Search Results

Search found 9446 results on 378 pages for 'ssh keys'.

Page 309/378 | < Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >

• Toshiba wireless is blocked

  - by zorrillo

  I have the same problem, a 32 bits toshiba nb255, it first had the windows 7 bu next I installed the ubuntu 11.04. The wifi does not turn on. I used the following issues the commands rfkill unblock wlan0, sudo ifconfig wlan0 down; they were not able. by setting up the bios in advanced menu, the wireless communication sw in ON, but it did not work also. neither the utilities toshiba nor utilities of ubuntu (wicd, wifi radar). by using gedit to file group, nothing. by installing madwifi packet, nothing. by exporting the wifi driver from windows to ubuntu, by means of the NDISwrapper packet, neither. I put the current scripts of the ouput of the cli root@zorrillo:~# rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes root@zorrillo:~# sudo lspci | grep Atheros 07:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) root@zorrillo:~# root@zorrillo:~# ifconfig -a eth0 Link encap:Ethernet direcciónHW 88:ae:1d:47:df:e1 ACTIVO DIFUSIÓN MULTICAST MTU:1500 Métrica:1 Paquetes RX:0 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:0 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:0 (0.0 B) TX bytes:0 (0.0 B) Interrupción:43 Dirección base: 0xe000 lo Link encap:Bucle local Direc. inet:127.0.0.1 Másc:255.0.0.0 Dirección inet6: ::1/128 Alcance:Anfitrión ACTIVO BUCLE FUNCIONANDO MTU:16436 Métrica:1 Paquetes RX:8 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:8 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:0 Bytes RX:480 (480.0 B) TX bytes:480 (480.0 B) ppp0 Link encap:Protocolo punto a punto Direc. inet:189.203.115.236 P-t-P:192.168.226.1 Másc:255.255.255.255 ACTIVO PUNTO A PUNTO FUNCIONANDO NOARP MULTICAST MTU:1500 Métrica:1 Paquetes RX:6384 errores:30 perdidos:0 overruns:0 frame:0 Paquetes TX:6893 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:3 Bytes RX:5473081 (5.4 MB) TX bytes:974316 (974.3 KB) wlan0 Link encap:Ethernet direcciónHW 00:26:4d:c3:d0:44 DIFUSIÓN MULTICAST MTU:1500 Métrica:1 Paquetes RX:0 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:0 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:0 (0.0 B) TX bytes:0 (0.0 B) note.-it is logical all the counters are cero if the wireless device is down root@zorrillo:/home/zorrillo/Descargas/802BGA# ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill root@zorrillo:/home/zorrillo/Descargas/802BGA# It would seem the wireless switching does not react with whichever ubuntu 11.04 command (I hope to be wrong). The target remains the same, in order of the scripts above. I am worried, I have tried to find any answer for days and nights. Toshiba does not supply drivers or soft support for linux, marketing of course. I only see the device is up by protocols and down phisically, My question is, is it possible to enable or not shutdown physically the device?, because in the toshiba model nb255 the wifi is not set up/down bye means of a physical switch, but by means a combination of Fn + F8 (only for windows 7, no one more), Is there one possibility to configure the hot keys in ubuntu?

  Read the article

• RadioButtons and Lambda Expressions

  - by MightyZot

  Radio buttons operate in groups. They are used to present mutually exclusive lists of options. Since I started programming in Windows 20 years ago, I have always been frustrated about how they are implemented. To make them operate as a group, you put your radio buttons in a group box. Conversely, to group radio buttons in HTML, you simply give them all the same name. Radio buttons with the same name or ID in HTML operate as one mutually exclusive group of options. In C#, all your radio buttons must have unique names and you use group boxes to group them. I’m in the process of converting some old code to C# and I’m tasked with creating a user control with groups of radio buttons on it. I started out writing the traditional switch…case statements to check the appropriate radio button based upon value, loops to uncheck them all, etc. Then it occurred to me that I could stick the radio buttons in a Dictionary or List and use Lambda expressions to make my code a lot more maintainable. So, here is what I ended up with: Here is a dictionary that contains my list of radio buttons and their values. I used their values as the keys, so that I can select them by value. Now, instead of using loops and switch…case statements to control the radio buttons, I use the lambda syntax and extension methods. Selecting a Radio Button by Value This code is inside of a property accessor, so “value” represents the value passed into the property accessor. The “First” extension method uses the delegate represented by the lambda expression to select the radio button (actually KeyValuePair) that represents the passed in value. Finally, the resulting checkbox is checked. Since the radio buttons are in the same group, they function as a group, the appropriate radio button is selected while the others are unselected. Reading the Value This is the get accessor for the property that returns the value of the checked radio button. Now, if you’re using binding, this code is likely not necessary; however, I didn’t want to use binding in this case, so I think this is a good alternative to the traditional loops and switch…case statements.

  Read the article

• StringBuffer behavior in LWJGL

  - by Michael Oberlin

  Okay, I've been programming in Java for about ten years, but am entirely new to LWJGL. I have a specific problem whilst attempting to create a text console. I have built a class meant to abstract input polling to it, which (in theory) captures key presses from the Keyboard object and appends them to a StringBuilder/StringBuffer, then retrieves the completed string after receiving the ENTER key. The problem is, after I trigger the String return (currently with ESCAPE), and attempt to print it to System.out, I consistently get a blank line. I can get an appropriate string length, and I can even sample a single character out of it and get complete accuracy, but it never prints the actual string. I could swear that LWJGL slipped some kind of thread-safety trick in while I wasn't looking. Here's my code: static volatile StringBuffer command = new StringBuffer(); @Override public void chain(InputPoller poller) { this.chain = poller; } @Override public synchronized void poll() { //basic testing for modifier keys, to be used later on boolean shift = false, alt = false, control = false, superkey = false; if(Keyboard.isKeyDown(Keyboard.KEY_LSHIFT) || Keyboard.isKeyDown(Keyboard.KEY_RSHIFT)) shift = true; if(Keyboard.isKeyDown(Keyboard.KEY_LMENU) || Keyboard.isKeyDown(Keyboard.KEY_RMENU)) alt = true; if(Keyboard.isKeyDown(Keyboard.KEY_LCONTROL) || Keyboard.isKeyDown(Keyboard.KEY_RCONTROL)) control = true; if(Keyboard.isKeyDown(Keyboard.KEY_LMETA) || Keyboard.isKeyDown(Keyboard.KEY_RMETA)) superkey = true; while(Keyboard.next()) if(Keyboard.getEventKeyState()) { command.append(Keyboard.getEventCharacter()); } if (Framework.isConsoleEnabled() && Keyboard.isKeyDown(Keyboard.KEY_ESCAPE)) { System.out.println("Escape down"); System.out.println(command.length() + " characters polled"); //works System.out.println(command.toString().length()); //works System.out.println(command.toString().charAt(4)); //works System.out.println(command.toString().toCharArray()); //blank line! System.out.println(command.toString()); //blank line! Framework.disableConsole(); } //TODO: Add command construction and console management after that } } Maybe the answer's obvious and I'm just feeling tired, but I need to walk away from this for a while. If anyone sees the issue, please let me know. This machine is running the latest release of Java 7 on Ubuntu 12.04, Mate desktop environment. Many thanks.

  Read the article

• HTML5 platformer collision detection problem

  - by fnx

  I'm working on a 2D platformer game, and I'm having a lot of trouble with collision detection. I've looked trough some tutorials, questions asked here and Stackoverflow, but I guess I'm just too dumb to understand what's wrong with my code. I've wanted to make simple bounding box style collisions and ability to determine on which side of the box the collision happens, but no matter what I do, I always get some weird glitches, like the player gets stuck on the wall or the jumping is jittery. You can test the game here: Platform engine test. Arrow keys move and z = run, x = jump, c = shoot. Try to jump into the first pit and slide on the wall. Here's the collision detection code: function checkCollisions(a, b) { if ((a.x > b.x + b.width) || (a.x + a.width < b.x) || (a.y > b.y + b.height) || (a.y + a.height < b.y)) { return false; } else { handleCollisions(a, b); return true; } } function handleCollisions(a, b) { var a_top = a.y, a_bottom = a.y + a.height, a_left = a.x, a_right = a.x + a.width, b_top = b.y, b_bottom = b.y + b.height, b_left = b.x, b_right = b.x + b.width; if (a_bottom + a.vy > b_top && distanceBetween(a_bottom, b_top) + a.vy < distanceBetween(a_bottom, b_bottom)) { a.topCollision = true; a.y = b.y - a.height + 2; a.vy = 0; a.canJump = true; } else if (a_top + a.vy < b_bottom && distanceBetween(a_top, b_bottom) + a.vy < distanceBetween(a_top, b_top)) { a.bottomCollision = true; a.y = b.y + b.height; a.vy = 0; } else if (a_right + a.vx > b_left && distanceBetween(a_right, b_left) < distanceBetween(a_right, b_right)) { a.rightCollision = true; a.x = b.x - a.width - 3; //a.vx = 0; } else if (a_left + a.vx < b_right && distanceBetween(a_left, b_right) < distanceBetween(a_left, b_left)) { a.leftCollision = true; a.x = b.x + b.width + 3; //a.vx = 0; } } function distanceBetween(a, b) { return Math.abs(b-a); }

  Read the article

• Can't access some websites using Ubuntu 13.10

  - by Adame Doe

  Something's wrong with Ubuntu. Since I've upgraded to 13.10, I can't access some websites for no apparent reason. I've tried everything imaginable to solve this problem : Made sure that MTUs are the same, Disabled IPv6 in both the network manager and used browsers, Deactivated my network keys, DMZed my computer, Used other DNS like Google and OpenDNS, Checked that no firewall was running my computer ... And it's the same result. I even tried to reinstall Ubuntu a couple of times, but no luck. The most annoying thing about it is I can't access wordpress.org! So, there's no way it could be an ISP restriction of some kind. When I use a VPN, I can access pretty much anything. I'm really frustrated because I have to use wordpress.org very often. Any clue? ifconfig adame@adame-ws:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:26:18:3d:b0:7c inet addr:10.42.0.1 Bcast:10.42.0.255 Mask:255.255.255.0 inet6 addr: fe80::226:18ff:fe3d:b07c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8024 errors:0 dropped:0 overruns:0 frame:0 TX packets:7966 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:684480 (684.4 KB) TX bytes:616608 (616.6 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:8222 errors:0 dropped:0 overruns:0 frame:0 TX packets:8222 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:568269 (568.2 KB) TX bytes:568269 (568.2 KB) wlan0 Link encap:Ethernet HWaddr 00:19:70:40:85:eb inet addr:192.168.2.3 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::219:70ff:fe40:85eb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1464 Metric:1 RX packets:123705 errors:0 dropped:0 overruns:0 frame:0 TX packets:98141 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:94963545 (94.9 MB) TX bytes:10387470 (10.3 MB) /etc/hosts 127.0.0.1 localhost 127.0.1.1 adame-ws ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters tracepath wordpress.org 1: adame-ws.local 0.092ms pmtu 1500 1: 192.168.2.1 1.300ms asymm 2 1: 192.168.2.1 1.060ms asymm 2 2: no reply 3: no reply 4: no reply 5: no reply 6: no reply 7: no reply 8: no reply ... keep on going like that ping wordpress.org adame@adame-ws:~$ ping wordpress.org PING wordpress.org (66.155.40.250) 56(84) bytes of data. --- wordpress.org ping statistics --- 10 packets transmitted, 0 received, 100% packet loss, time 9071ms

  Read the article

• Correct permissions for /var/www and wordpress

  - by dpbklyn

  Hello and thank you in advance! I am relatively new to ubuntu, so please excuse the newbie-ness of this question... I have set up a LAMP server (ubuntu server 11.10) and I have access via SSH and to the "it works" page from a web browser from inside my network (via ip address) and from outside using dyndns. I have a couple of projects in development with some outside developers and I want to use this server as a development server for testing and for client approvals. We have some Wordpress projects that sit in subdirectories in /var/www/wordpress1 /var/www/wordpress2, etc. I cannot access these sub directories from a browser in order to set up WP--or (I assume) to see the content on a browser. I get a 403 Forbidden error on my browser. I assume that this is a permissions problem. Can you please tell me the proper settings for the permissions to: 1) Allow the developers and me to read/write. 2) to allow WP set up and do its thing 3) Allow visitors to access the site(s) via the web. I should also mention that the subfolder are actually simlinks to folder on another internal hdd--I don't think this will make a difference, but I thought I should disclose. Since I am a newbie to ubuntu, step-by-step directions are greatly appreciated! Thank you for taking the time! dp total 12 drwxr-xr-x 2 root root 4096 2012-07-12 10:55 . drwxr-xr-x 13 root root 4096 2012-07-11 20:02 .. lrwxrwxrwx 1 root root 43 2012-07-11 20:45 admin_media -> /root/django_src/django/contrib/admin/media -rw-r--r-- 1 root root 177 2012-07-11 17:50 index.html lrwxrwxrwx 1 root root 14 2012-07-11 20:42 media -> /hdd/web/media lrwxrwxrwx 1 root root 18 2012-07-12 10:55 wordpress -> /hdd/web/wordpress Here is the result of using chown -R www-data:www-data /var/www total 12 drwxr-xr-x 2 www-data www-data 4096 2012-07-12 10:55 . drwxr-xr-x 13 root root 4096 2012-07-11 20:02 .. lrwxrwxrwx 1 www-data www-data 43 2012-07-11 20:45 admin_media -> /root/django_src/django/contrib/admin/media -rw-r--r-- 1 www-data www-data 177 2012-07-11 17:50 index.html lrwxrwxrwx 1 www-data www-data 14 2012-07-11 20:42 media -> /hdd/web/media lrwxrwxrwx 1 www-data www-data 18 2012-07-12 10:55 wordpress -> /hdd/web/wordpress I am still unable to access via browser...

  Read the article

• Building Enterprise Smartphone App &ndash; Part 3: Key Concerns

  - by Tim Murphy

  This is part 3 in a series of posts based on a talk I gave recently at the Chicago Information Technology Architects Group.  Feel free to leave feedback. Keys Concerns Of Smartphones In The Enterprise These are the factors that you need to be aware of and address in order to build successful enterprise smartphone applications.  Most of them have nothing to do with the application itself as you will see here. Managing Devices Managing devices is a factor that is going to effect how much your company will have to spend outside of developing the applications.  How will you track the devices within the corporation?  How often will you have to replace phones and as a consequence have to upgrade your applications to support new phones?  The devices can represent a significant investment of capital.  If these questions are not addressed you will find a number of hidden costs throughout the life of your solution. Purchase or BYOD We have seen the trend of Bring Your Own Device (BYOD) lately within the enterprise.  How many meetings have you been in where someone is on their personal iPad, iPhone, Android phone or Windows Phone?  The issue is if you can afford to support everyone's choice in device? That is a lot to take on even if you only support the current release of each platform. Do you go with the most popular device or do you pick a platform that best matches your current ecosystem and distribute company owned devices?  There is no easy answer here, but you should be able give some dollar value to both hardware and development costs related to platform coverage. Asset Tracking/Insurance Smartphones are devices that are easier to lose or have stolen than laptops and desktops. Not only do you have your normal asset management concerns but also assignment of financial responsibility. You also will need to insure them against damage and theft and add legal documents that spell out the responsibilities of the employees that use these devices. Personal vs. Corporate Data What happens when you terminate an employee?  How do you recover the device?  What happens when they have put personal data on the device?  These are all situation that can cause possible loss of corporate intellectual property or legal repercussions of reclaiming a device with personal data on it.  Policies need to be put in place that protect the company from being exposed to type of loss.  This can mean significant legal and procedural cost that you need to consider. Coming Up In the last installment of this series I will cover application development considerations. del.icio.us Tags: Smartphones,Enterprise Smartphone Apps,Architecture

  Read the article

• How can I improve the battery life under 12.04 on my Inspiron 14z? [duplicate]

  - by cfogelberg

  This question already has an answer here: Tips to extend battery life for laptops and notebooks 24 answers How do I improve the battery life of my Inspiron 14z under Ubuntu 12.04? This laptop gets 4-5 hours of battery life using Windows (e.g. here). I've removed Windows, installed Ubuntu 12.04 and the initial battery life was only 2 hours. With some tweaks (described below) it's still only ~2.5 hours. For reference, the laptop is the latest model of the 14z: i5-3337U processor 32GB MSATA, 500GB HDD (5400rpm) AMD Radeon HD7570M graphics card I have put ext4 partitions on both the SSD and the HDD, and have mounted / to the SSD and /home to the HDD. I also put a 24gb linux swap partition at the start of the HDD, though I figure this won't be used all that much (the laptop has 8gb of RAM). After googling around and reading Ask Ubuntu and other sites extensively, I have done the following steps, and they have improved the battery life ~30 minutes (exact improvement not clear, but battery life is still nowhere near 4-5 hours). Installed Jupiter (and set Performance to "Power Saving") Installed laptop-mode-tools cat /proc/sys/vm/laptop_mode now outputs 5 (previously it output 0) But it's not clear that this will help: AskUbuntu question Turned down the brightness of my screen from full to 1/3 Other things I have heard about but have not tried for fear of frying the laptop or my linux install: Add "pcie_aspm=force" at the end of the line with "quiet splash" in /boot/grub/grub.cfg Enable ALPM, but it may already be enabled in 12.04? Enable i915 framebuffer compression Use a propietary driver for the graphics card? Turn off the graphics card? (what would happen if I relied on the internal Intel bridge?) Use TLP? Spin down the HDD more aggressively (howto, but I think laptop-mode-tools does this already) The only other thing I've noticed is that plastic just above the F5, F6 and F7 keys gets really hot. According to Jupiter my CPU temperature is only 69 celsius and the System Monitor shows CPU load at 7% so I don't think it's the CPU. Maybe it's the graphics card? Also, I've set up MongoDB and LAMP on the machine as well. When I run powertop MongoDB is high in the list, but I'm not sure if that's relevant to battery life because I'm not actually doing anything with MongoDB most of the time. Edit - Additional info as requested $ lspci -nnk | grep -iEA3 "(graphics|vga)" 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) Subsystem: Dell Device [1028:057f] Kernel driver in use: i915 Kernel modules: i915 -- 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] [1002:6841] Subsystem: Dell Device [1028:057f] Kernel driver in use: radeon Kernel modules: radeon

  Read the article

• EF Doesn't Like Same Named Tables

  - by Anthony Trudeau

  Originally posted on: http://geekswithblogs.net/tonyt/archive/2013/07/02/153327.aspxIt's another week and another restriction imposed by the Entity Framework (EF). Don't get me wrong. I like EF, but I don't like how it restricts you in different ways. At this point you may be asking yourself the question: how can you have more than one table with the same name?The answer is to have tables in different schemas. I do this to partition the data based on the area of concern. It allows security to be assigned conveniently. A lot of people don't use schemas. I love them. But this article isn't about schemas.In the situation I have two tables:Contact.PersonEmployee.PersonThe first contains the basic, more public information such as the name. The second contains mostly HR specific information. I then mapped these tables to two classes. I stuck to a Table per Class (TPC) mapping, because of problems I've had in the past implementing inheritance with EF. The following code gives you the basic contents of the classes.[Table("Person", Schema = "Employee")]public class Employee {   ...   public int PersonId { get; set; }   [ForeignKey("PersonId")]   public virtual Person Person { get; set; }}[Table("Person", Schema = "Contact")]public class Person {   [Key]   public int Id { get; set; }   ...}This seemingly simple scenario just doesn't work. The problem occurs when you try to add a Person to the DbContext. You get an InvalidOperationException with the following text:The entity types 'Employee' and 'Person' cannot share table 'People' because they are not in the same type hierarchy or do not have a valid one to one foreign key relationship with matching primary keys between them..This is interesting for a couple of reasons. First, there is no People table in my database. Second, I have used the SetInitializer method to stop a database from being created, so it shouldn't be thinking about new tables.The solution to my problem was to change the name of my Employee.Person table. I decided to name it Employee.Employee. It's not ideal, but it gets me past the EF limitation. I hope that this article will help someone else that has the same problem.

  Read the article

• Blank desktop after updates today, only unity2d works now [closed]

  - by NewUbuntuUser

  Possible Duplicate: Unity doesn't load, no Launcher, no Dash appears I have been using 12.04 (wubi) since a week now and this is my 1st exposure to linux. Everything was going on fine till now , but today as soon as I updated through the update manager , docky gave a message that compositing is required or something, and i got an error window which asked me to report the error and then the update manager asked me to reboot. After rebooting , i just get a blank desktop screen , no launcher, no toolbar. I have to restart with the power key. However if i login through Unity 2d everything is fine except the benefits of the 3d environment. I guess something got messed up after the update and i cant figure out which program or file caused this mess. I would highly appreciate if someone could help me out with this as I really liked working on ubuntu after windows 7. Thanks! SOLVED-- Thanks @jrg for the link provided.. it helped me to come out of this mess. Actually some update of compizconfig made the unity plugin inactive did something to the Animation add ons , the one which you use for the burn effect etc. What i did was : On the blank desktop Pressed keys Ctrl + Alt + T to bring up the terminal and typed ccsm This brought up the compiz config system manager, there i enabled the unity plugin and rebooted. Everything started working fine. But then again when i started the addons plugin ,everything went back to square one.. :( . This time pressing Ctrl + Alt + T also did not help. Then i tried Ctrl + Alt + F1 , it brought up a terminal or whatever u call it, and then i typed unity --reset , it did some resetting and in the end it showed some comositing done , I pressed Ctrl + Alt + F7 to come back to the desktop , and here it was , my old sweet desktop.. it had the animation effects too like wobbly windows, excepting the addons like the burn effect, i guess something got wrong with the last update of that addon plugin and now whenever i try turning that on , everything goes poof!! 6 hours wasted , but i guess i learnt something new.. not bad for an orthodontist i guess :))

  Read the article

• Using extension methods to decrease the surface area of a C# interface

  - by brian_ritchie

  An interface defines a contract to be implemented by one or more classes.  One of the keys to a well-designed interface is defining a very specific range of functionality. The profile of the interface should be limited to a single purpose & should have the minimum methods required to implement this functionality.  Keeping the interface tight will keep those implementing the interface from getting lazy & not implementing it properly.  I've seen too many overly broad interfaces that aren't fully implemented by developers.  Instead, they just throw a NotImplementedException for the method they didn't implement. One way to help with this issue, is by using extension methods to move overloaded method definitions outside of the interface. Consider the following example: .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: public interface IFileTransfer 2: { 3: void SendFile(Stream stream, Uri destination); 4: } 5:   6: public static class IFileTransferExtension 7: { 8: public static void SendFile(this IFileTransfer transfer, 9: string Filename, Uri destination) 10: { 11: using (var fs = File.OpenRead(Filename)) 12: { 13: transfer.SendFile(fs, destination); 14: } 15: } 16: } 17:   18: public static class TestIFileTransfer 19: { 20: static void Main() 21: { 22: IFileTransfer transfer = new FTPFileTransfer("user", "pass"); 23: transfer.SendFile(filename, new Uri("ftp://ftp.test.com")); 24: } 25: } In this example, you may have a number of overloads that uses different mechanisms for specifying the source file. The great part is, you don't need to implement these methods on each of your derived classes.  This gives you a better interface and better code reuse.

  Read the article

• Finding "Stuff" In OUM

  - by Dave Burke

  One of the first questions people asked when they start using the Oracle Unified Method (OUM) is “how do I find X ?” Well of course no one is really looking for “X”!! but typically an OUM user might know the Task ID, or part of the Task Name, or maybe they just want to find out if there is any content within OUM that is related to a couple of keys words they have in their mind. Here are three quick tips I give people: 1. Open up one of the OUM Views, then click “Expand All”, and then use your Browser’s search function to locate a key Word. For example, Google Chrome or Internet Explorer: <CTRL> F, then type in a key Word, i.e. Architecture This is fast and easy option to use, but it only searches the current OUM page 2. Use the PDF view of OUM Open up one of the OUM Views, and then click the PDF View button located at the top of the View. Depending on your Browser’s settings, the PDF file will either open up in a new Window, or be saved to your local machine. In either case, once the PDF file is open, you can use the built in PDF search commands to search for key words across a large portion of the OUM Method Pack. This is great option for searching the entire Full Method View of OUM, including linked HTML pages, however the search will not included linked Documents, i.e. Word, Excel. 3. Use your operating systems file index to search for key words This is my favorite option, and one I use virtually every day. I happen to use Windows Search, but you could also use Google Desktop Search, of Finder on a MAC. All you need to do (on a Windows machine) is to make sure your local OUM folder structure is included in the Windows Index. Go to Control Panel, select Indexing Options, and ensure your OUM folder is included in the Index, i.e. C:/METHOD/OM40/OUM_5.6 Once your OUM folders are indexed, just open up Windows Search (or Google Desktop Search) and type in your key worlds, i.e. Unit Testing The reason I use this option the most is because the Search will take place across the entire content of the Indexed folders, included linked files. Happy searching!

  Read the article

• how did Google Analytics kill my site?

  - by user1813359

  Yesterday I created a google analytics profile for one of my sites and included the JS block in the layout template. What happened next was very strange. Within about 2 minutes, the site had become unreachable. I had been checking the AWStats page for the site when I thought to set up GA. After that had been done, I clicked on the link for 404 stats, which opens in a new tab. It churned for a long while and then showed a nearly blank page, similar to that when Firefox chokes on a badly-formatted XML page, except there was no error msg. But i was logged into the server and could see that that page has a 401 Transitional DTD. Strange! I tried viewing source but it just churned endlessly. I then tried "inspect element" and was able to see an error msg having to do with some internal Firefox lib. Unfortunately, i neglected to copy that. :-( All further attempts to load anything on the site would time out. Firebug's Net panel showed no request being made. Chrome would time out. So, I deleted the GA profile, removed the JS block, and cleared the server cache. No joy. I then removed all google cookies and disabled JS. Still nothing. No luck in any other browser. And now my client couldn't access the site. Terrific. I was able use wget while logged into another server. The retrieved page was fine, and did not contain the GA JS block. However, the two servers are on the same network. (Perhaps a clue.) The server itself was fine. Ping, traceroute looked great. I could SSH in. I tailed the access log and tried a browser request. Nothing. But i forgot to quit and a minute or so later I saw a request from someone else being logged. Later, I could see that requests had been served all day to some people. Now, 24 hours later, the site works once again, but is still unreachable by the client (who is in another city). So, does anyone have some insight into what's going on? Does this have something to do with google's CDN? I don't know very much about how GA works but what I'm seeing reminds me of DNS propagation issues. And why the initial XML error? And why the heck was the site just plain unreachable? What did google do to my site?! Sorry for the length but I wanted to cover everything.

  Read the article

• Visual Studio 2010/2012 Context Menus and a Keyboard

  - by SergeyPopov

  As a software developer, I spend a lot of time using Visual Studio. I have to say that I completely satisfied with Visual Studio generally. Nevertheless, sometimes Visual Studio starts annoying me. One issue which poisoned my existence for a long time is that context menu behavior in VS2010 is a little different than it was in VS2005/2008. Unfortunately, in VS2012 this behavior remains the same as in VS2010. So, what is the issue? Working with Visual Studio, I use the keyboard in most cases. I also use the Apps key on the keyboard to open context menus in the code editor. Moreover, long time ago I am got used to using some key sequences, and press the keys without even thinking. In VS2008, a mouse pointer position didn’t affect context menu navigation if I used the keyboard. Every time I opened a context menu I was sure that, for example, the "Apps, Down, Down, Enter, Up, Enter" key sequence always invoke "Organize Usings > Remove and Sort" function. But in VS2010, this behavior has been changed. If a mouse pointer is located over an opened context menu, the menu item under the mouse pointer becomes selected immediately! So, now the "Apps, Down, Down, Enter, Up, Enter" key sequence will not lead to expected results all the time. In some cases, the result may be a little scary. If you are using Visual SVN extension, this key sequence may invoke "Revert whole file" function. Of course, this is not a fatal problem because "Undo" function restores all the changes, but this behavior strongly annoys me. In Visual Studio 2012, context menu behavior is a little different than in VS2010, but a mouse pointer position still affects the keyboard navigation in the context menu, and this behavior is still annoying. I tried to find the way how to change this behavior, but I didn’t manage to find the answer quickly. Then I decided to go right though, so I wrote a small utility which fixes this issue. This utility watches for Apps key, and if the key is pressed in Visual Studio, the utility moves the mouse pointer to the top of the screen before opening the context menu. You can find binaries and the source code of this utility here: http://code.google.com/p/vs-ctx-menu-fix/downloads/list This utility works fine in Windows 7 and Windows 8 x64. I wrote the first version in January, 2011; now I just added Visual Studio 2012 support. I hope you will find this utility useful! :)

  Read the article

• Reasons NOT to use JSF [closed]

  - by Vain Fellowman

  I am new to StackExchange, but I figured you would be able to help me. We're crating a new Java Enterprise application, replacing an legacy JSP solution. Due to many many changes, the UI and parts of the business logic will completely be rethought and reimplemented. Our first thought was JSF, as it is the standard in Java EE. At first I had a good impression. But now I am trying to implement a functional prototype, and have some really serious concerns about using it. First of all, it creates the worst, most cluttered invalid pseudo-HTML/CSS/JS mix I've ever seen. It violates every single rule I learned in web-development. Furthermore it throws together, what never should be so tightly coupled: Layout, Design, Logic and Communication with the server. I don't see how I would be able to extend this output comfortably, whether styling with CSS, adding UI candy (like configurable hot-keys, drag-and-drop widgets) or whatever. Secondly, it is way too complicated. Its complexity is outstanding. If you ask me, it's a poor abstraction of basic web technologies, crippled and useless in the end. What benefits do I have? None, if you think about. Hundreds of components? I see ten-thousands of HTML/CSS snippets, ten-thousands of JavaScript snippets and thousands of jQuery plug-ins in addition. It solves really many problems - we wouldn't have if we wouldn't use JSF. Or the front-controller pattern at all. And Lastly, I think we will have to start over in, say 2 years. I don't see how I can implement all of our first GUI mock-up (Besides; we have no JSF Expert in our team). Maybe we could hack it together somehow. And then there will be more. I'm sure we could hack our hack. But at some point, we'll be stuck. Due to everything above the service tier is in control of JSF. And we will have to start over. My suggestion would be to implement a REST api, using JAX-RS. Then create a HTML5/Javascript client with client side MVC. (or some flavor of MVC..) By the way; we will need the REST api anyway, as we are developing a partial Android front-end, too. I doubt, that JSF is the best solution nowadays. As the Internet is evolving, I really don't see why we should use this 'rake'. Now, what are pros/cons? How can I emphasize my point to not use JSF? What are strong points to use JSF over my suggestion?

  Read the article

• Ubuntu boot hangs after message "Running /scripts/init-bottom ... done"

  - by Douglas B. Staple

  I've been trying to copy a Proxmox container based on the Ubuntu Precise Standard template to a VirtualBox VM. I am now stuck at a point where my new Ubuntu/VirtualBox VM hangs after the message "Running /scripts/init-bottom ... done" during boot. I started by installing Ubuntu Server 12.04.4 LTS on a VirtualBox VM. Ubuntu Server 12.04.4 LTS was the closest "official" Ubuntu ISO to the Proxmox container OS I could find. I installed all updates on both the Proxmox container and on the VirtualBox VM. The idea was to get same version kernal running on the ProxMox container and VirtualBox VM. sudo apt-get update ; sudo apt-get upgrade ; sudo apt-get dist-upgrade sudo reboot rsync the entire proxmox container to a temporary directory in the VirtualBox VM: cd / mkdir /tmp/backup rsync -e ssh -av --exclude={/dev,/proc,/sys,/tmp,/run,/mnt,/media,/lost+found,/boot,/selinux} root@my_proxmox_container_hostname:/ /tmp/backup Shut down the virtual machine, and boot the VM with a bootable linux image. I used the Desktop image of Ubuntu 12.04 LTS, ubuntu-12.04.4-desktop-i386.iso Drop to a root prompt. Mount the VM root filesystem: sudo mount /dev/sda1 /mnt Remove files from most of /mnt cd /mnt sudo rm -rf bin etc home lib opt sbin root usr var Move all of the files from /mnt/backup into /mnt sudo mv /mnt/tmp/backup/* /mnt Rebooted system. For me, at this point the system freezes after starting, after the message: Running /scripts/init-bottom ... done I've tried reinstalling GRUB and all manner of other thing. I am almost ready to give up.

  Read the article

• SChannel "cannot find certificate in either LocalMachine or CurrentUser store"

  - by Chris J

  We have an in-house application that requires the use of client SSL certificates to authenticate with a remote server (not under our control). This has worked without problems before but on deploying to a new server, we're having problems getting Windows 2008 to use the certificate. The certificate exists as a .pfx file that contains a private key. The same certificate exists in the LocalMachine store, again with its private key. We've ensured the one in the LocalMachine store is correct by creating a website in IIS against that certificate, so we're happy that the certificate, certificate chain, and private key is valid. The PFX has been created by exporting from the Certificates MMC snap-in. The issue is that we get the following in the system diagnostic logs that suggests it can't find the private key: System.Net Information: 0 : [5988] SecureChannel#23264094 – Locating the private key for the certificate: [Subject] CN=internal-server.company.com, OU=Servers, OU=Devices, O=org [Issuer] CN=SubCA02, OU=CA, o=org [Serial Number] 407ABCDE [Not Before] 31/10/2013 11:08:48 AM [Not After] 31/10/2016 11:08:48 AM [Thumbprint] 4354A34F6004F019E60F055979A47E50F62D1504 . System.Net Information: 0 : [5988] SecureChannel#23264094 – Cannot find the certificate in either the LocalMachine store or the CurrentUser store. I've validated the thumbprint, issuer and serial number listed in the log with the certificate in the LocalMachine store and these marry up. From what I can tell with much searching, this appears to be a permissions issue. The user the application is running as has been granted access to the private key (Personal Certificates - right click on the certificate - all tasks - Manage Private Keys), so I'm now at a loss as to which permission(s) it may be that is causing the issue.

  Read the article

• Supermicro BIOS recovery - SUPER.ROM

  - by Goyuix

  I have a Supermicro X9SCL+-F motherboard that I flashed a beta BIOS to, then the flash went bad when I tried to flash back to the latest stable. I am attempting to recover using their SUPER.ROM recovery from a flash drive without success. I read in the manual that if I hold down Ctrl +Home  while powering on the server I can do a BIOS recovery from a flash drive. I hold down those keys, hear the desired two beeps and I can see the activity LED on the flash drive activate. Unfortunately, instead of the monitor turning on and allowing a BIOS recovery as the manual indicates, I hear five beeps, followed shortly after by 3 beeps. I grabbed the latest BIOS from their site (x9scm2.508.zip) and extracted it to my flash drive and renamed it to SUPER.ROM. Their instructions are not clear if any ROM can serve as the SUPER.ROM file, or if I need a special SUPER.ROM file to initiate the recovery at which time I can supply a known good ROM. Does anyone have any expertise in ROM recovery for Supermicro boards? Am I missing some key step? Can any known good ROM file function as the SUPER.ROM file for recovery?

  Read the article

• Pain removing a perl rootkit

  - by paul.ago

  So, we host a geoservice webserver thing at the office. Someone apparently broke into this box (probably via ftp or ssh), and put some kind of irc-managed rootkit thing. Now I'm trying to clean the whole thing up, I found the process pid who tries to connect via irc, but i can't figure out who's the invoking process (already looked with ps, pstree, lsof) The process is a perl script owned by www user, but ps aux |grep displays a fake file path on the last column. Is there another way to trace that pid and catch the invoker? Forgot to mention: the kernel is 2.6.23, which is exploitable to become root, but I can't touch this machine too much, so I can't upgrade the kernel EDIT: lsof might help: lsof -p 9481 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAMEss perl 9481 www cwd DIR 8,2 608 2 /ss perl 9481 www rtd DIR 8,2 608 2 /ss perl 9481 www txt REG 8,2 1168928 38385 /usr/bin/perl5.8.8ss perl 9481 www mem REG 8,2 135348 23286 /lib64/ld-2.5.soss perl 9481 www mem REG 8,2 103711 23295 /lib64/libnsl-2.5.soss perl 9481 www mem REG 8,2 19112 23292 /lib64/libdl-2.5.soss perl 9481 www mem REG 8,2 586243 23293 /lib64/libm-2.5.soss perl 9481 www mem REG 8,2 27041 23291 /lib64/libcrypt-2.5.soss perl 9481 www mem REG 8,2 14262 23307 /lib64/libutil-2.5.soss perl 9481 www mem REG 8,2 128642 23303 /lib64/libpthread-2.5.soss perl 9481 www mem REG 8,2 1602809 23289 /lib64/libc-2.5.soss perl 9481 www mem REG 8,2 19256 38662 /usr/lib64/perl5/5.8.8/x86_64-linux-threa d-multi/auto/IO/IO.soss perl 9481 www mem REG 8,2 21328 38877 /usr/lib64/perl5/5.8.8/x86_64-linux-threa d-multi/auto/Socket/Socket.soss perl 9481 www mem REG 8,2 52512 23298 /lib64/libnss_files-2.5.soss perl 9481 www 0r FIFO 0,5 1068892 pipess perl 9481 www 1w FIFO 0,5 1071920 pipess perl 9481 www 2w FIFO 0,5 1068894 pipess perl 9481 www 3u IPv4 130646198 TCP 192.168.90.7:60321-www.**.net:ircd (SYN_SENT)

  Read the article

• vCenter appliance won't use mail relay server

  - by Safado

  tl;dr: - sendmail is configured to use a relay server but still insists on using 127.0.01 as the relay, which results in mail not being sent. We have the open source vCenter appliance (v 5.0) managing our ESXi cluster. When connected to it via vSphere Client, you can configure the SMTP relay server to use by going to Administration > vCenter Server Settings > MAIL. There you can set the SMTP Server value. I looked through their documentation and also confirmed on the phone with support that all you have to do to configure mail is to put in the relay IP or fqdn in that box and hit OK. Well, I had done that and mail still wasn't sending. So I SSH into the server (which is SuSE) and look at /var/log/mail and it looks like it's trying to relay the email through 127.0.0.1 and it's rejecting it. So looking through the config files, I see there's /etc/sendmail.cf and /etc/mail/submit.cf. You can configure items in /etc/sysconfig/sendmail and run SuSEconfig --module sendmail to generate those to .cf files based on what's in /etc/sysconfig/sendmail. So playing around, I see that when you set the SMTP Server value in the vCenter gui, all that it does is change the "DS" line in /etc/mail/submit.cf to have DS[myrelayserver.com]. Looking on the internet, it would appear that the DS line is really the only thing you need to change in order to use a relay server. I got on the phone with VMWare support and spent 2 hours trying to modify ANY setting that had anything to do with relays and we couldn't get it to NOT use 127.0.0.1 as the relay. Just to note, any time we made any sort of configuration change, we restarted the sendmail service. Does anyone know whats going on? Have any ideas on how I can fix this?

  Read the article

• OSX - User home directories shared via NFS

  - by Hugh

  Hi, I've run into some problems with how I've got user home directories set up on our system here. Our server is an XServe, using Open Directory to manage the user accounts. The majority of our workstations are OSX, but there are a few running Linux (Centos 5.3), and, as time goes on, we expect the proportion of Linux workstations to increase (at some point, we expect to move the server side over to Linux too, but for now we're running with what we've already got) To ensure that the Linux and OSX workstations both see user's home directories in the same place, I shared the home directories using NFS. On the server end, the home directories are stored in: /Volumes/data/company_users This is mounted on the workstations to: /mount/company_users This work fine on the Linux workstations, but there is some weirdness under OSX. For the user who is logged in through the GUI, it all works just fine. However, if a user tries to SSH into a machine that they are not the primary user on, they often have no access to their own home directory. It looks as though OSX is trying to do something else to the user home directories mount point when you log in through the GUI.... For example, on this machine (nv001), I (hugh) am logged into the GUI. Last login: Mon Mar 8 18:17:52 on ttys011 [nv001:~] hugh% ls -al /mount/company_users total 40 drwxrwxrwx 26 hugh wheel 840 27 Jan 19:09 . drwxr-xr-x 6 admin admin 204 19 Dec 18:36 .. drwx------+ 128 hugh staff 4308 27 Feb 23:36 hugh drwx------+ 26 matt staff 840 4 Dec 14:14 matt [nv001:~] hugh% So Matt's home directory is accessible to him. However, if I try to switch to him: [nv001:~] hugh% su - matt Password: su: no directory [nv001:~] hugh% Or: [nv001:~] hugh% su matt Password: tcsh: Permission denied tcsh: Trying to start from "/mount/company_users/matt" tcsh: Trying to start from "/" [nv001:/] matt% Does anyone have any idea why it might be doing this? It's causing me all sorts of problems at the moment... The only machine that I can successfully switch users at the moment is the server that the user directories are stored on, where /mount/company_users is actually just a symlink to /Volumes/data/company_users Thanks

  Read the article

• How to stop DW20.exe running on Win 2003 Server (usual solutions already tried)

  - by Laurence

  Periodically my ASP.NET application crashes (usually because memory consumption exceeds maximum allowed by application pool) and DW20.exe starts up. This is a big problem because it uses huge amounts of memory and CPU for minutes at a time. I want to know how to stop DW20.exe from running. Please note, I have already tried these often mentioned solutions: Disabling error reporting in Control Panel System Advanced Error Reporting Disabling the Error Reporting Service Modifying the registry as in http://support.microsoft.com/kb/841477 (however I might have done this wrong - this doc says "add a DWReportee value of 1" - what I did was add a DWORD entry with hexadecimal value of 1 - is this right? Also only 2 of the 4 keys were present, so I only modified these, e.g. there was no HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\PCHealth key at all) So, zero points for suggesting any of the above (unless you can see I have modified the registry incorrectly) ! Also zero points for suggesting I resolve whatever is causing the application crashes :) - I am figuring this out, I just want something in the mean time to stop DW20.exe eating up all the server resources. By the way, this is a Windows 2003 SP1 server, with IIS 6 and SQL 2005 installed. There is no MS Office. Thx

  Read the article

• Extract Key and Certificate from Kemp Loadmaster?

  - by Matt Simmons

  I'm trying very hard to get away from a set of Kemp Loadmasters that I bought years ago to provide HA access to our website. Part of that process is going to be putting the key and certificate in the new solution (HAproxy with nginx doing SSL). Unfortunately, I've come up against a problem... The Kemp has built-in certificate management, and it generates CSR's at the touch of a button. It also supported importing of signed certificates, however it does not, so far as I can tell, allow any kind of export of the key itself. There is a "backup key and certificates" ability, however here's the text from the manual: LoadMaster supports exporting of ALL certificate information. This includes private key, host and intermediate certificates. The export file is designed to be used for import into another LoadMaster and is encrypted. Export and import can be completed using the WUI at Certificates -> Backup/Restore Certs. Please make sure to note the pass phrase used to create the export, it will be required to complete the import. You can selectively resort only Virtual Service certificates including private keys, intermediate certificates or both. Well, that is great, but as for actually DEALING with the certs, I'm apparently out of luck. Of course, I'm not going to give up that easily. I ran "file" on the saved cert bundle and got this: $ file client1.certs.backup client1.certs.backup: gzip compressed data, from Unix Well, awesome, I thought. Maybe it's just a .tar.gz, so I unzipped it, and that went fine, but my attempts to untar it didn't work, and running "file" on it now just gives this: $ file client1.certs.backup client1.certs.backup: data So that's where I'm stuck. Anyone have experience with these?

  Read the article

• Invalid format for New Relic licence when installing on Elastic Beanstalk

  - by BenFreke

  We've created an app that is running on an Elastic Beanstalk instance, 64 bit PHP version 5.4 (so not legacy). I've used the New Relic installation instructions to install New Relic, and viewing phpinfo shows that New Relic is installed. However, I'm not getting any data in New Relic and that is because it is saying that the licence is ***invalid format*** under newrelic.licence I'm getting the licence from my New Relic account, and it is a 40 character hexadecimal string. Here is the current newrelic.config file in the .ebextensions folder I'm using, with most of the licence key commented out. packages: yum: newrelic-php5: [] rpm: newrelic: http://yum.newrelic.com/pub/newrelic/el5/x86_64/newrelic-repo-5-3.noarch.rpm commands: configure_new_relic: command: newrelic-install install env: NR_INSTALL_SILENT: true NR_INSTALL_KEY: ec9a4... Skitch of relevant phpinfo Can anyone shed some light on what's going on here? I've tried two different New Relic licence keys with the same error, I've also surrounded it with a single quote mark and tried uppercase only. And at this point I'm out of ideas on what to try. We're not AWS gurus so it could very easily be something simple like not opening a port to allow the licence to be validated?

  Read the article

• javaws not found

  - by Hunt

  I have a server which has centos installed in it. Recently I have installed jdk 1.6 into it. When I try to run java command from shell it's working perfectly fine. Java is stored into /usr/java/jdk1.6.0_25 and path is set to /usr/bin/ when I type which java. When I tried running javaws (which comes with the jdk 1.6 only) it is showing me following error: Java Web Start splash screen process exiting ... Bad installation: JAVAWS_HOME not set: No such file or directory Executing env command prints following details: HOSTNAME=XX-XXX-XXX-XX TERM=xterm SHELL=/bin/bash HISTSIZE=1000 OLDPWD=/usr/java SSH_TTY=/dev/pts/1 USER=root LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35: JAVA_PATH=/usr/java/jre1.6.0_24/jre/bin MAIL=/var/spool/mail/root PATH=/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin:/usr/java/jre1.6.0_24/jre/bin INPUTRC=/etc/inputrc PWD=/usr/lib/jvm/jre-1.6.0-openjdk.x86_64/bin JAVA_HOME=/usr/java/jre1.6.0_24/jre/bin LANG=en_US.UTF-8 SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass SHLVL=1 HOME=/root LOGNAME=root JAVAWS_HOME=/usr/java/jre1.6.0_24/bin SSH_CONNECTION=175.100.170.26 3387 64.150.190.94 22 LESSOPEN=|/usr/bin/lesspipe.sh %s G_BROKEN_FILENAMES=1 _=/bin/env

  Read the article

< Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >