ISP. So my question is where does Google public DNS is used? Also how come my ISP's nameserver is used even if i set google public dns as my dns server in my PC?(OR does my any settings are wrong)

  Read the article

• Is there any way for ME to improve routing to an overseas server?

  - by Simon Hartcher

  I am trying to make a connection to a gaming server in Asia from Australia, but my ISP routes my connection through the US. Tracing route to worldoftanks-sea.com [116.51.25.54]over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.1.1 2 34 ms 42 ms 45 ms 10.20.21.123 3 40 ms 40 ms 43 ms 202.7.173.145 4 51 ms 42 ms 36 ms syd-sot-ken-crt1-ge-6-0-0.tpgi.com.au [202.7.171.121] 5 175 ms 200 ms 195 ms ge5-0-5d0.cir1.seattle7-wa.us.xo.net [216.156.100.37] 6 212 ms 228 ms 229 ms vb2002.rar3.sanjose-ca.us.xo.net [207.88.13.150] 7 205 ms 204 ms 206 ms 207.88.14.226.ptr.us.xo.net [207.88.14.226] 8 207 ms 215 ms 220 ms xe-0.equinix.snjsca04.us.bb.gin.ntt.net [206.223.116.12] 9 198 ms 201 ms 199 ms ae-7.r20.snjsca04.us.bb.gin.ntt.net [129.250.5.52] 10 396 ms 391 ms 395 ms as-6.r20.sngpsi02.sg.bb.gin.ntt.net [129.250.3.89] 11 383 ms 384 ms 383 ms ae-3.r02.sngpsi02.sg.bb.gin.ntt.net [129.250.4.178] 12 364 ms 381 ms 359 ms wotsg1-slave-54.worldoftanks.sg [116.51.25.54] Trace complete. Since I think it will be unlikely that my ISP will do anything, are there any ways to improve my routing to the server without them having to intervene? NB. The game runs predominately over UDP, so I believe most low ping services are out of the question, as they rely on TCP traffic.

  Read the article

• remote telnet and email

  - by Mustafa Ismail Mustafa

  This issue has been occupying my work for the last few days and I will be understating when I say its driven me up the blasted walls. Essentially, I can ping and tracert the domain jnrcs.org and the subdomains mail.jnrcs.org and mail.jordanredcrescent.org. All three mentioned point to ip address 212.38.147.97. About 4 days ago, when we registered the domain "jnrcs.org" suddenly all external connection to the mail server from outside was lost. Not just mail, but other http based port-forwarded or natted services (such as camera surveillance and pbx services). I tried good old telnet (I'm a linux user) and I get the following output: telnet> o mail.jnrcs.org 25 Trying 212.38.147.97... telnet: Unable to connect to remote host: No route to host telnet> Tracert gives me: traceroute to mail.jnrcs.org (212.38.147.97), 30 hops max, 60 byte packets 1 192.168.1.2 (192.168.1.2) 0.869 ms 0.944 ms * 2 * * * 3 * * * 4 * * * 5 * * * 6 * 212.38.128.118 (212.38.128.118) 33.875 ms 39.187 ms 7 * * * 8 * * * 9 * * * 10 * * * 11 * * 212.38.147.97 (212.38.147.97) 67.621 ms I am stumped. Other friends from all around the world can telnet no problem. What could have possibly happened to make telnet/smtp/pop/imap/http access stop? Please bear in mind I'm primarily a developer but I [am under the delusion] that I can carry my weight in IT administration :) TIA

  Read the article

• Why is uploading to S3 so slow?

  - by Tom Marthenal

  I am using s3cmd to upload to S3: # s3cmd put 1gb.bin s3://my-bucket/1gb.bin 1gb.bin -> s3://my-bucket/1gb.bin [1 of 1] 366706688 of 1073741824 34% in 371s 963.22 kB/s I am uploading from Linode, which has an outgoing bandwidth cap of 50 Mb/s according to support (roughly 6 MB/s). Why am I getting such slow upload speeds to S3, and how can I improve them? Update: Uploading the same file via SCP to an m1.medium EC2 instance (SCP from my Linode to the instance's EBS drive) gives about 44 Mb/s according to iftop (any compression done by the cipher is not a factor). Traceroute: Here's a traceroute to the server it's uploading to (according to tcpdump). # traceroute s3-1-w.amazonaws.com. traceroute to s3-1-w.amazonaws.com. (72.21.194.32), 30 hops max, 60 byte packets 1 207.99.1.13 (207.99.1.13) 0.635 ms 0.743 ms 0.723 ms 2 207.99.53.41 (207.99.53.41) 0.683 ms 0.865 ms 0.915 ms 3 vlan801.tbr1.mmu.nac.net (209.123.10.9) 0.397 ms 0.541 ms 0.527 ms 4 0.e1-1.tbr1.tl9.nac.net (209.123.10.102) 1.400 ms 1.481 ms 1.508 ms 5 0.gi-0-0-0.pr1.tl9.nac.net (209.123.11.62) 1.602 ms 1.677 ms 1.699 ms 6 equinix02-iad2.amazon.com (206.223.115.35) 9.393 ms 8.925 ms 8.900 ms 7 72.21.220.41 (72.21.220.41) 32.610 ms 9.812 ms 9.789 ms 8 72.21.222.141 (72.21.222.141) 9.519 ms 9.439 ms 9.443 ms 9 72.21.218.3 (72.21.218.3) 10.245 ms 10.202 ms 10.154 ms 10 * * * 11 * * * 12 * * * 13 * * * 14 * * * 15 * * * 16 * * * 17 * * * 18 * * * 19 * * * 20 * * * 21 * * * 22 * * * 23 * * * 24 * * * 25 * * * 26 * * * 27 * * * 28 * * * 29 * * * 30 * * * The latency looks reasonable, at least until the server stopped responding to ping requests.

  Read the article

• Traceroute, * at first router

  - by Jérôme

  When using traceroute on my mac to check the path to any website, the first line is always 3 stars. imac:~ Jerome$ traceroute google.com traceroute: Warning: google.com has multiple addresses; using 173.194.70.113 traceroute to google.com (173.194.70.113), 64 hops max, 52 byte packets 1 * * * 2 217-168-54-101.static.cablecom.ch (217.168.54.101) 9.515 ms 8.757 ms 10.104 ms 3 172.31.208.73 (172.31.208.73) 14.512 ms 14.605 ms 14.264 ms 4 ch-zrh01b-ra1-ae-1.aorta.net (84.116.134.142) 13.587 ms 12.892 ms 13.936 ms 5 74.125.49.101 (74.125.49.101) 13.966 ms 14.850 ms 14.915 ms 6 72.14.232.120 (72.14.232.120) 26.573 ms 72.14.232.88 (72.14.232.88) 20.072 ms 19.758 ms 7 72.14.236.68 (72.14.236.68) 26.913 ms 72.14.236.20 (72.14.236.20) 26.825 ms 72.14.239.62 (72.14.239.62) 25.381 ms 8 209.85.254.118 (209.85.254.118) 22.240 ms 22.365 ms 209.85.254.112 (209.85.254.112) 24.826 ms 9 * * * 10 fa-in-f113.1e100.net (173.194.70.113) 25.715 ms 26.960 ms 25.191 ms As far as I know, * means no answer from the router. How come I have stars at the very first line ?

  Read the article

• Add Route for machine in same DC

  - by gary

  My routing table on my machine with IP of 46.84.121.243 currently looks like this - Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 46.84.121.225 46.84.121.243 21 46.84.121.224 255.255.255.224 On-link 46.84.121.243 276 46.84.121.239 255.255.255.255 On-link 46.84.121.243 21 46.84.121.243 255.255.255.255 On-link 46.84.121.243 276 46.84.121.255 255.255.255.255 On-link 46.84.121.243 276 I'm trying to access 46.84.121.239, which is my other machine in the same DC but my guess is the first rule is blocking it as it is trying to go via the gateway and failing - Tracing route to [46.84.121.239] over a maximum of 30 hops: 1 OWNEROR-9O83HBL [46.84.121.243] reports: Destination host unreachable. Trace complete. I'm doing all this via RDP and already tried changing the metric on the persistent rule with devastating consequences! Here's the persistent rule (working) - Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 46.84.121.225 1 Any help to be able to access the 46.84.121.243 would be very helpful thanks very much.

  Read the article

• Why can't I route to some sites from my MacBook Pro that I can see from my iPad?

  - by Robert Atkins

  I am on M1 Cable (residential) broadband in Singapore. I have an intermittent problem routing to some sites from my MacBook Pro—often Google-related sites (arduino.googlecode.com and ajax.googleapis.com right now, but sometimes even gmail.com.) This prevents StackExchange chat from working, for instance. Funny thing is, my iPad can route to those sites and they're on the same wireless network! I can ping the sites, but not traceroute to them which I find odd. That I can get through via the iPad implies the problem is with the MBP. In any case, calling M1 support is... not helpful. I get the same behaviour when I bypass the Airport Express entirely and plug the MBP directly into the cable modem. Can anybody explain a) how this is even possible and b) how to fix it? mella:~ ratkins$ ping ajax.googleapis.com PING googleapis.l.google.com (209.85.132.95): 56 data bytes 64 bytes from 209.85.132.95: icmp_seq=0 ttl=50 time=11.488 ms 64 bytes from 209.85.132.95: icmp_seq=1 ttl=53 time=13.012 ms 64 bytes from 209.85.132.95: icmp_seq=2 ttl=53 time=13.048 ms ^C --- googleapis.l.google.com ping statistics --- 3 packets transmitted, 3 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 11.488/12.516/13.048/0.727 ms mella:~ ratkins$ traceroute ajax.googleapis.com traceroute to googleapis.l.google.com (209.85.132.95), 64 hops max, 52 byte packets traceroute: sendto: No route to host 1 traceroute: wrote googleapis.l.google.com 52 chars, ret=-1 *traceroute: sendto: No route to host traceroute: wrote googleapis.l.google.com 52 chars, ret=-1 ^C mella:~ ratkins$ The traceroute from the iPad goes (and I'm copying this by hand): 10.0.1.1 119.56.34.1 172.20.8.222 172.31.253.11 202.65.245.1 202.65.245.142 209.85.243.156 72.14.233.145 209.85.132.82 From the MBP, I can't traceroute to any of the IPs from 172.20.8.222 onwards. [For extra flavour, not being able to access the above appears to stop me logging in to Server Fault via OpenID and formatting the above traceroutes correctly. Anyone with sufficient rep here to do so, I'd be much obliged.]

  Read the article

< Previous Page | 1 2 3 4 5 6  | Next Page >