Search Results

Search found 8577 results on 344 pages for 'latest'.

Page 325/344 | < Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >

  • Encode audio to aac with libavcodec

    - by ryan
    I'm using libavcodec (latest git as of 3/3/10) to encode raw pcm to aac (libfaac support enabled). I do this by calling avcodec_encode_audio repeatedly with codec_context-frame_size samples each time. The first four calls return successfully, but the fifth call never returns. When I use gdb to break, the stack is corrupt. If I use audacity to export the pcm data to a .wav file, then I can use command-line ffmpeg to convert to aac without any issues, so I'm sure it's something I'm doing wrong. I've written a small test program that duplicates my problem. It reads the test data from a file, which is available here: http://birdie.protoven.com/audio.pcm (~2 seconds of signed 16 bit LE pcm) I can make it all work if I use FAAC directly, but the code would be a little cleaner if I could just use libavcodec, as I'm also encoding video, and writing both to an mp4. ffmpeg version info: FFmpeg version git-c280040, Copyright (c) 2000-2010 the FFmpeg developers built on Mar 3 2010 15:40:46 with gcc 4.4.1 configuration: --enable-libfaac --enable-gpl --enable-nonfree --enable-version3 --enable-postproc --enable-pthreads --enable-debug=3 --enable-shared libavutil 50.10. 0 / 50.10. 0 libavcodec 52.55. 0 / 52.55. 0 libavformat 52.54. 0 / 52.54. 0 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0.10. 0 / 0.10. 0 libpostproc 51. 2. 0 / 51. 2. 0 Is there something I'm not setting, or setting incorrectly in my codec context, maybe? Any help is greatly appreciated! Here is my test code: #include <stdio.h> #include <libavcodec/avcodec.h> void EncodeTest(int sampleRate, int channels, int audioBitrate, uint8_t *audioData, size_t audioSize) { AVCodecContext *audioCodec; AVCodec *codec; uint8_t *buf; int bufSize, frameBytes; avcodec_register_all(); //Set up audio encoder codec = avcodec_find_encoder(CODEC_ID_AAC); if (codec == NULL) return; audioCodec = avcodec_alloc_context(); audioCodec->bit_rate = audioBitrate; audioCodec->sample_fmt = SAMPLE_FMT_S16; audioCodec->sample_rate = sampleRate; audioCodec->channels = channels; audioCodec->profile = FF_PROFILE_AAC_MAIN; audioCodec->time_base = (AVRational){1, sampleRate}; audioCodec->codec_type = CODEC_TYPE_AUDIO; if (avcodec_open(audioCodec, codec) < 0) return; bufSize = FF_MIN_BUFFER_SIZE * 10; buf = (uint8_t *)malloc(bufSize); if (buf == NULL) return; frameBytes = audioCodec->frame_size * audioCodec->channels * 2; while (audioSize >= frameBytes) { int packetSize; packetSize = avcodec_encode_audio(audioCodec, buf, bufSize, (short *)audioData); printf("encoder returned %d bytes of data\n", packetSize); audioData += frameBytes; audioSize -= frameBytes; } } int main() { FILE *stream = fopen("audio.pcm", "rb"); size_t size; uint8_t *buf; if (stream == NULL) { printf("Unable to open file\n"); return 1; } fseek(stream, 0, SEEK_END); size = ftell(stream); fseek(stream, 0, SEEK_SET); buf = (uint8_t *)malloc(size); fread(buf, sizeof(uint8_t), size, stream); fclose(stream); EncodeTest(32000, 2, 448000, buf, size); }

    Read the article

  • MySQL "ERROR 1005 (HY000): Can't create table 'foo.#sql-12c_4' (errno: 150)"

    - by Ankur Banerjee
    Hi, I was working on creating some tables in database foo, but every time I end up with errno 150 regarding the foreign key. Firstly, here's my code for creating tables: CREATE TABLE Clients ( client_id CHAR(10) NOT NULL , client_name CHAR(50) NOT NULL , provisional_license_num CHAR(50) NOT NULL , client_address CHAR(50) NULL , client_city CHAR(50) NULL , client_county CHAR(50) NULL , client_zip CHAR(10) NULL , client_phone INT NULL , client_email CHAR(255) NULL , client_dob DATETIME NULL , test_attempts INT NULL ); CREATE TABLE Applications ( application_id CHAR(10) NOT NULL , office_id INT NOT NULL , client_id CHAR(10) NOT NULL , instructor_id CHAR(10) NOT NULL , car_id CHAR(10) NOT NULL , application_date DATETIME NULL ); CREATE TABLE Instructors ( instructor_id CHAR(10) NOT NULL , office_id INT NOT NULL , instructor_name CHAR(50) NOT NULL , instructor_address CHAR(50) NULL , instructor_city CHAR(50) NULL , instructor_county CHAR(50) NULL , instructor_zip CHAR(10) NULL , instructor_phone INT NULL , instructor_email CHAR(255) NULL , instructor_dob DATETIME NULL , lessons_given INT NULL ); CREATE TABLE Cars ( car_id CHAR(10) NOT NULL , office_id INT NOT NULL , engine_serial_num CHAR(10) NULL , registration_num CHAR(10) NULL , car_make CHAR(50) NULL , car_model CHAR(50) NULL ); CREATE TABLE Offices ( office_id INT NOT NULL , office_address CHAR(50) NULL , office_city CHAR(50) NULL , office_County CHAR(50) NULL , office_zip CHAR(10) NULL , office_phone INT NULL , office_email CHAR(255) NULL ); CREATE TABLE Lessons ( lesson_num INT NOT NULL , client_id CHAR(10) NOT NULL , date DATETIME NOT NULL , time DATETIME NOT NULL , milegage_used DECIMAL(5, 2) NULL , progress CHAR(50) NULL ); CREATE TABLE DrivingTests ( test_num INT NOT NULL , client_id CHAR(10) NOT NULL , test_date DATETIME NOT NULL , seat_num INT NOT NULL , score INT NULL , test_notes CHAR(255) NULL ); ALTER TABLE Clients ADD PRIMARY KEY (client_id); ALTER TABLE Applications ADD PRIMARY KEY (application_id); ALTER TABLE Instructors ADD PRIMARY KEY (instructor_id); ALTER TABLE Offices ADD PRIMARY KEY (office_id); ALTER TABLE Lessons ADD PRIMARY KEY (lesson_num); ALTER TABLE DrivingTests ADD PRIMARY KEY (test_num); ALTER TABLE Applications ADD CONSTRAINT FK_Applications_Offices FOREIGN KEY (office_id) REFERENCES Offices (office_id); ALTER TABLE Applications ADD CONSTRAINT FK_Applications_Clients FOREIGN KEY (client_id) REFERENCES Clients (client_id); ALTER TABLE Applications ADD CONSTRAINT FK_Applications_Instructors FOREIGN KEY (instructor_id) REFERENCES Instructors (instructor_id); ALTER TABLE Applications ADD CONSTRAINT FK_Applications_Cars FOREIGN KEY (car_id) REFERENCES Cars (car_id); ALTER TABLE Lessons ADD CONSTRAINT FK_Lessons_Clients FOREIGN KEY (client_id) REFERENCES Clients (client_id); ALTER TABLE Cars ADD CONSTRAINT FK_Cars_Offices FOREIGN KEY (office_id) REFERENCES Offices (office_id); ALTER TABLE Clients ADD CONSTRAINT FK_DrivingTests_Clients FOREIGN KEY (client_id) REFERENCES Clients (client_id); These are the errors that I get: mysql> ALTER TABLE Applications ADD CONSTRAINT FK_Applications_Cars FOREIGN KEY (car_id) REFERENCES Cars (car_id); ERROR 1005 (HY000): Can't create table 'foo.#sql-12c_4' (errno: 150) I ran SHOW ENGINE INNODB STATUS which gives a more detailed error description: ------------------------ LATEST FOREIGN KEY ERROR ------------------------ 100509 20:59:49 Error in foreign key constraint of table practice9/#sql-12c_4: FOREIGN KEY (car_id) REFERENCES Cars (car_id): Cannot find an index in the referenced table where the referenced columns appear as the first columns, or column types in the table and the referenced table do not match for constraint. Note that the internal storage type of ENUM and SET changed in tables created with >= InnoDB-4.1.12, and such columns in old tables cannot be referenced by such columns in new tables. See http://dev.mysql.com/doc/refman/5.1/en/innodb-foreign-key-constraints.html for correct foreign key definition. ------------ I searched around on StackOverflow and elsewhere online - came across a helpful blog post here with pointers on how to resolve this error - but I can't figure out what's going wrong. Any help would be appreciated!

    Read the article

  • Clipplanes, vertex shaders and hardware vertex processing in Direct3D 9

    - by Igor
    Hi, I have an issue with clipplanes in my application that I can reproduce in a sample from DirectX SDK (February 2010). I added a clipplane to the HLSLwithoutEffects sample: ... D3DXPLANE g_Plane( 0.0f, 1.0f, 0.0f, 0.0f ); ... void SetupClipPlane(const D3DXMATRIXA16 & view, const D3DXMATRIXA16 & proj) { D3DXMATRIXA16 m = view * proj; D3DXMatrixInverse( &m, NULL, &m ); D3DXMatrixTranspose( &m, &m ); D3DXPLANE plane; D3DXPlaneNormalize( &plane, &g_Plane ); D3DXPLANE clipSpacePlane; D3DXPlaneTransform( &clipSpacePlane, &plane, &m ); DXUTGetD3D9Device()->SetClipPlane( 0, clipSpacePlane ); } void CALLBACK OnFrameMove( double fTime, float fElapsedTime, void* pUserContext ) { // Update the camera's position based on user input g_Camera.FrameMove( fElapsedTime ); // Set up the vertex shader constants D3DXMATRIXA16 mWorldViewProj; D3DXMATRIXA16 mWorld; D3DXMATRIXA16 mView; D3DXMATRIXA16 mProj; mWorld = *g_Camera.GetWorldMatrix(); mView = *g_Camera.GetViewMatrix(); mProj = *g_Camera.GetProjMatrix(); mWorldViewProj = mWorld * mView * mProj; g_pConstantTable->SetMatrix( DXUTGetD3D9Device(), "mWorldViewProj", &mWorldViewProj ); g_pConstantTable->SetFloat( DXUTGetD3D9Device(), "fTime", ( float )fTime ); SetupClipPlane( mView, mProj ); } void CALLBACK OnFrameRender( IDirect3DDevice9* pd3dDevice, double fTime, float fElapsedTime, void* pUserContext ) { // If the settings dialog is being shown, then // render it instead of rendering the app's scene if( g_SettingsDlg.IsActive() ) { g_SettingsDlg.OnRender( fElapsedTime ); return; } HRESULT hr; // Clear the render target and the zbuffer V( pd3dDevice->Clear( 0, NULL, D3DCLEAR_TARGET | D3DCLEAR_ZBUFFER, D3DCOLOR_ARGB( 0, 45, 50, 170 ), 1.0f, 0 ) ); // Render the scene if( SUCCEEDED( pd3dDevice->BeginScene() ) ) { pd3dDevice->SetVertexDeclaration( g_pVertexDeclaration ); pd3dDevice->SetVertexShader( g_pVertexShader ); pd3dDevice->SetStreamSource( 0, g_pVB, 0, sizeof( D3DXVECTOR2 ) ); pd3dDevice->SetIndices( g_pIB ); pd3dDevice->SetRenderState( D3DRS_CLIPPLANEENABLE, D3DCLIPPLANE0 ); V( pd3dDevice->DrawIndexedPrimitive( D3DPT_TRIANGLELIST, 0, 0, g_dwNumVertices, 0, g_dwNumIndices / 3 ) ); pd3dDevice->SetRenderState( D3DRS_CLIPPLANEENABLE, 0 ); RenderText(); V( g_HUD.OnRender( fElapsedTime ) ); V( pd3dDevice->EndScene() ); } } When I rotate the camera I have different visual results when using hardware and software vertex processing. In software vertex processing mode or when using the reference device the clipping plane works fine as expected. In hardware mode it seems to rotate with the camera. If I remove the call to RenderText(); from OnFrameRender then hardware rendering also works fine. Further debugging reveals that the problem is in ID3DXFont::DrawText. I have this issue in Windows Vista and Windows 7 but not in Windows XP. I tested the code with the latest NVidia and ATI drivers in all three OSes on different PCs. Is it a DirectX issue? Or incorrect usage of clipplanes? Thanks Igor

    Read the article

  • How do I evaluate my skillset against the current market to see what needs improvement and where my

    - by baijajusav
    First of all, this question may be out of bounds for this site. If so, remove it. I say this because this site seems to be a place for more concrete questions that are not so relative in nature. And before I begin, for those of you whom just prefer a question and not this sort of dialog, here is my question: How can I assess my current skills as a programmer and decide where and what areas to improve upon? That said, here's what I'm asking/talking about, in essence. The market is always in constant flux. As programmers we're always having to learn new things, update our skills, push ourselves into that next project. There's not a very good litmus test that I know of for us to get an idea of where we stand as programmers. I came across this blog post by Jeff Atwood talking about why can't programmers code. Instinctively (and as the post goes on to state) I rushed through the program in about 4 minutes (most of that time was b/c I was hand writing it out. Still, this doesn't really answer the question of where do my skills need to be to succeed in today's world. I real blogs, listen to podcasts, try to keep up on the latest things coming out. It has only been in the past couple of months that I made a decision to pick a focus area for my learning as I can't learn everything and trying to do so is to spread myself too thin. I chose ASP.NET MVC & C#. I plan to stick with Microsoft technologies, not out of some sense of loyalty or stubbornness, but rather because they seem to stream together and have a unifying connection between them. With Windows Phone 7 coming out, it seems that now is the obvious time to pick up WPF and Silverlight as well. Still, if you asked me to code something apart from intellisense and the internet, I probably couldn't get the syntax right. I don't have libraries memorized or know precisely where the classes I use exist within the .Net framework, namely because I haven't had to pull that knowledge out of the air. In a way, I suppose Visual Studio has insulated me, which isn't a good thing, but, at the same time, I've still been able to be productive. I'm working on my own side project to try and help my learning. In doing so, I'm trying to make use of best practices and 3rd party frameworks where I can. I'm using automapper and EF 1.0. I know everyone in the .net community seems to cry foul at the sound of EF 1.0, but I can't say why because I've never used it. There's no lazy loading and that has proven rather annoying; however, aside from that, I haven't had that much of an issue. Granted this is probably because I'm not writing tests as I go (which I'm not doing because I don't know how to test EF in tests and don't really have a clue how to write tests for ASP.NET MVC 1.0). I'm also using a custom membership provider; granted, it's a barebone implementation, but I'm using it still. My thinking in all of this is, while I am neglecting a great many important technologies that are in the mainstream, I'll have a working project in the end. I can come back and add those things after I finish. Doing it all now and at once seems like too much. I know how I work and I don't think I'd ever get it done that way. I've elected to make this a community wiki as I think this question might fight better there. If a moderator disagrees with that choice or the decision to post this here, the just delete the question. I'm not trying to make undue work for anyone. I'm just a programmer trying to assess my where his skills are now and where I should be improving.

    Read the article

  • validate() > show field after radiobutton selection

    - by RihanU
    hi im saw this jquery script: http://jquery.bassistance.de/validate/demo/ and i want also the posibility to show a field when a button is checked but not with a checkbox. but with two radiobuttons. if radiobutton1 is checked, display field1 and if radiobutton2 is checked display field 2 what do i have to change..? <script type="text/javascript"> $().ready(function() { //code to hide topic selection, disable for demo var foo = $("#foo"); // foo topics are optional, hide first var inital = foo.is(":checked"); var topics = $("#blaat")[inital ? "removeClass" : "addClass"]("gray"); var topicInputs = topics.find("input").attr("disabled", !inital); // show when foo is checked foo.click(function() { topics[this.checked ? "removeClass" : "addClass"]("gray"); topicInputs.attr("disabled", !this.checked); }); }); </script> <form class="cmxform" id="signupForm" method="get" action=""> <fieldset> <p> <label for="foo">De checkbox dus veranderen naar 2 radio buttons</label> <input type="checkbox" class="checkbox" id="foo" name="foo" /> <!-- <input type="radio" value="ding" class="checkbox" id="foo" name="foo" /> <input type="radio" value="dong" class="checkbox" id="foo" name="foo" /> --> </p> <!-- Fieldset 1 --> <fieldset id="blaat"> <label for="topic_marketflash"> <input type="checkbox" id="topic_marketflash" value="marketflash" name="topic" /> Marketflash </label> <label for="topic_fuzz"> <input type="checkbox" id="topic_fuzz" value="fuzz" name="topic" /> Latest fuzz </label> <label for="topic_digester"> <input type="checkbox" id="topic_digester" value="digester" name="topic" /> Mailing list digester </label> </fieldset> <!-- --> <!-- Fieldset 2 --> <fieldset id="andere"> <label for="topic_marketflash"> <input type="checkbox" id="topic_marketflash" value="marketflash" name="topic" /> Voor </label> <label for="topic_fuzz"> <input type="checkbox" id="topic_fuzz" value="fuzz" name="topic" /> Beelden </label> </fieldset> <!-- --> </fieldset> </form>

    Read the article

  • GLSL Error: failed to preprocess the source. How can I troubleshoot this?

    - by Brent Parker
    I'm trying to learn to play with OpenGL GLSL shaders. I've written a very simple program to simply create a shader and compile it. However, whenever I get to the compile step, I get the error: Error: Preprocessor error Error: failed to preprocess the source. Here's my very simple code: #include <GL/gl.h> #include <GL/glu.h> #include <GL/glut.h> #include <GL/glext.h> #include <time.h> #include <stdio.h> #include <iostream> #include <stdlib.h> using namespace std; const int screenWidth = 640; const int screenHeight = 480; const GLchar* gravity_shader[] = { "#version 140" "uniform float t;" "uniform mat4 MVP;" "in vec4 pos;" "in vec4 vel;" "const vec4 g = vec4(0.0, 0.0, -9.80, 0.0);" "void main() {" " vec4 position = pos;" " position += t*vel + t*t*g;" " gl_Position = MVP * position;" "}" }; double pointX = (double)screenWidth/2.0; double pointY = (double)screenWidth/2.0; void initShader() { GLuint shader = glCreateShader(GL_VERTEX_SHADER); glShaderSource(shader, 1, gravity_shader, NULL); glCompileShader(shader); GLint compiled = true; glGetShaderiv(shader, GL_COMPILE_STATUS, &compiled); if(!compiled) { GLint length; GLchar* log; glGetShaderiv(shader, GL_INFO_LOG_LENGTH, &length); log = (GLchar*)malloc(length); glGetShaderInfoLog(shader, length, &length, log); std::cout << log <<std::endl; free(log); } exit(0); } bool myInit() { initShader(); glClearColor(1.0f, 1.0f, 1.0f, 0.0f); glColor3f(0.0f, 0.0f, 0.0f); glPointSize(1.0); glLineWidth(1.0f); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluOrtho2D(0.0, (GLdouble) screenWidth, 0.0, (GLdouble) screenHeight); glEnable(GL_DEPTH_TEST); return true; } int main(int argc, char** argv) { glutInit(&argc, argv); glutInitDisplayMode(GLUT_DOUBLE | GLUT_RGB); glutInitWindowSize(screenWidth, screenHeight); glutInitWindowPosition(100, 150); glutCreateWindow("Mouse Interaction Display"); myInit(); glutMainLoop(); return 0; } Where am I going wrong? If it helps, I am trying to do this on a Acer Aspire One with an atom processor and integrated Intel video running the latest Ubuntu. It's not very powerful, but then again, this is a very simple shader. Thanks a lot for taking a look!

    Read the article

  • Mono-LibreOffice System.TypeLoadException

    - by Marco
    In the past I wrote a C# library to work with OpenOffice and this worked fine both in Windows than under Ubuntu with Mono. Part of this library is published here as accepted answer. In these days I discovered that Ubuntu decided to move to LibreOffice, so I tried my library with LibreOffice latest stable release. While under Windows it's working perfectly, under Linux I receive this error: Unhandled Exception: System.TypeLoadException: A type load exception has occurred. [ERROR] FATAL UNHANDLED EXCEPTION: System.TypeLoadException: A type load exception has occurred. Usually Mono tells us which library can't load, so I can install correct package and everything is OK, but in this case I really don't know what's going bad. I'm using Ubuntu oneiric and my library is compiled with Framework 4.0. Under Windows I had to write this into app.config: <?xml version="1.0"?> <configuration> <startup useLegacyV2RuntimeActivationPolicy="true"> <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0,Profile=Client"/> </startup> </configuration> because LibreOffice assemblies uses Framework 2.0 (I think). How can I find the reason of this error to solve it? Thanks UPDATE: Even compiling with Framework 2.0 problem (as expected) is the same. Problem (I think) is that Mono is not finding cli-uno-bridge package (installable on previous Ubuntu releases and now marked as superseded), but I cannot be sure. UPDATE 2: I created a test console application referencing cli-uno dlls on Windows (they are registered in GAC_32 and GAC_MSIL). CONSOLE app static void Main(string[] args) { Console.WriteLine("Starting"); string dir = Path.GetDirectoryName(Assembly.GetExecutingAssembly().Location); string doc = Path.Combine(dir, "Liberatoria siti web.docx"); using (QOpenOffice.OpenOffice oo = new QOpenOffice.OpenOffice()) { if (!oo.Init()) return; oo.Load(doc, true); oo.ExportToPdf(Path.ChangeExtension(doc, ".pdf")); } } LIBRARY: using unoidl.com.sun.star.lang; using unoidl.com.sun.star.uno; using unoidl.com.sun.star.container; using unoidl.com.sun.star.frame; using unoidl.com.sun.star.beans; using unoidl.com.sun.star.view; using unoidl.com.sun.star.document; using System.Collections.Generic; using System.IO; using System; namespace QOpenOffice { class OpenOffice : IDisposable { private XComponentContext context; private XMultiServiceFactory service; private XComponentLoader component; private XComponent doc; public bool Init() { Console.WriteLine("Entering Init()"); try { context = uno.util.Bootstrap.bootstrap(); service = (XMultiServiceFactory)context.getServiceManager(); component = (XComponentLoader)service.createInstance("com.sun.star.frame.Desktop"); XNameContainer filters = (XNameContainer)service.createInstance("com.sun.star.document.FilterFactory"); return true; } catch (System.Exception ex) { Console.WriteLine(ex.Message); if (ex.InnerException != null) Console.WriteLine(ex.InnerException.Message); return false; } } } } but I'm not able to see "Starting" !!! If I comment using(...) on application, I see line on console... so I think it's something wrong in DLL. There I'm not able to see "Entering Init()" message on Init(). Behaviour is the same when LibreOffice is not installed and when it is !!! try..catch block is not executed...

    Read the article

  • Google Drive Update keeps throwing an error when I try to save a thumbnail

    - by Dano64
    The Base64 string checks out fine. I was able to export it to another website and download it again as my image. When I try to do an update using the Drive Javascript api, it just keeps returning this error: Invalidvaluefor:Notavalidbase64bytestring I also true making the string URL safe. Per this page https://google-api-client-libraries.appspot.com/documentation/drive/v2/python/latest/drive_v2.files.html Am I doing something wrong here, the documentation says send Base64, the string is valid and, the string is intact throughout the process, but Google will not accept it? I am using the javascript api, I think there is maybe a bug sending the thumbnail using the javascript api. This is the request Request URL:https://www.googleapis.com/upload/drive/v2/files/?uploadType=multipart Request Method:POST Status Code:400 Bad Request **Request Headers** :host:www.googleapis.com :method:POST :path:/upload/drive/v2/files/?uploadType=multipart :scheme:https :version:HTTP/1.1 accept:*/* accept-encoding:gzip,deflate,sdch accept-language:en-US,en;q=0.8 authorization:Bearer ya29.AHES6ZQr...YXDacdY4 content-length:14313 content-type:multipart/mixed; boundary="--mpart_delim" origin:https://www.googleapis.com x-javascript-user-agent:google-api-javascript-client/1.1.0-beta x-origin:https://app.pinteract.com x-referer:https://app.pinteract.com **Query String Parameters** uploadType:multipart **Request Payload** ----mpart_delim Content-Type: application/json {"id":null,"title":"Test Pinup.pint","mimeType":"application/vnd.pinteract.pint","thumbnail":{"mimeType":"image/png","image":"iVBORw0KGgoAAAANSUh...UVORK5CYII%3D"}} ----mpart_delim Content-Type: application/vnd.pinteract.pint Content-Transfer-Encoding: binary { "header" : {"id":"215A660A"} "members" : [ {"id":"100523752012631912873"} ], "manifest" : [ {"id":"0000","ele":[],"own":"100523752012631912873","dtc":1371679680000,"txt":"&Delta; Created","typ":0} ], "elements" : [ {"id":"0F54","x":560,"y":264,"bak":"#44ff44","own":"100523752012631912873","srt":"544","sta":0,"wid":120,"hgt":120,"dtc":0,"rec":"","txt":"This is Note"} ] } ----mpart_delim-- **Response Headers** content-length:10848 content-type:application/json date:Mon, 01 Jul 2013 14:41:33 GMT server:HTTP Upload Server Built on Jun 25 2013 11:32:14 (1372185134) status:400 Bad Request version:HTTP/1.1 This is the Response { "error": { "errors": [ { "domain": "global", "reason": "invalid", "message": "Invalid value for: Not a valid base64 byte string: iVBORw0KGgoAAAANSUhEUg...AASUVORK5CYII%3D" } ], "code": 400, "message": "Invalid value for: Not a valid base64 byte string: iVBORw0KGgoAAAANSU...lRtkAAAAASUVORK5CYII%3D" } } Raw Base64 String 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"}],"code":400,"message":"Invalidvaluefor:Notavalidbase64bytestring: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 Url Encoded Base64 String iVBORw0KGgoAAAANSUhEUgAAAGAAAABgCAYAAADimHc4AAAAGXRFWHRTb2Z0d2FyZQBBZG9iZSBJbWFnZVJlYWR5ccllPAAADjVJREFUeNrsXX2MHVUVP3fevH27SxfKhyBCsIqoKOhCBBISY5Hyj2JSGuXLP6SJwYAYICgxsUBr1AhqbE2I8Q9jjYE%2FCLFbP4IxVbaIYjAmS0wUC6ELRGy7tPt2t9vd997MPd6Z%2B3Xunfsq1r7tvNe56TAfO2%2FezO93zu%2Fce%2B6ZB0DVqla1qlWtalWrWtWqVrWqVa1qJ1Nj%2FXCTm5%2BbHeUcz9%2B3f25tmvLVSYePIyLIBRhX24yxKXH63Kljw5Ni97UfbVhzpCLgGNs3%2Fjp%2F%2Fr9en72l3UnWCsCvSjrpmQA54Nkq28q3FQn5mucL5OuIsUPi6f5Si6KJVasaT26%2F%2BT1vVgS8hfbl3%2B27br65dE%2Br1VknrH6IIfkjolmh%2FA8hwYJv1lySInYXhXc8W49r235%2B%2ByVPVQQE2lee3n%2Fd3OzS5tZS%2B2oWurlMYgj4qI45HsApCZYAzgFSsU7FfhSx5%2BtxtHnnHR9%2BqiJAtPsnD1y4MLf09aXF9q3ZzTAmb8ohQaKtHEDLkGv9qIBHBbgmICXrlKyjKHoirkWbfn3X%2BEsnLQH37dr3mebs4o8x4WMSfGbAtyQoDSLga8BBeQJqqXE8QQIt12D2syVR2%2BLcxVpcu%2F23d1%2F%2B%2BElFwPdeXB555eWZ7x453LozEvuRtvqMgCyAhm7QyI7Sf7BEcI4mCNP9lBKhrD9R2zkJqVwLWfpOYyje8tSXLlsceAIy8Pf8Y98vOq1kXQZ8JG5By06kLZ%2F5%2Bm8DcEiCMt3XXpCTwN0YkKrYkFu%2F0CfpCSC3M1IEEeILJ0ca9et%2Fc%2FfliwNLQAb%2BSxR8JTkRJUAdy4DOtxCdQGyDb6ALyq0HuEHYyo%2BOAYlaUkVI7hkAk8ON%2BPpd935kceAIMOC3BfjiayUB1gO0FAG4QTjfN9pTjAO0%2F0%2B9ICeDBmGyJDQoEzIyjxCr3YKET%2F7%2BvitWhIRopQh4%2BZ%2F7fyAtX4PPQG%2FX1JLt19Rit8XfIjDb7uftdWqa0Ox8sNfIF%2FCvK4mPFAB6yf4uaPzYYit5dKVwWREC7vrV619sLXU%2BL8Gg4AEBlXgFBdN8JgQ6M%2BfUHJDJNWiQD1yHkXOlDLLMcz53xTf%2FdNtASNBXn5l598y%2B%2Bb%2BL3k2j5gFdU1KkA2%2FkdEOR9IDsOpSCQBN4M%2F3nJuCaOEC03pEhJTuJJ0XtbEHsxBG75PmvXb2nrz3gzZnD2wVCjQgYsUAgVm2lRwdiR6LA9w4lS2YNnlcRq%2FavB653MfrdnueJf%2FXllP%2BkryXozl%2B%2BtoF30o9GnoVrvZU9HtINNaD44BFgHSmx4DP%2FswRkKz9F3WcGCOt9NQ0MwtWXbnn2xr4loL2cbNYDLAdcQgTz9FpbtAaUERANsJEFklHvIOMISiBzrqlJD4w%2FyKJJEL2lh%2FqSgDt2vrohTdJL%2FQdzBlvMtUQ6Io6cXgwBngZWD%2FxIeZVeM49o5g30KEGh%2B1Td4g%2B8f%2FMfbuw7Atotbf0EVOchmQuGts5APsh4UNCbSBoDPE%2FoYt3B48zekzEIVF7Ae%2BcFPSHgCxOvXpwm%2FFLHslQ6GZgLfNfFk54iuMwhyAf2aJLTfcHg8cwLLnzwmQ%2F2DQFCem4pgOR4gzviLQDD3gIRzE1h%2BPshyaEB3wPYORccImVyUHR1P9s3BCSd9CZ%2FsOFPsjCV4ymkHViYCJOmYEV5co8xF1DnHrDwfe6cg1wzdZCRE8WY4tN9QYAY9Z4rBj7vzZNpiMWRHqJ5yKMCQcBg3cgJkpFPzjtkRw7x%2BruwqxQBkUxNnGgXXbBp8rzSE3BksT3uZDDJUJahD7hKsGFACug%2BCx8vegQWRtEsOOzHwO1h8WEQncOiSzpeegLaneQqB2wMEKHWGHhgigUzs2FYsHyAcNzonmfBgneZBfDoORk03nlF6QkQffCL3WdFM4uFSLUWHcuzTqPrTtCdkvSMlwb5ozZVPQHo3g8L%2BqgjOZ7t5HvHvScUH%2FceUMrPrmkTzW%2BagbRrZswIkXmGKHUbPWCQWDH6shUK8n4g9aVQGQFT3%2BkYguGdGAoWHOas0nsAqowlnbUyD%2BBPpoNX56M%2FR7wAzHkItjLCDaQO1gZXBOcQ3Tego4dzYAsBMBw5yukB8o6ZARiVZSs7l8e8NSOKr60euwRM39J1bZBZG%2FKsRTuxhRoE%2BQ6T3gZqNPk0pWUXsfwEaA%2FIHyQHX1sZM%2FCiY9OWLH0GJ66ZSwYJuoYgDxMj9QiFeiFbzIWGA3oOBKrvdIWF9j9Z8NUPHoBoQUVq7RJsbnpCTIFNgEeZUANFghmZogWeYVG6bAmirYqgJSwFItC3eNdwqIdwpN7SBx7A0YZdRCo1ECQiMlYvk3WcDJAi7QGBYAzepDyqSXlTpKXWEPAI7sQk7RmWJFPeqGXInNcHHtBKUhiJa%2FKBsoq0CBSwQJIENg2RP7AqyNIdpYhYnfYI9KYo%2FSlJWxdKSSHgBTyAQzfZcqc9OfGG0veC4ijaTcsEgdZskqo1W7%2FjVrbpEhL6N7kPzpwu99dqHljPDaNXqGuvby0cQyQpY%2BEK8BSsV4i2u%2FQecLjdmR4biq2Gc5WCZmgSXJwzKeYkqqKyfDqyjZT12VEtFrqZ6FTC0bJ0S7AGMD8PSB2R8RjrOUhK3FPQniIlSpAxXXoCFlrJ1Kp6rLScmVElU2gzf5TFbJIMzawYM8GWBXI4tEoaObrvB5A6UBMLPI8qWj6aLmdeyqjApx6QSqKmjjdePSlL%2BdQPX5gdjqPVea2OKqqyBVFuXZCukgOg9TvZMVuamGc3%2FRJFJAMsXqyOowW53CtF0UW6VtK4qpgGaIvtlrhOS6yz8hS5na2xefDha0%2Fvg4FYrsUT4v5vy1PD3JUfSjnKMZvt66PNxWA%2Bk8VtahjdHhCQFzVoebpTC0S2uV%2B2SOOCkSFl%2FWitPy9hlN4x0TcTMjOLrZ1GRwMFsno77yVxWjzlWqUTfNH%2Fu1to637GBT8%2Fjxbr6uCOhBR1TqplCKTscNDygzt7gVXPKuM%2B8ejUbKOWyRCt61TlHqYQihVKSY7%2Bloy0eqZAgkCRrl8d7b8Zk5rXlVSlnC5bF8dasiJOV8Zp6RHb0DzUA%2FnpmQfkwXi5s80CwF2rRbdc0PEQ9eJEwdqJ9yQFj%2BHBc5MA%2BNx5m9LuJ0R%2B8hhhJCgnd1uvcOoZAS%2Fsn9sqBmVNCnoIzAJwafdj%2BuUKnvKuwCeBgCutHozM%2BDEhUYDbNSgScu1vit2tfUfA%2FCPrmgvtRHqBM4gCByBOQKTAUPAl8FwAb4tpE97dS5JuZFNZUtadKsATQ4RYAIhHwLameJa%2BIyBrfzswv3WxI7yASIEPjvumilpS1xMK3UjHe3xC1DXQexmDyhEJwh2OLviuJwjgcWsvMep5efr4t55b%2F%2FZThnbk4wBw%2B%2F6F2n3wS0v8EnUyIYM0tex1Q8l26qUkUjViThT4HZSLDLyQB9%2BODLzZuTcI65%2FoawKyduW3%2F7zj9OH6%2BihEgDcA82t3GEBxMkQBqntFvPC%2BMDjdS5qm0IGWgt%2FRwKveT7Yvjk8I8G%2FoNTbxShDw4qHDGz901tia0bg2jirvo9fcIQC7lJ%2Bgk6RHPdEPUMhcOj9ZAMW353O5kgAroNU2pxKUpxw2rgQ2K%2FaS3jsf3D1%2B%2Fqrhp0fE2MCkIzwJ6lYy6Fu%2FJcCf8QqMB8Baf6JAT8i2lp9EyY441hSfuWbukXVTA0VATsIDu8fPO6Xx9HBGAi1NJ2XkAMUKtcKcJ523JeBz5ycLbMo5VUDbtZYgua%2FBF72fpvjMNc0VAn%2FFCcjaBQ9Mjr9jtJF7An1zhQZiO0VvM6VQSEdbDwCPACpDKenVpMbybW9Hb2ejXfHpFQX%2FhBCQk7Bpcvzs4aEdo3G0hr4fHEGoiNdNRdOUhEuElSOdTEvABt2EkNFx%2Bv3CCwCmUfZ4plYaixP2Yx2n3r9r9QWnNHasrsdrQ68KwX8hAOiEjJ421H18oGkFRQSXg6%2BO7gUZr4BJcYUbejnYKiUBuq3ZNHnPGY36Q42IrWYBL2B%2B4Szt%2F2vZAfJDTd6kigZeSw7J82R6v2X2kXVbT%2BTzl%2BIHm4Q3rDlnuP6Q6KbeVjfxAPWbis7NojcdqSfWubJ8riUIrAfo1ENiPAS2i2NbRE9n%2BkQ%2Fe6l%2Bsuw0QcSZwhtEL8kQQUvbTb0aLec0lk9Gv2AHYwkhQvzbLpYthx6%2Bdrosz1zKH%2B3LPGIsrq2PDu79%2FvA5F8p3igMEAFjZQV%2BCrCxNicM%2FFdY%2FUQaL7wsCdBsZGcH6GefB2EVXwsi574Pa294FSeM0aNVPpeMyFYQRhtrzEC0dgnTmFWi9sQcW9k5NLr2x5%2BPQm7ra%2FklF%2FF8WcngG4r1%2FhLG5F%2BHsQ%2BfA6OgoDDUaEMdx9rtv0vLTFNqdDrSWl2FhYQEOHNgPyeysCLOzzAsfpWsRDH5jZfb2gSQA3fQFKzMJJ4sHlJaEeFA9QHlB6G1YLFNMGGAPQPqMrKyeEMNgN5pg5V08AU6kNwwsASQQUy%2FnXdzkhElSPODgs4DMhkioPKA3RJgfvwoFCN6FkIqA4xwDQgTo90eSKgj3oHGe0q5oHBgVZwR0ql5Qz2MAhjwg%2B2O7Goj1VvtpD6jugb8AJUrMDagEcToSjgn48yCrzkvTBjYZx7khoK6e82AZgu5JQ4Bqi%2BoZ%2F10m3e8bAgSQE8dOQE7CJMh3e5fL%2BoylJiCKom3HSoBYDqdp%2BpjYLfX%2FTa%2FUBBw5cmSSMbb1WAhgLNqYJMnLZZfL0seAZrN5rwDzfyGhWa%2FXNx48%2BOaT%2FRCv%2BiIIT0%2FvvbfRaFwjvOFoMSErLdxeq9Uu27v3le390mFg0IftpptvXetURXDefPyxn01B1apWtapVrWpVq1rVqla1t9L%2BI8AAvydNUrElRtkAAAAASUVORK5CYII%3D

    Read the article

  • AES BYTE SYSTOLIC ARCHITECTURE.

    - by anum
    we are implementing AES BYTE SYSTOLIC ARCHITECTURE. CODE:- module key_expansion(kld,clk,key,key_expand,en); input kld,clk,en; input [127:0] key; wire [31:0] w0,w1,w2,w3; output [127:0] key_expand; reg[127:0] key_expand; reg [31:0] w[3:0]; reg [3:0] ctr; //reg [31:0] w0,w1,w2,w3; wire [31:0] c0,c1,c2,c3; wire [31:0] tmp_w; wire [31:0] subword; wire [31:0] rcon; assign w0 = w[0]; assign w1 = w[1]; assign w2 = w[2]; assign w3 = w[3]; //always @(posedge clk) always @(posedge clk) begin w[0] <= #1 kld ? key[127:096] : w[0]^subword^rcon; end always @(posedge clk) begin w[1] <= #1 kld ? key[095:064] : w[0]^w[1]^subword^rcon; end always @(posedge clk) begin w[2] <= #1 kld ? key[063:032] : w[0]^w[2]^w[1]^subword^rcon; end always @(posedge clk) begin w[3] <= #1 kld ? key[031:000] : w[0]^w[3]^w[2]^w[1]^subword^rcon; end assign tmp_w = w[3]; aes_sbox u0( .a(tmp_w[23:16]), .d(subword[31:24])); aes_sbox u1( .a(tmp_w[15:08]), .d(subword[23:16])); aes_sbox u2( .a(tmp_w[07:00]), .d(subword[15:08])); aes_sbox u3( .a(tmp_w[31:24]), .d(subword[07:00])); aes_rcon r0( .clk(clk), .kld(kld), .out_rcon(rcon)); //assign key_expand={w0,w1,w2,w3}; //assign key_expand={w0,w1,w2,w3}; always@(posedge clk) begin if (!en) begin ctr<=0; end else if (|ctr) begin key_expand<=0; ctr<=(ctr+1)%16; end else if (!(|ctr)) begin key_expand<={w0,w1,w2,w3}; ctr<=(ctr+1)%16; end end endmodule problem:verilog code has been attached THE BASIC problem is that we want to generate a new key after 16 clock cycles.whereas initially it would generate a new key every posedge of clock.in order to stop the value from being assigned to w[0] w[1] w[2] w[3] we implemented an enable counter logic as under.it has enabled us to give output in key_expand after 16 cycles but the value of required keys has bin changed.because the key_expand takes up the latest value from w[0],w[1],w[2],w[3] where as we require the first value generated.. we should block the value to be assigned to w[0] to w[3] somehow ..but we are stuck.plz help.

    Read the article

  • Did I find a bug in PHP's `crypt()`?

    - by Nathan Long
    I think I may have found a bug in PHP's crypt() function under Windows. However: I recognize that it's probably my fault. PHP is used by millions and worked on by thousands; my code is used by tens and worked on by me. (This argument is best explained on Coding Horror.) So I'm asking for help: show me my fault. I've been trying to find it for a few days now, with no luck. The setup I'm using a Windows server installation with Apache 2.2.14 (Win32) and PHP 5.3.2. My development box runs Windows XP Professional; the 'production' server (this is an intranet setup) runs Windows Storage Server 2003. The problem happens on both. I don't see anything in php.ini related to crypt(), but will happily answer questions about my config. The problem Several scripts in my PHP app occasionally hang: the page sits there on 'waiting for localhost' and never finishes. Each of these scripts uses crypt to hash a user's password before storing it in the database, or, in the case of the login page, to hash the entered password before comparing it to the version stored in the database. Since the login page is the simplest, I focused on it for testing. I repeatedly logged in, and found that it would hang maybe 4 out of 10 times. As an experiment, I changed the login page to use the plain text password and changed my password in the database to its plain text version. The page stopped hanging. I saw that PHP's latest version lists this bugfix: Fixed bug #51059 (crypt crashes when invalid salt are [sic] given). So I created a very simple test script, as follows, using the same salt given in an official example: $foo = crypt('rasmuslerdorf','r1'); echo $foo; This page, too, will hang, if I reload it like crazy. I only see it hanging in Chrome, but regardless of browser, the effect on Apache is the same. Effect on Apache When these pages hang, Apache's server-status page (which I explained here, regarding a different problem) increments the number of requests being processed and decrements the number of idle workers. The requests being processed almost all have a status of 'Sending Reply,' though sometimes for a moment they will show either 'Reading request' or 'keepalive (read).' Eventually, Apache may crash. When it does, the Windows crash report looks like this: szAppName: httpd.exe szAppVer: 2.2.14.0 szModName: php5ts.dll szModVer: 5.3.1.0 // OK, this report was before I upgraded to PHP 5.3.2, // but that didn't fix it offset: 00a2615 Is it my fault? I'm tempted to file a bug report to PHP on this. The argument against it is, as stated above, that bugs are nearly always my fault. However, my argument in favor of 'it's PHP's fault' is: I'm using Windows, whereas most servers use Linux (I don't get to choose this), so the chances are greater that I've found an edge case There was recently a bug with crypt(), so maybe it still has issues I have made the simplest test case I can, and I still have the problem Can anyone duplicate this? Can you suggest where I've gone wrong? Should I file the bug after all? Thanks in advance for any help you may give.

    Read the article

  • CakeDC Users Plugin - I Can't Send Emails

    - by JimBadger
    I apologise for the rambling nature of this question, please bear with me and I'll provide all the extra info needed for you to stop me going mad from failing at something that looks inherently very straightforward... I've just installed CakePHP 2.2, and the first thing I've done is add the cakeDC Users plugin. It's all working, apart from sending an email verification when a user registers. I've tried so many combinations of different things in email.php, that I have now utterly got my knickers in a twist. Whatever I do, when the verification email should be sent, all I get is: No connection could be made because the target machine actively refused it. My email.php currently looks like this: class EmailConfig { public $default = array( 'transport' => 'Smtp', 'from' => '[email protected]', //'charset' => 'utf-8', //'headerCharset' => 'utf-8', ); public $smtp = array( 'transport' => 'Smtp', 'from' => array('Blah <[email protected]>' => 'Chimp'), 'host' => 'ssl://smtp.gmail.com', 'port' => 465, 'timeout' => 30, 'username' => '[email protected]', 'password' => 'secret', 'client' => null, 'log' => false, //'charset' => 'utf-8', //'headerCharset' => 'utf-8', ); public $fast = array( 'from' => '[email protected]', 'sender' => null, 'to' => null, 'cc' => null, 'bcc' => null, 'replyTo' => null, 'readReceipt' => null, 'returnPath' => null, 'messageId' => true, 'subject' => null, 'message' => null, 'headers' => null, 'viewRender' => null, 'template' => false, 'layout' => false, 'viewVars' => null, 'attachments' => null, 'emailFormat' => null, 'transport' => 'Smtp', 'host' => 'blah.net', 'port' => 25, 'timeout' => 30, 'username' => 'user', 'password' => 'secret', 'client' => null, 'log' => true, //'charset' => 'utf-8', //'headerCharset' => 'utf-8', ); } How do I get cakeDC Users plugin to just send a non-SMTP email? Or do I have to use, for example, my Gmail details? But, if I do have to go down the SMTP route, what is wrong with the above? Other info: I'm using the latest version of XAMPP and my PHP install is ssl enabled.

    Read the article

  • C++ MySQL++ Delete query statement brain killer question

    - by shauny
    Hello all, I'm relatively new to the MySQL++ connector in C++, and have an really annoying issue with it already! I've managed to get stored procedures working, however i'm having issues with the delete statements. I've looked high and low and have found no documentation with examples. First I thought maybe the code needs to free the query/connection results after calling the stored procedure, but of course MySQL++ doesn't have a free_result method... or does it? Anyways, here's what I've got: #include <iostream> #include <stdio.h> #include <queue> #include <deque> #include <sys/stat.h> #include <mysql++/mysql++.h> #include <boost/thread/thread.hpp> #include "RepositoryQueue.h" using namespace boost; using namespace mysqlpp; class RepositoryChecker { private: bool _isRunning; Connection _con; public: RepositoryChecker() { try { this->_con = Connection(false); this->_con.set_option(new MultiStatementsOption(true)); this->_con.set_option(new ReconnectOption(true)); this->_con.connect("**", "***", "***", "***"); this->ChangeRunningState(true); } catch(const Exception& e) { this->ChangeRunningState(false); } } /** * Thread method which runs and creates the repositories */ void CheckRepositoryQueues() { //while(this->IsRunning()) //{ std::queue<RepositoryQueue> queues = this->GetQueue(); if(queues.size() > 0) { while(!queues.empty()) { RepositoryQueue &q = queues.front(); char cmd[256]; sprintf(cmd, "svnadmin create /home/svn/%s/%s/%s", q.GetPublicStatus().c_str(), q.GetUsername().c_str(), q.GetRepositoryName().c_str()); if(this->DeleteQueuedRepository(q.GetQueueId())) { printf("query deleted?\n"); } printf("Repository created!\n"); queues.pop(); } } boost::this_thread::sleep(boost::posix_time::milliseconds(500)); //} } protected: /** * Gets the latest queue of repositories from the database * and returns them inside a cool queue defined with the * RepositoryQueue class. */ std::queue<RepositoryQueue> GetQueue() { std::queue<RepositoryQueue> queues; Query query = this->_con.query("CALL sp_GetRepositoryQueue();"); StoreQueryResult result = query.store(); RepositoryQueue rQ; if(result.num_rows() > 0) { for(unsigned int i = 0;i < result.num_rows(); ++i) { rQ = RepositoryQueue((unsigned int)result[i][0], (unsigned int)result[i][1], (String)result[i][2], (String)result[i][3], (String)result[i][4], (bool)result[i][5]); queues.push(rQ); } } return queues; } /** * Allows the thread to be shut off. */ void ChangeRunningState(bool isRunning) { this->_isRunning = isRunning; } /** * Returns the running value of the active thread. */ bool IsRunning() { return this->_isRunning; } /** * Deletes the repository from the mysql queue table. This is * only called once it has been created. */ bool DeleteQueuedRepository(unsigned int id) { char cmd[256]; sprintf(cmd, "DELETE FROM RepositoryQueue WHERE Id = %d LIMIT 1;", id); Query query = this->_con.query(cmd); return (query.exec()); } }; I've removed all the other methods as they're not needed... Basically it's the DeleteQueuedRepository method which isn't working, the GetQueue works fine. PS: This is on a Linux OS (Ubuntu server) Many thanks, Shaun

    Read the article

  • Error when opening .tar.gz via Shell to install Apache Maven

    - by adamsquared
    Thank you in advance for the help. My Goal: To install apache maven per its websites instructions (http://maven.apache.org/download.html), in order to install the JUNG package according to its install instructions (http://sourceforge.net/apps/trac/jung/wiki/JUNGManual), so I can use the JUNG classes in various Java GUIs. The Problem: I get an error message when I try to extract the apache-maven .gz (install?) file in shell. Background: I'm trying to install the JUNG (http://jung.sourceforge.net/index.html) package to my system's Java, so I can write object-oriented code using various GUIs (Ecliplse, Dr. Java) using the classes in JUNG. I don't understand how the building/installing process works, and how I can get what I build/install to work on various GUIs and the command line. I'm new to shell and the command line, and mostly have experience using a simple IDE (DrJava, Python IDLE, R GUI) to write and compile object-oriented code. Machine: Mac OSX 10.5.8 32-bit. The Instructions: For the maven building Extract the distribution archive, i.e. apache-maven-3.0.4-bin.tar.gz to the directory you wish to install Maven 3.0.4. These instructions assume you chose /usr/local/apache-maven. The subdirectory apache-maven-3.0.4 will be created from the archive. ... for the JUNG installation Appendix: How to Build JUNG This is a brief intro to building JUNG jars with maven2 (the build system that JUNG currently uses). First, ensure that you have a JDK of at least version 1.5: JUNG 2.0+ requires Java 1.5+. Ensure that your JAVA_HOME variable is set to the location of the JDK. On a Windows platform, you may have a separate JRE (Java Runtime Environment) and JDK (Java Development Kit). The JRE has no capability to compile Java source files, so you must have a JDK installed. If your JAVA_HOME variable is set to the location of the JRE, and not the location of the JDK, you will be unable to compile. Get Maven Download and install maven2 from maven.apache.org: http://maven.apache.org/download.html At time of writing (early December 2009), the latest version was maven-2.2.1. Install the downloaded maven2 (there are installation instructions on the Maven website). Follow the installation instructions and confirm a successful installation by typing 'mvn --version' in a command terminal window. Get JUNG ... What I Did: I downloaded the file apache-maven-2.2.1-bin.tar.gz. The JUNG website specified to use apache maven 2. I wanted to stick to the recommended installation instructions, but I couldn't get to /usr on my GUI (i've noticed you click on the MacHD symbol on the desktop its missing several directories/folders that you can see using the shell using the ls command at root directory I couldn't find a way to access the file using my mac GUI. Therefore, I used the shell to navigate to the root directory and then to /usr/local, and used the mkdir command to make the directory apache-maven and entered it. I then moved the file using the mv command. Next I tried extracting the file using tar -zxvf apache-maven-2.2.1-bin.tar.gz. The Error Message: tar: apache-maven-2.2.1/direcoryandfile: Cannot open: No such file or directory ... apache-maven-2.2.1/lib/ext: Cannot mkdir: No such file or directory apache-maven-2.2.1/lib/ext/README.txt tar: apache-maven-2.2.1/lib/ext/README.txt: Cannot open: No such file or directory tar: Error exit delayed from previous errors From what I can tell the archive file is missing some directories or something. I tried deleting the file, redownloading the .tar.gz file from a different mirror and repeating the process. Same result. Thanks again for the help

    Read the article

  • PHP: table structure

    - by A3efan
    I'm developing a website that has some audio courses, each course can have multiple lessons. I want to display each course in its own table with its different lessons. This is my sql statement: Table: courses id, title Table: lessons id, cid (course id), title, date, file $sql = "SELECT lessons.*, courses.title AS course FROM lessons INNER JOIN courses ON courses.id = lessons.cid GROUP BY lessons.id ORDER BY lessons.id" ; Can someone help me with the PHP code? This is the I code I have written: mysql_select_db($database_config, $config); mysql_query("set names utf8"); $sql = "SELECT lessons.*, courses.title AS course FROM lessons INNER JOIN courses ON courses.id = lessons.cid GROUP BY lessons.id ORDER BY lessons.id" ; $result = mysql_query($sql) or die(mysql_error()); while ($row = mysql_fetch_assoc($result)) { echo "<p><span class='heading1'>" . $row['course'] . "</span> </p> "; echo "<p class='datum'>Posted onder <a href='*'>*</a>, latest update on " . strftime("%A %d %B %Y %H:%M", strtotime($row['date'])); } echo "</p>"; echo "<class id='text'>"; echo "<p>...</p>"; echo "<table border: none cellpadding='1' cellspacing='1'>"; echo "<tr>"; echo "<th>Nr.</th>"; echo "<th width='450'>Lesso</th>"; echo "<th>Date</th>"; echo "<th>Download</th>"; echo "</tr>"; echo "<tr>"; echo "<td>" . $row['nr'] . "</td>"; echo "<td>" . $row['title'] . "</td>"; echo "<td>" . strftime("%d/%m/%Y", strtotime($row['date'])) . "</td>"; echo "<td><a href='audio/" . rawurlencode($row['file']) . "'>MP3</a></td>"; echo "</tr>"; echo "</table>"; echo "<br>"; } ?>

    Read the article

  • What does the `forall` keyword in Haskell/GHC do?

    - by JUST MY correct OPINION
    I've been banging my head on this one for (quite literally) years now. I'm beginning to kinda/sorta understand how the foreach keyword is used in so-called "existential types" like this: data ShowBox = forall s. Show s => SB s (This despite the confusingly-worded explanations of it in the fragments found all around the web.) This is only a subset, however, of how foreach is used and I simply cannot wrap my mind around its use in things like this: runST :: forall a. (forall s. ST s a) -> a Or explaining why these are different: foo :: (forall a. a -> a) -> (Char,Bool) bar :: forall a. ((a -> a) -> (Char, Bool)) Or the whole RankNTypes stuff that breaks my brain when "explained" in a way that makes me want to do that Samuel L. Jackson thing from Pulp Fiction. (Don't follow that link if you're easily offended by strong language.) The problem, really, is that I'm a dullard. I can't fathom the chicken scratchings (some call them "formulae") of the elite mathematicians that created this language seeing as my university years are over two decades behind me and I never actually had to put what I learnt into use in practice. I also tend to prefer clear, jargon-free English rather than the kinds of language which are normal in academic environments. Most of the explanations I attempt to read on this (the ones I can find through search engines) have these problems: They're incomplete. They explain one part of the use of this keyword (like "existential types") which makes me feel happy until I read code that uses it in a completely different way (like runST, foo and bar above). They're densely packed with assumptions that I've read the latest in whatever branch of discrete math, category theory or abstract algebra is popular this week. (If I never read the words "consult the paper whatever for details of implementation" again, it will be too soon.) They're written in ways that frequently turn even simple concepts into tortuously twisted and fractured grammar and semantics. (I suspect that the last two items are the biggest problem. I wouldn't know, though, since I'm too much a dullard to comprehend them.) It's been asked why Haskell never really caught on in industry. I suspect, in my own humble, unintelligent way, that my experience in figuring out one stupid little keyword -- a keyword that is increasingly ubiquitous in the libraries being written these days -- are also part of the answer to that question. It's hard for a language to catch on when even its individual keywords cause years-long quests to comprehend. Years-long quests which end in failure. So... On to the actual question. Can anybody completely explain the foreach keyword in clear, plain English (or, if it exists somewhere, point to such a clear explanation which I've missed) that doesn't assume I'm a mathematician steeped in the jargon?

    Read the article

  • Proxy Issues with Javascript Cross Domain RSS Feed Parsing

    - by Amir
    This is my Javascript function which grabs an rss feed via the proxy script and then spits out the 5 latest rss items from the feed along with a link to my stylesheet: function getWidget (feed,limit) { if (window.XMLHttpRequest) { xhttp=new XMLHttpRequest() } else { xhttp=new ActiveXObject("Microsoft.XMLHTTP") } xhttp.open("GET","http://MYSITE/proxy.php?url="+feed,false); xhttp.send(""); xmlDoc=xhttp.responseXML; var x = 1; var div = document.getElementById("div"); srdiv.innerHTML = '<link type="text/css" href="http://MYSITE/css/widget.css" rel="stylesheet" /><div id="rss-title"></div></h3><div id="items"></div><br /><br /><a href="http://MYSITE">Powered by MYSITE</a>'; document.body.appendChild(div); content=xmlDoc.getElementsByTagName("title"); thelink=xmlDoc.getElementsByTagName("link"); document.getElementByTagName("rss-title").innerHTML += content[0].childNodes[0].nodeValue; for (x=1;x<=limit;srx++) { y=x; y--; var shout = '<div class="item"><a href="'+thelink[y].childNodes[0].nodeValue+'">'+content[x].childNodes[0].nodeValue+'</a></div>'; document.getElementById("items").innerHTML += shout; } } Here is the the code from proxy.php: $session = curl_init($_GET['url']); // Open the Curl session curl_setopt($session, CURLOPT_HEADER, false); // Don't return HTTP headers curl_setopt($session, CURLOPT_RETURNTRANSFER, true); // Do return the contents of the call $xml = curl_exec($session); // Make the call header("Content-Type: text/xml"); // Set the content type appropriately echo $xml; // Spit out the xml curl_close($session); // And close the session Now when I try to load this on any domain that's not my site nothing loads. I get no JS errors, but I in the Console tab in firebug I get "407 Proxy Authentication Required" So I'm not really sure how to make this work. The goal is to be able to grab the RSS feed, parse it to grab the titles and links and spit it out into some HTML on any website on the web. I"m basically making a simple RSS widget for my site's various RSS feeds. My Javascript is wack Also, I'm really a beginner with Javascript. I know jQuery pretty well, but I wasn't able to use it in this case, because this script will be embeded on any site and I can't really rely on the jQuery library. So I was decided to write some basic Javascript relying on the default XML parsing options available. Any suggestions here would be cool. Thanks! What's with the x and y They way my site creates RSS feeds is that the first title is actually the RSS feed title. The second title is the title of the first item. The first link is the link to the first item. So when using the javascript to get the title, I had to first grab the first title (which is the RSS title) and then start with the second title that being the first title of the item. Sorry for the confusion, but I don't think this is related to my issue. Just wanted to clarify my code.

    Read the article

  • ASP.MVC 1.0 complex ViewModel not populating on Action

    - by Graham
    Hi, I'm 3 days into learning MVC for a new project and i've managed to stumble my way over the multitude of issues I've come across - mainly about something as simple as moving data to a view and back into the controller in a type-safe (and manageable) manner. This is the latest. I've seen this reported before but nothing advised has seemed to work. I have a complex view model: public class IndexViewModel : ApplicationViewModel { public SearchFragment Search { get; private set; } public IndexViewModel() { this.Search = new SearchFragment(); } } public class SearchFragment { public string ItemId { get; set; } public string Identifier { get; set; } } This maps to (the main Index page): %@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<IndexViewModel>" %> <asp:Content ID="Content1" ContentPlaceHolderID="MainContent" runat="server"> <% Html.BeginForm("Search", AvailableControllers.Search, FormMethod.Post); %> <div id="search"> <% Html.RenderPartial("SearchControl", Model.Search); %> </div> <% Html.EndForm(); %> </asp:Content> and a UserControl: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<SearchFragment>" %> <p> <label for="itemId"> <%= Html.Resource("ItemId") %></label> <%= Html.TextBox("itemId", Model.ItemId)%> </p> <p> <label for="title"> <%= Html.Resource("Title") %></label> <%= Html.TextBox("identifier", Model.Identifier)%> </p> <p> <input type="submit" value="<%= Html.Resource("Search") %>" name="search" /> </p> This is returned to the following method: [AcceptVerbs(HttpVerbs.Post)] public ActionResult Search(IndexViewModel viewModel) { .... } My problem is that when the view model is rehydrated from the View into the ViewModel, the SearchFragment elements are null. I suspect this is because the default model binder doesn't realise the HTML ItemId and Identifier elements rendered inline in the View map to the SearchFragment class. When I have two extra properties (ItemId and Identifier) in the IndexViewModel, the values are bound correctly. Unfortunately, as far as I can tell, I must use the SearchFragment as I need this to strongly type the Search UserControl... as the control can be used anywhere it can operate under any parent view. I really don't want to make it use "magic strings". There's too much of that going on already IMO. I've tried prefixing the HTML with "Search." in the hope that the model binder would recognise "Search.ItemId" and match to the IndexViewModel "Search" property and the ItemId within it, but this doesn't work. I fear I'm going to have to write my own ModelBinder to do this, but surely this must be something you can do out-of-the-box?? Failing that is there any other suggestions (or link to someone who has already done this?) Here's hoping....

    Read the article

  • Recommended integration mechanism for bi-directional, authenticated, encrypted connection in C clien

    - by rcampbell
    Let me first give an example. Imagine you have a single server running a JVM application. This server keeps a collection of N equations, once for each client: Client #1: 2x Client #2: 1 + y Client #3: z/4 This server includes an HTTP interface so that random visitors can type https://www.acme.com/client/3 int their browsers and see the latest evaluated result of z/4. The tricky part is that either the client or the server may change the variable value at any time, informing the other party immediately. More specifically, Client #3 - a C app - can initially tell the server that z = 20. An hour later that same client informs the server that z = 23. Likewise the server can later inform the client that z = 28. As caf pointed out in the comments, there can be a race condition when values are changed by the client and server simultaneously. The solution would be for both client and server to send the operation performed in their message, which would need to be executed by the other party. To keep things simple, let's limit the operations to (commutative) addition, allowing us to disregard message ordering. For example, the client seeds the server with z = 20: server:z=20, client:z=20 server sends {+3} message (so z=23 locally) & client sends {-2} message (so z=18 locally) at the exact same time server receives {-2} message at some point, adds to his local copy so z=21 client receives {+3} message at some point, adds to his local copy so z=21 As long as all messages are eventually evaluated by both parties, the correct answer will eventually be given to the users of the client and server since we limited ourselves to commutative operations (addition of 3 and -2). This does mean that both client and server can be returning incorrect answers in the time it takes for messages to be exchanged and processed. While undesirable, I believe this is unavoidable. Some possible implementations of this idea include: Open an encrypted, always on TCP socket connection for communication Pros: no additional infrastructure needed, client and server know immediately if there is a problem (disconnect) with the other party, fairly straightforward (except the the encryption), native support from both JVM and C platforms Cons: pretty low-level so you end up writing a lot yourself (protocol, delivery verification, retry-on-failure logic), probably have a lot of firewall headaches during client app installation Asynchronous messaging (ex: ActiveMQ) Pros: transactional, both C & Java integration, free up the client and server apps from needing retry logic or delivery verification, pretty straightforward encryption, easy extensibility via message filters/routers/etc Cons: need additional infrastructure (message server) which must never fail, Database or file system as asynchronous integration point Same pros/cons as above but messier RESTful Web Service Pros: simple, possible reuse of the server's existing REST API, SSL figures out the encryption problem for you (maybe use RSA key a la GitHub for authentication?) Cons: Client now needs to run a C HTTP REST server w/SSL, client and server need retry logic. Axis2 has both a Java and C version, but you may be limited to SOAP. What other techniques should I be evaluating? What real world experiences have you had with these mechanisms? Which do you recommend for this problem and why?

    Read the article

  • Removing google mail markers with jquery after getting them from xml

    - by sebastian
    Hi there, I'm trying to create a page that contains a google map. The map is filled with markers from an xml file. I just can't figure out how to remove "old" markers, that don't match the latest user input. At the moment my js stops after the very first xml item. The clearList.push(marker); is supposed to put the generated marker away for later usage. When the user hits the search button I want all markers to be gone and use clearMarkers();. Maybe someone here can help Sebastian Here is my JavaScript: $(document).ready(function() { $("#map").css({height: 650}); var clearList = []; var myLatLng = new google.maps.LatLng(52.518143, 13.372879); MYMAP.init('#map', myLatLng, 11); $("#showmarkers").click(function(e){ clearMarkers(); MYMAP.placeMarkers('markers.xml'); }); }); function clearMarkers() { $(clearList).each(function () { this.setmap(null); }); clearList = []; } var MYMAP = { map: null, bounds: null } MYMAP.init = function(selector, latLng, zoom) { var myOptions = { zoom:zoom, center: latLng, mapTypeId: google.maps.MapTypeId.HYBRID } this.map = new google.maps.Map($(selector)[0], myOptions); this.bounds = new google.maps.LatLngBounds(); } MYMAP.placeMarkers = function(filename) { $.get(filename, function(xml){ $(xml).find("marker").each(function(){ // read values from xml for searching var platzart = $(this).find('platzart').text(); var ort = $(this).find('ort').text(); var open = $(this).find('open').text(); if (platzart =="Kunstrasen" && $('#kunstrasen').attr('checked') || platzart =="Rasen" && $('#rasen').attr('checked') || platzart =="Tartan" && $('#tartan').attr('checked') || platzart =="Boltzplatz" && $('#boltzplatz').attr('checked') ){ // read values from xml for additional info var name = $(this).find('name').text(); var plz = $(this).find('plz').text(); var note = $(this).find('note').text(); var adress = $(this).find('adress').text(); // create a new LatLng point for the marker var lat = $(this).find('lat').text(); var lng = $(this).find('lng').text(); var point = new google.maps.LatLng(parseFloat(lat),parseFloat(lng)); // extend the bounds to include the new point MYMAP.bounds.extend(point); // create new marker var marker = new google.maps.Marker({ position: point, map: MYMAP.map }); clearList.push(marker); // add onclick overlay var infoWindow = new google.maps.InfoWindow(); var html='<strong>'+name+'</strong.><br />'+platzart; google.maps.event.addListener(marker, 'click', function() { infoWindow.setContent(html); infoWindow.open(MYMAP.map, marker); }); } MYMAP.map.fitBounds(MYMAP.bounds); }); }); } Thanks in advance

    Read the article

  • What does a WinForm application need to be designed for usability, and be robust, clean, and profess

    - by msorens
    One of the principal problems impeding productivity in software implementation is the classic conundrum of “reinventing the wheel”. Of late I am a .NET developer and even the wonderful wizardry of .NET and Visual Studio covers only a portion of this challenging issue. Below I present my initial thoughts both on what is available and what should be available from .NET on a WinForm, focusing on good usability. That is, aspects of an application exposed to the user and making the user experience easier and/or better. (I do include a couple items not visible to the user because I feel strongly about them, such as diagnostics.) I invite you to contribute to these lists. LIST A: Components provided by .NET These are substantially complete components provided by .NET, i.e. those requiring at most trivial coding to use. “About” dialog -- add it with a couple clicks then customize. Persist settings across invocations -- .NET has the support; just use a few lines of code to glue them together. Migrate settings with a new version -- a powerful one, available with one line of code. Tooltips (and infotips) -- .NET includes just plain text tooltips; third-party libraries provide richer ones. Diagnostic support -- TraceSources, TraceListeners, and more are built-in. Internationalization -- support for tailoring your app to languages other than your own. LIST B: Components not provided by .NET These are not supplied at all by .NET or supplied only as rudimentary elements requiring substantial work to be realized. Splash screen -- a small window present during program startup with your logo, loading messages, etc. Tip of the day -- a mini-tutorial presented one bit at a time each time the user starts your app. Check for available updates -- facility to query a server to see if the user is running the latest version of your app, then provide a simple way to upgrade if a new version is found. Maximize to multiple monitors -- the canonical window allows you to maximize to a single monitor only; in my apps I allow maximizing across multiple monitors with a click. Taskbar notifier -- flash the taskbar when your backgrounded app has new info for the user. Options dialogs -- multi-page dialogs letting the user customize the app settings to his/her own preferences. Progress indicator -- for long running operations give the user feedback on how far there is left to go. Memory gauge -- an indicator (either absolute or percentage) of how much memory is used by your app. LIST C: Stylistic and/or tiny bits of functionality This list includes bits of functionality that are too tiny to merit being called a component, along with stylistic concerns (that admittedly do overlap with the Windows User Experience Interaction Guidelines). Design a form for resizing -- unless you are restricting your form to be a fixed size, use anchors and docking so that it does what is reasonable when enlarged or shrunk by the user. Set tab order on a form -- repeated tab presses by the user should advance from field to field in a logical order rather than the default order in which you added fields. Adjust controls to be aware of operating modes -- When starting a background operation with, for example, a “Go” button, disable that “Go” button until the operation completes. Provide access keys for all menu items (per UXGuide). Provide shortcut keys for commonly used menu items (per UXGuide). Set up some (global or important or common) shortcut keys without associating to menu items. Allow some menu items to be invoked with or without modifier keys (shift, control, alt) where the modifier key is useful to vary the operation slightly. Hook up Escape and Enter on child forms to do what is reasonable. Decorate any library classes with documentation-comments and attributes -- this allows Visual Studio to leverage them for Intellisense and property descriptions. Spell check your code! What else would you include?

    Read the article

  • can't implement jquery jScrollPane to replace browser's scrollbars

    - by Zack
    I am trying to replace browser's scrollbars with jScrollPane (jQuery), it won't work. Here are two attempts to implement it: a basic attempt, and an attempt to imitate the full page demo for jScrollPane. I've been trying everything I could think of to figure out what didn't work, but couldn't. here is my code: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <title></title> <!-- styles needed by jScrollPane --> <link type="text/css" href="style/jquery.jscrollpane.css" rel="stylesheet" media="all" /> <style type="text/css" id="page-css"> /* Styles specific to this particular page */ html { overflow: auto; } #full-page-container { overflow: auto; } .scroll-pane { width: 100%; height: 200px; overflow: auto; } .horizontal-only { height: auto; max-height: 200px; } </style> <!-- latest jQuery direct from google's CDN --> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js"></script> <!-- the mousewheel plugin --> <script type="text/javascript" src="script/jquery.mousewheel.js"></script> <!-- the jScrollPane script --> <script type="text/javascript" src="script/jquery.jscrollpane.min.js"></script> <script type="text/javascript" id="sourcecode"> $(function () { var win = $(window); // Full body scroll var isResizing = false; win.bind( 'resize', function () { if (!isResizing) { isResizing = true; var container = $('#full-page-container'); // Temporarily make the container tiny so it doesn't influence the // calculation of the size of the document container.css( { 'width': 1, 'height': 1 } ); // Now make it the size of the window... container.css( { 'width': win.width(), 'height': win.height() } ); isResizing = false; container.jScrollPane( { 'showArrows': true } ); } } ).trigger('resize'); // Workaround for known Opera issue which breaks demo (see // http://jscrollpane.kelvinluck.com/known_issues.html#opera-scrollbar ) $('body').css('overflow', 'hidden'); // IE calculates the width incorrectly first time round (it // doesn't count the space used by the native scrollbar) so // we re-trigger if necessary. if ($('#full-page-container').width() != win.width()) { win.trigger('resize'); } }); </script> </head> <body> <div id="full-page-container"> This is the most basic implementation of jScrollPane I could create, if I am not wrong this has all it should take, yet it doesn't work. a little lorem ipsum to make the scrollbars show up: [here come's lot's of lorem ipsum text in the actual page...] </div> </body> </html> The other option is the same, with a link to demo.css and demo.js.

    Read the article

  • CSS Horizontal sub menu - IE 6,7 both dont working, tried with whatever hover.

    - by SHAKTI
    I'm not expert about css menus. But I know basic system to make css menu. I used this system before and works, but this time it is not working. The site is http://www.uniethos.com. Please check this site This menu works with all other latest Browsers. But not with IE 6 & 7. I know IE6 don't support hover except anchor. So before I was using Whatever Hover. But this time it is not working and even with IE7. I don't know why its happening. May be there could be some problem with my css. Please check the css. If you don't have IE 6 or 7 installed you can run one from http://spoon.net/browsers/. Require to install one plugin. The CSS I'm using for the menu is .glossymenu{ background: #B4B3B3; height: 30px; width: 100%; padding: 0; margin: 0; display:inline-block; position:relative; } .glossymenu ul { list-style: none; padding: 0px; margin: 0; padding-left: 0px; } .glossymenu li ul { display:none; position:absolute; width: 80%; top:30px; left:0px; background-color:#5B0C10; border:0px; z-index: 99; } .glossymenu li li a { padding: 0px 10px 0px 10px; } .glossymenu li li a:hover { background : #871016; } .glossymenu li{ float:left; padding: 0; } .glossymenu li a{ float: left; display:block; position:relative; color:#FFF; text-decoration: none; font-family: sans-serif; font-size: 13px; font-weight: bold; padding:0 0 0 16px; /*Padding to accomodate left tab image. Do not change*/ height: 30px; line-height: 30px; text-align: center; cursor: pointer; } .glossymenu li a b{ float: left; display: block; padding: 0 24px 0 8px; /*Padding of menu items*/ } .glossymenu li.current a, .glossymenu li a:hover{ color: #FFF; background: #5B0C10; background-position: left; text-decoration: none; } .glossymenu li a:visited{ text-decoration: none; } .glossymenu ul li:hover ul { display: block; }

    Read the article

  • optimizing the jquery in django

    - by sankar
    I have done the following code which actually dynamically generate the values in the third list box using ajax and jquery concepts. Thoug it works, i need to optimize it. Below is the code i am working on now. <html> <head> <title>Comparison based on ID Number</title> <script src="http://code.jquery.com/jquery-latest.js"></script> </head> <body> {% if form.errors %} <p style="color: red;"> Please correct the error{{ form.errors|pluralize }} below. </p> {% endif %} <form action="/idnumber/" method="post" align= "center">{% csrf_token %} <p>Select different id numbers and the name of the <b> Measurement Group </b>to start the comparison</p> <table align = "center"> <tr> <th><label for="id_criteria_1">Id Number 1:</label></th> <th> {{ form.idnumber_1 }} </th> </tr> <tr> <th><label for="id_criteria_2">Id Number 2:</label></th> <th> {{ form.idnumber_2 }} </th> </tr> <tr> <th><label for="group_name_list">Group Name:</label></th> <th><select name="group_name_list" id="id_group_name_list"> <option>Select</option> </select> </th> </tr> <script> $('#id_idnumber_2').change( function get_group_names() { var value1 = $('#id_idnumber_1').attr('value'); var value2 = $(this).attr('value'); alert(value1); alert(value2); var request = $.ajax({ url: "/getGroupnamesforIDnumber/", type: "GET", data: {idnumber_1 : value1,idnumber_2 : value2}, dataType: "json", success: function(data) { alert(data); var myselect = document.getElementById("group_name_list"); document.getElementById("group_name_list").options.length = 1; var length_of_data = data.length; alert(length_of_data); try{ for(var i = 0;i < length_of_data; i++) { myselect.add(new Option(data[i].group_name, "i"), myselect.options[i]) //add new option to beginning of "sample" } } catch(e){ //in IE, try the below version instead of add() for(var i = 0;i < length_of_data; i++) { myselect.add(new Option(data[i].group_name, data[i].group_name)) //add new option to end of "sample" } } } }); }); </script> <tr align = "center"><th><input type="submit" value="Submit"></th></tr> </table> </form> </body> </html> everything works fine but there is a little problem in my code. (ie) my ajax function calls only when there is a change in the select list 2 (ie) 'id_number_2'. I want to make it call in such a way that which ever select box, the third list box should be updated automatically. Can anyone please help me on this with a possible logical solution

    Read the article

  • Android fill ImageView from URL

    - by Luke Batley
    Hi i'm trying to add an image to an ImageView from a URL i have tried loading it as a bitmap but nothing is showing. so does anyone know what the best method to do this is or what i'm doing wrong? heres my code @Override protected void onCreate(Bundle savedInstanceState) { // TODO Auto-generated method stub super.onCreate(savedInstanceState); //Check Preferences which sets UI setContentView(R.layout.singlenews); TextView headerText = (TextView) findViewById(R.id.header_text); headerText.setText("Latest News"); PostTask posttask; posttask = new PostTask(); posttask.execute(); } public void loadNews(){ newsStr = getIntent().getStringExtra("singleNews"); try { JSONObject obj = new JSONObject(newsStr); content = obj.getString("content"); title = obj.getString("title"); fullName = obj.getString("fullname"); created = obj.getString("created"); NewsImageURL = obj.getString("image_primary"); tagline = obj.getString("tagline"); meta = "posted by: " + fullName + " " + created; URL aURL = new URL("NewsImageURL"); URLConnection conn = aURL.openConnection(); conn.connect(); InputStream is = conn.getInputStream(); /* Buffered is always good for a performance plus. */ BufferedInputStream bis = new BufferedInputStream(is); /* Decode url-data to a bitmap. */ bm = BitmapFactory.decodeStream(bis); bis.close(); is.close(); /* Apply the Bitmap to the ImageView that will be returned. */ Log.v("lc", "content=" + content); Log.v("lc", "title=" + title); Log.v("lc", "fullname=" + fullName); Log.v("lc", "created=" + created); Log.v("lc", "NewsImage=" + NewsImageURL); Log.v("lc", "Meta=" + meta); Log.v("lc", "tagline=" + tagline); } catch (JSONException e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } } public class PostTask extends AsyncTask<Void, String, Boolean> { @Override protected Boolean doInBackground(Void... params) { boolean result = false; loadNews(); publishProgress("progress"); return result; } protected void onProgressUpdate(String... progress) { StringBuilder str = new StringBuilder(); for (int i = 1; i < progress.length; i++) { str.append(progress[i] + " "); } } @Override protected void onPostExecute(Boolean result) { super.onPostExecute(result); Log.v("BGThread", "begin fillin data"); fillData(); } } public void fillData(){ NewsView = LayoutInflater.from(getBaseContext()).inflate(R.layout.newsdetailact, null); TextView Title = (TextView) NewsView.findViewById(R.id.NewsTitle); Title.setText(title); TextView Tagline = (TextView) NewsView.findViewById(R.id.subtitle); Tagline.setText(tagline); TextView MetaData = (TextView) NewsView.findViewById(R.id.meta); MetaData.setText(meta); ImageView NewsImage = (ImageView)NewsView.findViewById(R.id.imageView2); NewsImage.setImageBitmap(bm); TextView MainContent = (TextView) NewsView.findViewById(R.id.maintext); MainContent.setText(content); Log.v("BGThread", "Filled results"); adapter = new MergeAdapter(); adapter.addView(NewsView); setListAdapter(adapter); } }

    Read the article

  • Form submission info showing up in URL and not working

    - by kcurtin
    I am making a Rails 3.1 app and have a signup form that was working fine, but I seemed to have changed something to break it.. I'm using Twitter bootstrap and twitter_bootstrap_form_for gem. I made some change that messed with the formatting of the form fields, but more importantly, when I submit the Sign Up form to create a new User, the information is showing up in the URL and looks like this: EDIT: This is happening in the latest versions of Chrome and Firefox http://localhost:3000/?utf8=%E2%9C%93&authenticity_token=UaKG5Y8fuPul2Klx7e2LtdPLTRepBxDM3Zdy8S%2F52W4%3D&user%5Bemail%5D=kevinc%40example.com&user%5Bpassword%5D=testing&user%5Bpassword_confirmation%5D=testing&commit=Sign+Up Here is the code for the form: <div class="span7"> <h3 class="center" id="more">Sign Up Now!</h3> <%= twitter_bootstrap_form_for @user do |user| %> <%= user.email_field :email, :placeholder => '[email protected]' %> <%= user.password_field :password %> <%= user.password_field :password_confirmation, 'Confirm Password' %> <%= user.actions do %> <%= user.submit 'Sign Up' %> <% end %> <% end %> </div> Here is the code for the UsersController: class UsersController < ApplicationController def new @user = User.new end def create @user = User.new(params[:user]) if @user.save redirect_to about_path, :notice => "Signed up!" else render 'new' end end end Not sure if there is more you need but if so let me know! Thank you! Edit: For debugging I tried specifying :post and also using a plain form_for <%= form_for(@user, :method => :post) do |f| %> <div class="field"> <%= f.label :email %> <%= f.email_field :email %> </div> <div class="field"> <%= f.label :password %> <%= f.password_field :password %> </div> <div class="field"> <%= f.label :password_confirmation %> <%= f.password_field :password_confirmation %> </div> <div class="actions"><%= f.submit "Sign Up" %></div> <% end %> This gives me the same problem as above. Adding routes.rb: Auth31::Application.routes.draw do get "home" => "pages#home" get "about" => "pages#about" get "contact" => "pages#contact" get "help" => "pages#help" get "login" => "sessions#new", :as => "login" get "logout" => "sessions#destroy", :as => "logout" get "signup" => "users#new", :as => "signup" root :to => "pages#home" resources :pages resources :users resources :sessions resources :password_resets end

    Read the article

< Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >