Search Results

Search found 9446 results on 378 pages for 'ssh keys'.

Page 310/378 | < Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >

  • mount.nfs: access denied by server while mounting (null), can't find any log information

    - by Mark0978
    Two ubuntu servers: 10.0.8.2 is the client, 192.168.20.58 is the server. Between the 2 machines, Ping works, ssh works (in both directions). From 10.0.8.2 showmount -e 192.168.20.58 Export list for 192.168.20.58: /imr/nfsshares/foobar 10.0.8.2 mount.nfs 192.168.20.58:/imr/nfsshares/foobar /var/data/foobar -v mount.nfs: access denied by server while mounting (null) Found several things online, tried them all and still can't find any log information anywhere. On the server: [email protected]:/var/log# cat /etc/hosts.allow sendmail: all ALL: 10.0.8.2 /etc/hosts.deny is all comments How can I get a trail of log statements to figure this out? What does it take to get some logging so I have some idea of WHY it won't mount? On the server: [email protected]# nmap -sR RPC 192.168.20.58 Starting Nmap 5.21 ( http://nmap.org ) at 2012-07-04 21:16 CDT Failed to resolve given hostname/IP: RPC. Note that you can't use '/mask' AND '1-4,7,100-' style IP ranges Nmap scan report for 192.168.20.58 Host is up (0.0000060s latency). Not shown: 988 closed ports PORT STATE SERVICE VERSION 22/tcp open unknown 80/tcp open unknown 111/tcp open unknown 139/tcp open unknown 445/tcp open unknown 902/tcp open unknown 2049/tcp open unknown 3000/tcp open unknown 5666/tcp open unknown 8009/tcp open unknown 8222/tcp open unknown 8333/tcp open unknown Nmap done: 1 IP address (1 host up) scanned in 3.81 seconds From the client: [email protected]:~$ nmap -sR RPC 192.168.20.58 Starting Nmap 5.21 ( http://nmap.org ) at 2012-07-04 22:14 EDT Failed to resolve given hostname/IP: RPC. Note that you can't use '/mask' AND '1-4,7,100-' style IP ranges Nmap scan report for 192.168.20.58 Host is up (0.73s latency). Not shown: 988 closed ports PORT STATE SERVICE VERSION 22/tcp open unknown 80/tcp open unknown 111/tcp open rpcbind (rpcbind V2) 2 (rpc #100000) 139/tcp open unknown 445/tcp open unknown 902/tcp open unknown 2049/tcp open nfs (nfs V2-4) 2-4 (rpc #100003) 3000/tcp open unknown 5666/tcp open unknown 8009/tcp open unknown 8222/tcp open unknown 8333/tcp open unknown Nmap done: 1 IP address (1 host up) scanned in 191.56 seconds

    Read the article

  • Account Lockout with pam_tally2 in RHEL6

    - by Aaron Copley
    I am using pam_tally2 to lockout accounts after 3 failed logins per policy, however, the connecting user does not receive the error indicating pam_tally2's action. (Via SSH.) I expect to see on the 4th attempt: Account locked due to 3 failed logins No combination of required or requisite or the order in the file seems to help. This is under Red Hat 6, and I am using /etc/pam.d/password-auth. The lockout does work as expected but the user does not receive the error described above. This causes a lot of confusion and frustration as they have no way of knowing why authentication fails when they are sure they are using the correct password. Implementation follows NSA's Guide to the Secure Conguration of Red Hat Enterprise Linux 5. (pg.45) It's my understanding that that only thing changed in PAM is that /etc/pam.d/sshd now includes /etc/pam.d/password-auth instead of system-auth. If locking out accounts after a number of incorrect login attempts is required by your security policy, implement use of pam_tally2.so. To enforce password lockout, add the following to /etc/pam.d/system-auth. First, add to the top of the auth lines: auth required pam_tally2.so deny=5 onerr=fail unlock_time=900 Second, add to the top of the account lines: account required pam_tally2.so EDIT: I get the error message by resetting pam_tally2 during one of the login attempts. user@localhost's password: (bad password) Permission denied, please try again. user@localhost's password: (bad password) Permission denied, please try again. (reset pam_tally2 from another shell) user@localhost's password: (good password) Account locked due to ... Account locked due to ... Last login: ... [user@localhost ~]$

    Read the article

  • Install a web certificate on an Android device

    - by martani_net
    To gain access to WIFI at university I have to login with my user/pass credentials. The certificate of their website (the local home page that asks for the credentials) is not recognized as a trusted certificate, so we install it separately on our computers. The problem is that I don't take my laptop with me often to university, so I usually want to connect using my HTC Magic, but I have no clue on how to install the certificate separately on Android, it is always rejected. [Edit2] : this is what is stated in their website Need for installation of official certificates CyberTrust validated by the CRU (http://www.cru.fr/wiki/scs/) The certificates contain information certified to generate encryption keys for data exchange, called "sensitive" as the password of a user. By connecting to CanalIP-UPMC, for example, the user must validate the identity of the server accepting the certificate appears on the screen in a "popup window". In reality, the user is unable to validate a certificate knowing, because a simple visual check of the license is impossible. Therefore, the certificates of the certification authority (CRU-Cybertrust Educationnal-ca.ca Cybertrust and-global-root-ca.ca) must be installed prior to the browser for the validity of the certificate server can be controlled automatically. Before you connect to the network-UPMC CanalIP you must register in your browser through the certification authority Cybertrust-Educationnal-ca.ca Download the Cybertrust-Educationnal-ca.ca, depending on your browser and select the link below : With Internet Explorer, click on the link following. With Firefox, click on the link following. With Safari, click the link following. If this procedure is not respected, a real risk is incurred by the user: that of being robbed password LDAP directory UPMC. A malicious server may in fact try very easily attack type "man-in-the-middle" by posing as the legitimate server at UPMC. The theft of a password allows the attacker to steal an identity for transactions over the Internet can engage the responsibility of the user trapped ... This is their website : http://www.canalip.upmc.fr/doc/Default.htm (in French, Google-translate it :)) Anyone knows how to install a web certificate on Android?

    Read the article

  • How to use Salt Stack with minions all behind NAT (not publicly accessible, default salt ports not open)?

    - by MountainX
    Can Salt Stack minions communicate with the salt master from behind NAT/Firewalls, etc., using standard ports that would be open be default in all consumer NAT routers (and without the minions having a public DNS record or static IP)? I'm working my way through my first salt tutorial, and this is where I'm stuck. I am able to configure iptables on the Ubuntu salt-master. But I have no control over the routers/NAT that the minions will sit behind. So far I tried these settings: /etc/salt/master: publish_port: 465 ret_port: 443 /etc/salt/minion: master_port: 465 That did not work. Background: I have a custom developed application presently running on about 40 Kubuntu laptops (& more planned). Every few months I have to update the application. (Often this just amounts to replacing a .jar file, which requires root permissions.) I also have to run Ubuntu updates and a few other minor things. I've been doing it manually, one by one, using Team Viewer to log into each client. I would like to dramatically improve this process. The two options I'm aware of are either: use reverse ssh tunnels and bash scripts. I tested this and it works. But I don't get any of the reporting, etc., I would get with Salt Stack. use Salt Stack (or similar) management tool. But I need a really simple tool. I can't invest any time in a big learning curve. I looked at Puppet and a bunch of related tools. The only one I found that looked simple enough for me (so far) was Salt Stack. But I'm stuck now because my minion can't reach the salt-master, as stated above. I appreciate suggestions.

    Read the article

  • Useful Excel keyboard shortcuts

    - by Ben Lings
    What keyboard shortcuts do you use in Excel? Things I've discovered recently and found very useful are: Shift + Space - select the current row Ctrl + Space - select the current column Ctrl + Shift + Space - select the block of contiguous cell Ctrl + + - Insert (as in the context menu). If the current row is selected, will insert a new row. Ctrl + - - Delete (as in the context menu). If the current row is selected, will delete entire row. What (apart from the normal cut, copy, paste, etc) do you use? Ctrl + 1 to open the Format dialog. Shift + F2 to add/edit a cell comment. Shift + F2, followed by Esc to select the current cell comment, which can then be moved around with the arrow keys (????) or deleted by pressing Del. Ctrl + ???? to move to the last non-blank cell in a series. This is usually the edge of a table, but not if you have blank cells in the path. Pressing End followed by an arrow key does the same thing. Alt + F11 to open the VBA editor. Alt + = to start a SUM() formula and go straight to selecting cells to be summed. Ctrl + G or F5 to jump to a cell by typing its coordinates (e.g. C3) Ctrl + Home to jump to the top left, usually A1 unless you you are in a frozen split view, in which case it will jump to the top left of the "data" area. Ctrl + ; and Ctrl + Shift + ; to insert the current date and time, respectively. I know Ben Lings already posted this one, but I find it indispensable.

    Read the article

  • Telnet does not give a response

    - by floorish
    Some wireless access points are acting a little weird, so I want to reboot them every couple of hours. Luckily there exists a security flaw which lets me login as root through telnet when using port 1111 (without username and password). Now I want to use that to let my QNAP NAS execute the reboot command through telnet every now and then. The problem is however that that telnet version doesn't give any response if I connect to the AP. The telnet I use on OSX works just fine but the one on the NAS not. BusyBox v1.01 (2012.06.14-18:35+0000) multi-call binary Usage: telnet [-a] [-l USER] HOST [PORT] When I execute telnet <HOST> 1111 nothing happens. I can send the escape character ^] which gives me the following options: Console escape. Commands are: l go to line mode c go to character mode z suspend telnet e exit telnet The only way to get some commands executed is by suspending telnet with z followed by some random command which isn't recognized. Then the prompt shows this: # telnet 192.168.1.5 1111 ^] Console escape. Commands are: l go to line mode c go to character mode z suspend telnet e exit telnet z continuing... asdf Illegal command. 00> After that I am able to communicate with the AP, but when I exit the telnet session and try the same again, the AP refuses to connect at all and it must be manually rebooted (looks like the telnet session isn't shut down properly on the AP). So the question is what commands should I execute in order to communicate with the AP using the Busybox telnet version of the QNAP? (No, can't use ssh unfortunately)

    Read the article

  • Error cloning gitosis-admin on new setup

    - by michaelmior
    I have the following in my gitosis.conf. (Created via gitsosis-init < id_rsa.pub with the key from my laptop) [gitosis] loglevel = DEBUG [group gitosis-admin] writable = gitosis-admin members = michael@laptop When I try git clone git@SERVER:gitsos-admin.git, I get the following errors: Initialized empty Git repository in /home/michael/gitsos-admin/.git/ DEBUG:gitosis.serve.main:Got command "git-upload-pack 'gitsos-admin.git'" DEBUG:gitosis.access.haveAccess:Access check for 'michael@laptop' as 'writable' on 'gitsos-admin.git'... DEBUG:gitosis.access.haveAccess:Stripping .git suffix from 'gitsos-admin.git', new value 'gitsos-admin' DEBUG:gitosis.group.getMembership:found 'michael@laptop' in 'gitosis-admin' DEBUG:gitosis.access.haveAccess:Access check for 'michael@laptop' as 'writeable' on 'gitsos-admin.git'... DEBUG:gitosis.access.haveAccess:Stripping .git suffix from 'gitsos-admin.git', new value 'gitsos-admin' DEBUG:gitosis.group.getMembership:found 'michael@laptop' in 'gitosis-admin' DEBUG:gitosis.access.haveAccess:Access check for 'michael@laptop' as 'readonly' on 'gitsos-admin.git'... DEBUG:gitosis.access.haveAccess:Stripping .git suffix from 'gitsos-admin.git', new value 'gitsos-admin' DEBUG:gitosis.group.getMembership:found 'michael@laptop' in 'gitosis-admin' ERROR:gitosis.serve.main:Repository read access denied fatal: The remote end hung up unexpectedly I know my key is being accepted because I have tried logging in via SSH and although a terminal won't be allocated, the authorization works.

    Read the article

  • Accidentally deleted symlink libc.so.6 in CentOS 6.4. How to get sudo privilege to re-create it?

    - by Eric
    I accidentally deleted the symbol link /lib64/libc.so.6 - /lib64/libc-2.12.so with $ sudo rm libc.so.6 Then I can not use anything including ls command. The error appears for any command I type ls: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory I've tried $ export LD_PRELOAD=/lib64/libc-2.12.so After this I can use ls and ln ..., but still can not use sudo ln ..., sudo -E ln ..., sudo su or even su. I always get this err sudo: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory or su: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory It seems LD_PRELOAD works only for the current shell session of my account, but not for a new account like root or a new session. It's a remote server so I can not use a live CD. I now have a ssh bash session alive but can not establish new ones. I have sudo privilege, but don't have root password. So currently my problem is I need to run sudo sln -s libc-2.12.so libc.so.6 to re-create the symlink libc.so.6, but I can not run sudo without libc.so.6. How can I fix it? Thanks~

    Read the article

  • postfix + opendkim not signing correctly. how to debug this?

    - by Dean Hiller
    EDIT: I did get a little further but all posts on my search say permissions are wrong or regenerate key but I fixed that to be 644 as well as owned by DKIM AND I keep regenerating the key but it is not helping. My latest error now is this Apr 21 21:19:12 Sniffy opendkim[8729]: BB5BF3AA66: dkim_eom(): resource unavailable: d2i_PrivateKey_bio() failed Apr 21 21:19:12 Sniffy postfix/cleanup[8627]: BB5BF3AA66: milter-reject: END-OF-MESSAGE from localhost[127.0.0.1]: 4.7.0 resource unavailable; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<abcs.com> I am looking for a way to simply debug this(don't necessarily need the answer but a way to get logs from opendkim would be good). If I stop opendkim, I see postfix log connection refused which is good. but when I send mail with opendkim started, I see no logs whatsoever. I even add the "LogWhy Yes" line to my opendkim.conf file as well and still see no logs there. Since I see opendkim running under user opendkim, I changed the owner of /etc/opendkim/* and /etc/opendkim and /etc/opendkim.conf all to opendkim user. I am running on ubuntu. My opendkim.conf file is # Log to syslog Syslog yes # Required to use local socket with MTAs that access the socket as a non- # privileged user (e.g. Postfix) UMask 002 # Sign for example.com with key in /etc/mail/dkim.key using # selector '2007' (e.g. 2007._domainkey.example.com) #Domain example.com Domain sniffyapp.com #KeyFile /etc/mail/dkim.key KeyFile /etc/opendkim/keys/sniffyapp.com/default.private #Selector 2007 Selector default # Commonly-used options; the commented-out versions show the defaults. #Canonicalization simple Mode sv #SubDomains no #ADSPDiscard no Socket inet:8891:localhost ExternalIgnoreList refile:/etc/opendkim/TrustedHosts InternalHosts refile:/etc/opendkim/TrustedHosts LogWhy Yes I of course have these lines added to main.cf in postgres smtpd_milters = inet:127.0.0.1:8891 non_smtpd_milters = $smtpd_milters milter_default_action = accept

    Read the article

  • Installing PHP4 on a Debian (lenny) 7 32bit box

    - by Asim
    I am trying to install PHP4 on a Debian 7 32bit box but I ran into the following root@php4:~# apt-get update Get:1 http://snapshot.debian.org lenny Release.gpg [189 B] Hit http://snapshot.debian.org lenny Release Ign http://snapshot.debian.org lenny Release Hit http://snapshot.debian.org lenny/main Sources/DiffIndex Hit http://snapshot.debian.org lenny/main i386 Packages/DiffIndex Hit http://ftp.us.debian.org wheezy Release.gpg Hit http://security.debian.org wheezy/updates Release.gpg Ign http://snapshot.debian.org lenny/main Translation-en_US Ign http://snapshot.debian.org lenny/main Translation-en Hit http://ftp.us.debian.org wheezy Release Hit http://security.debian.org wheezy/updates Release Hit http://ftp.us.debian.org wheezy/main i386 Packages Hit http://ftp.us.debian.org wheezy/main Translation-en Hit http://security.debian.org wheezy/updates/main i386 Packages Hit http://security.debian.org wheezy/updates/main Translation-en Fetched 189 B in 0s (229 B/s) Reading package lists... Done W: GPG error: http://snapshot.debian.org lenny Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY A70DAF536070D3A1 I did the following to fix it gpg --keyserver hkp://subkeys.pgp.net --recv-keys A70DAF536070D3A1 gpg --export --armor A70DAF536070D3A1 | sudo apt-key add - Now I get the following KEYEXPIRED error and unsure how to fix. Even Google does not help root@php4:~# apt-get update Get:1 http://snapshot.debian.org lenny Release.gpg [189 B] Hit http://snapshot.debian.org lenny Release Ign http://snapshot.debian.org lenny Release Hit http://snapshot.debian.org lenny/main Sources/DiffIndex Hit http://security.debian.org wheezy/updates Release.gpg Hit http://snapshot.debian.org lenny/main i386 Packages/DiffIndex Hit http://ftp.us.debian.org wheezy Release.gpg Hit http://security.debian.org wheezy/updates Release Ign http://snapshot.debian.org lenny/main Translation-en_US Hit http://ftp.us.debian.org wheezy Release Hit http://security.debian.org wheezy/updates/main i386 Packages Ign http://snapshot.debian.org lenny/main Translation-en Hit http://ftp.us.debian.org wheezy/main i386 Packages Hit http://security.debian.org wheezy/updates/main Translation-en Hit http://ftp.us.debian.org wheezy/main Translation-en Fetched 189 B in 0s (275 B/s) Reading package lists... Done W: GPG error: http://snapshot.debian.org lenny Release: The following signatures were invalid: KEYEXPIRED 1246455239 Any help?

    Read the article

  • QoS for Cisco Router to Prioritize Voice and Interactive Traffic

    - by TJ Huffington
    I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

    Read the article

  • QoS for Cisco Router to Prioritize Voice and Interactive Traffic

    - by TJ Huffington
    I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

    Read the article

  • Accessing network shares on Windows7 via SonicWall VPN client

    - by Jack Lloyd
    I'm running Windows7 x64 (fully patched) and the SonicWall 4.2.6.0305 client (64-bit, claims to support Windows7). I can login to the VPN and access network resources (eg SSH to a machine that lives behind the VPN). However I cannot seem to be able to access shared filesystems. Windows is refusing to do discovery on the VPN network. I suspect part of the problem is Windows persistently considers the VPN connection to be a 'public network'. Normally, you can open the network and sharing center and modify this setting, however it does not give me a choice for the VPN. So I did the expedient thing and turned on file sharing for public networks. I also disabled the Windows firewall for good measure. Still no luck. I can access the server directly by putting \\192.168.1.240 in the taskbar, which brings up the list of shares on the server. However, trying to open any of the shares simply tells me "Windows cannot access \\192.168.1.240\share You do not have permission to access ..."; it never asks for a domain password. I also tried Windows7 native VPN functionality - it couldn't successfully connect to the VPN at all. I suspect this is because SonicWall is using some obnoxious special/undocumented authentication system; I had similar problems trying to connect on Linux with the normal IPsec tools there. What magical invocation or control panel option am I missing that will let this work? Are there any reasonable debugging strategies? I'm feeling quite frustrated at Windows tendency to not give me much useful information that might let me understand what it is trying to do and what is going wrong.

    Read the article

  • Unable to connect to Postgres on Vagrant Box - Connection refused

    - by Ben Miller
    First off, I'm new to Vagrant and Postgres. I created my Vagrant instance using http://files.vagrantup.com/lucid32.box with out any trouble. I am able to run vagrant up and vagrant ssh with out issue. I followed the instructions http://blog.crowdint.com/2011/08/11/postgresql-in-vagrant.html with one minor alteration. I installed "postgresql-8.4-postgis" package instead of "postgresql postgresql-contrib" I started the server using: postgres@lucid32:/home/vagrant$ /etc/init.d/postgresql-8.4 start While connected to the vagrant instance I can use psql to connect to the instance with out issue. In my Vagrantfile I had already added: config.vm.forward_port 5432, 5432 but when I try to run psql from localhost I get: psql: could not connect to server: Connection refused Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"? I'm sure I am missing something simple. Any ideas? Update: I found a reference to an issue like this and the article suggested using: psql -U postgres -h localhost with that I get: psql: server closed the connection unexpectedly This probably means the server terminated abnormally before or while processing the request.

    Read the article

  • OpenVpn Iptables Error

    - by Mook
    I mean real newbie - linux here.. Please help me configuring my openvpn through iptables. My main goal here is to open port for regular browsing (80, 443), email (110, 25), etc just like isp does but i want to block p2p traffic. So I will need to open only few port. Here are my iptables config # Flush all current rules from iptables # iptables -F iptables -t nat -F iptables -t mangle -F # # Allow SSH connections on tcp port 22 (or whatever port you want to use) # iptables -A INPUT -p tcp --dport 22 -j ACCEPT # # Set default policies for INPUT, FORWARD and OUTPUT chains # iptables -P INPUT DROP #using DROP for INPUT is not always recommended. Change to ACCEPT if you prefer. iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT # # Set access for localhost # iptables -A INPUT -i lo -j ACCEPT # # Accept packets belonging to established and related connections # iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # #Accept connections on 1194 for vpn access from clients #Take note that the rule says "UDP", and ensure that your OpenVPN server.conf says UDP too # iptables -A INPUT -p udp --dport 1194 -j ACCEPT # #Apply forwarding for OpenVPN Tunneling # iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT #10.8.0.0 ? Check your OpenVPN server.conf to be sure iptables -A FORWARD -j REJECT iptables -t nat -A POSTROUTING -o venet0 -j SNAT --to-source 100.200.255.256 #Use your OpenVPN server's real external IP here # #Enable forwarding # echo 1 > /proc/sys/net/ipv4/ip_forward iptables -A INPUT -p tcp --dport 25 -j ACCEPT iptables -A INPUT -p tcp --dport 26 -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 110 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -L -v But when I connect to my vpn, i can't browsing and also got RTO on pinging yahoo, etc

    Read the article

  • Adding an user to samba

    - by JustMaximumPower
    I'm trying to setup some samba shares in my home network on an Ubuntu 12.04 machine. Everything works fine for my user account (max) but I can not add any new user. Every time I try to add new user they can not use the shares. It's likely that the error is very basic to the concept of samba but please don't just tell me to read the docs. I've been trying that for about 2 weeks now. I've set up the server with my user max who can mount transfer and the share max. Than I added the user simon with sudo adduser --no-create-home --disabled-login --shell /bin/false simon because the user should not be able to ssh into the machine. I did an sudo smbpasswd -a simon and set an (samba) password for simon and added an share for simon. I also added simon to transferusers to give him access to the share transfer. But simon can't connect to transfer or simons. ---- output of testparam: ------- Load smb config files from /etc/samba/smb.conf rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384) Processing section "[printers]" Processing section "[print$]" Processing section "[max]" Processing section "[simons]" Processing section "[transfer]" Loaded services file OK. Server role: ROLE_STANDALONE Press enter to see a dump of your service definitions [global] server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers [max] comment = Privater share von Max path = /media/Main/max read only = No create mask = 0700 [simons] comment = Privater share von Simon path = /media/Main/simon read only = No create mask = 0700 [transfer] comment = Transferlaufwerk path = /media/Main/transfer read only = No create mask = 0755 ---- The files in /media/Main: ------ drwxrwxr-x 17 max max 4096 Oct 4 19:13 max/ drwx------ 5 simon max 4096 Aug 4 15:18 simon/ drwxrwxr-x 7 max transferusers 258048 Oct 1 22:55 transfer/

    Read the article

  • How can I trigger the creation of a new CLB file?

    - by Xperimental
    I'm currently having a problem with an application using COM running on Windows Vista. The application runs ok on one machine, but doesn't work on a similar configured machine. Both machines are virtual images originating from the same source image. While searching the registry for causes of this error, I came across the CLBVersion key in HKCR\CLSID which seems to have something to do with COM. The value of the key differs between the two machines (0x6 on the erroneous one, 0xc on the working one). Also there are files containing the same number in their filenames in the %SystemRoot\Registration directories of the machines. They are called R000000000006.clb and R00000000000c.clb respectively. I have already searched the windows event log for anything leading to the creation of those files (I have searched by the creation date of the files). Now a few questions regarding the registry keys and the files: Is it correct, that this is connected to COM? What is the function of the files? What causes the creation of a new "CLBVersion"? Is there a way for me to trigger the creation of a new CLB file? edit: I have now found out, that this has nothing to do with my application error. But I would still be interested in details about the registry key and the files. An installation of Visual Studio 2005 has brought the second machine to the same configuration (0xc in registry and file) as the other one.

    Read the article

  • Problems during an update of cPanel / WHM

    - by haron
    I ordered a Master WHM account with the couple CentOS / cPanel. whm-cpanel.eu.pn The installation is a fresh update of the basic services was necessary (had: WHM 11.15.0 cPanel 11.17.0 WHM X v3.1.0, Apache 1.3.37, PHP 4.4.7, MySQL 4.1.22). 1 / I started to update cPanel / WHM via the command: / scripts / upcp. Everything went well until the middle of installing the server stopped responding (or ping, or ssh). The installation appears to have continued alone to the end and after some time everything is back to normal (I do not know if there was a reboot) and my interface was updated (cPanel 11.24.4-R36167 - WHM 11.24.2 - X 3.9). 2 / Then I updated via the MySQL interface tweak this in WHM then the command: / scripts / mysqlup. Here everything went fine, no problem. 3 / Finally, I wanted to upgrade Apache 2.2 / PHP 5 and I used this command: / scripts / easyapache. After selecting all the packages and modules installation is started but the same as for point 1: the server did not answer more and this time the installation did not go through. Apache 2.2 is well spent (after the second try) but PHP has remained at 4. I tried several times the same operation without success. I do not think this is a memory problem, a free-m shortly before losing communications gave nothing alarming. By cons CPU time seemed to rise up. I reinstalled the machine again the trick, same problem! Whether via the WHM interface or by Shell, the installation stops short, for 15 minutes the machine is not responding and then everything returns to normal, but no update is done in PHP. Is there a known bug in this version of cPanel / WHM? Someone he met the same problem? If I compile Apache / PHP manually, without using the script easyapache is what I might encounter problems with cPanel later? Thank you!

    Read the article

  • Ubuntu virtual memory caches suck up memory

    - by Tom
    Hey all, I've got an Ubuntu 9.10 64-bit server that seems to use up all available memory. According to my munin graphs, almost all of the memory used up is in the swap cache, cache, and slab cache. (I take this to mean virtual memory caches, am I right in assuming this?) Once memory usage approaches 100%, some (although not all) system services such as SSH become sluggish and unresponsive. After rebooting the system, performance and memory usage become normal for a time. Some interesting tidbits: The system runs Apache 2, MySQL, Munin, and sshd. The memory usage spikes happen at the same time every night (at 10 PM sharp.) There appears to be nothing in the crontab for any of the users, and nothing in /etc/cron.d/* out of the ordinary, let alone something that would occur at 10 PM. My question is, how do I figure out what is causing the memory suckage? I've tried the usual utilities (e.g. ps, top, etc) but I can't seem to find anything unusual. Any ideas? Thanks in advance!

    Read the article

  • Nagios returns "No output returned from plugin" running process

    - by user56291
    I have a nagios server and a bunch of nagios clients that i currently monitor. All the clients are setup with the following nrpe configuration. check_users, check_load... metrics are successfully displayed on the nagios interface but check_nginx and check_server_proxy displayed as "Unknown"-(No output returned from plugin). As far as i understood nagios simply runs ps command and looks for either the argument strings or the name of the command to verify whether the service is running. Also with -c flag, one can give nagios a threshold to determine the output (ie: -c 1 returns 'OK' for if it finds at least 1 process.) nrpe_local.cfg: ###################################### # Do any local nrpe configuration here ###################################### allowed_hosts =127.0.0.1,10.0.2.181 command[check_users]=/usr/lib/nagios/plugins/check_users -w 5 -c 10 command[check_load]=/usr/lib/nagios/plugins/check_load -w 15,10,5 -c 30,25,20 command[check_all_disks]=/usr/lib/nagios/plugins/check_disk -w 20% -c 10% command[check_zombie_procs]=/usr/lib/nagios/plugins/check_procs -w 5 -c 10 -s Z command[check_total_procs]=/usr/lib/nagios/plugins/check_procs -w 150 -c 200 command[check_swap]=/usr/lib/nagios/plugins/check_swap -w 50% -c 25% command[check_server_proxy]=/usr/lib/nagios/plugins/check_procs -c 1 -a "api-v1/server.js" command[check_nginx]=/usr/lib/nagios/plugins/check_procs -c 1:30 -C nginx nagios_server.cfg ... define host{ use generic-host ; Name of host template to use host_name plum alias plum address 10.0.2.88 check_command check-host-alive-by-ssh } ... #Check api-proxy-server define service{ use generic-service host_name plum service_description check api proxy service check_command check_nrpe!check_server_proxy } define service { use generic-service ; Name of service template to use host_name plum service_description CHECK_NGINX check_period 24x7 max_check_attempts 3 normal_check_interval 5 retry_check_interval 3 check_command check_nrpe!check_nginx notifications_enabled 1 } Also when i run the command on the nagios client: /usr/lib/nagios/plugins/check_procs -c 1 -a "api-v1/server.js" I get the desired output PROCS OK: 1 process with args 'api-v1/server.js' I would really appreciate any pointers that might help me solve why it nrpe command does not return the desired output on the nagios server panel.

    Read the article

  • Can ping IP address and nslookup hostname but cannot ping hostname

    - by Puddingfox
    I have a DNS server set up on one of my machines using BIND 9.7 Everything works fine with it. On my Windows 7 desktop, I have statically-assigned all network values. I have one DNS server set -- my DNS server. On my desktop, I can ping a third machine by IP fine. I can nslookup the hostname of the third machine fine. When I ping the hostname, it says it cannot find the host. / C:\Users\James>nslookup icecream Server: cake.my.domain Address: xxx.xxx.6.3 Name: icecream.my.domain Address: xxx.xxx.6.9 C:\Users\James>ping xxx.xxx.6.9 Pinging xxx.xxx.6.9 with 32 bytes of data: Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Reply from xxx.xxx.6.9: bytes=32 time<1ms TTL=255 Ping statistics for xxx.xxx.6.9: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\Users\James>ping icecream Ping request could not find host icecream. Please check the name and try again. I have also specified the search domain as my.domain xxx.xxx and my.domain substituted for security Why can I not ping by hostname? I also can not ping using the FQDN. The problem is that this problem is shared by all applications that resolve hostnames. I cannot use PuTTY to SSH to my machines by hostname; only by IP

    Read the article

  • pros and cons with server management gui tools to manage linux web servers

    - by ajsie
    i have stumbled upon these GUI tools that could help you manage your linux server through a web interface. ebox, webmin, ispconfig, zivios, ispcp, plesk, cpanel etc. i wonder what the pros and cons are with these solutions. a lot of people is saying that they are not as good as using pure command line (ssh) to manage your server. but i think thats yet another "linux are for advanced users" talk. i agree that a lot of things may only be done with the command line by editing directly in the configuration files. but i don't really want to do that every time and for everything. especially basic configurations these could manage. its like not having phpmyadmin for managing mysql. it would be a pain in the ass right? so if one wants to throw up a web server serving a php site oneself developed and wants all the usual stuff up and running (mysql, phpmyadmin, svn, webdav etc) is these tools the right way to go? and for more advanced features, one just use the terminal like old days. is this a smart way of managing a linux server? and which one would you choose? have you used any of these and could share your thoughts about them?

    Read the article

  • Any Recommendations for a Web Based Large File Transfer System?

    - by Glen Richards
    I'm looking for a server software product that: Allows my users to share large files with: The general public securely to 1 or more people (notification via email, optionally with a token that gives them x period of time to download) Allows anyone in the general public to share files with my users. Perhaps by invitation. Has to be user friendly enough to allow my users to use this with out having to bug me as the admin. It needs to be a system that we can install on our own server (we don't want shared data sitting on anyone else's server) A web based solution. Using some kind or secure comms channel would be good too, eg, ssh Files to share could be over 1 GB. I found the question below. WebDav does not sound user friendly enough: http://serverfault.com/questions/86878/recommendations-for-a-secure-and-simple-dropbox-system I've done a lot of searching, but I can't get the search terms right. There are too many services that provide this, but I want something we can install on our own server. A last resort would be to roll my own. Any ideas appreciated. Glen EDIT Sorry Tom and Jeff but Glen specifically says that he's looking for a 'product' so given that I specialise in this field thought that my expertise in this area may have been of use to him. I don't see how him writing services is going to be easy for him to maintain going forward (large IT admin overhead) or simple for his users and the general public to work with.

    Read the article

  • Unconvert Text File from Binary Format

    - by Hammer Bro.
    I've got a rather large CSV file (~700MB) which I know to consist of lines of 27-character alpha-numeric hashes; no commas or anything fancy. Somehow, during its migration from Windows to Linux (via winSCP and then a few regular SCPs), it has converted into some kind of binary format I am unfamiliar with. If I open the file in vi, everything appears fine, and it says [converted] at the bottom, although I know it's not a line endings issue (and dos2unix doesn't help). If I 'head' the file, it looks proper except for a "ÿþ" at the beginning of the first line. If I open up the file in nano, however, I see the "ÿþ" at the start and then "^@" before every character (even newlines and EoF). If I try to re-save or copy the file (say via: head file.csv short.txt), this special encoding is preserved. I copied the first ten lines out of vi (which displays it properly) into my Windows clipboard via my SSH client, then pasted it into a new text file, test.txt. This file is visually identical when opened in vi (and similar through 'head', minus the "ÿþ"), although it's roughly half of the filesize. Additionally, file test.txt test.txt: ASCII text file short.txt short.txt: I have no idea what format this once-text file got converted to (it's notoriously hard to search the internet for symbols), but surely there must be some way to convert it back. Any ideas?

    Read the article

  • Missing taskbar buttons on Taskbar in Windows XP

    - by Nargis
    My Windows XP only show Taskbar without taskbar buttons. I can change Task Windows using Alt+Tab Keys. In task Manager, there is show All open windows and task. But Missing taskbar buttons on taskbar. I've already repair windows by "second R". But still missing taskbar buttons. If I reinstall windows, then I will lost all software program install on that windows XP. I don't want to reinstall all software program after windows installation. So what shall I do, Please share your experience. I would like to know how to show taskbar bottons on taskbar without reinstall. Other toolbars on taskbar are OK. Only missing task windows-buttons Taskbar ??? taskbar buttons ??????????????? Alt+Tab ??? ??????????? Task Manager ??? ???????? Taskbar ??? ??????? windows ????????????????? ??????? not repair windows and reinstall ?????????? ????? software ??????? ???? install ???? . . . ??????????? ???????????????

    Read the article

< Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >