Search Results

Search found 2570 results on 103 pages for 'alek sys'.

Page 33/103 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• Windows Server 2008 hangs up while booting

  - by Jim R

  Windows Server 2008 hangs up while booting after Windows update applied several updates. The server is a virtual instance on a Server 2008 Hyper-V host. Other virtual servers are fine, but have not been updated. The normal boot shows the horizontal barber poll forever. When I do a safe boot it also hangs up. With a "Please Wait..." after loading many '.sys' files. The last successfully loaded file listed is: '\Windows\system32\drivers\crcdisk.sys' That is the extent of what I have been able to determine.

  Read the article

• Need to get a file written to a floppy.

  - by dboarman-FissureStudios

  I asked this question over on SO. I have tried dd if=kernel.sys of=/dev/fd0 bs=512 seek=1 to get this file to write to the floppy. It is a kernel shell that must be written to the sector immediately following the bootsector of a disk to boot the PC. No matter what I've tried, for some reason, kernel.sys is not writing to the floppy. I know the bootstrap loader is being written and executed. However, it cannot find the kernel to load the shell. Any ideas on what I am doing wrong? I mean, really, how is it so difficult to get this file written to a floppy? OpenSUSE 11.2

  Read the article

• SQL Server 2005: reclaiming LOB space

  - by AndrewD

  Hello all, I've got an interesting table in one of my DBs that's confusing me. The table in question has a a few LOB type columns (two nvarchar(max) and a text) and it looks like there's some strange space issues going on. from this query: SELECT type_desc, SUM(total_pages) *8 [Size in kb] FROM sys.partitions p JOIN sys.allocation_units a ON p.partition_id = a.container_id WHERE p.object_id = OBJECT_ID('asyncoperationbase') GROUP BY type_desc; I get: type_desc Size in kb IN_ROW_DATA 27936 LOB_DATA 1198144 ROW_OVERFLOW_DATA 0 (there's just under 8000 rows in the table, each row has a data length of ~10k - not counting the LOB data) here's where it gets somewhat interesting: SELECT ( SUM(DATALENGTH(aob.WorkflowState)) + SUM(DATALENGTH(aob.[Message]))+ SUM(DATALENGTH(aob.[Data])) ) / 1024 FROM AsyncOperationBase aob returns: 76617 As I'm reading it - it looks like the ~75mb of LOB data is using over a gig of space to be stored - I would expect some overhead but not quit that much. Thanks, Andrew

  Read the article

• Determining Serial Driver Supported Baud Rates

  - by Jim Fell

  Hello. How can I determine the baud rates supported by my serial driver? My driver details (from the Device Manager) follow, but they do not seem very helpful. I am writing an application that is crashing because I am apparently attempting to to set COM1 to an unsupported baud rate, so I need to know which baud rates the driver does support. Any suggestions would be appreciated. Thanks. Driver files: C:\Windows\system32\drivers\serenum.sys C:\Windows\system32\drivers\serial.sys Provider: Microsoft Corporation File Version: 5.1.2600.5512 (xpsp.080413-2108)

  Read the article

• ignore ipv6 router advertisements for static addresses with bonded interfaces

  - by boran

  I need to attribute static IPv6 addresses (not use autoconfigured addresses, and ignore router advertisements). This can be done as follows for a standard interface like eth0 iface eth0 inet6 static address myprefix:mysubnet::myip gateway myprefix:mysubnet::mygatewayip netmask 64 pre-up /sbin/sysctl -q -w net.ipv6.conf.$IFACE.autoconf=0 pre-up /sbin/sysctl -q -w net.ipv6.conf.$IFACE.accept_ra=0 However, how can this be done for bonded interfaces? using the "all" interface does not work. Systems is Ubuntu 10.04, 2.6.24-24-server. If one uses the above sysctl command for the bond0, the networking hangs on boot, because /proc/sys/net/ipv6/conf/bond0 does not yet exist and cannot be written to. One the system has booted /proc/sys/net/ipv6/conf/bond0 exist, so one solution after booting is to add the following to /etc/rc.local: /sbin/sysctl -q -w net.ipv6.conf.bond0.autoconf=0 /sbin/sysctl -q -w net.ipv6.conf.bond0.accept_ra=0 /etc/init.d/networking restart and this has the desired effect, the autoconfig v6 address disappears. Seems like a bit of a hack though, are there better solutions?

  Read the article

• Mercurial browser on Windows 2003 takes several refreshes before displaying repositories

  - by Tim Murphy

  When attempt to browse my Mercurial repositories it usually takes several refreshes before the repository list is displayed. The configuration is as follows: Windows Server 2003 (Dedicated machine hosted by http://www.server4you.com/. Site has anonymous password protection with self-signed SSL. Mercurial 1.5.3 Python 2.6.5 Python for Windows 32 extensions 214 py2.6 isapi-wsgi 0.4.2 The repositories are being served via ISAPI using the standard hgwebdir_wspi.py file (copy to follow). Other problems with the repository server: Before doing a clone/push/etc I have to browse the repositories first otherwise hg on my local machine can not locate the site. I have one a repository with a large changeset that after a minute or so throw error "abort: error: An existing connection was forcibly closed by the remote host". Will be asking another question for this problem. What can I do to start tracking down this problem? hgwebdir_wsgi.py # Configuration file location hgweb_config = r'C:\Public\Mercurial\WebSite\hgweb.config' # Global settings for IIS path translation path_strip = 0 # Strip this many path elements off (when using url rewrite) path_prefix = 0 # This many path elements are prefixes (depends on the # virtual path of the IIS application). import sys # Adjust python path if this is not a system-wide install #sys.path.insert(0, r'c:\path\to\python\lib') # Enable tracing. Run 'python -m win32traceutil' to debug if hasattr(sys, 'isapidllhandle'): import win32traceutil # To serve pages in local charset instead of UTF-8, remove the two lines below import os os.environ['HGENCODING'] = 'UTF-8' import isapi_wsgi from mercurial import demandimport; demandimport.enable() from mercurial.hgweb.hgwebdir_mod import hgwebdir # Example tweak: Replace isapi_wsgi's handler to provide better error message # Other stuff could also be done here, like logging errors etc. class WsgiHandler(isapi_wsgi.IsapiWsgiHandler): error_status = '500 Internal Server Error' # less silly error message isapi_wsgi.IsapiWsgiHandler = WsgiHandler # Only create the hgwebdir instance once application = hgwebdir(hgweb_config) def handler(environ, start_response): # Translate IIS's weird URLs url = environ['SCRIPT_NAME'] + environ['PATH_INFO'] paths = url[1:].split('/')[path_strip:] script_name = '/' + '/'.join(paths[:path_prefix]) path_info = '/'.join(paths[path_prefix:]) if path_info: path_info = '/' + path_info environ['SCRIPT_NAME'] = script_name environ['PATH_INFO'] = path_info return application(environ, start_response) def __ExtensionFactory__(): return isapi_wsgi.ISAPISimpleHandler(handler) if __name__=='__main__': from isapi.install import * params = ISAPIParameters() HandleCommandLine(params) hgweb.config [paths] / = C:\Public\Mercurial\Repositories\* [web] allow_archive = bz2 gz zip ; Allows archive downloads. allow_push = ######## ; Users that are allowed to push.

  Read the article

• How can I diff two Redhat Linux servers?

  - by Stuart Woodward

  I have two servers that have should have the same setup except for known differences. By running: find / \( -path /proc -o -path /sys -o -path /dev \) -prune -o -print | sort > allfiles.txt I can find a list of all the files on one server and compare it against the list of files on the the other server. This will show me the differences in the names of the files that reside on the servers. What I really want to do is run a checksum on all the files on both of the servers and compare them to also find where the contents are different. e.g find / \( -path /proc -o -path /sys -o -path /dev \) -prune -o -print | xargs /usr/bin/sha1sum Is this a sensible way to do this? I was thinking that rysnc already has most of this functionality but can it be used to provide the list of differences?

  Read the article

• What files should be excluded from a complete Windows backup?

  - by tro

  I'm starting to use CrashPlan to backup my Win 7 PC. I've got it writing to my external HD (for quick local restores) and to CrashPlan Central (for offsite storage). I'd like to backup my entire C:\ drive (the only partition) in a way that: Preserves all of my installed software and configuration, but Avoids backing up log files and other ephemeral / temporary files that are regenerated during normal operation of the OS. Which files and/or directories should I be excluding from backups? I'd like to make this a community wiki, so that we could all contribute towards a definitive list. Here's a list of regular expressions identifying the directories and files that CrashPlan excludes on Windows by default listed at http://support.crashplan.com/doku.php/articles/admin_excludes: .*/(?:42|\d{8,})/(?:cp|~).* (?i).*/CrashPlan.*/(?:cache|log|conf|manifest|upgrade)/.* .*\.part .*/iPhoto Library/iPod Photo Cache/.* .*\.cprestoretmp.* *\.rbf :/Config\\.Msi.* .*/Google/Chrome/.*cache.* .*/Mozilla/Firefox/.*cache.* .*\$RECYCLE\.BIN/.* .*/System Volume Information/.* .*/RECYCLER/.* .*/I386.* .*/pagefile.sys .*/MSOCache.* .*UsrClass\.dat\.LOG .*UsrClass\.dat .*/Temporary Internet Files/.* (?i).*/ntuser.dat.* .*/Local Settings/Temp.* .*/AppData/Local/Temp.* .*/AppData/Temp.* .*/Windows/Temp.* (?i).*/Microsoft.*/Windows/.*\.log .*/Microsoft.*/Windows/Cookies.* .*/Microsoft.*/RecoveryStore.* (?i).:/Config\\.Msi.* (?i).*\\.rbf .*/Windows/Installer.* Other excludes: .*\.(class|obj) .*/hiberfil.sys (?i).*\.tmp (?i).*/temp/ (?i).*/tmp/ .*Thumbs\.db .*/Local Settings/History/ .*/NetHood/ .*/PrintHood/ .*/Cookies/ .*/Recent/ .*/SendTo/

  Read the article

• How to keep time on resumed KVM guest with libvirt?

  - by Hristo Hristov

  On my host I am using libvirt and a KVM guest. When the host is shutting down, libvirt suspends the guest. When the host is starting up, libvirt resumes the guest. The problem is, if the guest is suspended and resumed after 24 hours for example, then the guest time is 24 hours in the past. I thought that maybe the problem is with the clocksource, but it is set to "kvm-clock" already. $ cat /sys/devices/system/clocksource/clocksource0/available_clocksource kvm-clock tsc hpet acpi_pm $ cat /sys/devices/system/clocksource/clocksource0/current_clocksource kvm-clock

  Read the article

• DELL DRAC & Ubuntu VPN Connection

  - by Mikunos

  I am trying to connect to a DELL DRAC card without success by Ubuntu VPN Connection Manager. I have these data: Protocol: PPTP SERVER IP PPTP: 1233.123.123.123 DRAC IP: 192.168.10.25 Subnet: 255.255.0.0 User: myuser Pass: mypass where have I to write these parameters? I have configured the PPTP connection using the graphical tool in Ubuntu 11.10 ... but in the /var/log/syslog I get these messages: Apr 15 11:33:15 shinet NetworkManager[1035]: <info> Starting VPN service 'pptp'... Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 18180 Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN service 'pptp' appeared; activating connections Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN plugin state changed: 3 Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN connection 'Connessione VPN 1' (Connect) reply received. Apr 15 11:33:15 shinet pppd[18182]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded. Apr 15 11:33:15 shinet pppd[18182]: pppd 2.4.5 started by root, uid 0 Apr 15 11:33:15 shinet pppd[18182]: Using interface ppp0 Apr 15 11:33:15 shinet pppd[18182]: Connect: ppp0 <--> /dev/pts/1 Apr 15 11:33:15 shinet NetworkManager[1035]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Apr 15 11:33:15 shinet NetworkManager[1035]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. Apr 15 11:33:15 shinet pptp[18185]: nm-pptp-service-18180 log[main:pptp.c:314]: The synchronous pptp option is NOT activated Apr 15 11:33:46 shinet pppd[18182]: LCP: timeout sending Config-Requests Apr 15 11:33:46 shinet pppd[18182]: Connection terminated. Apr 15 11:33:46 shinet avahi-daemon[1081]: Withdrawing workstation service for ppp0. Apr 15 11:33:46 shinet NetworkManager[1035]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Apr 15 11:33:46 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:46 shinet pppd[18182]: Modem hangup Apr 15 11:33:46 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:51 shinet pppd[18182]: Exit. Apr 15 11:33:51 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:51 shinet NetworkManager[1035]: <info> VPN plugin state changed: 6 Apr 15 11:33:51 shinet NetworkManager[1035]: <info> VPN plugin state change reason: 0 Apr 15 11:33:51 shinet NetworkManager[1035]: <warn> error disconnecting VPN: Could not process the request because no VPN connection was active. Apr 15 11:33:51 shinet NetworkManager[1035]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS. Apr 15 11:33:57 shinet NetworkManager[1035]: <info> VPN service 'pptp' disappeared Thanks

  Read the article

• Why doesn't Ubuntu show my wireless device after updating the kernel?

  - by Jigar Shah

  After an kernel update Ubuntu doesn't show my wireless device. How can I fix this? I checked the syslogs and it says the following: 2010-02-16 19:25:39,913 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver 2010-02-16 19:25:39,940 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:25:46,066 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:25:46,086 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:25:46,162 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:05,451 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:05,480 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:05,506 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:12,496 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:19,870 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:23,398 WARNING: modinfo for module wl failed: ERROR: modinfo: could not find module wl 2010-02-16 19:35:23,399 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver 2010-02-16 19:35:23,432 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted

  Read the article

• Why is my mdadm raid-1 recovery so slow?

  - by dimmer

  On a system I'm running Ubuntu 10.04. My raid-1 restore started out fast but quickly became ridiculously slow (at this rate the restore will take 150 days!): dimmer@paimon:~$ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdc1[2] sdb1[1] 1953513408 blocks [2/1] [_U] [====>................] recovery = 24.4% (477497344/1953513408) finish=217368.0min speed=113K/sec unused devices: <none> Eventhough I have set the kernel variables to reasonably quick values: dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_min 1000000 dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_max 100000000 I am using 2 2.0TB Western Digital Hard Disks, WDC WD20EARS-00M and WDC WD20EARS-00J. I believe they have been partitioned such that their sectors are aligned. dimmer@paimon:/sys$ sudo parted /dev/sdb GNU Parted 2.2 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00M (scsi) Disk /dev/sdb: 2000GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 (parted) unit s (parted) p Number Start End Size File system Name Flags 1 2048s 3907028991s 3907026944s ext4 (parted) q dimmer@paimon:/sys$ sudo parted /dev/sdc GNU Parted 2.2 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00J (scsi) Disk /dev/sdc: 2000GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 I am beginning to think that I have a hardware problem, otherwise I can't imagine why the mdadm restore should be so slow. I have done a benchmark on /dev/sdc using Ubuntu's disk utility GUI app, and the results looked normal so I know that sdc has the capability to write faster than this. I also had the same problem on a similar WD drive that I RMAd because of bad sectors. I suppose it's possible they sent me a replacement with bad sectors too, although there are no SMART values showing them yet. Any ideas? Thanks. As requested, output of top sorted by cpu usage (notice there is ~0 cpu usage). iowait is also zero which seems strange: top - 11:35:13 up 2 days, 9:40, 3 users, load average: 2.87, 2.58, 2.30 Tasks: 142 total, 1 running, 141 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.2%sy, 0.0%ni, 99.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3096304k total, 1482164k used, 1614140k free, 617672k buffers Swap: 1526132k total, 0k used, 1526132k free, 535416k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 45 root 20 0 0 0 0 S 0 0.0 2:17.02 scsi_eh_0 1 root 20 0 2808 1752 1204 S 0 0.1 0:00.46 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.17 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/1 ... dmesg errors, definitely looking like hardware: [202884.000157] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [202884.007015] ata5.00: failed command: FLUSH CACHE EXT [202884.013728] ata5.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [202884.013730] res 40/00:00:ff:59:2e/00:00:35:00:00/e0 Emask 0x4 (timeout) [202884.033667] ata5.00: status: { DRDY } [202884.040329] ata5: hard resetting link [202889.400050] ata5: link is slow to respond, please be patient (ready=0) [202894.048087] ata5: COMRESET failed (errno=-16) [202894.054663] ata5: hard resetting link [202899.412049] ata5: link is slow to respond, please be patient (ready=0) [202904.060107] ata5: COMRESET failed (errno=-16) [202904.066646] ata5: hard resetting link [202905.840056] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [202905.849178] ata5.00: configured for UDMA/133 [202905.849188] ata5: EH complete [203899.000292] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [203899.007096] ata5.00: failed command: IDENTIFY DEVICE [203899.013841] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [203899.013843] res 40/00:00:ff:f9:f6/00:00:38:00:00/e0 Emask 0x4 (timeout) [203899.041232] ata5.00: status: { DRDY } [203899.048133] ata5: hard resetting link [203899.816134] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [203899.826062] ata5.00: configured for UDMA/133 [203899.826079] ata5: EH complete [204375.000200] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204375.007421] ata5.00: failed command: IDENTIFY DEVICE [204375.014799] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204375.014800] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204375.044374] ata5.00: status: { DRDY } [204375.051842] ata5: hard resetting link [204380.408049] ata5: link is slow to respond, please be patient (ready=0) [204384.440076] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204384.449938] ata5.00: configured for UDMA/133 [204384.449955] ata5: EH complete [204395.988135] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204395.988140] ata5.00: failed command: IDENTIFY DEVICE [204395.988147] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204395.988149] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204395.988151] ata5.00: status: { DRDY } [204395.988156] ata5: hard resetting link [204399.320075] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204399.330487] ata5.00: configured for UDMA/133 [204399.330503] ata5: EH complete

  Read the article

• Xen HVM guest has severe clock drift

  - by ipartola

  I am seeing a very severe clock drift on my Xen HVM VPS, rented from a hosting provider, so I don't have access to the dom0 system. I continuously run ntpd, but the clock drifts by as much as 30 seconds in 5 minutes and NTP cannot keep up. Has anyone experienced this? Here are some details: $ dmesg | grep clock [ 0.160000] Measured 347 cycles TSC warp between CPUs, turning off TSC clock. [ 0.396000] * this clock source is slow. Consider trying other clock sources [ 0.550448] Switching to clocksource acpi_pm [ 0.653135] rtc_cmos 00:05: setting system clock to 2011-03-09 02:45:40 UTC (1299638740) $ cat /sys/devices/system/clocksource/clocksource0/available_clocksource acpi_pm $ cat /sys/devices/system/clocksource/clocksource0/current_clocksource acpi_pm

  Read the article

• Router 2wire, Slackware desktop in DMZ mode, iptables policy aginst ping, but still pingable

  - by skriatok

  I'm in DMZ mode, so I'm firewalling myself, stealthy all ok, but I get faulty test results from Shields Up that there are pings. Yesterday I couldn't make a connection to game servers work, because ping block was enabled (on the router). I disabled it, but this persists even due to my firewall. What is the connection between me and my router in DMZ mode (for my machine, there is bunch of others too behind router firewall)? When it allows router affecting if I'm pingable or not and if router has setting not blocking ping, rules in my iptables for this scenario do not work. Please ignore commented rules, I do uncomment them as I want. These two should do the job right? iptables -A INPUT -p icmp --icmp-type echo-request -j DROP echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all Here are my iptables: #!/bin/sh # Begin /bin/firewall-start # Insert connection-tracking modules (not needed if built into the kernel). #modprobe ip_tables #modprobe iptable_filter #modprobe ip_conntrack #modprobe ip_conntrack_ftp #modprobe ipt_state #modprobe ipt_LOG # allow local-only connections iptables -A INPUT -i lo -j ACCEPT # free output on any interface to any ip for any service # (equal to -P ACCEPT) iptables -A OUTPUT -j ACCEPT # permit answers on already established connections # and permit new connections related to established ones (eg active-ftp) iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT #Gamespy&NWN #iptables -A INPUT -p tcp -m tcp -m multiport --ports 5120:5129 -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 6667 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 28910 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29900 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29901 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29920 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p udp -m udp -m multiport --ports 5120:5129 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 6500 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 27900 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 27901 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 29910 -j ACCEPT # Log everything else: What's Windows' latest exploitable vulnerability? iptables -A INPUT -j LOG --log-prefix "FIREWALL:INPUT" # set a sane policy: everything not accepted > /dev/null iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP iptables -A INPUT -p icmp --icmp-type echo-request -j DROP # be verbose on dynamic ip-addresses (not needed in case of static IP) echo 2 > /proc/sys/net/ipv4/ip_dynaddr # disable ExplicitCongestionNotification - too many routers are still # ignorant echo 0 > /proc/sys/net/ipv4/tcp_ecn #ping death echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all # If you are frequently accessing ftp-servers or enjoy chatting you might # notice certain delays because some implementations of these daemons have # the feature of querying an identd on your box for your username for # logging. Although there's really no harm in this, having an identd # running is not recommended because some implementations are known to be # vulnerable. # To avoid these delays you could reject the requests with a 'tcp-reset': #iptables -A INPUT -p tcp --dport 113 -j REJECT --reject-with tcp-reset #iptables -A OUTPUT -p tcp --sport 113 -m state --state RELATED -j ACCEPT # To log and drop invalid packets, mostly harmless packets that came in # after netfilter's timeout, sometimes scans: #iptables -I INPUT 1 -p tcp -m state --state INVALID -j LOG --log-prefix \ "FIREWALL:INVALID" #iptables -I INPUT 2 -p tcp -m state --state INVALID -j DROP # End /bin/firewall-start Active ruleset: bash-4.1# iptables -L -n -v Chain INPUT (policy DROP 38 packets, 2228 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 844 542K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 38 2228 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 4 prefix `FIREWALL:INPUT' 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 38 2228 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 4 prefix `FIREWALL:INPUT' Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 1158 111K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Active ruleset: (after editing iptables into below sugested form) bash-4.1# iptables -L -n -v Chain INPUT (policy DROP 2567 packets, 172K bytes) pkts bytes target prot opt in out source destination 49 4157 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 412K 441M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2567 172K LOG all -- * * 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 4 prefix `FIREWALL:INPUT' 0 0 DROP icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 8 Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 312K packets, 25M bytes) pkts bytes target prot opt in out source destination ping and syslog simultaneous screenshots from phone (pinger) and from laptop (being pinged) http://dl.dropbox.com/u/4160051/slckwr/pingfrom%20mobile.jpg http://dl.dropbox.com/u/4160051/slckwr/tailsyslog.jpg

  Read the article

• Sfsync04 file is corrupted

  - by webdreamer

  I don't know exactly what I did, but somehow the sfsync04.sys (drivers) file is corrupt, and now I can't start my windows. That's the error startup repair gives me, and it is unable to correct it automatically. I'm currently running a live version of Ubuntu, so I can access my files, and everything seems to be alright except for the sfsync04.sys file. Is there a way I can repair that file so I can avoid reinstalling Windows for now? I'm running windows 7 64 bits. The file is in windows\system32\drivers\ . I think this happened when I tried to install some legacy software, but I'm not sure.

  Read the article

• Windows 7 Recurring Blue Screens: MEMORY_MANAGEMENT 0x1A

  - by Chris C.

  I have recurring BSODs that really have me scratching my head. Here's a look at the errors: MEMORY_MANAGEMENT 0x1A (ntoskrnl.exe) - I've seen this 9 times since April 2012 NTFS_FILE_SYSTEM 0x24 (Ntfs.sys) - this one's new, happend 4 days ago BAD_POOL_HEADER 0x19 (win32k.sys) - also new, happened 7 days ago My system specs: Intel Core i5 2500K @ 3.30GHz ASUS Sabertooth P67 Motherboard (Rev 2) * RMA'd my Rev 1 due to recall 16GB (4 x 4GB) Kingston HyperX 1600 MHz DDR3 RAM 2 x 640GB Western Digital Caviar Black 64MB SATA HDD EVGA NVIDIA GeForce GTS450 1GB PCI-E 2.0 Graphics Card I've got Windows 7 Home Premium and it's completely patched. I'm also running Microsoft Security Essentials, which is up-to-date and always present. I've run MemTest86+ from a USB drive for up to nine hours, giving my RAM a total of 6 passes, and it didn't detect a single error. I've used chkdsk in Windows 7 to scan the C:/ drive on boot (twice) and it found no problems. How can I find out what's causing all these blue screens?

  Read the article

• quick check of open port

  - by shantanuo

  The following is working as expected. (do not want to use nmap) I need to use nc (or any other built-in centOS) command in shell script to check the port 6379 of a remote server. I want the script to exit quickly if no response received in less than 1 second. But it seems that nc will wait for too long before quitting with exit code of 1 How do I "quickly" check if the port is listening? # time nc -z 1.2.3.4 1234 real 0m21.001s user 0m0.000s sys 0m0.000s # echo $? 1 # time nc -z 1.2.3.4 6379 Connection to 1.2.3.4 6379 port [tcp/*] succeeded! real 0m0.272s user 0m0.000s sys 0m0.008s # echo $? 0

  Read the article

• Why doesn't Ubuntu show my wireless device after updating the kernel?

  - by Jigar Shah

  After an kernel update Ubuntu doesn't show my wireless device. How can I fix this? I checked the syslogs and it says the following: 2010-02-16 19:25:39,913 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver 2010-02-16 19:25:39,940 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:25:46,066 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:25:46,086 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:25:46,162 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:05,451 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:05,480 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:05,506 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:12,496 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:19,870 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:23,398 WARNING: modinfo for module wl failed: ERROR: modinfo: could not find module wl 2010-02-16 19:35:23,399 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver 2010-02-16 19:35:23,432 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted

  Read the article

• Using unsigned drivers in Windows 8

  - by T. Fabre

  I just migrated from Windows 7 x64 to 8, but I can't get my VPN software to run anymore : the SafeNet IKE service (installed by SafeNet SoftRemoteLT GA, used by my VPN provider) cannot start anymore. I found that by default unsigned drivers are disabled on Win8, and that is what is blocking the driver. The System event log tells me that the driver (apparently, C:\WINDOWS\SysWow64\Drivers\IPSECDRV.sys ) was blocked when I try to manually start the service (SafeNet IKE Service). I get the same messages for another driver, crypto.sys found in the same folder. I tried using bcdedit to enable unsigned drivers : bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS bcdedit /set testsigning ON After reboot, same error. I tried by booting into Win 8's test mode, same issue. Applying the code signing policy (Enabled, Ignore) does not help either. Running gpresult does show that the policy is applied. Any help welcome.

  Read the article

• Windows Server 2003/Exchange 2007: How to setup public domain mail.foo.com to route to internal exch

  - by ryan.keeter

  Good day, I have an internal Exchange Server 2007 and a Windows Server 2003 domain. At this point in time I have an external DNS setup (DynDNS 29.95 service) to resolve foo.com to my singular public IP address then it gets routed to external facing site. I would like to know how to setup POP on mail.foo.com and SMTP on smtp.foo.com, and more importantly, what needs to be setup in Exchange server to allow for this to happen. My end state is to send email through smtp.foo.com and receive mail on mail.foo.com. As of now, when I create a user within Exchange the default email address is [email protected], and I would like it to be [email protected]. Thank you and I appreciate the help as I am a .NET developer trying to do sys admin work, and it is MUCH harder than I have ever imagined, my hat is off to all sys admins and IT pros.

  Read the article

• modprobe not found at all

  - by timmeyh

  I know that a lot of people had problems finding modprobe which was mostely due to an unconfigured $PATH. This time however I logged into a machine (Linux mymachine 2.6.32-6-pve #1 SMP Mon Jan 23 08:27:52 CET 2012 i686 GNU/Linux with root rights) and modprobe wasn't found at all. This are the steps I have taken so far: - which modprobe => no results - locate modprobe => no results - my $PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11: - find / -name "modprobe*" => /proc/sys/kernel/modprobe - cat /proc/sys/kernel/modprobe => /sbin/modprobe - /sbin/modprobe => no such file or directory Ass you can see no modprobe at all. Does anyone else has a suggestion/ sollution so I can use modprobe?

  Read the article

• How to solve ATI Radeon 7670M/ Intel HD Switchable Graphics recurring BSOD error?

  - by Ashin Mandal

  I recently bought a VAIO E Series laptop with an ATI Radeon 7670M and Intel HD Switchable Graphics. Around about one month ago, my computer started shutting down with atikmpag.sys blue screen error and the frequency of the errors kept on increasing with time. I am really worried about my VGA Adapter and whether or not it's gone bad. It's a 3 month old laptop! I searched on Google about atikmpag.sys BSOD and most of them suggested that my driver probably needs to be updated. I searched the Sony website and also the ATI website, I did have the latest drivers installed. Yet, I uninstalled the driver and installed it back again. But blue screens just keep coming back again and again. It generally happens more frequently when I have a video running and have paused it to do something else. I hope it's a driver issue!

  Read the article

• Best network tuning variables for a Linux proxy

  - by smarthall

  What are the best settings to tune so that Linux can handle a very large amount of TCP connections such as would be seen by a proxy server or a webserver? I'm using Centos6 and squid and am seeing a large amount of TIME_WAIT connections backing up until finally the machine stops responding. The machine isn't loaded at the time, and is having trouble making ingoing and outgoing connections. I've had several suggestions of tuning /proc/sys/net/ipv4/tcp_tw_reuse and /proc/sys/net/ipv4/tcp_tw_reuse but they mention bad interactions with load balancers and NAT both of which are used in my situation.

  Read the article

• Installing ethernet controller driver after clean windows XP install

  - by user1488804

  I've been having trouble getting internet access through an ethernet connection since doing a fresh install of windows XP. It appears that I'm missing the driver for the ethernet controller. Looking in 'device manager' under the network adapters section there's an apparently working '1394 Net Adaptor' but under unknown devices there's the question-marked ethernet controller, which I believe is what I want the driver for. I found an old cd that contains the driver for it (Realtek 8139 or some 81xx). There's no setup tool, but only 3 files (a .cat file, .inf file and .sys file). I've tried right-clicking on the .inf file and using 'install' and also tried just copying the .sys file into the system32/drivers folder but neither have got me anywhere after restarting. The ethernet controller is still listed in 'unknown devices'. EDIT: I've also tried updating the driver in the device manager, pointing it at the folder containing the driver, but this hasn't worked either. Any ideas? Thanks

  Read the article

• DIsable my nv video card driver in linux

  - by Dahaka Wang

  I'm trying to passthrough my nv video card to my domU, but I could not bind my video card to the pciback driver I only have one video card with the pci number 0000:03:00.0, so I used the following command echo -n "0000:03:00.0" > /sys/bus/pci/drivers/nouveau/bind to unbind the nouveau driver from my video card. The screen went black because I have forcefully removed the video driver, therefore I ssh'd into the computer to run further commands I ran: echo -n "0000:03:00.0" > /sys/bus/pci/drivers/pciback/bind to try to bind it to my pciback driver, but I got: bash: echo: write error: No such device I found out that this was the message shown when trying to bind a PCI device which is already bound. Therefore, I think that something was still using my video card Can anyone help me out? Thanks a lot!

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >