Search Results

Search found 1167 results on 47 pages for 'modem'.

Page 30/47 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• How to set WAN side buffers for WRT54GL running Tomato Firmware

  - by Vickash

  I've recently set up a machine running m0n0wall to try and fight buffer bloat and do some traffic shaping. It was more convenient (geographically speaking) to connect the cable modem directly to my old WRT54GL, then pass everything to the m0n0wall machine and have that do the real routing work. It took a bit of work, but it's working pretty well. I have a cable connection. I have m0n0wall set up to utilize only 90% of the specified speed of my subscription, which is fine. But I've noticed that at certain times of the day (possibly when my true bandwidth drops below that 90%), there's more latency if the connection is used heavily, and traffic shaping doesn't seem to work as well. I suspect this is caused by the buffers on the WRT54GL still being unnecessarily large. If the connection is working as expected, they won't get filled, but in times of reduced bandwidth they would. Does anyone know the command I need to execute, on the WRT54GL running Tomato Firmware, to reduce the buffers on the WAN interface to the minimum size possible?

  Read the article

• Can connect to DNS addresses typed in the URL but not by IP addresses

  - by Ben

  I just changed over my modem to bridged mode, and changed my wireless router to PPPoE. My PC IP address is reserved and forwards port 80 to my computer's IP address based on my MAC address. I have a problem, however. I cannot access my local webserver by public IP address or my router 192.168.0.1 wirelessly from any other computer or iPad. I can, however, connect by this PC which is connected to the wireless router via ethernet. Via wireless, it says it cannot connect, however DNS addresses work (e.g. google.com, etc.) Any ideas?

  Read the article

• Dlink DIR-615 suddenly stops working - Orange internet light

  - by zm15

  I unplugged my Dlink DIR-615 router last night from the wall due to a storm rolling in. I've done this countless times, no problem. However, when I went to plug it in and use the internet today, nothing. Check everything, cycled everything. Hard reset the router, nothing. The little globe on the front is red/orange, and it should be green. Windows gives me an error of a "DNS Issue", and the internet works when connected directly to the modem. How can I fix this issue? Why would it suddenly stop working?

  Read the article

• Remote Desktop connection repeatedly aborting

  - by DerKlaus

  I connect to my workplace computer using Remote Desktop. After 1-2 minutes the application freezes to tell me after one more minute that the connection was aborted. It then reconnects. Everything works again for 1-2 minutes. Then the process repeats. Probably Forever. My coworkers do not experience such problems when connecting to the workplace. My workplace computer: Windows 7 32bit My home computer: Windows 7 64bit connected to the internet via WLAN-router with integrated ADSL modem (Linksys WAG200G) Things I already tried to fix the problem: disabled the Windows firewall disabled the other firewall reduced the MTU upgraded the firmware on the router configured port-forwarding to forward all packets to my home computer The problem remains unchanged. What could be the cause of the connection aborts? What else can I try to fix the connection? Thanks in advance.

  Read the article

• How do I connect to my wireless router settings on Linux?

  - by Joshua Robison

  My network is as follows: Internet Provider's DSL modem connected to Internet Provider's router connected to My Buffalo Wireless router connected to My Toshiba Laptop via WEP network My Toshiba Laptop is running LMDE Linux Mint Debian Edition Service Pack 3 i686 kernel I have experience using various routers and their configuration settings but for some reason I can not access my wireless router. In my cromium browser I tried the following ip addresses: Standard Usual IPs : 192.168.1.1, 192.168.0.1 (connection hangs and goes no where) On the back of my router: 192.168.11.1, 192.168.11.100 (connection hangs and goes nowhere ) In some tcpip info: 192.168.24.1 (unable to connect error message) If someone could give me some terminal commands that will help me find my wireless router address or some trouble shooting ideas, I would be very thankful.

  Read the article

• Does a Required Restart for Windows Update log an event? If so what is the source/id?

  - by Beuy

  Hi there, Does anyone happen to know if a required restart in order to apply Windows Updates creates a entry in the event log? If so which log is it under, and what is the source/id? I have a legacy system that needs to an account, constantly logged into console for applications to function as required (Some old PROCOMS modem software for customers without Internet access but a telephone (Dial-up? Separate issue, don't get me started -.-)). When an update is applied to this machine that requires a restart (Server 2003) I would like an e-mail alert to be sent.

  Read the article

• IPs on home network

  - by windchime

  I have a Linksys router and a Belkin wireless router at home. The Linksys router is connected to cable modem and two computers, as well as to the Belkin wireless router. A 3rd computer is connected to the Belkin router through Wifi. The IP addresses of the computers connected to Linksys are 192.168.1.101 and 192.168.1.102. The IP address of the Linksys router on LAN is 192.168.1.1. The IP address of the Belkin wireless router is 192.168.2.1(based on the 3rd computer's routing table) and the IP address of the 3rd computer is 192.168.2.5. If I ping 192.168.1.101 from 192.168.2.5, all are well. However, if I ping 192.168.2.5 from 192.168.1.101, Destination Host Unreachable. Why?

  Read the article

• Multiple IPs on Juniper SRX100 Untrust Port

  - by Will

  I am having trouble getting multiple IP addresses on the untrust port. I have tried a few different methods, but can't seem to get it to work. Does anyone have a good tutorial that is not easily found or if possible can type up the steps? I don't mind trying to do it through ssh, but would prefer web interface. Thank you ++++++++++++ Feb 1 fe-0/0/0 { unit 0 { family inet { dhcp { update-server; } } } } routing-options { static { route 0.0.0.0/0 next-hop 96.11.173.81; } } Right now it's setup to receive settings from 'cable modem' through dhcp, but I think it's only getting one IP.

  Read the article

• OpenDNS servers initial response is very slow

  - by Ben Collins

  I've got a Time Warner cable ISP package (RoadRunner), and the modem they gave me doesn't allow me to specify which DNS servers to use; it always uses whatever the upstream dhcp server gives it. I prefer to use OpenDNS on my home network, so i've configured a couple of my PCs manually in the Windows adapter settings for IPv4 such that their IP addresses are obtained via DHCP, but the DNS server settings are fixed to the OpenDNS server IPs. Now, when I startup Windows on these PCs, it always takes 2-3 minutes to start receiving responses from the DNS servers; any request before that times out. While not debilitating, this is quite annoying. Any ideas why this might be happening?

  Read the article

• HOw to give static ip to router from window XP LAN

  - by Captain Planet

  I have the USB modem internet connection. I am using ICS sharing in XP to share my internet connection. ON window XP LAN i have set up the LAN IP as 192.168.137.1 255.255.255.0 Now i have joined the cable from that XP LAN to another LAPTOP running vista Now if set the LAN on VISTA to get ip automatically them internet don't work but if manually set the ip to 192.168.137.3 255.255.255.0 gateway 192.168.137.1 Then my internet works But i want to join that LAN cable from XP to rouer so that i can use router to divide internet. But i don't know how i can give static ipto router because i think somehow that LAN on XP is not giving the IP address

  Read the article

• Browsers ignoring hosts file

  - by madkris

  Until recently my browsers started to ignore my hosts file. I have Windows 7 operating system installed. 192.168.0.5 livesite.com I have tried: Clearing browser cache Issued "ipconfig /flushdns" from the command line Issued "ping livesite.com" from the command line (response was "Reply from 192.168.0.5: bytes=32 time=1ms TTL=128") Restarting unit Backing up original hosts file and making a new one Checking lmhosts.sam (everything is commented out) Connecting directly to modem using cable Checked \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Tried it on another laptop with exactly the specs as I have Then I tried Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser ok but only for a sec) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser not ok) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Any idea why it worked for a moment? Or better yet anything I havent tried or some error I may have overlooked?

  Read the article

• windows 7 issues with local domain name

  - by Phill

  Until recently my operating system was XP where for the purpose of development and testing of php and zen cart I set up xampp that included apache http server and mercury mail server I also made changes to C:\Windows\System32\drivers\etc\hosts as follows: 127.0.0.1 www.zen.com # For browser access 127.0.0.1 mail.mercury.com # For email access 127.0.0.1 mercury.com # For mercury mail server This allowed the use of www.zen.com in the address bar of my browser rather than 'localhost' and mail.mercury.com to access email via thunderbird. All was well. Then I installed windows7, I made all the mods and again everything appeared to run as expected.Then I turned off my wireless modem causing all working local connections to fail. Localhost in the address bar still works but not www.zen.com and thunderbird 'cannot find mail.mercury.com' Is there some way to overcome what ever is causing this.

  Read the article

• Fedora14 serial console how-to needed

  - by lamba2

  Has anyone ever got a serial console working in fedora 14 ? Is it as simple as adding to grub: serial --unit=0 --speed=38400 terminal --timeout=10 serial console and add to the kernel lines: console=tty0 console=ttyS0,38400 ??? If so, this isn't working for me. I have agetty installed, and im using minicom, although i've heard you can also use "screen /dev/ttyUSB0" on the client side. The /etc/init/serial.conf file suggests it should be working, but nothing. Currently getting no joy from any of this after 2 days. Does anyone know a method that definitely works on fedora 14 ? (no /etc/event.d/ needed or such) edit: Client side im using a null modem cable and usb-serial adaptor.

  Read the article

• How to connect XP mode VM to the host so as to simulate LAN Activities?

  - by rsjethani

  First of all my PC config: Host:Windows 7(32-bit) Guest: Windows XP SP3 as XP Mode. Integration Features Disabled(I don't think it has any thing to do with networking). Network Connections on Host : 1.Local Area Connection(Realtek...) - unplugged(as no other PC is connected). 2.Nokia 2730 classic USB Modem - I use this connect to the internet. Now,How can I connect the guest to the host as if they were on a LAN. Please give specific steps as I am using Windows XP Mode/Virtual machine for the first time.

  Read the article

• Wireless Repeating with two Netgear N750 (WNDR4300)

  - by jomo1911

  I have a Netgear N750 as my main router, which connects to the internet via a modem. I have a second Netgear N750 which I want to use to repeat the wireless signal of the main router. I logged in to routerlogin of my main router (192.168.1.1) and set up the "Wireless Repeating Function". I set it as the "Wireless Base Station" and filled in the MAC adress of my second Netgear N750. Then I logged in to routerlogin of my second router and set it up as the "Wireless Repeater", I gave it the IP 192.168.1.11 and filled in the MAC adress of the base station. During the setup of the second router (Repeater) I had to disable all security functions. If I connect to the repeaters' WLAN signal, I get no internet connection. Maybe you can help me, thanks

  Read the article

• What's constitute an entry on the IPTables and how to find out which client it is originated from

  - by cbd

  I have a Billion BiPac 7700N Modem/Router/Access Point and I connect another router (TP-Link TL-WR1043ND) in wan-bypass mode to extend the wireless coverage. Lately, I noticed that the connection through TP-Link has been dropping out quite regularly. Having read some posts on the Internet, I checked system log on 7700N and found that there are many "nf_conntract: expectation table full" errors, which I suppose the iptables are full. My questions: What does constitute an entry on the iptable? Is it a client or a connection (which means one client can have multiple connections) How could I find out where are those connections originated from? Note: Many reported that the issue is usually related to having torrents running but I don't have any torrents running. Thank you.

  Read the article

• Hylafax and "No response to MPS"

  - by Joril

  We have an Hylafax 5.2.5 CentOS 5 installation hosted inside a Xen virtual machine. It works quite well, but now I'm in the process of upgrading/migrating it to a KVM virtual machine running Ubuntu 10.04 and Hylafax 5.5.1 (compiled from source using http://sourceforge.net/projects/hylafax/files/hylafax%20debian%20build%20files/ ) The problem I'm having is that - while receiving works fine - sending faxes is extremely unreliable, I get lots of "No response to MPS repeated 3 tries", or "Failure to transmit clean ECM image data." The line, modem and configuration files I'm using are the same as before, so I thought that it could be a KVM scheduling issue, but even setting cpu_shares to 10240 instead of 1024 doesn't change a thing... What else could I try? Here's an example log file http://pastebin.com/cN01cpEs

  Read the article

• Port forwarding for VNC on Dynalink RTA1335 not working

  - by Curyous

  I've vnc-java running on an Ubuntu box, with the IP address 192.168.1.68, using port 5800 (because port 5900 is being used for normal VNC). If I connect to 192.168.1.68:5800 using another computer on the network, I can use VNC fine. Using www.whatismyip.com, I find out what my IP address from the outside world is, and if I go directly to that, I get to access my modem/router. If I try to navigate to that IP address, with ':5800' on the end, I get a "This web page is not available." error. I have port forwarding set up in the router as follows: Application Name External Packet Internal Host IP Address Protocol Port IP Address Port VNC ALL TCP/UDP 5800 192.168.1.68 5800 What else do I need to do to get this to work?

  Read the article

• Problems with Xen installation

  - by Rodnower

  Hello, I have CentOS 5.4 installed. Now I'm trying to install Xen with out connecting to Internet (I have any driver for modem, so I search on Inernet only from Windows). All I have are 7 installation disks. First I done was to find kind of some add/remove programs wizard but it needed connection to Inernet. Second I try was to find Xen rpm on all disks and install it. But I fell on some dependency of some dependency. Third I attempted was to boot from first disk and do upgrade, but also it was unsuccessfully... So my question is: is there some way to install Xen from CentOS installation disks with out network? Thank you for ahead.

  Read the article

• How do I set up a shared internet on a network using computer hooked up to a router

  - by Skadlig

  I got a wireless broadband modem (Huawei E1750) hooked up to my computer (call it A., running Windows-7) whose internet I wish to share to my other computer (call it B., also running Windows-7). A. is hooked up to my d-link DIR-600 router using a wired connection to port 1 on the router. B. is connected to the router using a wireless connection. Now I have tried setting up the sharing according to the help files for ICS but I have not been able to get it working. I suspect that there is something in my hardware configuration that is making it difficult. I would appreciate some tips and pointers as to what could be the reason to my problems.

  Read the article

• Can I run a web site from my home network without jeapordizing other computers on my LAN?

  - by Alchemical

  I have a home LAN with 5 computers and a NAS, all connected to a Linksys router which is connected to my Cox cable modem. I'm interested in having one of my computers run an IIS-based web site and to have it be accessible to the internet with a static IP. However, I do not want o jeapordize the safety of the other computers on my home network! Is there anyway to do this safely, or as safe as possible? I may also like to run an FTP server from this computer. Finally, optionally I would like to allow remote access to this computer from the internet--but it seems to me that that may increase the security risk to the other computers substantially.

  Read the article

• Why do I see router and not my real IIS?

  - by Tim Tom

  I am trying to access IIS through web but unable to do so. Basically I have a router (which functions as router and modem) that is given by ISP and I have another router connected to the router given by ISP. My ISP's router can be visited through 192.168.0.1 and the router that I connected to ISP's router can be visited through 192.168.1.1 Please see my ISP's router: As you can see I have DMZ enabled for my router of 192.168.1.1 Now please see my router of 192.168.1.1: As you can see I added a virtual server for port 80 where 192.168.1.125 is my private IP. I rebooted both of my modems an tried to visit my IP from: http://www.whatsmyip.org/ and after doing so, when I type my live IP I still see my router of 192.168.0.1 instead of my IIS. What am I missing? Note: I have disabled Firewall on both of the routers. Any help would be appreciated.

  Read the article

• Why do I see router and not my real IIS?

  - by Tim Tom

  I am trying to access IIS through web but unable to do so. Basically I have a router (which functions as router and modem) that is given by ISP and I have another router connected to the router given by ISP. My ISP's router can be visited through 192.168.0.1 and the router that I connected to ISP's router can be visited through 192.168.1.1 Please see my ISP's router: As you can see I have DMZ enabled for my router of 192.168.1.1 Now please see my router of 192.168.1.1: As you can see I added a virtual server for port 80 where 192.168.1.125 is my private IP. I rebooted both of my modems an tried to visit my IP from: http://www.whatsmyip.org/ and after doing so, when I type my live IP I still see my router of 192.168.0.1 instead of my IIS. What am I missing? Note: I have disabled Firewall on both of the routers. Any help would be appreciated.

  Read the article

• Splitting Ethernet cable

  - by Nathan

  I am looking for the best way to network my small business. I have an office where my router/modem are located, and then 2 more computers in another room. I can route Ethernet to this room with about 75 ft of cabling, and I would like to do this because my computers on Ethernet are getting 3x the speed as computers on wireless. Is there any way I can use just one Ethernet cable to span the 75 feet, and then maybe 2 smaller ones to go to the two computers from there? If there's a simple way to do this, maybe with a connector that would be ideal, as opposed to buying over 150 ft of cabling. Thanks!

  Read the article

• How to open ports on router for better torrent performance

  - by Mehper C. Palavuzlar

  I've been using utorrent to download and upload torrents for a long time. Recently someone told me that I need to open port(s) for utorrent from my router settings for better downloading and uploading performance. Is it true? If yes, how can I do that? My utorrent version: 2.0 and the port used for incoming connections: 61829. My router: Yaksu S200 ADSL router modem and I can reach its settings via web interface. I looked at the settings but they seem a bit complicated to me. Other info you may need to know: I have dynamic IP. I'm using Win7 x64.

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >