Search Results

Search found 71021 results on 2841 pages for 'remote work'.

Page 3/2841 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • remote desktop access

    - by pnp
    I have my work system on the ip range 172.16.xx.yy, and I have my personal system on the ip range 10.0.xx.yy. Both of them, however, are on the same network of my University, but on different LANs/VLANs (i hope i used the right word here). How can I remotely connect to my work system from my PC, given that both use private IP addresses? If such a thing is not possible with current set up, what minimal changes are required for it?

    Read the article

  • Remote Desktop doesn't lock remote PC.

    - by Jeremy Luce
    I regularly use RDP to connect to my home computer (WinXP Pro SP3) from work (WinXP Pro SP3). My home computer has multiple users set up with Fast User Switching enabled. The problem is that my wife and kids are able to log in while I'm connected via RDP. There's nothing on the login screen to indicate that I'm logged in, much less a lock of some kind that prevents them from logging in. So, is there something I can do to actually lock them out while I'm connected, or at least indicate that I'm logged in?

    Read the article

  • Remote Desktop connection repeatedly aborting

    - by DerKlaus
    I connect to my workplace computer using Remote Desktop. After 1-2 minutes the application freezes to tell me after one more minute that the connection was aborted. It then reconnects. Everything works again for 1-2 minutes. Then the process repeats. Probably Forever. My coworkers do not experience such problems when connecting to the workplace. My workplace computer: Windows 7 32bit My home computer: Windows 7 64bit connected to the internet via WLAN-router with integrated ADSL modem (Linksys WAG200G) Things I already tried to fix the problem: disabled the Windows firewall disabled the other firewall reduced the MTU upgraded the firmware on the router configured port-forwarding to forward all packets to my home computer The problem remains unchanged. What could be the cause of the connection aborts? What else can I try to fix the connection? Thanks in advance.

    Read the article

  • Options for remote desktop software for helping remote users?

    - by Nick G
    I need an easy way to jump on someone elses machine to help them solve a problem. It needs to be really easy for them to install (preferably doesn't actually require an "install" but just running an exe?). It must punch through any firewalls automatically using a relay server or P2P (so Remote Desktop itself is no use to me). I've found commercial products like MeetMeNow but they're really expensive. I want something that you can either buy a cheap pack of sessions or minutes, or preferably something free. I'm not in the business of commerical support and would only use it once every couple of months perhaps.

    Read the article

  • Remote desktop solution where the desktop sharing party contacts the computer it wants to share with

    - by Kent
    I'm in a situation where I act as a sort of techinical support to my family and less techinically experienced friends. I'm looking for a remote desktop solution where it's possible to setup a "zero-install, double click an icon"-solution where the client computer contacts me so that I may interact with their desktop. The last part is important as the people in need of my help don't know how to configure their router or even the firewall software on their own computer. They are able to click an accept button when asked if a program should be able to make outgoing connections. They have many different kinds of routers, as well as software firewalls, and I rather not deal with the problem of how to connect to them using whatever as well as the actual problem they are having. It must be: Free of charge for non-commercial use. Possible to use it in a mode where the computer wanting to share its desktop should be able to make a connection to my computer. My computer has a DNS name we can use. Compatible with both Windows XP and Windows 7. Independent of a third party server or infrastructure. Explanations of the above: I don't want to spend money on it when I help them for free. If it's free as in freedom, all the better! I guess this boils down to being callable like showdesktopto.exe opscomputer.com where opscomputer.com is my computers DNS name. If that is possible then I can create a shortcut they can use to connect to me when they need help. It's nice if it's possible to specify a password or key file which I can use to authenticate myself, but it's not required. They use the OS which their machine comes installed with. That means Windows XP or 7. I want something which will work in the long run. Using a third party service which might not be available when I need it disqualified such solutions.

    Read the article

  • What to do when projects are slow and you are being held up by others?

    - by antonpug
    Where I work, projects take a significant amount of time because the teams are large, there is a lot of "design and analysis", a lot of documentation, and work always gets pushed off. I work in the middle tier and I always have to wait for the services and client folks to get their work done. Oftentimes there are weeks at a time when I can't get any work done. I feel bored and weird just sitting here scrambling to at least appear like I am busy. Management seems to do little when asked for more work. What do you do in such cases?

    Read the article

  • Remotely running batches on a Windows PC

    - by Eduardo León
    I want to remotely control my home desktop PC (running Windows 7 Professional), mainly to perform the following tasks: Downloading email attachments, and sending emails with attachments Running UI-less programs whose only inputs are files and whose only outputs are files So far, the only solution I have found is to use Remote Desktop to connect to my PC, but this is very slow and inefficient, especially when there is no fast Internet connection available other than my cell phone's. I would like to be able to send batch commands to my PC, like: Download an email attachment Use it as input for an UI-less program Save the program's output to a file Send that file to myself as an email attachment Is this possible? How could I do it?

    Read the article

  • Logmein does not work at home?

    - by Littlet-ENG
    I've been using logmein successfully for may situations and have had very good success. Our company has an Log me in Pro account. I have used this to share my desktop with customers. At work, I have had no problem with my laptop. At home, one program (solid-works) that I need to share with my customers, will not display the active screen. I spent 45 min on the phone with both the software for the cad system and logmein support with not help. I need help in narrowing down what the problem is on my computer. The support guys at Solid-works got another remote software to work, so its not the program. I can get the logmein to work at the office so its not the settings of the logmein pro account. The LMI people say its a setting on my computer.? -internet is fast enough at home -can't narrow down the problem -changed graphical settings and that didn't work. Any Suggestions?

    Read the article

  • Run Microsoft SCCM Remote Control Viewer on Client Machines?

    - by David Mackey
    I've install SCCM 2012 on a server and have successfully used the Remote Control option to take control of a system I've setup to be managed by SCCM. Now, I don't want to have to log in to a server every time I want to access this client...is there a way to run the Remote Control Viewer client on my desktop OS so I can take remote control of systems rather than having to remote in from the server? This seems like very basic functionality...but I haven't been able to figure it out thus far.

    Read the article

  • Remote execution in Workgroup network

    - by ayyob khademi
    Consider this scenario: Please don't say that it would be better if I created a Domain network; Just consider this scenario. 10 PCs are all interconnected via a switch to a workgroup network named WORKGROUP; PCs specs(all are the same): Windows XP SP2 en (build:2600.xpsp_sp2_rtm.040803-2158) I have full physical control over my own PC (one of those 10 PCs) and what I know about the other ones: IPs of all 10 PCs. Administrator account name of all 10 PCs. Administrator account password of all 10 PCs. How can I execute an application on the other PCs???(without touching them) How can modify their registry settings???(without touching them)

    Read the article

  • remote desktop computer viewer?

    - by Josh
    I would like to install a quad core computer in my dorm at college and use my much slower laptop to be able to control the quad core just as if I had a quad core laptop (control as in i see the gui, not command line control)! Both are on the same college network, though Im also interested in what would be necessary if the computers were on different networks. What would be the best method fot this? Im looking for non-lag communication.

    Read the article

  • The Work Order Printing Challenge

    - by celine.beck
    One of the biggest concerns we've heard from maintenance practitioners is the ability to print and batch print work order details along with its accompanying attachments. Indeed, maintenance workers traditionally rely on work order packets to complete their job. A standard work order packet can include a variety of information like equipment documentation, operating instructions, checklists, end-of-task feedback forms and the likes. Now, the problem is that most Asset Lifecycle Management applications do not provide a simple and efficient solution for process printing with document attachments. Work order forms can be easily printed but attachments are usually left out of the printing process. This sounds like a minor problem, but when you are processing high volume of work orders on a regular basis, this inconvenience can result in important inefficiencies. In order to print work order and its related attachments, maintenance personnel need to print the work order details and then go back to the work order and open each individual attachment using the proper authoring application to view and print each document. The printed output is collated into a work order packet. The AutoVue Document Print Service products that were just released in April 2010 aim at helping organizations address the work order printing challenge. Customers and partners can leverage the AutoVue Document Print Services to build a complete printing solution that complements their existing print server solution with AutoVue's document- and platform-agnostic document print services. The idea is to leverage AutoVue's printing services to invoke printing either programmatically or manually directly from within the work order management application, and efficiently process the printing of complete work order packets, including all types of attachments, from office files to more advanced engineering documents like 2D CAD drawings. Oracle partners like MIPRO Consulting, specialists in PeopleSoft implementations, have already expressed interest in the AutoVue Document Print Service products for their ability to offer print services to the PeopleSoft ALM suite, so that customers are able to print packages of documents for maintenance personnel. For more information on the subject, please consult MIPRO Consulting's article entitled Unsung Value: Primavera and AutoVue Integration into PeopleSoft posted on their blog. The blog post entitled Introducing AutoVue Document Print Service provides additional information on how the solution works. We would also love to hear what your thoughts are on the topic, so please do not hesitate to post your comments/feedback on our blog. Related Articles: Introducing AutoVue Document Print Service Print Any Document Type with AutoVue Document Print Services

    Read the article

  • How to Forward Local Drives to Remote Machines Using Remote Desktop

    - by Taylor Gibb
    Have you ever had a file on a flash drive that you needed to use on a machine that is situated in another building or even halfway across the world? You can do that by plugging it into your local machine and then forwarding the drive through your remote session to that machine. Here’s how to do it. Press the Windows Key and R to bring up a run box, and type mstsc to launch the Remote Desktop Connection Dialog, or you can just search for Remote Desktop in the Start Menu. Click on the arrow next to options to see some of the more advanced options. How to Make the Kindle Fire Silk Browser *Actually* Fast! Amazon’s New Kindle Fire Tablet: the How-To Geek Review HTG Explains: How Hackers Take Over Web Sites with SQL Injection / DDoS

    Read the article

  • Tweaking Remote Control (In-Kernel LIRC)

    - by Geoff
    I've recently rebuilt my MythTV box using Mythbuntu 12.04, to take advantage of newer hardware (Ivy Bridge). On my previous build I used lirc to manage the remote, i.e. the mapping of key codes - keypresses - application keys; it was quite a journey to learn it all, and I ended up fairly comfortable with how it all worked. What I have: I have a cheap Chinavasion remote and USB dongle, which I've found several articles on; these largely revolve around working with XBMC (interesting, but I don't think directly applicable) and also around getting a Harmony remote to work (it's a Chinavasion CVSB-983 - very useful, since I needed this to get my Harmony 900 working). Mythbuntu 12.04 64-bit MythTV 0.25 (likely irrelevant) How it is right now When I plug this in, it 'just works'. Which is great, except that Ubuntu uses it natively, and prevents some of the button presses from getting through to Myth. For example, I can send a button from the remote that equates to Ctrl-Alt-A (which I assume Ubuntu isn't interested in), and then trap that in Mythfrontend, but the remote's Play button is caught by Ubuntu (which displays a large circle with a line though it, as there's no media player loaded). I understand that this is because lirc is merged into the kernel now, and I like that. What I've done so far: Found the device using lsusb: $ lsusb Bus 001 Device 004: ID 073a:2230 Chaplet Systems, Inc. infrared dongle for remote Found the event device number: $ cat /proc/bus/input/devices I: Bus=0003 Vendor=073a Product=2230 Version=0110 N: Name="HID 073a:2230" P: Phys=usb-0000:00:1a.0-1.2/input0 S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5 U: Uniq= H: Handlers=sysrq kbd mouse1 event5 js0 B: PROP=0 B: EV=10001f B: KEY=4c37fff072ff32d bf54445600000000 ffffffffff 30c100b17c007 ffa67bfad951dfff febeffdfffefffff fffffffffffffffe B: REL=343 B: ABS=100030000 B: MSC=10 Tested the input with evtest (I pressed Play): $ sudo evtest /dev/input/event5 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x73a product 0x2230 version 0x110 Input device name: "HID 073a:2230" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 1 (KEY_ESC) Event code 2 (KEY_1) Event code 3 (KEY_2) Event code 4 (KEY_3) Event code 5 (KEY_4) Event code 6 (KEY_5) Event code 7 (KEY_6) <------------snipped lots of 'Event code' lines------------> Testing ... (interrupt to exit) Event: time 1336435683.230656, -------------- SYN_REPORT ------------ Event: time 1336435683.246648, type 4 (EV_MSC), code 4 (MSC_SCAN), value c00cd Event: time 1336435683.246652, type 1 (EV_KEY), code 164 (KEY_PLAYPAUSE), value 0 Event: time 1336435683.246655, -------------- SYN_REPORT ------------ Tested showkey, again for the Play key: $ sudo showkey -s kb mode was RAW [ if you are trying this under X, it might not work since the X server is also reading /dev/console ] press any key (program terminates 10s after last keypress)... 0xe0 0x22 0xe0 0xa2 What I want: I'd like a way to scan the incoming button presses, if the above method isn't correct. I'd like to either remap each button press to something that Ubuntu/Unity will ignore, or even better pass the keypress directly to Myth (I suspect this later is only possible with lirc, but I could be wrong). I would really like to do this with the in-kernel drivers, i.e. without explicitly loading lirc; if that's the way the world is going, I'd rather find a way to map the current behaviour to what I want, rather than forcing the 'old' arrangement of loading lirc outside the kernel. Learning something new is also worthwhile! My guess: I'm assuming that this will require using setkeycodes, but have had trouble finding enough information to configure this. Any help greatly appreciated!

    Read the article

  • How I Work: Staying Productive Whilst Traveling

    - by BuckWoody
    I travel a lot. Not like some folks that are gone every week, mind you, although in the last month I’ve been to: Cambridge, UK; Anchorage, AK; San Jose, CA; Copenhagen, DK, Boston, MA; and I’m currently en-route to Anaheim, CA.  While this many places in a month is a bit unusual for me, I would say I travel frequently. I’ve travelled most of my 28+ years in IT, and at one time was a consultant traveling weekly.   With that much time away from my primary work location, I have to find ways to stay productive. Some might say “just rest – take a nap!” – but I’m not able to do that. For one thing, I’m a very light sleeper and I’ve never slept on a plane - even a 30+ hour trip to New Zealand in Business Class - so that just isn’t option. I also am not always in the plane, of course. There’s the hotel, the taxi/bus/train, the airport and then all that over again when I arrive. Since my regular jobs have many demands, I have to get work done.   Note: No, I’m not always focused on work. I need downtime just like everyone else. Sometimes I just think, watch a movie or listen to tunes – and I give myself permission to do that anytime – sometimes the whole trip. I have too fewheartbeats left in life to only focus on work – it’s just not that important, and neither am I. Some of these tasks are letters to friends and family, or other personal things. What I’m talking about here is a plan, not some task list I have to follow. When I get to the location I’m traveling to, I always build in as much time as I can to ensure I enjoy those sights and the people I’m with. I would find traveling to be a waste if not for that.   The Unrealistic Expectation As I would evaluate the trip I was taking – say a 6-8 hour flight – I would expect to get 10-12 hours of work done. After all, there’s the time at the airport, the taxi and so on, and then of course the time in the air with all of the room, power, internet and everything else I needed to get my work done. I would pile up tasks at home, pack my bags, and head happily to the magical land of the TSA.   Right. On return from the trip, I had accomplished little, had more e-mails and other work that had piled up, and I was tired, hungry, and unorganized. This had to change. So, I decided to do three things: Segment my work Set realistic expectations Plan accordingly  Segmenting By Available Resources The first task was to decide what kind of work I could do in each location – if any. I found that I was dependent on a few things to get work done, such as power, the Internet, and a place to sit down. Before I fly, I take some time at home to get all of the work I’d like to accomplish while away segmented into these areas, and print that out on paper, which goes in my suit-coat pocket along with a mechanical pencil. I print my tickets, and I’m all set for the adventure ahead. Then I simply do each kind of work whenever I’m in that situation. No power There are certain times when I don’t have power available. But not only that, I might not even be able to use most of my electronics. So I now schedule as many phone calls as I can for the taxi/bus/train ride and the airports as I can. I have a paper notebook (Moleskine, of course) and a pencil and I print out any notes or numbers I need prior to the trip. Once I’m airborne or at the airport, I work on my laptop. I check and respond to e-mails, create slides, write code, do architecture, whatever I can.  If I can’t use any electronics, or once the power runs out, I schedule time for reading. I can read at the airport or anywhere, actually, even in-flight or any other transport. I “read with a pencil”, meaning I take a lot of notes, which I liketo put in OneNote, but since in most cases I don’t have power, I use the Moleskine to do that. Speaking of which, sometimes as I’m thinking I come up with new topics, ideas, blog posts, or things to teach in my classes. Once again I take out the notebook and write it down. All of these notes get a check-mark when I get back to the office and transfer the writing to OneNote. I’ve tried those “smart pens” and so on to automate this, but it just never works out. Pencil and paper are just fine. As I mentioned, sometime I just need to think. I’ll do nothing, and let my mind wander, thinking of nothing in particular, or some math problem or science question I’m interested in. My only issue with this is that I communicate tothink, and I don’t want to drive people crazy by being that guy that won’t shut up, so I think in a different way. Power, but no Internet or Phone If I have power but no Internet or phone, I focus on the laptop and the tablet as before, and I also recharge my other gadgets. Power, Internet, Phone and a Place to Work At first I thought that when I arrived at the hotel or event I could get the same amount of work done that I do at the office. Not so. There’s simply too many distractions, things you need, or other issues that allow this. Of course, Ican work on any device, read, think, write or whatever, but I am simply not as productive as I am in my home office. So I plan for about 25-50% as much work getting done in this environment as I think I could really do. I’ve done some measurements, and this holds out to be true almost every time. The key is that I re-set my expectations (and my co-worker’s expectations as well) that this is the case. I use the Out-Of-Office notices to let people know that I’m just not going to be 100% at this time – it’s hard for everyone, but it’s more honest and realistic, and I’d rather they know that – and that I realize that – than to let them think I’m totally available. Because I’m not – I’m traveling. I don’t tend to put too much detail, because after all I don’t necessarily want to let people know when I’m not home :) but I do think it’s important to let people that depend on my know that I’ll get back with them later. I hope this helps you think through your own methodology of staying productive when you travel. Or perhaps you just go offline, and don’t worry about any of this – good for you! That’s completely valid as well.   (Oh, and yes, I wrote this at 35K feet, on Alaska Airlines on a trip. :)  Practice what you preach, Buck.)

    Read the article

  • Work Time Start / Stop Tracking Software

    - by Shaharyar
    Is there a software that allows you to keep track of someones working time digitally? We are growing to an extent where we work remotely and we would like to have fixed working times. All it should do is kind of register when someone starts working (i.e. someone needs to login somewhere or set a flag.. really it could be anything) Do you have any ideas?

    Read the article

  • Which VNC for Mac to WinXP Home control?

    - by IVR Avenger
    Hi, all. I've got a MacBook and a Windows XP Home machine. I'd like to be able to connect into the XP machine from the Mac over VNC, but not through the Web method, where performance seems to be a bit iffy. I've done some research, and it seems everyone is interested in the XP-Mac connection, where I'm looking to go in the other direction. Is there a free VNC Server out there that will let me accomplish this? Thanks! IVR Avenger

    Read the article

  • Exchange 2010 remote access

    - by evesirim
    Does anyone know how to configure more addresses for remote access to Outlook on our SBS 2008? Currently you can go to either 'https://remote.site.co.uk/remote' to acces the remote web workspace or 'https://remote.site.co.uk/owa' to go straight to remote exchange access. I would like to set it up so that by going to 'https://remote.site.co.uk/exchange' it takes you to same place that '/owa' would. Does anybody know if this is possible, and if so how? Many thanks

    Read the article

  • After upgrading to 12.04 from 10.10 my mythbuntu standard MCEUSB remote no longer works

    - by keepitsimpleengineer
    I had no problems using my Windows Media Center Remote with 10.10 Mythbuntu, but after upgrading, it no longer affects Mythbuntu. I have verified and re-installed it in Mythbuntu Control Centre. I have used irw to verify the ir buttons actions are properly received by the HTPC. How do I go about fixing this? 3.2.0-26-generic (#41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012) Xorg version: 1.11.3 (16 July 2012 08:06:31PM) GCC: 4.6 (x86_64-linux-gnu) Current updates as of 2012?07?21 $cat /etc/lirc/hardware.con #Chosen Remote Control REMOTE="Windows Media Center Transceivers/Remotes (all)" REMOTE_MODULES="lirc_dev mceusb" REMOTE_DRIVER="" REMOTE_DEVICE="/dev/lirc0" REMOTE_SOCKET="" REMOTE_LIRCD_CONF="mceusb/lircd.conf.mceusb" REMOTE_LIRCD_ARGS="" #Chosen IR Transmitter TRANSMITTER="None" TRANSMITTER_MODULES="" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="" TRANSMITTER_SOCKET="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_LIRCD_ARGS="" #Enable lircd START_LIRCD="true" #Don't start lircmd even if there seems to be a good config file #START_LIRCMD="false" #Try to load appropriate kernel modules LOAD_MODULES="true" # Default configuration files for your hardware if any LIRCMD_CONF="" #Forcing noninteractive reconfiguration #If lirc is to be reconfigured by an external application #that doesn't have a debconf frontend available, the noninteractive #frontend can be invoked and set to parse REMOTE and TRANSMITTER #It will then populate all other variables without any user input #If you would like to configure lirc via standard methods, be sure #to leave this set to "false" FORCE_NONINTERACTIVE_RECONFIGURATION="false" START_LIRCMD="" # lsusb | grep -i infrared Bus 003 Device 002: ID 0471:0815 Philips (or NXP) eHome Infrared Receiver

    Read the article

  • Problem with wake after suspend using USB remote.

    - by Bod
    Hi, I'm a linux newbie looking for some help. I'm currently setting up an XBMC HTPC using a laptop and 10.10 and all works great except for waking from resume using the power button on the remote. The suspend works from remote works fine as does the resume using the power button on the laptop. I've checked /proc/acpi/wakeup which initially showed the following. Device S-state Status Sysfs node C096 S5 *disabled pci:0000:00:1e.0 C0F1 S3 *disabled pci:0000:00:1d.0 C0F8 S3 *disabled pci:0000:00:1d.1 C0F9 S3 *disabled pci:0000:00:1d.2 C0FA S3 *disabled pci:0000:00:1d.3 C0FB S3 *disabled pci:0000:00:1d.7 C102 S5 *disabled pci:0000:00:1c.0 C22B S5 *disabled pci:0000:08:00.0 C115 S5 *disabled pci:0000:00:1c.2 C22C S5 *disabled C118 S5 *disabled pci:0000:00:1c.3 C22C S5 *disabled I've since configured the above so that the S3 devices above are enabled. I've confirmed that they are the correct devices using lspci 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) None of this has worked unfortunately and I'm now stuck. It simply refuses to wakeup from the remote. The USB receiver shows no activity LED while suspended. Suspend/resume from the remote works fine from Windows 7 so I know the laptop is ok with it. Any ideas? I need to get this sorted to gain Wife Approval for this system. Thanks, Bod.

    Read the article

  • Remote Desktop advice

    - by spoon16
    Coming from Windows, so that is what my expectations are based on. I have a Ubuntu desktop edition instance running as a virtual machine on a server. I would like to use it as my primary open source dev environment but the VNC tools I have used don't seem to be as rich as "Remote Desktop Connection" in Windows. The two things that are missing for me: connecting/logging into a non-console user sessions dynamically resizing the graphical resolution based on the size of the remote desktop window device sharing (USB devices plugged into client shared with remote) Is there an appropriate client that I can run on Windows to connect to my ubuntu dev instance that provides these capabilities?

    Read the article

  • Forcing users to change password on first login - Windows Server 2008 R2 Remote Desktop Services

    - by George Durzi
    I'm setting up a demo lab environment in which each demo lab user is assigned 4 accounts to use in the lab. Users access the lab via Remote Desktop to the "client" machine in the lab - exposed at demolab.mydomain.com. The Client machine is a Windows 2008 Server R2 Enterprise Edition server The Remote Desktop Services role is configured on this server Remote Connection settings are configured to allow users to connect with any version of the Remote Desktop Client All accounts are members of the local Administrators and Remote Desktop Users groups All accounts are configured to be forced to change the default password after first login The user is instructed to remote into the lab with an account designated as their main account, and establish 3 more remote desktop sessions within the lab using their 3 other assigned demo lab accounts. When establishing the initial remote desktop connection to the lab using their main account, the user sees the change password dialog as expected. However, after logging in and trying to establish remote desktop connections to the server with their three other accounts, they are prompted that they need to change the password after logging in but can't continue with the login process - they don't see the expected change password experience. After logging in with a primary accounts, it doesn't make a difference if I try establishing a Remote Desktop connection to the environment using the name of the server, e.g. Client, or demolab.mydomain.com. I experimented with changing the settings for Remote Connections to require NLA but that didn't make a different. Appreciate any tips. Thanks

    Read the article

  • How to configure Remote desktop on window server 2008 R2?

    - by Abdullah BaMusa
    I’m trying to connect over internet to my home workstation which has Windows Server 2008 R2 (Web Edition) installed from my PC at work (Windows 7 installed on it) via Remote Desktop. I configure the workstation to accept remote desktop and I can connect to it from my laptop if I’m within same Home LAN but I can’t establish the connection from my PC at work . My question is: Is possible to connect to my workstation over internet using remote desktop? Is there any step by step resource the setup this feature?

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >