Search Results

Search found 17686 results on 708 pages for 'high level'.

Page 33/708 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• Brand new Seagate HDD has high raw read error rate

  - by kpax

  I've just purchased a brand new Seagate ST31000524AS 1TB HDD. Manufacture date shows as January 2012 (yes that's as new as new can get), so must be one of the new batches from the post-flood Thailand. Anyway, I downloaded a copy of Active Hard Disk Monitor tool to check the S.M.A.R.T. parameters and I find the parameter Raw Read Error Rate is very low. Should I be worried? Will this rectify over time? This hdd is just 7 hours old; what gives? Edit: I meant high raw read error rate - Title updated accordingly

  Read the article

• Feedback on available mid-to-enterprise level desktop backup solutions [closed]

  - by user85610

  I am involved in the creation of a new backup solution to replace our current Retrospect setup, which has become a significant time sink to administer. We have almost 200 desktop and some laptop clients, both Windows and OS X. We're only interested in products oriented around disk-to-disk, and would be integrate well with our current set of nine NAS devices as target storage. I'd just like some feedback from anyone out there, as it's sometimes difficult otherwise to find objective reviews of software at this level. Both data and time are important enough that we need a reliable solution which won't be prone to self-destruction as often as Retrospect. Bonus points for de-duplication, which might help squeeze more service time out of our NAS setup in terms of capacity. Currently considering Commvault and Netbackup. Many other products I've seen don't have an OSX client. Any thoughts?

  Read the article

• Keyboard Slow on a high power machine.

  - by Tim Pierson

  I am having a terrible time with my high powered machine. The keyboard is not displaying the keys as quickly as I type. Sometimes I have to wait up to a minute for the key to display. When I type ahead it sometimes loses characters. I am not sure where to start looking for this problem. It started about a month ago and I still have not figured out why. It does not always do it. But acts up about 2-3 minutes out of ever hour of use or thereabout. How can I look to isolate and find the problem, and solve it?

  Read the article

• The cache is getting at full level so fast

  - by CompilingCyborg

  Please, the memory and the cache are getting to the full level quite quickly under my linux mint 9 - isadora system. I used Ubuntu and Debian before, and it was not causing this issue at all. At the current time i typing the following command frequently to empty the cache "echo 3 /proc/sys/vm/drop_caches". Please any way around this? or do you know what's going wrong? | I am only programming on this machine; no graphics, no games nothing. Thanks in advance for your help!

  Read the article

• Sound card issues (High Definition Audio Controller)

  - by Prakash R

  I have a 5-year-old Acer Aspire 4520. Until a month back it was working beautifully on Windows 7 32bit. But then out of the blue, the sound stopped working. I've tried reinstalling the OS 3-4 times. The sound came back a couple of times, but it stopped working after a reboot. Even after installing the sound drivers, I don't see any entry in the Playback tab of the Sound applet in Control Panel. I see a High Definition Audio Controller entry in Device Manager. I disabled and uninstalled it, but Windows reinstalls it automatically. I'll share specific hardware details if anybody here needs to know. The processor is "AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55". Any help would be appreciated.

  Read the article

• How computers display raw, low-level text and graphics

  - by panic

  My ever-growing interest in computers is making me ask deeper questions, that we don't seem to have to ask anymore. Our computers, at boot, as far as I understand it, are in text mode, in which a character can be displayed using the software interrupt 0x10 when AH=0x0e. We've all seen the famous booting font that always looks the same, regardless of what computer is booting. So, how on earth do computers output graphics at the lowest level, say, below the OS? And also, surely graphics aren't outputted a pixel at a time using software interrupts, as that sounds very slow? Is there a standard that defines basic outputting of vertices, polygons, fonts, etc. (below OpenGL for example, which OpenGL might use)? What makes me ask is why OS' can often be fine without official drivers installed; how do they do that? Apologies if my assumptions are incorrect. I would be very grateful for elaboration on these topics!

  Read the article

• Make Google Chrome "Application" Windows Use High-Quality Icons in Windows 7

  - by The How-To Geek

  Whenever I use Google Chrome's "Create Application" shortcut (which I heavily use, and recommend), the icons shown on the Windows 7 taskbar are really blurry, probably the result of the 16x16 favicon being stretched out. I'd like to be able to replace these with another, high-quality icon, but even when I replace the cached file, it doesn't update for some reason. For reference, here's the path to the icon, for Gmail, at least. I'm also using the latest Dev channel version of Chrome. %USERPROFILE%\AppData\Local\Google\Chrome\USERDA~1\Default\PLUGIN~1\GOOGLE~1\mail.google.com\https_443\icons#desktop\

  Read the article

• Setting up a DNS server for a 3rd level domain

  - by user45339

  If I would like a client to use HIS DNS for a 3rd level domain name (ie test.domain.com), how would I be able to do that? So I have domain servers ns1.domain.com + ns2.domain.com for domain.com but now I want ns1.rabbit.com and ns2.rabbit.com for test.domain.com. How can this be done? I know it's possible because I saw it at some providers. Then, as a second part (and related) part; how to set up a WHOIS for that test.domain.com? So that, if you query my server for the information about test.domain.com, it'll be different than the info on domain.com? Thanks

  Read the article

• High frequency, kernel bypass vs tuning kernels?

  - by Keith

  I often hear tales about High Frequency shops using network cards which do kernel bypass. However, I also often hear about them using operating systems where they "tune" the kernel. If they are bypassing the kernel, do they need to tune the kernel? Is it a case of they do both because whilst the network packets will bypass the kernel due to the card, there is still all the other stuff going on which tuning the kernel would help? So in other words, they use both approaches, one is just to speed up network activity and the other makes the OS generally more responsive/faster? I ask because a friend of mine who works within this industry once said they don't really bother with kernel tuning anymore-because they use kernel bypass network cards? This didn't make too much sense as I thought you would always want a faster kernel for all the CPU-offloaded calculations.

  Read the article

• When to use MySQL replication or DRBD for HA on Xen VM?

  - by user62513

  I'm setting up a database which needs to be needs to provide High Availabilty. My primary concern is high performance and robustness (I don't want something that will fail fast and badly). The database is accessed by the application at an average of 300 qps. It's will run on Xen VMs and it has some InnoDB tables as well as MyISAM tables. The VMs are connected via ethernet 100Mbit/s ethernet cables. Which of the two - MySQL replication or DRBD - would you recommend in such a situation? Or should I use DRBD to make the master database Highly Available and use MySQL replication on the slaves? I'm a developer so these things are all not so easy for me to make a sound judgement.

  Read the article

• High CPU Steal percentage on Amazon EC2 Instance

  - by Aditya Patawari

  I am experiencing high CPU steal percentage in a Amazon EC2 large instance. I know it means that my virtual CPU is waiting on the real CPU of the machine for time. My question is that what can I do to reduce this percentage and get maximum out of the CPU? Steal percentage is consistently at 20%. System load crosses 10 when this happens. I have checked memory and network and I am sure that they are not the bottleneck. Is that normal for such environment? Also are there any system level optimization techniques for reducing steal percentage form the virtual instance? avg-cpu: %user %nice %system %iowait %steal %idle 52.38 0.00 8.23 0.00 21.21 18.18

  Read the article

• Load on Ubuntu 8.04 LTS high

  - by Paddington

  My Ubuntu 8.04 LTS server periodically has a high load avg spike(once every 2 days) resulting in Apache timing out and virtualy everything even SSH to the server is not possible. When I am on the console and run TOP is see that The load avg increases from less than 1 to above 60 in 15 mins. How can I isolate the cause? top - 09:21:51 up 37 days, 20:18, 6 users, load average: 5.41, 5.53, 5.36 Tasks: 160 total, 2 running, 156 sleeping, 0 stopped, 2 zombie Cpu(s): 65.0%us, 8.8%sy, 0.0%ni, 1.0%id,24.6%wa, 0.3%hi, 0.3%si, 0.0%st Mem: 3989468k total, 3444984k used, 544484k free, 360460k buffers Swap: 11687248k total, 178168k used, 11509080k free, 881772k cached

  Read the article

• How do I know if I need a level 3 switch?

  - by eekmeter

  We currently have a flat network with a bunch of unmanaged switches. I would like to use VLANs to segregate certain users like guests and I would like to use 802.1x. However, I'm not sure if what I need is a level 3 or a level 2 switch. From what I understand a level 3 switch does routing between VLANs. I don't think I need this at the moment but as I said I'm not sure since this is all new to me. What else would a level 3 switch do for me? Our network is relatively small, less than a 100 users. What exactly does a level 3 switch do that I can't get with a level 2 switch? When would I need a level 3?

  Read the article

• Load Balancing and High Availability for Web Site

  - by nzgirl

  We've developing a database driven (70%/30% read/write load) website using C#.NET, IIS and MS SQL Server 2008 to be hosted on Windows 2008. Due to contractual reasons our setup has to be hosted on our own physical/virtual servers instead of a cloud solution at this stage. Could someone outline or link to some best practices that would provide both high availability (priority at the moment) and eventually load balancing for our site. We're probably looking at some sort of 2 SQL server mirrored system and 2 ISS web servers to start with. Thanks in advance.

  Read the article

• High system cpu load (%sys), system locks

  - by Mark

  For the last two weeks we are having intermittent severe spikes in system cpu usage (shown as %sys), which last for maybe half a minute, locking most processes, including ssh. I've been trying to figure this out, but atop doesn't show anything relevant (system usage for processes it shows is insignificant), spikes are intermittent and I could not reproduce the spike using any workload for the web application this webserver hosts. If you have any ideas on how to debug high %sys and (sometimes) %si CPU usage, please share them. System specs (don't know if any of this is relevant): Dedicated server, CentOS 6, core i7 950, consistent 4 to 8 GB RAM free at any time, hard drives are in RAID-1. Additional info: dmesg output doesn't change between spikes /var/log/messages doesn't change between spikes Here is cat /proc/vmstat Here is output of mpstat 1 during a typical spike Add 07.11.11: looks like simple reboot restored system state, and we might never know what caused the disturbance in first place.

  Read the article

• HIGH CPU USAGE FROM SUSTEM [on hold]

  - by user195641

  CAN ANYONE EXPLAIN THIS ? IT IS BAD FOR MY CPU ? CAN ANYONE HELP ME ? I DONT KNOW WHAT TO DO ! THERE IS HIGH DELAY WHEN I OPEN A NEW TASK HOWEVER ITS A INTEL CORE DUO EXTREAMA 3.0GH THANKS There are about 100 items monitored with the agent. They are also monitored on other identical hosts where Zabbix agent does not consume so much of CPU. Agents send collected data to Zabbix proxy. The agent configuration is default. The host CPU has 8 cores (2.4 Gz). The smallest time value for monitored items is 60 seconds.

  Read the article

• Why can't I connect to a Cisco wireless access point?

  - by spinlock

  I'm running a Lucid Netbook Remix on my Dell Inspiron 600m and I was not able to connect to the wireless network at the Hacker Dojo in Mountain View yesterday. There were plenty of other people on the network - MS, Mac, and Linux boxes - but my laptop would never get an ip address. I can connect to my home network, which is open, and I've never had a problem connecting at the coffee shop, which uses WPA. The Hacker Dojo is running WPA and we checked the password a number of times but got no love. Any ideas would be greatly appreciated. Additional Info: $iwlist eth1 scan eth1 Scan completed : Cell 01 - Address: EC:C8:82:FA:63:92 ESSID:"HackerDojo-gwifi" Protocol:IEEE 802.11g Mode:Master Frequency:2.412 GHz (Channel 1) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:62 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 280ms ago Cell 02 - Address: 00:18:4D:24:08:61 ESSID:"Green Zone" Protocol:IEEE 802.11bg Mode:Master Frequency:2.417 GHz (Channel 2) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:23 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 11516ms ago Cell 03 - Address: 08:17:35:32:6E:13 ESSID:"\x00" Protocol:IEEE 802.11g Mode:Master Frequency:2.437 GHz (Channel 6) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:71 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 2760ms ago Cell 04 - Address: EC:C8:82:FA:63:90 ESSID:"HackerDojo" Protocol:IEEE 802.11g Mode:Master Frequency:2.412 GHz (Channel 1) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:61 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 772ms ago Cell 05 - Address: 08:17:35:32:6E:11 ESSID:"HackerDojo-Presenter" Protocol:IEEE 802.11g Mode:Master Frequency:2.437 GHz (Channel 6) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:65 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 3308ms ago Cell 06 - Address: 08:17:35:32:7E:31 ESSID:"HackerDojo-Presenter" Protocol:IEEE 802.11g Mode:Master Frequency:2.462 GHz (Channel 11) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:88 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 1668ms ago Cell 07 - Address: 38:E7:D8:01:46:1E ESSID:"JWS_Incredible" Protocol:IEEE 802.11bg Mode:Master Frequency:2.412 GHz (Channel 1) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 500 kb/s; 54 Mb/s Quality:31 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Extra: Last beacon: 2848ms ago Cell 08 - Address: 08:17:35:32:6E:10 ESSID:"HackerDojo" Protocol:IEEE 802.11g Mode:Master Frequency:2.437 GHz (Channel 6) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:67 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 7848ms ago Cell 09 - Address: 08:17:35:32:7E:30 ESSID:"HackerDojo" Protocol:IEEE 802.11g Mode:Master Frequency:2.462 GHz (Channel 11) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:85 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 8300ms ago Cell 10 - Address: 08:17:35:32:6E:12 ESSID:"HackerDojo-gwifi" Protocol:IEEE 802.11g Mode:Master Frequency:2.437 GHz (Channel 6) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:68 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 232ms ago Cell 11 - Address: 08:17:35:32:7E:32 ESSID:"HackerDojo-gwifi" Protocol:IEEE 802.11g Mode:Master Frequency:2.462 GHz (Channel 11) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:86 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 168ms ago Cell 12 - Address: EC:C8:82:FA:63:91 ESSID:"HackerDojo-Presenter" Protocol:IEEE 802.11g Mode:Master Frequency:2.412 GHz (Channel 1) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:62 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 7408ms ago $iwconfig eth1 eth1 unassociated ESSID:"HackerDojo-gwifi" Nickname:"ipw2100" Mode:Managed Channel=0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:16 dBm Retry short limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0

  Read the article

• Setting zoom level on mobile browser

  - by Zbyszek Swirski

  I am designing website for mobile access and I want to set page width, height and button sizes, so they display filling up the screen. For example if user is using HTC HD , the whole screen would be 480x800 with button sized 240x200. However IE mobile as well as Opera load the page with some zoom level, so the buttons display either too large or too small. How can I either read current zoom level in javascript or set it from javascript?

  Read the article

• Static source code analysis for C# that operates on source code level

  - by Sardaukar

  Current static source analysis tools for C# (or other .NET languages) usually operate on the assembly-level. They use reflection to analyse the code. Are there tools available that operate on a source code level only (like lint for C)?

  Read the article

• How to programmatically detect Cipher type and Encryption level from a wireless network device from

  - by amexn

  Now my team working in a network project using windows application c#. I didn't know how to programmatically detect Cipher type and Encryption level from a wireless network device from windows 2003 server. After searching i got WMI (Windows Management Instrumentation) for solving the problem.+ Please suggest example/reference for finding Cipher type and Encryption level from a wireless network device from windows 2003 server

  Read the article

• SQL Server high CPU and I/O activity database tuning

  - by zapping

  Our application tends to be running very slow recently. On debugging and tracing found out that the process is showing high cpu cycles and SQL Server shows high I/O activity. Can you please guide as to how it can be optimised? The application is now about an year old and the database file sizes are not very big or anything. The database is set to auto shrink. Its running on win2003, SQL Server 2005 and the application is a web application coded in c# i.e vs2005

  Read the article

• Setting log level of message at runtime in slf4j

  - by scompt.com

  When using log4j, the Logger.log(Priority p, Object message) method is available and can be used to log a message at a log level determined at runtime. We're using this fact and this tip to redirect stderr to a logger at a specific log level. slf4j doesn't have a generic log() method that I can find. Does that mean there's no way to implement the above?

  Read the article

• ASP.NET Membership for high security scenarios?

  - by Joachim Kerschbaumer

  Hi there, Is the asp.net membership system used over wcf (transport security turned on) enough for high security internet scenarios with thousands of clients spread all over the internet? I'm just evaluating possible solutions and wanted to know if this might fit in this category. If not, what would be the best method to provide high security access over wcf for internet scenarios?

  Read the article

• How to set the transaction isolation level of a

  - by Michael Wiles

  How do I set the global transaction isolation level for a postgres data source. I'm running on jboss and I'm using hibernate to connect. I know that I can set the isolation level from hibernate, does this work for Postgres? This would be by setting the hibernate.connection.isolation hibernate property to 1,2,4,8 - the various values of the relevant static fields. I'm using the org.postgresql.xa.PGXADataSource

  Read the article

• High-level languages for out-of-the-box GUI desktop application programming

  - by Omeoe

  After I discontinued programming in C++ while entering into web authoring I was spoilt by PHP's high level constructs like hash tables or its dynamic, weak typing. I remembered the angst of C/C++ pointers and the maze of low-level Win32 API handles and message loops and that prevented me from utilizing environments like Code::Blocks for desktop applications. I am also not very fond of bulky, statically-typed C#/.NET environment. Any other ideas?

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >