Search Results

Search found 4316 results on 173 pages for 'disabled'.

Page 31/173 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

  • Remote Desktop connection repeatedly aborting

    - by DerKlaus
    I connect to my workplace computer using Remote Desktop. After 1-2 minutes the application freezes to tell me after one more minute that the connection was aborted. It then reconnects. Everything works again for 1-2 minutes. Then the process repeats. Probably Forever. My coworkers do not experience such problems when connecting to the workplace. My workplace computer: Windows 7 32bit My home computer: Windows 7 64bit connected to the internet via WLAN-router with integrated ADSL modem (Linksys WAG200G) Things I already tried to fix the problem: disabled the Windows firewall disabled the other firewall reduced the MTU upgraded the firmware on the router configured port-forwarding to forward all packets to my home computer The problem remains unchanged. What could be the cause of the connection aborts? What else can I try to fix the connection? Thanks in advance.

    Read the article

  • Why is my firewall preventing me from accessing some websites

    - by nosx
    I have an old Belkin router and when I enable the firewall I cannot access certain websites. For example: http://www.avisynth.org With Firewall Enabled: Main page loads and begins to do a meta refresh which never finishes. With Firewall Disabled: Main page loads and the meta refresh completes as normal and I am taken to the wiki page. I have not setup any rules in my firewall that would prevent this site from loading, yet it refuses to load unless I have the firewall disabled completely. My router has a hidden page with advanced settings on it for the firewall which I was able to acccess and take a screenshot of, but I did not want to mess with these values unless I absolutely have to do so: What might be causing this problem and how would I go about fixing it?

    Read the article

  • How do I enable SELinux when booting a ramdisk from a CD/DVD?

    - by JeffG
    I have a bootable DVD which boots the same Kernel as the Hard Drive (which uses SELinux). I have copied /etc/selinux and all kernel modules to my ramdisk, and have tried various combinations of selinux=1 and selinux 1 with enforcing 1 and enforcing 0. as Kernel boot parameters. All files contained in the checkpolicy, libselinux, policycoreutils, selinux-policy and selinux-policy-targeted rpms have also been copied into the ramdisk tree. After the system boots from the ramdisk, I check dmesg: % dmesg | grep -i selinux Kernel command line: initrd=idrd.img ramdisk_size=110476 selinux=1 SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability SElinux: Registering netfilter hooks But SELinux isn't running: % /usr/sbin/getenforce Disabled % /usr/sbin/setenforce 1 /usr/sbin/setenforce: SELinux is disabled Neither /var/log/messages nor /proc/kmsg hold clues.

    Read the article

  • What are the possible reasons visual studio 2008 team system would not connect to a TFS2008 server

    - by Nikola Stjelja
    I have Visual Studio 2008 Team System installed on my work machine. I use it to work for an offisite clients Team Foundation Server 2008. Yesterday it stopped working. E.G. I couldn't connect to TFS. On my machine I have updates disabled, I have the firewall disabled and have a proper working connection to my clients server. The client didn't change anything on its machine. What are the possible reasons the visual studio couldn't find the TFS server. Note: Other members of my team can connect without problems, and I've checked we have the same configurations).

    Read the article

  • Windows 7 System process reading/writing like crazy

    - by Mats Ekberg
    I have a problem that my windows 7 computer sometimes starts accessing the disk like crazy for maybe 10 minutes at a time. The process in question is the "system" process. I have disabled superfetch and hibernation on my computer, if that makes any difference. I disabled those to see if they were the cause of the problems, but no change. I have 6 GB of RAM and only the web browser was started when I took the screenshot, so I don't think it was thrashing due to page faults. Any ideas on how to find the cause of this?

    Read the article

  • jQuery programmatically removing validation highlighting

    - by Sam Carleton
    The form has two check boxes (cbDeclined & cbIsOOfFac), two text fields and a drop down (txtHeight, txtWeight, ddlDevice). If either check box is checked, then the other controls are disabled and the rules for the other do no apply. Here are the current rules: $('form').validate({ highlight: function (element, errorClass) { $(element).addClass("invalidElem"); }, unhighlight: function (element, errorClass) { $(element).removeClass("invalidElem"); }, errorPlacement: function (error, element) { var parent = element.parent(); parent.append(error); }, errorElement: "div", errorClass: "errorMsg" }); function HeightWeightCtrlsEnabled() { return !cbDeclined.is(':checked') && !cbIsOOfFac.is(':checked'); } txtHeight.rules("add", { required: function (element) { return HeightWeightCtrlsEnabled(); }, maxlength: 3, min: 1, digits: true }); txtWeight.rules("add", { required: function (element) { return HeightWeightCtrlsEnabled(); }, maxlength: 4, min: 1, digits: true }); ddlDevice.rules("add", { required: function (element) { return HeightWeightCtrlsEnabled(); } }); function UpdateTextBoxes() { var disableCtrls = !HeightWeightCtrlsEnabled(); txtHeight.prop('disabled', disableCtrls); txtWeight.prop('disabled', disableCtrls); ddlDevice.prop('disabled', disableCtrls); if (disableCtrls) { txtHeight.val(''); txtWeight.val(''); ddlDevice.val(''); } } cbDeclined.click(function () { if (cbDeclined.is(':checked')) cbIsOOfFac.attr('checked', false); UpdateTextBoxes(); }); cbIsOOfFac.click(function () { if (cbIsOOfFac.is(':checked')) cbDeclined.attr('checked', false); UpdateTextBoxes(); }); The problem comes in when: The user enters something into txtWeight, clicks the submit to get both ddlDevice & txtHeight to highlight because they are required, then... The user clicks on either cbDeclined & cbIsOOfFac. The highlight is NOT going away. I am trying to figure out how to get the highlighting around the height and drop down to go away. I tried to create a fully working jsFiddler, but I cannot get anything to work, though everything looks correct. here is the link (I cannot post links, so I expanded it a bit) jsfiddle dot net/scarleton/9hDZQ/12/ If you remove the last /12/, you will see my first version that is a cut/paste from the real thing. Per a suggestion I tried adding $('form').valid(); a number of places. When I added it to the end of the UpdateTextBoxes() function, they started out highlighted, not what I want. When I added it after the click() event of either of the radio button, the text would go away, but the actual controls stayed highlighted. It looks like the function on the required property of the rule is not fully working, maybe. What is really interesting is this: When I enter a height, click , then weight and device are highlighted and have the error message under them. When I click on one of the radio buttons, the text goes away, but the highlight does not. But... The height is NOT highlighted, it stays normal.

    Read the article

  • How do I enable SELinux when booting from a CD/DVD?

    - by JeffG
    I have a bootable DVD which boots the same Kernel as the Hard Drive (which uses SELinux). I have copied /etc/selinux and all the kernel modules to my ramdisk, and have tried both selinux=1 and selinux 1 as Kernel boot parameters. After the system boots, I check dmesg: % dmesg | grep -i selinux Kernel command line: initrd=idrd.img ramdisk_size=110476 selinux=1 SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability SElinux: Registering netfilter hooks But SELinux isn't running: % /usr/sbin/getenforce Disabled % /usr/sbin/setenforce 1 /usr/sbin/setenforce: SELinux is disabled /var/log/messages does not hold any clues. /proc/kmsg also has nothing

    Read the article

  • Disable "Windows Firewall with Advanced Security" for all profiles(Domain,Public,Standard) in local GP using script help! Windows 7 Clients

    - by JoBo
    We need Windows7 with windows firewall to be turned off , so the GOLD image has windows firewall turned off for all profiles(Domain,Public,Standard) and Windows Service disabled No the same GOLD image deployed with MDT (Apply local GPO) has enabled Windows Firewall under "Windows Firewall with Advanced Security" as part of task sequence Now we need to remove it. "These machines are now on Domain where in we have no rights/control on the domain level GPO", we have local admi rights on these machines We have a requirement do set the "Windows Firewall with Advanced Security" to "NOT Configured" or "OFF "on these machines In gpedit.msc if we manually go to "Windows Firewall with Advanced Security" after enabling Windows Firewall Services then can Clear the settings Do do the same manually on all machines is extra effort Changing values in registry will get reverted on machine restart as its getting applied from local GPO Also using GPMC can connect to remote computer and can manually or using wfw file we can make it not configured but we are looking for a script or a less effort method to accomplish this Please suggest NB: CIA has already reported similar issue//How do I turn off Windows 7 Firewall via script or through automation?// , but doing netsh advfirewall set allprofiles state off on already deployed machines did not make change (FW service on all machine is disabled in GOLd image)// Thanks and Regards Jose

    Read the article

  • Belkin router issue

    - by walr1
    Hi, My cousin and I bought a wireless Belkin router for testing purposes. Please keep in mind for all of our tests there is no ethernet cable plugged in, just the router's power cord. We have been trying to "flood" it with PING requests on its default address 192.168.2.1, but it isn't doing a thing; not even logging any attempts of too many requests. I've disabled the firewall, disabled PING request block, etc. Any idea why this thing isn't being affected? We sent 4 million packets and it hasn't done a thing. Quite odd! Thanks.

    Read the article

  • Problems Running Cherokee Web Server Admin - config_reader.c:249 - Parsing error

    - by Sebastian
    I'm running Cherokee web server 0.99.30 on (Ubuntu Hardy) and I have been having some issues getting the admin to run property. When I run sudo cherokee-admin -b Login: User: admin One-time Password: {password} Web Interface: URL: http://localhost:9090/ [20/11/2009 22:57:29.733] (error) config_reader.c:249 - Parsing error Cherokee Web Server 0.99.30 (Nov 20 2009): Listening on port ALL:9090, TLS disabled, IPv6 disabled, using epoll, 4096 fds system limit, max. 2041 connections, caching I/O, single thread When I go to the admin page I get a 503 Service Unavailable error page. Any idea about how I could fix this? Thanks

    Read the article

  • Getting 0x80070043 error when accessing Samba share from Windows 7

    - by FelixM
    I created a Samba share on my new Ubuntu 10.04 machine. When I try to access it from a Windows 7 client, I get network error 0x80070043 (The network path not found). However, I get this error when I click on the share in the Windows Explorer, so it seems that Windows does find the path. I already enabled NTLMv1, disabled 128bit security and made sure that NetBIOS is running. I briefly disabled the Windows firewall, it didn't make a difference. What could be the problem?

    Read the article

  • Enabling DMA in pc with windows 7

    - by Mugen
    I was checking my pc settings using AIDA64 (supposed to be the successor for Everest - it basically shows you detailed hardware you currently have). For my ATA hard disk it shows the setting for DMA as "supported, disabled". But when I checked the windows setting I see that it is actually enabled. How can I find out which is correct? And if its disabled what do I do to enable it? Thanks for your help. Here are some screenshots for this:

    Read the article

  • Manipulate multiple check boxes by ID using unobtrusive java script?

    - by Dean
    I want to be able to select multiple check boxes onmouseover, but instead of applying onmouseover to every individual box, I've been trying to work out how to do so by manipulating check boxes by ID instead, although I'm not sure where to go from using getElementById,. So instead of what you see below. <html> <head> <script> var Toggle = true; var Highlight=false; function handleKeyPress(evt) { var nbr; if (window.Event) nbr = evt.which; else nbr = event.keyCode; if(nbr==16)Highlight=true; return true; } function MakeFalse(){Highlight=false;} function SelectIt(X){ if(X.checked && Toggle)X.checked=false; else X.checked=true; } function ChangeText() { var test1 = document.getElementById("1"); test1.innerHTML = "onmouseover=SelectIt(this)" } </script> </head> <body> <form name="A"> <input type="checkbox" name="C1" onmouseover="SelectIt(this)" id="1"><br> <input type="checkbox" name="C2" onmouseover="SelectIt(this)" id="2"><br> <input type="checkbox" name="C3" onmouseover="SelectIt(this)" id="3"><br> <input type="checkbox" name="C4" onmouseover="SelectIt(this)" checked="" disabled="disabled" id="4"><br> <input type="checkbox" name="C5" onmouseover="SelectIt(this)" id="5"><br> <input type="checkbox" name="C6" onmouseover="SelectIt(this)" id="6"><br> <input type="checkbox" name="C7" onmouseover="SelectIt(this)" id="7"><br> <input type="checkbox" name="C8" onmouseover="SelectIt(this)" id="8"><br> </form> </body> </html> I want to be able to apply the onmousover effect to an array of check boxes like this <form name="A"> <input type="checkbox" name="C1" id="1"><br> <input type="checkbox" name="C2" id="2"><br> <input type="checkbox" name="C3" id="3"><br> <input type="checkbox" name="C4" checked="" disabled="disabled" id="4"><br> <input type="checkbox" name="C5" id="5"><br> <input type="checkbox" name="C6" id="6"><br> <input type="checkbox" name="C7" id="7"><br> <input type="checkbox" name="C8" id="8"><br> </form> After trying the search feature of stackoverflow.com and looking around on Google I haven't been able to a find a solution that makes sense to me thus far, although I'm still in the process of learning so I fear I might be trying to do something too advanced for my level of knowledge.

    Read the article

  • PHP 5.2 installation with GD on CentOS 6

    - by Pratik Thakkar
    I am trying to install PHP 5.2.17 on CentOS 6.2. I have downloaded RPMs from http://www6.atomicorp.com/channels/atomic/centos/6/i386/RPMs/ Problem is that the PHP RPM seems to have GD disabled by default. Hence in spite installing php-gd RPM, GD is disabled. Is there any way that I can enable GD. Atomicorp seems to be the only website that has PHP 5.2.17 RPMs. I am not an advanced user to be able to compile PHP. I would appreciate help on this.

    Read the article

  • Why can't add a hot spare in freebsd? Can anybody help me fix it?

    - by hamlet
    Why can't add a hot spare? Can anybody help me fix it? mfiutil add e1:s1 mfid0 mfiutil: Drive 1 is not available My mfi status:: mfiutil show config mfi0 Configuration: 1 arrays, 1 volumes, 0 spares array 0 of 2 drives: drive 0 ( 137G) ONLINE <HITACHI HUS153014VLS300 A410 serial=JFWHSB4C> SAS enclosure 1, slot 0 drive 1 ( 137G) ONLINE <HITACHI HUS153014VLS300 A410 serial=JFWJ3AEC> SAS enclosure 1, slot 1 volume mfid0 (136G) RAID-1 64K OPTIMAL spans: array 0 mfiutil show events 1468 (boot + 25s/BATTERY/WARN) - Battery removed 1475 (boot + 52s/DRIVE/WARN) - PD 00(e1/s0) is not a certified drive 1478 (boot + 52s/DRIVE/WARN) - PD 01(e1/s1) is not a certified drive 1480 (boot + 64s/BATTERY/WARN) - BBU disabled; changing WB virtual disks to WT mfiutil show volumes mfi0 Volumes: Id Size Level Stripe State Cache Name mfid0 ( 136G) RAID-1 64K OPTIMAL Disabled

    Read the article

  • Audio services in windows 7

    - by infant programmer 'Aravind'
    In an attempt of blocking a viral service on my system (which was restarting my system automatically for every 30 seconds), I disabled all the services, and later enabled trustworthy services only. (note: Hide all microsoft services didn't work blocking the auto restart so I disabled all services) Now I have been succeeded in blocking automatic restart and I am able to access internet and all other necessary stuffs. Well, however system audio is mute(definitely because a necessary service is not running). Now I need a list of services that need to be started (set automatic) on windows 7.

    Read the article

  • Configured MySQL for SSL , but SLL is still not in use..!

    - by Sunrays
    I configured SSL for MySQL using the following script. #!/bin/bash # mkdir -p /root/abc/ssl_certs cd /root/abc/ssl_certs # echo "--> 1. Create CA cert, private key" openssl genrsa 2048 > ca-key.pem echo "--> 2. Create CA cert, certificate" openssl req -new -x509 -nodes -days 1000 -key ca-key.pem > ca-cert.pem echo "--> 3. Create Server certificate, key" openssl req -newkey rsa:2048 -days 1000 -nodes -keyout server-key.pem > server-req.pem echo "--> 4. Create Server certificate, cert" openssl x509 -req -in server-req.pem -days 1000 -CA ca-cert.pem -CAkey ca-key.pem -set_serial 01 > server-cert.pem echo "" echo echo "" echo "--> 5. Create client certificate, key. Use DIFFERENT common name then server!!!!" echo "" openssl req -newkey rsa:2048 -days 1000 -nodes -keyout client-key.pem > client-req.pem echo "6. Create client certificate, cert" openssl x509 -req -in client-req.pem -days 1000 -CA ca-cert.pem -CAkey ca-key.pem -set_serial 01 > client-cert.pem exit 0 The following files were created: ca-key.pem ca-cert.pem server-req.pem server-key.pem server-cert.pem client-req.pem client-key.pem client-cert.pem Then I combined server-cert.pem and client-cert.pem into ca.pem (I read in a post to do so..) I created a ssl user in MySQL: GRANT ALL ON *.* to sslsuer@hostname IDENTIFIED BY 'pwd' REQUIRE SSL; Next I added the following in my.cnf [mysqld] ssl-ca = /root/abc/ssl_certs/ca.pem ssl-cert = /root/abc/ssl_certs/server-cert.pem ssl-key = /root/abc/ssl_certs/server-key.pem After restarting the server,I connected to mysql but SSL was still not in use :( mysql -u ssluser -p SSL: Not in use Even the have_ssl parameter was still showing disabled.. :( mysql> show variables like '%ssl%'; +---------------+---------------------------------------------+ | Variable_name | Value | +---------------+---------------------------------------------+ | have_openssl | DISABLED | | have_ssl | DISABLED | | ssl_ca | /root/abc/ssl_certs/ca.pem | | ssl_capath | | | ssl_cert | /root/abc/ssl_certs/server-cert.pem | | ssl_cipher | | | ssl_key | /root/abc/ssl_certs/server-key.pem | +---------------+---------------------------------------------+ Have I missed any step, or whats wrong.. Answers with missed steps in detail will be highly appreciated..

    Read the article

  • What is the difference between /sbin/nologin and /bin/false?

    - by Michael Hampton
    I have often heard it recommended that a user account should be disabled by setting its shell to /bin/false. But, on my existing Linux systems, I see that a great number of existing accounts (all of them service accounts) have a shell of /sbin/nologin instead. I see from the man page that /sbin/nologin prints a message to the user saying the account is disabled, and then exits. Presumably /bin/false would not print anything. I also see that /sbin/nologin is listed in /etc/shells, while /bin/false is not. The man page says that FTP will disable access for users with a shell not listed in /etc/shells and implies that other programs may do the same. Does that mean that somebody could FTP in with an account that has /sbin/nologin as its shell? What is the difference here? Which one of these should I use to disable a user account, and in what circumstances? What other effects does a listing in /etc/shells have?

    Read the article

  • jQuery line 67 saying "TypeError: 'undefined' is not a function."

    - by dfdf
    var dbShell; function doLog(s){ /* setTimeout(function(){ console.log(s); }, 3000); */ } function dbErrorHandler(err){ alert("DB Error: "+err.message + "\nCode="+err.code); } function phoneReady(){ doLog("phoneReady"); //First, open our db dbShell = window.openDatabase("SimpleNotes", 2, "SimpleNotes", 1000000); doLog("db was opened"); //run transaction to create initial tables dbShell.transaction(setupTable,dbErrorHandler,getEntries); doLog("ran setup"); } //I just create our initial table - all one of em function setupTable(tx){ doLog("before execute sql..."); tx.executeSql("CREATE TABLE IF NOT EXISTS notes(id INTEGER PRIMARY KEY,title,body,updated)"); doLog("after execute sql..."); } //I handle getting entries from the db function getEntries() { //doLog("get entries"); dbShell.transaction(function(tx) { tx.executeSql("select id, title, body, updated from notes order by updated desc",[],renderEntries,dbErrorHandler); }, dbErrorHandler); } function renderEntries(tx,results){ doLog("render entries"); if (results.rows.length == 0) { $("#mainContent").html("<p>You currently do not have any notes.</p>"); } else { var s = ""; for(var i=0; i<results.rows.length; i++) { s += "<li><a href='edit.html?id="+results.rows.item(i).id + "'>" + results.rows.item(i).title + "</a></li>"; } $("#noteTitleList").html(s); $("#noteTitleList").listview("refresh"); } } function saveNote(note, cb) { //Sometimes you may want to jot down something quickly.... if(note.title == "") note.title = "[No Title]"; dbShell.transaction(function(tx) { if(note.id == "") tx.executeSql("insert into notes(title,body,updated) values(?,?,?)",[note.title,note.body, new Date()]); else tx.executeSql("update notes set title=?, body=?, updated=? where id=?",[note.title,note.body, new Date(), note.id]); }, dbErrorHandler,cb); } function init(){ document.addEventListener("deviceready", phoneReady, false); //handle form submission of a new/old note $("#editNoteForm").live("submit",function(e) { var data = {title:$("#noteTitle").val(), body:$("#noteBody").val(), id:$("#noteId").val() }; saveNote(data,function() { $.mobile.changePage("index.html",{reverse:true}); }); e.preventDefault(); }); //will run after initial show - handles regetting the list $("#homePage").live("pageshow", function() { getEntries(); }); //edit page logic needs to know to get old record (possible) $("#editPage").live("pageshow", function() { var loc = $(this).data("url"); if(loc.indexOf("?") >= 0) { var qs = loc.substr(loc.indexOf("?")+1,loc.length); var noteId = qs.split("=")[1]; //load the values $("#editFormSubmitButton").attr("disabled","disabled"); dbShell.transaction( function(tx) { tx.executeSql("select id,title,body from notes where id=?",[noteId],function(tx,results) { $("#noteId").val(results.rows.item(0).id); $("#noteTitle").val(results.rows.item(0).title); $("#noteBody").val(results.rows.item(0).body); $("#editFormSubmitButton").removeAttr("disabled"); }); }, dbErrorHandler); } else { $("#editFormSubmitButton").removeAttr("disabled"); } }); } Dats my code, awfully long, huh? Well anyways I got most of it from here, however I get an error on line 67 saying "TypeError: 'undefined' is not a function.". I'm using Steroids (phonegap-like) and testing dis on an iPhone simulator. I'm sure it uses some cordova for the database work. Thank you for your help :-)

    Read the article

  • Hyper-V extensible virtual switch disables network

    - by Sebastian Krysmanski
    I just installed the Hyper-V role on my Windows Server 2012. It comes with something called a "Hyper-V extensible virtual switch". I assigned it to the only network card in my server. By doing so, the network card became useless/disabled/inactive/.. because the virtual switch disabled all features (IPv4, IPv6, Client for Microsoft Networks, ...) on the network adapter. Is this supposed to happen? I admit I've no idea what this "extensible virtual switch" actually does. A short explanation would be nice as well.

    Read the article

  • VirtualBox won't use any kind of hardware acceleration

    - by burnersk
    I see an problem with VirtualBox hardware acceleration functionality... My system configuration: MSI PH67A-C43 (B3) (BIOS: 2.70) Intel Core i5-2400 Windows 7 Professional SP1 64-bit Oracle VirtualBox 4.1.10 Oracle VirtualBox Extension Pack 4.1.10 I can select the individual acceleration options such as PAE/NX, VT-x/VMD-V or Nested Paging within VM-Settings but if I start the VM the accelerations will be disabled as of the tooltip from CPU (right next to shared folders). Each acceleration is "Disabled". Does this sounds familar to anybody? How can I solve this?

    Read the article

  • Unable to delete all partitions on flash drive using Windows 7 OS??

    - by irrational John
    Recently I purchased an ADATA C802 8GB flash drive. Since the drive was new I decided to run some of the HD Tune Pro (v4.50) performance tests on it, mostly just for the heck of it. To avoid accidently destroying data HD Tune refuses to write to a drive unless there are no partitions on the drive. If you do attempt to write to a drive with partitions, it posts the message "Writing is disabled. To enable writing please remove all partitions." As you would expect, the ADATA came formatted with a single primary FAT32 partition in the Master Boot Record. But a number of unexpected things happened when I attempted to delete that partition. The first thing I tried was to use the Windows 7 (64-bit) Disk Management tool (diskmgmt.msc) to delete the partition. It would not let me. The context menu choice to delete that volume was not available. Next I opened up a command prompt window with Admin authority and ran diskpart. Diskpart deleted the volume for me. However, when I attempted to run an HD Tune write test on the drive I still got the "Writing is disabled" message. Huh??? So I fired up a utility I have which allows viewing drives at the sector level and verified that the partition table in the Master Boot Record was empty. No partitions. Yet HD Tune still thought there were partitions on the drive? So why was I still getting the "Writing is disabled" message from HD Tune Pro? And why wouldn't the Windows 7 Disk Management tool let me change the partitions on this drive. After doing the above, I plugged the ADATA into my MacBook. I was then able to format it as either a GPT or MBR partitioned drive with no problems. I am not looking for suggestions on how to format this drive. I can do that. What I do not understand and was hoping I might get insight into is why this drive behaves so strangely under Windows 7? And BTW, what's up with HD Tune Pro? BTW, if I plug the drive I formatted on my MacBook back into my Windows 7 64-bit system I still run into road blocks with the Disk Management tool. For example, I cannot delete all the GPT partitions on the ADATA so I can convert it into an MBR drive. I following Microsoft's instructions, the instructions just do not work with this ADATA flash drive. Anyone know what's up with this? It makes no sense to me. Has something changed in Windows 7 (Vista)??

    Read the article

  • IIS cannot access itself

    - by dave
    We are on a corporate network that uses ISA and I am having issues trying to not have requests go through ISA. I have IIS7 on my local Windows 7 machine that has websites and a service layer. The websites access the service layer using a xxxx.servicelayer.local address that is set up in my HOSTS file to point to 127.0.0.1. I have Windows Firewall client which I have disabled. I have tried both adding this address into IE so that it does not go through ISA and also disabled this section altogether. When the website (which is actually IIS making the request to itself) tries to access the service layer I receive an ISA error that proxy authentication has failed. Considering that everything I can see to configure is set to not go through the proxy, ISA, I cannot see how this is actually going through the proxy and giving this error. Is there something within Windows 7 that forces the proxy setting, some sort of caching or similar?

    Read the article

  • tastypie posting and full example

    - by Justin M
    Is there a full tastypie django example site and setup available for download? I have been wrestling with wrapping my head around it all day. I have the following code. Basically, I have a POST form that is handled with ajax. When I click "submit" on my form and the ajax request runs, the call returns "POST http://192.168.1.110:8000/api/private/client_basic_info/ 404 (NOT FOUND)" I have the URL configured alright, I think. I can access http://192.168.1.110:8000/api/private/client_basic_info/?format=json just fine. Am I missing some settings or making some fundamental errors in my methods? My intent is that each user can fill out/modify one and only one "client basic information" form/model. a page: {% extends "layout-column-100.html" %} {% load uni_form_tags sekizai_tags %} {% block title %}Basic Information{% endblock %} {% block main_content %} {% addtoblock "js" %} <script language="JavaScript"> $(document).ready( function() { $('#client_basic_info_form').submit(function (e) { form = $(this) form.find('span.error-message, span.success-message').remove() form.find('.invalid').removeClass('invalid') form.find('input[type="submit"]').attr('disabled', 'disabled') e.preventDefault(); var values = {} $.each($(this).serializeArray(), function(i, field) { values[field.name] = field.value; }) $.ajax({ type: 'POST', contentType: 'application/json', data: JSON.stringify(values), dataType: 'json', processData: false, url: '/api/private/client_basic_info/', success: function(data, status, jqXHR) { form.find('input[type="submit"]') .after('<span class="success-message">Saved successfully!</span>') .removeAttr('disabled') }, error: function(jqXHR, textStatus, errorThrown) { console.log(jqXHR) console.log(textStatus) console.log(errorThrown) var errors = JSON.parse(jqXHR.responseText) for (field in errors) { var field_error = errors[field][0] $('#id_' + field).addClass('invalid') .after('<span class="error-message">'+ field_error +'</span>') } form.find('input[type="submit"]').removeAttr('disabled') } }) // end $.ajax() }) // end $('#client_basic_info_form').submit() }) // end $(document).ready() </script> {% endaddtoblock %} {% uni_form form form.helper %} {% endblock %} resources from residence.models import ClientBasicInfo from residence.forms.profiler import ClientBasicInfoForm from tastypie import fields from tastypie.resources import ModelResource from tastypie.authentication import BasicAuthentication from tastypie.authorization import DjangoAuthorization, Authorization from tastypie.validation import FormValidation from tastypie.resources import ModelResource, ALL, ALL_WITH_RELATIONS from django.core.urlresolvers import reverse from django.contrib.auth.models import User class UserResource(ModelResource): class Meta: queryset = User.objects.all() resource_name = 'user' fields = ['username'] filtering = { 'username': ALL, } include_resource_uri = False authentication = BasicAuthentication() authorization = DjangoAuthorization() def dehydrate(self, bundle): forms_incomplete = [] if ClientBasicInfo.objects.filter(user=bundle.request.user).count() < 1: forms_incomplete.append({'name': 'Basic Information', 'url': reverse('client_basic_info')}) bundle.data['forms_incomplete'] = forms_incomplete return bundle class ClientBasicInfoResource(ModelResource): user = fields.ForeignKey(UserResource, 'user') class Meta: authentication = BasicAuthentication() authorization = DjangoAuthorization() include_resource_uri = False queryset = ClientBasicInfo.objects.all() resource_name = 'client_basic_info' validation = FormValidation(form_class=ClientBasicInfoForm) list_allowed_methods = ['get', 'post', ] detail_allowed_methods = ['get', 'post', 'put', 'delete'] Edit: My resources file is now: from residence.models import ClientBasicInfo from residence.forms.profiler import ClientBasicInfoForm from tastypie import fields from tastypie.resources import ModelResource from tastypie.authentication import BasicAuthentication from tastypie.authorization import DjangoAuthorization, Authorization from tastypie.validation import FormValidation from tastypie.resources import ModelResource, ALL, ALL_WITH_RELATIONS from django.core.urlresolvers import reverse from django.contrib.auth.models import User class UserResource(ModelResource): class Meta: queryset = User.objects.all() resource_name = 'user' fields = ['username'] filtering = { 'username': ALL, } include_resource_uri = False authentication = BasicAuthentication() authorization = DjangoAuthorization() #def apply_authorization_limits(self, request, object_list): # return object_list.filter(username=request.user) def dehydrate(self, bundle): forms_incomplete = [] if ClientBasicInfo.objects.filter(user=bundle.request.user).count() < 1: forms_incomplete.append({'name': 'Basic Information', 'url': reverse('client_basic_info')}) bundle.data['forms_incomplete'] = forms_incomplete return bundle class ClientBasicInfoResource(ModelResource): # user = fields.ForeignKey(UserResource, 'user') class Meta: authentication = BasicAuthentication() authorization = DjangoAuthorization() include_resource_uri = False queryset = ClientBasicInfo.objects.all() resource_name = 'client_basic_info' validation = FormValidation(form_class=ClientBasicInfoForm) #list_allowed_methods = ['get', 'post', ] #detail_allowed_methods = ['get', 'post', 'put', 'delete'] def apply_authorization_limits(self, request, object_list): return object_list.filter(user=request.user) I made the user field of the ClientBasicInfo nullable and the POST seems to work. I want to try updating the entry now. Would that just be appending the pk to the ajax url? For example /api/private/client_basic_info/21/? When I submit that form I get a 501 NOT IMPLEMENTED message. What exactly haven't I implemented? I am subclassing ModelResource, which should have all the ORM-related functions implemented according to the docs.

    Read the article

  • Group policy to disable notifications of particular errors?

    - by resolver101
    How do i disable the notifications of particular errors? A little background to my issue. During the installation of the Kaspersky, it disables all the windows firewall for all except the domain. I have remedied this by creating an offline policy in Kaspersky which enables the Kaspersky firewall when out of the office (ie not connected to the office network). The problem now is that users in the office now see a notification showing that the firewall is disabled even though it’s enabled in all scenarios. It’s just that work and home show as disabled when the clients are connected to the office LAN. I’ve looked into the notifications and you can disable the notification (not recommended) but I don’t want to do this incase other relevant messages are stopped from being displayed. http://blogs.technet.com/b/networking/archive/2010/12/16/disabling-firewall-alerts-in-the-action-center.aspx

    Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >