Search Results

Search found 913 results on 37 pages for 'rebooting'.

Page 33/37 | < Previous Page | 29 30 31 32 33 34 35 36 37  | Next Page >

• Checking for corrupt war file after mvn install

  - by Tauren

  Is there a maven command that will verify that a WAR file is valid and not corrupt? Or is there some other program or technique to validate zip files? I'm on Ubuntu 9.10, so a linux solution is preferred. On occasion, I end up with a corrupt WAR file after doing mvn clean and mvn install on my project. If I extract the WAR file to my hard drive, an error occurs and the file doesn't get extracted. I believe this happens when my system is in a low-memory condition, because this tends to happen only when lots of memory is in use. After rebooting, doing a mvn install always gives a valid WAR file. Because this happens infrequently, I don't typically test the file by uncompressing it. I transfer the 50MB war file to my server and then restart Jetty with it as the root webapp. But when the file is corrupt, I get a java.util.zip.ZipException: invalid block type error. So I'm looking for a quick way to validate the file as soon as mvn install is completed. Is there a maven command to do this? Any other ideas?

  Read the article

• C# - Alternative to System.Time.Timer, to call a function at a specific time.

  - by Fábio Antunes

  Hello everybody. I want to call a specific function on my C# application at a specific time. At first i thought about using a Timer (System.Time.Timer), but that soon became impossible to use. Why? Simple. The Timer Class requires a Interval in milliseconds, but considering that i might want the function to be executed, lets says in a week that would mean: 7 Days = 168 hours; 168 Hours = 10,080 minutes; 10,080 Minutes = 6,048,000 seconds; 6,048,000 Seconds = 6,048,000,000 milliseconds; So the Interval would be 6,048,000,000; Now lets remember that the Interval accepted data type is int, and as we know int range goes from -2,147,483,648 to 2,147,483,647. That makes Timer useless in this case once we cannot set a Interval bigger that 2,147,483,647 milliseconds. So i need a solution where i could specify when the function should be called. Something like this: solution.ExecuteAt = "30-04-2010 15:10:00"; solution.Function = "functionName"; solution.Start(); So when the System Time would reach "30-04-2010 15:10:00" the function would be executed in the application. How can this problem be solved? Thanks just by taking the time to read my question. But if you could provide me with some help i would be most grateful. Additional Info: What these functions will do? Getting climate information and based on that info: Starting / Shutting down other Applications (most of them Console Based); Sending custom Commands to those Console Applications; Power down, Rebooting, Sleep, Hibernate the computer; And if possible schedule the BIOS to Power Up the Computer;

  Read the article

• Eclipse does not refresh project files in package explorer view

  - by EugeneP

  Today I see a strange behaviour of Eclipse 3.5.2 for the first time in 3 months. First, when I run a main function, it runs a previously compiled version. Let's say I press Ctrl+F11 in the window with an open java class and existing main function. Usually it rebuilds the class and runs a new version. Today even if there was a compile mistake, it would run fine. So I guess it does not recompile the class. Next, more strangely, if I intentionally make a mistake in the code and Eclipse underlines those lines in red, still the project Explorer does not mark them as containing errors. They remain of grey color if there were not any errors. First I did not know how to solve this problem. I tried to reopen the project, restart Eclipse and finally reboot the OS. After the tenth attempt, after rebooting, Eclipse said that all project's files are "OUT OF SYNC with the file system". When I pressed "Refresh" - F5 on a project's header name in Project Explorer it finally marked all the files with errors as containing errors and running the main function gave the desired result. An hour of my work passed and this happened again , with the other project. All the same. No marking of files as red, running no matter what old version of class with no compile errors. And since Eclipse does not tell that files are out of sync, simply pressing F5 on a project cannot help. What can you suggest?

  Read the article

• Reinstalling assemblies for new user after reboot, why?

  - by Marko Benko

  Hi - I have Installshield InstallScript MSI aka "Full" setup and Installshield Basic MSI aka "Patch" setup. Full setup copies some files to GAC, some to folder, etc. Patch setup replaces some files in GAC and some in installation folder. How ingenious, isn't it? :) Also, patch setup is designed that none of its actions are visible after installation. I'm changing some properties in sequences for that(damn, can't remember which ones, will look it up). When patch is applied, application works well(administrator user), but when rebooting a computer and logging in as a different (just domain, not admin) user, application doesn't work. In trace I have found an error line stating that installation of one of the components(to be precise, component which puts files to GAC) failed. Says that there is no installation source for it... Why is this so? Setup is set to install for everyone, patch is just replacing some files, why does it need to "install" something when a new user logs in? Thanks, Marko

  Read the article

• Simplest way to debug an android bluetooth application

  - by intiha

  I am trying to test and build a sample android application that can simply connect to a BT server to send and receive a few packets. Since the emulator has no support what is the next best thing to test BT communication? Can I just run a code that acts as a server on my laptop and dumps BT connection onto a console? Do I have to write this code, or is their a simple tool that saves me that hassle? One more thing, I have windows 7, and currently I attach to my PC an anycom USB BT adapter. This is able to show up my nexus one as a BT device. I can pair to my laptop but connection always fails. When it tries to pair I have tried both 0000 and 1234 as suggested on my nexus, but in my connection list it still lists my laptop as paired but not connected. Any idea why? I searched for this problem and apparently people talk about rebooting and power cycling BT, but these solutions dont work for me. Thanks. Affan.

  Read the article

• Destroy process-less console windows left by Visual Studio debug sessions

  - by jon hanson

  A known bug with security update KB978037 can occur with Visual Studio 2003 (and 2008) where sometimes if you restart a debugging session on a console app then the console window doesn't get closed even though the owner process no longer exists. The problem is discussed further here: http://stackoverflow.com/questions/2402875/visual-studio-debug-console-sometimes-stays-open-and-is-impossible-to-close These zombie windows then can not be closed via the Taskbar or via the TaskManager, and typically require a power off/on to get rid of them. Over the period of even a single day you can accumulate quite a few of them, which clog up your TaskBar and are generally annoying. I thought I would knock up a simple C++ Win32 utility to attempt to call DestroyWindow() on these windows by passing the windows handle as a cmd-line argument and converting it to a HWND. I'm converting the handle from a string by parsing it as a DWORD then casting the DWORD to a HWND. This appears to be working as if I call GetWindowInfo() on the handle it succeeds. However calling DestroyWindow() on the handle fails with error 5 (access denied), presumably because the caller process (i.e. my app) doesn't own the window in question. Any ideas as to how I might get rid of the zombie windows, either via the above approach or any other alternative short of rebooting? I'm in a corporate environment so installing/uninstalling updates/service-packs etc isn't an option.

  Read the article

• How can this code throw a NullReferenceException?

  - by Davy8

  I must be going out of my mind, because my unit tests are failing because the following code is throwing a null ref exception: int pid = 0; if (parentCategory != null) { Console.WriteLine(parentCategory.Id); pid = parentCategory.Id; } The line that's throwing it is: pid = parentCategory.Id; The console.writeline is just to debug in the NUnit GUI, but that outputs a valid int. Edit: It's single-threaded so it can't be assigned to null from some other thread, and the fact the the Console.WriteLine successfully prints out the value shows that it shouldn't throw. Edit: Relevant snippets of the Category class: public class Category { private readonly int id; public Category(Category parent, int id) { Parent = parent; parent.PerformIfNotNull(() => parent.subcategories.AddIfNew(this)); Name = string.Empty; this.id = id; } public int Id { get { return id; } } } Well if anyone wants to look at the full code, it's on Google Code at http://code.google.com/p/chefbook/source/checkout I think I'm going to try rebooting the computer... I've seen pretty weird things fixed by a reboot. Will update after reboot. Update: Mystery solved. Looks like NUnit shows the error line as the last successfully executed statement... Copy/pasted test into new console app and ran in VS showed that it was the line after the if statement block (not shown) that contained a null ref. Thanks for all the ideas everyone. +1 to everyone that answered.

  Read the article

• Force windows video driver reload. Is it possible at all?

  - by somemorebytes

  Hi there, Some drivers use parameters written in the registry to configure themselves when they get loaded at boot time. I can modify those values and then reboot, but I would like to know if it is possible to force the driver reload, making the changes effective without rebooting. Specifically, I am talking about the video driver (nvidia). I read somewhere, that calling through pINvoke() [User32.ll]::ChangeDisplaySettings() with a 640x480x8bits resolution,(which is so low that it should not be supported by a modern driver) will force windows to load the "Standard VGA driver", and making another call with the current resolution will load the nvidia driver again. This does not work though. At least in Windows 7, even if the low res is not displayed as "supported" the system reduces the screen to a little square in the center of the screen, showing the low res wihtout unloading the nvidia driver. So, is there any .NET/Win32 API, service to restart, or any way at all to force a video driver reload? Perhaps programatically disabling the device (as you could do from the Device Manager) and reenabling it again? Any idea? Thanks a lot.

  Read the article

• Cannot connect Nexus One Phone to Android adb

  - by appbee

  I am running Android SDK 2.2 and am trying to get the adb to connect to the Google Nexus One phone. Its a new phone, shipped straight from Google - haven't installed any apps on it yet. (I have Windows XP) Here is what I have done so far: Followed the instructions on setting up the device for development as given on the Android Developer's site: http://developer.android.com/guide/developing/device.html added android:debuggable="true" to my application manifest USB debuggable is checked on the phone downloaded the Device Drivers For Windows Revision 3 (this supports Nexus One phones) Went through the Hardware Installation wizard to install the device - the device shows up as "Android Composite ADB Interface". When I run adb devices on the shell, the device appears for a moment, then disappears. On the Eclipse console, I get the following message: [2010-11-13 11:54:42 - DeviceMonitor]Failed to start monitoring I have rebooted the pc several times, uninstalled and reinstalled the drivers several times, but I get the same error each time. As I was researching this problem, someone had recommended rebooting the phone. I am a bit confused by that - is that a soft or hard reboot? Do I just power the phone off/on and is there something more complex involved? Do I have to hard reboot it to reset to factory version - even though its brand new? Has anyone run into a similar problem? Any help on this would be great. I can't test my application on the device if the adb cannot view the device. Thanks so much in advance.

  Read the article

• php error reporting - having trouble matching local & web server settings

  - by Andrew Heath

  I'm trying to add a custom error handler to my site, but in doing so have discovered that my webhost's PHP error reporting settings and those of my localhost (default XAMPP) vary considerably. While I thought I was programming to E_STRICT like a good little boy, adding the error handler to my webhost revealed craploads of Runtime Notices. Example: Runtime notice strtotime() [function.strtotime]: It is not safe to rely on the system's timezone settings. Please use the date.timezone setting, the TZ environment variable or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Chicago' for 'CST/-6.0/no DST' instead In /home/... Clearly this isn't a red-alert, showstopping error. But what bothers me is that it doesn't show up on my localhost. I'd certainly like to improve my code by addressing these sorts of issues if I could see them! I've looked through both php.ini files, and my webhost's setting is error_reporting = E_ALL & ~E_NOTICE whereas mine was error_reporting = E_STRICT, which I had thought was better. However, changing mine to match and rebooting the server doesn't seem to have accomplished anything. Could someone please point me in the right direction?

  Read the article

• Performance issue between builds

  - by DeadMG

  I've been developing a small indie game in my spare time and have run across an inexplicable issue. Some builds of the game will randomly run several hundred frames per second slower than other builds. For example, when rendering some text and no 3D scene, I can achieve 1800FPS on my own hardware. Add one 3D sphere (10k verts, pixel shaded), achieve 1700 FPS. Add two more spheres, achieve 800 FPS. Remove all spheres, achieve 1100FPS- even though the code now renders the same scene as I previously achieved at 1800FPS, which is just the FPS counter being rendered. I've tried rebuilding and cleaning the project and rebooting the compiler. This is in Release mode and I turned on all the optimizations I could find. Any suggestions as to the cause? I ran a quick profile, and Visual Studio seems to think that over 90% of my time was spent in D3D9_43.dll, suggesting that it's not a bug in my app, which doesn't explain why it manifests in only some builds. I rebooted my machine and it's back up to 1800FPS. I think it's a bug in the DirectX SDK tools (amongst many others). Going to delete this question.

  Read the article

• Exchange 2010 setup /prepareAD fails to run

  - by MadBoy

  I've tried installing Exchange 2010 on Windows Server 2008 R2 (only domain controller and all-in-one system). I did setup.exe /prepareAD, setup /prepareSchema and it worked fine the first time I did it. Unfortunately due to problem with Hub Transport installation related to (at least from what I've read) IPv6 being disabled (some say disabling it helped them while some enabling helped them). I did it the proper way by using registry entry to disable IPv6 but it still errored out. So i managed to uninstall everything (renamed some old entries in registry of failed Hub Transport roles and tried to reinstal Exchange after rebooting server. Unfortunetly running setup /prepareAD now gives an error: D:setup /PrepareAd Welcome to Microsoft Exchange Server 2010 Unattended Setup By continuing the installation process, you agree to the license terms of Microsoft Exchange Server 2010. If you don't accept these license terms, please cancel the installation. To review these license terms, please go to http://go.microsoft.com/fwlink/?LinkId=150127&clcid=0x409/ Press any key to cancel setup................ No key presses were detected. Setup will continue. Preparing Exchange Setup Copying Setup Files ......................... COMPLETED No server roles will be installed Performing Microsoft Exchange Server Prerequisite Check Organization Checks ......................... COMPLETED Setup is going to prepare the organization for Exchange 2010 by using 'Setup /P repareAD'. No Exchange 2007 server roles have been detected in this topology. Af ter this operation, you will not be able to install any Exchange 2007 server rol es. Configuring Microsoft Exchange Server Organization Preparation ......................... FAILED The following error was generated when "$error.Clear(); buildToBuildUpgrade -ExsetDataAtom -AtomName OrgLevelCt -DomainController $RoleDomainController" was run: "An error occurred with error code '2147504140' and message 'The data type can't be converted to or from a native Active Directory data type.'.". The Exchange Server setup operation did not complete. Visit http://support.micro soft.com and enter the Error ID to find more information. Exchange Server setup encountered an error. Unfortunetly if i rerun the setup it complains that it needs setup /prepareAD to be run first. Basically all that works now is setup /PrepareSchema and setup /PrepareDomain complains that prepareAD wasn't done. For full information I'm also attaching error I had before I've uninstalled everything and tried again: Hub Transport Role Failed Error: The following error was generated when "$error.Clear(); install-ExsetdataAtom -AtomName SharedMachineSettings -DomainController $RoleDomainController" was run: "An error occurred with error code '2147950640' and message 'There is no such object on the server.'.". An error occurred with error code '2147950640' and message 'There is no such object on the server.'.

  Read the article

• SQL 2000: Intermittent Error 7399 with OLE DB Provider for Microsoft Jet

  - by Tim Lara

  I am using SQL Server 2000 on Windows Server 2003 SP2 and have set up a linked server to point at an Access 97 database using the OLE DB Provider 4.0 for Microsoft Jet. The problem I am having sounds almost exactly like the one described in this Microsoft KB article, except that the error I am getting is intermittent: http://support.microsoft.com/kb/814398 The SQL Server is running under the Local System account (which I don't have authority to change), and the Access 97 .mdb file that the linked server points to is on a Win XP Pro machine on the same LAN as the SQL Server machine, inside of a shared folder with permissions set to "Everyone" and "Full Control". Now, if the linked server connection never worked, it would make more sense that the problem is merely a permissions issue with the Local System account as the KB article above suggests, but the maddening thing is that sometimes the connection works just fine. When it fails, the error message is always the same: Error 7399: OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. [OLE/DB provider returned message: Unspecified error] OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: ]. Also, not only does the linked server setup occasionally work just fine on this one particular SQL Server, what is supposed to be exactly the same setup on 25 other servers works just fine EVERY TIME! Obviously, something in the non-working setup must not be exactly the same, but I'm having trouble figuring out where to look for the differences since the error message SQL Server returns is so vague. I know our sysadmins have had numerous issues with Active Directory replication across our domain, so my best guess is that there is some sort of odd group policy corruption going on, but I thought I'd ask here to see if I might be overlooking something more straightforward. Any ideas on how to further isolate the error would be greatly appreciated! For the record, here is a list of things I've already tried: Rebooting the SQL Server machine. Fixes the issue temporarily, then the error returns within a minute or two of startup. (This is why I suspect a rogue group policy that is slow to apply fouling things up.) Importing all database objects from the Access 97 mdb into a new, clean mdb file. Makes no difference. Moving the Access 97 mdb file to a local directory on the SQL Server machine instead of accessing it via a share on the Win XP Pro LAN machine. This works, but does not solve the problem because the mdb needs to be on the client machine for performance reasons and the ability to work "stand alone". Plus, the same shared folder access works fine on all other servers / clients on my network. Compared all the SQL Server, Windows Server, etc versions to a known working setup and everything appears to be the same.

  Read the article

• SQL 2000: Intermittent Error 7399 with OLE DB Provider for Microsoft Jet

  - by Tim Lara

  I am using SQL Server 2000 on Windows Server 2003 SP2 and have set up a linked server to point at an Access 97 database using the OLE DB Provider 4.0 for Microsoft Jet. The problem I am having sounds almost exactly like the one described in this Microsoft KB article, except that the error I am getting is intermittent: http://support.microsoft.com/kb/814398 The SQL Server is running under the Local System account (which I don't have authority to change), and the Access 97 .mdb file that the linked server points to is on a Win XP Pro machine on the same LAN as the SQL Server machine, inside of a shared folder with permissions set to "Everyone" and "Full Control". Now, if the linked server connection never worked, it would make more sense that the problem is merely a permissions issue with the Local System account as the KB article above suggests, but the maddening thing is that sometimes the connection works just fine. When it fails, the error message is always the same: Error 7399: OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. [OLE/DB provider returned message: Unspecified error] OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: ]. Also, not only does the linked server setup occasionally work just fine on this one particular SQL Server, what is supposed to be exactly the same setup on 25 other servers works just fine EVERY TIME! Obviously, something in the non-working setup must not be exactly the same, but I'm having trouble figuring out where to look for the differences since the error message SQL Server returns is so vague. I know our sysadmins have had numerous issues with Active Directory replication across our domain, so my best guess is that there is some sort of odd group policy corruption going on, but I thought I'd ask here to see if I might be overlooking something more straightforward. Any ideas on how to further isolate the error would be greatly appreciated! For the record, here is a list of things I've already tried: Rebooting the SQL Server machine. Fixes the issue temporarily, then the error returns within a minute or two of startup. (This is why I suspect a rogue group policy that is slow to apply fouling things up.) Importing all database objects from the Access 97 mdb into a new, clean mdb file. Makes no difference. Moving the Access 97 mdb file to a local directory on the SQL Server machine instead of accessing it via a share on the Win XP Pro LAN machine. This works, but does not solve the problem because the mdb needs to be on the client machine for performance reasons and the ability to work "stand alone". Plus, the same shared folder access works fine on all other servers / clients on my network. Compared all the SQL Server, Windows Server, etc versions to a known working setup and everything appears to be the same.

  Read the article

• HT Link Sync Error after Ubuntu 10.04 LTS Installation

  - by marklab

  Update 1 I just assembled an exact replica of this server, and successfully installed Ubuntu 10.04 LTS in a RAID10 configuration. The success was confirmed by a login to the initial account. There must be a hardware component that is faulty. Since the error mentions HT, which I believe to be Hyper Threading, I will start with the CPUs. Please indicate if this error is more strongly associated with any other piece of hardware. Or make a recommendation of another approach that would be good for this issue. Issue I was attempting to install Ubuntu 10.04 LTS on this system with the board RAID10 configured. However, the installation failed at the partitioning stage by rebooting the system. Upon reboot, there is an error report after POST listing the following: Node0: NB WatchDog Timer Error Node1: HT Link Sync Error Node2: HT Link Sync Error ... Node7: HT Link Sync Error Press F1 to continue/resume. After pressing F1 the system will boot from the Ubuntu 10.04 LTS installation disc. However, it will fail at the same stage, and go through the same process from there. Hardware CPU: AMD OPTERON X12 6172 G34 2.1G 18MB Motherboard: Supermicro H8QG6-F HDD: WD Caviar Green 2TB 5.4K RPM Troubleshooting I disabled RAID10 on the system, and installed the Ubuntu on a single drive. It installed successfully. I then went back to a RAID10 setup and attempted to install on the system again, and was able to make it through the partitioning stage. However, upon reboot, the system reported: Error: file not found, and then booted me into the Grub Rescue console. I feel I have aggravated the problem at this point because when I attempted to install from the boot disc again, the system reboots upon hitting enter to even start the installation process. It does the same thing when trying to boot from an Ubuntu 11 disc. I have not been able to find any information on this HT Link Sync Error, which I feel may have started the problems I am experiencing now with the installation of the OS. I am also aware that Ubuntu is said not to be supported by the motherboard according to Supermicro's site. However, since I was able to install it successfully on a single drive, I do not believe it is incompatible. I would like to know a reason for why it's failing to install on/off.

  Read the article

• LUKS with LVM, mount is not persistent after reboot

  - by linxsaga

  I have created a Logical vol and used luks to encrypt it. But while rebooting the server. I get a error message (below), therefore I would have to enter the root pass and disable the /etc/fstab entry. So mount of the LUKS partition is not persistent during reboot using LUKS. I have this setup on RHEL6 and wondering what i could be missing. I want to the LV to get be mount on reboot. Later I would want to replace it with UUID instead of the device name. Error message on reboot: "Give root password for maintenance (or type Control-D to continue):" Here are the steps from the beginning: [root@rhel6 ~]# pvcreate /dev/sdb Physical volume "/dev/sdb" successfully created [root@rhel6 ~]# vgcreate vg01 /dev/sdb Volume group "vg01" successfully created [root@rhel6 ~]# lvcreate --size 500M -n lvol1 vg01 Logical volume "lvol1" created [root@rhel6 ~]# lvdisplay --- Logical volume --- LV Name /dev/vg01/lvol1 VG Name vg01 LV UUID nX9DDe-ctqG-XCgO-2wcx-ddy4-i91Y-rZ5u91 LV Write Access read/write LV Status available # open 0 LV Size 500.00 MiB Current LE 125 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 [root@rhel6 ~]# cryptsetup luksFormat /dev/vg01/lvol1 WARNING! ======== This will overwrite data on /dev/vg01/lvol1 irrevocably. Are you sure? (Type uppercase yes): YES Enter LUKS passphrase: Verify passphrase: [root@rhel6 ~]# mkdir /house [root@rhel6 ~]# cryptsetup luksOpen /dev/vg01/lvol1 house Enter passphrase for /dev/vg01/lvol1: [root@rhel6 ~]# mkfs.ext4 /dev/mapper/house mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) Stride=0 blocks, Stripe width=0 blocks 127512 inodes, 509952 blocks 25497 blocks (5.00%) reserved for the super user First data block=1 Maximum filesystem blocks=67633152 63 block groups 8192 blocks per group, 8192 fragments per group 2024 inodes per group Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409 Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 21 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. [root@rhel6 ~]# mount -t ext4 /dev/mapper/house /house PS: HERE I have successfully mounted: [root@rhel6 ~]# ls /house/ lost+found [root@rhel6 ~]# vim /etc/fstab -> as follow /dev/mapper/house /house ext4 defaults 1 2 [root@rhel6 ~]# vim /etc/crypttab -> entry as follows house /dev/vg01/lvol1 password [root@rhel6 ~]# mount -o remount /house [root@rhel6 ~]# ls /house/ lost+found [root@rhel6 ~]# umount /house/ [root@rhel6 ~]# mount -a -> SUCCESSFUL AGAIN [root@rhel6 ~]# ls /house/ lost+found Please let me know if I am missing anything here. Thanks in advance.

  Read the article

• Windows 7 remains powered on when restarting

  - by BombDefused

  I'm running windows 7 x64 on an MSI P67A-GD53 motherboard, in an Antec P280 Super Midi Towercase with a Corsair 650w PSU. I've just installed a second instance of windows 7 x64 on a separate disk (this is to keep my games separate from my work OS). The problem is that it appears now that I cannot restart from either instance of Windows 7. The shut down command, and sleep commands work as expected. When I try to restart, the shutdown happens but the system never reboots. Everything remains powered on, until I hold down the power button to force the power off. Ithink (but am not 100% sure) this has only started since I installed the second OS, and am assuming this has something to do with the motherboard needing to know which OS to run up again? Some other forums I've read suggest that the PSU has a major role in restart and could be at fault. Changing the boot order of the disks in the BIOS does not change anything. Any suggestions greatfully recieved! Update: I now have a reproduceable issue: I think the secondary OS install may have been a red herring. It was when windows tried to reboot during the install that I noticed the issue. After playing around with installing drivers, and rebooting many many times, I have found that it is the OC genie setting on the MSI motherboard that seems to trigger the problem. This makes sense as I only started using the OC genie feature a couple of weeks ago, and probably hadn't used restart in that time. However... simply turning off OC genie does not make the issue go away. I have to turn off OC genie, shutdown, start enter bios, go to the "Save and Exit" menu "Restore Defaults" yes to "Load optimized defaults", which will reset to clear the problem. Now when the PC boots into windows, I can restart as normal (and from the OS on either HDD). I only know how to control the issue, and don't still know the root cause. I'd like to be able to use the OC genie function if anyone can suggest a why I'm seeing this problem. Could it be that I'm drawing too much power when using OC feature?

  Read the article

• Adaptec 5805 after reboot don't starting

  - by Rakedko ShotGuns

  After rebooting the system, the controller is not included. It only works if the computer is shut down and turn off. Late i update firmware "Adaptec RAID 5805 Firmware Build 18948" How to fix the problem? add Log Configuration summary Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priorityHigh Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1 List item

  Read the article

• Troubleshooting an unstable internet connection

  - by Konrad Rudolph

  My MacBook Pro running OS X (10.9, but I had the same problem before) is connected to a Belkin router via WiFi and, using Virgin Media as the ISP, to the internet. The connection is extremely unstable – on some days, I get a ping timeout every few seconds. In addition, some domains seem to suffer general connectivity issues. For instance, I often find that while the youtube.com website loads, none of the videos (which are hosted on a separate domain) do. At other times, videos load but always fail to buffer, even though the actual connection speed is ok, even though I’ve disabled dash playback. Since I’m living in a rented room and the ISP contract isn’t actually mine I’ve got only limited possibilities of addressing the problem. In particular, I have no access to the router configuration and my non tech savvy landlady, while sympathetic, is not in a great hurry to hand the problem over to the ISP’s customer support. What’s more, I seem to be the only person in the house experiencing these problems – but I can imagine that this is simply because I’m the only one who’s using the internet continuously. I’m searching for specific tests that might be able to pinpoint – and ideally solve – the problem. So far all I’ve managed to do is establish that Virgin is routing my traffic in mysterious ways. Here’s an excerpt from traceroute google.co.uk. It’s worth mentioning that the host name doesn’t seem to matter a lot, the trace route is always the same. traceroute: Warning: google.co.uk has multiple addresses; using 62.254.36.148 traceroute to google.co.uk (62.254.36.148), 64 hops max, 52 byte packets 1 (192.168.2.1) 1.112 ms 1.300 ms 2.359 ms 2 10.100.32.1 (10.100.32.1) 11.926 ms 10.217 ms 24.987 ms 3 cmbg-core-1a-ae3-610.network.virginmedia.net (80.1.202.93) 28.809 ms * 66.653 ms 4 popl-bb-1b-ae16-0.network.virginmedia.net (212.43.163.141) 13.759 ms 126.504 ms 20.472 ms 5 nrth-bb-1b-et-010-0.network.virginmedia.net (62.253.175.57) 28.357 ms 16.398 ms 42.387 ms 6 nrth-bb-1c-ae1-0.network.virginmedia.net (62.253.174.110) 27.441 ms 15.622 ms 12.044 ms 7 lutn-icdn-1-ae0-0.network.virginmedia.net (62.253.175.82) 16.678 ms 28.463 ms 28.253 ms 8 * * * 9 * * * 10 * * * ^C If I let it, this goes on until the end of time. It never seems to reach a destination. Is this normal? A friend living in the same town who is also with Virgin Media has a more conventional traceroute output: 7 hops to google.co.uk, all of which send the ICMP TIME_EXCEEDED response. The obvious fix – rebooting the router – doesn’t seem to help. As far as I can tell, the WiFi connection is stable (I can always ping the router) so the problem is further downstream. I’ve tried using an alternative DNS before (OpenDNS) but if anything, this made things worse. In fact, it made all Google services nigh unreachable.

  Read the article

• Ubuntu 10.04 LTS - Dual monitor works only sometimes (ATI multi-desktop)

  - by Beres Botond

  I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW). I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine. But since a while it doesn't work properly anymore: At home it still works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. With the home monitor I can see the whole bootup process on both monitors (laptop + LCD) and it always just works fine. With the work monitor on the external LCD monitor I just see "No video input" until I get to the login screen, then it shows up there as well. But after login it will either: Flicker a few times, but then work OK. Or (more often) Flicker once and then go back to "No video input" again. I usually end up rebooting a few times until it works. Does anyone have any idea for fixing it? This is my xorg.conf currently: Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[6]-0" 0 0 Screen "amdcccle-Screen[6]-1" 1280 0 EndSection Section "Files" EndSection Section "Module" Load "glx" EndSection Section "ServerFlags" Option "Xinerama" "off" EndSection Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1440x900" EndSection Section "Device" Identifier "Default Device" Driver "fglrx" EndSection Section "Device" Identifier "amdcccle-Device[6]-0" Driver "fglrx" Option "Monitor-LVDS" "0-LVDS" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "amdcccle-Device[6]-1" Driver "fglrx" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:6:0:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[6]-0" Device "amdcccle-Device[6]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[6]-1" Device "amdcccle-Device[6]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• DVD Drive Failing on Windows 7

  - by Seth Spearman

  Hello, I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

  Read the article

• What the hell was THAT?!?

  - by Massimo

  My system is Windows XP SP3, updated with the latest patches. The PC is connected to a Cisco 877 ADSL router, which does NAT from the internal network to its single static public IP address. There are no forwarded ports, and the router's management console can only be accessed from the inside. I was doing two things: working on a remote office machine via VPN and browsing some web pages on the Cisco web site. The remote network is absolutely safe (it's a lab network, four virtual servers, no publicly accessible services and no users at all; also, none of what I'm going to describe ever happened there). The Cisco web site... well, I suppose is quite safe, too. Suddenly, something happened. Strange popups appears anywhere; programs claiming they're "antimalware", "antispyware" et so on begins autoinstalling; fake Windows Update and Security Center icons pop up in the system tray. svchost.exe began crashing repeatedly. Then, finally, after some minutes of this... BSOD. And, upon rebooting, BSOD again. Even in safe mode. Ok, that was obviously some virus/trojan/whatever. I had to install a new copy of Windows on another partition to clean things up. I found strange executables, services and DLLs almost anywhere. Amongst the other things, user32.dll and ndis.sys had been replaced. A fake software called "Antimalware Doctor" had been installed. There were services with completely random names or even GUIDs (!), and also ones called "IpSect" and "Darkness". There were executable files without an .exe extension. There were even two boot-class drivers, which I'm quite sure are the ones that finally caused the system to crash. A true massacre. Ok, now the questions: What the hell was that?!? It was something more than a simple virus! How did it manage to attack my computer, as I am behind a firewall and was not doing anything even only potentially harmful on the web at the time?

  Read the article

• DVD Drive Failing on Windows 7

  - by Seth Spearman

  I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

  Read the article

• Cannot exit X server, restart, shutdown or drop to tty when VGA monitor active

  - by terdon

  I have a strange problem. If I connect an external VGA monitor to my laptop, exiting the X environment in any way crashes the computer. For example, say I am working with my two monitors (the laptop's and one connected to my VGA port) active. Hitting Ctrl+Alt+F Key should take me down to a tty. What actually happens is that the VGA screen goes blank, as you would expect, but the laptop screen, although still on, shows nothing. I know the screen is on because it is slightly more illuminated than when it is off. When in this state, I can do nothing to regain access to the machine. I have tried: Ctrl+F Key (and even Ctrl+Alt+F Key, just in case) combinations and none seem to have any effect. Ctrl+Alt+Del : Nothing Magic SysRq key: Nothing Blindly typing my username and password and trying to reboot/shutdown or restart GDM or MDM: Nothing The only thing that works is a hard reset. The exact same behavior occurs when kiling the X server through Ctrl+Alt+Backspace, rebooting or shutdown. There is no difference if I reboot/shutdown/log out using the WM's graphical menu or if I use the shutdown or rebootcommands. It is also not WM-dependent. I have the same problem using Cinnamon, Gnome 3, MATE and xfce4. It is, however, VGA dependent. I have tried connecting another VGA monitor and have the same problem. I do not, however, have this problem if a screen is connected to the DisplayPort. It is, therefore, a VGA specific issue. To make things even stranger, this only occurs when both screens are active. If either the laptop screen or the VGA monitor is inactive the problem goes away. Finally, this problem arose when I installed the latest Linux Mint Debian (LMDE). It did not occur with the previous release of LMDE. I am not sure what has changed since I used the same kernel version in both releases (I had upgraded the kernel while on the previous release) and, I think, the same nvidia drivers. Oh, and yes, I have updated the nvidia driver. Hardware: Dell M4500 laptop CPU: Intel Core i7 RAM: 8GB Graphics: nVidia GT216 [Quadro FX 880M] Software: LMDE, kernel 3.2.0-2-amd64 Xorg: 1.11.4 nVidia kernel: 295.20-1+3.2.9-1 Possibly relevant files: /var/log/Xorg.0.log ~/.xsession-errors Does anyone have any ideas how to fix this? Thanks in advance for any help.

  Read the article

• Cassandra hangs with kernel exception when adding jna jar to classpath

  - by george_h

  I have a fresh installation of cassandra v2.0.8 on a RedHat Enterprise Linux v5. I have added a sym link of the jna.jar in cassandra's /lib folder. I start cassandra and it hangs after printing out the classpath in the terminal. When I check my /var/log/message I see this message Jun 9 07:19:05 Bigdata1 kernel: INFO: task java:4889 blocked for more than 120 seconds. Jun 9 07:19:05 Bigdata1 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Jun 9 07:19:05 Bigdata1 kernel: java D ffffffff8006272c 0 4889 1 4890 4888 (NOTLB) Jun 9 07:19:05 Bigdata1 kernel: ffff81022972ba08 0000000000000082 ffffffffffffffff ffffffffffffffff Jun 9 07:19:05 Bigdata1 kernel: ffffffffffffffff 0000000000000006 ffff81022c61c0c0 ffff81022fe6d7f0 Jun 9 07:19:05 Bigdata1 kernel: 0000006c16aa1b88 0000000000002704 ffff81022c61c2a8 00000005ffffffff Jun 9 07:19:05 Bigdata1 kernel: Call Trace: Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff8006468c>] __down_read+0x7a/0x92 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff800a6d77>] futex_wake+0x24/0xd4 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff8003e6c1>] do_futex+0x329/0xd42 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff8008ee54>] enqueue_task+0x41/0x56 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff8008eebf>] __activate_task+0x56/0x6d Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff80047297>] try_to_wake_up+0x472/0x484 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff8008eca2>] dequeue_task+0x18/0x37 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff800a7ee6>] sys_futex+0x11f/0x140 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff800a7d03>] exit_robust_list+0x51/0x115 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff80035857>] mm_release+0xac/0xc0 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff800421e9>] exit_mm+0x16/0xf7 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff800158d6>] do_exit+0x2e7/0x931 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff8004953a>] cpuset_exit+0x0/0x88 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff8002b96c>] get_signal_to_deliver+0x465/0x494 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff8005b090>] do_notify_resume+0x9c/0x7af Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff80131c1f>] avc_has_perm+0x46/0x58 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff8008f4a9>] default_wake_function+0x0/0xe Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff8008ea17>] set_load_weight+0x98/0xb2 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff800624c6>] __sched_text_start+0xf6/0xbd0 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff8008ec58>] task_rq_lock+0x3d/0x6f Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff8008ee54>] enqueue_task+0x41/0x56 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff800bb684>] audit_syscall_exit+0x329/0x344 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff800a7ee6>] sys_futex+0x11f/0x140 Jun 9 07:19:05 Bigdata1 kernel: [<ffffffff8005d33e>] int_signal+0x12/0x17 The only way to stop it is by rebooting the server. If I remove the jna.jar symlink then everything is fine. Anyone know why this is happening ?

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37  | Next Page >