Search Results

Search found 2968 results on 119 pages for 'cable modem'.

Page 31/119 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• crash when using wireless network

  - by Erik

  ubuntu 12.04 32 bit When I start up my system almost instantly freezes, I found that the problem lays with my wireless network, because the crash is always t the same time as the message that tells me I am connected to a network when I start up connected to a cable everything works fine, I can even see that I am connected to our wireless network, until I unplug the ethernet cable, then it all freezes again the same happened when I boot from a live cd (from usb) The problem only occurs on my netbook, my laptop doesn't give any problems. I don't know if anyone else has had similar problems, or if anyone knows a solution... Thanks in advance! greetings Erik EDIT (21/3/2012): it seems there is some external factor involved, I'm using my netbook for about 50 minutes now while connected to the wireless network, and still it didn't crash strange enough, before these 50 minutes I had to put it down by holding the power button, because I decided to try it again, that time it did crash... before (while connected with an ethernet cable) I've been trying to get my Bluetooth working, that didn't succeed entirely, but I guess that might be a factor in the question why it doesn't crash at the moment now I rebooted, connected, and no crash... if it crashes again, I'll update this post again. in the meantime, if anyone has an idea on what could be a factor, and on how to create a crash using that factor, feel free to ask!

  Read the article

• Black screen on login, can get thru decrypt disk and access command line but no GUI

  - by t3lf3c

  Running 12.04 64 bit fresh alternative install, with disk crypto on a new Lenovo laptop Install didn't connect and install modules, even though I had the network cable plugged in and don't have any whacky proxy settings. I had to manually install ubunut-desktop and define sources after initial installation, so this seemed a bit weird (ISO matched MD5 sum though) I unplug the network cable, otherwise I get a black screen that I can do nothing with. So I turn laptop on, I have disk encryption, I type in the password at the Ubuntu decryption GUI then get "set up successfully" message "Waiting for network configuration ..." then "Waiting for up to 60 more seconds for network configuration" At this stage (a) If I wait for it then I get a black screen that I can do nothing with. (b) If I interrupt the process by pressing escape, then I break through to the command line. From the command line, I can go ahead and login, then plug my network cable in to do apt-get commands. As a precaution I do some house keeping which takes a few mins to run: sudo apt-get update sudo apt-get upgrade Running startx to get to the GUI gives: Fatal server errror: no screens found The .Xauthority file is being created in my home directory but it's empty. I review my order and note the system graphics: Intel HD Graphics (WWAN or mSATA capable) So it's weird that I can't get to the Gnome. It looks like drivers aren't working. Is there a way of getting Intel drivers from the command line? Or do you have any other suggestions on what to try next?

  Read the article

• 12.04 wired network doesn't work RTL8111/8168B

  - by laket

  its a fresh 12.04 install 64bits. wifi works fine, wired stays off with cable connected and network-manager shows as if cable is disconnected. Turning off networking lights up my network-cards leds, turning networking on shuts off the leds and no communication is possible. I already tried, turning off the network-manager (sudo service network-manager stop) and setting up my eth0 manually, as soon as I switch off the network-manager my leds light up, but after setting up manually eth0 (sudo ifconfig eth0 10.2.10.114 netmask 255.255.0.0 up) the leds turn off again. I am still dual booting with 10.04 where I have no issues at all, leaving the cable connected all time to my notebook and a switch. Here is some hardware info: lshw: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 03 serial: c8:0a:a9:d7:05:97 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168d-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff memory:f0010000-f001ffff lspci: 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ifconfig eth0: eth0 Link encap:Ethernet HWaddr c8:0a:a9:d7:05:97 inet addr:10.2.10.114 Bcast:10.2.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 Base address:0xc000 cat /etc/network/interfaces: (already tried here with and w/o eth0) auto lo eth0 iface lo inet loopback cat /etc/NetworkManager/NetworkManager.conf [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false Any help is welcome ;) Laket

  Read the article

• Boot failure randomly. Can someone help?

  - by desgua

  I often get stuck at the boot on battery. I can suspend and hibernate without any trouble (even on battery). If I plug the energy cable everything goes right most of the time (edited June 13). Adding "acpi=off" doesn't solve the issue. Disabling power save from LAN at BIOS doesn't solve this too. Memory test seems to be ok: I can even compile a kernel without a problem: Has someone a tip for this? (I have the same questions marks in my mind as the image shows if not more :-/ ) obs.: this is an upgraded installation from Natty alpha. edited I (May 22): I've installed a brand new final 11.04 and got the bug again. edited II (June 13): I thought it was solved but it is not. After spending eight days off, the same problem happened even with the power cable connected. I had to reboot about 6 times until success. edited III (June 14): I can boot (even with battery) if I disconnect the cable and take off the battery for a few seconds. This lead me to conclude that maybe something is kept into memory of some hardware. Maybe or maybe not related but I also have touchpad issues (jumps) with this machine. edited IV (June 25): I opened gconf-editor and went to apps gnome-power-manager and disabled everything possibly related to suspend or hibernate. No help. Also I grabbed a Fedora live usb pendrive and got the same problem: So I think it is a hardware problem related issue.

  Read the article

• More information about worldwide nodes how to get?

  - by Aubergine

  The context: Six hosts across worldwide were traced over week from UK. Ten thousands of lines to be parsed and analysed. And then I try to find any clue of geographical information and path - from where it jumps where. Then after Austria or Germany(each time different) I have mysterious 62.208.72.6 which in GEO LOC gives me Falklands Islands (which is where my target host is by the way, but before target host I still have 5 other nodes) Then I do whois for this 62.208.72.6 route: 62.208.0.0/16 descr: DE-ECRC-62-208-0-0 origin: AS1273 mnt-by: CW-EUROPE-GSOC source: RIPE # Filtered Why it says Europe now? How to understand this enigma code? I want to confirm more or less whether this is in europe or in falkland islands? But it can't be in FK yet as after next two hosts I get New York? Could you also tell me what does this CW-EUROPE-GSOC abbreviation means. (To preserve your sanity better not google, unless you already know it :-D) And the actual whois for the destination/target host, which completely destroys my head: route: 195.248.193.0/24 descr: HORIZON descr: Cable and Wireless Falkland Islands descr: Via Cable and Wireless Communications UK origin: AS5551 mnt-by: AS5551-MNT source: RIPE # Filtered How is it Via Cable and Wireless Communications UK if two nodes before I was in New York? Thank you guys,

  Read the article

• Cat 6 Only 100mbit speed

  - by Stu2000

  I tried two different cat6 cables directly connected between my two ubuntu machines. This one I ordered online: http://www.amazon.co.uk/gp/product/B002SQPDXS/ref=wms_ohs_product only achieves 100mbit speeds, but does appear to be supporting cross-talk (direct pc to pc), the other cat 6 cable, worked perfectly and gets the full 1gigabit speed. Both tests were performed using ftp and checking the network monitor with direct pc to pc connection. Did the product from amazon lie to me or do I need to manually set a setting somewhere in ubuntu for some cables? I had thought 10 quid for 20m of gigabit ethernet cable was a bit cheap, you get what you pay for... Regards, Stu Update: It seems that after rebooting, the device is set to 1000mbit sec when looking it up with sudo ethtool eth0 However after a while, this will drop down to just 100, after which to reset it to 1000 again, I have to reboot, and simply unpugging and re-plugging in the cable doesn't do it. I tried setting this in networking config file as suggested here: auto eth0 iface eth0 inet static pre-up /usr/sbin/ethtool -s eth0 speed 1000 duplex full but that resulted in my networking failing to start. Is there a problem with my 'auto-negotiation' or something? Can I manually override a setting to 1000mbit?

  Read the article

• Horse Drawn Fiber Optics Bring Broadband to Remote Areas

  - by Jason Fitzpatrick

  When you think of fiber optics and high speed internet the last thing you likely think of is… horses. Yet horses have been put to use rolling out fiber optics to remote rural locations. In Vermont a Belgium draft horse named Fred, seen in the photo above being tended by his handler Claude, is a distinctly 19th century solution to a 21st century problem; how to run fiber optic cable through remote areas where trucks cannot easily pass. The man and animal are indispensable to cable and phone-service provider FairPoint Communications because they easily can access hard-to-reach job sites along country roads, which bulky utility trucks often cannot. “It just saves so much work – it would take probably 15 guys to do what Fred and Claude can do,” said Paul Clancy, foreman of a line crew from FairPoint. “They can pull 5,000 feet of cable with no sweat.” You can read more about the use of draft horses to draw lines and the roll out of broadband to rural Vermont at the link below. Vermont Uses Draft Horse to Lay Cables for Internet Access [Reuters] How To Encrypt Your Cloud-Based Drive with BoxcryptorHTG Explains: Photography with Film-Based CamerasHow to Clean Your Dirty Smartphone (Without Breaking Something)

  Read the article

• Dell M4600 with nVidia Quadro 2000M hangs on boot when external monitor is connected

  - by vladeta

  I have a problem with my fresh installed Ubuntu 12.04 LTS on my Dell M4600: nVidia quadro 2000M i7-2860 16GB ram 128GB SSD Dell/Samsung 750GB HDD IPS RGB laptop display When it is connected via DP++ to the external Dell U2311H monitor, it hangs on boot or when wakening from suspend. If I detach the DP cable it boots normally. I have tried all combinations that I have found, as adding to grub: "no splash", "boot=pci", "acpi=off", etc... I have also changed in nVidia X settings that external monitor is the primary one and also tried to delete monitor.xml file. There is no change it hangs each time after grub. It starts to load daemons then both screens are blank and then completely hangs with beep sound. What I discovered is if I detach the cable and wait for about 2 sec after grub starts booting and then physically connect DP cable while the Ubuntu is still booting everything works normally and I have a picture on my external screen while the laptop screen is off, just as I wanted. Do you maybe know how to solve this issue? Thank You.

  Read the article

• ubuntu 12.04 LTS hangs on boot when external monitor is connected

  - by vladeta

  I have a problem with my fresh installed Ubuntu 12.04 LTS on my Dell M4600: nVidia quadro 2000M i7-2860 16GB ram 128GB SSD Dell/Samsung 750GB HDD IPS RGB laptop display When it is connected via DP++ to the external Dell U2311H monitor, it hangs on boot or when wakening from suspend. If I detach the DP cable it boots normally. I have tried all combinations that I have found, as adding to grub: "no splash", "boot=pci", "acpi=off", etc... I have also changed in nVidia X settings that external monitor is the primary one and also tried to delete monitor.xml file. There is no change it hangs each time after grub. It starts to load daemons then both screens are blank and then completely hangs with beep sound. What I discovered is if I detach the cable and wait for about 2 sec after grub starts booting and then physically connect DP cable while the Ubuntu is still booting everything works normally and I have a picture on my external screen while the laptop screen is off, just as I wanted. Do you maybe know how to solve this issue? Thank You.

  Read the article

• How to dual boot Ubuntu 12.10 and Windows XP sp3 on Dell Dimension 8250 desktop using 2 hard drives

  - by user106055

  I'd like instructions to dual boot Ubuntu 12.10 and Windows XP (sp3) on my desktop Dell Dimension 8250 (this is old and has 1.5 GB RAM which is maximum). I will be using 2 hard drives. Windows XP is already on a 120 GB drive and and Ubuntu 12.10 will go on a separate 80 GB hard drive. Both drives are IDE using a 80 conductor cable where the 40 pin blue connector connects to the motherboard. The middle connector is gray and is "normally" used for slave (device 1) and the black connector at the very end of the cable is meant for the master drive (device 0) or a single drive if only one is used. First, I do not wish the XP drive to have its boot modified by Ubuntu in any way. It should remain untouched...virgin. Let me know where the XP drive and the Ubuntu drive should be connected based upon the cable I've mentioned above, as well as jumper settings for both during the whole process. I'm just guessing, but should I remove the XP drive and put the empty Ubuntu drive in its place and install Ubuntu? By the way, I already have made the DVD ISO disk. For your information, the BIOS for this machine is version A03. When I tap F12 to get to the boot menu, I have the following choices: Normal (this will take me to a black screen with white type giving me the choice to boot to XP or to my external USB backup recovery drive) Diskette Drive Hard-Disk Drive c: IDE CD-ROM Drive (Note that if the CD Drive is empty, it will then go to the DVD drive) System Setup IDE Drive Diagnostics Boot to Utility Partition (This is Dell's various testing utilities) Thank you in advance for your help. Guy

  Read the article

• How can I fix "[Error 6] The handle is invalid." with PySerial

  - by alnorth29

  I'm trying to connect to my phone from my Windows 7 PC using PySerial with the following code: import wmi import serial c = wmi.WMI() modem = c.query("SELECT * FROM Win32_POTSModem").pop() ser = serial.Serial(modem.AttachedTo, modem.MaxBaudRateToSerialPort) try: ser.write('at \r\n') print ser.readline() finally: ser.close() But get the following error on the write call: Traceback (most recent call last): File "D:\Alasdair\Documents\Python Scripts\Phone Interface\test.py", line 14, in <module> ser.write('at \r\n') File "C:\Python26\Lib\site-packages\serial\serialwin32.py", line 255, in write raise SerialException("WriteFile failed (%s)" % ctypes.WinError()) SerialException: WriteFile failed ([Error 6] The handle is invalid.) I've tried connecting with TeraTerm and that works fine, so it's not a problem with the connection to the phone itself. I've been searching around for ages trying to find a solution but haven't come up with anything that works. Any ideas?

  Read the article

• Android delivering different Cell IDs (Neighboring Cell Info)

  - by Curro

  Hello. Using an Android Dev Phone 2, I'm using the GsmCellLocation.getCid() method to get the Cell ID on my network. When I run the command and get all the CellIDs for the NeighboringCellInfo I get this values: 597195726 597185722 597195718 597110191 597101100 597175726 I'm running this using the SDK 1.6. The problem is that when I run the Engineering Mode on a GSM modem that I have, running a command to obtain the Neighboring Cell IDs, I get this values: 34253 0 34223 34262 34181 0 What is the difference here? In what format is Android delivering the Cell IDs? I tried doing a "cell.getCid() & 0xffff" but now I'm getting the values: 21690 31686 37068 11695 11694 31694 Which are still different from the one that the GSM Modem is delivering with the Engineering Mode. Obviously I tried this on at the same time, same location. I'm trying to get the same Cell IDs that the external GSM modem I using is delivering Please provide any help Thanks in advance!

  Read the article

• Need help diagnosing network performance issues

  - by tokes

  I am currently working in a developing country as a system analyst for a government department. My area of expertise is software projects, but I've come across a few issues with the network setup in my office. (Unfortunately, being a developing country, there's not a lot of professional help available for this sort of thing.) Most recently, I am trying to diagnose a problem with slowness on the network. Our office is connected to the internet via an ADSL wireless modem/router (called Router). The modem is connected via ethernet to a switch (called Switch). The modem also acts as a wireless access point (called Wireless1), though because it is in a room at the end of the floor, it's range is limited. There are ethernet ports installed around the office. The cables of these all lead back to the same switch. In closer vicinity to the bulk of the client computers, there is another wireless router that acts as an access point for those clients (called Wireless2). That router is connected via ethernet to a wall port, and therefore to Switch. There is also a Windows server which acts as a DNS server (called DNSBox) which is located in the same room and is connected directly to Switch. ---Internet----------| Router/Wireless1 192.168.10.1 ---------------| |----|=========| DNSBox | |-------------------- 192.168.10.4 --------------------| Switch |---Other clients---- | |-------------------- |----|=========| Wireless2 ------------------| 192.168.10.198 One final thing to mention about the network setup. All clients are configured with manual IP addresses. Their router/gateway is set to the IP address of Router, and their DNS server is set to the IP address of DNSBox (with a secondary IP set to an external IP - that of our ISP's DNS server). Here are the symptoms we are experiencing: Clients connected to Wireless2 AP experience slow and unstable connections to the internet. (Slow here is defined as speeds of ~1KB/s, though ping response times seem to be as normal.) Clients connected via ethernet to Switch also experience the same slowness. Clients connected to Wireless1 AP (i.e. connecting via wireless directly to the ADSL modem) experience normal connections to the internet. Clients connected via ethernet to Router (i.e. connecting via ethernet directly to the ADSL modem) also experience normal connections to the internet. I also tried to gauge the connection performance between two machines on the network via ethernet: A file transfer between two clients who were both directly connected to Switch was the fastest; A file transfer between one client directly connected to Switch, and one client directly connected to Router (which is directly connected to Switch) performed much slower; A file transfer between two clients directly connected to Router also performed slowly. Things I have attempted to diagnose the problem: Restarted Switch -- no change. We tried unplugging ethernet jacks from Switch 4 at a time and testing the internet connection. The thought here was that perhaps a client on the network has contracted a virus, and is possibly spamming the network with traffic? (Not very technical, I know.) Unfortunately we couldn't get any significant increases in performance using this method. There were a couple of times when it seemed to be better, but then the connection speed quickly dropped back to slow/dead pace. I didn't want to unplug all jacks from Switch because I was concerned that users might be affected or that I would re-plug in the jacks incorrectly (should I even be worried about that? a port is a port on a switch, right?) I tried swapping the ethernet cable used to connect Router to Switch -- no change in performance. I tried swapping the port used on Switch for Router -- no change in performance. Anyone got any ideas on what this could be? Should I be mentioning specific brand names/models of the hardware used? Virii outbreaks are common in this country/office -- what could I be doing to figure out if a virus is at fault? If it is a virus, it doesn't seem to be generating a lot of traffic to/from the internet, because a) I can still get a good speed if I am directly connected to Router / Wireless1 and b) our ISP data usage has not risen suspiciously. Thanks for your help! Update #1 Here are the specs of some of the hardware: Switch is an Edimax ES3132RL 32-Port 10/100 Rackmount Switch Router is a D-Link DSL-G604T Update #2 I just tried unplugging everything except a laptop and Router from Switch. Speeds are still slow. I guess that means that Router / Switch are not being flooded? It seems more and more likely that the cause is something to do with the interaction between Router and Switch. However, I still can't find any useful resources on setting the LAN speed for either (and I'm not well-versed in these advanced networking configurations).

  Read the article

• Installing Ubuntu 12.04 on NUC intel i3 DC3217IYE

  - by Kieron

  System: NUC i3, 2 hdmi ports, ethernet, no wireless. UEFI boot 2x2gb ram 30gb mSATA internal drive Ubuntu 64bit 12.04.03 Hello i am having much trouble loading an OS on my NUC. I started out attempting another OS with various loaders (beast/hack) without much success,(various panics on boot or endless reboot loops, or graphics failures) after many tries i decided to attempt Ubuntu. Many years ago i loaded Ubuntu on an e-machine without an issue so i figured it would go smoothly, nothing could be further from the truth. The Live USB stick loads, but when i am installing the OS it always fails to load grub 2. Obviously it wont boot from SSD without grub2. I searched and found that Boot-repair should fix it...so i created a live usb with boot repair...it refuses to repair the grub because the install never finished and the needed partions are not fully created and flagged. It also demands an internet connection which i am unable to provide. I then ran gparted in an attempt to create the needed partitions manually, then re-ran boot repair turning off the "check internet" option. and disabling the re-install grub hoping it would create the missing directories and or fix the flags. it appeared to run successfully but upon return to the Ubuntu live USB it still fails at the grub2 install. also gparted doesnt have the same choices that Ubuntu install has when creating partitions, causing it to not recognize that i already had a root, or an EFI directory or it sometimes couldnt tell what the format of the partition was...all very annoying the reason i cant connect to internet (and cant upload the error logs) is the nuc only has Ethernet and the location i have to set up is too far away from modem. i can not move the monitor closer to modem as it is a 50inch LCD. I just want to do a basic install with one user acct and remote desktop (vnc) turned on so i can move the NUC to the modem connect via ethernet and then finish setting it up via Remote desktop/VNC chicken from my mac. While i await any assistance you maybe able to provide i am going to attempt to switch to the 32bit version and legacy boot to see if that can load grub. thnx again to anyone that can come up with a possible solution. i would love to hit "erase and install ubuntu" if anyone can figure out what is stopping that simple answer from working. Also disks (CD/DVD) are not an option as neither my Mac mini or my NUC have optical drives, and i have no desire to buy one for one task

  Read the article

• BSNL Routers: Default Username and Password To Access Admin Interface

  - by Gopinath

  Problem You have BSNL broadband set up at home and everything is working fine. But one fine day you something went wrong or you would like to change the properties of your BSNL modem by logging in to the admin user interface of your modem. What is the default username and password to login to BSNL Router user interface? Solution Here are the default username, password to access your BSNL router admin interface URL: http://192.168.1.1/ Username: admin Password: admin Note: The above username and password are the default ones that works with all the BSNL routers until unless someone has changed them. This article titled,BSNL Routers: Default Username and Password To Access Admin Interface, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Can't find ALL wireless networks, just my neighbours

  - by motoringeek

  Been playing with live discs since 10.10 but now have gone ahead and dual booted. I have a Acer 5742z with a Nplify 802.11b/g/n wireless connection. The install went well and drivers seem to be working. BUT, although wireless detects some local networks it doesn't find mine. I have WPA-PSK security on my modem, could this be the problem?? I don't want to change my modem settings as all my other WIFI devices are contected to it. So I need help in finding my home network. A step by step guide would be useful. I am using Windows 7 now to write this but would love it if I could use Ubuntu online. I only can when I connect an Ethernet cable. Thanks in advance.

  Read the article

• How did Ubuntu know my WPA Key?

  - by nebukadnezzar

  I've recently moved my /home to another computer (keeping all configuration files), with a fresh installation of Ubuntu 10.10. After Installation I've installed wicd and ndiswrapper, to get my Internet Connection up and running. However, after changing /etc/network/interfaces from auto lo iface lo inet loopback To auto wlan0 iface wlan0 inet dhcp and running sudo /etc/init.d/networking restart to get wlan0 set up, wicd just suddenly connected... to my modem. Without supplying any information about the modem whatsoever. Of course wicd creates a local directory at ~/.wicd/, but that directory is empty, and the temporary global configuration at /var/lib/wicd/configurations/ didn't exist due to fresh installation of ubuntu. So what's the deal? Where did wicd get the ESSID and the WPA Key? There hasn't been any activity in this question, but it's still open (and even worth some rep)!

  Read the article

• Open port in gufw is closed, no incoming connection on deluge

  - by user66987

  I have a problem configuring gufw. I open ports on it, but when i test in deluge it shows as closed. Any help on setting up the firewall would be greatly appreciated. This is the output I get on the firewall in terminal: Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN 1346/dnsmasq tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 970/cupsd tcp 0 0 0.0.0.0:55521 0.0.0.0:* LISTEN 17362/python tcp6 0 0 ::1:631 :::* LISTEN 970/cupsd tcp6 0 0 :::55521 :::* LISTEN 17362/python udp 0 0 10.0.0.125:1900 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:1900 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:1900 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:53162 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:53 0.0.0.0:* 1346/dnsmasq udp 0 0 0.0.0.0:68 0.0.0.0:* 1312/dhclient udp 0 0 10.0.0.125:36948 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:37240 0.0.0.0:* 17362/python udp 0 0 10.0.0.125:6771 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:6771 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:6771 0.0.0.0:* 17362/python udp 0 0 10.0.0.125:50034 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:58340 0.0.0.0:* 982/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 982/avahi-daemon: r udp 0 0 0.0.0.0:56947 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:57059 0.0.0.0:* 17362/python udp6 0 0 :::49793 :::* 982/avahi-daemon: r udp6 0 0 :::5353 :::* 982/avahi-daemon: r kenneth@kenneth-K53U:~$ sudo ufw status Status: aktive Til Handling Fra --- -------- --- 6881:6891/tcp ALLOW Anywhere 6881:6891/udp ALLOW Anywhere 55521/tcp ALLOW Anywhere 6881:6891/tcp ALLOW Anywhere (v6) 6881:6891/udp ALLOW Anywhere (v6) 55521/tcp ALLOW Anywhere (v6) I also want to be able to use the firewall with linuxdc, so I need other ports open as well. This is connected to the firewall. Because when I turn off the firewall, the port is open. So this is not a problem with my modem. Do I need the firewall? The broadband modem has a hardware firewall. Update: Forgot to add. When my firewall is inactive, it closes ports after a time. So when I use linuxdc, I have to flush iptabels and activating it again. Is this supposed to do this when the firewall is deactivated? Update again: All my ports are closed now, flushing the iptable does not work anymore. I have uninstalled gufw, but still all my ports are closed. And to say it again, this has nothing to do with my broadband modem since it worked when I used windows 7. I need help to open the ports.

  Read the article

• Manually activate Network Manager Applet

  - by diosney

  The issue I've is that when I connect via modem through gnome-ppp the Network Manager Applet don't detect a connection and don't let me use the configured VPNs via its interface. How Can I manually activate the Network Manager Applet? What I need is to enable the Network Manager apple in order to use the "VPN Connection" section of the GUI. When I don't have an ethernet cable connected and I connect through a modem the Network Manager applet doesn't enables itself, it is like if don't recognizes the ppp0 interface. My question is: there is a way to force the Network Manager GUI indicator to make it "alive"/"up"/"enabled" in order to use the "VPN Connections"section? Thanks in advance.

  Read the article

• iptables allow dyndns domain name and auto update rules

  - by user3215

  I have registered with dyndns domain for my dynamically changing public ip address to use with iptable rules. On a server I've allowed some ports for this domain in the iptables configuration like the below entries: -A INPUT -s mycompany.dyndns.com -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -s mycompany.dyndns.com -p tcp -m tcp --dport 3306 -j ACCEPT -A INPUT -s mycompany.dyndns.com -p tcp -m tcp --dport 21 -j ACCEPT But when ever my modem restarts, I couldn't connect to these allowed ports as public ip changes with modem restart and are not updated in the iptables on the server. Is there any option to automatically update iptable rules on server.

  Read the article

• Simpler Times

  - by Simon Moon

  Does anyone else out there long for the simpler days where you needed to move a jumper in the jumper block to set your modem card to use IRQ7 so it would not conflict with the interrupts used by other boards in your PC and your modem card came with a 78 page manual telling you everything you would need to know to write your own driver for the board including a full schematic along with the board layout showing every chip, capacitor, and resistor?  Ahhhhh, the simplicity!I am wrestling with UserPnp issues for a USB software licensing dongle that is needed by some third party software in one of our production applications. Of course, every machine in production is virtual, so it could be anything in the chain of the software application library to the device driver running on the VM to the configuration of the simulated USB port to the implementation of the USB connection and transport in the virtual host to the physical electrical connections in the USB port on the hypervisor.If only there were the virtual analog to a set of needle-nose pliers to move a virtual jumper.Come to think of it, I always used to drop those damn things such that they would land in an irretrievable position under the motherboard anyway.

  Read the article

• How to set up router with DSL?

  - by NightwishFan

  I have a Verizon DSL connection. I am new to being the one who has to maintain the net. We have the Verizon modem and plugged into it is a belkin router. I did not alter the configuration on either of the devices. We get a net connection, though I have issues joining any form of online game. Some refuse to connect, others are slow. I have read that perhaps I need to use the modem in "bridge mode" to the wireless router? Would that fix my issues? Or do I just have to open ports or something similar. I really have no clue what could be the problem. Could someone advice me how to get this working with Ubuntu?

  Read the article

• NetworkManager doesn't detect my broadband device

  - by Joril

  I have a Huawei K3765 (USB ID 12D1:1520) and I'm trying to use it with Ubuntu 10.04 Lucid. I have usb-modeswitch installed, so when I plug the device I can see that it gets switched from storage-mode to modem-mode. My problem is that when I try to create a broadband mobile connection for it, NetworkManager doesn't detect the modem... I tried this on two different laptops. /var/log/daemon.log doesn't show anything of interest, AFAIKT... What could I try?

  Read the article

• How to establish VPN Connection using Vodafone K3773 HSPA USB Stick?

  - by user1889139

  I am using Ubuntu 12.04 Desktop. I am trying to establish VPN PPTP connection to Ubuntu 12.04 Server. VPN connection available when PC is connected to LAN - ADSL modem - Internet - VPN Server. No VPN connection available when using 3G modem Vodafone K3773 HSPA USB Stick - Internet - VPN Server. Internet is connected. VPN is not. How to establish the VPN Connection? Server side log: GRE: Bad checksum from pppd.

  Read the article

• Is it possible to configure Ubuntu as a software firewall?

  - by user3215

  I have some systems running on Ubuntu in the private IP range 192.168.2.0-255 . These systems are connected to a switch and the switch is connected to the ISP's modem. Neither the switch nor the modem support firewall options. I don't have any firewall device and I'm not willing to individually configure firewalls on all the systems (via gui/iptables). Is it possible to make an Ubuntu system into something like a software firewall, so that all the traffic/packets sent to or from the WAN(internet) would be allowed/denied based on its firewall rules?

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >