Search Results

Search found 8472 results on 339 pages for 'boot'.

Page 327/339 | < Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >

• Suspend only works once after full power cycle with ASUS P7P55D-E Pro

  - by John Chadwick

  This one is strange. I can't seem to get suspend working more than once per power cycle. When I say "power cycle," I mean the only way to get one proper suspend is to cut power from the power supply and boot back up cold. After the proper suspend, I get a failed suspend, and after all reboots or cold boots until power is cut, suspends fail. I'm using an ASUS P7P55D-E Pro with a Sandy Bridge Core i7, running on Ubuntu Precise repositories and UEFI. I'm running Nouveau from repository (And Gallium3d compiled from git, but that does not come into this since I can avoid OpenGL and it still happens the same way) with a GTX 285 (nv50.) I had to build a custom kernel (3.3) in order for ACPI 5.0 to be supported and make suspend work at all. I compiled it using the latest Ubuntu kernel's config file with the additional entries set to the default options. All packages are up to date. I know these are relatively exotic settings, but I'm hoping maybe I can get some help anyways. The behavior when suspend fails is strange. Upon a proper suspend, all fans turn off and the only led left on, the power led, is blinking. Upon a failed suspend, 1. USB power remains. 2. The power led stays on solid. 3. All fans seem to still be on. 4. I can hear what I believe is the primary harddrive shutting off. 5. Despite USB power remaining, the USB powered keyboard does not respond to anything, and the indicator leds on it shut off. Pressing the power button does nothing, and of course I have not to date found a way to wake it up. When trouble shooting the first round of issues I got with suspend not too long ago, I ended up building a list of modules to disable upon sleeping. Here's my config file for them: In /etc/pm/config.d/01modules: SUSPEND_MODULES="uhci_hd ehci_hd button" All of my other pm configuration files are stock. In case it's any help, here are my relevant BIOS settings. Thanks.

  Read the article

• Windows Setup could not configure Windows to run on this computer's hardware

  - by Hello71

  The whole installation goes smoothly up to the point of "Completing installation ...". The monitor changes resolution, after which a standard dialog box pops up saying Windows Setup could not configure Windows to run on this computer's hardware Then, in a few seconds, the whole machine powers down. Trying to restart produces the message: STOP: c000021a {Fatal System Error} 0x00000000 (0xc0000001 0x00100448) OR it boots into Setup and comes up with the message: Windows Setup encountered an unexpected error... (This is not the actual error, just paraphrasing) I tried using the OEM restore instead of a regular install, but it fails with the same error. (Even though it worked before...) General specs: HP Pavilion Elite e9262f Intel Core i5-750 Processor ATI Radeon HD 4650 Hitachi HDT721010SLA360 ATA Device 6GB DDR3 RAM SuperMulti DVD Burner with LightScribe Some built-in Wi-Fi module http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01916917 I've tried disconnecting the wireless card and disabling the built-in Ethernet and Firewire via the BIOS, and replacing the wireless keyboard and mouse with wired USB ones. Didn't work. I've also tried changing the SATA controller settings in the BIOS to RAID, AHCI, and IDE, reinstalling each time I changed. Still not working. I think the reason why it is showing the Fatal System Error is because it didn't finish installing before it errored out and shut down, so the system is left in an inconsistent state. I've tried 3 different copies (including the OEM restore) of Windows 7 now, and they're all failing at the same point, with the same error message. I've tried to install Windows 7 maybe 10 times already, with the exact same error message at the exact same location. Hm... Interestingly, the 32-bit version of Windows 7 works, but the 64-bit version doesn't. Perhaps it was a badly burned disk? Reburning the 64-bit version still comes up with the same error. Here's a picture of the side of the case that clearly says it came with Windows 7 64-bit, along with the model number and CPU. sudo fdisk -l: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009896f Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 7 HPFS/NTFS /dev/sda2 14 94119 755906445 7 HPFS/NTFS /dev/sda3 119922 121602 13492224 7 HPFS/NTFS /dev/sda4 94120 119922 207257740+ 5 Extended /dev/sda5 119527 119922 3170769 82 Linux swap / Solaris /dev/sda6 107174 119526 99225441 83 Linux /dev/sda7 94120 107173 104856192 7 HPFS/NTFS Partition table entries are not in disk order

  Read the article

• How can I verify that my SSD is performing as it should?

  - by Jon Skeet

  EDIT: Okay, so I've no idea what caused the change, but after trying loads of different things to work out what was wrong, I've rerun the WEI (about the 4th time in total) and the score has jumped to a far more respectable 7.3. I'm going to leave well alone now :) I've got a brand new 256GB SSD (Crucial CT256M225) which should have stellar performance. However, on my (also brand new) Dell Studio 1557 with Windows 7 Professional 64 bit, it's only giving a performance index of 5.9. I realise the performance index should be taken with a bit of a pinch of salt, but I wonder whether something's wrong. Given this paragraph from this MSDN article on Windows 7, I'd expect to see a high 6.X or possible a 7.X figure: In Windows 7, there are new random read, random write and flush assessments. Better SSDs can score above 6.5 all the way to 7.9. To be included in that range, an SSD has to have outstanding random read rates and be resilient to flush and random write workloads. In the Beta timeframe of Windows 7, there was a capping of scores at 1.9, 2.9 or the like if a disk (SSD or HDD) didn’t perform adequately when confronted with our random write and flush assessments. Feedback on this was pretty consistent, with most feeling the level of capping to be excessive. As a result, we now simply restrict SSDs with performance issues from joining the newly added 6.0+ and 7.0+ ranges. SSDs that are not solid performers across all assessments effectively get scored in a manner similar to what they would have been in Windows Vista, gaining no Win7 boost for great random read performance. How can I diagnose any performance issues with either the disk or how Windows 7 is handling it? Are there any particularly good tools you'd recommend? One note of curiosity: I couldn't install the firmware update (to 1916) until I changed my BIOS handling of the drive to ATA mode; after installing the firmware I tried to boot the Windows installation DVD - but that only worked after turning it back to AHCI mode (which I've left it in). Installing Windows 7 took longer than I expected - it sat at the "Windows is loading files" prompt for a very long time. Likewise it was on "Expanding files (0%)" for a long time. Since installation it's been fine though - but I don't know whether it's really providing quite as beefy performance as it should. EDIT: My netbook with the 64GB equivalent drive has a performance index of 6.6...

  Read the article

• Avoid read-write access to bad sectors on HDD to continue working on the HDD

  - by goldenmean

  I have a HP Pavilion dv6446 notebook. It had Windows Vista Home premium. After 4.5+ years of usage, just recently it started malfunctioning. While working fine, its screen goes white or sometimes some thin black lines horizontally. Laptop freezes. Hard reboot works. Again it works for some 2 hrs or so, same error. To diagnose I did run the Memory and Hard disk check which is present in the Bios Setup. Memory test passed. Hard disk test returned an error saying something like - "Replace the hard disk". Bad.. Some sectors or platters have gone bad on the disk. (I confirmed this later by further tests mentioned below) Then I tried installing a Ubuntu 11.10. It listed 3 partitions /dev/sda1, sda2, sda2. It again gave error and could not install grub loader on /dev/sda1. Bad sectors. Then redid the Ubuntu installation, this time asked to to install the Ubuntu on /dev/sda3. and kept /dev/sda1 for /home. Installed fine, and works fine as well. Due to unavailability of WiFi/ Ethernet driver for that adapters under Ubuntu( at least I could not configure them and get the networking working at all), I decided to go back to reinstall windows Vista. It did install fine. I did not have to format one data partition which has my data. I just formatted one partition which installed Windows So in effect HDD has not undergone a full format here. Worked ok for 1 day. But same white screen and freeze happened. Looks like while it is in use, it accesses the bad sectors for storing some data and that's when it bombs. I am inclined to think HDD has not failed fully or crashed but has developed bad sectors. Else if it was a HDD crash, it would have refused to boot at all let alone install on it. Questions: Is there any HDD test check under windows or any such tools windows/linux based ewhere which can identify the bad sectors of the HDD and 'lock/isolate' them from further read-write access of any kind. If not what are my options, if any to salvage this laptop HDD without replacing it. EDIT: Would the Disk Error checking tool under windows help in any way?

  Read the article

• Custom built machine has much higher power consumption than expected

  - by foraidt

  I built a machine according to the specs of a computer magazine (c't, Germany). According to the magazine, the power consumption should be at around 10W. I don't want to go into the specifics of the hardware but rather ask for general advice on where to look: I updated the BIOS/UEFI version to the latest version, installed all the recommended drivers and unplugged all hardware that's not necessary to boot into Windows. All that was left is the power supply, mainboard, cpu, cpu cooler and one SSD drive. But still I measured a power consumption of 50W, which is 40W more than it should be. I tried booting Linux Mint from a USB stick, so I don't think it's some Windows-related problem.. Where else could I look? Update 1 I dind't want the question to get closed for being too localized but if more details are necessary, here they are: The system is a desktop PC. The power consumption is measured using a Brennenstuhl PM 231 device, which was tested also by c't and they found it quite accurate. The PSU is an Enermax ETL300AWT, the mainboard Intel DH87RL (Socket 1150) and the CPU Intel G3220 (Haswell). Update 2 There is no online version of the article*. The most details I found can be read on its project page (in German, though...) (*)You can pay for downloadable PDFs, however. English translation of that project page Update 3 Regarding the sceptics: It may sound ridiculous but apparently 10W idle consumption is possible with Intel's Haswell architecture. As a kind of proof, there's an additional Blog article explicitly listing the steps needed to reduce the idle consumption to 10W. Additional hardware: I measured the consumption without the HDD, and as expected the usage dropped by around 10W. I have no chassis fans and the CPU fan is a "Scythe Mugen 4" model. It runs at around 600rpm so I think it won't draw much. When stripping off all my extra components I should be at 10W. But I'm not getting anywhere near that. I would be happy to see "just" 15W in the stripped down version but currently I'm not getting below 50W no matter which component I remove. As I see it this cannot be explained by the PSU being less efficient at lower consumption. I also waited half an hour or so (also checked that no Windows updates were running in the background) and the consumption dind't drop by more than a few watts.

  Read the article

• Buying a new printer instead of replacing ink?

  - by Kelsey

  With prices of basic printers being around $40 - $50 and a ink cartridge being around $20 - $30 each for black AND color. It costs me more to replace the printer's ink than to just buy a brand new printer. This just seems like a total waste of materials though (I have 4 printers sitting in my basement with no ink). I know the ink cartridges are smaller (not as full) in a new printer but I go through it in about 1 to 1.5 years only and by then my $40 gets me a better printer to boot. Also with certain printers the heads are not part of the ink (Epson use to do this and still might) so I get new heads as well. Is this a bad practice? Are retailers making this a reality when they are selling working hardware cheaper than replacement parts? Is there something more I should be considering? Edit: Some background, long ago I bought an Epson printer which I used to print docs etc vary rarely. The ink started running low so I bought to new carts for around $60 if I recall. The printer then stopped working so I replaced the carts with the new ones but the head was dead on the black which was not worth repairing. I bought a new HP printer for $49. This lasted around 1.5yrs and then the ink ran out, I went to buy new carts and the guy at the store got me to buy a new printer (that was smaller, faster, higher dpi, etc) and it was cheaper than replacing the ink. When the ink ran out on that one I bought a new printer again, etc. The printer gets used maybe once a week at most and I never print photos or anything. It normally is jsut stored away unplugged accumulating dust. People say to buy a laser printer but they are much larger, do not print color, (in the price range I am looking at) and might have the exact same issues. The problem I see is the manufacturer is making my behaviour possible by selling new printers at a loss hoping that they will cash in on the ink later. How can they produce a printer for so cheap which HAS ink in it, and the refills cost more than the unit? It can't.

  Read the article

• "Error loading operating system": Win7/Vista

  - by LookitsPuck

  Hey fellas, Have this computer for about 2 years now. Originally had Vista installed, now have Windows 7 installed. Both on separate hard drives. Also have another drive used strictly for media. About a week ago, the Vista hard drive started going on its way out. Was getting problems on startup. After a few BIOS settings, I was able to get into Windows 7 and everything was fine. However, I started remembering the startup issues, so I deleted the bootup for Vista under msconfig. Didn't restart the computer at that time, though. For a few days, everything was ok. Last night I play a little poker, then hit the hay. I wake up to a good ole "Error loading operating system" on the screen. Just wonderful. Looks like the computer restarted overnight (auto updates, anyone?). So, after a big of finagling and half hearted tries, I can't get past the "Error loading operating system" screen. FWIW, in the BIOS it can see my hard drives fine. So I move on. I get my Windows 7 installation disk to try and do a repair. Go in the BIOS, change boot priority to DVD drive, and we're on our merry way. After loading from the disc, I first try jumping into the "Repair your computer" section. That opens up the System Recovery Options. However, this is where the problem comes into play. I don't see any operating systems here. Nada. What's odd though is if I click on the Load Drivers button, I can see my Windows 7 partition (C:), and can go through the files and folders without issue. What do I do at this point? I can't repair it. It seems like I can traverse the hard drive without issue when in an open dialog in the System Recovery Options, but I'm getting the good ole "Error loading computer" on bootup. Suggestions? Thanks all!!

  Read the article

• PC freezing when used to print labels

  - by Will

  Hi I have a windows XP machine that is used to print labels from a Zebra label printer. It is connected a member of the domain. I am getting reports that when people try to use the computer it will sometimes be frozen to the point where they have to physically shut the machine down and boot to get it responding. (this happens about once a day). I took a look in Event Viewer and nabbed some of these errors out of it: Event Type: Error Event Source: Userenv Event Category: None Event ID: 1054 Date: 11/12/2010 Time: 9:13:04 AM User: NT AUTHORITY\SYSTEM Computer: FS-LABELMACHINE Description: Windows cannot obtain the domain controller name for your computer network. (A socket operation was attempted to an unreachable host. ). Group Policy processing aborted. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: AutoEnrollment Event Category: None Event ID: 15 Date: 11/11/2010 Time: 11:08:25 PM User: N/A Computer: FS-LABELMACHINE Description: Automatic certificate enrollment for local system failed to contact the active directory (0x80072751). A socket operation was attempted to an unreachable host. Enrollment will not be performed. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Hanging application MSACCESS.EXE, version 11.0.8166.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.... SearchIndexer (2420) Unable to write a shadowed header for file C:\Documents and Settings\All Users\Application Data\Microsoft\Search\Data\Applications\Windows\MSS.chk. Error -1032. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Failed auto update retrieval of third-party root list sequence number from: <http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootseq.txt> with error: A connection with the server could not be established For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. I'm not really sure what to make out of this... Thanks for the help in advanced, Will

  Read the article

• Recover harddrive data

  - by gameshints

  I have a dell laptop that recently "died" (It would get the blue screen of death upon starting) and the hard drive would make a weird cyclic clicking noises. I wanted to see if I could use some tools on my linux machine to recover the data, so I plugged it into there. If I run "fdisk" I get: Disk /dev/sdb: 20.0 GB, 20003880960 bytes 64 heads, 32 sectors/track, 19077 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Disk identifier: 0x64651a0a Disk /dev/sdb doesn't contain a valid partition table Fine, the partition table is messed up. However if I run "testdisk" in attempt to fix the table, it freezes at this point, making the same cyclical clicking noises: Disk /dev/sdb - 20 GB / 18 GiB - CHS 19078 64 32 Analyse cylinder 158/19077: 00% I don't really care about the hard drive working again, and just the data, so I ran "gpart" to figure out where the partitions used to be. I got this: dev(/dev/sdb) mss(512) chs(19077/64/32)(LBA) #s(39069696) size(19077mb) * Warning: strange partition table magic 0x2A55. Primary partition(1) type: 222(0xDE)(UNKNOWN) size: 15mb #s(31429) s(63-31491) chs: (0/1/1)-(3/126/63)d (0/1/32)-(15/24/4)r hex: 00 01 01 00 DE 7E 3F 03 3F 00 00 00 C5 7A 00 00 Primary partition(2) type: 007(0x07)(OS/2 HPFS, NTFS, QNX or Advanced UNIX) (BOOT) size: 19021mb #s(38956987) s(31492-38988478) chs: (4/0/1)-(895/126/63)d (15/24/5)-(19037/21/31)r hex: 80 00 01 04 07 7E FF 7F 04 7B 00 00 BB 6F 52 02 So I tried to mount just to the old NTFS partition, but got an error: sudo mount -o loop,ro,offset=16123904 -t ntfs /dev/sdb /mnt/usb NTFS signature is missing. Ugh. Okay. But then I tried to get a raw data dump by running dd if=/dev/sdb of=/home/erik/brokenhd skip=31492 count=38956987 But the file got up to 59885568 bytes, and made the same cyclical clicking noises. Obviously there is a bad sector, but I don't know what to do about it! The data is still there... if I view that 57MB file in textpad... I can see raw data from files. How can I get my data back? Thanks for any suggestions, Solution: I was able to recover about 90% of my data: Froze harddrive in freezer Used Ddrescue to make a copy of the drive Since Ddrescue wasn't able to get enough of my drive to use testdisk to recover my partitions/file system, I ended up using photorec to recover most of my files

  Read the article

• amd gpu but display on intel integrated graphics

  - by pitseeker

  On my Ubuntu 12.04 I connected my monitor to the onboard intel graphics. I'd like to use my ati radeon 6770 for opencl tasks (e.g. bitcoin mining). So far I couldn't figure out how to get the ati driver working. When calling "aticonfig --initial -f" it always writes a new xorg.conf that ignores the intel graphics. At boot time it works only when I attached the monitor to the ati card. So I manually tampered with the xorg.conf and got this: Section "ServerLayout" Identifier "Default Monitor" Screen 0 "myscreen" 0 0 Screen 1 "deadscreen" RightOf "myscreen" EndSection Section "Module" EndSection Section "Monitor" Identifier "Default Monitor" Option "VendorName" "Monitor Vendor" Option "ModelName" "Monitor Name" Option "DPMS" "true" EndSection Section "Monitor" Identifier "null Monitor" Option "Enable" "false" EndSection Section "Device" Identifier "Intel Integrated Graphics" Driver "intel" BusID "PCI:0:2:0" Screen 0 EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "myscreen" Device "Intel Integrated Graphics" Monitor "Default Monitor" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "deadscreen" Device "aticonfig-Device[0]-0" Monitor "null Monitor" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection I think this might be the right way since I see that X tries to start both drivers in /var/log/Xorg.0.log. However the fglrx driver seems crash (end of xorg.0.log): Backtrace: [ 6.625] 0: /usr/bin/X (xorg_backtrace+0x26) [0x7fb5cd41b846] [ 6.625] 1: /usr/bin/X (0x7fb5cd293000+0x18c6ea) [0x7fb5cd41f6ea] [ 6.625] 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7fb5cc5b9000+0xfcb0) [0x7fb5cc5c8cb0] [ 6.625] 3: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so (xdl_xs111_atiddxGetGPUMapInfo+0x1b1) [0x7fb5c88e16b1] [ 6.625] 4: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so (atiddxGetGPUMapInfo+0xd) [0x7fb5c87bcc0d] [ 6.625] 5: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so (0x7fb5ca12d000+0x1ab29) [0x7fb5ca147b29] [ 6.625] 6: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so (0x7fb5ca12d000+0x1cf8c) [0x7fb5ca149f8c] [ 6.625] 7: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so (0x7fb5ca12d000+0x1ee55) [0x7fb5ca14be55] [ 6.626] 8: /usr/bin/X (InitExtensions+0x99) [0x7fb5cd350069] [ 6.626] 9: /usr/bin/X (0x7fb5cd293000+0x3d605) [0x7fb5cd2d0605] [ 6.626] 10: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xed) [0x7fb5cb44e76d] [ 6.626] 11: /usr/bin/X (0x7fb5cd293000+0x3daad) [0x7fb5cd2d0aad] [ 6.626] Segmentation fault at address 0x14 [ 6.626] Caught signal 11 (Segmentation fault). Server aborting [ 6.626] I'd be very happy if someone can give me a hint on how to configure my ATI card while using the integrated graphics for display. Update I used most of jjhughes57 config and successfully booted the X server on intel (keyboard layout is changed though, funnily). Unfortunately the 2nd X server (fglrx) doesn't fully start. It shuts itself down right after starting [ 6.265] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments [ 6.296] (II) UnloadModule: "mouse" [ 6.296] (II) Unloading mouse [ 6.296] (II) UnloadModule: "kbd" [ 6.296] (II) Unloading kbd [ 6.298] (II) fglrx(0): Shutdown CMMQS [ 6.298] (II) fglrx(0): [uki] removed 1 reserved context for kernel [ 6.298] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0x7fbef8209000 [ 6.337] (II) fglrx(0): Interrupt handler Shutdown. [ 6.470] ddxSigGiveUp: Closing log [ 6.470] Server terminated successfully (0). Closing log file. Thanks for any hints what is wrong here.

  Read the article

• Why is mount -a not mounting fuse drive properly when executed remotely (via Fabric)?

  - by Jim D

  This is a weird bug and I'm not sure where it's coming from. Here's a quick run down of what I'm doing. I'm trying to mount a FUSE drive to an Amazon EC2 instance running Ubuntu 10.10 using s3fs (FUSE over Amazon). s3fs is compiled from source according to the instructions etc. I've also added an entry to /etc/fstab so that the drive mounts on boot. Here's what /etc/fstab looks like: # /etc/fstab: static file system information. # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 LABEL=uec-rootfs / ext4 defaults 0 0 /dev/sda2 /mnt auto defaults,nobootwait,comment=cloudconfig 0 2 /dev/sda3 none swap sw,comment=cloudconfig 0 0 s3fs#mybucket /mnt/s3/mybucket fuse default_acl=public-read,use_cache=/tmp,allow_other 0 0 So the good news is that this works fine. On reboot the connection mounts correctly. I can also do: $ sudo umount /mnt/s3/mybucket $ sudo mount -a $ mountpoint /mnt/s3/mybucket /mnt/s3/mybucket is a mountpoint Great, right? Well here's the problem. I'm using Fabric to automate the process of building and managing this instance. I noticed I was getting this error message when using Fabric to build s3fs and set up the mount process: mountpoint: /mnt/s3/mybucket: Transport endpoint is not connected I isolated it down the the problem and built a fabric task that reproduces the problem: def remount_s3fs(): sudo("mount -a") Which does: [ec2-xx-xx-xx-xx.compute-1.amazonaws.com] Executing task 'remount_s3fs' [ec2-xx-xx-xx-xx.compute-1.amazonaws.com] sudo: mount -a [And yes, I was sure to unmount it before running this task.] When I check the mount using mountpoint I get: $ mountpoint /mnt/s3/mybucket mountpoint: /mnt/s3/mybucket: Transport endpoint is not connected Done. But if I run sudo mount -a at the command line, it works. Hrm. Here is that fab task output again, this time in full debug mode: [ec2-xx-xx-xx-xx.compute-1.amazonaws.com] Executing task 'remount_s3fs' [ec2-xx-xx-xx-xx.compute-1.amazonaws.com] sudo: sudo -S -p 'sudo password:' /bin/bash -l -c "mount -a" Again, I get that transport endpoint not connected error. I've also tried copying and pasting the exact command run into my ssh session (i.e. sudo -S -p 'sudo password:' /bin/bash -l -c "mount -a") and it works fine. So...that's my problem. Any ideas?

  Read the article

• file corruption on read/write 2.6.32-22-server (happens across many kernels)

  - by Jonathan

  Hi Guys, I'm having an issue where after the server has been up for a period of time (~week/few days) the server will start reading corrupt data. For instance when I run a sha1sum of a file after a fresh boot it remains the same. However after a while I will start to get segfaults and from then on whenever I read this file I get a different sha1sum. I've checked S.M.A.R.T with long tests and I've run an extended memtest86+(12 passes) My lspci is as follows: 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c) 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3300 Graphics 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller 02:00.0 Ethernet controller: Atheros Communications Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0) 03:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3403 I could really use some help on this, do you have any idea what could cause this? It's really frustrating me as it seems to trigger entirely randomly and will not go away until I reboot. I'm also use KVM for virtualization as well as MD for software RAID on this server and the processor is a Phenom II X4 965. I don't believe it's the software raid however as this affects files also hosted on non-raid partitions so I don't know.

  Read the article

• Hang while starting several daemons

  - by Adrian Lang

  I’m running a Debian Squeeze AMD64 server. Target runlevel after boot is runlevel 2, which includes rsyslogd, cron, sshd and some other stuff, but not dovecot, postfix, apache2, etc. The system fails to reach runlevel 2 with several symptoms: The system hangs at trying to start rsyslogd Booting into runlevel 1 works, then login from the console works Starting rsyslogd from runlevel 1 via /etc/init.d/rsyslog hangs Starting runlevel 2 with rsyslogd disabled works But then, logging in via console fails: I get the motd, and then nothing Starting sshd from runlevel 1 succeeds But then, I cannot login via ssh. Sometimes password ssh login gives me the motd and then nothing, sometimes not even this. Trying to offer a public key seems to annoy the sshd enough to not talk to me any further. When rebooting from runlevel 1, the server hangs at trying to stop apache2 (which is not running, so this really should be trivial). Trying to stop apache2 when logged in in runleve 1 does hang as well. And that’s just the stuff which fails all the time. RAM has been tested, dmesg shows no problems. I have no clue. Update: (shortened) output from rsyslogd -c4 -d called in runlevel 1 rsyslogd 4.6.4 startup, compatibility mode 4, module path '' caller requested object 'net', not found (iRet -3003) Requested to load module 'lmnet' loading module '/user/lib/rsyslog/lmnet.so' module of type 2 being loaded conf.c requested ref for 'lmnet', refcount 1 rsylog runtime initialized, version 4.6.4, current users 1 syslogd.c requested ref for 'lmnet', refcount now 2 I can kill rsyslogd with Strg+C, then. /var/log shows none of the configured log files, though. Update2: Thanks to @DerfK I still have no clue, but at least I narrowed down the problem. I’m now testing with /etc/init.d/apache2 stop (without an apache2 running, of course) which hangs as well and looks like an even more obvious failure. After some testing I found out that a file with one single line: /usr/sbin/apache2ctl configtest /dev/null 2&1 hangs, while the same line executed in an interactive shell works. I was not able to further reduce this line while, i. e. every single part, the stream redirections and the commando itself is necessary to reproduce the hang. @DerfK also pointed me to strace which gave a shallow hint about what kind of hang we have here: wait4(-1for the init scripts futex(0xsomepointer, FUTEX_WAIT_PRIVATE, 2, NULL for rsyslogd / apache2 binaries called by the init scripts The system was installed as a Debian Lenny by my hoster in autumn 2011, I upgraded it to Squeeze immediately and kept it up to date with Squeeze, which then used to be testing. There were no big changes, though. I guess I never tried to reboot the system before.

  Read the article

• Unecrypted Image of Truecrypt-Encrypted System Partition

  - by Dexter

  The general tenor around the internet seems to be that you can't create images of system partitions that have been encrypted (with truecrypt) other than with dd or similar sector-by-sector copy tools. These files however are very impractical given their size (and are obviously incompressible) which makes keeping multiple states/backups of your system partition rather expensive (..especially considering current hdd prices). The problem is that backup tools (like Acronis True Image, Clonezilla, etc.) won't give you the option to create an image of (mounted/opened) Truecrypt partitions, or that there is no recovery environment for restoring the backup, that would allow to run truecrypt before doing any actual restoring. After some trial and error however, I believe I have found a very simple way. Since Truecrypt (running in Linux) creates a virtual block device, that it uses for mounting the unencrypted partitions into the file system, partclone can be used for creating/restoring images. What I did: boot up a linux live disk mount/open the drive/device/partition in truecrypt unmount the filesystem mount point again, like so: umount /media/truecryptX ("X" being the partition number assigend by truecrypt) use partclone (this is what clonezilla would do too, except that clonezilla only offers you to back up real drive partitions, not virtual block devices): partclone.ntfs -c -s /dev/mapper/truecryptX -o nameOfBackupFile for restoring steps 1-3 remain the same, and step 4 is partclone.ntfs -r -s nameOfBackupFile -o /dev/mapper/truecryptX A backup and test-restore of the system (with this method) seems to have worked fine (and the changed settings were reverted to the backup-state). The backup file is ~40 GB (and compressible down to <8GB with 7zip/LZMA2 on the "fast" setting). I can't quite believe that I'm the only one that wants to create images of encrypted drives, but doesn't want to waste 100GB on the backup of one single system state. So my question now is, given how simple this was, and that no one seems to mention anywhere that this is possible - did I miss something? or did I do something wrong? Is there any situation that I didn't think of where this method will fail? Obviously, the backup file needs to be stored in some other encrypted place in order to still remain confidential, since it is unencrypted. Also, in order to do a full "bare metal" restore, one would have to actually first (re-)install Windows, encrypt it, and only then restore the backup file. The funny thing however is that you won't need to backup any partition tables, etc. since the reinstall will effectively take care of that. Is there anything else? This is imho still a lot better than having sector-by-sector images..

  Read the article

• Possible capacitor plague - need help identifying

  - by cornjuliox

  I've been having some PC power issues lately, and I think I've tracked it down to a bad power supply. Lately, when I'm on my PC it will often restart without warning, displaying "Hypertransport sync flood error occurred last boot." once POST finishes. I've googled the error, but can't come to a definitive conclusion as to what's causing it. I've seen posts suggesting that it might be a power supply issue, but nothing conclusive. Here's what I've done so far: -I haven't installed anything suspect within the last 3 months. -I do overclock just a tiny bit, so I tried raising the voltages a little. That didn't work so I brought both CPU multiplier and voltages all back to their default settings, but that didn't solve the problem either. The problem still occurs. -AV scanned the whole system, nothing suspect. -I suspected that it might be a bad power supply so I cracked that open and found the following: I think it might be cap plague, but I'm not sure. It looks more like glue TBH. Could someone help me figure out what might be wrong with this PC? EDIT: Sometimes, after these restarts, I noticed that the GPU fan doesn't spin up, and the single rear case fan that just happens to be connected to the same molex Y-cable as the GFX card doesn't spin up either. Anything to that? EDIT 2: I do use the system quite heavily, but I don't know how that will factor into this. I often play Diablo 3 and EVE Online at the same time, frequently alt-tabbing between the two. I also have Firefox open in the background, sometimes with several tabs, and if I feel like it, I'll mute the in-game sound and open foobar2000 for better music. Could it be that I'm just pushing this thing too hard? EDIT 3: I also noticed something odd. Right before I experience these restarts, my monitor would suffer from very faint lines of static moving across the screen. The monitor is still very much useable, but it is very annoying. Following the restart it disappears, and then would gradually re-appear over the next few days, and then restarts again. I find it to be very odd. System specs for good measure: Orion 600 W PSU AMD Athlon II X3 440 (overclocked to 3.14 ghZ, raised the CPU multiplier to x13 from x10) MSI G40-775 motherboard 1 GB inno3D GTX 550 ti 4 GB DDR3 RAM 500 GB Samsung SATA HD

  Read the article

• Pxe net install Centos with Static IP

  - by Stu2000

  I seem to be unable to perform a kickstart installation of centos5.8 with a netinstall. It correctly gets into the text installer, but keeps sending out a request for the dhcp server and failing. I have tried to manually set the IP everywhere. Here is my pxelinux.cfg file DEFAULT menu PROMPT 0 MENU TITLE Ubuntu MAAS TIMEOUT 200 TOTALTIMEOUT 6000 ONTIMEOUT local LABEL centos5.8-net kernel /images/centos5.8-net/vmlinuz MENU LABEL centos5.8-net append initrd=/images/centos5.8-net/initrd.img ip=192.168.1.163 netmask=255.255.255.0 hostname=client101 gateway=192.168.1.1 ksdevice=eth0 dns=8.8.8.8 ks=http://192.168.1.125/cblr/svc/op/ks/profile/centos5.8-net MENU end and here is my kickstart file: # Kickstart file for a very basic Centos 5.8 system # Assigns the server ip: 192.211.48.163 # DNS 8.8.8.8, 8.8.4.4 # London TZ install url --url http://mirror.centos.org/centos-5/5.8/os/i386 lang en_US.UTF-8 keyboard us network --device=eth0 --bootproto=static --ip=192.168.1.163 --netmask=255.255.255.0 --gateway=192.168.1.1 --nameserver=8.8.8.8,8.8.4.4 --hostname=client1-server --onboot=on rootpw --iscrypted $1$Snrd2bB6$CuD/07AX2r/lHgVTPZyAz/ firewall --enabled --port=22:tcp authconfig --enableshadow --enablemd5 selinux --enforcing timezone --utc Europe/London bootloader --location=mbr --driveorder=xvda --append="console=xvc0" # The following is the partition information you requested # Note that any partitions you deleted are not expressed # here so unless you clear all partitions first, this is # not guaranteed to work part /boot --fstype ext3 --size=100 --ondisk=xvda part pv.2 --size=0 --grow --ondisk=xvda volgroup VolGroup00 --pesize=32768 pv.2 logvol swap --fstype swap --name=LogVol01 --vgname=VolGroup00 --size=528 --grow --maxsize=1056 logvol / --fstype ext3 --name=LogVol00 --vgname=VolGroup00 --size=1024 --grow %packages @base @core @dialup @editors @text-internet keyutils iscsi-initiator-utils trousers bridge-utils fipscheck device-mapper-multipath sgpio emacs Here is my dhcp file: ddns-update-style interim; allow booting; allow bootp; ignore client-updates; set vendorclass = option vendor-class-identifier; subnet 192.168.1.0 netmask 255.255.255.0 { host tower { hardware ethernet 50:E5:49:18:D5:C6; fixed-address 192.168.1.163; option routers 192.168.1.1; option domain-name-servers 8.8.8.8,8.8.4.4; option subnet-mask 255.255.255.0; filename "/pxelinux.0"; default-lease-time 21600; max-lease-time 43200; next-server 192.168.1.125; } } Is it impossible to prevent it asking for a dynamic ip before trying to install from the net? Perhaps there is an error in of my files? My dhcp server is set to ignore client-updates, and is set to only works with one mac address whilst testing.

  Read the article

• Adaptec 5805 not recognized after reboot

  - by Rakedko ShotGuns

  After rebooting the system, the controller is not recognized. It only works if the computer is shut down and turned off. I have recently updated the firmware to "Adaptec RAID 5805 Firmware Build 18948". How do I fix the problem? Configuration summary --------------------------- 1. Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priority High Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1

  Read the article

• Can't save screen resolution setting.

  - by Searock

  Hi, My screen resolution in windows and previous version of Ubuntu (9.04) was 1152 x 864. But in Ubuntu 10.04 it gives me an option of 1024 x 786 and 1360 x 786. I have some how managed to add 1152x684 resolution by using xrandr command. searock@searock-desktop:~$ cvt 1152 864 1152x864 59.96 Hz (CVT 1.00M3) hsync: 53.78 kHz; pclk: 81.75 MHz Modeline "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync searock@searock-desktop:~$ xrandr --newmode "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync searock@searock-desktop:~$ xrandr --addmode S-video 1152x864 xrandr: cannot find output "S-video" searock@searock-desktop:~$ xrandr Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1360x768 59.8 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9 59.9 1152x864_60.00 (0x124) 81.0MHz h: width 1152 start 1216 end 1336 total 1520 skew 0 clock 53.3KHz v: height 864 start 867 end 871 total 897 clock 59.4Hz searock@searock-desktop:~$ xrandr --addmode VGA1 1152x864_60.00 But the problem is when ever I restart my computer I get this message. Could not apply the stored configuration for the monitors. Could not find a suitable configuration of screens. And then it comes back to 1024 x 786 My graphic card details : Intel(R) 82945G Express Chipset Family. Is there any way I can fix this once for all ? Thanks. Edit 1 : rumtscho has suggested me to modify xorg.conf file. But I am not sure what HorizSync means? is it Horizontal frequency ? My monitor model is Acer v173. Here's my specification. So what should be HorizSync and VertRefresh ? Edit 2 : I have edited my Xorg.conf file as follows : Section "Monitor" Identifier "Configured Monitor" HorizSync 30-80 VertRefresh 55-75 EndSection then I added the resolution and restarted my computer and still I am facing the same problem. Is there something that I am missing? Edit 3 : For now I have edited /etc/gdm/Init/Default(gdm startup scripts) to include following xrandr commands, just below line initctl -q emit login-session-start DISPLAY_MANAGER=gdm xrandr --newmode "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync xrandr --addmode VGA1 1152x864_60.00<br/> xrandr -s 1152x864_60.00 This has solved my problem, but this commands have increased my computer's boot time. I think I will have to edit xorg file properly. Edit 4 : Instead of adding this files to gdm startup scripts I have created a shell script and added it to startup (System - Preference - Startup Applications) #!/bin/bash xrandr --newmode "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync xrandr --addmode VGA1 1152x864_60.00 xrandr -s 1152x864_60.00 And don't forget to add execution rights. (Right Click - Properties - Permission - Allow executing file as program)

  Read the article

• Asus M4A79XTD-EVO / AMD Phenom II X4 965 Crashes / BSOD / Hangs / Restarts

  - by Tiby

  I'll try to be as concise as possible because I have a lot to say about my problem, but I'd rather say it when asked or when I feel it's necessary, just to make this initial reading clearer. For about a year and a half I have periods when my system has all the problems in the title (I'll use the word 'crash' for either one). I'll list some patterns and what I tried to do and what were the results, but the list is not exclusive: usually it crashes when a CPU-intensive operation is in progress, like a game or video encoding or HD movie rendering, but also sometimes crashes when I'm doing nothing after a first crash the system is very unstable and sometimes it crashes even during POST, or doesn't boot at all Some months ago I went to a local service (one that you just put your computer on the table and sit there with a guy and trying to figure out the problem, very rare these days) and they used OCCT and it crashed every time he changed some part to test it out (PSU, RAM, video card, HDD). The last one was the CPU. They changed the CPU and it didn't crash any more. Then when they put my CPU back, it also didn't crash. We figured that the trouble was the thermal paste (probably some 2 years old) because it was the only thing changed while testing. Up until 2 weeks ago, I haven't had any more problems. 2 weeks ago the problems reappeared. I changed again the thermal paste, put some Arctic Silver 5, and for about a week everything worked perfect (tried some games, video encoding, no more crashes). But again it started crashing in the same fashion as the first time. But now, instead, I figured out a very odd behaviour: when I start some of the apps above, in most cases it crashes if I start OCCT and turn on the CPU test, and run any of the programs above, it doesn't crash, even if the CPU is on 100% load (and 65-70 degrees Celsius temperature) if I shut down OCCT and continue using the programs, it crashes in a very short period of time (even if the CPU is on 5-10% load and 40 degrees) There are so many patterns and temporary solutions that I figured out in this year and a half period of time, that I can't include them all because I don't know which one are more relevant, but I'll happily provide any details you ask. My system is: CPU: AMD Phenom II X4 965 (3400 MHz - 125W) MB: ASUS M4A79XTD - EVO RAM: Corsair Vengeance 8 GB (2 x 4GB) CL8 1600MHz Video: HIS Radeon HD5770 1GB PSU: Corsair 750W HDD: Western Digital 1TB OS: Win 7 Enterprise 64 BIT (also tried with Windows Server 2008 R2 Trial and Win XP)

  Read the article

• mongodb : Can create new thread on FreeBSD?

  - by user197739

  We experienced some strange thing in our mongodb gridfs platform. The platform actually is a bi Xeon E5 (bi quad core) with 128GB of memory, running on freebsd 9 with a zfs pool dedicated for mongodb. [root@mongofile1 ~]# uname -sr FreeBSD 9.1-RELEASE our /boot/loader.conf vfs.zfs.arc_min="2048M" vfs.zfs.arc_max="7680M" vm.kmem_size_max="16G" vm.kmem_size="12G" vfs.zfs.prefetch_disable="1" kern.ipc.nmbclusters="32768" /etc/sysctl.conf net.inet.tcp.msl=15000 net.inet.tcp.keepidle=300000 kern.ipc.nmbclusters=32768 kern.ipc.maxsockbuf=2097152 kern.ipc.somaxconn=8192 kern.maxfiles=65536 kern.maxfilesperproc=32768 net.inet.tcp.delayed_ack=0 net.inet.tcp.sendspace=65535 net.inet.udp.recvspace=65535 net.inet.udp.maxdgram=57344 net.local.stream.recvspace=65535 net.local.stream.sendspace=65535 we follow the recommendation for the ulimit : [root@mongofile1 ~]# su - mongodb $ ulimit -a cpu time (seconds, -t) unlimited file size (512-blocks, -f) unlimited data seg size (kbytes, -d) 33554432 stack size (kbytes, -s) 524288 core file size (512-blocks, -c) unlimited max memory size (kbytes, -m) unlimited locked memory (kbytes, -l) unlimited max user processes (-u) 5547 open files (-n) 32768 virtual mem size (kbytes, -v) unlimited swap limit (kbytes, -w) unlimited sbsize (bytes, -b) unlimited pseudo-terminals (-p) unlimited This server have a twin (same config exactly) for ReplSet in other data center and we have a virtualized arbiter. Some time, almost 3 days, the process of mongodb exit. The problem begin with: Fri Nov 8 11:27:31.741 [conn774697] end connection 192.168.10.162:47963 (23 connections now open) Fri Nov 8 11:27:31.770 [initandlisten] can't create new thread, closing connection Fri Nov 8 11:27:31.771 [rsHealthPoll] replSet member mongofile2:27017 is now in state DOWN Fri Nov 8 11:27:31.774 [initandlisten] connection accepted from 192.168.10.162:47968 #774702 (20 connections now open) Fri Nov 8 11:27:31.774 [initandlisten] connection accepted from 192.168.10.161:28522 #774703 (21 connections now open) Fri Nov 8 11:27:31.774 [initandlisten] connection accepted from 192.168.10.164:15406 #774704 (22 connections now open) Fri Nov 8 11:27:31.774 [initandlisten] connection accepted from 192.168.10.163:25750 #774705 (23 connections now open) Fri Nov 8 11:27:31.810 [initandlisten] connection accepted from 192.168.10.182:20779 #774706 (24 connections now open) Fri Nov 8 11:27:31.855 [initandlisten] connection accepted from 192.168.10.161:28524 #774707 (25 connections now open) Fri Nov 8 11:27:31.869 [initandlisten] connection accepted from 192.168.10.182:20786 #774708 (26 connections now open) and after many "can create new thread" [root@mongofile1 /usr/mongodb]# tail -n 15000 mongod.log.old |grep "create new thread"|wc 5020 55220 421680 and finish by a magnificent Fri Nov 8 11:30:22.333 [rsMgr] replSet warning caught unexpected exception in electSelf() pure virtual method called Fri Nov 8 11:30:22.333 Got signal: 6 (Abort trap: 6). Fri Nov 8 11:30:22.337 Backtrace: 0x599efc 0x8035cb516 0x599efc <_ZN5mongo10abruptQuitEi+988> at /usr/local/bin/mongod 0x8035cb516 <_pthread_sigmask+918> at /lib/libthr.so.3 Extract of mongodb from top 78126 mongodb 77 20 0 1253G 1449M sbwait 0 0:20 0.00% mongod If I restart the process when it crash, the problem is fixed for almost 3 days. Has anyone seen this before, or know of a fix?

  Read the article

• Use windows 7 inside virtual box,as guest i mean, to create a Windows 7 USB using "Windows 7 USB/DVD Download Tool" ? (Linux as host)

  - by Abel Coto

  I want to download the Windows 7 professional iso (x32), from microsoft, and , i can do two things. Or buy a new burner , as mine doesn't work (i am trying to decide what dvd writer i could buy) or use a usb dongle to copy the iso to it , and install it via usb. I want to install Windows 7 in a netbook that now has debian,and in my pc. I think i have to buy only the license for the pc , as the netbook came with windows 7 preinstalled, so i suppose that i can use that serial to activate the windows , although i don't know how to install windows 7 starter instead of professional (i think if you remove a file from the iso, windows let you choose the edition to install). The problem is that in both pcs there isn't any windows , only debian. My father has a netbook with windows 7 starter, but i think it hasn't antivirus (at least until have the Karspersky Internet security for 3 pcs bought ), and i don't trust to make the usb there , if i don't now that there isn't any virus or malware. So i am trying to find a way of Create a Windows 7 usb installation , to at least be able to install windows 7 in the netbook without a external dvd writer. I know that with dd in linux you can copy a debian.iso to the usb , and then install debian with it (i've done it) using something like dd if=win7.iso of=/dev/sdb, but i don't know if this would work for windows 7 iso,and if dd will correctly copy the iso to the usb. I suppose that if you are able to boot and install windows 7 from the usb , is that the method works,and you can forget of problems later with the windows 7 installation (problems because some files could not be copied or like). So , i remembered that Microsoft created a tool to copy the iso to the usb using windows. So i thought that i could install in my pc , virtual box , as i have VT and 8 GB ram in it, and download the iso from microsoft ,install windows 7 in the virtual machine , and then copy the iso inside the machine , donwload the iso tool, and atach a usb to the pc, connect it to the guest , and use the tool to copy the iso to the USB. But i don't now if is possible to use a virtual machine to do this , or the virtualization could give problems with the usb, or something. I have found some minutes ago this How to make a windows 7 usb flash install media, from linux? The first method (dd) is the one i like more , and i trust more ( i don't now if the second method using ms-sys , works well , and if i can trust it. I understand that a iso is like a .rar , but no compressed,only containing the files ,so mount the iso and cp the data inside perhaps is ok. Although the method i like more is the microsoft one (more because is from microsoft , and i suppose they now what they do ,at least with this usb related thing, than anything). Perhaps worth more to buy a external dvd writer haha ... Should the virtual machine method work ?

  Read the article

• How did what appears to be a virus get on my computer? (explanation of situation enclosed)

  - by Massimo

  My system is Windows XP SP3, updated with the latest patches. The PC is connected to a Cisco 877 ADSL router, which does NAT from the internal network to its single static public IP address. There are no forwarded ports, and the router's management console can only be accessed from the inside. I was doing two things: working on a remote office machine via VPN and browsing some web pages on the Cisco web site. The remote network is absolutely safe (it's a lab network, four virtual servers, no publicly accessible services and no users at all; also, none of what I'm going to describe ever happened there). The Cisco web site... well, I suppose is quite safe, too. Suddenly, something happened. Strange popups appears anywhere; programs claiming they're "antimalware", "antispyware" et so on begins autoinstalling; fake Windows Update and Security Center icons pop up in the system tray. svchost.exe began crashing repeatedly. Then, finally, after some minutes of this... BSOD. And, upon rebooting, BSOD again. Even in safe mode. Ok, that was obviously some virus/trojan/whatever. I had to install a new copy of Windows on another partition to clean things up. I found strange executables, services and DLLs almost anywhere. Amongst the other things, user32.dll and ndis.sys had been replaced. A fake software called "Antimalware Doctor" had been installed. There were services with completely random names or even GUIDs (!), and also ones called "IpSect" and "Darkness". There were executable files without an .exe extension. There were even two boot-class drivers, which I'm quite sure are the ones that finally caused the system to crash. A true massacre. Ok, now the questions: What the hell was that?!? It was something more than a simple virus! How did it manage to attack my computer, as I am behind a firewall and was not doing anything even only potentially harmful on the web at the time?

  Read the article

• Unable to burn Windows ISO from Fedora

  - by user331947

  First of all, English is not my native tongue, so apologies for any mistakes. My computer recently started prompting that it can't launch Windows successfully. So I just choose start Windows normally. Then, I found that the startup freezes at the Windows screen (before the login prompt). I have tried rebooting several times and get the same results. So I just gave up. After few days, I tried to boot up my laptop again. This time it got to the desktop, but it's extremely slow and the icons on my Desktop don't show up. I decided to format the Windows partition and reinstall a new one. (It is usually faster that way since I kept my 400GB+ data on aother partition and programs and the rest in the same partition as Windows). The thing is I get the Windows disc at the moment (Traveling aboard). But I have a Windows 7 disc image on my hard disk. So, I downloaded Ubuntu 14.04 LTS, made a Live USB, and then try to burn the image from Ubuntu. But the program just freezes and I don't know why. I tried several times and it's still the same. So I tried using Fedora instead, just to see if it will work. The Disk Image Writer report something like this. Error unmounting /dev/dm-0: Command-line `umount "/dev/dm-0"' exited with non-zero exit status 32: umount: /: target is busy (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1).) (udisks-error-quark, 14) Also, I tried installing linux on the windows partition. The installation program freezes (both Ubuntu and Fedora). So, I thought that maybe something are wrong with my hard disk. I seek the solution on the internet and found that gparted can be used to format a partition. And it also froze at "Searching /dev/sda/ partition ...". I'm using Lenovo Y570. Spec below. http://www.notebookreview.com/notebookreview/lenovo-ideapad-y570-review-a-lenovo-bestseller/3/ Can anyone suggest a next step in diagnosing and fixing this problem? Thanks in advance.

  Read the article

• Any way to recover ext4 filesystems from a deleted LVM logical volume?

  - by Vegar Nilsen

  The other day I had a proper brain fart moment while expanding a disk on a Linux guest under Vmware. I stretched the Vmware disk file to the desired size and then I did what I usually do on Linux guests without LVM: I deleted the LVM partition and recreated it, starting in the same spot as the old one, but extended to the new size of the disk. (Which will be followed by fsck and resize2fs.) And then I realized that LVM doesn't behave the same way as ext2/3/4 on raw partitions... After restoring the Linux guest from the most recent backup (taken only five hours earlier, luckily) I'm now curious on how I could have recovered from the following scenario. It's after all virtually guaranteed that I'll be a dumb ass in the future as well. Virtual Linux guest with one disk, partitioned into one /boot (primary) partition (/dev/sda1) of 256MB, and the rest in a logical, extended partition (/dev/sda5). /dev/sda5 is then setup as a physical volume with pvcreate, and one volume group (vgroup00) created on top of it with the usual vgcreate command. vgroup00 is then split into two logical volumes root and swap, which are used for / and swap, logically. / is an ext4 file system. Since I had backups of the broken guest I was able to recreate the volume group with vgcfgrestore from the backup LVM setup found under /etc/lvm/backup, with the same UUID for the physical volume and all that. After running this I had two logical volumes with the same size as earlier, with 4GB free space where I had stretched the disk. However, when I tried to run "fsck /dev/mapper/vgroup00-root" it complained about a broken superblock. I tried to locate backup superblocks by running "mke2fs -n /dev/mapper/vgroup00-root" but none of those worked either. Then I tried to run TestDisk but when I asked it to find superblocks it only gave an error about not being able to open the file system due to a broken file system. So, with the default allocation policy for LVM2 in Ubuntu Server 10.04 64-bit, is it possible that the logical volumes are allocated from the end of the volume group? That would definitely explain why the restored logical volumes didn't contain the expected data. Could I have recovered by recreating /dev/sda5 with exactly the same size and disk position as earlier? Are there any other tools I could have used to find and recover the file system? (And clearly, the question is not whether or not I should have done this in a different way from the start, I know that. This is a question about what to do when shit has already hit the fan.)

  Read the article

• Primary/secondary ethernet interfaces via NetworkManager in Ubuntu 9.10

  - by Josh

  I have an Ubuntu 9.10 machine with three ethernet interfaces, eth0, eth1 and eth2. eth2 is connected to a private network. eth0 and eth2 are connected to two different LANs. Either one will provide access to the internet. All three networks have DHCP servers. Using Ubuntu's the default settings (And Gnome), when I boot up all the interfaces are active and my system gets three IP addresses. However any attempt to access the internet results in connection timeouts and other weirdness. I suspect that traffic is going out on one NIC (like eth0) and coming back in on another (like eth1). I'm not sure what's going on. The only way I can access the internet at the moment is to bring two of the devices down with ifdown. How can I configure eth0 as my primary interface so all trafic goes out by default on that interface, while keeping the other two active? Also, I want to make sure Avahi broadcasts properly on all three IPs so that the computers on the LAN of eth1 can still connect to myHostname.local... EDIT: Here's my routing table: Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 172.16.151.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 172.16.30.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.1.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 172.16.30.2 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 10.1.0.1 0.0.0.0 UG 0 0 0 eth1 I want the 172.16.30.2 network to be the primary one and the 10.1.0.0 network to be the secondary one. EDIT2: My nameservers are also incorrect. It seems like Ubuntu is bringing the networks up in order, eth0, then 1, then 2, and the DHCP information from eth1 is overriding eth0, and eth2 is overriding eth1. How can I reverse this so the DHCP information from eth0 is the "master"? EDIT3: This seems to be an issue with Gnome's NetworkManager.

  Read the article

< Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >