Search Results

Search found 8664 results on 347 pages for 'lost with coding'.

Page 310/347 | < Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >

• Airline mess - what a journey

  - by Mike Dietrich

  What a day, what a journey ... Flew this noon from Munich to Zuerich for catch my ongoing flight to San Francisco with Swiss. And that day did start very well as Lufthansa messed up the connection flight by 42 minutes for a 35 minute flight. And as I was obviously the only passenger connection to San Francisco nobody picked me up at the airplane to bring me directly to my connection as Swiss did for the 8 passengers connection to Miami. So I missed my flight. What a start - and many thanks to Lufthansa. I was not the only one missing a connection as Lufthansa/Swiss had canceled the flight before due to "technical problems". In Zuerich Swiss did rebook me via Frankfurt with Lufthansa to board a United Airlines flight to San Francisco. "Ouch" I thought. I had my share of experience with United already as they've messed up my luggage on the way to San Francisco some years ago and it took them five (!!!) days to fly my bag over and deliver it. But actually it was the only option today. So I said "Yes". A big mistake as I've learned later on. The Frankfurt flight was delayed as well "due to a late incoming aircraft". But there was plenty of time. And I went to the Swiss counter at the gate and let them check if my baggage is on that flight to Frankfurt. They've said "Yes". Boarding the plane with a delay of 45 minutes (the typical Lufthansa delay these days) I spotted my Rimowa trolley right next to the plane on the airfield. So I was sure that it will be send to Frankfurt. In Frankfurt I went to the United counter once it did open - had to go through the passport check they do for US flights as well - and they've said "Yes, your luggage is with us". Well ... Arriving in San Francisco with just a bit of a some minutes delay and a very fast immigration procedure I saw the first bags with Priority tags getting pushed to the baggage claim - but mine was not there. I did wait ... and wait ... and wait. Well, thanks United, you did it again!!! I flew twice in the past years United Airlines - and in both cases they've messed up my luggage on the way to San Francisco. How lovely is that ... Now the real fun started again as the lady at the "Lost and Found" counter for luggage spotted my luggage in her system in Zuerich - and told me it's supposed to be sent with LH1191 to Frankfurt on Sept 27. But this was yesterday in Europe - it's already Sept 28 - and I saw my luggage in front of the airplane. So I'd suppose it's in Frankfurt already. But what could she do? Nothing but doing the awful paperwork. And "No Mr Dietrich, we don't call international numbers". Thank you, United. Next time I'll try to get a contract for a US land line in advance. They can't even tell you which plane will bring your luggage. It may be tomorrow with UA flight arriving around 4pm in SFO. I'm looking forward to some hours in the wonderful United Airlines call center waiting line. Last time I did spend 60-90 minutes every day until I got my luggage. If it takes again that long then OOW will be over by then. I love airline travel - and especially with United Airlines. And by the way ... they gave us these nice fancy packages during the flight:  That looks good - what's in that box??? Yes, really ... a bag of potato chips. Pure fat - very healthy.  I doubt that I'll ever fly United Airlines again!!!

  Read the article

• Relative cam movement and momentum on arbitrary surface

  - by user29244

  I have been working on a game for quite long, think sonic classic physics in 3D or tony hawk psx, with unity3D. However I'm stuck at the most fundamental aspect of movement. The requirement is that I need to move the character in mario 64 fashion (or sonic adventure) aka relative cam input: the camera's forward direction always point input forward the screen, left or right input point toward left or right of the screen. when input are resting, the camera direction is independent from the character direction and the camera can orbit the character when input are pressed the character rotate itself until his direction align with the direction the input is pointing at. It's super easy to do as long your movement are parallel to the global horizontal (or any world axis). However when you try to do this on arbitrary surface (think moving along complex curved surface) with the character sticking to the surface normal (basically moving on wall and ceiling freely), it seems harder. What I want is to achieve the same finesse of movement than in mario but on arbitrary angled surfaces. There is more problem (jumping and transitioning back to the real world alignment and then back on a surface while keeping momentum) but so far I didn't even take off the basics. So far I have accomplish moving along the curved surface and the relative cam input, but for some reason direction fail all the time (point number 3, the character align slowly to the input direction). Do you have an idea how to achieve that? Here is the code and some demo so far: The demo: https://dl.dropbox.com/u/24530447/flash%20build/litesonicengine/LiteSonicEngine5.html Camera code: using UnityEngine; using System.Collections; public class CameraDrive : MonoBehaviour { public GameObject targetObject; public Transform camPivot, camTarget, camRoot, relcamdirDebug; float rot = 0; //---------------------------------------------------------------------------------------------------------- void Start() { this.transform.position = targetObject.transform.position; this.transform.rotation = targetObject.transform.rotation; } void FixedUpdate() { //the pivot system camRoot.position = targetObject.transform.position; //input on pivot orientation rot = 0; float mouse_x = Input.GetAxisRaw( "camera_analog_X" ); // rot = rot + ( 0.1f * Time.deltaTime * mouse_x ); // wrapAngle( rot ); // //when the target object rotate, it rotate too, this should not happen UpdateOrientation(this.transform.forward,targetObject.transform.up); camRoot.transform.RotateAround(camRoot.transform.up,rot); //debug the relcam dir RelativeCamDirection() ; //this camera this.transform.position = camPivot.position; //set the camera to the pivot this.transform.LookAt( camTarget.position ); // } //---------------------------------------------------------------------------------------------------------- public float wrapAngle ( float Degree ) { while (Degree < 0.0f) { Degree = Degree + 360.0f; } while (Degree >= 360.0f) { Degree = Degree - 360.0f; } return Degree; } private void UpdateOrientation( Vector3 forward_vector, Vector3 ground_normal ) { Vector3 projected_forward_to_normal_surface = forward_vector - ( Vector3.Dot( forward_vector, ground_normal ) ) * ground_normal; camRoot.transform.rotation = Quaternion.LookRotation( projected_forward_to_normal_surface, ground_normal ); } float GetOffsetAngle( float targetAngle, float DestAngle ) { return ((targetAngle - DestAngle + 180)% 360) - 180; } //---------------------------------------------------------------------------------------------------------- void OnDrawGizmos() { Gizmos.DrawCube( camPivot.transform.position, new Vector3(1,1,1) ); Gizmos.DrawCube( camTarget.transform.position, new Vector3(1,5,1) ); Gizmos.DrawCube( camRoot.transform.position, new Vector3(1,1,1) ); } void OnGUI() { GUI.Label(new Rect(0,80,1000,20*10), "targetObject.transform.up : " + targetObject.transform.up.ToString()); GUI.Label(new Rect(0,100,1000,20*10), "target euler : " + targetObject.transform.eulerAngles.y.ToString()); GUI.Label(new Rect(0,100,1000,20*10), "rot : " + rot.ToString()); } //---------------------------------------------------------------------------------------------------------- void RelativeCamDirection() { float input_vertical_movement = Input.GetAxisRaw( "Vertical" ), input_horizontal_movement = Input.GetAxisRaw( "Horizontal" ); Vector3 relative_forward = Vector3.forward, relative_right = Vector3.right, relative_direction = ( relative_forward * input_vertical_movement ) + ( relative_right * input_horizontal_movement ) ; MovementController MC = targetObject.GetComponent<MovementController>(); MC.motion = relative_direction.normalized * MC.acceleration * Time.fixedDeltaTime; MC.motion = this.transform.TransformDirection( MC.motion ); //MC.transform.Rotate(Vector3.up, input_horizontal_movement * 10f * Time.fixedDeltaTime); } } Mouvement code: using UnityEngine; using System.Collections; public class MovementController : MonoBehaviour { public float deadZoneValue = 0.1f, angle, acceleration = 50.0f; public Vector3 motion ; //-------------------------------------------------------------------------------------------- void OnGUI() { GUILayout.Label( "transform.rotation : " + transform.rotation ); GUILayout.Label( "transform.position : " + transform.position ); GUILayout.Label( "angle : " + angle ); } void FixedUpdate () { Ray ground_check_ray = new Ray( gameObject.transform.position, -gameObject.transform.up ); RaycastHit raycast_result; Rigidbody rigid_body = gameObject.rigidbody; if ( Physics.Raycast( ground_check_ray, out raycast_result ) ) { Vector3 next_position; //UpdateOrientation( gameObject.transform.forward, raycast_result.normal ); UpdateOrientation( gameObject.transform.forward, raycast_result.normal ); next_position = GetNextPosition( raycast_result.point ); rigid_body.MovePosition( next_position ); } } //-------------------------------------------------------------------------------------------- private void UpdateOrientation( Vector3 forward_vector, Vector3 ground_normal ) { Vector3 projected_forward_to_normal_surface = forward_vector - ( Vector3.Dot( forward_vector, ground_normal ) ) * ground_normal; transform.rotation = Quaternion.LookRotation( projected_forward_to_normal_surface, ground_normal ); } private Vector3 GetNextPosition( Vector3 current_ground_position ) { Vector3 next_position; // //-------------------------------------------------------------------- // angle = 0; // Vector3 dir = this.transform.InverseTransformDirection(motion); // angle = Vector3.Angle(Vector3.forward, dir);// * 1f * Time.fixedDeltaTime; // // if(angle > 0) this.transform.Rotate(0,angle,0); // //-------------------------------------------------------------------- next_position = current_ground_position + gameObject.transform.up * 0.5f + motion ; return next_position; } } Some observation: I have the correct input, I have the correct translation in the camera direction ... but whenever I attempt to slowly lerp the direction of the character in direction of the input, all I get is wild spin! Sad Also discovered that strafing to the right (immediately at the beginning without moving forward) has major singularity trapping on the equator!! I'm totally lost and crush (I have already done a much more featured version which fail at the same aspect)

  Read the article

• Easiest, most fun way to program 2D games? Flash? XNA? Some other engine?

  - by Maxi

  Hi, this is a post detailing my search for the most enjoyable way for a hobbyist game programmer to sweeten his free time with making a game. My requirements: I looked at Flash first, I made a couple of small games but I'm doubtful of the performance. I would like to make a fairly large strategy game, with several hundred units fighting simultaneously, explosions and animations included. Also zoomable maps. I saw that Adobe has a new 3D API for Flash, but I don't know if that improves 2D performance aswell, I couldn't find anything related to that question on their MAX10 sessions. Would you say that Flash is a good technology for making large 2D games easily? I really like Actionscript, and I love how easy everything is in Flash. There are several engines available which make it even easier. I just do this for fun, and it would be even better if there were proper animation/particle editors available and if the engine I were to use, would be available for multiple platforms. (so more people can play my game once finished). I'd like to have it available on many mobile platforms aswell. (because I love touch input for some reason) I do know the XNA framework pretty well, but there are no good engines available for it, and it will only run on Windows, which is a huge turn off. Even bigger is, that you need to install the XNA redistributable each time you want to give the game to someone. If I use XNA, I would have to make all the tools myself, and I'd probably have to make them with WPF. (I'd love to make tools with Adobe AIR, but unfortunately the API's for image manipulation etc. are far worse in Flash, than they are in XNA/WPF.) Now, I'm aware that I could make my own engine that supports each of those platforms, but quite frankly, that would be too much work plowing through APIs. After all, I want to make a game, not an engine. So the question becomes: Is there maybe a cross platform (free or free to develop?) engine available that I could use for 2D development? I prefer: C#, Actionscript. I don't mind using c++ if the toolset is above average, but I highly doubt that there is something out there like that. Please prove me wrong :) So summary: I'd like to use Flash, but I don't know if it scales well enough. I'm not a scripter, I want some real APIs that I can work with inside a proper IDE. Just for information, I looked at several alternatives, I'm actually looking for a long time already. You'd help me a lot to make a decision finally. Feature-wise the Flatredball engine would be ideal. But I tried their tools, and quite frankly, they are horrible. Absolutely unusable, I'd need to make my own for sure. I didn't look at their API, but if their tools are so bad, I'm not inclined to look further. Unity3D. This one is quite nice, but I really don't need 3D, and it is quite ...a lot of work to learn. I also don't like that it is so expensive to use for different platforms and that I can only code for it through scripting. You have to buy each platform separately. The editor usability is average, the product overall is good enough for most purposes, but learning it myself would be overkill. Shiva 3D. It looks good enough, but again: I don't really need 3D. The editor usability is a little worse than Unity3D in my opinion and it wasn't clear to me how to start programming. I think it requires C++ for coding, so that's a negative too. I want to have fun, and c# is fun ;) SDL. Quite frankly, I'd still need to port to all those different SDL implementations. And I don't like OpenGL style programming, it's just plain ugly. And it needs c++, I know that there might be some wrappers available, but I don't like to use wrappers, because... Irrlicht. A lot of features, but support seems to be low and it is aimed at enthusiasts. C# bindings get dropped repeatedly. I'm not an engine enthusiast, I just want to make a game. I don't see this happening with Irrlicht. Ogre3D. Way too much work, it's just a graphics engine. Also no multiple platform support and c++. Torque2D. Costs something to use, and I didn't hear a lot of good things about support and documentation. Also costs extra for each platform.

  Read the article

• On Reflector Pricing

  - by Nick Harrison

  I have heard a lot of outrage over Red Gate's decision to charge for Reflector. In the interest of full disclosure, I am a fan of Red Gate. I have worked with them on several usability tests. They also sponsor Simple Talk where I publish articles. They are a good company. I am also a BIG fan of Reflector. I have used it since Lutz originally released it. I have written my own add-ins. I have written code to host reflector and use its object model in my own code. Reflector is a beautiful tool. The care that Lutz took to incorporate extensibility is amazing. I have never had difficulty convincing my fellow developers that it is a wonderful tool. Almost always, once anyone sees it in action, it becomes their favorite tool. This wide spread adoption and usability has made it an icon and pivotal pillar in the DotNet community. Even folks with the attitude that if it did not come out of Redmond then it must not be any good, still love it. It is ironic to hear everyone clamoring for it to be released as open source. Reflector was never open source, it was free, but you never were able to peruse the source code and contribute your own changes. You could not even use Reflector to view the source code. From the very beginning, it was never anyone's intention for just anyone to examine the source code and make their own contributions aside from the add-in model. Lutz chose to hand over the reins to Red Gate because he believed that they would be able to build on his original vision and keep the product viable and effective. He did not choose to make it open source, hoping that the community would be up to the challenge. The simplicity and elegance may well have been lost with the "design by committee" nature of open source. Despite being a wonderful and beloved tool, Reflector cannot be an easy tool to maintain. Maybe because it is so wonderful and beloved, it is even more difficult to maintain. At any rate, we have high expectations. Reflector must continue to be able to reasonably disassemble every language construct that the framework and core languages dream up. We want it to be fast, and we also want it to continue to be simple to use. No small order. Red Gate tried to keep the core product free. Sadly there was not enough interest in the Pro version to subsidize the rest of the expenses. $35 is a reasonable cost, more than reasonable. I have read the blog posts and forum posts complaining about the time associated with getting the expense approved. I have heard people complain about the cost being unreasonable if you are a developer from certain countries. Let's do the math. How much of a productivity boost is Reflector? How many hours do you think it saves you in a typical project? The next question is a little easier if you are a contractor or a consultant, but what is your hourly rate? If you are not a contractor, you can probably figure out an hourly rate. How long does it take to get a return on your investment? The value added proposition is not a difficult one to make. I have read people clamoring that Red Gate sucks and is evil. They complain about broken promises and conflicts of interest. Relax! Red Gate is not evil. The world is not coming to an end. The sun will come up tomorrow. I am sure that Red Gate will come up with options for volume licensing or site licensing for companies that want to get a licensed copy for their entire team. Don't panic, and I am sure that many great improvements are on the horizon. Switching the UI to WPF and including a tabbed interface opens up lots of possibilities.

  Read the article

• EM CLI, diving in and beyond!

  - by Maureen Byrne

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Doing more in less time… Isn’t that what we all strive to do? With this in mind, I put together two screen watches on Oracle Enterprise Manager 12c command line interface, or EM CLI as it is also known. There is a wealth of information on any topic that you choose to read about, from manual pages to coding documents…might I even say blog posts? In our busy lives it is so nice to just sit back with a short video, watch and learn enough to dive in. Doing more in less time, is the essence of EM CLI. It enables you to script fundamental and complex administrative tasks in an elegant way, thanks to the Jython scripting language. Repetitive tasks can be scripted and reused again and again. Sure, a Graphical User Interface provides a more intuitive step by step approach to tasks, and it provides a way of quickly becoming familiar with a product and its many features, and it is definitely the way to go when viewing performance data and historical trending…but for repetitive and complex tasks, scripting is the way to go! Lets us take the everyday task of creating an administrator. Using EM CLI in interactive mode the command could look like this.. emcli>create_user(name='jan.doe', type='EXTERNAL_USER') This command creates an administrator called jan.doe which is an externally authenticated user, possibly LDAP or SSO, defined by the EXTERNAL_USER tag. The create_user procedure takes many arguments; see the documentation for more information. Now, where EM CLI really shines and shows power is in creating multiple users. Regardless of the number, tens or thousands, the effort is the same. With the use of a standard programming construct, a loop, you can place your create_user() procedure within it. Using a loop allows you to iterate through a previously created list, creating new users until the list is complete. Using EM CLI in Script mode, your Jython loop would look something like this… for user in list_of_users:       create_user(name=user, expire=’true’, password=’welcome123’) This Jython code snippet iterates through a previously defined list of names, list_of_users, and iterates through the list, taking each name, user in this case, and creates an administrator sets the password to welcome123, but forces the user to reset it when they first login. This is only one of over four hundred procedures created to expose Oracle Enterprise Manager 12c functionality in a powerful and programmatic way. It is a few months since we released EM CLI with scripting option. We are seeing many users adapt to this fun and powerful way of using Oracle Enterprise Manager 12c. What are the first steps? Watch these screen watches, and dive in. The first screen watch steps you through where and how to download and install and how to run your first few commands. The Second screen watch steps you through a few scripts. Next time, I am going to show you the basic building blocks to writing a Jython script to perform Oracle Enterprise Manager 12c administrative tasks. Join this growing group of EM CLI users…. Dive in! Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Best Practices Generating WebService Proxies for Oracle Sales Cloud (Fusion CRM)

  - by asantaga

  I've recently been building a REST Service wrapper for Oracle Sales Cloud and initially all was going well, however as soon as I added all of my Web Service proxies I started to get weird errors..  My project structure looks like this What I found out was if I only had the InteractionsService & OpportunityService WebService Proxies then all worked ok, but as soon as I added the LocationsService Proxy, I would start to see strange JAXB errors. Example of the error message Exception in thread "main" javax.xml.ws.WebServiceException: Unable to create JAXBContextat com.sun.xml.ws.model.AbstractSEIModelImpl.createJAXBContext(AbstractSEIModelImpl.java:164)at com.sun.xml.ws.model.AbstractSEIModelImpl.postProcess(AbstractSEIModelImpl.java:94)at com.sun.xml.ws.model.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:281)at com.sun.xml.ws.client.WSServiceDelegate.buildRuntimeModel(WSServiceDelegate.java:762)at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.buildRuntimeModel(WLSProvider.java:982)at com.sun.xml.ws.client.WSServiceDelegate.createSEIPortInfo(WSServiceDelegate.java:746)at com.sun.xml.ws.client.WSServiceDelegate.addSEI(WSServiceDelegate.java:737)at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:361)at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.internalGetPort(WLSProvider.java:934)at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate$PortClientInstanceFactory.createClientInstance(WLSProvider.java:1039)...... Looking further down I see the error message is related to JAXB not being able to find an objectFactory for one of its types Caused by: java.security.PrivilegedActionException: com.sun.xml.bind.v2.runtime.IllegalAnnotationsException: 6 counts of IllegalAnnotationExceptionsThere's no ObjectFactory with an @XmlElementDecl for the element {http://xmlns.oracle.com/apps/crmCommon/activities/activitiesService/}AssigneeRsrcOrgIdthis problem is related to the following location:at protected javax.xml.bind.JAXBElement com.oracle.xmlns.apps.crmcommon.activities.activitiesservice.ActivityAssignee.assigneeRsrcOrgId at com.oracle.xmlns.apps.crmcommon.activities.activitiesservice.ActivityAssignee This is very strange... My first thoughts are that when I generated the WebService Proxy I entered the package name as "oracle.demo.pts.fusionproxy.servicename" and left the generated types as blank. This way all the generated types get put into the same package hierarchy and when deployed they get merged... Sounds resaonable and appears to work but not in this case..  To resolve this I regenerate the proxy but this time setting : Package name : To the name of my package eg. oracle.demo.pts.fusionproxy.interactionsRoot Package for Generated Types :  Package where the types will be generated to, e.g. oracle.demo.pts.fusionproxy.SalesParty.types When I ran the application now, it all works , awesome eh???? Alas no, there is a serious side effect. The problem now is that to help coding I've created a collection of helper classes , these helper classes take parameters which use some of the "generic" datatypes, like FindCriteria. e.g. This wont work any more public static FindCriteria createCustomFindCriteria(FindCriteria pFc,String pAttributes) Here lies a gremlin of a problem.. I cant use this method anymore, this is because the FindCriteria datatype is now being defined two, or more times, in the generated code for my project. If you leave the Root Package for types blank it will get generated to com.oracle.xmlns, and if you populate it then it gets generated to your custom package.. The two datatypes look the same, sound the same (and if this were a duck would sound the same), but THEY ARE NOT THE SAME... Speaking to development, they recommend you should not be entering anything in the Root Packages section, so the mystery thickens why does it work.. Well after spending sometime with some colleagues of mine in development we've identified the issue.. Alas different parts of Oracle Fusion Development have multiple schemas with the same namespace, when the WebService generator generates its classes its not seeing the other schemas properly and not generating the Object Factories correctly...  Thankfully I've found a workaround Solution Overview When generating the proxies leave the Root Package for Generated Types BLANK When you have finished generating your proxies, use the JAXB tool XJC and generate Java classes for all datatypes  Create a project within your JDeveloper11g workspace and import the java classes into this project Final bit.. within the project dependencies ensure that the JAXB/XJC generated classes are "FIRST" in the classpath Solution Details Generate the WebServices SOAP proxies When generating the proxies your generation dialog should look like this Ensure the "unwrap" parameters is selected, if it isn't then that's ok, it simply means when issuing a "get" you need to extract out the Element Generate the JAXB Classes using XJC XJC provides a command line switch called -wsdl, this (although is experimental/beta) , accepts a HTTP WSDL and will generate the relevant classes. You can put these into a single batch/shell script xjc -wsdl https://fusionservername:443/appCmmnCompInteractions/InteractionService?wsdlxjc -wsdl https://fusionservername443/opptyMgmtOpportunities/OpportunityService?wsdl Create Project in JDeveloper to store the XJC "generated" JAXB classes Within the project folder create a filesystem folder called "src" and copy the generated files into this folder. JDeveloper11g should then see the classes and display them, if it doesnt try clicking the "refresh" button In your main project ensure that the JDeveloper XJC project is selected as a dependancy and IMPORTANT make sure it is at the top of the list. This ensures that the classes are at the front of the classpath And voilà.. Hopefully you wont see any JAXB generation errors and you can use common datatypes interchangeably in your project, (e.g. FindCriteria etc)

  Read the article

• Upgrading to Code Based Migrations EF 4.3.1 with Connector/Net 6.6

  - by GABMARTINEZ

  Entity Framework 4.3.1 includes a new feature called code first migrations.  We are adding support for this feature in our upcoming 6.6 release of Connector/Net.  In this walk-through we'll see the workflow of code-based migrations when you have an existing application and you would like to upgrade to this EF 4.3.1 version and use this approach, so you can keep track of the changes that you do to your database.   The first thing we need to do is add the new Entity Framework 4.3.1 package to our application. This should via the NuGet package manager.  You can read more about why EF is not part of the .NET framework here. Adding EF 4.3.1 to our existing application  Inside VS 2010 go to Tools -> Library Package Manager -> Package Manager Console, this will open the Power Shell Host Window where we can work with all the EF commands. In order to install this library to your existing application you should type Install-Package EntityFramework This will make some changes to your application. So Let's check them. In your .config file you'll see a  <configSections> which contains the version you have from EntityFramework and also was added the <entityFramework> section as shown below. This section is by default configured to use SQL Express which won't be necesary for this case. So you can comment it out or leave it empty. Also please make sure you're using the Connector/Net 6.6.x version which is the one that has this support as is shown in the previous image. At this point we face one issue; in order to be able to work with Migrations we need the __MigrationHistory table that we don't have yet since our Database was created with an older version. This table is used to keep track of the changes in our model. So we need to get it in our existing Database. Getting a Migration-History table into an existing database First thing we need to do to enable migrations in our existing application is to create our configuration class which will set up the MySqlClient Provider as our SQL Generator. So we have to add it with the following code: using System.Data.Entity.Migrations;     //add this at the top of your cs file public class Configuration : DbMigrationsConfiguration<NameOfYourDbContext>  //Make sure to use the name of your existing DBContext { public Configuration() { this.AutomaticMigrationsEnabled = false; //Set Automatic migrations to false since we'll be applying the migrations manually for this case. SetSqlGenerator("MySql.Data.MySqlClient", new MySql.Data.Entity.MySqlMigrationSqlGenerator());     }   }  This code will set up our configuration that we'll be using when executing all the migrations for our application. Once we have done this we can Build our application so we can check that everything is fine. Creating our Initial Migration Now let's add our Initial Migration. In Package Manager Console, execute "add-migration InitialCreate", you can use any other name but I like to set this as our initial create for future reference. After we run this command, some changes were done in our application: A new Migrations Folder was created. A new class migration call InitialCreate which in most of the cases should have empty Up and Down methods as long as your database is up to date with your Model. Since all your entities already exists, delete all duplicated code to create any entity which exists already in your Database if there is any. I found this easier when you don't have any pending updates to do to your database. Now we have our empty migration that will make no changes in our database and represents how are all the things at the begining of our migrations.  Finally, let's create our MigrationsHistory table. Optionally you can add SQL code to delete the edmdata table which is not needed anymore. public override void Up() { // Just make sure that you used 4.1 or later version         Sql("DROP TABLE EdmMetadata"); } From our Package Manager Console let's type: Update-database; If you like to see the operations made on each Update-database command you can use the flag -verbose after the Update-database. This will make two important changes.  It will execute the Up method in the initial migration which has no changes in the database. And second, and very important,  it will create the __MigrationHistory table necessary to keep track of your changes. And next time you make a change to your database it will compare the current model to the one stored in the Model Column of this table. Conclusion The important thing of this walk through is that we must create our initial migration before we start doing any changes to our model. This way we'll be adding the necessary __MigrationsHistory table to our existing database, so we can keep our database up to date with all the changes we do in our context model using migrations. Hope you have found this information useful. Please let us know if you have any questions or comments, also please check our forums here where we keep answering questions in general for the community.  Happy MySQL/Net Coding!

  Read the article

• Finding it Hard to Deliver Right Customer Experience: Think BPM!

  - by Ajay Khanna

  Our relationship with our customers is not a just a single interaction and we should not treat it like one. A customer’s relationship with a vendor is like a journey which starts way before customer makes a purchase and lasts long after that. The journey may start with customer researching a product that may lead to the eventual purchase and may continue with support or service needs for the product. A typical customer journey can be represented as shown below: As you may notice, customers tend to use multiple channels to interact with a company throughout their journey.  They also expect that they should get consistent experience, no matter what interaction channel they may choose. Customers do not like to repeat the information they have already provided and expect companies to remember their preferences, and offer them relevant products and services. If the company fails to meet this expectation, customers not only will abandon the purchase and go to the competitor but may also influence others’ purchase decision. Gone are the days when word of mouth was the only medium, and the customer could influence “Six” others. This is the age of social media and customer’s good or bad experience, especially bad get highly amplified and may influence hundreds of others. Challenges that face B2C companies today include: Delivering consistent experience: The reason that delivering consistent experience is challenging is due to fragmented data, disjointed systems and siloed multichannel interactions. Customers tend to get different service quality if they use web vs. phone vs. store. They get different responses from different service agents or get inconsistent answers if they call sales vs. service group in the company. Such inconsistent experiences result in lower customer satisfaction or NPS (net promoter score) numbers. Increasing Revenue: To stay competitive companies frequently introduce new products and services. Delay in launching such offerings has a significant impact on revenue realization. In addition to new product revenue, there are multiple opportunities to up-sell and cross-sell that impact bottom line. If companies are not able to identify such opportunities, bring a product to market quickly, or not offer the right product to the right customer at the right time, significant loss of revenue may occur. Ensuring Compliance: Companies must be compliant to ever changing regulations, these could be about Know Your Customer (KYC), Export/Import regulations, or taxation policies. In addition to government agencies, companies also need to comply with the SLA that they have committed to their customers. Lapse in meeting any of these requirements may lead to serious fines, penalties and loss in business. Companies have to make sure that they are in compliance will all such regulations and SLA commitments, at any given time. With the advent of social networks and mobile technology, companies not only need to focus on process efficiency but also on customer engagement. Improving engagement means delivering the customer experience as the customer is expecting and interacting with the customer at right time using right channel. Customers expect to be able to contact you via any channel of their choice (web, email, chat, mobile, social media), purchase via any viable channel (web, phone, store, mobile). Customers expect companies to understand their particular needs and remember their preferences on repeated visits. To deliver such an integrated, consistent, and contextual experience, power of BPM in must. Your company may be organized in departments like Marketing, Sales, Service. You may hold prospect data in SFA, order information in ERP, customer issues in CRM. However, the experience delivered to the customer must not be constrained by your system legacy. BPM helps in designing the right experience for the right customer and integrates all the underlining channels, systems, applications to make sure right information will be delivered to the right knowledge worker or to the customer every single time.     Orchestrating information across all systems (MDM, CRM, ERP), departments (commerce, merchandising, marketing service) and channels (Email, phone, web, social)  is the key, and that’s what BPM delivers. In addition to orchestrating systems and channels for consistency, BPM also provides an ability for analysis and decision management. By using data from historical transactions, social media and from other systems, users can determine the customer preferences, customer value, and churn propensity. This information, in the context, is then used while making a decision at a process step. Working with real-time decision management system can also suggest right up-sell or cross-sell offers, discounts or next-best-action steps for a particular customer. Timely action on customer issues or request is also a key tenet of a good customer experience. BPM’s complex event processing capabilities help companies to take proactive actions before issues get escalated. BPM system can be designed to listen to a certain event patters then deduce from those customer situations (credit card stolen, baggage lost, change of address) and do a triage before situation goes out of control. If such a situation arises you can send alerts to right people or immediately invoke corrective actions. Last but not least one of BPM’s key values is to drive continuous improvement. Learning about customers past experiences, interactions and social conversations, provide valuable insight. Such insight can be used to improve products, customer facing processes, and customer experience. You may take these insights as an input to design better more efficient and customer friendly sales, contact center or self-service processes. If customer experience is important for your business, make sure you have incorporated BPM as a part of your strategy to design, orchestrate and improve your customer facing processes.

  Read the article

• Oracle NoSQL Database Exceeds 1 Million Mixed YCSB Ops/Sec

  - by Charles Lamb

  We ran a set of YCSB performance tests on Oracle NoSQL Database using SSD cards and Intel Xeon E5-2690 CPUs with the goal of achieving 1M mixed ops/sec on a 95% read / 5% update workload. We used the standard YCSB parameters: 13 byte keys and 1KB data size (1,102 bytes after serialization). The maximum database size was 2 billion records, or approximately 2 TB of data. We sized the shards to ensure that this was not an "in-memory" test (i.e. the data portion of the B-Trees did not fit into memory). All updates were durable and used the "simple majority" replica ack policy, effectively 'committing to the network'. All read operations used the Consistency.NONE_REQUIRED parameter allowing reads to be performed on any replica. In the past we have achieved 100K ops/sec using SSD cards on a single shard cluster (replication factor 3) so for this test we used 10 shards on 15 Storage Nodes with each SN carrying 2 Rep Nodes and each RN assigned to its own SSD card. After correcting a scaling problem in YCSB, we blew past the 1M ops/sec mark with 8 shards and proceeded to hit 1.2M ops/sec with 10 shards.  Hardware Configuration We used 15 servers, each configured with two 335 GB SSD cards. We did not have homogeneous CPUs across all 15 servers available to us so 12 of the 15 were Xeon E5-2690, 2.9 GHz, 2 sockets, 32 threads, 193 GB RAM, and the other 3 were Xeon E5-2680, 2.7 GHz, 2 sockets, 32 threads, 193 GB RAM.  There might have been some upside in having all 15 machines configured with the faster CPU, but since CPU was not the limiting factor we don't believe the improvement would be significant. The client machines were Xeon X5670, 2.93 GHz, 2 sockets, 24 threads, 96 GB RAM. Although the clients had 96 GB of RAM, neither the NoSQL Database or YCSB clients require anywhere near that amount of memory and the test could have just easily been run with much less. Networking was all 10GigE. YCSB Scaling Problem We made three modifications to the YCSB benchmark. The first was to allow the test to accommodate more than 2 billion records (effectively int's vs long's). To keep the key size constant, we changed the code to use base 32 for the user ids. The second change involved to the way we run the YCSB client in order to make the test itself horizontally scalable.The basic problem has to do with the way the YCSB test creates its Zipfian distribution of keys which is intended to model "real" loads by generating clusters of key collisions. Unfortunately, the percentage of collisions on the most contentious keys remains the same even as the number of keys in the database increases. As we scale up the load, the number of collisions on those keys increases as well, eventually exceeding the capacity of the single server used for a given key.This is not a workload that is realistic or amenable to horizontal scaling. YCSB does provide alternate key distribution algorithms so this is not a shortcoming of YCSB in general. We decided that a better model would be for the key collisions to be limited to a given YCSB client process. That way, as additional YCSB client processes (i.e. additional load) are added, they each maintain the same number of collisions they encounter themselves, but do not increase the number of collisions on a single key in the entire store. We added client processes proportionally to the number of records in the database (and therefore the number of shards). This change to the use of YCSB better models a use case where new groups of users are likely to access either just their own entries, or entries within their own subgroups, rather than all users showing the same interest in a single global collection of keys. If an application finds every user having the same likelihood of wanting to modify a single global key, that application has no real hope of getting horizontal scaling. Finally, we used read/modify/write (also known as "Compare And Set") style updates during the mixed phase. This uses versioned operations to make sure that no updates are lost. This mode of operation provides better application behavior than the way we have typically run YCSB in the past, and is only practical at scale because we eliminated the shared key collision hotspots.It is also a more realistic testing scenario. To reiterate, all updates used a simple majority replica ack policy making them durable. Scalability Results In the table below, the "KVS Size" column is the number of records with the number of shards and the replication factor. Hence, the first row indicates 400m total records in the NoSQL Database (KV Store), 2 shards, and a replication factor of 3. The "Clients" column indicates the number of YCSB client processes. "Threads" is the number of threads per process with the total number of threads. Hence, 90 threads per YCSB process for a total of 360 threads. The client processes were distributed across 10 client machines. Shards KVS Size Clients Mixed (records) Threads OverallThroughput(ops/sec) Read Latencyav/95%/99%(ms) Write Latencyav/95%/99%(ms) 2 400m(2x3) 4 90(360) 302,152 0.76/1/3 3.08/8/35 4 800m(4x3) 8 90(720) 558,569 0.79/1/4 3.82/16/45 8 1600m(8x3) 16 90(1440) 1,028,868 0.85/2/5 4.29/21/51 10 2000m(10x3) 20 90(1800) 1,244,550 0.88/2/6 4.47/23/53

  Read the article

• Where would a spam bot be located?

  - by Tim

  I have a hosted website using a free hosting service, I received an email this afternoon saying that I have been suspended because my account has been compromised. Basically, someone is using my email account to mass send spam. I've changed all the passwords and everything but when my Gmail pulls the emails from the host it's still downloading loads of spam messages that show like this: This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: [email protected] SMTP error from remote mail server after end of data: host 198.91.80.251 [198.91.80.251]: 554 5.6.0 id=23634-03 - Rejected by MTA on relaying, from MTA([127.0.0.1]:10030): 554 Error: This email address has lost rights to send email from the system ------ This is a copy of the message, including all the headers. ------ Return-path: <[email protected]> Received: from keenesystems.com ([66.135.33.211]:2370 helo=server211) by absolut.x10hosting.com with esmtpsa (TLSv1:RC4-MD5:128) (Exim 4.77) (envelope-from <[email protected]>) id 1TGwSW-002hHe-Lc for [email protected]; Wed, 26 Sep 2012 13:35:44 -0500 MIME-Version: 1.0 Date: Wed, 26 Sep 2012 13:35:43 -0500 X-Priority: 3 (Normal) X-Mailer: Ximian Evolution 3.9.9 (8.5.3-6) Subject: New staff members wanted at Auction It Online From: [email protected] Reply-To: [email protected] To: "Nadia Monti" <[email protected]> Content-Type: text/plain Content-Transfer-Encoding: quoted-printable Message-ID: <OUTLOOK-IDM-9aed7054-6a3e-e1a4-1d5c-3e73377652a6@server211> Date : 26 September 2012=0ATime : 13:35=0ASender : Dennise Halcomb Head = Office Manager of RJ Auction Drop-Off Int.=0A=0ANice to meet you Nadia M= onti=0A=0ARJ ADO Ltd., a USA based company, offers a significant amount = of goods worldwide for our customers on eBay and other auction venues. = Our company's main target is to provide a suitable and cost-effective se= rvice for any person, company or fundraising company. The main purpose o= f the administrative assistant / sales support representative is to cont= ribute to the sales force and add convenience to our cost-effective serv= ice dedicated to individuals, businesses, and organizations worldwide. O= ur HR department obtained your resume from one of the various job-orient= ed websites just to offer you this post.=0A=0AWorking Schedule: This is = a part time and home-based offer. You won't need to spend more than 3 ho= urs each day. Your =0Aschedule will be flexible.=0A=0ASalary: At the end= of the trial period (it lasts for 1 month) you will be paid 1,800 EUR. = With the average volume of clients your overall income will raise up to = 3,000 EUR per month. After the trial period is over your base salary wil= l grow up to 2,500 EUR per month, so you will earn 5% commission from th= e transactions completed.=0A=0AWhere?: Italy Wide. As it is a stay at ho= me position all the communication will be carried out via email and via = phone.=0A=0ARequirements: Access to the internet during the workday and = basic microsoft office skills are needed. Basic knowledge of English is = required (most of the contacts will be in English).=0A=0ACosts and Fees:= There are NO costs at any time for our employees. All fees related to t= his position are covered by the RJ ADO Co. Ltd..=0A=0AFurther Hiring Pro= cess: If you are interested in position we offer, please reply to this e= mail and send us the copy of your resume for verification.=0A=0AAfter re= viewing all of the received applications we will reply to successful app= licants only. Then we'll offer to these successful applicants a position= within our firm on a trial period basis for one month beginning from th= e date you sign a trial agreement. During this trial period you will rec= eive full guidance and support. Employees on a one monthly trial period = are evaluated at least one week prior to the end of their trial. During = the trial, your supervisor can recommend termination. At the end of the = trial period, the supervisor can offer continued employment, extension o= f trial period, or termination. After the trial period you may ask for m= ore hours or continue full-time.=0A=0AIf you are interested in this posi= tion, just reply to this email and send any questions you have and the c= opy of your resume for verification.=0A=0AThank You,=0AHR-Manager of RJ = ADO Co. Ltd.=0A=0APermission Settings=0AYou have been referred to RJ Auc= tion Drop-Off If you feel you received this email in error or do not wis= h to receive future messages, please reply to this message with "remove"= in the subject field. We will immediately update our database according= ly. =0AWe apologize for any inconvenience caused.=0A=0ARJ Auction Drop-O= ff Co. Ltd. I'm not aware of how this has happened. I'm not sure how anyone could have got hold of my password. It's a simple wordpress install, at some point recently my host went down and there was a fresh install of wordpress with default admin accounts, I have a feeling it could be something to do with this. My question is, even though I've changed all my passwords it's all still happening, is there annywhere in paticular this script would be stored on my host. I really can't deal with having my hosting account suspended and my email account sending all this spam.

  Read the article

• Rebuilding CoasterBuzz, Part II: Hot data objects

  - by Jeff

  This is the second post, originally from my personal blog, in a series about rebuilding one of my Web sites, which has been around for 12 years. More: Part I: Evolution, and death to WCF After the rush to get moving on stuff, I temporarily lost interest. I went almost two weeks without touching the project, in part because the next thing on my backlog was doing up a bunch of administrative pages. So boring. Unfortunately, because most of the site's content is user-generated, you need some facilities for editing data. CoasterBuzz has a database full of amusement parks and roller coasters. The entities enjoy the relationships that you would expect, though they're further defined by "instances" of a coaster, to define one that has moved between parks as one, with different names and operational dates. And of course, there are pictures and news items, too. It's not horribly complex, except when you have to account for a name change and display just the newest name. In all previous versions, data access was straight SQL. As so much of the old code was rooted in 2003, with some changes in 2008, there wasn't much in the way of ORM frameworks going on then. Let me rephrase that, I mostly wasn't interested in ORM's. Since that time, I used a little LINQ to SQL in some projects, and a whole bunch of nHibernate while at Microsoft. Through all of that experience, I have to admit that these frameworks are often a bigger pain in the ass than not. They're great for basic crud operations, but when you start having all kinds of exotic relationships, they get difficult, and generate all kinds of weird SQL under the covers. The black box can quickly turn into a black hole. Sometimes you end up having to build all kinds of new expertise to do things "right" with a framework. Still, despite my reservations, I used the newer version of Entity Framework, with the "code first" modeling, in a science project and I really liked it. Since it's just a right-click away with NuGet, I figured I'd give it a shot here. My initial effort was spent defining the context class, which requires a bit of work because I deviate quite a bit from the conventions that EF uses, starting with table names. Then throw some partial querying of certain tables (where you'll find image data), and you're splitting tables across several objects (navigation properties). I won't go into the details, because these are all things that are well documented around the Internet, but there was a minor learning curve there. The basics of reading data using EF are fantastic. For example, a roller coaster object has a park associated with it, as well as a number of instances (if it was ever relocated), and there also might be a big banner image for it. This is stupid easy to use because it takes one line of code in your repository class, and by the time you pass it to the view, you have a rich object graph that has everything you need to display stuff. Likewise, editing simple data is also, well, simple. For this goodness, thank the ASP.NET MVC framework. The UpdateModel() method on the controllers is very elegant. Remember the old days of assigning all kinds of properties to objects in your Webforms code-behind? What a time consuming mess that used to be. Even if you're not using an ORM tool, having hydrated objects come off the wire is such a time saver. Not everything is easy, though. When you have to persist a complex graph of objects, particularly if they were composed in the user interface with all kinds of AJAX elements and list boxes, it's not just a simple matter of submitting the form. There were a few instances where I ended up going back to "old-fashioned" SQL just in the interest of time. It's not that I couldn't do what I needed with EF, it's just that the efficiency, both my own and that of the generated SQL, wasn't good. Since EF context objects expose a database connection object, you can use that to do the old school ADO.NET stuff you've done for a decade. Using various extension methods from POP Forums' data project, it was a breeze. You just have to stick to your decision, in this case. When you start messing with SQL directly, you can't go back in the same code to messing with entities because EF doesn't know what you're changing. Not really a big deal. There are a number of take-aways from using EF. The first is that you write a lot less code, which has always been a desired outcome of ORM's. The other lesson, and I particularly learned this the hard way working on the MSDN forums back in the day, is that trying to retrofit an ORM framework into an existing schema isn't fun at all. The CoasterBuzz database isn't bad, but there are design decisions I'd make differently if I were starting from scratch. Now that I have some of this stuff done, I feel like I can start to move on to the more interesting things on the backlog. There's a lot to do, but at least it's fun stuff, and not more forms that will be used infrequently.

  Read the article

• Rebuilding CoasterBuzz, Part IV: Dependency injection, it's what's for breakfast

  - by Jeff

  (Repost from my personal blog.) This is another post in a series about rebuilding one of my Web sites, which has been around for 12 years. I hope to relaunch soon. More: Part I: Evolution, and death to WCF Part II: Hot data objects Part III: The architecture using the "Web stack of love" If anything generally good for the craft has come out of the rise of ASP.NET MVC, it's that people are more likely to use dependency injection, and loosely couple the pieces parts of their applications. A lot of the emphasis on coding this way has been to facilitate unit testing, and that's awesome. Unit testing makes me feel a lot less like a hack, and a lot more confident in what I'm doing. Dependency injection is pretty straight forward. It says, "Given an instance of this class, I need instances of other classes, defined not by their concrete implementations, but their interfaces." Probably the first place a developer exercises this in when having a class talk to some kind of data repository. For a very simple example, pretend the FooService has to get some Foo. It looks like this: public class FooService {    public FooService(IFooRepository fooRepo)    {       _fooRepo = fooRepo;    }    private readonly IFooRepository _fooRepo;    public Foo GetMeFoo()    {       return _fooRepo.FooFromDatabase();    } } When we need the FooService, we ask the dependency container to get it for us. It says, "You'll need an IFooRepository in that, so let me see what that's mapped to, and put it in there for you." Why is this good for you? It's good because your FooService doesn't know or care about how you get some foo. You can stub out what the methods and properties on a fake IFooRepository might return, and test just the FooService. I don't want to get too far into unit testing, but it's the most commonly cited reason to use DI containers in MVC. What I wanted to mention is how there's another benefit in a project like mine, where I have to glue together a bunch of stuff. For example, when I have someone sign up for a new account on CoasterBuzz, I'm actually using POP Forums' new account mailer, which composes a bunch of text that includes a link to verify your account. The thing is, I want to use custom text and some other logic that's specific to CoasterBuzz. To accomplish this, I make a new class that inherits from the forum's NewAccountMailer, and override some stuff. Easy enough. Then I use Ninject, the DI container I'm using, to unbind the forum's implementation, and substitute my own. Ninject uses something called a NinjectModule to bind interfaces to concrete implementations. The forum has its own module, and then the CoasterBuzz module is loaded second. The CB module has two lines of code to swap out the mailer implementation: Unbind<PopForums.Email.INewAccountMailer>(); Bind<PopForums.Email.INewAccountMailer>().To<CbNewAccountMailer>(); Piece of cake! Now, when code asks the DI container for an INewAccountMailer, it gets my custom implementation instead. This is a lot easier to deal with than some of the alternatives. I could do some copy-paste, but then I'm not using well-tested code from the forum. I could write stuff from scratch, but then I'm throwing away a bunch of logic I've already written (in this case, stuff around e-mail, e-mail settings, mail delivery failures). There are other places where the DI container comes in handy. For example, CoasterBuzz does a number of custom things with user profiles, and special content for paid members. It uses the forum as the core piece to managing users, so I can ask the container to get me instances of classes that do user lookups, for example, and have zero care about how the forum handles database calls, configuration, etc. What a great world to live in, compared to ten years ago. Sure, the primary interest in DI is around the "separation of concerns" and facilitating unit testing, but as your library grows and you use more open source, it starts to be the glue that pulls everything together.

  Read the article

• Using Definition of Done to Drive Agile Maturity

  - by Dylan Smith

  I’ve been an Agile Coach at a lot of different clients over the years, and I want to share an approach I use to help them adopt and mature over time. It’s important to realize that “Agile” is not a black/white yes/no thing. Teams can be varying degrees of agile. I think of this as their agile maturity level. When I coach teams I want them to start out being a little agile, and get more agile as they mature. The approach I teach them is to use the definition of done as a technique to continuously improve their agile maturity over time. We’re probably all familiar with the concept of “Done Done” that represents what *actually* being done a feature means. Not just when a developer says he’s done right after he writes that last line of code that makes the feature kind-of work. Done Done means the coding is done, it’s been tested, installers and deployment packages have been created, user manuals have been updated, architecture docs have been updated, etc. To enable teams to internalize the concept of “Done Done”, they usually get together and come up with their Definition of Done (DoD) that defines all the activities that need to be completed before a feature is considered Done Done. The Done Done technique typically is applied only to features (aka User Stories). What I do is extend this to apply to several concepts such as User Stories, Sprints, Releases (and sometimes Check-Ins). During project kick-off I’ll usually sit down with the team and go through an exercise of creating DoD’s for each of these concepts (Stories/Sprints/Releases). We’ll usually start by just brainstorming a bunch of activities that could end up in these various DoD’s. Here’s some examples: Code Reviews StyleCop FxCop User Manuals Updated Architecture Docs Updated Tested by QA Tested by UAT Installers Created Support Knowledge Base Updated Deployment Instructions (for Ops) written Automated Unit Tests Run Automated Integration Tests Run Then we start by arranging these activities into the place they occur today (e.g. Do you do UAT testing only once per release? every sprint? every feature?). If the team was previously Waterfall most of these activities probably end up in the Release DoD. An extremely mature agile team would probably have most of these activities in the DoD for the User Stories (because an extremely mature agile team will probably do continuous deployment and release every story). So what we need to do as a team, is work to move these activities from their current home (Release DoD) down into the Sprint DoD and eventually into the User Story DoD (and maybe into the lower-level Check-In DoD if we decide to use that). We don’t have to move them all down to User Story immediately, but as a team we figure out what we think we’re capable of moving down to the Sprint cycle, and Story cycle immediately, and that becomes our starting DoD’s. Over time the team makes an effort to continue moving activities down from Release->Sprint->Story as they become more agile and more mature. I try to encourage them to envision a world in which they deploy to production as each User Story is completed. They would need to be updating User Manuals, creating installers, doing UAT testing (typical Release cycle activities) on every single User Story. They may never actually reach that point, but they should envision that, and strive to keep driving the activities down closer to the User Story cycle s they mature. This is a great technique to give a team an easy-to-follow roadmap to mature their agile practices over time. Sure there’s other aspects to maturity outside of this, but it’s a great technique, that’s easy to visualize, to drive agility into the team. Just keep moving those activities (aka “gates”) down the board from Release->Sprint->Story. I’ll try to give an example of what a recent client of mine had for their DoD’s (this is from memory, so probably not 100% accurate): Release Create/Update deployment Instructions For Ops Instructional Videos Updated Run manual regression test suite UAT Testing In this case that meant deploying to an environment shared across the enterprise that mirrored production and asking other business groups to test their own apps to ensure we didn’t break anything outside our system Sprint Deploy to UAT Environment But not necessarily actually request UAT testing occur User Guides updated Sprint Features Video Created In this case we decided to create a video each sprint showing off the progress (video version of Sprint Demo) User Story Manual Test scripts developed and run Tested by BA Deployed in shared QA environment Using automated deployment process Peer Code Review Code Check-In Compiled (warning-free) Passes StyleCop Passes FxCop Create installer packages Run Automated Tests Run Automated Integration Tests PS – One of my clients had a great question when we went through this activity. They said that if a Sprint is by definition done when the end-date rolls around (time-boxed), isn’t a DoD on a sprint meaningless – it’s done on the end-date regardless of whether those other activities are complete or not? My answer is that while that statement is true – the sprint is done regardless when the end date rolls around – if the DoD activities haven’t been completed I would consider the Sprint a failure (similar to not completing what was committed/planned – failure may be too strong a word but you get the idea). In the Retrospective that will become an agenda item to discuss and understand why we weren’t able to complete the activities we agreed would need to be completed each Sprint.

  Read the article

• Business Case for investing time developing Stubs and BizUnit Tests

  - by charlie.mott

  I was recently in a position where I had to justify why effort should be spent developing Stubbed Integration Tests for BizTalk solutions. These tests are usually developed using the BizUnit framework. I assumed that most seasoned BizTalk developers would consider this best practice. Even though Microsoft suggest use of BizUnit on MSDN, I've not found a single site listing the justifications for investing time writing stubs and BizUnit tests. Stubs Stubs should be developed to isolate your development team from external dependencies. This is described by Michael Stephenson here. Failing to do this can result in the following problems: In contract-first scenarios, the external system interface will have been defined.  But the interface may not have been setup or even developed yet for the BizTalk developers to work with. By the time you open the target location to see the data BizTalk has sent, it may have been swept away. If you are relying on the UI of the target system to see the data BizTalk has sent, what do you do if it fails to arrive? It may take time for the data to be processed or it may be scheduled to be processed later. Learning how to use the source\target systems and investigations into where things go wrong in these systems will slow down the BizTalk development effort. By the time the data is visible in a UI it may have undergone further transformations. In larger development teams working together, do you all use the same source and target instances. How do you know which data was created by whose tests? How do you know which event log error message are whose?  Another developer may have “cleaned up” your data. It is harder to write BizUnit tests that clean up the data\logs after each test run. What if your B2B partners' source or target system cannot support the sort of testing you want to do. They may not even have a development or test instance that you can work with. Their single test instance may be used by the SIT\UAT teams. There may be licencing costs of setting up an instances of the external system. The stubs I like to use are generic stubs that can accept\return any message type.  Usually I need to create one per protocol. They should be driven by BizUnit steps to: validates the data received; and select a response messages (or error response). Once built, they can be re-used for many integration tests and from project to project. I’m not saying that developers should never test against a real instance.  Every so often, you still need to connect to real developer or test instances of the source and target endpoints\services. The interface developers may ask you to send them some data to see if everything still works.  Or you might want some messages sent to BizTalk to get confidence that everything still works beyond BizTalk. Tests Automated “Stubbed Integration Tests” are usually built using the BizUnit framework. These facilitate testing of the entire integration process from source stub to target stub. It will ensure that all of the BizTalk components are configured together correctly to meet all the requirements. More fine grained unit testing of individual BizTalk components is still encouraged.  But BizUnit provides much the easiest way to test some components types (e.g. Orchestrations). Using BizUnit with the Behaviour Driven Development approach described by Mike Stephenson delivers the following benefits: source: http://biztalkbddsample.codeplex.com – Video 1. Requirements can be easily defined using Given/When/Then Requirements are close to the code so easier to manage as features and scenarios Requirements are defined in domain language The feature files can be used as part of the documentation The documentation is accurate to the build of code and can be published with a release The scenarios are effective to document the scenarios and are not over excessive The scenarios are maintained with the code There’s an abstraction between the intention and implementation of tests making them easier to understand The requirements drive the testing These same tests can also be used to drive load testing as described here. If you don't do this ... If you don't follow the above “Stubbed Integration Tests” approach, the developer will need to manually trigger the tests. This has the following risks: Developers are unlikely to check all the scenarios each time and all the expected conditions each time. After the developer leaves, these manual test steps may be lost. What test scenarios are there?  What test messages did they use for each scenario? There is no mechanism to prove adequate test coverage. A test team may attempt to automate integration test scenarios in a test environment through the triggering of tests from a source system UI. If this is a replacement for BizUnit tests, then this carries the following risks: It moves the tests downstream, so problems will be found later in the process. Testers may not check all the expected conditions within the BizTalk infrastructure such as: event logs, suspended messages, etc. These automated tests may also get in the way of manual tests run on these environments.

  Read the article

• High Availability for IaaS, PaaS and SaaS in the Cloud

  - by BuckWoody

  Outages, natural disasters and unforeseen events have proved that even in a distributed architecture, you need to plan for High Availability (HA). In this entry I'll explain a few considerations for HA within Infrastructure-as-a-Service (IaaS), Platform-as-a-Service (PaaS) and Software-as-a-Service (SaaS). In a separate post I'll talk more about Disaster Recovery (DR), since each paradigm has a different way to handle that. Planning for HA in IaaS IaaS involves Virtual Machines - so in effect, an HA strategy here takes on many of the same characteristics as it would on-premises. The primary difference is that the vendor controls the hardware, so you need to verify what they do for things like local redundancy and so on from the hardware perspective. As far as what you can control and plan for, the primary factors fall into three areas: multiple instances, geographical dispersion and task-switching. In almost every cloud vendor I've studied, to ensure your application will be protected by any level of HA, you need to have at least two of the Instances (VM's) running. This makes sense, but you might assume that the vendor just takes care of that for you - they don't. If a single VM goes down (for whatever reason) then the access to it is lost. Depending on multiple factors, you might be able to recover the data, but you should assume that you can't. You should keep a sync to another location (perhaps the vendor's storage system in another geographic datacenter or to a local location) to ensure you can continue to serve your clients. You'll also need to host the same VM's in another geographical location. Everything from a vendor outage to a network path problem could prevent your users from reaching the system, so you need to have multiple locations to handle this. This means that you'll have to figure out how to manage state between the geo's. If the system goes down in the middle of a transaction, you need to figure out what part of the process the system was in, and then re-create or transfer that state to the second set of systems. If you didn't write the software yourself, this is non-trivial. You'll also need a manual or automatic process to detect the failure and re-route the traffic to your secondary location. You could flip a DNS entry (if your application can tolerate that) or invoke another process to alias the first system to the second, such as load-balancing and so on. There are many options, but all of them involve coding the state into the application layer. If you've simply moved a state-ful application to VM's, you may not be able to easily implement an HA solution. Planning for HA in PaaS Implementing HA in PaaS is a bit simpler, since it's built on the concept of stateless applications deployment. Once again, you need at least two copies of each element in the solution (web roles, worker roles, etc.) to remain available in a single datacenter. Also, you need to deploy the application again in a separate geo, but the advantage here is that you could work out a "shared storage" model such that state is auto-balanced across the world. In fact, you don't have to maintain a "DR" site, the alternate location can be live and serving clients, and only take on extra load if the other site is not available. In Windows Azure, you can use the Traffic Manager service top route the requests as a type of auto balancer. Even with these benefits, I recommend a second backup of storage in another geographic location. Storage is inexpensive; and that second copy can be used for not only HA but DR. Planning for HA in SaaS In Software-as-a-Service (such as Office 365, or Hadoop in Windows Azure) You have far less control over the HA solution, although you still maintain the responsibility to ensure you have it. Since each SaaS is different, check with the vendor on the solution for HA - and make sure you understand what they do and what you are responsible for. They may have no HA for that solution, or pin it to a particular geo, or perhaps they have a massive HA built in with automatic load balancing (which is often the case).   All of these options (with the exception of SaaS) involve higher costs for the design. Do not sacrifice reliability for cost - that will always cost you more in the end. Build in the redundancy and HA at the very outset of the project - if you try to tack it on later in the process the business will push back and potentially not implement HA. References: http://www.bing.com/search?q=windows+azure+High+Availability  (each type of implementation is different, so I'm routing you to a search on the topic - look for the "Patterns and Practices" results for the area in Azure you're interested in)

  Read the article

• A Knights Tale

  - by Phil Factor

  There are so many lessons to be learned from the story of Knight Capital losing nearly half a billion dollars as a result of a deployment gone wrong. The Knight Capital Group (KCG N) was an American global financial services firm engaging in market making, electronic execution, and institutional sales and trading. According to the recent order (File No.3.15570) against Knight Capital by U.S. Securities and Exchange Commission?, Knight had, for many years used some software which broke up incoming “parent” orders into smaller “child” orders that were then transmitted to various exchanges or trading venues for execution. A tracking ‘cumulative quantity’ function counted the number of ‘child’ orders and stopped the process once the total of child orders matched the ‘parent’ and so the parent order had been completed. Back in the mists of time, some code had been added to it  which was excuted if a particular flag was set. It was called ‘power peg’ and seems to have had a similar design and purpose, but, one guesses, would have shared the same tracking function. This code had been abandoned in 2003, but never deleted. In 2005, The tracking function was moved to an earlier point in the main process. It would seem from the account that, from that point, had that flag ever been set, the old ‘Power Peg’ would have been executed like Godzilla bursting from the ice, making child orders without limit without any tracking function. It wasn’t, presumably because the software that set the flag was removed. In 2012, nearly a decade after ‘Power Peg’ was abandoned, Knight prepared a new module to their software to cope with the imminent Retail Liquidity Program (RLP) for the New York Stock Exchange. By this time, the flag had remained unused and someone made the fateful decision to reuse it, and replace the old ‘power peg’ code with this new RLP code. Had the two actions been done together in a single automated deployment, and the new deployment tested, all would have been well. It wasn’t. To quote… “Beginning on July 27, 2012, Knight deployed the new RLP code in SMARS in stages by placing it on a limited number of servers in SMARS on successive days. During the deployment of the new code, however, one of Knight’s technicians did not copy the new code to one of the eight SMARS computer servers. Knight did not have a second technician review this deployment and no one at Knight realized that the Power Peg code had not been removed from the eighth server, nor the new RLP code added. Knight had no written procedures that required such a review.” (para 15) “On August 1, Knight received orders from broker-dealers whose customers were eligible to participate in the RLP. The seven servers that received the new code processed these orders correctly. However, orders sent with the repurposed flag to the eighth server triggered the defective Power Peg code still present on that server. As a result, this server began sending child orders to certain trading centers for execution. Because the cumulative quantity function had been moved, this server continuously sent child orders, in rapid sequence, for each incoming parent order without regard to the number of share executions Knight had already received from trading centers. Although one part of Knight’s order handling system recognized that the parent orders had been filled, this information was not communicated to SMARS.” (para 16) SMARS routed millions of orders into the market over a 45-minute period, and obtained over 4 million executions in 154 stocks for more than 397 million shares. By the time that Knight stopped sending the orders, Knight had assumed a net long position in 80 stocks of approximately $3.5 billion and a net short position in 74 stocks of approximately $3.15 billion. Knight’s shares dropped more than 20% after traders saw extreme volume spikes in a number of stocks, including preferred shares of Wells Fargo (JWF) and semiconductor company Spansion (CODE). Both stocks, which see roughly 100,000 trade per day, had changed hands more than 4 million times by late morning. Ultimately, Knight lost over $460 million from this wild 45 minutes of trading. Obviously, I’m interested in all this because, at one time, I used to write trading systems for the City of London. Obviously, the US SEC is in a far better position than any of us to work out the failings of Knight’s IT department, and the report makes for painful reading. I can’t help observing, though, that even with the breathtaking mistakes all along the way, that a robust automated deployment process that was ‘all-or-nothing’, and tested from soup to nuts would have prevented the disaster. The report reads like a Greek Tragedy. All the way along one wants to shout ‘No! not that way!’ and ‘Aargh! Don’t do it!’. As the tragedy unfolds, the audience weeps for the players, trapped by a cruel fate. All application development and deployment requires defense in depth. All IT goes wrong occasionally, but if there is a culture of defensive programming throughout, the consequences are usually containable. For financial systems, these defenses are required by statute, and ignored only by the foolish. Knight’s mistakes weren’t made by just one hapless sysadmin, but were progressive errors by an  IT culture spanning at least ten years.  One can spell these out, but I think they’re obvious. One can only hope that the industry studies what happened in detail, learns from the mistakes, and draws the right conclusions.

  Read the article

• Right-Time Retail Part 2

  - by David Dorf

  This is part two of the three-part series. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Right-Time Integration Of course these real-time enabling technologies are only as good as the systems that utilize them, and it only takes one bottleneck to slow everyone else down. What good is an immediate stock-out notification if the supply chain can’t react until tomorrow? Since being formed in 2006, Oracle Retail has been not only adding more integrations between systems, but also modernizing integrations for appropriate speed. Notice I tossed in the word “appropriate.” Not everything needs to be real-time – again, we’re talking about Right-Time Retail. The speed of data capture, analysis, and execution must be synchronized or you’re wasting effort. Unfortunately, there isn’t an enterprise-wide dial that you can crank-up for your estate. You’ll need to improve things piecemeal, with people and processes as limiting factors while choosing the appropriate types of integrations. There are three integration styles we see in the retail industry. First is batch. I know, the word “batch” just sounds slow, but this pattern is less about velocity and more about volume. When there are large amounts of data to be moved, you’ll want to use batch processes. Our technology of choice here is Oracle Data Integrator (ODI), which provides a fast version of Extract-Transform-Load (ETL). Instead of the three-step process, the load and transform steps are combined to save time. ODI is a key technology for moving data into Retail Analytics where we can apply science. Performing analytics on each sale as it occurs doesn’t make any sense, so we batch up a statistically significant amount and submit all at once. The second style is fire-and-forget. For some types of data, we want the data to arrive ASAP but immediacy is not necessary. Speed is less important than guaranteed delivery, so we use message-oriented middleware available in both Weblogic and the Oracle database. For example, Point-of-Service transactions are queued for delivery to Central Office at corporate. If the network is offline, those transactions remain in the queue and will be delivered when the network returns. Transactions cannot be lost and they must be delivered in order. (Ever tried processing a return before the sale?) To enhance the standard queues, we offer the Retail Integration Bus (RIB) to help the management and monitoring of fire-and-forget messaging in the enterprise. The third style is request-response and is most commonly implemented as Web services. This is a synchronous message where the sender waits for a response. In this situation, the volume of data is small, guaranteed delivery is not necessary, but speed is very important. Examples include the website checking inventory, a price lookup, or processing a credit card authorization. The Oracle Service Bus (OSB) typically handles the routing of such messages, and we’ve enhanced its abilities with the Retail Service Backbone (RSB). To better understand these integration patterns and where they apply within the retail enterprise, we’re providing the Retail Reference Library (RRL) at no charge to Oracle Retail customers. The library is composed of a large number of industry business processes, including those necessary to support Commerce Anywhere, as well as detailed architectural diagrams. These diagrams allow implementers to understand the systems involved in integrations and the specific data payloads. Furthermore, with our upcoming release we’ll be providing a new tool called the Retail Integration Console (RIC) that allows IT to monitor and manage integrations from a single point. Using RIC, retailers can quickly discern where integration activity is occurring, volume statistics, average response times, and errors. The dashboards provide the ability to dive down into the architecture documentation to gather information all the way down to the specific payload. Retailers that want real-time integrations will also need real-time monitoring of those integrations to ensure service-level agreements are maintained. Part 3 looks at marketing.

  Read the article

• My rhythm game runs choppy even with high frame rate

  - by felipedrl

  I'm coding a rhythm game and the game runs smoothly with uncapped fps. But when I try to cap it around 60 the game updates in little chunks, like hiccups, as if it was skipping frames or at a very low frame rate. The reason I need to cap frame rate is because in some computers I tested, the fps varies a lot (from ~80 - ~250 fps) and those drops are noticeable and degrade response time. Since this is a rhythm game this is very important. This issue is driving me crazy. I've spent a few weeks already on it and still can't figure out the problem. I hope someone more experienced than me could shed some light on it. I'll try to put here all the hints I've tried along with two pseudo codes for game loops I tried, so I apologize if this post gets too lengthy. 1st GameLoop: const uint UPDATE_SKIP = 1000 / 60; uint nextGameTick = SDL_GetTicks(); while(isNotDone) { // only false when a QUIT event is generated! if (processEvents()) { if (SDL_GetTicks() > nextGameTick) { update(UPDATE_SKIP); render(); nextGameTick += UPDATE_SKIP; } } } 2nd Game Loop: const uint UPDATE_SKIP = 1000 / 60; while (isNotDone) { LARGE_INTEGER startTime; QueryPerformanceCounter(&startTime); // process events will return false in case of a QUIT event processed if (processEvents()) { update(frameTime); render(); } LARGE_INTEGER endTime; do { QueryPerformanceCounter(&endTime); frameTime = static_cast<uint>((endTime.QuadPart - startTime.QuadPart) * 1000.0 / frequency.QuadPart); } while (frameTime < UPDATE_SKIP); } [1] At first I thought it was a timer resolution problem. I was using SDL_GetTicks, but even when I switched to QueryPerformanceCounter, supposedly less granular, I saw no difference. [2] Then I thought it could be due to a rounding error in my position computation and since game updates are smaller in high FPS that would be less noticeable. Indeed there is an small error, but from my tests I realized that it is not enough to produce the position jumps I'm getting. Also, another intriguing factor is that if I enable vsync I'll get smooth updates @60fps regardless frame cap code. So why not rely on vsync? Because some computers can force a disable on gfx card config. [3] I started printing the maximum and minimum frame time measured in 1sec span, in the hope that every a few frames one would take a long time but still not enough to drop my fps computation. It turns out that, with frame cap code I always get frame times in the range of [16, 18]ms, and still, the game "does not moves like jagger". [4] My process' priority is set to HIGH (Windows doesn't allow me to set REALTIME for some reason). As far as I know there is only one thread running along with the game (a sound callback, which I really don't have access to it). I'm using AudiereLib. I then disabled Audiere by removing it from the project and still got the issue. Maybe there are some others threads running and one of them is taking too long to come back right in between when I measured frame times, I don't know. Is there a way to know which threads are attached to my process? [5] There are some dynamic data being created during game run. But It is a little bit hard to remove it to test. Maybe I'll have to try harder this one. Well, as I told you I really don't know what to try next. Anything, I mean, anything would be of great help. What bugs me more is why at 60fps & vsync enabled I get an smooth update and at 60fps & no vsync I don't. Is there a way to implement software vsync? I mean, query display sync info? Thanks in advance. I appreciate the ones that got this far and yet again I apologize for the long post. Best Regards from a fellow coder.

  Read the article

• Understanding the 'High Performance' meaning in Extreme Transaction Processing

  - by kyap

  Despite my previous blogs entries on SOA/BPM and Identity Management, the domain where I'm the most passionated is definitely the Extreme Transaction Processing, commonly called XTP.I came across XTP back to 2007 while I was still FMW Product Manager in EMEA. At that time Oracle acquired a company called Tangosol, which owned an unique product called Coherence that we renamed to Oracle Coherence. Beside this innovative renaming of the product, to be honest, I didn't know much about it, except being a "distributed in-memory cache for Extreme Transaction Processing"... not very helpful still.In general when people doesn't fully understand a technology or a concept, they tend to find some shortcuts, either correct or not, to justify their lack-of understanding... and of course I was part of this category of individuals. And the shortcut was "Oracle Coherence Cache helps to improve Performance". Excellent marketing slogan... but not very meaningful still. By chance I was able to get away quickly from that group in July 2007* at Thames Valley Park (UK), after I attended one of the most interesting workshops, in my 10 years career in Oracle, delivered by Brian Oliver. The biggest mistake I made was to assume that performance improvement with Coherence was related to the response time. Which can be considered as legitimus at that time, because after-all caches help to reduce latency on cached data access, hence reduce the response-time. But like all caches, you need to define caching and expiration policies, thinking about the cache-missed strategy, and most of the time you have to re-write partially your application in order to work with the cache. At a result, the expected benefit vanishes... so, not very useful then?The key mistake I made was my perception or obsession on how performance improvement should be driven, but I strongly believe this is still a common problem to most of the developers. In fact we all know the that the performance of a system is generally presented by the Capacity (or Throughput), with the 2 important dimensions Speed (response-time) and Volume (load) :Capacity (TPS) = Volume (T) / Speed (S)To increase the Capacity, we can either reduce the Speed(in terms of response-time), or to increase the Volume. However we tend to only focus on reducing the Speed dimension, perhaps it is more concrete and tangible to measure, and nicer to present to our management because there's a direct impact onto the end-users experience. On the other hand, we assume the Volume can be addressed by the underlying hardware or software stack, so if we need more capacity (scale out), we just add more hardware or software. Unfortunately, the reality proves that IT is never as ideal as we assume...The challenge with Speed improvement approach is that it is generally difficult and costly to make things already fast... faster. And by adding Coherence will not necessarily help either. Even though we manage to do so, the Capacity can not increase forever because... the Speed can be influenced by the Volume. For all system, we always have a performance illustration as follow: In all traditional system, the increase of Volume (Transaction) will also increase the Speed (Response-Time) as some point. The reason is simple: most of the time the Application logics were not designed to scale. As an example, if you have a while-loop in your application, it is natural to conceive that parsing 200 entries will require double execution-time compared to 100 entries. If you need to "Speed-up" the execution, you can only upgrade your hardware (scale-up) with faster CPU and/or network to reduce network latency. It is technically limited and economically inefficient. And this is exactly where XTP and Coherence kick in. The primary objective of XTP is about designing applications which can scale-out for increasing the Volume, by applying coding techniques to keep the execution-time as constant as possible, independently of the number of runtime data being manipulated. It is actually not just about having an application running as fast as possible, but about having a much more predictable system, with constant response-time and linearly scale, so we can easily increase throughput by adding more hardwares in parallel. It is in general combined with the Low Latency Programming model, where we tried to optimize the network usage as much as possible, either from the programmatic angle (less network-hoops to complete a task), and/or from a hardware angle (faster network equipments). In this picture, Oracle Coherence can be considered as software-level XTP enabler, via the Distributed-Cache because it can guarantee: - Constant Data Objects access time, independently from the number of Objects and the Coherence Cluster size - Data Objects Distribution by Affinity for in-memory data grouping - In-place Data Processing for parallel executionTo summarize, Oracle Coherence is indeed useful to improve your application performance, just not in the way we commonly think. It's not about the Speed itself, but about the overall Capacity with Extreme Load while keeping consistant Speed. In the future I will keep adding new blog entries around this topic, with some sample codes experiences sharing that I capture in the last few years. In the meanwhile if you want to know more how Oracle Coherence, I strongly suggest you to start with checking how our worldwide customers are using Oracle Coherence first, then you can start playing with the product through our tutorial.Have Fun !

  Read the article

• Why bother writing an Windows 8 app?

  - by Dennis Vroegop

  So you want to know more about development for Window 8. Great! There are lots of reasons you should be excited about this. Since I don’t know why YOU are interested in this, I’ll make a list of reasons people can choose from. (as a side note: whenever I talk about Win8 development I am referring to the Metro Style / WinRt side of things. Apps for the ‘classic’ desktop side of Win8 on Intel are business as usual…) So… Why would you care about making an app for Windows 8? 1. It’s cool. Let’s not beat around the bush: if you like development for a hobby then you’ll love to work on this new platform. You can create apps in a relative short time (short time as in compared to writing a new CRM system) and that makes it great for a hobby product. 2. You’ll stand out. Hey, we all need an ego boost every now and then. We all need to feel special. So if you can manage to be one of the first to have you app in the Store then you’ll likely to be noticed. Just close your eyes for a moment and image you standing in a bar. It’s crowded, and then you casually say “Oh yeah, I just had my app certified and it’s in the Win8 store now”. People will stop talking, will offer you drinks and beautiful women / gorgeous man / furry creatures from Alpha Centauri (whatever your preferences are) will propose. Or maybe not. Anyway…. 3. Make some cash! IDC predicts there will be about 350,000,000 Windows 8 licenses sold in the next year. Think about that number. 350,000,000. And they all have access to the Store. Where you’re app will be. With one little click they can select it, download and somehow magically $1.00 or $2.00 from their bank account is transferred to yours. Now, I am not saying that all of those people will download and buy your app but what if only 1% of them did? Remember: there aren’t that many apps available yet….. 4. Learn. Creating new small apps is a great way to learn new stuff. Yes, you could read about it (on this blog for instance) but the only way to learn something is to do it. So be prepared for the future and learn something new by doing it.Write an app! Now! 5. The biggie (for me at least): it’s fun. Even if you remove the points above it’s still fun to write for these devices and this platform. Now some of you will say : “But why not write a great app for IOS or Android?” I think this is a valid question. Of course the novelty of the platform wears out and points 2 and 3 from above list will not be as relevant as it is today. But still 1 4 and 5 remain. And don’t forget: if you already work on the Microsoft platform it’s not that hard to learn this new Win8 stuff. If you have done some XAML development (be it WPF or Silverlight) you are almost there in becoming a good Win8 developer. So you’ll be more productive much sooner than when you have to learn Objective C or Java. Even if you’re a HTML / Javascript developer (I say developer here, not designer) you’ll be up to speed on Win8 development pretty soon. Yes, you, that funky Web Developer who lives and breathes HTML5, CSS3 and JavaScript / Node.Js / JQuery: you too can be a Win8 developer. A first class Win8 developer! So.. Download the stuff you need from http://dev.windows.com install Windows 8 and Visual Studio 12 and by the time you’re ready I’ll be working on the next article: how to do all this? Happy coding!

  Read the article

• CS, SE, HCI, Information Science, Please recommendation for further education of the former performing art manager seeking career in IT industries? [on hold]

  - by Baek Seungjoo

  IT specialists there J Thank you very much for your collective efforts here, and I got huge help reading your professional comments and advices on each questions I have searched so far! This time, I would like to ask for your practical advices or recommendation on what I am struggling on at this moment. I am currently seeking higher education for my career transition from performing art manager and director to “IT software and/or service development and management specialist”. However, as this field is quite new to me, and there are lots of different work positions, I have no idea which grad major I better pursue in order to get qualification. Of course I know this question could sounds wired as it is kind of personal choice. But my lack of understanding on how IT software companies work in general, your practical and experience-based advice will be great help to me, who spent more than two months of self-research on net. OK. Before my question, here is my plan and history, which are quite different from those currently in IT industry I think… 1) Target Firstly, get career transition into IT service or products companies and get experiences. Eventually, pursue IT entrepreneurship in combination with my arts and cultural production and business expertise. 2) Background Career: performing arts director and manager in theatre-based scale opera and musical Art education in youth BA in literature and Chinese studies (Art & Humanities) MA in Cultural & Creative Industries (Art & Humanities) – dissertation with focus on digital prosumption and the lived experience of the prosumer. (a qualitative research on the agents in the digital world) 2) Personally Huge interest in IT hardware and software, and their trend. Skills to build up, repair, tune PCs -of course this is no more than personal hobby, but shows my interests in this field. 4) Problem Encounter a question “So, what do you think you can contribute practically in this position”. This question turn me down everytime I go through job interviews, and I decided more education in the relevant area. Here are my questions. 1) In terms of work positions in IT software companies, I wonder if I can put the comparison of what “Artists” is to “Arts Manager or Director” is what “Developer” is to “Product Manager”. (Of course, this stereotypical division of Artist-Art Manager is out of sense because the domain overlaps to some extent, and is blurring at least in my field, and they are in different contexts, but just speaking easily.) Normally, artist comes with special arts educations, and they live in their own world of artistic inspiration and creation, and they feel alive in practice and on stages. Meanwhile, from the point of staging and managing productions, the role of art manager is critical as well. Our role cares how the production appeals to the audience in effective way, how to make profit and future sustainable management through that, how to set up future strategy in consideration of the external conditions such as political and social circumstances, audience trend and level, other production trends from on-going and historical perspectives, how and what the production make voice to the society from political, economic, humanitarian stances. So, we need keen eyes on economic, political, and societal environment, have to understand human-being and their desires, must know how to make presentation and attract investors, must have sense in managing and fighting over the limited financial resource, how to extend networking and so on. It is common that the two agents create productions in collaboration (normally not in that ideal way but in conflict and fight though J ). So, we need to know each other’s expertise to some extent, for better production. What are the work positions in IT software industries equivalent to the role of “art manager” in performing arts? From my view, considering developers come with special education in the world of computer science, software engineering, or others (self-education sometimes), and they express themselves with the arts of coding, computer languages on the black screen, and make sort of their artistic production online to the audience, I guess there might be someone who collaborate with developers in creating, managing, and launching IT services or products. 2) Which education among CS, SE, HCI, Information Science, is needed for those seeking such work position? Especially for person like me. (At this moment, Information Science has the highest possibility to get in, since I lack Calculus and Math in undergrad educaiton. But please let me know irrespective of this concern, I think there are ways to back it up if CS or SE education needed in my case) 3) Which field between Information Science and HCI can be more practical background regarding job hungting? And which of them have more demands in job market? AS I checked, HCI is more close to CS than IS in its focus of study area. Thank you very much for your patience reading such a long inquiry, and I appreciate to your efforts in advance. Have a nice day in this beautiful summer.

  Read the article

• World Backup Day

  - by red(at)work

  Here at Red Gate Towers, the SQL Backup development team have been hunkered down in their shed for the last few months, with the toolbox, blowtorch and chamois leather out, upgrading SQL Backup. When we started, autumn leaves were falling. Now we're about to finish, spring flowers are budding. If not quite a gleaming new machine, at the very least a familiar, reliable engine with some shiny new bits on it will trundle magnificently out of the workshop. One of the interesting things I've noticed about working on software development teams is that the team is together for so long 'implementing' stuff - designing, coding, testing, fixing bugs and so on - that you occasionally forget why you're doing what you're doing. Doubt creeps in. It feels like a long time since we launched this project in a fanfare of optimism and enthusiasm, and all that clarity of purpose and mission "yee-haw" has dissipated with the daily pressures of development. Every now and again, we look up from our bunker and notice all those thousands of users out there, with their different configurations and working practices and each with their own set of problems and requirements, and we ask ourselves "does anyone care about what we're doing?" Has the world moved on while we've been busy? Could we have been doing something more useful with the time and talent of all these excellent people we've assembled? In truth, you can research and test and validate all you like, but you never really know if you've done the right thing (or at least, something valuable for some users) until you release. All projects suffer this insecurity. If they don't, maybe you're not worrying enough about what you're building. The two enemies of software development are certainty and complacency. Oh, and of course, rival teams with Nerf guns. The goal of SQL Backup 7 is to make it so easy to schedule regular restores of your backups that you have no excuse not to. Why schedule a restore? Because your data is not as good as your last backup. It's only as good as your last successful restore. If you're not checking your backups by restoring them and running an integrity check on the database, you're only doing half the job. It seems that most DBAs know that this is best practice, but it can be tricky and time-consuming to set up, so it's one of those tasks that can get forgotten in the midst all the other demands on their time. Sometimes, they're just too busy firefighting. But if it was simple to do? That was our inspiration for SQL Backup 7. So it was heartening to read Brent Ozar's blog post the other day about World Backup Day. To be honest, I'd never heard of World Backup Day (Talk Like a Pirate Day, yes, but not this one); however, its emphasis on not just backing up your data but checking the validity of those backups was exactly the same message we had in mind when building SQL Backup 7. It's printed on a piece of A3 above our planning board - "Make backup verification so easy to do that no DBA has an excuse for not doing it" It's the missing piece that completes the puzzle. Simple idea, great concept, useful feature, but, as it turned out, far from straightforward to implement. The problem is the future. As Marty McFly discovered over the course of three movies, the future is uncertain and hard to predict - so when you are scheduling a restore to take place an hour, day, week or month after the backup, there are all kinds of questions that you wouldn't normally have to consider. Where will this backup live? Will it even exist at the time? Will it be split into multiple files? What will the file names be? Will it be encrypted? What files should it be restored to? SQL Backup needs to know what to expect at the time the restore job is actually run. Of course, a DBA will know the answer to all these questions, but to deliver the whole point of version 7, we wanted to make it easy for them to input that information into SQL Backup. We think we've done that. When you create your scheduled backup job, there is now an option to create a "reminder" to follow it up with a scheduled restore to verify the resulting backups. Actually, it's much more than a reminder, as it stores all the relevant data so you can click it and pre-populate the wizard with all the right settings to set up your verification restores. Simple. But, what do you think? We'd love you to try it. Post by Brian Harris

  Read the article

• Navigate Quickly with JustCode and Ctrl+Click

  Ctrl + Click is a widely used shortcut for Go To Definition in many development environments but not in Visual Studio. We, the JustCode team, find it really useful so we added it to Visual Studio. But we didn't stop there - we improved it even further. Read on to find the details. With JustCode you get an enhanced Go To Definition. By default you can execute it in the Visual Studio editor using one of the following shortcuts: Middle Click, Ctrl+Left Click, F12, Ctrl+Enter, Ctrl+B. The first usage of this feature is not much different from the default Visual Studio Go To Definition command use it where a member, type, method, property, etc is used to navigate to the definition of that item. For example, if you have this method:         public void Start()         {             lion = new Lion();             lion.Roar();         } If you hold Ctrl and click on the usage of the lion you will go to the lion member definition. If you hold Ctrl and click on the Lion you will go to the Lion class definition. What we added is the ability to easily find all the usages of the item you just navigated to. For example:     public class Lion     {         public void Roar()         {             Console.WriteLine("Rhaaaar");         }     }   If you hold Ctrl and click on the Lion definition you will see all the usages of the Lion type; if you click on the Roar method definition you will see all the usages of the Roar method: And if there is only one usage you will get automatically to that usage. In the examples I use C#, but it works also in VB.NET, JavaScript, ASP.NET and XAML. Why we like this feature? Let me first start with how the Ctrl+Click (or Go To Definition command) is used. We noticed that developers use it especially in what we call "code browsing sessions". In simple words this is when you browse around the code looking for a bug, just reading the code or searching for something. Sounds familiar? In our experience when you go to the definition of some item you often want to know more about it and the first thing you need is to find its usages. With JustCode this is just one click away. Why Ctrl+Click/Middle Click over F12/Ctrl+Enter/Ctrl+B? Actually you can use all of them. But during these "code browsing sessions" we noticed that most developers use the mouse. So the mouse is already in use and pressing Ctrl+Click (or the Middle Click) is so natural. During heavy coding sessions or if you are a keyboard type developer F12 (or any of the other keyboard shortcuts) is the key. We really use heavily this feature not only in our team but in the whole company. It saves us a bit of time many times a day. And it adds up. We hope you will like it too. Your feedback is more than welcome for us. P.S. If you dont want JustCode to capture the Ctrl+Click and the Middle Click in the editor, you can change that in JustCode->Options->General in the Navigation group. Keyboard shortcuts can be reassigned using the Visual Studio keyboard shortcuts editor.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• What Counts for A DBA - Logic

  - by drsql

  "There are 10 kinds of people in the world. Those who will always wonder why there are only two items in my list and those who will figured it out the first time they saw this very old joke."  Those readers who will give up immediately and get frustrated with me for not explaining it to them are not likely going to be great technical professionals of any sort, much less a programmer or administrator who will be constantly dealing with the common failures that make up a DBA's day.  Many of these people will stare at this like a dog staring at a traffic signal and still have no more idea of how to decipher the riddle. Without explanation they will give up, call the joke "stupid" and, feeling quite superior, walk away indignantly to their job likely flipping patties of meat-by-product. As a data professional or any programmer who has strayed  to this very data-oriented blog, you would, if you are worth your weight in air, either have recognized immediately what was going on, or felt a bit ignorant.  Your friends are chuckling over the joke, but why is it funny? Unfortunately you left your smartphone at home on the dresser because you were up late last night programming and were running late to work (again), so you will either have to fake a laugh or figure it out.  Digging through the joke, you figure out that the word "two" is the most important part, since initially the joke mentioned 10. Hmm, why did they spell out two, but not ten? Maybe 10 could be interpreted a different way?  As a DBA, this sort of logic comes into play every day, and sometimes it doesn't involve nerdy riddles or Star Wars folklore.  When you turn on your computer and get the dreaded blue screen of death, you don't immediately cry to the help desk and sit on your thumbs and whine about not being able to work. Do that and your co-workers will question your nerd-hood; I know I certainly would. You figure out the problem, and when you have it narrowed down, you call the help desk and tell them what the problem is, usually having to explain that yes, you did in fact try to reboot before calling.  Of course, sometimes humility does come in to play when you reach the end of your abilities, but the ‘end of abilities’ is not something any of us recognize readily. It is handy to have the ability to use logic to solve uncommon problems: It becomes especially useful when you are trying to solve a data-related problem such as a query performance issue, and the way that you approach things will tell your coworkers a great deal about your abilities.  The novice is likely to immediately take the approach of  trying to add more indexes or blaming the hardware. As you become more and more experienced, it becomes increasingly obvious that performance issues are a very complex topic. A query may be slow for a myriad of reasons, from concurrency issues, a poor query plan because of a parameter value (like parameter sniffing,) poor coding standards, or just because it is a complex query that is going to be slow sometimes. Some queries that you will deal with may have twenty joins and hundreds of search criteria, and it can take a lot of thought to determine what is going on.  You can usually figure out the problem to almost any query by using basic knowledge of how joins and queries work, together with the help of such things as the query plan, profiler or monitoring tools.  It is not unlikely that it can take a full day’s work to understand some queries, breaking them down into smaller queries to find a very tiny problem. Not every time will you actually find the problem, and it is part of the process to occasionally admit that the problem is random, and everything works fine now.  Sometimes, it is necessary to realize that a problem is outside of your current knowledge, and admit temporary defeat: You can, at least, narrow down the source of the problem by looking logically at all of the possible solutions. By doing this, you can satisfy your curiosity and learn more about what the actual problem was. For example, in the joke, had you never been exposed to the concept of binary numbers, there is no way you could have known that binary - 10 = decimal - 2, but you could have logically come to the conclusion that 10 must not mean ten in the context of the joke, and at that point you are that much closer to getting the joke and at least won't feel so ignorant.

  Read the article

• Mounting ddrescue image after recovery (in over my head)

  - by BorgDomination

  I'm having problems mounting the recovery image. I've tried to mount the image multiple ways. quark@DS9 ~ $ sudo mount -t ext4 /media/jump1/1recover/sdb1.img /mnt mount: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so quark@DS9 ~ $ sudo mount -r -o loop /media/jump1/1recover/sdb1.img recover mount: you must specify the filesystem type quark@DS9 ~ $ sudo mount /media/jump1/1recover/sdb1.img mnt mount: you must specify the filesystem type It doesn't even give me detailed information on the file I just made, nautilus says it's 160gb. quark@DS9 ~ $ file /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img: data quark@DS9 ~ $ mmls /media/jump1/1recover/sdb1.img Cannot determine partition type I'm not sure what I'm doing wrong or if I started this process incorrectly from the beginning. I've outlined what I've done so far below. I'm clueless, I'd appreciate if someone had some input for me. What I have done from the beginning My laptop has two hard drives. One has the dual boot Win7 / Linux Mint system files. Secondary one contained my /home folder. The laptop was jarred and the /home disk was broken. I tried a LiveCD recovery, it failed. Wouldn't even load a Live session with the disk installed. So I turned to ddrescue. quark@DS9 ~ $ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009fc18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 112642047 56320000 7 HPFS/NTFS/exFAT /dev/sda2 138033152 312580095 87273472 83 Linux /dev/sda3 112644094 138033151 12694529 5 Extended /dev/sda5 112644096 132173823 9764864 83 Linux /dev/sda6 132175872 138033151 2928640 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002a8ea Device Boot Start End Blocks Id System /dev/sdb1 * 63 312576704 156288321 83 Linux Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xed6d054b Device Boot Start End Blocks Id System /dev/sdc1 63 1953520064 976760001 7 HPFS/NTFS/exFAT sda - 160g internal, holds all system files and all computer functions. sdb - 160g internal, BROKEN, contains about 140g of data I'd like to recover. sdc - 1T external, contains recovery image. Only place that has space to do all this. From this site, https://apps.education.ucsb.edu/wiki/Ddrescue I used this script to create an image of the broken hard drive. I changed the destination to the external USB drive. #!/bin/sh prt=sdb1 src=/dev/$prt dst=/media/jump1/1recover/$prt.img log=$dst.log sudo time ddrescue --no-split $src $dst $log sudo time ddrescue --direct --max-retries=3 $src $dst $log sudo time ddrescue --direct --retrim --max-retries=3 $src $dst $log Everything looked like it came off without a hitch: quark@DS9 ~ $ sudo bash recover1 Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 0 B, errsize: 0 B, errors: 0 Current status rescued: 160039 MB, errsize: 4096 B, current rate: 35588 B/s ipos: 3584 B, errors: 1, average rate: 22859 kB/s opos: 3584 B, time from last successful read: 0 s Finished 12.78user 1060.42system 1:56:41elapsed 15%CPU (0avgtext+0avgdata 4944maxresident)k 312580958inputs+0outputs (1major+601minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 4096 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 13 B/s opos: 1536 B, time from last successful read: 1.3 m Finished 0.00user 0.00system 3:43.95elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 238inputs+0outputs (3major+374minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 1024 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 0 B/s opos: 1536 B, time from last successful read: 3.7 m Finished 0.00user 0.00system 3:43.56elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 8inputs+0outputs (0major+376minor)pagefaults 0swaps It looks like, from where I'm standing it worked perfectly. Here's the log: # Rescue Logfile. Created by GNU ddrescue version 1.14 # Command line: ddrescue --direct --retrim --max-retries=3 /dev/sdb1 /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img.log # current_pos current_status 0x00000600 + # pos size status 0x00000000 0x00000400 + 0x00000400 0x00000400 - 0x00000800 0x254314FC00 + I'm not sure how to proceed. Does this mean all of my data is lost???????? Appreciate ANY input!

  Read the article

< Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >