Search Results

Search found 9340 results on 374 pages for 'andy boot'.

Page 312/374 | < Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >

• Multi-monitor resolution and position settings lost after reboot

  - by SoftDeveloper

  I've had two 1280x1024 monitors running for years on an nVidia 8800GT card with no problems. I've now replaced one monitor with a new 2560x1440 one. The card seems to support both fine, however every time I reboot the resolutions and monitor positions revert to the old settings. I've tried upgrading, downgrading, stripping out and reinstalling many versions of the nvidia drivers to no avail. Logging in as another user doesn't help - same problem. Booting into another another OS (Win7 64) works OK, so it is just this OS installation. During boot up everything looks fine (ie native 2450x1440 res) until the nVidia control panel or something is loaded which flips it back into the old mode. I have no old saved nvidia profiles. I can't find anything in the registry relating to these old settings. Its driving me crazy having to set resolutions and realign monitors on every reboot! Can anybody help?

  Read the article

• Asus Z8NA-D6, not powering up/no signal for monitor

  - by s093294

  I have a Asus Z8NA-D6 motherboard. Been running fine so far with one E5504 Xeon processor. I have added another Xeon E5504 CPU to the second slot and it will not power up (or there is no signal to the monitor). The status lights turn on as normal. no error led. Nothing happens other then the leds start and both cpus/fans power up. HDD power up. I tried clearing CMOS. Any sugestions? http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6/#download Update. Removing ram for second cpu makes it boot atleast. itboots with memory pluged in for cpu 1. (2 4gb modules) when addin one more to the second cpu it still boots but bios only see the 2 blocks at cpu 1)

  Read the article

• Permissions issue on Fedora with separate home partition

  - by Tres

  I am running Fedora 12 and I've setup a partition separate from my root partition to keep shared files and home directories. Now, I've been having permission issues where it says the user cannot chdir into their home directory (/files/home/*). Now, I fixed this originally by chmodding / to 0755 and the home directories also to 0755. And yes, the user is the owner:group of their home directory. Now get this, I didn't change a thing, rebooted, everything still works. Great, right? I boot the server up a day later, and now same ol issue. This is a home server that wasn't on at all at any point in between the working state and non-working state. Also, nothing else was modified. Any ideas? Thanks!

  Read the article

• Installing linux on computer with Marvell adapter

  - by Seth

  I recently reinstalled my computer and decided that I want to have a native installation of linux side by side with windows (got tired of VMWare). The thing is upon installation (debian) everything goes fine until the disc detection section - linux can't find my western digital 1TB drive (IDE mode). I don't have the installation disc with me now, but I think that when i changed the mode to AHCI everything worked, though Windows couldn't boot so this is not an option. I have a Marvell 91xx controller. Any ideas?

  Read the article

• kernel 2.6.36 not booting

  - by Saumitra

  Hi, I m a newbie to kernel programming. I am trying to boot the kernel 2.6.36 on my ECG machine.It was working perfectly on 2.6.33.2. It is getting stuck on this step: ## Booting kernel from Legacy Image at 81000000 ... Image Name: Created: 2010-12-27 5:55:56 UTC Image Type: MIPS Linux Kernel Image (gzip compressed) Data Size: 1974278 Bytes = 1.9 MB Load Address: 80100000 Entry Point: 80104730 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... After this the system either resets or it hangs. I have also checked the configuration & set it properly.Please let me know.

  Read the article

• Very small image for rebuilds

  - by Deon

  I worked at a place last year that had a very small image for Windows XP re-builds. It was two Norton GHO files, totalling about 2-3 GB. This is how it worked: Boot into Norton Ghost Map to the network share where the images lived Apply the image to the workstation Reboot It would then load into Windows Setup Enter the Domain Admin credentials so it can join the domain That's it... it would then reboot into Windows and the image was complete. How did they make an image so small? Did they perhaps kick off a Windows install and create an image then? I particularly liked how it required no user input other than a domain admin login.

  Read the article

• Ubuntu reset network configuration

  - by user1103294

  When I boot up my ubuntu server, it cannot connect to my wireless network anymore. It says "waiting for network configuration" for 60 seconds, boots up, but no wireless. I suspect it's because of the following reasons. I used to connect to a wireless connection named 2WIRE555, password: 123abc But then I upgraded my connection and my new wireless connection was named 2WIRE444, password:111111 Being lazy, I simply renamed 2WIRE555 to 2WIRE444 and changed the password accordingly. I was hoping this would work but ever since then my network configurations is messed up. So back to the issue, how do I reset my network configurations for my Ubuntu 11.10 server?

  Read the article

• windows 7 partition disappeared

  - by atoMerz

  I have a VPCF2 with windows 7 installed on it. I was working on my computer when on of my drives (D) disappeared. I can see it in Computer Management>Disk Management and it'd marked as Healthy(Primary Partition). When I right click on it the only options that are enabled are Delete Volume and Help. So I cannot assign a drive letter to it (not even in safe mode). I tried System Restore and it failed. I tried to boot the system using ubuntu tha was installed on my system but that fails too because it was installed on partition D. I'm hopeless. What can I do?

  Read the article

• Can I run Win7 virtualized for my HTPC?

  - by Daniel Schaffer

  I'm currently running Vista for my HTPC, and am planning on upgrading to Win7 soon. However, I've been considering installing it as a VM so that I can run Windows Server 2008 and/or Windows Home Server. The single requirement is that the HTPC must boot up to Windows Media Center with absolutely no user intervention. I need to be able to hit the power button have it go. I've got this working currently, so I don't need to keep a keyboard or mouse plugged in - all I use is my remote. If possible, I'd love to be able to do these other things: Use Win2k8 Server as a VM host for Win7 Pro and WHS. This also lets me run IIS7 for doing ASP.NET development Use WHS for all the wonderful things it does for a home network Are either of the two optional things possible while meeting the WMC requirement?

  Read the article

• Replacing explorer.exe under Windows 7

  - by Whitey

  A bit of an odd request I gather, but for reasons too deep to go into detail here I need to replace my explorer.exe in the C:\Windows directory. I have tried doing it myself, through the GUI and command prompt (ran as administrator) but I get access denied. It seems that being an admin on your machine is not the highest permission level after all, and only Trusted Installer can modify the file. Does anybody know a way that works? I was about to boot into safe mode and try it but wanted to get some feedback before I do anything in-depth. Thanks.

  Read the article

• Is Clonezilla a good option for a daily batch-file-based backup of a Windows XP PC?

  - by rossmcm

  Having just been through the process of rebuilding a Windows XP desktop machine when the disk died, I'm anxious to make it a lot less painful. I didn't lose any data, but reinstalling everything took ages. Clonezilla seems to be a highly mentioned free backup tool. How easy would it be to implement the following: a nightly unattended backup of the desktop's disk image to another network machine (or a second drive in the machine), hopefully with compression. restore from that image using USB boot media. so that if I come in to work and find the hard drive has tanked, it is just a matter of replacing the dead drive with a new one, booting from the USB stick, choosing the image to restore, and then finding something else to do for an hour or two. When it is finished I would hopefully be back to where I was.

  Read the article

• Windows 7 ISO not booting from DVD drive?

  - by chum of chance

  I've downloaded Windows 7 x64 Pro Upgrade from the volume license center. I've also downloaded the Windows 7 USB/DVD download tool. I'll burn it using this tool and while it will show up in Explorer as if the burn worked correctly, when I try to boot to the DVD on startup, I get a "No operating system found" error (this is a newer Lenovo). My Ubuntu Live CD works fine, am I missing something? I read that there's problems if you try to burn a 64bit copy from a 32bit computer, but I'm currently running Win7x64, so that shouldn't be a problem. I've also tried burning with ImgBurn and Windows 7 built ISO burner, no success. Obviously there's a step I'm missing here, what gives?

  Read the article

• Moving to an SSD with Windows 7

  - by Nick Gerakines

  Disclaimer: I've been digging around for a few days and didn't get what I was looking for in terms of answers, so I'm asking here. I've recently purchased an 80g SSD drive to use as my boot up and OS parition. I've got a windows 7 desktop with two 1TB (raid0) disks currently and I'm not sure where to start in terms of copying / moving the OS. I suppose that doing a fresh install isn't out of the question, but I've got an upgrade disk from Vista that I'd have to deal with. Where do I begin?

  Read the article

• Can I move a copy of Windows 7 from one machine to another?

  - by Chopper3

  This is a pretty basic question sorry but I've looked in the 'related questions' and couldn't find an answer. When Windows 7 came out I bought a copy of Home Premium, the retail box with both 32 and 64 bit versions, to install via Boot Camp on my macbook. I've just got a retail (32 and 64 bit) copy of Windows 7 Ultimate that I'd like to install instead-of/over the Home Premium version and it struck me that I should, at least in principal be able to install the Home Premium version on my son's machine - is this the case and if so is there anything I should do first or once they're installed to let MS know I'm being a good guy about this? Sorry it's such a dim question but I'm a serverfault guy really and know very little about Windows. Thanks.

  Read the article

• Debian can't see one of my hard drives

  - by nask00s

  Today I installed Linux Debian in dual boot with Windows 7. I have 3 hard drives, two for starage and one for the operating systems. The problem is with the two storage drives which are exactly same. In debian I can only see one of them. Before Debian I had Ubuntu and there wasn't any problem. Also I didn't changed anything from that drive. What should I do? I don't want to format it or delete anything.

  Read the article

• Fixing Windows 7 explorer issues

  - by Cegorach

  OK, so here is the problem I'm hoping you guys can help me fix. On my Win7-Ult64 box, my explorer (among other things) has decided not to work. For example, if I try to use a program, say Chrome, to open a folder, I will get the message "Class not registered" (and its not program specific). In the same vein, when I go to Start-Rclick Computer-properties, nothing happens, but I can go to control panel-system properties and it will work. And other items in the control panel do nothing when I click them (and I have a feeling it is all tied together). I have already done multiple virus and spyware sweeps, so I know that isn't the problem. Any suggestions on what could be causing this/how to fix it (short of nuke and boot)?

  Read the article

• How to remove AegisP.sys

  - by NinjaCat

  When I boot my laptop, I get the following event in the error log... I cannot tell which service is trying to use the aegisp.sys file or generating this event. Can anyone shed some light? Google is not very helpful with this issue ;) Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7000 Date: 8/20/2010 Time: 10:50:03 PM User: N/A Computer: XXX Description: The AEGIS Protocol (IEEE 802.1x) v3.6.0.0 service failed to start due to the following error: The system cannot find the file specified. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• BIOS recognizes HD, but Ubuntu doesn't recognize it as partition

  - by user23792

  Hello, I just stuck in a new 64 GB SSD (literally out of the box) into my Lenovo X61 laptop, replacing an old 5400 RPM 80 GB drive. When I boot the system, my motherboard successfully sees the SATA hard drive. Now I want to install Ubuntu on it. I stick it in the CD drive, bootup the system, and it gets to step 4 (choose partition), but sees no available partitions. Do I need to do something to the hard drive before installing Ubuntu? Many thanks.

  Read the article

• How can I fix a computer that is infested with malware and is extremely unresponsive? [closed]

  - by fredley

  Possible Duplicate: How do I get rid of malicious spyware, malware, viruses or rootkits from my PC? I'm troubleshooting a Windows 7 PC for a friend. A couple of days ago it started running 'slow'. It turns out 'slow' is about 15 minutes to the first glimpse of the desktop, and another 30 to show icons. It is possible to open Task Manager, and nothing seems awry, CPU usage at 1-5%, plenty of memory free. The machine is clearly infested with malware though, in particular a program called 'Optimizer Pro' is demanding money to 'remove 5102 files slowing down my computer'. This seems highly suspicious. My problem is though, that I can't access msconfig (I left it for a couple of hours after having hopefully typed it into the Start Menu and hit enter - nothing seems to have loaded), or anything at all basically. I can boot from a Linux Live CD, but can I actually do anything useful from there? System Restore hasn't fixed it either, and Safe Mode exhibits the same behavior.

  Read the article

• Recovering data from a corrupted disk

  - by r_honey

  I use an external harddisk to backup my data (it had 3 partitions). Last week when I plugged it in, the OS (Win 7) hung up and I had to force re-boot the machine. When I turned it back on, the system just did not detect the hard-disk. It was last Sunday and I had to give up after sometime. Now I return back next Sunday (today) and when I plug it back-in to the machine, the OS detects the disk as well as all the 3 partitions on it. But it says all 3 are unformatted and I cant access any of them. Is there any way to recover data from the 3 partitions (I tried PC File Recovery and Recuva from PiriForm but neither detected these partitions).

  Read the article

• What are my options for a disk with what seems to be a corrupted filesystem?

  - by CT

  I have a friend with an old Dell that will not boot into Windows. It has an IDE drive. It spins up. I have an IDE to USB device. I've attached the drive via that device to a working laptop. The drive does not mount. If I go into Disk Management I can see the drive but it will not initalize, says "Drive not ready." I've also booted into a linux live cd to see if the drive mounts, it does not. I am just trying to recover some pictures from the drive. The data is not important enough to send to a professional. The issue is more of a curosity on how to recover data if and when these situations would occur in the future.

  Read the article

• What's a worthwhile test for a new HD?

  - by Michael Kohne

  I work for a company that uses standard 2.5" SATA HD's in our product. We presently test them by running the Linux 'badblocks -w' command on them when we get them - but they are 160 gig drives, so that takes like 5 hours (we boot parted magic onto a PC to do the scan). We don't actually build that many systems at a time, so this doable, but seriously annoying. Is there any research or anecdotal evidence on what a good incoming test for a hard drive should be? I'm thinking that we should just wipe them with all zeros, write out our image, and do a full drive read back. That would end up being only about 1 hour 45 minutes total. Given that drives do block remapping on their own, would what I've proposed show up any infant mortality just as well as running badblocks?

  Read the article

• Windows XP Log In: Can't do it. Logon Message popup.

  - by kojobino

  A friend recommended this site to me. Hope you can help! I can't seem to log into Windows. I boot my computer. The log In screen appears. I put in my user name and password, hit OK, and the following message pops up: "The system could not log you on. Make sure your user name and domain name are correct, then type your password again. Letters in your passwords must be typed using the correct case". NOTE: I have tried Safe Mode and the same message pops up. Just to be clear, I am not able to get into Windows (I'm stressing this b/c I've come across some suggestions that require you to be in Windows, which doesn't help in my case). Thanks for your assistance. -Stranded in Toronto

  Read the article

• Accessing a broken mdadm raid

  - by CarstenCarsten

  Hi! I used a western digital mybookworld (SOHO NAS storage using Linux) as backup for my Linux box. Suddenly, the mybookworld does not boot up any more. So I opened the box, removed the hard disk and put the hard disk into an external USB HDD case, and connected it to my Linux box. [ 530.640301] usb 2-1: new high speed USB device using ehci_hcd and address 3 [ 530.797630] scsi7 : usb-storage 2-1:1.0 [ 531.794844] scsi 7:0:0:0: Direct-Access WDC WD75 00AAKS-00RBA0 PQ: 0 ANSI: 2 [ 531.796490] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 531.797966] sd 7:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 531.800317] sd 7:0:0:0: [sdc] Write Protect is off [ 531.800327] sd 7:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 531.800333] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803821] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803836] sdc: sdc1 sdc2 sdc3 sdc4 [ 531.815831] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.815842] sd 7:0:0:0: [sdc] Attached SCSI disk The dmesg output looks normal, but I was wondering why the hardisk was not mounted at all. And why there are 4 different partitions on it. fdisk showed the following: root@ubuntu:/home/ubuntu# fdisk /dev/sdc WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdc: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00007c00 Device Boot Start End Blocks Id System /dev/sdc1 4 369 2939895 fd Linux raid autodetect /dev/sdc2 370 382 104422+ fd Linux raid autodetect /dev/sdc3 383 505 987997+ fd Linux raid autodetect /dev/sdc4 506 91201 728515620 fd Linux raid autodetect Oh no! Everything seems to be created as a mdadm software raid. Calling mdadm --examine with the different partitions seems to affirm that. I think the only partition I am interested in, is /dev/sdc4 (because it is the largest). But nevertheless I called mdadm --examine with every partition. root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc1 /dev/sdc1: Magic : a92b4efc Version : 00.90.00 UUID : 5626a2d8:070ad992:ef1c8d24:cd8e13e4 Creation Time : Wed Feb 20 00:57:49 2002 Raid Level : raid1 Used Dev Size : 2939776 (2.80 GiB 3.01 GB) Array Size : 2939776 (2.80 GiB 3.01 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 1 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 4c90bc55 - correct Events : 16682 Number Major Minor RaidDevice State this 0 8 1 0 active sync /dev/sda1 0 0 8 1 0 active sync /dev/sda1 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc2 /dev/sdc2: Magic : a92b4efc Version : 00.90.00 UUID : 9734b3ee:2d5af206:05fe3413:585f7f26 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 104320 (101.89 MiB 106.82 MB) Array Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 2 Update Time : Wed Oct 27 20:19:08 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 55560b40 - correct Events : 9884 Number Major Minor RaidDevice State this 0 8 2 0 active sync /dev/sda2 0 0 8 2 0 active sync /dev/sda2 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc3 /dev/sdc3: Magic : a92b4efc Version : 00.90.00 UUID : 08f30b4f:91cca15d:2332bfef:48e67824 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 987904 (964.91 MiB 1011.61 MB) Array Size : 987904 (964.91 MiB 1011.61 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 3 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 39717874 - correct Events : 73678 Number Major Minor RaidDevice State this 0 8 3 0 active sync 0 0 8 3 0 active sync 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc4 /dev/sdc4: Magic : a92b4efc Version : 00.90.00 UUID : febb75ca:e9d1ce18:f14cc006:f759419a Creation Time : Wed Feb 20 00:57:55 2002 Raid Level : raid1 Used Dev Size : 728515520 (694.77 GiB 746.00 GB) Array Size : 728515520 (694.77 GiB 746.00 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 4 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 2f36a392 - correct Events : 519320 Number Major Minor RaidDevice State this 0 8 4 0 active sync 0 0 8 4 0 active sync 1 1 0 0 1 faulty removed If I read the output correctly everything was removed, because it was faulty. Is there ANY way to see the contents of the largest partition? Or seeing somehow which files are broken? I see that everything is raid1 which is only mirroring, so this should be a normal partition. I am anxious to do anything with mdadm, in fear that I destroy the data on the hard disk. I would be very thankful for any help.

  Read the article

• Why can't my FreeBSD 6.1 (vmware player client under Win7) do DNS in Bridged mode.

  - by Walter Stickle

  I have a 64-bit FreeBSD 6.1 client, running under Windows 7 (64-bit) via VMWare player 3.0, with networking set to bridge mode. DHCP goes fine on boot... I get correct adress/gateway/nameserver info... I have good connectivity to the world in that I can ping any host I can name by IP addr, (including both of the nameservers in resolv.conf,) ...but I can't resolve any names. Inside the Windows box, the network interface has VMWare Bridge Protocol enabled, and the windows side of things has full connectivity. dig replies with: ;; connection timed out; no servers could be reached ...even if I use "dig @server_ip_addr" to point it at a pingable, working nameserver If I set VM networking to NAT mode, I can get outbound connectivity (with happy DNS) but, of course, can't do INBOUND connectivity, which I need. Thoughts?

  Read the article

< Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >