intel graphics - Page 319

LSI SAS 9240-8i on Ubuntu 12.04 Hangs on Modprobe

- by Francois Stark

I used the LSI 9240-8i card on a smaller Intel motherboard with no problems in Ubuntu, with ZFS. However, we rebuilt the server to allow for more disks, using the ASROCK X79 Extreme 11 motherboard. It has 7 PCIe slots, and a LSI 2008 on-board. At first I thought the LSI 9240, when plugged in to PCIe, clashed with the on-board LSI 2008. Every time I plugged in the LSI 9240, modprobe would hang. Then I completely disabled the on-board LSI 2008, and the problem persisted. Last night it booted perfectly ONCE - all LSI cards and connected disks visible... However, all subsequent reboots failed. Both LSI cards' bios scans appear and they both see the disks connected to them, but Ubuntu modprobe hangs. Some selected dmesg lines, with both LSI cards enabled: [ 190.752100] megasas: [ 0]waiting for 1 commands to complete [ 195.772071] megasas: [ 5]waiting for 1 commands to complete [ 200.792079] megasas: [10]waiting for 1 commands to complete [ 205.812078] megasas: [15]waiting for 1 commands to complete [ 210.832037] megasas: [20]waiting for 1 commands to complete [ 215.852077] megasas: [25]waiting for 1 commands to complete [ 220.872072] megasas: [30]waiting for 1 commands to complete [ 225.892078] megasas: [35]waiting for 1 commands to complete [ 230.912086] megasas: [40]waiting for 1 commands to complete [ 235.932075] megasas: [45]waiting for 1 commands to complete [ 240.306157] usb 2-1.5: USB disconnect, device number 7 [ 240.952076] megasas: [50]waiting for 1 commands to complete [ 240.960034] INFO: task modprobe:233 blocked for more than 120 seconds. [ 240.960055] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.960067] modprobe D ffffffff81806200 0 233 146 0x00000004 [ 240.960075] ffff880806ae3b48 0000000000000086 ffff880806ae3ae8 ffffffff8101adf3 [ 240.960083] ffff880806ae3fd8 ffff880806ae3fd8 ffff880806ae3fd8 0000000000013780 [ 240.960090] ffffffff81c0d020 ffff880806acae00 ffff880806ae3b58 ffff880808961720 [ 240.960096] Call Trace: [ 240.960107] [<ffffffff8101adf3>] ? native_sched_clock+0x13/0x80 [ 240.960116] [<ffffffff816579cf>] schedule+0x3f/0x60 [ 240.960137] [<ffffffffa00093f5>] megasas_issue_blocked_cmd+0x75/0xb0 [megaraid_sas] [ 240.960144] [<ffffffff8108aa50>] ? add_wait_queue+0x60/0x60 [ 240.960154] [<ffffffffa000a6c9>] megasas_get_seq_num+0xd9/0x260 [megaraid_sas] [ 240.960164] [<ffffffffa000ab31>] megasas_start_aen+0x31/0x60 [megaraid_sas] [ 240.960174] [<ffffffffa00136f1>] megasas_probe_one+0x69a/0x81c [megaraid_sas] [ 240.960182] [<ffffffff813345bc>] local_pci_probe+0x5c/0xd0 [ 240.960189] [<ffffffff81335e89>] __pci_device_probe+0xf9/0x100 [ 240.960197] [<ffffffff8130ce6a>] ? kobject_get+0x1a/0x30 [ 240.960205] [<ffffffff81335eca>] pci_device_probe+0x3a/0x60 [ 240.960212] [<ffffffff813f5278>] really_probe+0x68/0x190 [ 240.960217] [<ffffffff813f5505>] driver_probe_device+0x45/0x70 [ 240.960223] [<ffffffff813f55db>] __driver_attach+0xab/0xb0 [ 240.960227] [<ffffffff813f5530>] ? driver_probe_device+0x70/0x70 [ 240.960233] [<ffffffff813f5530>] ? driver_probe_device+0x70/0x70 [ 240.960237] [<ffffffff813f436c>] bus_for_each_dev+0x5c/0x90 [ 240.960243] [<ffffffff813f503e>] driver_attach+0x1e/0x20 [ 240.960248] [<ffffffff813f4c90>] bus_add_driver+0x1a0/0x270 [ 240.960255] [<ffffffffa001e000>] ? 0xffffffffa001dfff [ 240.960260] [<ffffffff813f5b46>] driver_register+0x76/0x140 [ 240.960266] [<ffffffffa001e000>] ? 0xffffffffa001dfff [ 240.960271] [<ffffffff81335b66>] __pci_register_driver+0x56/0xd0 [ 240.960277] [<ffffffffa001e000>] ? 0xffffffffa001dfff [ 240.960286] [<ffffffffa001e09e>] megasas_init+0x9e/0x1000 [megaraid_sas] [ 240.960294] [<ffffffff81002040>] do_one_initcall+0x40/0x180 [ 240.960301] [<ffffffff810a82fe>] sys_init_module+0xbe/0x230 [ 240.960307] [<ffffffff81661ec2>] system_call_fastpath+0x16/0x1b [ 240.960314] INFO: task scsi_scan_7:349 blocked for more than 120 seconds.

Read the article

Java, two JPanel on JFrame - Settings JPanel, StartMenu JPanel [on hold]

- by Andy Tyurin

There is my first question and I welcome community! I'm making a simple game and have some problems with Start menu. I have three buttons on my JPanel StartMenu and when I click "Settings" button, new JPanel will be open, but I don't know why buttons from StartMenu JPanel appeared in my Settings JPanel. My "Settings" JPanel has one ugly button "Back" in center and ugly grey background. I made some screens to see a problem. Start Menu JPanel when game launched Settings JPanel when button clicked Settings JPanel when mouse was over settings window There is code of StartMenu class: public class StartMenu extends JPanel { private GameButton startGameButton = new GameButton("Start game"); private GameButton settingsGameButton = new GameButton("Settings"); private GameButton exitGameButton = new GameButton("Exit game"); private Image bgImage = new ImageIcon(getClass().getClassLoader().getResource("ru/andydevs/astraLaserForce/bg.png")).getImage(); private int posX; private int posY; final private int WIDTH=(int)Game.SCREEN_DIMENSION.getWidth()/3; final private int HEIGHT=(int)Game.SCREEN_DIMENSION.getHeight()/2; public StartMenu() { setLayout(new GridBagLayout()); GridBagConstraints c = new GridBagConstraints(); setSize(new Dimension(WIDTH, HEIGHT)); posX=(int)Game.SCREEN_DIMENSION.getWidth()/2-WIDTH/2; posY=(int)Game.SCREEN_DIMENSION.getHeight()/2-HEIGHT/2; setBounds(posX, posY,WIDTH,HEIGHT); c.ipadx=95; c.ipady=15; c.fill = GridBagConstraints.HORIZONTAL; c.insets = new Insets(20,0,0,0); c.gridy=0; add(startGameButton, c); c.gridy=1; c.insets = new Insets(20,0,0,0); System.out.println(settingsGameButton.getWidth()); add(settingsGameButton, c); c.gridy=2; c.insets = new Insets(20,0,0,0); add(exitGameButton, c); settingsGameButton.addActionListener(new ActionListener() { @Override public void actionPerformed(ActionEvent e) { GameOptionsPanel gop = new GameOptionsPanel(); Game.container.add(gop); Game.container.setComponentZOrder(gop, 0); Game.container.revalidate(); Game.container.repaint(); } }); exitGameButton.addActionListener(new ActionListener() { @Override public void actionPerformed(ActionEvent e) { Main.currentGame.stop(); } }); } public void paintComponent(Graphics g) { g.drawImage(bgImage,0,0,WIDTH,HEIGHT,null); } } There is code of Settings JPanel public class GameOptionsPanel extends GamePanel { private GameButton backButton = new GameButton("Back"); private GameOptionsPanel that; public GameOptionsPanel() { super((int) (Game.SCREEN_DIMENSION.getWidth()/3), (int) (Game.SCREEN_DIMENSION.getHeight()/2), new Color(50,50,50)); that=this; setLayout(new GridBagLayout()); GridBagConstraints gbc = new GridBagConstraints(); gbc.fill=gbc.HORIZONTAL; add(backButton); backButton.addActionListener(new ActionListener() { @Override public void actionPerformed(ActionEvent e) { Game.container.remove(that); Game.container.revalidate(); Game.container.repaint(); } }); } } I glad to see some suggestions. Thanks.

Read the article

Ubuntu 12.04 - No sound - HELP!

- by Bruno Tacca

I'm panicking... my sound stopped working after I tried to set-up my notebook speakers, plus two headphone jacks... My idea was to multichannel the sound to 3 channels, built-in speakers, and sound-card 2 headphone jacks. After a couple efforts I did it with 2 channels, speakers and 1 headphone jack, but the other wasn't working. After more tries and tries, sound stop working. I just want my sound back... crying like a baby on the floor. And, if possible, but not necessary, a simple guide to active the 3 channels. xD I will post the diagnosis according to https://help.ubuntu.com/community/SoundTroubleshootingProcedure STEP 1 Did it, still no sound. STEP 2 Did it, still no sound. STEP 3 and #STEP 4 (I removed the log cause there is a limit of characters to be posted.) The log can be found here: https://answers.launchpad.net/ubuntu/+source/alsa-driver/+question/238653 STEP 5 Rebooted, still no sound. STEP 6 Did it. In the Output Devices tab, nothing is muted. I play a music with the Rhythmbox Music Player, I don't hear anything but in the pavucontrol I can see in the Built-in Audio Analog Stereo a sound bar shaking... but, no sound. STEP 7 In alsamixer, AlsaMixer v1.0.25 Card: HDA Intel PCH Chip: Creative CA0132 information View: F3:[Playback] F4: Capture F5: All Item: Headphone [dB gain: 25.00, 25.00] Then, I have 5 columns Headphone, Speaker, PCM, S/PDIF, S/PDIF Default PCM A little weird when I try to mute the Headphone and the Speaker, here what happens: Starting both unmutted, mutting headphone cause speaker being mutted automaticaly. Starting both unmutted, mutting speaker cause headphone being mutted automaticaly. Starting both mutted, possible to unmute both separately. STEP 8 I cannot hear sound on both (headphone and/or speaker). STEP 9 Dual boot... Restarted, windows was with sound at max volume. Restarted again, still no sound at ubuntu. I heard something when ubuntu started, a little noise, then silence again. The sound icon always start mutted, after unmutting, I have no sound. STEP 10 I dont have this command in my ubuntu. STEP 11 Tried at STEP 8, no sound. There are no problem with jumpers or hardware, cause I have sound working on windows. STEP 12 No way to open my alienware and loss the warranty x.X" STEP 13 I think it's loaded, judging my the logs STEP 14 Alienware M17xR4, the hardware is listed in the logs above, at STEP 4. There are two headphone hacks, one with just an headphone printed above, and the other with an headset (with mic) printed, there is a mic jack too, and a spdif (optical) too. STEP 15 I dont want to enable S/PDIF STEP 16 I never used the HDMI output, yet... Thanks in advance. I hope I listed all the information you need.

Read the article

Ubuntu 12.04 lightdm dumps to tty. Cannot start GUI interface when booting off harddrive, but can when booting off usb

- by user72681

When booting, lightdm dumps to tty. No GUI interface works- this is after a fresh install of Ubuntu 12.04 where the GUI interface works when running off the USB. I have an NVIDIA Corporation G98 [Quadro NVS 420] graphics card. After I call startx from the terminal it still doesn't work. I get the following in the Xorg.0.log: [ 327.718] (--) NVIDIA(0): Memory: 262144 kBytes [ 327.718] (--) NVIDIA(0): VideoBIOS: 62.98.6f.00.07 [ 327.718] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 327.718] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 327.756] (--) NVIDIA(0): Connected display device(s) on Quadro NVS 420 at PCI:3:0:0 [ 327.756] (--) NVIDIA(0): none [ 327.756] (EE) NVIDIA(0): No display devices found for this X screen. [ 328.010] (II) UnloadModule: "nvidia" [ 328.010] (II) Unloading nvidia [ 328.010] (II) UnloadModule: "wfb" [ 328.010] (II) Unloading wfb [ 328.010] (II) UnloadModule: "fb" [ 328.010] (II) Unloading fb [ 328.011] (EE) Screen(s) found, but none have a usable configuration. [ 328.011] Fatal server error: [ 328.011] no screens found /var/log/lightdm/lightdm.log [+0.00s] DEBUG: Starting local X display [+0.00s] DEBUG: X server :0 will replace Plymouth [+0.02s] DEBUG: Using VT 7 [+0.02s] DEBUG: Activating VT 7 [+0.02s] DEBUG: Logging to /var/log/lightdm/x-0.log [+0.02s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+0.02s] DEBUG: Launching X Server [+0.02s] DEBUG: Launching process 1074: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none [+0.02s] DEBUG: Waiting for ready signal from X server :0 [+0.02s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+0.02s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+1.38s] DEBUG: Process 1074 exited with return value 1 [+1.38s] DEBUG: X server stopped [+1.38s] DEBUG: Removing X server authority /var/run/lightdm/root/:0 [+1.38s] DEBUG: Releasing VT 7 [+1.38s] DEBUG: Stopping Plymouth, X server failed to start [+1.39s] DEBUG: Display server stopped [+1.39s] DEBUG: Stopping display [+1.39s] DEBUG: Display stopped [+1.39s] DEBUG: Stopping X local seat, failed to start a display [+1.39s] DEBUG: Stopping seat [+1.39s] DEBUG: Seat stopped [+1.39s] DEBUG: Required seat has stopped [+1.39s] DEBUG: Stopping display manager [+1.39s] DEBUG: Display manager stopped [+1.39s] DEBUG: Stopping daemon [+1.39s] DEBUG: Exiting with return value 1 /var/log/lightdm/x-0.log X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-31-server x86_64 Ubuntu Current Operating System: Linux oorn 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=b25ab072-077d-40f1-95a4-c7fd66acd2f0 ro reboot=pci quiet splash vt.handoff=7 Build Date: 07 May 2012 11:43:21PM xorg-server 2:1.11.4-0ubuntu10.2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.24.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 27 12:51:45 2012 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) NVIDIA(0): No display devices found for this X screen. (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Server terminated with error (1). Closing log file.

Read the article

Where's My Windows Azure Subscriptions

- by Shaun

Originally posted on: http://geekswithblogs.net/shaunxu/archive/2013/11/03/wheres-my-windows-azure-subscriptions.aspxYesterday when I opened Windows Azure manage portal I found some resources were missed. I checked the website for those missed cloud service and they are still live. Then I checked my billing history but didn't found any problem. When I back to the portal I found that all of those resource are under my MSDN subscription. So I remembered that if this is related with the recently Windows Azure platform update. This feature named "Enterprise Management", which provides the ability to manage your organization in a directory which is hosted entirely in the cloud, or alternatively kept in sync with an on-premises Windows Server Active Directory solution. By default, all existing windows azure account would have a default Windows Azure Active Directory (a.k.a. WAAD) associated. In the address bar I can find the default login WAAD of my account, which is "microsoft.onmicrosoft.com". To change the WAAD we can click "subscriptions" on top of the manage portal, select the active directory from the list of "filter by directory" and select the subscription we want to see, then press "apply". As you can see, the subscription under my MSDN was located in a WAAD named "beijingtelecom.onmicrosoft.com". This is because when Microsoft applied this feature, they will check if you have an existing WAAD in your subscription. If not, it will create a new one, otherwise it will use your WAAD and move your subscription into this directory. Since I created a WAAD for test several months ago, this subscription was moved to this directory. To change the subscription's directory is simple. First we need to create a new WAAD with the name we preferred. As below I created a new directory named "shaunxu". Then select "settings" from the left navigation bar, select the subscription we wanted to change and click "edit directory". You don't have the permission to edit/change directory unless your Microsoft Account is the service administrator of this subscription. Then in the popup window, select the WAAD you want to change and press "next". All done. You need to log off and log in the portal then your subscription will be in the directory you wanted. And after these steps I can view my resources in this subscription. Summary In this post I described how to change subscriptions into a new directory. With this new feature we can manage our Windows Azure subscription more flexible. But there are something we need keep in mind. 1. Only the service administrator could be able to move subscription. 2. Currently there's no way for us to see our Windows Azure services in more than one directory at the same time. Like me, I can see my services under "shaunxu.onmicrosoft.com" and I must change the filter directory from the "subscriptions" menu to see other services under "microsoft.onmicrosoft.com". 3. Currently we cannot delete an existing WAAD. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Countdown of Top 10 Reasons to Never Ever Use a Pie Chart

- by Tony Wolfram

Pie charts are evil. They represent much of what is wrong with the poor design of many websites and software applications. They're also innefective, misleading, and innacurate. Using a pie chart as your graph of choice to visually display important statistics and information demonstrates either a lack of knowledge, laziness, or poor design skills. Figure 1: A floating, tilted, 3D pie chart with shadow trying (poorly)to show usage statistics within a graphics application. Of course, pie charts in and of themselves are not evil. This blog is really about designers making poor decisions for all the wrong reasons. In order for a pie chart to appear on a web page, somebody chose it over the other alternatives, and probably thought they were doing the right thing. They weren't. Using a pie chart is almost always a bad design decision. Figure 2: Pie Chart from an Oracle Reports User Guide A pie chart does not do the job of effectively displaying information in an elegant visual form. Being circular, they use up too much space while not allowing their labels to line up. Bar charts, line charts, and tables do a much better job. Expert designers, statisticians, and business analysts have documented their many failings, and strongly urge software and report designers not to use them. It's obvious to them that the pie chart has too many inherent defects to ever be used effectively. Figure 3: Demonstration of how comparing data between multiple pie charts is difficult. Yet pie charts are still used frequently in today's software applications, financial reports, and websites, often on the opening page as a symbol of how the data inside is represented. In an attempt to get a flashy colorful graphic to break up boring text, designers will often settle for a pie chart that looks like pac man, a colored spinning wheel, or a 3D floating alien space ship. Figure 4: Best use of a pie chart I've found yet. Why is the pie chart so popular? Through its constant use and iconic representation as the classic chart, the idea persists that it must be a good choice, since everyone else is still using it. Like a virus or an urban legend, no amount of vaccine or debunking will slow down the use of pie charts, which seem to be resistant to logic and common sense. Even the new iPad from Apple showcases the pie chart as one of its options. Figure 5: Screen shot of new iPad showcasing pie charts. Regardless of the futility in trying to rid the planet of this often used poor design choice, I now present to you my top 10 reasons why you should never, ever user a pie chart again. Number 10 - Pie Charts Just Don't Work When Comparing Data Number 9 - You Have A Better Option: The Sorted Horizontal Bar Chart Number 8 - The Pie Chart is Always Round Number 7 - Some Genius Will Make It 3D Number 6 - Legends and Labels are Hard to Align and Read Number 5 - Nobody Has Ever Made a Critical Decision Using a Pie Chart Number 4 - It Doesn't Scale Well to More Than 2 Items Number 3 - A Pie Chart Causes Distortions and Errors Number 2 - Everyone Else Uses Them: Debunking the "Urban Legend" of Pie Charts Number 1 - Pie Charts Make You Look Stupid and Lazy

Read the article

How to fix OpenGL Co-ordinate System in SFML?

- by Marc Alexander Reed

My OpenGL setup is somehow configured to work like so: (-1, 1) (0, 1) (1, 1) (-1, 0) (0, 0) (1, 0) (-1, -1) (0, -1) (1, -1) How do I configure it so that it works like so: (0, 0) (SW/2, 0) (SW, 0) (0, SH/2) (SW/2, SH/2) (SW, SH/2) (0, SH) (SW/2, SH) (SW/2, SH) SW as Screen Width. SH as Screen Height. This solution would have to fix the problem of I can't translate significantly(1) on the Z axis. Depth doesn't seem to be working either. The Perspective code I'm using is that of my WORKING GLUT OpenGL code which has a cool 3d grid and camera system etc. But my OpenGL setup doesn't seem to work with SFML. Help me guys. :( Thanks in advance. :) #include <SFML/Window.hpp> #include <SFML/Graphics.hpp> #include <SFML/Audio.hpp> #include <SFML/Network.hpp> #include <SFML/OpenGL.hpp> #include "ResourcePath.hpp" //Mac-only #define _USE_MATH_DEFINES #include <cmath> double screen_width = 640.f; double screen_height = 480.f; int main (int argc, const char **argv) { sf::ContextSettings settings; settings.depthBits = 24; settings.stencilBits = 8; settings.antialiasingLevel = 2; sf::Window window(sf::VideoMode(screen_width, screen_height, 32), "SFML OpenGL", sf::Style::Close, settings); window.setActive(); glEnable(GL_DEPTH_TEST); glEnable(GL_LIGHTING); glEnable(GL_LIGHT0); glEnable(GL_NORMALIZE); glEnable(GL_COLOR_MATERIAL); glShadeModel(GL_SMOOTH); glViewport(0, 0, screen_width, screen_height); glMatrixMode(GL_PROJECTION); glLoadIdentity(); //glOrtho(0.0f, screen_width, screen_height, 0.0f, -100.0f, 100.0f); gluPerspective(45.0f, (double) screen_width / (double) screen_height , 0.f, 100.f); glClearColor(0.f, 0.f, 1.f, 0.f); //blue while (window.isOpen()) { sf::Event event; while (window.pollEvent(event)) { switch (event.type) { case sf::Event::Closed: window.close(); break; } switch (event.key.code) { case sf::Keyboard::Escape: window.close(); break; case 'W': break; case 'S': break; case 'A': break; case 'D': break; } } glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); glTranslatef(0.f, 0.f, 0.f); glPushMatrix(); glBegin(GL_QUADS); glColor3f(1.f, 0.f, 0.f); glVertex3f(-1.f, 1.f, 0.f); glColor3f(0.f, 1.f, 0.f); glVertex3f(1.f, 1.f, 0.f); glColor3f(1.f, 0.f, 1.f); glVertex3f(1.f, -1.f, 0.f); glColor3f(0.f, 0.f, 1.f); glVertex3f(-1.f, -1.f, 0.f); glEnd(); glPopMatrix(); window.display(); } return EXIT_SUCCESS; }

Read the article

Realtek RTL8111/8168B wired network doesn't work anymore

- by Radar4002

This sounds like it's a common problem upgrading 11.04, but I am having trouble finding a common solution, and one that will work for me. I just applied updates via the update manager and now my wired network connection is down. I know Ubuntu network settings is the issue, because I have a dual-boot with Win 7 and my network/internet is fine on Win 7. I don't know too much about networking, so what can I do to trouble shoot this issue? I can choose an older grub version, 2.6.38-8 instead of 2.6.38-11 and this does not resolve the issue. Here is my lspci result: 00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part (rev 02) 00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) 00:04.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) 00:05.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) 00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) 00:07.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port G) 00:09.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port H) 00:0a.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port A) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40) 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:15.0 PCI bridge: ATI Technologies Inc Device 43a0 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 07:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 07:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 08:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) Here is my sudo lshw -class network: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 03 serial: 6c:f0:49:e7:72:e8 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:40 ioport:9e00(size=256) memory:fceff000-fcefffff memory:fcef8000-fcefbfff memory:fce00000-fce1ffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth1 version: 03 serial: 6c:f0:49:e7:72:ea size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:8e00(size=256) memory:fddff000-fddfffff memory:fddf8000-fddfbfff memory:fdd00000-fdd1ffff

Read the article

Wireless is detected, but not connecting. Ethernet works. How to correct the wireless address?

- by Lucas

I am running Ubuntu 14.04 with cable internet, and my wireless is detected and connected, but I cannot connect to the internet. I know the problem is with my machine because other machines are connecting to the same router just fine. I can connect via ethernet just fine as well. Here are some notable tests: ping 192.168.0.105 works with 0% packet loss, but ping 192.168.0.1 has 100% packet loss. When I plug in my ethernet, ping 192.168.0.1 works with 0% packet loss. My wireless name is tg, and the router ip is 192.168.0.1 (where I can enter username and password). I suspect that I need to change my wireless address from 192.168.0.105 to 192.168.0.1. Any suggestions on how to proceed? extra info: [lucas@lucas-ThinkPad-W520]/home/lucas$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"tg" Mode:Managed Frequency:2.462 GHz Access Point: 00:02:6F:83:F8:F4 Bit Rate=1 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:52 Invalid misc:166 Missed beacon:0 [lucas@lucas-ThinkPad-W520]/home/lucas$ ifconfig eth0 Link encap:Ethernet HWaddr f0:de:f1:b2:53:53 inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f2de:f1ff:feb2:5353/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:980003 errors:0 dropped:0 overruns:0 frame:0 TX packets:498384 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1320506168 (1.3 GB) TX bytes:59780591 (59.7 MB) Interrupt:20 Memory:f3a00000-f3a20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:21927 errors:0 dropped:0 overruns:0 frame:0 TX packets:21927 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1781719 (1.7 MB) TX bytes:1781719 (1.7 MB) wlan0 Link encap:Ethernet HWaddr 24:77:03:29:8f:dc inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::2677:3ff:fe29:8fdc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11828 errors:0 dropped:0 overruns:0 frame:0 TX packets:15444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4855662 (4.8 MB) TX bytes:2250585 (2.2 MB) [lucas@lucas-ThinkPad-W520]/home/lucas$ lspci -nn | grep 0280 03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) [lucas@lucas-ThinkPad-W520]/home/lucas$ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no with ethernet unplugged: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0 with ethernet plugged in: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 [lucas@lucas-ThinkPad-W520]/home/lucas$ nm-tool NetworkManager Tool State: connected (global) - Device: wlan0 [tg] ---------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: no HW Address: 24:77:03:29:8F:DC Capabilities: Speed: 52 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) tatum: Infra, 40:8B:07:D8:A5:04, Freq 2437 MHz, Rate 54 Mb/s, Strength 42 W PA WPA2 ums: Infra, 00:20:A6:72:52:BF, Freq 2437 MHz, Rate 54 Mb/s, Strength 59 Alpha 40: Infra, 28:CF:E9:86:59:5D, Freq 5260 MHz, Rate 54 Mb/s, Strength 30 W PA WPA2 thepromiselan: Infra, 58:6D:8F:51:E5:54, Freq 2452 MHz, Rate 54 Mb/s, Strength 34 $ PA WPA2 xfinitywifi: Infra, 06:1D:D5:84:27:A0, Freq 2437 MHz, Rate 54 Mb/s, Strength 52 *tg: Infra, 00:02:6F:83:F8:F4, Freq 2462 MHz, Rate 54 Mb/s, Strength 73 W PA2 ums: Infra, 00:20:A6:A1:9F:25, Freq 2452 MHz, Rate 54 Mb/s, Strength 44 BRIAN-PC_Network:Infra, 20:AA:4B:DD:93:D6, Freq 2462 MHz, Rate 54 Mb/s, Strength 35 W PA2 HOME-C0F8: Infra, 44:32:C8:D2:C0:F8, Freq 2412 MHz, Rate 54 Mb/s, Strength 40 W PA WPA2 abcsexy: Infra, 28:28:5D:27:5D:85, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 W PA WPA2 IPv4 Settings: Address: 192.168.0.105 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: F0:DE:F1:B2:53:53 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1

Read the article

How do I get sound output on HDMI without the need to start X?

- by Magnus Hoff

I have a headless machine connected to my sound system, and I am using it to run a music playing daemon that I control over the network. (Among other things) However, I can't seem to be able to have sound come out of my speakers without running X. I am running pulse audio in a system wide instance and my daemon is not running within X. Nevertheless, when my daemon is playing music without me hearing it, I can fix it by running startx in an unrelated session. After X starts, I can hear the sound. The sound disappears again if I kill the X server. Interestingly/annoyingly, the sound also stops after X has been running for a few minutes. This could possibly be because of a screen saver of some sort, but I haven't been able to verify or falsify this theory. So my current workaround is to ssh into the box whenever I want music and startx, and restart it every fifteen minutes or so. I'd like to do better. I have been able to verify the following: Adjustments in alsamixer have no effect on this problem. The relevant output channel is never muted In alsamixer, I can see no difference between when the sound is working and when it isn't Nothing is muted in pactl list There is no difference in the output from pactl list between before starting X and after it's started. (Except the identifier of the pactl instance connected to pulse, which is different each time you run pactl) The user running the music daemon is a member of the groups audio, pulse and pulse-access The music daemon program does not report any error messages and acts as if it is playing the music like it should Some form of dbus daemon is running. ps aux|grep dbus reports dbus-daemon --system --fork --activation=upstart before and after I have started X Some details about my hardware: Motherboard: http://www.asus.com/Motherboards/AT5IONTI_DELUXE/ Sound chip: Nvidia GPU 0b HDMI/DP (from alsamixer) Using HDMI for output (Machine also has an Intel Realtek ALC887 that I am not using) Output of lsmod: Module Size Used by deflate 12617 0 zlib_deflate 27139 1 deflate ctr 13201 0 twofish_generic 16635 0 twofish_x86_64_3way 25287 0 twofish_x86_64 12907 1 twofish_x86_64_3way twofish_common 20919 3 twofish_generic,twofish_x86_64_3way,twofish_x86_64 camellia 29348 0 serpent 29125 0 blowfish_generic 12530 0 blowfish_x86_64 21466 0 blowfish_common 16739 2 blowfish_generic,blowfish_x86_64 cast5 25112 0 des_generic 21415 0 xcbc 12815 0 rmd160 16744 0 bnep 18281 2 rfcomm 47604 12 sha512_generic 12796 0 crypto_null 12918 0 parport_pc 32866 0 af_key 36389 0 ppdev 17113 0 binfmt_misc 17540 1 nfsd 281980 2 ext2 73795 1 nfs 436929 1 lockd 90326 2 nfsd,nfs fscache 61529 1 nfs auth_rpcgss 53380 2 nfsd,nfs nfs_acl 12883 2 nfsd,nfs sunrpc 255224 16 nfsd,nfs,lockd,auth_rpcgss,nfs_acl btusb 18332 2 vesafb 13844 2 pl2303 17957 1 ath3k 12961 0 bluetooth 180153 24 bnep,rfcomm,btusb,ath3k snd_hda_codec_hdmi 32474 4 nvidia 11308613 0 ftdi_sio 40679 1 usbserial 47113 6 pl2303,ftdi_sio psmouse 97485 0 snd_hda_codec_realtek 224173 1 snd_hda_intel 33719 5 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel serio_raw 13211 0 snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_pcm 97275 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 79041 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device asus_atk0110 18078 0 mac_hid 13253 0 jc42 13948 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm coretemp 13554 0 i2c_i801 17570 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62154 0 Any ideas? What does X do that's so important?

Read the article

xna orbit camera troubles

- by user17753

I have a Model named cube to which I load in LoadContent(): cube = Content.Load<Model>("untitled");. In the Draw Method I call DrawModel: private void DrawModel(Model m, Matrix world) { foreach (ModelMesh mesh in m.Meshes) { foreach (BasicEffect effect in mesh.Effects) { effect.EnableDefaultLighting(); effect.View = camera.View; effect.Projection = camera.Projection; effect.World = world; } mesh.Draw(); } } camera is of the Camera type, a class I've setup. Right now it is instantiated in the initialization section with the graphics aspect ratio and the translation (world) vector of the model, and the Draw loop calls the camera.UpdateCamera(); before drawing the models. class Camera { #region Fields private Matrix view; // View Matrix for Camera private Matrix projection; // Projection Matrix for Camera private Vector3 position; // Position of Camera private Vector3 target; // Point camera is "aimed" at private float aspectRatio; //Aspect Ratio for projection private float speed; //Speed of camera private Vector3 camup = Vector3.Up; #endregion #region Accessors /// <summary> /// View Matrix of the Camera -- Read Only /// </summary> public Matrix View { get { return view; } } /// <summary> /// Projection Matrix of the Camera -- Read Only /// </summary> public Matrix Projection { get { return projection; } } #endregion /// <summary> /// Creates a new Camera. /// </summary> /// <param name="AspectRatio">Aspect Ratio to use for the projection.</param> /// <param name="Position">Target coord to aim camera at.</param> public Camera(float AspectRatio, Vector3 Target) { target = Target; aspectRatio = AspectRatio; ResetCamera(); } private void Rotate(Vector3 Axis, float Amount) { position = Vector3.Transform(position - target, Matrix.CreateFromAxisAngle(Axis, Amount)) + target; } /// <summary> /// Resets Default Values of the Camera /// </summary> private void ResetCamera() { speed = 0.05f; position = target + new Vector3(0f, 20f, 20f); projection = Matrix.CreatePerspectiveFieldOfView(MathHelper.PiOver4, aspectRatio, 0.5f, 100f); CalculateViewMatrix(); } /// <summary> /// Updates the Camera. Should be first thing done in Draw loop /// </summary> public void UpdateCamera() { Rotate(Vector3.Right, speed); CalculateViewMatrix(); } /// <summary> /// Calculates the View Matrix for the camera /// </summary> private void CalculateViewMatrix() { view = Matrix.CreateLookAt(position,target, camup); } I'm trying to create the camera so that it can orbit the center of the model. For a test I am calling Rotate(Vector3.Right, speed); but it rotates almost right but gets to a point where it "flips." If I rotate along a different axis Rotate(Vector3.Up, speed); everything seems OK in that direction. So I guess, can someone tell me what I'm not accounting for in the above code I wrote? Or point me to an example of an orbiting camera that can be fixed on an arbitrary point?

Read the article

Impressions of my ASUS eee slate EP121 - Dual core 4GB, 64GB SSD

- by tonyrogerson

This thing is lovely, very nice bluetooth keyboard that has nice feedback on the keypress, there is no mouse but you can use the stylus or get yourself a bluetooth mouse, me, I've opted for a Microsoft ARC mouse which is a delight to use, the USB doors are a pain to open for the first time if like me you don't have any finger nails. It came as a suprise that the slate shows four processors, Dual Core with multi-threading, I didn't really look at the processor I was more interested in the amount of memory and the SSD; you don't get the full 4GB even with the 64 bit version of Windows 7 installed (which I immediately upgraded to Ultimate through my MSDN subscription). The box is extremely responsive - extremely, it loads Winword in literally a second. I've got office 2010 and onenote 2010 on there now; one problem is that on applying all (43) windows updates since the upgrade the machine is still sat on step 3 of 3 on the start up configuring updates screen after about an hour, you can't turn this machine off without using a paper clip to reset it and as I have just found you need a paper clip :). Installing Windows 7 SP1 was effortless. One of the first things I did on it was to reduce the size of the font, by default its set at 125%, my eye sight is ok :) so I've set that back down. Amazon Kindle for the PC works really well, plenty of text on the screen when viewed portrait, the case it comes with also allows the slate to stand up in various positions - portrait, horizontal - seems stable enough. The wireless works well, seems to have a better signal than my other two laptop machines which is good news. The gadget passed the pose test at work :). I use offline files to keep a copy of all my work stuff locally, I'm not sure what it is, well, its probably my server but whenever I try and sync it runs for a couple of minutes then fails with network name no longer contactable, funnily enough its fine from my big laptop so I can only guess this may be a driver type issue on the EP121 itself - very odd and very annoying. I do a lot of presenting and need to plug into a VGA project because most sites that's all that is offered, the EP121 has a mini-hdmi output which is great except for this scenario, hdmi is digital, vga is analogue, you will struggle to find a cost effective solution, I found HDFury and also a device HP do, however, a better solution appears to be getting a USB graphics adapter for instance the one I've ordered is the ClimaxDigital USB 2.0 to DVI,VGA or HDMI Adaptor which gives everything I need - VGA and DVI output and great resolution as well - ok, so fingers crossed because I'm presenting next Wednesday in Edinburgh and not taking my 300kg lenovo w700 (I'm sure my back just sighed in relief) - it certainly works really well on my LED TV, the install was simple - it just works! One of the several reasons for buying this piece of kit was to use it on my LED TV to remote into my main machine to check stuff whilst sat in my living room, also to watch webcasts and lecture videos in comfort away from my office, because of the wireless speed and limitation I'm opting for a USB network adapter from Belkin - that will also allow me to take advantage of my home gigabit network, there are only 2 usb ports on the slate so I'm going to knock up a hub so connecting it in is straight forward and simple, I'm also going to purchase a second power supply so I don't have to faff about with that either.I now have the developer x64 edition of SQL Server 2008 R2, yes everything :) - about 16GB left to play with on the machine now but that will be fine, I'll put AdventureWorks on there so I can play and demo stuff which is all I'm after from this, my development machine is significantly more powerful and meets my storage needs too.Travel test this weekend and next week, I'm in Dundee for my final exam for the masters degree.

Read the article

How to get bearable 2D and 3D performance on AMD Radeon HD 6950?

- by l0b0

I have had an AMD Radeon HD 6950 (i.e., Cayman series) for a couple years now, and I have tried a lot of combinations of drivers and settings with terrible results. I'm completely at a loss as to how to proceed. The open source driver has much better 2D performance, but it offloads all OpenGL rendering to the CPU. What I've tried so far: All the latest stable Ubuntu releases in the period, plus one Linux Mint release. All the latest stable AMD Catalyst Proprietary Display Drivers, and currently 13.1. The unofficial wiki installation instructions for every Ubuntu version and the semi-official Ubuntu instructions. All the tips and tweaks I could find for Minecraft (Optifine, reducing settings to minimum), VLC (postprocessing at minimum, rendering at native video size), Catalyst Control Center (flipped every lever in there) and X11 (some binary toggles I can no longer remember). Results: Typically 13-15 FPS in Minecraft, 30 max (100+ in Windows with the same driver version). Around 10 FPS in Team Fortress 2 using the official Steam client. Choppy video playback, in Flash and with VLC. CPU use goes through the roof when rendering video (150% for 1080p on YouTube in Chromium, 100% for 1080p H264 in VLC). glxgears shows 12.5 FPS when maximized. fgl_glxgears shows 10 FPS when maximized. Hardware details from lshw: Motherboard ASUS P6X58D-E CPU Intel Core i7 CPU 950 @ 3.07GHz (never overclocked; 64 bit) 6 GB RAM Video card product "Cayman PRO [Radeon HD 6950]", vendor "Hynix Semiconductor (Hyundai Electronics)" 2 x 1920x1200 monitors, both connected with HDMI. I feel I must be missing something absolutely fundamental here. Is there no accelerated support for anything on 64-bit architectures? Does a dual monitor completely mess up the driver? $ fglrxinfo display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: AMD Radeon HD 6900 Series OpenGL version string: 4.2.11995 Compatibility Profile Context $ glxinfo | grep 'direct rendering' direct rendering: Yes I am currently using the open source driver, with the following results: Full frame rate and low CPU load when playing 1080p video. Black screen (but music in the background) in Team Fortress 2. Similar performance in Minecraft as the Catalyst driver. In hindsight obvious, since both end up offloading the rendering to the CPU. My /var/log/Xorg.0.log after upgrading to AMD Catalyst 13.1. Some possibly important lines: (WW) Falling back to old probe method for fglrx (WW) fglrx: No matching Device section for instance (BusID PCI:0@3:0:1) found The generated xorg.conf. The disabled "monitor" 0-DFP9 is actually an A/V receiver, which sometimes confuses the monitor drivers when turned on/off (but not in Windows). All three "monitor" devices are connected with HDMI. Edit: Chris Carter's suggestion to use the xorg-edgers PPA (Catalyst 13.1) resulted in some improvement, but still pretty bad performance overall: Minecraft stabilizes at 13-17 FPS, but at least the CPU load is "only" at 45-60%. Still 150% CPU use for 1080p video rendering on YouTube in Chromium. Massive improvement for 1080p H264 in VLC: 40-50% CPU use and no visible jitter glxgears performance about doubled to 25-30 FPS when maximized. fgl_glxgears still at ~10 FPS when maximized.

Read the article

Free RAM disappears - Memory leak?

- by Izzy

On a fresh started system, free reports about 1.5G used RAM (8G RAM alltogether, Ubuntu 12.04 with lightdm and plasma desktop, one konsole window started). Having the apps running I use, it still consumes not more than 2G. However, having the system running for a couple of days, more and more of my free RAM disappears -- without showing up in the list of used apps: while smem --pie=name reports less than 20% used (and 80% being available), everything else says differently. free -m for example reports on about day 7: total used free shared buffers cached Mem: 7459 7013 446 0 178 997 -/+ buffers/cache: 5836 1623 Swap: 9536 296 9240 (so you can see, it's not the buffers or the cache). Today this finally ended with the system crashing completely: the windows manager being gone, apps "hanging in the air" (frameless) -- and a popup notifying me about "too many open files". Syslog reports: kernel: [856738.020829] VFS: file-max limit 752838 reached So I closed those applications I was able to close, and killed X using Ctrl-Alt-backspace. X tried to come up again after that with failsafeX, but was unable to do so as it could no longer detect its configuration. So I switched to a console using Ctrl-Alt-F2, captured all information I could think of (vmstat, free, smem, proc/meminfo, lsof, ps aux), and finally rebooted. X again came up with failsafeX; this time I told it to "recover from my backed-up configuration", then switched to a console and successfully used startx to bring up the graphical environment. I have no real clue to what is causing this issue -- though it must have to do either with X itself, or with some user processes running on X -- as after killing X, free -m output looked like this: total used free shared buffers cached Mem: 7459 2677 4781 0 62 419 -/+ buffers/cache: 2195 5263 Swap: 9536 59 9477 (~3.5GB being freed) -- to compare with the output after a fresh start: total used free shared buffers cached Mem: 7459 1483 5975 0 63 730 -/+ buffers/cache: 689 6769 Swap: 9536 0 9536 Two more helpful outputs are provided by memstat -u. Shortly before the crash: User Count Swap USS PSS RSS mail 1 0 200 207 616 whoopsie 1 764 740 817 2300 colord 1 3200 836 894 2156 root 62 70404 352996 382260 569920 izzy 80 177508 1465416 1519266 1851840 After having X killed: User Count Swap USS PSS RSS mail 1 0 184 188 356 izzy 1 1400 708 739 1080 whoopsie 1 848 668 826 1772 colord 1 3204 804 888 1728 root 62 54876 131708 149950 267860 And after a restart, back in X: User Count Swap USS PSS RSS mail 1 0 212 217 628 whoopsie 1 0 1536 1880 5096 colord 1 0 3740 4217 7936 root 54 0 148668 180911 345132 izzy 47 0 370928 437562 915056 Edit: Just added two graphs from my monitoring system. Interesting to see: everytime when there's a "jump" in memory consumption, CPU peaks as well. Just found this right now -- and it reminds me of another indicator pointing to X itself: Often when returning to my machine and unlocking the screen, I found something doing heavvy work on my CPU. Checking with top, it always turned out to be /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none. So after this long explanation, finally my questions: What could be the possible causes? How can I better identify involved processes/applications? What steps could be taken to avoid this behaviour -- short from rebooting the machine all X days? I was running 8.04 (Hardy) for about 5 years on my old machine, never having experienced the like (always more than 100 days uptime, before rebooting for e.g. kernel updates). This now is a complete new machine with a fresh install of 8.04. In case it matters, some specs: AMD A4-3400 APU with Radeon(tm) HD Graphics, using the open-source ati/radeon driver (so no fglrx installed), 8GB RAM, WDC WD1002FAEX-0 hdd (1TB), Asus F1A75-V Evo mainboard. Ubuntu 12.04 64-bit with KDE4/Plasma. Apps usually open more or less permanently include Evolution, Firefox, konsole (with Midnight Commander running inside, about 4 tabs), and LibreOffice -- plus occasionally Calibre, Gimp and Moneyplex (banking software I'm already using for almost 20 years now, in a version which did fine on Hardy).

Read the article

Unable to make properly work the Ralink rt3090 wifi card on my Lenovo B575 with Kubuntu 12.04 64bit

- by Sebastien

I look and tried many solution from many thread but I still unable to make this wifi card work properly (very slow, unable to connect to some wifi spot, etc.). I tried to compile the driver from the ralink website but it doesn't work. Tried to blacklist many mod, withou any result. So here are some command results, hope their help you help me: lspci sebastien@sebastien-portable:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Wrestler [Radeon HD 6310] 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) 00:15.2 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB900 PCI to PCI bridge (PCIE port 2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 03:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe lsmod sebastien@sebastien-portable:~$ lsmod Module Size Used by rt2800pci 18715 0 arc4 12529 2 rt2800lib 58925 1 rt2800pci crc_ccitt 12667 1 rt2800lib rt2x00pci 14577 1 rt2800pci rt2x00lib 55301 3 rt2800pci,rt2800lib,rt2x00pci mac80211 506816 3 rt2800lib,rt2x00pci,rt2x00lib cfg80211 205544 2 rt2x00lib,mac80211 eeprom_93cx6 12725 1 rt2800pci rt2860sta 864748 0 snd_hda_codec_conexant 62128 1 snd_hda_codec_hdmi 32474 1 uvcvideo 72627 0 rts5139 351143 0 snd_hda_intel 33773 4 videodev 98259 1 uvcvideo snd_hda_codec 127706 3 snd_hda_codec_conexant,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec psmouse 87692 0 v4l2_compat_ioctl32 17128 1 videodev serio_raw 13211 0 k10temp 13166 0 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec sp5100_tco 13791 0 i2c_piix4 13301 0 snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi ideapad_laptop 18234 0 sparse_keymap 13890 1 ideapad_laptop rfcomm 47604 0 joydev 17693 0 snd_seq_midi_event 14899 1 snd_seq_midi bnep 18281 2 bluetooth 180104 10 rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 18 snd_hda_codec_conexant,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd mac_hid 13253 0 snd_page_alloc 18529 2 snd_hda_intel,snd_pcm lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid r8169 62099 0 radeon 804372 4 video 19596 0 wmi 19256 0 ttm 76949 1 radeon drm_kms_helper 46978 1 radeon drm 242038 6 radeon,ttm,drm_kms_helper i2c_algo_bit 13423 1 radeon iwconfig sebastien@sebastien-portable:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"4CE6763F0E0A" Mode:Managed Frequency:2.452 GHz Access Point: 4C:E6:76:3F:0E:0A Bit Rate=54 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:100 Missed beacon:0 eth0 no wireless extensions.

Read the article

Planning development when academic research is involved

- by Another Anonymous User

Dear fellow programmers, how do you do "software planning" when academic research is involved? And, on a side note, how do you convince your boss that writing software is not like building a house and it's more like writing a novel? The gory details are below. I am in charge of a small dev team working in a research lab. We started developing a software with the purpose of going public one day (i.e. sell and make money off that). Such software depends on, amongst other things, at least two independent research lines: that is, there are at least two Ph.D. candidates that will, hopefully, one day come out with a working implementation of what we need. The main software depends also on other, more concrete resources that we as developers can take care of: graphics rendering, soft bodies deformation, etc. My boss asked me to write the specifications, requirements AND a bloody GANTT chart of the entire project. Faced with the fact that I don't have a clue about the research part, and that such research is fundamental for the software, he said "make assumptions." For the clarity of the argument, he is a professor whose Ph.D. students should come up with the research we need. And he comes from a strictly engineering background: plan everything first, write down specifications and only then write down code that "it's the last part". What I am doing now: I broke down the product in features; each 'feature' is, de facto, a separate product; Each feature is built on top of the previous one; Once a feature (A) has a working prototype the team can start working on the next feature (B), while QA for is being done for A (if money allows, more people can be brought in, etc.); Features that depend on research will come last: by then, hopefully, the research part will be completed (when is still a big question) ; Also, I set the team to use SCRUM for the development of 'version 1.0', due in a few months. This deadline could be set based on reasonable assumptions: we listed all required features, we counted our availability, and we gave a reasonable estimate. So my questions, again, are: How do I make my boss happy while at the same time get something out the door? How do I write specifications for something we -the developers- have no clue whether it's possible to do or not? (We still haven't decided which libraries to use for some tasks; we'll do so when we'll need to) How do I get the requirements for that, given that there are yet no clients nor investors, just lots of interests and promises? How do I get peace in the world? I am sure at least one of my questions will be answered :) ps: I am writing this anonymously since a potential investor might backfire if this is discovered. Hope you'll understand. However I must say I do not like this mentality of 'hiding the truth': this program will likely benefit many, and not being able to talk openly about this (with my name and my reputation attached) feels like censorship. But alas, I care more about your suggestions now.

Read the article

How the number of indexes built on a table can impact performances?

- by Davide Mauri

We all know that putting too many indexes (I’m talking of non-clustered index only, of course) on table may produce performance problems due to the overhead that each index bring to all insert/update/delete operations on that table. But how much? I mean, we all agree – I think – that, generally speaking, having many indexes on a table is “bad”. But how bad it can be? How much the performance will degrade? And on a concurrent system how much this situation can also hurts SELECT performances? If SQL Server take more time to update a row on a table due to the amount of indexes it also has to update, this also means that locks will be held for more time, slowing down the perceived performance of all queries involved. I was quite curious to measure this, also because when teaching it’s by far more impressive and effective to show to attended a chart with the measured impact, so that they can really “feel” what it means! To do the tests, I’ve create a script that creates a table (that has a clustered index on the primary key which is an identity column) , loads 1000 rows into the table (inserting 1000 row using only one insert, instead of issuing 1000 insert of one row, in order to minimize the overhead needed to handle the transaction, that would have otherwise ), and measures the time taken to do it. The process is then repeated 16 times, each time adding a new index on the table, using columns from table in a round-robin fashion. Test are done against different row sizes, so that it’s possible to check if performance changes depending on row size. The result are interesting, although expected. This is the chart showing how much time it takes to insert 1000 on a table that has from 0 to 16 non-clustered indexes. Each test has been run 20 times in order to have an average value. The value has been cleaned from outliers value due to unpredictable performance fluctuations due to machine activity. The test shows that in a table with a row size of 80 bytes, 1000 rows can be inserted in 9,05 msec if no indexes are present on the table, and the value grows up to 88 (!!!) msec when you have 16 indexes on it This means a impact on performance of 975%. That’s *huge*! Now, what happens if we have a bigger row size? Say that we have a table with a row size of 1520 byte. Here’s the data, from 0 to 16 indexes on that table: In this case we need near 22 msec to insert 1000 in a table with no indexes, but we need more that 500msec if the table has 16 active indexes! Now we’re talking of a 2410% impact on performance! Now we can have a tangible idea of what’s the impact of having (too?) many indexes on a table and also how the size of a row also impact performances. That’s why the golden rule of OLTP databases “few indexes, but good” is so true! (And in fact last week I saw a database with tables with 1700bytes row size and 23 (!!!) indexes on them!) This also means that a too heavy denormalization is really not a good idea (we’re always talking about OLTP systems, keep it in mind), since the performance get worse with the increase of the row size. So, be careful out there, and keep in mind the “equilibrium” is the key world of a database professional: equilibrium between read and write performance, between normalization and denormalization, between to few and too may indexes. PS Tests are done on a VMWare Workstation 7 VM with 2 CPU and 4 GB of Memory. Host machine is a Dell Precsioni M6500 with i7 Extreme X920 Quad-Core HT 2.0Ghz and 16Gb of RAM. Database is stored on a SSD Intel X-25E Drive, Simple Recovery Model, running on SQL Server 2008 R2. If you also want to to tests on your own, you can download the test script here: Open TestIndexPerformance.sql

Read the article

Critical Threads Optimization

- by Rafael Vanoni

Background One of the more common issues we've been seeing in the field is the growing difficulty in optimizing performance of multi-threaded applications. A good portion of this difficulty is due to the increasing complexity of modern processors that present various degrees of sharing relationships between hardware components. Take any current CMT processor and you'll find any number of CPUs sharing execution pipelines, floating point units, caches, etc. Consequently, applying the traditional recipe of one software thread for each CPU will have varying degrees of success, according to the layout of the underlying hardware. On top of this increasing complexity we've also seen processors with features that aim at dynamically resourcing software threads according to their utilization. Intel's Turbo Boost allows processors to increase their operating frequency if there is enough thermal headroom available and the processor isn't fully utilized. More recently, the SPARC T4 processor introduced dynamic threading, allowing each core to dynamically allocate more resources to its active CPUs. Both cases are in essence recognizing that current processors will be running a wide mix of workloads, some will be designed for throughput, others for low latency. The hardware is providing mechanisms to dynamically resource threads according to their runtime behavior. We're very aware of these challenges in Solaris, and have been working to provide the best out of box performance while providing mechanisms to further optimize applications when necessary. The Critical Threads Optimzation was introduced in Solaris 10 8/11 and Solaris 11 as one such mechanism that allows customers to both address issues caused by contention over shared hardware resources and explicitly take advantage of features such as T4's dynamic threading. What it is The basic idea is to allow performance critical threads to execute with more exclusive access to hardware resources. For example, when deploying an application that implements a producer/consumer model, it'll likely be advantageous to give the producer more exclusive access to the hardware instead of having it competing for resources with all the consumers. In the case of a T4 based system, we may want to have a producer running by itself on a single core and create one consumer for each of the remaining CPUs. With the Critical Threads Optimization we're extending the semantics of scheduling priorities (which thread should run first) to include priority over shared resources (which thread should have more "space"). Now the scheduler will not only run higher priority threads first: it will also provide them with more exclusive access to hardware resources if they are available. How does it work ? Using the previous example in Solaris 11, all you'd have to do would be to place the producer in the Fixed Priority (FX) scheduling class at priority 60, or in the Real Time (RT) class at any priority and Solaris will try to give it more "hardware space". On both Solaris 10 8/11 and Solaris 11 this can be achieved through the existing priocntl(1,2) and priocntlset(2) interfaces. If your application already assigns these priorities to performance critical threads, there's no additional step you need to take. One important aspect of this optimization is that it requires some level of idleness in the system, either as a result of sizing the application before hand or through periods of transient idleness during runtime. If the system is fully committed, the scheduler will put all the available CPUs to work.Best practices If you're an application developer, we encourage you to look into assigning the right priorities for the different threads in your application. Solaris provides different scheduling classes (Time Share, Interactive, Fair Share, Fixed Priority and Real Time) that offer different policies and behaviors. It is not always simple to figure out which set of threads are critical to the performance of a workload, and it may not always be feasible to take advantage of this optimization, but we believe that this can be correctly (and safely) done during development. Overall, the out of box performance in Solaris should meet your workload's requirements. If you are looking into that extra bit of performance, then the Critical Threads Optimization may be what you're looking for.

Read the article

How do I use setFilmSize in panda3d to achieve the correct view?

- by lhk

I'm working with Panda3d and recently switched my game to isometric rendering. I moved the virtual camera accordingly and set an orthographic lens. Then I implemented the classes "Map" and "Canvas". A canvas is a dynamically generated mesh: a flat quad. I'm using it to render the ingame graphics. Since the game itself is still set in a 3d coordinate system I'm planning to rely on these canvases to draw sprites. I could have named this class "Tile" but as I'd like to use it for non-tile sketches (enemies, environment) as well I thought canvas would describe it's function better. Map does exactly what it's name suggests. Its constructor receives the number of rows and columns and then creates a standard isometric map. It uses the canvas class for tiles. I'm planning to write a map importer that reads a file to create maps on the fly. Here's the canvas implementation: class Canvas: def __init__(self, texture, vertical=False, width=1,height=1): # create the mesh format=GeomVertexFormat.getV3t2() format = GeomVertexFormat.registerFormat(format) vdata=GeomVertexData("node-vertices", format, Geom.UHStatic) vertex = GeomVertexWriter(vdata, 'vertex') texcoord = GeomVertexWriter(vdata, 'texcoord') # add the vertices for a flat quad vertex.addData3f(1, 0, 0) texcoord.addData2f(1, 0) vertex.addData3f(1, 1, 0) texcoord.addData2f(1, 1) vertex.addData3f(0, 1, 0) texcoord.addData2f(0, 1) vertex.addData3f(0, 0, 0) texcoord.addData2f(0, 0) prim = GeomTriangles(Geom.UHStatic) prim.addVertices(0, 1, 2) prim.addVertices(2, 3, 0) self.geom = Geom(vdata) self.geom.addPrimitive(prim) self.node = GeomNode('node') self.node.addGeom(self.geom) # this is the handle for the canvas self.nodePath=NodePath(self.node) self.nodePath.setSx(width) self.nodePath.setSy(height) if vertical: self.nodePath.setP(90) # the most important part: "Drawing" the image self.texture=loader.loadTexture(""+texture+".png") self.nodePath.setTexture(self.texture) Now the code for the Map class class Map: def __init__(self,rows,columns,size): self.grid=[] for i in range(rows): self.grid.append([]) for j in range(columns): # create a canvas for the tile. For testing the texture is preset tile=Canvas(texture="../assets/textures/flat_concrete",width=size,height=size) x=(i-1)*size y=(j-1)*size # set the tile up for rendering tile.nodePath.reparentTo(render) tile.nodePath.setX(x) tile.nodePath.setY(y) # and store it for later access self.grid[i].append(tile) And finally the usage def loadMap(self): self.map=Map(10, 10, 1) this function is called within the constructor of the World class. The instantiation of world is the entry point to the execution. The code is pretty straightforward and runs good. Sadly the output is not as expected: Please note: The problem is not the white rectangle, it's my player object. The problem is that although the map should have equal width and height it's stretched weirdly. With orthographic rendering I expected the map to be a perfect square. What did I do wrong ? UPDATE: I've changed the viewport. This is how I set up the orthographic camera: lens = OrthographicLens() lens.setFilmSize(40, 20) base.cam.node().setLens(lens) You can change the "aspect" by modifying the parameters of setFilmSize. I don't know exactly how they are related to window size and screen resolution but after testing a little the values above seem to work for me. Now everything is rendered correctly as long as I don't resize the window. Every change of the window's size as well as switching to fullscreen destroys the correct rendering. I know that implementing a listener for resize events is not in the scope of this question. However I wonder why I need to make the Film's height two times bigger than its width. My window is quadratic ! Can you tell me how to find out correct setting for the FilmSize ? UPDATE 2: I can imagine that it's hard to envision the behaviour of the game. At first glance the obvious solution is to pass the window's width and height in pixels to setFilmSize. There are two problems with that approach. The parameters for setFilmSize are ingame units. You'll get a way to big view if you pass the pixel size For some strange reason the image is distorted if you pass equal values for width and height. Here's the output for setFilmSize(800,800) You'll have to stress your eyes but you'll see what I mean

Read the article

Sprinkle Some Magik on that Java Virtual Machine

- by Jim Connors

GE Energy, through its Smallworld subsidiary, has been providing geospatial software solutions to the utility and telco markets for over 20 years. One of the fundamental building blocks of their technology is a dynamically-typed object oriented programming language called Magik. Like Java, Magik source code is compiled down to bytecodes that run on a virtual machine -- in this case the Magik Virtual Machine. Throughout the years, GE has invested considerable engineering talent in the support and maintenance of this virtual machine. At the same time vast energy and resources have been invested in the Java Virtual Machine. The question for GE has been whether to continue to make that investment on its own or to leverage massive effort provided by the Java community? Utilizing the Java Virtual Machine instead of maintaining its own virtual machine would give GE more opportunity to focus on application solutions. At last count, there are dozens, perhaps hundreds of examples of programming languages that have been hosted atop the Java Virtual Machine. Prior to the release of Java 7, that effort, although certainly possible, was generally less than optimal for languages like Magik because of its dynamic nature. Java, as a statically typed language had little use for this capability. In the quest to be a more universal virtual machine, Java 7, via JSR-292, introduced a new bytecode called invokedynamic. In short, invokedynamic affords a more flexible method call mechanism needed by dynamic languages like Magik. With this new capability GE Energy has succeeded in hosting their Magik environment on top of the Java Virtual Machine. So you may ask, why would GE wish to do such a thing? The benefits are many: Competitors to GE Energy claimed that the Magik environment was proprietary. By utilizing the Java Virtual Machine, that argument gets put to bed. JVM development is done in open source, where contributions are made world-wide by all types of organizations and individuals. The unprecedented wealth of class libraries and applications written for the Java platform are now opened up to Magik/JVM platform as first class citizens. In addition, the Magik/JVM solution vastly increases the developer pool to include the 9 million Java developers -- the largest developer community on the planet. Applications running on the JVM showed substantial performance gains, in some cases as much as a 5x speed up over the original Magik platform. Legacy Magik applications can still run on the original platform. They can be seamlessly migrated to run on the JVM by simply recompiling the source code. GE can now leverage the huge Java community. Undeniably the best virtual machine ever created, hundreds if not thousands of world class developers continually improve, poke, prod and scrutinize all aspects of the Java platform. As enhancements are made, GE automatically gains access to these. As Magik has little in the way of support for multi-threading, GE will benefit from current and future Java offerings (e.g. lambda expressions) that aim to further facilitate multi-core/multi-threaded application development. As the JVM is available for many more platforms, it broadens the reach of Magik, including the potential to run on a class devices never envisioned just a few short years ago. For example, Java SE compatible runtime environments are available for popular embedded ARM/Intel/PowerPC configurations that could theoretically host this software too. As compared to other JVM language projects, the Magik integration differs in that it represents a serious commercial entity betting a sizable part of its business on the success of this effort. Expect to see announcements not only from General Electric, but other organizations as they realize the benefits of utilizing the Java Virtual Machine.

Read the article

How do I get my character to move after adding to JFrame?

- by A.K.

So this is kind of a follow up on my other JPanel question that got resolved by playing around with the Layout... Now my MouseListener allows me to add a new Board(); object from its class, which is the actual game map and animator itself. But since my Board() takes Key Events from a Player Object inside the Board Class, I'm not sure if they are being started. Here's my Frame Class, where SideScroller S is the player object: package OurPackage; //Made By A.K. 5/24/12 //Contains Frame. import java.awt.BorderLayout; import java.awt.Button; import java.awt.CardLayout; import java.awt.Color; import java.awt.Container; import java.awt.Dimension; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.GridBagLayout; import java.awt.GridLayout; import java.awt.Image; import java.awt.Rectangle; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.event.KeyEvent; import java.awt.event.MouseAdapter; import java.awt.event.MouseEvent; import java.awt.event.MouseListener; import javax.swing.*; import javax.swing.plaf.basic.BasicOptionPaneUI.ButtonActionListener; public class Frame implements MouseListener { public static boolean StartGame = false; JFrame frm = new JFrame("Action-Packed Jack"); ImageIcon img = new ImageIcon(getClass().getResource("/Images/ActionJackTitle.png")); ImageIcon StartImg = new ImageIcon(getClass().getResource("/Images/JackStart.png")); public Image Title; JLabel TitleL = new JLabel(img); public JPanel TitlePane = new JPanel(); public JPanel BoardPane = new JPanel(); JPanel cards; JButton StartB = new JButton(StartImg); Board nBoard = new Board(); static Sound nSound; public Frame() { frm.setLayout(new GridBagLayout()); cards = new JPanel(new CardLayout()); nSound = new Sound("/Sounds/BunchaJazz.wav"); TitleL.setPreferredSize(new Dimension(970, 420)); frm.add(TitleL); frm.add(cards); cards.setSize(new Dimension(150, 45)); cards.setLayout(new GridBagLayout ()); cards.add(StartB); StartB.addMouseListener(this); StartB.setPreferredSize(new Dimension(150, 45)); frm.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frm.setSize(1200, 420); frm.setVisible(true); frm.setResizable(false); frm.setLocationRelativeTo(null); frm.pack(); } public static void main(String[] args) { SwingUtilities.invokeLater(new Runnable() { public void run() { new Frame(); } }); } public void mouseClicked(MouseEvent e) { nSound.play(); StartB.setContentAreaFilled(false); cards.remove(StartB); frm.remove(TitleL); frm.remove(cards); frm.setLayout(new GridLayout(1, 1)); frm.add(nBoard); //Add Game "Tiles" Or Content. x = 1200 nBoard.setPreferredSize(new Dimension(1200, 420)); cards.revalidate(); frm.validate(); } @Override public void mouseEntered(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mouseExited(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mousePressed(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mouseReleased(MouseEvent arg0) { // TODO Auto-generated method stub } }

Read the article

Very slow KVM in Ubuntu 12.04

- by Guy Fawkes

I use Ubuntu 12.04 64-bit and KVM, my CPU is Core i5 3.3 GHz and I have 8 GB of DDR3 RAM. I run Windows 7 in KVM and it's extremely slow. My co-worker use Debian on the same PC configuration and can run Windows 7 extremely fast! Where can be my problem? sudo cat /etc/libvirt/qemu/windows.xml  <domain type='kvm'> <name>windows</name> <uuid>5c685175-baea-0ca6-591f-8269d923ffb8</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/windows.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='network'> <mac address='52:54:00:94:63:91'/> <source network='default'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <sound model='ich6'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='vga' vram='262144' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain>

Read the article

Antenna Aligner Part 7: Connecting the dots

- by Chris George

The app is basically ready, so I eagerly started to sort out creating the application entry in iTunes Connect. It's mostly intuitive actually, although I did have to create yet another icon for iTunes sized 512x512 pixels, damn lucky I did the original graphics as vector! It took me longer to write the application description than anything else, I'm so not a tech author! I didn't like the way you have to 'make up' an SKU (Stock Keeping Unit) number. I have to do some googling to find out that it really doesn't matter what it is! It should be more obvious what to do from the actual website itself. That aside, the rest of it was actually fairly straightforward. As well as the details of the application, iPhone and iPad screenshots were also required. This posed somewhat of a problem. The iPhone ones were easy (as I have one!), but I do not (yet) own an iPad . So I thought I'd leave the iPad screenshots out for now. Once the application details were sorted, I moved onto the rights and pricing. At the start of the project I had made the decision that I wouldn't charge any more than the lowest amount £0.59. I believe there is a market for this, but as my first foray into app development I didn't want to take the mick. I did realise, however, that I had built my app with a developer certificate and provisioning profile. This was fairly quickly corrected, and again Nomad made this very easy to switch over to the distribution certificate and provisioning profile. With a sense of excitement I cracked open iTunes connect and clicked the upload button ... ...slight snag... . when the Nomad project was started, Apple allowed uploads of these binaries via iTunes Connect. But this is no longer possible, the only upload path is via the Application Loader available from the Apple Developer program. This itself has one limitation, it only runs on a mac! D'OH!!! Actually my language was somewhat more colourful when this fact came to light. After picking my laptop up off the floor and putting it back together... ok only joking, but I did nearly throw it out of frustration!... I started to consider the options; I briefly entertained the idea of buying a cheap mac from ebay... no, that defeats the whole object of what I'm doing, plus my wife wouldn't be impressed there are some guys out there in the interweb who will upload your app for a small fee...but I don't really like the idea of giving some faceless email address my apple developer login details, as well as my app binary! find some willing friend with a mac who would kindly let me use it... obviously this is the only sensible option. In the meantime, I informed the Nomad team about this slight 'issue' and they are currently investigating possible solutions...

Read the article

Tessellation Texture Coordinates

- by Stuart Martin

Firstly some info - I'm using DirectX 11 , C++ and I'm a fairly good programmer but new to tessellation and not a master graphics programmer. I'm currently implementing a tessellation system for a terrain model, but i have reached a snag. My current system produces a terrain model from a height map complete with multiple texture coordinates, normals, binormals and tangents for rendering. Now when i was using a simple vertex and pixel shader combination everything worked perfectly but since moving to include a hull and domain shader I'm slightly confused and getting strange results. My terrain is a high detail model but the textured results are very large patches of solid colour. My current setup passes the model data into the vertex shader then through the hull into the domain and then finally into the pixel shader for use in rendering. My only thought is that in my hull shader i pass the information into the domain shader per patch and this is producing the large areas of solid colour because each patch has identical information. Lighting and normal data are also slightly off but not as visibly as texturing. Below is a copy of my hull shader that does not work correctly because i think the way that i am passing the data through is incorrect. If anyone can help me out but suggesting an alternative way to get the required data into the pixel shader? or by showing me the correct way to handle the data in the hull shader id be very thankful! cbuffer TessellationBuffer { float tessellationAmount; float3 padding; }; struct HullInputType { float3 position : POSITION; float2 tex : TEXCOORD0; float3 normal : NORMAL; float3 tangent : TANGENT; float3 binormal : BINORMAL; float2 tex2 : TEXCOORD1; }; struct ConstantOutputType { float edges[3] : SV_TessFactor; float inside : SV_InsideTessFactor; }; struct HullOutputType { float3 position : POSITION; float2 tex : TEXCOORD0; float3 normal : NORMAL; float3 tangent : TANGENT; float3 binormal : BINORMAL; float2 tex2 : TEXCOORD1; float4 depthPosition : TEXCOORD2; }; ConstantOutputType ColorPatchConstantFunction(InputPatch<HullInputType, 3> inputPatch, uint patchId : SV_PrimitiveID) { ConstantOutputType output; output.edges[0] = tessellationAmount; output.edges[1] = tessellationAmount; output.edges[2] = tessellationAmount; output.inside = tessellationAmount; return output; } [domain("tri")] [partitioning("integer")] [outputtopology("triangle_cw")] [outputcontrolpoints(3)] [patchconstantfunc("ColorPatchConstantFunction")] HullOutputType ColorHullShader(InputPatch<HullInputType, 3> patch, uint pointId : SV_OutputControlPointID, uint patchId : SV_PrimitiveID) { HullOutputType output; output.position = patch[pointId].position; output.tex = patch[pointId].tex; output.tex2 = patch[pointId].tex2; output.normal = patch[pointId].normal; output.tangent = patch[pointId].tangent; output.binormal = patch[pointId].binormal; return output; } Edited to include the domain shader:- [domain("tri")] PixelInputType ColorDomainShader(ConstantOutputType input, float3 uvwCoord : SV_DomainLocation, const OutputPatch<HullOutputType, 3> patch) { float3 vertexPosition; PixelInputType output; // Determine the position of the new vertex. vertexPosition = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position; output.position = mul(float4(vertexPosition, 1.0f), worldMatrix); output.position = mul(output.position, viewMatrix); output.position = mul(output.position, projectionMatrix); output.depthPosition = output.position; output.tex = patch[0].tex; output.tex2 = patch[0].tex2; output.normal = patch[0].normal; output.tangent = patch[0].tangent; output.binormal = patch[0].binormal; return output; }

Read the article

Incomplete upgrade 12.04 to 12.10

- by David

Everything was running smoothly. Everything had been downloaded from Internet, packages had been installed and a prompt asked for some obsolete programs/files to be removed or kept. After that the computer crashed and and to manually force a shutdown. I turned it on again and surprise I was on 12.10! Still the upgrade was not finished! How can I properly finish that upgrade? Here's the output I got in the command line after following posted instructions: i astrill - Astrill VPN client software i dayjournal - Simple, minimal, digital journal. i gambas2-gb-form - A gambas native form component i gambas2-gb-gtk - The Gambas gtk component i gambas2-gb-gtk-ext - The Gambas extended gtk GUI component i gambas2-gb-gui - The graphical toolkit selector component i gambas2-gb-qt - The Gambas Qt GUI component i gambas2-gb-settings - Gambas utilities class i A gambas2-runtime - The Gambas runtime i google-chrome-stable - The web browser from Google i google-talkplugin - Google Talk Plugin i indicator-keylock - Indicator for Lock Keys i indicator-ubuntuone - Indicator for Ubuntu One synchronization s i A language-pack-kde-zh-hans - KDE translation updates for language Simpl i language-pack-kde-zh-hans-base - KDE translations for language Simplified C i libapt-inst1.4 - deb package format runtime library idA libattica0.3 - a Qt library that implements the Open Coll idA libbabl-0.0-0 - Dynamic, any to any, pixel format conversi idA libboost-filesystem1.46.1 - filesystem operations (portable paths, ite idA libboost-program-options1.46.1 - program options library for C++ idA libboost-python1.46.1 - Boost.Python Library idA libboost-regex1.46.1 - regular expression library for C++ i libboost-serialization1.46.1 - serialization library for C++ idA libboost-signals1.46.1 - managed signals and slots library for C++ idA libboost-system1.46.1 - Operating system (e.g. diagnostics support idA libboost-thread1.46.1 - portable C++ multi-threading i libcamel-1.2-29 - Evolution MIME message handling library i libcmis-0.2-0 - CMIS protocol client library i libcupsdriver1 - Common UNIX Printing System(tm) - Driver l i libdconf0 - simple configuration storage system - runt i libdvdcss2 - Simple foundation for reading DVDs - runti i libebackend-1.2-1 - Utility library for evolution data servers i libecal-1.2-10 - Client library for evolution calendars i libedata-cal-1.2-13 - Backend library for evolution calendars i libedataserver-1.2-15 - Utility library for evolution data servers i libexiv2-11 - EXIF/IPTC metadata manipulation library i libgdu-gtk0 - GTK+ standard dialog library for libgdu i libgdu0 - GObject based Disk Utility Library idA libgegl-0.0-0 - Generic Graphics Library idA libglew1.5 - The OpenGL Extension Wrangler - runtime en i libglew1.6 - OpenGL Extension Wrangler - runtime enviro i libglewmx1.6 - OpenGL Extension Wrangler - runtime enviro i libgnome-bluetooth8 - GNOME Bluetooth tools - support library i libgnomekbd7 - GNOME library to manage keyboard configura idA libgsoap1 - Runtime libraries for gSOAP i libgweather-3-0 - GWeather shared library i libimobiledevice2 - Library for communicating with the iPhone i libkdcraw20 - RAW picture decoding library i libkexiv2-10 - Qt like interface for the libexiv2 library i libkipi8 - library for apps that want to use kipi-plu i libkpathsea5 - TeX Live: path search library for TeX (run i libmagickcore4 - low-level image manipulation library i libmagickwand4 - image manipulation library i libmarblewidget13 - Marble globe widget library idA libmusicbrainz4-3 - Library to access the MusicBrainz.org data i libnepomukdatamanagement4 - Basic Nepomuk data manipulation interface i libnux-2.0-0 - Visual rendering toolkit for real-time app i libnux-2.0-common - Visual rendering toolkit for real-time app i libpoppler19 - PDF rendering library i libqt3-mt - Qt GUI Library (Threaded runtime version), i librhythmbox-core5 - support library for the rhythmbox music pl i libusbmuxd1 - USB multiplexor daemon for iPhone and iPod i libutouch-evemu1 - KernelInput Event Device Emulation Library i libutouch-frame1 - Touch Frame Library i libutouch-geis1 - Gesture engine interface support i libutouch-grail1 - Gesture Recognition And Instantiation Libr idA libx264-120 - x264 video coding library i libyajl1 - Yet Another JSON Library i linux-headers-3.2.0-29 - Header files related to Linux kernel versi i linux-headers-3.2.0-29-generic - Linux kernel headers for version 3.2.0 on i linux-image-3.2.0-29-generic - Linux kernel image for version 3.2.0 on 64 i mplayerthumbs - video thumbnail generator using mplayer i myunity - Unity configurator i A openoffice.org-calc - office productivity suite -- spreadsheet i A openoffice.org-writer - office productivity suite -- word processo i python-brlapi - Python bindings for BrlAPI i python-louis - Python bindings for liblouis i rts-bpp-dkms - rts-bpp driver in DKMS format. i system76-driver - Universal driver for System76 computers. i systemconfigurator - Unified Configuration API for Linux Instal i systemimager-client - Utilities for creating an image and upgrad i systemimager-common - Utilities and libraries common to both the i systemimager-initrd-template-am - SystemImager initrd template for amd64 cli i touchpad-indicator - An indicator for the touchpad i ubuntu-tweak - Ubuntu Tweak i A unity-lens-utilities - Unity Utilities lens i A unity-scope-calculator - Calculator engine i unity-scope-cities - Cities engine i unity-scope-rottentomatoes - Unity Scope Rottentomatoes

Search Results

Search found 8831 results on 354 pages for 'intel graphics'.

Page 319/354 | < Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326 | Next Page >

- by Francois Stark

- by Andy Tyurin

- by Bruno Tacca

- by user72681

- by Shaun

- by Tony Wolfram

- by Marc Alexander Reed

- by Radar4002

- by Lucas

- by Magnus Hoff

- by user17753

- by tonyrogerson

- by l0b0

- by Izzy

- by Sebastien

- by Another Anonymous User

- by Davide Mauri

- by Rafael Vanoni

- by lhk

- by Jim Connors

- by A.K.

- by Guy Fawkes

- by Chris George

- by Stuart Martin

- by David

< Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326 | Next Page >