Search Results

Search found 6397 results on 256 pages for 'ssh agent'.

Page 32/256 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• Enable re-attached mouse/keyboard via ssh?!

  - by aidan

  I had Ubuntu 9.10 x64 Desktop installed on a nettop I have (that I normally run headless), and yesterday I decided to take the plunge and update to 10.04. So, I plugged in a screen and usb mouse/keyboard, booted up and set to work. It was 1am, and it was telling me it had 3hrs left to install all the new packages, so I unplugged the screen and usb mouse/keyboard, left the box running, and went to bed. This evening, I plugged it all back in again to check progress. It's asking if I want to remove obsolete packages. I do, but neither the mouse nor keyboard work! I can access the box via SSH like I normally do; is there any way I can re-enable the keyboard from there? I'm reluctant to restart the box (via ssh) mid-way through such a complicated upgrade. Thanks for any help! lsusb (with wireless mouse/keyboard receiver unplugged): Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub lsusb (with wireless mouse/keyboard receiver attached): Bus 004 Device 005: ID 045e:005f Microsoft Corp. Wireless MultiMedia Keyboard Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• SSH through standard Belkin router to Asus Tomato router

  - by Luke

  I've set up SSH on the Tomato firmware on an Asus N10, via port 22 with key authentication. I've tested the keys by connecting with putty directly to the router when connected to its network. That works OK. But this router is behind a Belkin (F5D7632-4) router which also acts as modem and when I try to connect through with the (dynamic) public IP it times out. I'm guessing it's something to do with the NAT? My putty settings are taken from various online tutorials, but it's set up for port 22, with the correct key as mentioned. The Belkin router has port forwarding to the Asus (192.168.2.3) for port 22 TCP and UDP set up. It's now tough to see what to do in order to connect to the Asus router with an external IP - if it's even possible. Ideally I would have liked to have only needed to use the Asus router, but as it doesn't act as a modem, I need to connect it to the Belkin to use Tomato's features. Perhaps there's a solution here too? Network: Internet -> Belkin modem/router -> Asus router (Tomato SSH) -> Devices

  Read the article

• Howto disable SSH local port forwarding ?

  - by SCO

  I have a server running Ubuntu and the OpenSSH daemon. Let's call it S1. I use this server from client machines (let's call one of them C1) to do an SSH reverse tunnel by using remote port forwarding, eg : ssh -R 1234:localhost:23 login@S1 On S1, I use the default sshd_config file. From what I can see, anyone having the right credentials {login,pwd} on S1 can log into S1 and either do remote port forwarding and local port forwarding. Such credentials could be a certificate in the future, so in my understanding anyone grabbing the certificate can log into S1 from anywhere else (not necessarily C1) and hence create local port forwardings. To me, allowing local port forwarding is too dangerous, since it allows to create some kind of public proxy. I'm looking for a way tto disable only -L forwardings. I tried the following, but this disables both local and remote forwarding : AllowTcpForwarding No I also tried the following, this will only allow -L to SX:1. It's better than nothing, but still not what I need, which is a "none" option. PermitOpen SX:1 So I'm wondering if there is a way, so that I can forbid all local port forwards to write something like : PermitOpen none:none Is the following a nice idea ? PermitOpen localhost:1

  Read the article

• Applet User-agent

  - by Jonathan Barbero

  Hello! This is a simple question, but I didn´t found any documentation about this. When an applet makes a request, how is the user agent of the request. I want to know the applet user-agent expression to detect if a request comes from an applet. I make two test, with IE7 and Firefox 3.0.5 with JDK 1.6.0_03 and the user agent was "Mozilla/4.0 (Windows 2003 5.2) Java/1.6.0_03" in both, but I can´t generalize from two test. Thanks in advance, Jonathan.

  Read the article

• How to have a shell script available everywhere I SSH to

  - by aib

  I have a shell script which I simply cannot do without: bar from Theiling Online I use SSH a lot and on a variety of *nix servers. However, I am not a system administrator and usually don't have the time or privileges to install it on every server I connect to. It is apparently a very portable sh script and has command line options to export itself as a shell function, which got me thinking: Could I use one of OpenSSH's subjectively obscure features to export it everywhere I go? My first thought was to assign the source to an environment variable like BAR = "cat -v" and then execute it on the other side as `$BAR`, but 1) I can't even get the cat example to to work locally, 2) I don't know how to put the script's actual multiline source into an environment variable and 3) I have yet to see a machine with PermitUserEnvironment enabled. I guess I could even do with an ssh option to write a file called ~/bar at logon, but a more volatile solution would be better. Calling wget http://.../bar at logon would be unacceptable. Any ideas? P.S. Putty-specific solutions, though I doubt any would exist, are also fine.

  Read the article

• Using VMware Guest OS to enable Host OS to ssh to remote network

  - by Reuben L.

  Basically I have an issue because my host OS is 64-bit Linux Mint (Ubuntu derived) and it doesn't seem to be compatible with the Juniper Network Connect that is used by the network at my workplace. Thus, I am unable to ssh from terminal to the network. I can't make changes to the workplace network either so that leaves me with looking for solutions on my end. The main reason for me to access the network from home is to check on my running processes or to issue more commands to a few workstations. Putty is the desperate choice I usually make but it means I have to reboot to Windows and also have limited control. I've tried several other methods and they have all failed. Recently, I setup a VM with Windows 7 as the guest OS. Now half my problems are fixed as I don't have to physically reboot the system - I just have to engage Juniper Network Connect on the VM. However, I would still like to use my Linux terminal to ssh to the network. It sounds plausible that I could somehow manipulate ports to connect to the remote network from the host OS tunneled through the guest OS, but I really have no clue how to do so... Can anyone help?

  Read the article

• SSH to remote host (edgemarc 4200 or 4500 series routers) and pull arp data

  - by MaQleod

  I've been trying to think of a method to do this for days, but have not come up with anything yet. Ideally, this is what I'm looking to do: From a windows XP machine, I need to open an SSH connection to a remote host, send the arp command, and pull the text results of the command back for use on the client. I will need to parse this data and preferably produce a 2D array of IPs and MAC addresses. There will be no shared keys, this is all done with a username and password that will always be different, they will need to be fed into the command via variables that will be pulled from a database using an autoit script based on the WAN ip of the remote host. Now the actual parsing of the data and creation of the array will be easy if I can just get the text of the arp table. Is there any way to ssh to a remote host, run a command and return the data from that command to the client in a batch script or perl script (it is ok if it writes the text to a file, I can read it out of the file later, I just need it to get to the client)?

  Read the article

• Synchronize Dreamweaver over an SSH tunnel using an SFTP connection

  - by Aeo

  Maybe... Just maybe... I'm asking too much here. Maybe I'm even barking up the wrong tree. I'm looking to essentially have Dreamweaver establish an SSH tunnel to one machine, and then use that connection to synchronize a site that is on another machine entirely. Now for some details: We've got two connections here at work. We've got our office connection for day to day business, and then we've got some fancy connection hosting our web servers upstairs. For the most part they've been mutually exclusive until recently. We had been establishing an SFTP connection to synchronize our web sites by going out over the office connection to the web and coming back in over the fancy connection to our servers upstairs. Recently -ish, we established a LAN connection to one of our servers that makes a pleasant change in VNC connection quality. Thanks to Vinagre, this makes it really easy to connect to any of our servers over this LAN connection via SSH tunnel for VNC. However, in spite of that new addition of a LAN connection, we still synchronize over the 'net. Out the office connection and in on the fancy one upstairs. I'm looking to change this. I'd like to get Dreamweaver to first tunnel over our LAN connection to the servers, and then go from there to whatever connection it needs to. Am I asking too much? The current set up: Dreamweaver is installed on Windows XP which is running within VirtualBox on top of Ubuntu 10.10. The network connection for VirtualBox is currently made in NAT mode, but could easily be switched to a Bridged Connection should it need be. The LAN connection is to 1 of 5 servers running CentOS 5.

  Read the article

• How to connect via SSH to a linux mint system that is connected via OpenVPN

  - by Hilyin

  Is there a way to make SSH port not get sent through VPN so when my computer is connected to a VPN, it can still be remoted in via SSH from its non-VPN IP? I am using Mint Linux 13. Thank you for your help! This is the instructions I followed to setup the VPN: Open Terminal Type: sudo apt-get install network-manager-openvpn Press Y to continue. Type: sudo restart network-manager Download BTGuard certificate (CA) by typing: sudo wget -O /etc/openvpn/btguard.ca.crt http://btguard.com/btguard.ca.crt Click on the Network Manager icon, expand VPN Connections, and choose Configure VPN A Network Connections window will appear with the VPN tab open. Click Add. 8. A Choose A VPN Connection Type window will open. Select OpenVPN in the drop-down menu and click Create.. . In the Editing VPN connection window, enter the following: Connection name: BTGuard VPN Gateway: vpn.btguard.com Optional: Manually select your server location by using ca.vpn.btguard.com for Canada or eu.vpn.btguard.com for Germany. Type: select Password User name: username Password: password CA Certificate: browse and select this file: /etc/openvpn/btguard.ca.crt Click Advanced... near the bottom of the window. Under the General tab, check the box next to Use a TCP connection Click OK, then click Apply. Setup complete! How To Connect Click on the Network Manager icon in the panel bar. Click on VPN Connections Select BTGuard VPN The Network Manager icon will begin spinning. You may be prompted to enter a password. If so, this is your system account keychain password, NOT your BTGuard password. Once connected, the Network Manager icon will have a lock next to it indicating you are browsing securely with BTGuard.

  Read the article

• SSH Connection Error : No route to host

  - by dewbot

  There are three machines in this scenario: Desktop A : [email protected] Laptop A : [email protected] Machine B : [email protected] All the machines have Ubuntu 11.04 (Desktop A is a 64bit one) and have both openssh-server and openssh-client. Now when I try to connect Desktop A to Laptop A or vice-versa by ssh [email protected] I get an error as port 22: No route to host in both the cases. I own both the machines, now if I try same commands from my friend's machine, i.e. via Desktop B, I can access both my Laptop and Desktop. But if I try to access Desktop B from my Laptop or by Desktop I get port 22: Connection timed out I even tried changing ssh port no. in ssh_config file but no success. Note: that 'Laptop A' uses WiFi connection while 'Machine A' uses Ethernet Connection and 'Machine B' is on an entirely different network. Laptop A && Desktop A - Router/Nano_Rcvr provided to me by ISP. So to one Router two Machines are connected and can be accessed at the same time. here is my ifconfig output for both the machines :- Laptop wlan0 Link encap:Ethernet HWaddr X:X:X:X:00:bc inet addr:1.23.73.111 Bcast:1.23.95.255 Mask:255.255.224.0 inet6 addr: fe80::219:e3ff:fe04:bc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:108409 errors:0 dropped:0 overruns:0 frame:0 TX packets:82523 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:44974080 (44.9 MB) TX bytes:22973031 (22.9 MB) Desktop eth0 Link encap:Ethernet HWaddr X:X:X:X:c5:78 inet addr:1.23.68.209 Bcast:1.23.95.255 Mask:255.255.224.0 inet6 addr: fe80::227:eff:fe04:c578/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10380 errors:0 dropped:0 overruns:0 frame:0 TX packets:4509 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1790366 (1.7 MB) TX bytes:852877 (852.8 KB) Interrupt:43 Base address:0x2000

  Read the article

• Permission denied (publickey,gssapi-with-mic,password) ssh error

  - by zentenk

  Heads up I'm a noob with linux and networking. I set up a ubuntu server and I have a static ip for my network. When I try to connect to the server at home (external), it prompts me to log in. I supply the correct password (or incorrect pw), I get the error Permission denied, please try again. and after 3 times I get Permission denied (publickey,gssapi-with-mic,password) I am however able to connect with SSH from another computer in the same network with ssh < internal ip of server > I'm connecting with mac os x and my config file is vanilla. Note: During installation of ubuntu it says I don't have a default route or something while doing auto network configuration, but I ignored it and continued the installation, could this be the problem? EDIT: I have tried the below, I have nothing in hosts.allow and also iptables shows the ports that I have allowed, which is 22. I checked the auth.log, and there is nothing when I connect to it remotely (even when it says permission denied). I have tried connecting to it internally and the correct authentication logs show. Any idea whats wrong?

  Read the article

• Strange ssh login

  - by Hikaru

  I am running debian server and i have received a strange email warning about ssh login It says, that user mail logged in using ssh from remote address: Environment info: USER=mail SSH_CLIENT=92.46.127.173 40814 22 MAIL=/var/mail/mail HOME=/var/mail SSH_TTY=/dev/pts/7 LOGNAME=mail TERM=xterm PATH=/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games LANG=en_US.UTF-8 SHELL=/bin/sh KRB5CCNAME=FILE:/tmp/krb5cc_8 PWD=/var/mail SSH_CONNECTION=92.46.127.173 40814 my-ip-here 22 I looked in /etc/shadow and find out, that password for is not set mail:*:15316:0:99999:7::: I found this lines for login in auth.log n 3 02:57:09 gw sshd[2090]: pam_winbind(sshd:auth): getting password (0x00000388) Jun 3 02:57:09 gw sshd[2090]: pam_winbind(sshd:auth): pam_get_item returned a password Jun 3 02:57:09 gw sshd[2091]: pam_winbind(sshd:auth): user 'mail' granted access Jun 3 02:57:09 gw sshd[2091]: Accepted password for mail from 92.46.127.173 port 45194 ssh2 Jun 3 02:57:09 gw sshd[2091]: pam_unix(sshd:session): session opened for user mail by (uid=0) Jun 3 02:57:10 gw CRON[2051]: pam_unix(cron:session): session closed for user root and lots of auth failures for this user. There is no lines with COMMAND string for this user. Nothing was found with "rkhunter" and with "ps aux" process inspection, also there is no suspicious connections was found with "netstat" (as I can see) Can anyone tell me how it is possible and what else should be done? Thanks in advance.

  Read the article

• Redhat Linux password fail on ssh

  - by Stephopolis

  I am trying to ssh into my linux machine from my mac. If I am physically at the machine I can log in with my password just fine, but if I am sshing it refuses. I am getting: Permission denies (publickey,keyboard-interactive) I thought that it might be caused by some changes that I recently made to system-auth, but I restored everything to what I believe was the original format: #%PAM-1.0 # This file is auto-generated. # User changes will be destroyed the next time authconfig is run. auth required pam_env.so auth sufficient pam_fprintd.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth required pam_deny.so account required pam_unix.so account sufficient pam_localuser.so account sufficient pam_succeed_if.so uid < 500 quiet account required pam_permit.so password requisite pam_cracklib.so try_first_pass retry=3 password sufficient pam_unix.so md5 shadow nullok try_first_pass use_authtok password required pam_deny.so session optional pam_keyinit.so revoke session required pam_limits.so session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so But I still could not ssh in. I tried removing my password all together and that didn't seem to help either. It still asks and even entering an empty string (nothing) it still fails me out. Any advice?

  Read the article

• SSH connect error

  - by DMDGeeker

  I use a notebook with Ubuntu 12.10 and try to connect a server with Ubuntu 12.04. The server has already installed openssh-server. And allow publick key and password to login. But I connect the server sometime well but after minutes it will be error. First, it will show me these messages:    WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!    ......    Add correct host key in /home/myname/.ssh/known_hosts to get rid of this message. but I never reinstall system and the openssh-server. Both are never changed! The server nerver shutdown or reboot. Second, after I remove the relative key from my known_hosts and use ssh connect the server again, it will let me type my password. then my nightmare coming... Permission denied (publickey,password) But I typed the correct password! PS: I used password and public key both success. But the problem will appear again after i logout then login.

  Read the article

• SSH access to VM on windows 8 hyper-v

  - by samw

  I'm currently attending University and prefer a Linux environment to do much of my work, but all I have is a ThinkPad running Windows 8 Pro. Cygwin is nice, but it leaves me missing things like apt-get. My latest solution is to run an Ubuntu 12.04 VM with Windows 8's Client Hyper-V and use Cygwin for SSH access. I've looked everywhere online trying to set this up, but I haven't found much help. I've done this before using VirtualBox, so I figured this would be possible as well. Could anyone provide advice for setting up this environment? I'm completely uninitiated to Linux networking, virtual networking, and... pretty much all networking configuration, so this has been quite a challenge for me. What I've done so far: Created an external virtual switch to my wireless NIC. With this, I could successfully SSH to the VM with the leased IP address. But without a static IP, I would soon get disconnected. Created an internal virtual switch and attempt to "share" my main internet connection. (I was following the description on this page) Thank you all in advance!

  Read the article

• Why would an IE8 in a desktop has a 'Tablet PC 2.0' in its user-agent string?

  - by ultrajohn

  I am just curious, why would a windows 7 desktop, installed with ie8, have Tablet PC 2.0 in its user agent string. Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; Tablet PC 2.0) Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; Tablet PC 2.0) Is this a feature in Windows 7, how can I turn this off in IE8? Other browsers on the same computer don't have such string in the user-agent string they send. As a result, one of our web application confuses this particular desktop client as a mobile (because of the tablet), hence returns the mobile version of our website to it. Thank you!

  Read the article

• Git with SSH on Windows

  - by pankar

  Hello all, I've went through the excellent guide provided by Tim Davis (http://www.timdavis.com.au/git/setting-up-a-msysgit-server-with-copssh-on-windows/) which is about configuring Git to work with SSH under Windows in order to produce a Git Server in order to have a main place for my DVCS. I am in the process of creating a clone for my project. I’ve went through all the steps till this point, but I keep getting this from TortoiseGit: git.exe clone -v “ssh://[email protected]:22/SSH/Home/administrator/myapp.git” “E:\GitTest\myapp” bash: [email protected]: command not found Initialized empty Git repository in E:/GitTest/myapp/.git/ fatal: The remote end hung up unexpectedly Success and nothing gets cloned. BTW: The TortoisePLink comes up just before this message appears and asks me: “login as:” ( I thought that this info is given in the command, i.e: Administrator@blahblah. My home variable is set to the correct place: From a Git Bash shell: echo $HOME /c/SSH/home/Administrator I’ve also tried using Putty’s plink instead of TortoisePLink (in both Git’s and TortoiseGit’s installation). This time the error was narrowed down to: git.exe clone -v “ssh://[email protected]:22/c:/SSH/Home/administrator/myapp.git” “E:\GitTest\myapp” Initialized empty Git repository in E:/GitTest/myapp/.git/ fatal: The remote end hung up unexpectedly Any help is more than welcome! Thanks Panagiotis

  Read the article

• Execute SSH commands on Cisco router. Codeigniter SSH library

  - by jomajo

  I have a little problem. I'm using Codeigniter with SSH library written by Shuky (https://bitbucket.org/quicktips/codeigniter-ssh2-library/src/a444968345ba/SSH.php -- You can see the code by following this link). Everything related with SSH works fine with other devices, but when I try to use this library and execute commands on Cisco devices, nothing happens (commands are not executed). I know that the connection is successful, but I can't execute any commands. When I try to run and execute comands through SSH on Cisco devices I get this error: A PHP Error was encountered Severity: Warning Message: stream_set_blocking() expects parameter 1 to be resource, boolean given Filename: libraries/SSH.php Line Number: 128 A PHP Error was encountered Severity: Warning Message: fread() expects parameter 1 to be resource, boolean given Filename: libraries/SSH.php Line Number: 129 In the library these lines look like this: /** * Get stream data * * @access privte * @return bool */ function _get_stream_data($stream) { stream_set_blocking( $stream, true ); while( $buf = fread($stream,4096) ) { $this->data .= $buf.'~'; } return TRUE; } line 128 - stream_set_blocking( $stream, true ); line 129 - while( $buf = fread($stream,4096) ) { Maybe you guys know where the problem is? Thank you for your time and your answers!

  Read the article

• What exactly does ssh send when performing key negotiation?

  - by Checkers

  When explicitly specifying identity file to ssh: ssh -i ./id_rsa ... I have these lines in ssh debug trace: debug1: Offering public key: ./id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply Does it mean ssh-generated id_rsa contains public RSA exponent as well, or ssh is sending out my private key? (which, of course, does not make sense). id_rsa format seems to be rather explicit that it contains private key with its "BEGIN PRIVATE KEY" block.

  Read the article

• SQL Server Replication Agent priority

  - by Wikser

  Every hour a server replicates SQL server data with some external web server. During this time, which takes about 2-5minutes, the database seriously slows down. Colleagues, which work with the front end applications of that on another terminal server, even regularly start complaining. The databases are also synchroniously mirrored (via SQLServer mirroring, no replication) to a third server. Note that 99% of the data is replicated outgoing, so the server should rarely need to update its data. As the (merge and transactional) replication tasks are not time-critical, I would like to reduce their priority or somehow slow them down, so they don't affect the database performance that much. How would you implement that?

  Read the article

• How do I make Home and End work in PuTTY SSH with fish shell?

  - by endolith

  Years ago, an Ubuntu update broke this and I've never found a solution. I have fish as my default shell. Ubuntu 12.10 Locally (Gnome Terminal), Home and End keys work fine in both fish and bash. When I log in by SSH using PuTTY, then run bash, Home and End work fine inside of bash. However, when I log in by SSH using PuTTY, in the default fish shell, pressing Home key produces [1~ (sometimes erasing the line, sometimes not). When I press End, it produces [4~. How do I get Home and End to work correctly?

  Read the article

• Is it possible to remove a particular host key from SSH's known_hosts file?

  - by Kaustubh P

  I usually end up deleting the entire known_hosts file, which I have no problems for. But just out of curiosity, Is it possible to remove just a single entry? I opened the known_hosts file, and other han understanding that the file contains fingerprints for a given machine, I dont understand anything. Below is the message I faced, which led me to ask this question. Add correct host key in /home/wissen16/.ssh/known_hosts to get rid of this message. Offending key in /home/wissen16/.ssh/known_hosts:1 RSA host key for foo.com has changed and you have requested strict checking. Host key verification failed. Thanks.

  Read the article

• SSH login with expect(1). How to exit expect and remain in SSH?

  - by Koroviev

  So I wanted to automate my SSH logins. The host I'm with doesn't allow key authentication on this server, so I had to be more inventive. I don't know much about shell scripting, but some research showed me the command 'expect' and some scripts using it for exactly this purpose. I set up a script and ran it, it worked perfectly to login. #!/usr/bin/env expect -f set password "my_password" match_max 1000 spawn ssh -p 2222 "my_username"@11.22.11.22 expect "*?assword:*" send -- "$password\r" send -- "\r" expect eof Initially, it runs as it should. Last login: Wed May 12 21:07:52 on ttys002 esther:~ user$ expect expect-test.exp spawn ssh -p 2222 [email protected] [email protected]'s password: Last login: Wed May 12 15:44:43 2010 from 20.10.20.10 -jailshell-3.2$ But that's where the success ends. Commands do not work, but hitting enter just makes a new line. Arrow keys and other non-alphanumeric keys produce symbols like '^[[C', '^[[A', '^[OQ' etc.[1] No other prompt appears except the two initially created by the expect script. Any ignored commands will be executed by my local shell once expect times out. An example: -jailshell-3.2$ whoami ls pwd hostname (...time passes, expect times out...) esther:~ user$ whoami user esther:~ ciaran$ ls Books Documents Movies Public Code Downloads Music Sites Desktop Library Pictures expect-test.exp esther:~ ciaran$ pwd /Users/ciaran esther:~ ciaran$ hostname esther.local As I said, I have no shell scripting experience, but I think it's being caused because I'm still "inside of" expect, but not "inside of" SSH. Is there any way to terminate expect once I've logged in, and have it hand over the SSH session to me? I've tried commands like 'close' and 'exit', after " send -- "\r" ". Yeah, they do what I want and expect dies, but it vindictively takes the SSH session down with it, leaving me back where I started. What I really need is for expect to do its job and terminate, leaving the SSH session back in my hands as if I did it manually. All help is appreciated, thanks. [1] I know there's a name for this, but I don't know what it is. And this is one of those frightening things which can't be googled, because the punctuation characters are ignored. As a side question, what's the story here?

  Read the article

• ssh xauth error Mac OS 10.6.3

  - by SteveJ

  Whenever I ssh with X11 forwarding to a remote box from my macbook I get the following error after a few seconds pause: Warning: untrusted X11 forwarding setup failed: xauth key data not generated Warning: No xauth data; using fake authentication data for X11 forwarding. Any ideas on how to fix this?

  Read the article

• GIT: clone works, remote push doesn't. Remote repository over copssh.

  - by Rui

  Hi all, I've "setup-a-msysgit-server-with-copssh-on-windows", following Tim Davis' guide and I was now learning how to use the git commands, following Jason Meridth's guide, and I have managed to get everything working fine, but now I can't pass the push command. I have set the server and the client on the same machine (for now), win7-x64. Here is some info of how things are set up: CopSSH Folder : C:/SSH/ Local Home Folder : C:/Users/rvc/ Remote Home Folder: C:/SSH/home/rvc/ # aka /cygdrive/c/SSH/home/rvc/ git remote rep : C:/SSH/home/rvc/myapp.git # empty rep At '/SSH/home/rvc/.bashrc' and 'Users/rvc/.bashrc': export HOME=/cygdrive/c/SSH/home/rvc gitpath='/cygdrive/c/Program Files (x86)/Git/bin' gitcorepath='/cygdrive/c/Program Files (x86)/Git/libexec/git-core' PATH=${gitpath}:${gitcorepath}:${PATH} So, cloning works (everything bellow is done via "Git Bash here" :P): rvc@RVC-DESKTOP /c/code $ git clone ssh://[email protected]:5858/SSH/home/rvc/myapp.git Initialized empty Git repository in C:/code/myapp/.git/ warning: You appear to have cloned an empty repository. rvc@RVC-DESKTOP /c/code $ cd myapp rvc@RVC-DESKTOP /c/code/myapp (master) $ git remote -v origin ssh://[email protected]:5858/SSH/home/rvc/myapp.git (fetch) origin ssh://[email protected]:5858/SSH/home/rvc/myapp.git (push) Then I create a file: rvc@RVC-DESKTOP /c/code/myapp (master) $ touch test.file rvc@RVC-DESKTOP /c/code/myapp (master) $ ls test.file Try to push it and get this error: rvc@RVC-DESKTOP /c/code/myapp (master) $ git add test.file rvc@RVC-DESKTOP /c/code/myapp (master) $ GIT_TRACE=1 git push origin master trace: built-in: git 'push' 'origin' 'master' trace: run_command: 'C:\Users\rvc\bin\plink.exe' '-batch' '-P' '5858' '[email protected] 68.1.65' 'git-receive-pack '\''/SSH/home/rvc/myapp.git'\''' git: '/SSH/home/rvc/myapp.git' is not a git command. See 'git --help'. fatal: The remote end hung up unexpectedly "git: '/SSH/home/rvc/myapp.git' is not a git command. See 'git --help'." .. what?! So, can anybody help? If you need any aditional information that I've missed, just ask. Thanks in advanced. EDIT: RAAAGE!! I'm having the same problem again, but now with ssh: rvc@RVC-DESKTOP /c/code/myapp (master) $ GIT_TRACE=1 git push trace: built-in: git 'push' trace: run_command: 'ssh' '-p' '5885' '[email protected]' 'git-receive-pack '\''/ SSH/home/rvc/myapp.git'\''' git: '/SSH/home/rvc/myapp.git' is not a git command. See 'git --help'. fatal: The remote end hung up unexpectedly I've tried GUI push, and shows the same message. git: '/SSH/home/rvc/myapp.git' is not a git command. See 'git --help'. Pushing to ssh://[email protected]:5885/SSH/home/rvc/myapp.git fatal: The remote end hung up unexpectedly Here's the currents .bashrc: C:\Users\rvc.bashrc (I think this is used only by cygwin/git bash): export HOME=/c/SSH/home/rvc gitpath='/c/Program Files (x86)/Git/bin' gitcorepath='/c/Program Files (x86)/Git/libexec/git-core' export GIT_EXEC_PATH=${gitcorepath} PATH=${gitpath}:${gitcorepath}:${PATH} C:\SSH\home\rvc.bashrc (.. and this is used when git connects via ssh to the "remote" server): export HOME=/c/SSH/home/rvc gitpath='/cygdrive/c/Program Files (x86)/Git/bin' gitcorepath='/cygdrive/c/Program Files (x86)/Git/libexec/git-core' export GIT_EXEC_PATH=${gitcorepath} PATH=${gitpath}:${gitcorepath}:${PATH}

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >