Search Results

Search found 1228 results on 50 pages for 'asus'.

Page 30/50 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• Getting VMWare ESXi 5.0.0 with RAID using the Intel X79 chipset to work

  - by Deleted

  I have bought a new server where I use the motherboard ASUS P9X79 WS X79 S-2011 ATX. It will be used for virtualization, preferably using VMware vSphere Hypervisor™ (ESXi) if I can get the RAID on my motherboard working with VMWare (it does not detect it). The motherboard has the Intel® X79 chipset, which for RAID controller means vendor ID 8086 (Intel) and model ID 2826. When I boot the ESXi 5.0.0 installation media from my flash drive I can not see drives in the RAID5 set I created. Questions: Is there a VIB file for the RAID controller I can use? I have found one article at http://www.intel.com/support/motherboards/server/sb/CS-033313.htm on getting RAID to work with some Intel controllers, it lists 9 integrated RAID modules it is comptabile with. However, there is no mention of the X79 chipset.

  Read the article

• Wireless networking on Gnome on Ubuntu 9 / 10

  - by WaveyDavey

  So here's my problem: I have some netbooks (ASUS eee, and ACER Aspire Ones) that I've been tasked to set up as kiosk machines, locked up tight for normal users. I am a command-line, server man, so this gnome malarkey is all a bit new to me. I found a lovely 9.04 kiosk livecd that installs and runs exactly as I want it to, but I can't get the wireless working. So I dropped on a full 10.4 distro, and wireless works straight out of the box (so hardware is good) - all I needed to do was right-click on the network connection icon, enter my SSID and password (WPA/WPA2) and away it went, perfect. Further investigation on 10.4 distro shows that /etc/networking/interfaces is virtually empty (just auto lo iface lo inet loopback in it), even after I have set up the wireless thru the gnome taskbar applet (is that the right word?). So where does gnome / ubuntu store the network settings to bring the blasted wireless connection up, and what do I need to do on the kiosk version to get wireless running?

  Read the article

• How to install Windows 7 onto software RAID-0

  - by Jay B

  I recently got a new laptop (Asus G73JH-A2) which has two identical hard drives in it. Unfortunately the motherboard does not have a RAID controller. What I would like to do is run the drives in a RAID-0 configuration to improve performance (plus get the extra capacity on one partition). I would like Windows installed onto the striped volume (RAID 0). I have spent some time using diskpart to create a striped volume across the two drives, however when I go to install windows and select the volume it will not let me select 'Next' giving the error "Windows cannot be installed to this hard disk space. The partition contains one or more dynamic volumes that are not supported for installation." I'm hoping theres a step that I am missing that will allow me to install windows on a striped volume. Any ideas?

  Read the article

• DD-WRT VPN error 800?

  - by MrZombie

  I have set up a router with DD-WRT Mega on my Asus WL-500gP V2, and I can't connect to the VPN service. I have set it up according to the configuration on the DD-WRT wiki, so the server IP is set to 192.168.1.1, which is the address of the router, and I set up the client addresses to be 192.168.1.20-29. My chap secrets are set up correctly, and still, I get an error 800 on windows XP. As far as I can tell, it means my network is unreachable. The server responds to ping.

  Read the article

• How do I set up a public server on a network?

  - by tyjkenn

  I am trying to set up a personal cloud server with OwnCloud on Ubuntu. LAMP is all set up. I was able to access it using the external IP address when I connected it directly to the modem, but what if I what if I want my server to share a LAN? I still want it accessible over the internet, but then if I go to the IP address from a web browser, it just tries to log into to router admin tools. The internal IP address works across the LAN, but I want to be able to access it from anywhere. This may be simple and I may be over-thinking it, but how do access my server? The router I am using is ASUS WL-520GU.

  Read the article

• Wireless Network Issue, Disconnecting Randomly From Network

  - by Surfer513

  I'm having an odd problem with my wireless network. Here is the background information: Server (Windows Server 2008) 1 to 10 end user machines connecting to the network Layer 3 Access Point (Asus WL-330 gE) connected to ethernet of Server and all machines connect to the network via the AP The end user machines get a connection to the server with no problems initially. But then connections are randomly lost throughout the day to the server/network. The wireless NICs of the machines still see the wireless network but are unable to connect to it. Then after some time the connection is regained automatically. I initially thought there was a problem with this particular AP, but then I took the same make/model AP out of storage and still ran into the problem. Any ideas what could be causing this??? Very confusing that the wireless nics on the end user machines can still see the network but not connect, and that the connections are randomly lost/gained. Thanks in advance!

  Read the article

• CPU Usage at 100% with "Hardware Interrupts"

  - by eventualEntropy

  After turning on my desktop one day, I found that my CPU usage was maxed out at 100%, with 99% of that going to hardware "Interrupts". I tried to enable/disable all my devices one by one through the device manager, and found that I could get the CPU usage used by the Interrupts down to 50% by disabling all devices labelled "USB Host Controller" (except the ones for the mouse/keyboard). I found that I also got 10-20% more from disabling "High Definition Audio Controller". Following the tutorial at: http://www.msfn.org/board/topic/140263-how-to-get-the-cause-of-high-cpu-usage-by-dpc-interrupt/ Led me to similar conclusions (that is, that the culprit is mostly "USB Host Controller"): I've tried updating my asus motherboard driver and my video card driver. This is on Windows 7 64 bit. I've spent hours trying to figure this out and I'm running out of ideas short of formatting (which might still not fix it!).

  Read the article

• Video Card needs additional mounting support

  - by Sean

  We are creating a fairly decent system with crossfire. The issue we are having is apparently the video cards are physically to heavy to be supported purely by the motherboard and case mounts. Whenever we have the case horizontal everything works fine however when we bring the case upright the computer stops working. Relevant Info: Video Cards (2) - Sapphire 5870 (http://www.newegg.com/Product/Product.aspx?Item=N82E16814102856) MotherBoard - Asus M4A79T Deluxe Case - CoolerMaster 922 HAF To me it looks as if an additional support bracket that could hold up the end of the card would be required (included with the viideo cards!!!) Does anyone have any experience with this.

  Read the article

• Intel P6100 CPU and Mobile Intel® HM55 Express Chipset

  - by Christopher Painter

  I have an Asus K52F-BBR5 notebook that uses an Intel P6100 ( 2GHZ 15x multiplier) and HM55 Express Chipset. I'm looking to replace it's 3GB with 8GB. The Crucial database seems to indicate that a PC3-8500 CAS 7 and PC3-10666 CAS 9 will both work. I'm not up to date on the latest DDR3 nomencalature and I'm wondering which would provide better performance. The price difference is negligible. Drawing on past experiences from many many years ago I could make an argument for either based on sync/async bus speed arguments and CAS latency differences but the truth is I don't know enough about the HM55 chipset to know which would be the correct choice. Does anyone know the answer or point me to information that would help me make the choice? I'm pretty sure the performance difference will be somewhat negligible also but still I'd like to make the optimal choice.

  Read the article

• eSata plugged into Sata socket via adaptor cable very slow

  - by Jon

  Why would an external eSata Drive (xSonic with 500Gb notebook Hard Drive) run ok on a Silicon Image based PCI-E to eSata adaptor at about 35MB/s, But then run really slow when plugged into NForce4 Sata socket via cable? I have another version of the problem with Really slow 1MB/s!!! performance on a ASUS P5K Pro Motherboard with E8400 CPU. This time the same card is plugged into a PCI-E socket. The same eSata drive is plugged into the Esata port on the card. All this is running on Windows XP Pro 32bit. Any suggestions on how to diagnose the problems??

  Read the article

• GeForce 9600GT support for dual monitor setup

  - by Theo

  I have a NVIDIA GeForce 9600 GT (point of view, link) on an Asus M2V-MX motherboard. The card has one DVI, HDMI and S-Video output. The graphics card does not seem to support dual monitors: the driver control panel for the graphics card does not detect a second monitor that is attached via S-Video (which leads me to believe that it doesn't support dual monitors with DVI and the other connections). Would it be possible to use a VGA/DVI splitter to attach two monitors to the single DVI output on the graphics card? Would this allow for a dual monitor setup, or only mirroring? How do I know if the graphic card supports this? With this particular motherboard, would it be possible to use the onboard video for another monitor?

  Read the article

• Robocopy to a drive connected to a wlan router fails

  - by Ville Koskinen

  I have a wireless router and an USB hard drive connected to it. Basic file access on the command line and Explorer works flawlessly after having set up some options on the router and mapping to some folders with net use k: \\ROUTER\Folder1 /user:MYLAPTOP\Me password /persistent:yes net use n: \\ROUTER\Folder2 /user:MYLAPTOP\Me password /persistent:yes Robocopy (and using SyncToy for that matter) to a network drive however fails: robocopy c:\Files k:\Backup /MIR /Z gives There is not enough space on the disk. 2010/01/05 09:52:11 ERROR 112 (0x00000070) Accessing Destination Directory N:\ Waiting 30 seconds... The error message is misleading: there is plenty of space on the disk and the folders I'm copying are small. The router is an ASUS WL-500gp with a standard firmware. I'd appreciate if someone would be able to explain what is causing the problem and, if possible, how to fix it.

  Read the article

• What influences the kind of RAM a desktop or laptop can support?

  - by Albert Iordache

  What exactly influences the kind of RAM a desktop or laptop can support? Apart from the clock speed, the maximum amount of RAM the motherboard can handle, the DDR type (1/2/3) and the shape of the module (DIMM for desktops, SO-DIMM for laptops)? I see that in certain cases, such as with the Kingston 4GB DDR3 1333MHz CL9, (and on the Kingston KTD-L3B/4G page) the page displays a set of laptop product numbers. Does the actual model of the laptop also influence the models of RAM it can support? Could, for instance, an Asus K52 work with that particular RAM module, even if it specifies Dell models?

  Read the article

• Installing Windows Server 2003 on AMD environment

  - by santhosh kumar

  Hi all, Our organisation we have 25 computers and we are trying to setup Windows Server 2003. We are planning to configure Active Directory NAT DNS server Visual Studio Team Foundation Server Subversion (SVN) Trac (Bug tracking tool) FTP server And our Hardware configuration is AMD Athlon 64 X2 Dual (Core processor 5600+, 2.60 GHz) Asus motherboard (M2N series) Transcend 4 GB RAM (800 MHz) 500 GB Hard Disk (RAID enabled) But my colleague is advising me AMD won't suite for servers platforms, and use Intel environment. Also they telling we can't install all the services to one server. I got confusion what to do?... Is really can`t install above services to AMD computer? Thanks...

  Read the article

• How do I get the Windows 8 Desktop to stop refreshing itself while I'm working?

  - by Nessa Morris

  I have an Asus touchscreen laptop with Windows 8, not RT. The best way that I can describe the problem is: when I am working on something in the desktop, the desktop/screen refreshes itself. It doesn't matter if I am using an IE window, or Word, etc. Basically, while I'm viewing the desktop, the icons disappear for a second or two and then come back. If I'm typing in Word, the screen essentially pauses and just stops typing. It won't start typing again until I touch the screen or click on something. In IE, the screen acts pretty similar, if I happen to be typing a URL, or in a form, etc. Why does it do this? And how can I make it stop? Thanks so much for any help you can give me, and please let me know if I can provide any other info that you think may be helpful.

  Read the article

• How to Shutdown PC by Pressing Power Button without asking "Force Close"?

  - by AgA

  I always Hibernate my PC. Sometimes when I boot, it does not recognize the mouse/keyboard or any USB devices. I've also setup it to go in sleep in 5 minutes. In that case I can't restart the PC so that USB starts working. When I press the Power button then it starts shutdown but asks confirmation twice, one is for shutdown by force confirmation and then there is one more. When my USB is disabled I can't input these options. So I switch off the power. What I want is that upon pressing Power Button it should at once start shutdown without asking any more confirmations System details: Win-7 Home Premium 64 bit Intel i3 530 Asus P montherboard EDIT: It is Desktop PC

  Read the article

• Why only the left speakers are working?

  - by user324469

  I've just bought a 5.1 speakers and only the left side speakers and the center are working. If I plug in the speakers to my mp3 player than each speaker is working, so the speakers are good. I have windows 7 and I can't configure it. Please help me! I'm sure that the problem is with some settings at the computer. A while ago I had the same issue with some stereo speakers and I can't remember how I've fixed it, but it was only a setting error. I don`t think that my sound card could be the problem, because it's in-built and I have a new motherboard: asus m2n68-am. I've just tested my computer with some stereo head speakers and also only the left one was working. If I start the speakers very loud than the right speakers are making some noise, too I've connected the speakers with a two channels cable. This is the speakers type: genius sw-hf 5.1 5050 v2

  Read the article

• AMD Phenom 2 is idling at 50°C, can I get it cooler?

  - by liam

  Is it possible to damage a CPU so that it works, but only at high temperatures? My Phenom 2 1090T is idling at 50°C and I have tried everything to get it down. I can play Deus Ex HR, Arkham City, or Dirt 3 and it hovers around 60. I have cleaned out all my fans: 2 intake (front and side), 1 exhaust (Arctic Freezer). My machine is a brand new Antec 520 high current gamer. Also: Extreme3 770 8 GB Kingston DDR3 (2x4 GB) 750 GB Seagate Barracuda ASUS Xonar DG Radeon HD 5670 New Arctic Freezer Pro Rev 2 (days old and mounted properly with Arctic Silver 5). I also dropped an Athlon 250 dual core into my rig and that ran at under 30. Is the CPU dying? I know that 50°C idle for an AMD is not normal.

  Read the article

• Wireless networking on Gnome on Ubuntu 9 / 10

  - by WaveyDavey

  So here's my problem: I have some netbooks (ASUS eee, and ACER Aspire Ones) that I've been tasked to set up as kiosk machines, locked up tight for normal users. I am a command-line, server man, so this gnome malarkey is all a bit new to me. I found a lovely 9.04 kiosk livecd that installs and runs exactly as I want it to, but I can't get the wireless working. So I dropped on a full 10.4 distro, and wireless works straight out of the box (so hardware is good) - all I needed to do was right-click on the network connection icon, enter my SSID and password (WPA/WPA2) and away it went, perfect. Further investigation on 10.4 distro shows that /etc/networking/interfaces is virtually empty (just auto lo iface lo inet loopback in it), even after I have set up the wireless thru the gnome taskbar applet (is that the right word?). So where does gnome / ubuntu store the network settings to bring the blasted wireless connection up, and what do I need to do on the kiosk version to get wireless running?

  Read the article

• Windows 7 won't boot from raid-1 disks until secondary non-bootable disks are removed

  - by PaulP

  I have an ASUS X58 motherboard with a Intel ICH10R southbridge raid controller. Bootable raid-1 SATA disks are on channels 4, 5. Secondary raid-1 SATA disks are on channels 0,1. Everything was working OK until one time I removed the secondary disks and booted successfully but after I shut down and reinstalled the secondary disks rebooting fails with a "Please insert proper boot item" error. If I remove the secondary disks and reboot then do a hot-install of the disks after booting completes, then all is OK. Do I have a raid setup problem or is it something I can fix with Disk Manager.

  Read the article

• Blinking cursor after repair install on Win XP

  - by Nathan

  I have an Asus Eee PC netbook which I upgraded the drive of. After some shenanigans, I was able to do a repair install from my Windows XP CD. However, I still have a blinking cursor in the upper-left-hand corner after POST. I tried going into the recovery console and doing chkdsk/fixboot/fixmbr with no effect. Any suggestions would be appreciated! (Sorry if it's inappropriate to post a followup as a new question; I'm not sure how I should do it in a way that will cause it to actually be seen). Thanks, Nathan

  Read the article

• Windows 7 Standy/Hibernate Freeze/Lockup

  - by Kyle

  I'm running Windows 7 Ultimate on a MSI U100 Netbook which often experiences a lockup or freeze whilst hibernating or shutting down. I have a friend with an Asus netbook running Windows 7 who has experienced the same issue. This happens to me perhaps 1-2 times a week, and is frustrating as hell because it will just sit there running flat out (the fan goes to max after a while) until the battery dies if I don't notice it first. Just wondering if anyone has had any similar issues or might be able to point me in the right direction. The freeze occurs when the screen has faded to black. The HDD light flickers for a few moments then just sticks on solid. I haven't been able to isolate any apps which may be causing this either. It will be fine one standby, and lock up the next with no new apps open. Any thoughts greatly appreciated. Cheers, Kyle

  Read the article

• Is it possible to use a dual processor computer as your desktop?

  - by Ivo

  I've seen some people suggesting to get a motherboard that supports two processors and stick two Xeon Nehalem processors in it. Could you use this system as a desktop PC or is this useless or even impossible? It's more hypothetical question if Windows 7 would support such a set-up. I know you could just take an i7, but wouldn't two of those processors be a whole lot more awesome? Like the previous generation Skulltrails? The idea would be to have a motherboard like this ASUS Z8NA-D6C Dual LGA 1366 Intel 5500 ATX and two Xeons (since I don't think i7's could be used) Intel Xeon E5405 Harpertown to run something like Windows 7 Ultimate.

  Read the article

• No compatible network card

  - by sbintcliffe

  Motherboard: Asus K8N-E Deluxe with onboard NIC (nVidia nForce) Secondary NIC: I've tried using a standard NIC (Device Manager displays this as D-Link DFE-538TX 10/100, but under manufacturer in the General tab of the properties in Windows it states Realtek Semiconductor Corp.) I have downloaded ESXi 4.0.0 build 208167 and cooked to disc. I've booted from it, the .TGZ modules load from the yellow and grey screen, the progress bar reaches to about 60% and like a second later the screen changes and I have the following information on screen; "No compatible network adapter found. Please consult the HCG." I've checked the HCG and found that my motherboard is listed. I also get the same message with the secondary NIC. Any ideas please?

  Read the article

• How to add higher video resolution in Ubuntu 10.04 (UNR on EEE1101HA)

  - by lexu

  I picked up an ASUS EEE 1101HA with Windows 7 and installed UBUNTU 10.04 Netbook Remix (dual boot). Ubuntu runs fine, but it doesn't recognize that the notebook LCD is 1388x768 and thus only offers 1024x768 and 800x600 as monitor resolution. So .. how can I tell it about that higher resolution? (Have root pwd & vi, una-bash-ed to use both.. ) UPDATE there is currently (early May 2010) no video-driver for the Intel GMA500 "Poulsbo" => no solution exists for now.

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >