Search Results

Search found 9058 results on 363 pages for 'length'.

Page 336/363 | < Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >

• got VPN l2l connect between a site & HQ but not traffice using ASA5505 on both ends

  - by vinlata

  Hi, Could anyone see what did I do wrong here? this is one configuration of site1 to HQ on ASA5505, I can get connected but seems like no traffic going (allowed) between them, could it be a NAT issue? any helps would much be appreciated Thanks interface Vlan1 nameif inside security-level 100 ip address 172.30.205.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address pppoe setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 shutdown ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! passwd .dIuXDIYzD6RSHz7 encrypted ftp mode passive dns server-group DefaultDNS domain-name errg.net object-group network HQ network-object 172.22.0.0 255.255.0.0 network-object 172.22.0.0 255.255.128.0 network-object 172.22.0.0 255.255.255.128 network-object 172.22.1.0 255.255.255.128 network-object 172.22.1.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list outside_access_in extended permit icmp any any echo-reply access-list outside_20_cryptomap extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list inside_nat0_outbound extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list policy-nat extended permit ip 172.30.205.0 255.255.255.0 172.22.0.0 255.255.0.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) 172.30.205.0 access-list policy-nat access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute username errgadmin password Os98gTdF8BZ0X2Px encrypted privilege 15 http server enable http 64.42.2.224 255.255.255.240 outside http 172.22.0.0 255.255.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 190 match address outside_20_cryptomap crypto map outside_map 190 set pfs crypto map outside_map 190 set peer 66.7.249.109 crypto map outside_map 190 set transform-set ESP-3DES-SHA crypto map outside_map 190 set phase1-mode aggressive crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 30 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp nat-traversal 190 crypto isakmp ipsec-over-tcp port 10000 tunnel-group 66.7.249.109 type ipsec-l2l tunnel-group 66.7.249.109 ipsec-attributes pre-shared-key * telnet timeout 5 ssh 172.30.205.0 255.255.255.0 inside ssh 172.22.0.0 255.255.0.0 outside ssh 64.42.2.224 255.255.255.240 outside ssh 172.25.0.0 255.255.128.0 outside ssh timeout 5 console timeout 0 management-access inside vpdn group PPPoEx request dialout pppoe vpdn group PPPoEx localname [email protected] vpdn group PPPoEx ppp authentication pap vpdn username [email protected] password ********* dhcpd address 172.30.205.100-172.30.205.131 inside dhcpd dns 172.22.0.133 68.94.156.1 interface inside dhcpd wins 172.22.0.133 interface inside dhcpd domain errg.net interface inside dhcpd enable inside ! ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! end

  Read the article

• I have a NGINX server configured to work with node.js, but many times a file of 1.03MB of js is not loaded by various browser and various pc

  - by Totty

  I'm using this in a local LAN so it should be quite fast. The nginx server use the node.js server to serve static files, so it must pass throught node.js to download the files, but that is not a problem when I'm not using the nginx. In chrome with debugger on I can see that the status is: 206 - partial content and it only has downloaded 31KB of 1.03MB. After 1.1 min it turns red and the status failed. Waiting time: 6ms Receiving: 1.1 min The headers in google chrom: Request URL:http://192.168.1.16/production/assembly/script/production.js Request Method:GET Status Code:206 Partial Content Request Headersview source Accept:*/* Accept-Charset:ISO-8859-1,utf-8;q=0.7,*;q=0.3 Accept-Encoding:gzip,deflate,sdch Accept-Language:pt-PT,pt;q=0.8,en-US;q=0.6,en;q=0.4 Connection:keep-alive Cookie:connect.sid=s%3Abls2qobcCaJ%2FyBNZwedtDR9N.0vD4Fi03H1bEdCszGsxIjjK0lZIjJhLnToWKFVxZOiE Host:192.168.1.16 If-Range:"1081715-1350053827000" Range:bytes=16090-16090 Referer:http://192.168.1.16/production/assembly/ User-Agent:Mozilla/5.0 (Windows NT 6.0) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Response Headersview source Accept-Ranges:bytes Cache-Control:public, max-age=0 Connection:keep-alive Content-Length:1 Content-Range:bytes 16090-16090/1081715 Content-Type:application/javascript Date:Mon, 15 Oct 2012 09:18:50 GMT ETag:"1081715-1350053827000" Last-Modified:Fri, 12 Oct 2012 14:57:07 GMT Server:nginx/1.1.19 X-Powered-By:Express My nginx configurations: File 1: user totty; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /home/totty/web/production01_server/node_modules/production/_logs/_NGINX_access.txt; error_log /home/totty/web/production01_server/node_modules/production/_logs/_NGINX_error.txt; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; # gzip_vary on; # gzip_proxied any; # gzip_comp_level 6; # gzip_buffers 16 8k; # gzip_http_version 1.1; # gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## autoindex on; include /home/totty/web/production01_server/_deployment/nginxConfigs/server/*; } File that is included by the previous file: server { # custom location for entry # using only "/" instead of "/production/assembly" it # would allow you to go to "thatip/". In this way # we are limiting to "thatip/production/assembly/" location /production/assembly/ { # ip and port used in node.js proxy_pass http://127.0.0.1:3000/; } location /production/assembly.mongo/ { proxy_pass http://127.0.0.1:9000/; proxy_redirect off; } location /production/assembly.logs/ { autoindex on; alias /home/totty/web/production01_server/node_modules/production/_logs/; } }

  Read the article

• Hard drive after PCB swap strange stuff

  - by ramyy

  I’ve done a PCB swap to my HDD. The HDD model is: WD6400AAKS-00A7B2. The original PCB PN matches the new one (first three letter groups), though the cache mismatches (16MB original, 8MB new). The Hardware store that made the swap told me it was hard to do the swap, they have done firmware adaptation. I can see that this firmware version does not match the original, (01.03B01 original, 05.04E05 new). Still I can see that the serial number and model of the drive is correct, the hard drive appeared normal in the BIOS, all the partitions show and everything appears normal. I have encountered three things though, I have left the drive non operated for 2-3 weeks after the swap to avoid corrupting the data or anything else the new PCB might cause, until I buy a new drive and backup the data. I got a drive, and when I powered the old drive manually (I have a laptop, I use a normal desktop power supply and a USB/SATA connector), I heard the motor start and I could hear ticking as if the motor’s somehow struggling to start, and then the motor sound starts again then the ticking, and so on.. I tried powering again it happened again. The third time it started normally and I could see everything normally. I took the chance and copied all the data over to the new drive. When I was done, I powered off the drive (after more than 25 hours of continuous operation), tried to power it up again and it did so normally, and so are the times I powered it up later; but I got very suspicious now. What could be the problem here? And what happened new, it used to power normally after the swap directly? The second thing that happened is that I found size differences with some files; some include movies, songs, (.iso) files for games, and programs. I could find the size is the same, but size on disk is a little more on the new drive for these files. . I’ve tried some of those files (with size differences) they worked fine. They are not too much but still make you suspicious of the integrity of the data copied; one cannot try if all files are working for about (580 GB) worth of data. I tried copying these files on the same partition they exist of the old drive; they are the same in size as when copied to the new drive (allocation unit size not the issue). I took an image of a partition (sector by sector including empty ones) and when I explore it, these file sizes are equal to the original (old drive); I copy them anywhere else their size on disk, increases, i.e becomes equal to the ones I copy from the old drive itself anywhere. Why the size difference and can one trust the integrity of the data?? The third thing is that when I connect my new external USB HDD, the partitions of the old HDD unmount and then mount again. Connected are: (USB mouse + Old HDD) then external HDD. Why that happens?? Considering the following: I compared the SMART reports from after the swap directly and after the copying, no error readings or reallocated sectors where reported. Here they are: http://www.image-share.com/ijpg-1939-219.html I later ran both WD data life guard tests and they came out passed. I’m worried for this drive since I must be sure the data is fine and safe on the new one, and I will consider it backup for the new one, since you can’t trust anything anymore. I hope you can forgive me for the length of the post, but couldn’t ignore any of the details, this hard drive contains very important data to me and I have to deal with the situation with great care.

  Read the article

• NLog Exception Details Renderer

  - by jtimperley

  Originally posted on: http://geekswithblogs.net/jtimperley/archive/2013/07/28/nlog-exception-details-renderer.aspxI recently switch from Microsoft's Enterprise Library Logging block to NLog.  In my opinion, NLog offers a simpler and much cleaner configuration section with better use of placeholders, complemented by custom variables. Despite this, I found one deficiency in my migration; I had lost the ability to simply render all details of an exception into our logs and notification emails. This is easily remedied by implementing a custom layout renderer. Start by extending 'NLog.LayoutRenderers.LayoutRenderer' and overriding the 'Append' method. using System.Text; using NLog; using NLog.Config; using NLog.LayoutRenderers;   [ThreadAgnostic] [LayoutRenderer(Name)] public class ExceptionDetailsRenderer : LayoutRenderer { public const string Name = "exceptiondetails";   protected override void Append(StringBuilder builder, LogEventInfo logEvent) { // Todo: Append details to StringBuilder } }   Now that we have a base layout renderer, we simply need to add the formatting logic to add exception details as well as inner exception details. This is done using reflection with some simple filtering for the properties that are already being rendered. I have added an additional 'Register' method, allowing the definition to be registered in code, rather than in configuration files. This complements by 'LogWrapper' class which standardizes writing log entries throughout my applications. using System; using System.Collections.Generic; using System.Linq; using System.Reflection; using System.Text; using NLog; using NLog.Config; using NLog.LayoutRenderers;   [ThreadAgnostic] [LayoutRenderer(Name)] public sealed class ExceptionDetailsRenderer : LayoutRenderer { public const string Name = "exceptiondetails"; private const string _Spacer = "======================================"; private List<string> _FilteredProperties;   private List<string> FilteredProperties { get { if (_FilteredProperties == null) { _FilteredProperties = new List<string> { "StackTrace", "HResult", "InnerException", "Data" }; }   return _FilteredProperties; } }   public bool LogNulls { get; set; }   protected override void Append(StringBuilder builder, LogEventInfo logEvent) { Append(builder, logEvent.Exception, false); }   private void Append(StringBuilder builder, Exception exception, bool isInnerException) { if (exception == null) { return; }   builder.AppendLine();   var type = exception.GetType(); if (isInnerException) { builder.Append("Inner "); }   builder.AppendLine("Exception Details:") .AppendLine(_Spacer) .Append("Exception Type: ") .AppendLine(type.ToString());   var bindingFlags = BindingFlags.Instance | BindingFlags.Public; var properties = type.GetProperties(bindingFlags); foreach (var property in properties) { var propertyName = property.Name; var isFiltered = FilteredProperties.Any(filter => String.Equals(propertyName, filter, StringComparison.InvariantCultureIgnoreCase)); if (isFiltered) { continue; }   var propertyValue = property.GetValue(exception, bindingFlags, null, null, null); if (propertyValue == null && !LogNulls) { continue; }   var valueText = propertyValue != null ? propertyValue.ToString() : "NULL"; builder.Append(propertyName) .Append(": ") .AppendLine(valueText); }   AppendStackTrace(builder, exception.StackTrace, isInnerException); Append(builder, exception.InnerException, true); }   private void AppendStackTrace(StringBuilder builder, string stackTrace, bool isInnerException) { if (String.IsNullOrEmpty(stackTrace)) { return; }   builder.AppendLine();   if (isInnerException) { builder.Append("Inner "); }   builder.AppendLine("Exception StackTrace:") .AppendLine(_Spacer) .AppendLine(stackTrace); }   public static void Register() { Type definitionType; var layoutRenderers = ConfigurationItemFactory.Default.LayoutRenderers; if (layoutRenderers.TryGetDefinition(Name, out definitionType)) { return; }   layoutRenderers.RegisterDefinition(Name, typeof(ExceptionDetailsRenderer)); LogManager.ReconfigExistingLoggers(); } } For brevity I have removed the Trace, Debug, Warn, and Fatal methods. They are modelled after the Info methods. As mentioned above, note how the log wrapper automatically registers our custom layout renderer reducing the amount of application configuration required. using System; using NLog;   public static class LogWrapper { static LogWrapper() { ExceptionDetailsRenderer.Register(); }   #region Log Methods   public static void Info(object toLog) { Log(toLog, LogLevel.Info); }   public static void Info(string messageFormat, params object[] parameters) { Log(messageFormat, parameters, LogLevel.Info); }   public static void Error(object toLog) { Log(toLog, LogLevel.Error); }   public static void Error(string message, Exception exception) { Log(message, exception, LogLevel.Error); }   private static void Log(string messageFormat, object[] parameters, LogLevel logLevel) { string message = parameters.Length == 0 ? messageFormat : string.Format(messageFormat, parameters); Log(message, (Exception)null, logLevel); }   private static void Log(object toLog, LogLevel logLevel, LogType logType = LogType.General) { if (toLog == null) { throw new ArgumentNullException("toLog"); }   if (toLog is Exception) { var exception = toLog as Exception; Log(exception.Message, exception, logLevel, logType); } else { var message = toLog.ToString(); Log(message, null, logLevel, logType); } }   private static void Log(string message, Exception exception, LogLevel logLevel, LogType logType = LogType.General) { if (exception == null && String.IsNullOrEmpty(message)) { return; }   var logger = GetLogger(logType); // Note: Using the default constructor doesn't set the current date/time var logInfo = new LogEventInfo(logLevel, logger.Name, message); logInfo.Exception = exception; logger.Log(logInfo); }   private static Logger GetLogger(LogType logType) { var loggerName = logType.ToString(); return LogManager.GetLogger(loggerName); }   #endregion   #region LogType private enum LogType { General } #endregion } The following configuration is similar to what is provided for each of my applications. The 'application' variable is all that differentiates the various applications in all of my environments, the rest has been standardized. Depending on your needs to tweak this configuration while developing and debugging, this section could easily be pushed back into code similar to the registering of our custom layout renderer.   <?xml version="1.0"?>   <configuration> <configSections> <section name="nlog" type="NLog.Config.ConfigSectionHandler, NLog"/> </configSections> <nlog xmlns="http://www.nlog-project.org/schemas/NLog.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <variable name="application" value="Example"/> <targets> <target type="EventLog" name="EventLog" source="${application}" log="${application}" layout="${message}${onexception: ${newline}${exceptiondetails}}"/> <target type="Mail" name="Email" smtpServer="smtp.example.local" from="[email protected]" to="[email protected]" subject="(${machinename}) ${application}: ${level}" body="Machine: ${machinename}${newline}Timestamp: ${longdate}${newline}Level: ${level}${newline}Message: ${message}${onexception: ${newline}${exceptiondetails}}"/> </targets> <rules> <logger name="*" minlevel="Debug" writeTo="EventLog" /> <logger name="*" minlevel="Error" writeTo="Email" /> </rules> </nlog> </configuration>   Now go forward, create your custom exceptions without concern for including their custom properties in your exception logs and notifications.

  Read the article

• Parallelism in .NET – Part 5, Partitioning of Work

  - by Reed

  When parallelizing any routine, we start by decomposing the problem.  Once the problem is understood, we need to break our work into separate tasks, so each task can be run on a different processing element.  This process is called partitioning. Partitioning our tasks is a challenging feat.  There are opposing forces at work here: too many partitions adds overhead, too few partitions leaves processors idle.  Trying to work the perfect balance between the two extremes is the goal for which we should aim.  Luckily, the Task Parallel Library automatically handles much of this process.  However, there are situations where the default partitioning may not be appropriate, and knowledge of our routines may allow us to guide the framework to making better decisions. First off, I’d like to say that this is a more advanced topic.  It is perfectly acceptable to use the parallel constructs in the framework without considering the partitioning taking place.  The default behavior in the Task Parallel Library is very well-behaved, even for unusual work loads, and should rarely be adjusted.  I have found few situations where the default partitioning behavior in the TPL is not as good or better than my own hand-written partitioning routines, and recommend using the defaults unless there is a strong, measured, and profiled reason to avoid using them.  However, understanding partitioning, and how the TPL partitions your data, helps in understanding the proper usage of the TPL. I indirectly mentioned partitioning while discussing aggregation.  Typically, our systems will have a limited number of Processing Elements (PE), which is the terminology used for hardware capable of processing a stream of instructions.  For example, in a standard Intel i7 system, there are four processor cores, each of which has two potential hardware threads due to Hyperthreading.  This gives us a total of 8 PEs – theoretically, we can have up to eight operations occurring concurrently within our system. In order to fully exploit this power, we need to partition our work into Tasks.  A task is a simple set of instructions that can be run on a PE.  Ideally, we want to have at least one task per PE in the system, since fewer tasks means that some of our processing power will be sitting idle.  A naive implementation would be to just take our data, and partition it with one element in our collection being treated as one task.  When we loop through our collection in parallel, using this approach, we’d just process one item at a time, then reuse that thread to process the next, etc.  There’s a flaw in this approach, however.  It will tend to be slower than necessary, often slower than processing the data serially. The problem is that there is overhead associated with each task.  When we take a simple foreach loop body and implement it using the TPL, we add overhead.  First, we change the body from a simple statement to a delegate, which must be invoked.  In order to invoke the delegate on a separate thread, the delegate gets added to the ThreadPool’s current work queue, and the ThreadPool must pull this off the queue, assign it to a free thread, then execute it.  If our collection had one million elements, the overhead of trying to spawn one million tasks would destroy our performance. The answer, here, is to partition our collection into groups, and have each group of elements treated as a single task.  By adding a partitioning step, we can break our total work into small enough tasks to keep our processors busy, but large enough tasks to avoid overburdening the ThreadPool.  There are two clear, opposing goals here: Always try to keep each processor working, but also try to keep the individual partitions as large as possible. When using Parallel.For, the partitioning is always handled automatically.  At first, partitioning here seems simple.  A naive implementation would merely split the total element count up by the number of PEs in the system, and assign a chunk of data to each processor.  Many hand-written partitioning schemes work in this exactly manner.  This perfectly balanced, static partitioning scheme works very well if the amount of work is constant for each element.  However, this is rarely the case.  Often, the length of time required to process an element grows as we progress through the collection, especially if we’re doing numerical computations.  In this case, the first PEs will finish early, and sit idle waiting on the last chunks to finish.  Sometimes, work can decrease as we progress, since previous computations may be used to speed up later computations.  In this situation, the first chunks will be working far longer than the last chunks.  In order to balance the workload, many implementations create many small chunks, and reuse threads.  This adds overhead, but does provide better load balancing, which in turn improves performance. The Task Parallel Library handles this more elaborately.  Chunks are determined at runtime, and start small.  They grow slowly over time, getting larger and larger.  This tends to lead to a near optimum load balancing, even in odd cases such as increasing or decreasing workloads.  Parallel.ForEach is a bit more complicated, however. When working with a generic IEnumerable<T>, the number of items required for processing is not known in advance, and must be discovered at runtime.  In addition, since we don’t have direct access to each element, the scheduler must enumerate the collection to process it.  Since IEnumerable<T> is not thread safe, it must lock on elements as it enumerates, create temporary collections for each chunk to process, and schedule this out.  By default, it uses a partitioning method similar to the one described above.  We can see this directly by looking at the Visual Partitioning sample shipped by the Task Parallel Library team, and available as part of the Samples for Parallel Programming.  When we run the sample, with four cores and the default, Load Balancing partitioning scheme, we see this: The colored bands represent each processing core.  You can see that, when we started (at the top), we begin with very small bands of color.  As the routine progresses through the Parallel.ForEach, the chunks get larger and larger (seen by larger and larger stripes). Most of the time, this is fantastic behavior, and most likely will out perform any custom written partitioning.  However, if your routine is not scaling well, it may be due to a failure in the default partitioning to handle your specific case.  With prior knowledge about your work, it may be possible to partition data more meaningfully than the default Partitioner. There is the option to use an overload of Parallel.ForEach which takes a Partitioner<T> instance.  The Partitioner<T> class is an abstract class which allows for both static and dynamic partitioning.  By overriding Partitioner<T>.SupportsDynamicPartitions, you can specify whether a dynamic approach is available.  If not, your custom Partitioner<T> subclass would override GetPartitions(int), which returns a list of IEnumerator<T> instances.  These are then used by the Parallel class to split work up amongst processors.  When dynamic partitioning is available, GetDynamicPartitions() is used, which returns an IEnumerable<T> for each partition.  If you do decide to implement your own Partitioner<T>, keep in mind the goals and tradeoffs of different partitioning strategies, and design appropriately. The Samples for Parallel Programming project includes a ChunkPartitioner class in the ParallelExtensionsExtras project.  This provides example code for implementing your own, custom allocation strategies, including a static allocator of a given chunk size.  Although implementing your own Partitioner<T> is possible, as I mentioned above, this is rarely required or useful in practice.  The default behavior of the TPL is very good, often better than any hand written partitioning strategy.

  Read the article

• Oracle Data Mining a Star Schema: Telco Churn Case Study

  - by charlie.berger

  There is a complete and detailed Telco Churn case study "How to" Blog Series just posted by Ari Mozes, ODM Dev. Manager.  In it, Ari provides detailed guidance in how to leverage various strengths of Oracle Data Mining including the ability to: mine Star Schemas and join tables and views together to obtain a complete 360 degree view of a customer combine transactional data e.g. call record detail (CDR) data, etc. define complex data transformation, model build and model deploy analytical methodologies inside the Database  His blog is posted in a multi-part series.  Below are some opening excerpts for the first 3 blog entries.  This is an excellent resource for any novice to skilled data miner who wants to gain competitive advantage by mining their data inside the Oracle Database.  Many thanks Ari! Mining a Star Schema: Telco Churn Case Study (1 of 3) One of the strengths of Oracle Data Mining is the ability to mine star schemas with minimal effort.  Star schemas are commonly used in relational databases, and they often contain rich data with interesting patterns.  While dimension tables may contain interesting demographics, fact tables will often contain user behavior, such as phone usage or purchase patterns.  Both of these aspects - demographics and usage patterns - can provide insight into behavior.Churn is a critical problem in the telecommunications industry, and companies go to great lengths to reduce the churn of their customer base.  One case study1 describes a telecommunications scenario involving understanding, and identification of, churn, where the underlying data is present in a star schema.  That case study is a good example for demonstrating just how natural it is for Oracle Data Mining to analyze a star schema, so it will be used as the basis for this series of posts...... Mining a Star Schema: Telco Churn Case Study (2 of 3) This post will follow the transformation steps as described in the case study, but will use Oracle SQL as the means for preparing data.  Please see the previous post for background material, including links to the case study and to scripts that can be used to replicate the stages in these posts.1) Handling missing values for call data recordsThe CDR_T table records the number of phone minutes used by a customer per month and per call type (tariff).  For example, the table may contain one record corresponding to the number of peak (call type) minutes in January for a specific customer, and another record associated with international calls in March for the same customer.  This table is likely to be fairly dense (most type-month combinations for a given customer will be present) due to the coarse level of aggregation, but there may be some missing values.  Missing entries may occur for a number of reasons: the customer made no calls of a particular type in a particular month, the customer switched providers during the timeframe, or perhaps there is a data entry problem.  In the first situation, the correct interpretation of a missing entry would be to assume that the number of minutes for the type-month combination is zero.  In the other situations, it is not appropriate to assume zero, but rather derive some representative value to replace the missing entries.  The referenced case study takes the latter approach.  The data is segmented by customer and call type, and within a given customer-call type combination, an average number of minutes is computed and used as a replacement value.In SQL, we need to generate additional rows for the missing entries and populate those rows with appropriate values.  To generate the missing rows, Oracle's partition outer join feature is a perfect fit.  select cust_id, cdre.tariff, cdre.month, minsfrom cdr_t cdr partition by (cust_id) right outer join     (select distinct tariff, month from cdr_t) cdre     on (cdr.month = cdre.month and cdr.tariff = cdre.tariff);   ....... Mining a Star Schema: Telco Churn Case Study (3 of 3) Now that the "difficult" work is complete - preparing the data - we can move to building a predictive model to help identify and understand churn.The case study suggests that separate models be built for different customer segments (high, medium, low, and very low value customer groups).  To reduce the data to a single segment, a filter can be applied: create or replace view churn_data_high asselect * from churn_prep where value_band = 'HIGH'; It is simple to take a quick look at the predictive aspects of the data on a univariate basis.  While this does not capture the more complex multi-variate effects as would occur with the full-blown data mining algorithms, it can give a quick feel as to the predictive aspects of the data as well as validate the data preparation steps.  Oracle Data Mining includes a predictive analytics package which enables quick analysis. begin  dbms_predictive_analytics.explain(   'churn_data_high','churn_m6','expl_churn_tab'); end; /select * from expl_churn_tab where rank <= 5 order by rank; ATTRIBUTE_NAME       ATTRIBUTE_SUBNAME EXPLANATORY_VALUE RANK-------------------- ----------------- ----------------- ----------LOS_BAND                                      .069167052          1MINS_PER_TARIFF_MON  PEAK-5                   .034881648          2REV_PER_MON          REV-5                    .034527798          3DROPPED_CALLS                                 .028110322          4MINS_PER_TARIFF_MON  PEAK-4                   .024698149          5From the above results, it is clear that some predictors do contain information to help identify churn (explanatory value > 0).  The strongest uni-variate predictor of churn appears to be the customer's (binned) length of service.  The second strongest churn indicator appears to be the number of peak minutes used in the most recent month.  The subname column contains the interior piece of the DM_NESTED_NUMERICALS column described in the previous post.  By using the object relational approach, many related predictors are included within a single top-level column. .....   NOTE:  These are just EXCERPTS.  Click here to start reading the Oracle Data Mining a Star Schema: Telco Churn Case Study from the beginning.    

  Read the article

• SSIS Lookup component tuning tips

  - by jamiet

  Yesterday evening I attended a London meeting of the UK SQL Server User Group at Microsoft’s offices in London Victoria. As usual it was both a fun and informative evening and in particular there seemed to be a few questions arising about tuning the SSIS Lookup component; I rattled off some comments and figured it would be prudent to drop some of them into a dedicated blog post, hence the one you are reading right now. Scene setting A popular pattern in SSIS is to use a Lookup component to determine whether a record in the pipeline already exists in the intended destination table or not and I cover this pattern in my 2006 blog post Checking if a row exists and if it does, has it changed? (note to self: must rewrite that blog post for SSIS2008). Fundamentally the SSIS lookup component (when using FullCache option) sucks some data out of a database and holds it in memory so that it can be compared to data in the pipeline. One of the big benefits of using SSIS dataflows is that they process data one buffer at a time; that means that not all of the data from your source exists in the dataflow at the same time and is why a SSIS dataflow can process data volumes that far exceed the available memory. However, that only applies to data in the pipeline; for reasons that are hopefully obvious ALL of the data in the lookup set must exist in the memory cache for the duration of the dataflow’s execution which means that any memory used by the lookup cache will not be available to be used as a pipeline buffer. Moreover, there’s an obvious correlation between the amount of data in the lookup cache and the time it takes to charge that cache; the more data you have then the longer it will take to charge and the longer you have to wait until the dataflow actually starts to do anything. For these reasons your goal is simple: ensure that the lookup cache contains as little data as possible. General tips Here is a simple tick list you can follow in order to tune your lookups: Use a SQL statement to charge your cache, don’t just pick a table from the dropdown list made available to you. (Read why in SELECT *... or select from a dropdown in an OLE DB Source component?) Only pick the columns that you need, ignore everything else Make the database columns that your cache is populated from as narrow as possible. If a column is defined as VARCHAR(20) then SSIS will allocate 20 bytes for every value in that column – that is a big waste if the actual values are significantly less than 20 characters in length. Do you need DT_WSTR typed columns or will DT_STR suffice? DT_WSTR uses twice the amount of space to hold values that can be stored using a DT_STR so if you can use DT_STR, consider doing so. Same principle goes for the numerical datatypes DT_I2/DT_I4/DT_I8. Only populate the cache with data that you KNOW you will need. In other words, think about your WHERE clause! Thinking outside the box It is tempting to build a large monolithic dataflow that does many things, one of which is a Lookup. Often though you can make better use of your available resources by, well, mixing things up a little and here are a few ideas to get your creative juices flowing: There is no rule that says everything has to happen in a single dataflow. If you have some particularly resource intensive lookups then consider putting that lookup into a dataflow all of its own and using raw files to pass the pipeline data in and out of that dataflow. Know your data. If you think, for example, that the majority of your incoming rows will match with only a small subset of your lookup data then consider chaining multiple lookup components together; the first would use a FullCache containing that data subset and the remaining data that doesn’t find a match could be passed to a second lookup that perhaps uses a NoCache lookup thus negating the need to pull all of that least-used lookup data into memory. Do you need to process all of your incoming data all at once? If you can process different partitions of your data separately then you can partition your lookup cache as well. For example, if you are using a lookup to convert a location into a [LocationId] then why not process your data one region at a time? This will mean your lookup cache only has to contain data for the location that you are currently processing and with the ability of the Lookup in SSIS2008 and beyond to charge the cache using a dynamically built SQL statement you’ll be able to achieve it using the same dataflow and simply loop over it using a ForEach loop. Taking the previous data partitioning idea further … a dataflow can contain more than one data path so why not split your data using a conditional split component and, again, charge your lookup caches with only the data that they need for that partition. Lookups have two uses: to (1) find a matching row from the lookup set and (2) put attributes from that matching row into the pipeline. Ask yourself, do you need to do these two things at the same time? After all once you have the key column(s) from your lookup set then you can use that key to get the rest of attributes further downstream, perhaps even in another dataflow. Are you using the same lookup data set multiple times? If so, consider the file caching option in SSIS 2008 and beyond. Above all, experiment and be creative with different combinations. You may be surprised at what works. Final  thoughts If you want to know more about how the Lookup component differs in SSIS2008 from SSIS2005 then I have a dedicated blog post about that at Lookup component gets a makeover. I am on a mini-crusade at the moment to get a BULK MERGE feature into the database engine, the thinking being that if the database engine can quickly merge massive amounts of data in a similar manner to how it can insert massive amounts using BULK INSERT then that’s a lot of work that wouldn’t have to be done in the SSIS pipeline. If you think that is a good idea then go and vote for BULK MERGE on Connect. If you have any other tips to share then please stick them in the comments. Hope this helps! @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Understanding 400 Bad Request Exception

  - by imran_ku07

      Introduction:          Why I am getting this exception? What is the cause of this error. Developers are always curious to know the root cause of an exception, even though they found the solution from elsewhere. So what is the reason of this exception (400 Bad Request).The answer is security. Security is an important feature for any application. ASP.NET try to his best to give you more secure application environment as possible. One important security feature is related to URLs. Because there are various ways a hacker can try to access server resource. Therefore it is important to make your application as secure as possible. Fortunately, ASP.NET provides this security by throwing an exception of Bad Request whenever he feels. In this Article I am try to present when ASP.NET feels to throw this exception. You will also see some new ASP.NET 4 features which gives developers some control on this situation.   Description:   http.sys Restrictions:           It is interesting to note that after deploying your application on windows server that runs IIS 6 or higher, the first receptionist of HTTP request is the kernel mode HTTP driver: http.sys. Therefore for completing your request successfully you need to present your validity to http.sys and must pass the http.sys restriction.           Every http request URL must not contain any character from ASCII range of 0x00 to 0x1F, because they are not printable. These characters are invalid because these are invalid URL characters as defined in RFC 2396 of the IETF. But a question may arise that how it is possible to send unprintable character. The answer is that when you send your request from your application in binary format.           Another restriction is on the size of the request. A request containg protocal, server name, headers, query string information and individual headers sent along with the request must not exceed 16KB. Also individual header should not exceed 16KB.           Any individual path segment (the portion of the URL that does not include protocol, server name, and query string, for example, http://a/b/c?d=e,  here the b and c are individual path) must not contain more than 260 characters. Also http.sys disallows URLs that have more than 255 path segments.           If any of the above rules are not follow then you will get 400 Bad Request Exception. The reason for this restriction is due to hack attacks against web servers involve encoding the URL with different character representations.           You can change the default behavior enforced by http.sys using some Registry switches present at HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters    ASP.NET Restrictions:           After passing the restrictions enforced by the kernel mode http.sys then the request is handed off to IIS and then to ASP.NET engine and then again request has to pass some restriction from ASP.NET in order to complete it successfully.           ASP.NET only allows URL path lengths to 260 characters(only paths, for example http://a/b/c/d, here path is from a to d). This means that if you have long paths containing 261 characters then you will get the Bad Request exception. This is due to NTFS file-path limit.           Another restriction is that which characters can be used in URL path portion.You can use any characters except some characters because they are called invalid characters in path. Here are some of these invalid character in the path portion of a URL, <,>,*,%,&,:,\,?. For confirming this just right click on your Solution Explorer and Add New Folder and name this File to any of the above character, you will get the message. Files or folders cannot be empty strings nor they contain only '.' or have any of the following characters.....            For checking the above situation i have created a Web Application and put Default.aspx inside A%A folder (created from windows explorer), then navigate to, http://localhost:1234/A%25A/Default.aspx, what i get response from server is the Bad Request exception. The reason is that %25 is the % character which is invalid URL path character in ASP.NET. However you can use these characters in query string.           The reason for these restrictions are due to security, for example with the help of % you can double encode the URL path portion and : is used to get some specific resource from server.   New ASP.NET 4 Features:           It is worth to discuss the new ASP.NET 4 features that provides some control in the hand of developer. Previously we are restricted to 260 characters path length and restricted to not use some of characters, means these characters cannot become the part of the URL path segment.           You can configure maxRequestPathLength and maxQueryStringLength to allow longer or shorter paths and query strings. You can also customize set of invalid character using requestPathInvalidChars, under httpruntime element. This may be the good news for someone who needs to use some above character in their application which was invalid in previous versions. You can find further detail about new ASP.NET features about URL at here           Note that the above new ASP.NET settings will not effect http.sys. This means that you have pass the restriction of http.sys before ASP.NET ever come in to the action. Note also that previous restriction of http.sys is applied on individual path and maxRequestPathLength is applied on the complete path (the portion of the URL that does not include protocol, server name, and query string). For example, if URL is http://a/b/c/d?e=f, then maxRequestPathLength will takes, a/b/c/d, into account while http.sys will take a, b, c individually.   Summary:           Hopefully this will helps you to know how some of initial security features comes in to play, but i also recommend that you should read (at least first chapter called Initial Phases of a Web Request of) Professional ASP.NET 2.0 Security, Membership, and Role Management by Stefan Schackow. This is really a nice book.

  Read the article

• How to subscribe to the free Oracle Linux errata yum repositories

  - by Lenz Grimmer

  Now that updates and errata for Oracle Linux are available for free (both as in beer and freedom), here's a quick HOWTO on how to subscribe your Oracle Linux system to the newly added yum repositories on our public yum server, assuming that you just installed Oracle Linux from scratch, e.g. by using the installation media (ISO images) available from the Oracle Software Delivery Cloud You need to download the appropriate yum repository configuration file from the public yum server and install it in the yum repository directory. For Oracle Linux 6, the process would look as follows: as the root user, run the following command: [root@oraclelinux62 ~]# wget http://public-yum.oracle.com/public-yum-ol6.repo \ -P /etc/yum.repos.d/ --2012-03-23 00:18:25-- http://public-yum.oracle.com/public-yum-ol6.repo Resolving public-yum.oracle.com... 141.146.44.34 Connecting to public-yum.oracle.com|141.146.44.34|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1461 (1.4K) [text/plain] Saving to: “/etc/yum.repos.d/public-yum-ol6.repo” 100%[=================================================>] 1,461 --.-K/s in 0s 2012-03-23 00:18:26 (37.1 MB/s) - “/etc/yum.repos.d/public-yum-ol6.repo” saved [1461/1461] For Oracle Linux 5, the file name would be public-yum-ol5.repo in the URL above instead. The "_latest" repositories that contain the errata packages are already enabled by default — you can simply pull in all available updates by running "yum update" next: [root@oraclelinux62 ~]# yum update Loaded plugins: refresh-packagekit, security ol6_latest | 1.1 kB 00:00 ol6_latest/primary | 15 MB 00:42 ol6_latest 14643/14643 Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package at.x86_64 0:3.1.10-43.el6 will be updated ---> Package at.x86_64 0:3.1.10-43.el6_2.1 will be an update ---> Package autofs.x86_64 1:5.0.5-39.el6 will be updated ---> Package autofs.x86_64 1:5.0.5-39.el6_2.1 will be an update ---> Package bind-libs.x86_64 32:9.7.3-8.P3.el6 will be updated ---> Package bind-libs.x86_64 32:9.7.3-8.P3.el6_2.2 will be an update ---> Package bind-utils.x86_64 32:9.7.3-8.P3.el6 will be updated ---> Package bind-utils.x86_64 32:9.7.3-8.P3.el6_2.2 will be an update ---> Package cvs.x86_64 0:1.11.23-11.el6_0.1 will be updated ---> Package cvs.x86_64 0:1.11.23-11.el6_2.1 will be an update [...] ---> Package yum.noarch 0:3.2.29-22.0.1.el6 will be updated ---> Package yum.noarch 0:3.2.29-22.0.2.el6_2.2 will be an update ---> Package yum-plugin-security.noarch 0:1.1.30-10.el6 will be updated ---> Package yum-plugin-security.noarch 0:1.1.30-10.0.1.el6 will be an update ---> Package yum-utils.noarch 0:1.1.30-10.el6 will be updated ---> Package yum-utils.noarch 0:1.1.30-10.0.1.el6 will be an update --> Finished Dependency Resolution Dependencies Resolved ===================================================================================== Package Arch Version Repository Size ===================================================================================== Installing: kernel x86_64 2.6.32-220.7.1.el6 ol6_latest 24 M kernel-uek x86_64 2.6.32-300.11.1.el6uek ol6_latest 21 M kernel-uek-devel x86_64 2.6.32-300.11.1.el6uek ol6_latest 6.3 M Updating: at x86_64 3.1.10-43.el6_2.1 ol6_latest 60 k autofs x86_64 1:5.0.5-39.el6_2.1 ol6_latest 470 k bind-libs x86_64 32:9.7.3-8.P3.el6_2.2 ol6_latest 839 k bind-utils x86_64 32:9.7.3-8.P3.el6_2.2 ol6_latest 178 k cvs x86_64 1.11.23-11.el6_2.1 ol6_latest 711 k [...] xulrunner x86_64 10.0.3-1.0.1.el6_2 ol6_latest 12 M yelp x86_64 2.28.1-13.el6_2 ol6_latest 778 k yum noarch 3.2.29-22.0.2.el6_2.2 ol6_latest 987 k yum-plugin-security noarch 1.1.30-10.0.1.el6 ol6_latest 36 k yum-utils noarch 1.1.30-10.0.1.el6 ol6_latest 94 k Transaction Summary ===================================================================================== Install 3 Package(s) Upgrade 96 Package(s) Total download size: 173 M Is this ok [y/N]: y Downloading Packages: (1/99): at-3.1.10-43.el6_2.1.x86_64.rpm | 60 kB 00:00 (2/99): autofs-5.0.5-39.el6_2.1.x86_64.rpm | 470 kB 00:01 (3/99): bind-libs-9.7.3-8.P3.el6_2.2.x86_64.rpm | 839 kB 00:02 (4/99): bind-utils-9.7.3-8.P3.el6_2.2.x86_64.rpm | 178 kB 00:00 [...] (96/99): yelp-2.28.1-13.el6_2.x86_64.rpm | 778 kB 00:02 (97/99): yum-3.2.29-22.0.2.el6_2.2.noarch.rpm | 987 kB 00:03 (98/99): yum-plugin-security-1.1.30-10.0.1.el6.noarch.rpm | 36 kB 00:00 (99/99): yum-utils-1.1.30-10.0.1.el6.noarch.rpm | 94 kB 00:00 ------------------------------------------------------------------------------------- Total 306 kB/s | 173 MB 09:38 warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY Retrieving key from http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 Importing GPG key 0xEC551F03: Userid: "Oracle OSS group (Open Source Software group) " From : http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 Is this ok [y/N]: y Running rpm_check_debug Running Transaction Test Transaction Test Succeeded Running Transaction Updating : yum-3.2.29-22.0.2.el6_2.2.noarch 1/195 Updating : xorg-x11-server-common-1.10.4-6.el6_2.3.x86_64 2/195 Updating : kernel-uek-headers-2.6.32-300.11.1.el6uek.x86_64 3/195 Updating : 12:dhcp-common-4.1.1-25.P1.el6_2.1.x86_64 4/195 Updating : tzdata-java-2011n-2.el6.noarch 5/195 Updating : tzdata-2011n-2.el6.noarch 6/195 Updating : glibc-common-2.12-1.47.el6_2.9.x86_64 7/195 Updating : glibc-2.12-1.47.el6_2.9.x86_64 8/195 [...] Cleanup : kernel-firmware-2.6.32-220.el6.noarch 191/195 Cleanup : kernel-uek-firmware-2.6.32-300.3.1.el6uek.noarch 192/195 Cleanup : glibc-common-2.12-1.47.el6.x86_64 193/195 Cleanup : glibc-2.12-1.47.el6.x86_64 194/195 Cleanup : tzdata-2011l-4.el6.noarch 195/195 Installed: kernel.x86_64 0:2.6.32-220.7.1.el6 kernel-uek.x86_64 0:2.6.32-300.11.1.el6uek kernel-uek-devel.x86_64 0:2.6.32-300.11.1.el6uek Updated: at.x86_64 0:3.1.10-43.el6_2.1 autofs.x86_64 1:5.0.5-39.el6_2.1 bind-libs.x86_64 32:9.7.3-8.P3.el6_2.2 bind-utils.x86_64 32:9.7.3-8.P3.el6_2.2 cvs.x86_64 0:1.11.23-11.el6_2.1 dhclient.x86_64 12:4.1.1-25.P1.el6_2.1 [...] xorg-x11-server-common.x86_64 0:1.10.4-6.el6_2.3 xulrunner.x86_64 0:10.0.3-1.0.1.el6_2 yelp.x86_64 0:2.28.1-13.el6_2 yum.noarch 0:3.2.29-22.0.2.el6_2.2 yum-plugin-security.noarch 0:1.1.30-10.0.1.el6 yum-utils.noarch 0:1.1.30-10.0.1.el6 Complete! At this point, your system is fully up to date. As the kernel was updated as well, a reboot is the recommended next action. If you want to install the latest release of the Unbreakable Enterprise Kernel Release 2 as well, you need to edit the .repo file and enable the respective yum repository (e.g. "ol6_UEK_latest" for Oracle Linux 6 and "ol5_UEK_latest" for Oracle Linux 5) manually, by setting enabled to "1". The next yum update run will download and install the second release of the Unbreakable Enterprise Kernel, which will be enabled after the next reboot. -Lenz

  Read the article

• Convert a DVD Movie Directly to AVI with FairUse Wizard 2.9

  - by DigitalGeekery

  Are you looking for a way to backup your DVD movie collection to AVI?  Today we’ll show you how to rip a DVD movie directly to AVI with FairUse Wizard. About FairUse Wizard FairUse Wizard 2.9 uses the DivX, Xvid, or h.264 codec to convert DVD to an AVI file. It comes in both a free version and commercial version. The free, or “Light” version, can create files up 700MB while the commercial version can output a 1400MB file. This will allow you to back up your movies to CD, or even multiple movies on a single DVD. FairUse Wizard states that it does not work on copy protected discs, but we’ve seen it work on all but some of the most recent copy protection. For this tutorial we’re using the free Light Edition to convert a DVD to AVI. They also offer a commercial version that you can get for $29.99 and it offers even more encoding possibilities for converting video to you portable digital devices. Installation and Configuration Download and install FairUse Wizard. (Download link below). Once the install is complete, open FairUse Wizard by going to Start > All Programs >  FairUse Wizard 2 >  FairUse Wizard 2.   FairUse Wizard will open on the new project screen. Select “Create a new project” and type a project name into the text box. This will be used as the file output name.  Ex: A project name of Simpsons Movie will give you an output file of Simpsons Movie.avi.   Next, browse for a destination folder for the output file and temp files. Note that you will need a minimum of 6 GB of free disk space for the conversion process. Note: Much of that 6 GB will be used for temporary files that we will delete after the conversion process.   Click on the Options button at the bottom.   Under Preferences, choose your preferred video codec and file output size. XviD and x264 are installed by default. If you prefer to use DivX, you will have to install it separately. Also note the “Two pass” option. Checking the “Two pass” box will encode your video twice for higher quality, but will take more time. Un-checking the box will speed up the conversion process.   Under Audio track, note that English subtitles are enabled by default, so to remove the subtitles, you will need to change the dropdown list so it shows only a dash (-). You can also select “Use TV Mode” if your primary playback will be on a 4:3 TV screen. Click “Next.” Full Auto Mode vs. Manual Mode You should now be back to the initial screen. Next, we’ll need to determine whether or not we can use “Full Auto Mode” to convert the movie. The difference is that “Full Auto Mode” will automatically perform a few steps that you will otherwise have to do manually. If you choose the “Full Auto Mode” option, FairUse Wizard will look for the video on the DVD with the longest duration and assume it is the chain that it should convert to AVI. It’s possible, however, your disc may contain a few chains of similar size, such as a theatrical cut and director’s cut, and the longest chain may not be the one you wish to convert. Make sure that “Full auto mode” is not checked yet, and click “Next.”   FairUse Wizard will parse the IFO files and display all video chains longer than 60  seconds. In most cases, you will only find that the largest chain is the one closely matching the duration of the movie. In these instances, you can use “Full Auto Mode.” If you find more than one chain that are close in duration to the length of the movie, consult the literature on the DVD case, or search online, to find the actual running time of the movie. If the proper file chain is not the longest chain, you won’t be able to use “Full Auto Mode.”   Full Auto Mode To use “Full Auto Mode,” simply click the “Back” button to return to the initial screen Now, place a check in the “Full auto mode” check box. Click “Next.” You will then be prompted to chose your DVD drive, then click “OK.” FairUse Wizard will parse the IFO files… … and then prompt you to Select your drive that contains the DVD one more time before beginning the conversion process. Click “OK.”   Manual Mode If you cannot (or don’t wish to) use Full Auto Mode, choose the appropriate video chain and click “Next.” FairUse Wizard will first go through the process of indexing the video. Note: If you get a runtime error during this portion of the process, it likely means that FairUse Wizard cannot handle the copy protection, and thus cannot convert the DVD. FairUse Wizard will automatically detect a cropping region. If necessary, you can edit the cropping region by adjusting the cropping region settings to the left. Click “Next.” Next, click “Auto Detect” to choose the proper field combination. Click “OK” on the pop up window that displays your Field Mode. Then click “Next.” This next screen is mainly comprised of settings from the Options screen. You can make changes at this point such as codec or output size. Click “Next” when ready.   Video Conversion Now the video conversion process will begin. This may take a few hours depending on your system’s hardware. Note: There is a check box to “Shutdown computer when done” if you choose to run the conversion overnight or before leaving for work. The first phase will be video encoding… Then the audio… If you chose the “Two Pass” option, your video video will be encoded again on 2nd pass. Then you’re finished. Unfortunately, FairUse Wizard doesn’t clean up after itself very well. After the process is complete, you’ll want to browse to your output directory and delete all the temporary files as they take up a considerable amount of hard drive space. Now you’re ready to enjoy your movie. Conclusion FairUse Wizard is a nice way to backup your DVD movies to good quality .avi files. You can store them on your hard drive, watch them on a media PC, or burn them to disc. Many DVD players even allow for playback of DivX or XviD encoded video from a CD or DVD. For those of you with children, you can burn that AVI file to CD for your kids, and keep your original DVDs stored safely out of harms way. Download Download FairUse Wizard 2.9 LE Similar Articles Productive Geek Tips Kantaris is a Unique Media Player Based on VLCHow to Make/Edit a movie with Windows Movie Maker in Windows VistaAutomatically Mount and View ISO files in Windows 7 Media CenterTune Your ClearType Font Settings in Windows VistaAdd Images and Metadata to Windows 7 Media Center Movie Library TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

  Read the article

• Redirect network logs from syslog to another file

  - by w0rldart

  I keep logging way to much info (not needed, for now) in my syslog, and not daily or hourly... but instant. If I want to watch for something in my syslog I just can't because the network log keeps interfering. So, how can I redirect network logs to another file and/or stop logging it? Dec 10 17:01:33 user kernel: [ 8716.000587] MediaState is connected Dec 10 17:01:33 user kernel: [ 8716.000599] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:33 user kernel: [ 8716.000601] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:33 user kernel: [ 8716.000612] rt28xx_get_wireless_stats ---> Dec 10 17:01:33 user kernel: [ 8716.000615] <--- rt28xx_get_wireless_stats Dec 10 17:01:39 user kernel: [ 8722.000714] MediaState is connected Dec 10 17:01:39 user kernel: [ 8722.000729] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:39 user kernel: [ 8722.000732] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:39 user kernel: [ 8722.000747] rt28xx_get_wireless_stats ---> Dec 10 17:01:39 user kernel: [ 8722.000751] <--- rt28xx_get_wireless_stats Dec 10 17:01:44 user kernel: [ 8726.904025] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:01:45 user kernel: [ 8728.003138] MediaState is connected Dec 10 17:01:45 user kernel: [ 8728.003153] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:45 user kernel: [ 8728.003157] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:45 user kernel: [ 8728.003171] rt28xx_get_wireless_stats ---> Dec 10 17:01:45 user kernel: [ 8728.003175] <--- rt28xx_get_wireless_stats Dec 10 17:01:51 user kernel: [ 8734.004066] MediaState is connected Dec 10 17:01:51 user kernel: [ 8734.004079] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:51 user kernel: [ 8734.004082] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:51 user kernel: [ 8734.004096] rt28xx_get_wireless_stats ---> Dec 10 17:01:51 user kernel: [ 8734.004099] <--- rt28xx_get_wireless_stats Dec 10 17:01:57 user kernel: [ 8740.004108] MediaState is connected Dec 10 17:01:57 user kernel: [ 8740.004119] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:57 user kernel: [ 8740.004121] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:57 user kernel: [ 8740.004132] rt28xx_get_wireless_stats ---> Dec 10 17:01:57 user kernel: [ 8740.004135] <--- rt28xx_get_wireless_stats Dec 10 17:01:57 user kernel: [ 8740.436021] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:03 user kernel: [ 8746.005280] MediaState is connected Dec 10 17:02:03 user kernel: [ 8746.005294] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:03 user kernel: [ 8746.005298] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:03 user kernel: [ 8746.005312] rt28xx_get_wireless_stats ---> Dec 10 17:02:03 user kernel: [ 8746.005315] <--- rt28xx_get_wireless_stats Dec 10 17:02:09 user kernel: [ 8752.004790] MediaState is connected Dec 10 17:02:09 user kernel: [ 8752.004804] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:09 user kernel: [ 8752.004808] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:09 user kernel: [ 8752.004821] rt28xx_get_wireless_stats ---> Dec 10 17:02:09 user kernel: [ 8752.004825] <--- rt28xx_get_wireless_stats Dec 10 17:02:15 user kernel: [ 8757.984031] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:15 user kernel: [ 8758.004078] MediaState is connected Dec 10 17:02:15 user kernel: [ 8758.004094] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:15 user kernel: [ 8758.004097] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:15 user kernel: [ 8758.004112] rt28xx_get_wireless_stats ---> Dec 10 17:02:15 user kernel: [ 8758.004116] <--- rt28xx_get_wireless_stats Dec 10 17:02:16 user kernel: [ 8759.492017] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:19 user kernel: [ 8762.002179] SCANNING, suspend MSDU transmission ... Dec 10 17:02:19 user kernel: [ 8762.004291] MlmeScanReqAction -- Send PSM Data frame for off channel RM, SCAN_IN_PROGRESS=1! Dec 10 17:02:19 user kernel: [ 8762.025055] SYNC - BBP R4 to 20MHz.l Dec 10 17:02:19 user kernel: [ 8762.027249] RT35xx: SwitchChannel#1(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF1, K=0x02, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.170206] RT35xx: SwitchChannel#2(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF1, K=0x07, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.318211] RT35xx: SwitchChannel#3(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF2, K=0x02, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.462269] RT35xx: SwitchChannel#4(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF2, K=0x07, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.606229] RT35xx: SwitchChannel#5(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF3, K=0x02, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.750202] RT35xx: SwitchChannel#6(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF3, K=0x07, R=0x02 Dec 10 17:02:20 user kernel: [ 8762.894217] RT35xx: SwitchChannel#7(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF4, K=0x02, R=0x02 Dec 10 17:02:20 user kernel: [ 8763.038202] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:20 user kernel: [ 8763.040194] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:20 user kernel: [ 8763.040199] BAR(1) : Tid (0) - 03a3:037e Dec 10 17:02:20 user kernel: [ 8763.040387] SYNC - End of SCAN, restore to channel 11, Total BSS[03] Dec 10 17:02:20 user kernel: [ 8763.040400] ScanNextChannel -- Send PSM Data frame Dec 10 17:02:20 user kernel: [ 8763.040402] bFastRoamingScan ~~~~~~~~~~~~~ Get back to send data ~~~~~~~~~~~~~ Dec 10 17:02:20 user kernel: [ 8763.040405] SCAN done, resume MSDU transmission ... Dec 10 17:02:20 user kernel: [ 8763.047022] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:20 user kernel: [ 8763.047026] BAR(1) : Tid (0) - 03a3:03a5 Dec 10 17:02:21 user kernel: [ 8763.898130] bImprovedScan ............. Resume for bImprovedScan, SCAN_PENDING .............. Dec 10 17:02:21 user kernel: [ 8763.898143] SCANNING, suspend MSDU transmission ... Dec 10 17:02:21 user kernel: [ 8763.900245] MlmeScanReqAction -- Send PSM Data frame for off channel RM, SCAN_IN_PROGRESS=1! Dec 10 17:02:21 user kernel: [ 8763.921144] SYNC - BBP R4 to 20MHz.l Dec 10 17:02:21 user kernel: [ 8763.923339] RT35xx: SwitchChannel#8(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF4, K=0x07, R=0x02 Dec 10 17:02:21 user kernel: [ 8763.996019] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:21 user kernel: [ 8764.066221] RT35xx: SwitchChannel#9(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF5, K=0x02, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.210212] RT35xx: SwitchChannel#10(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF5, K=0x07, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.215536] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.215542] BAR(1) : Tid (0) - 0457:0452 Dec 10 17:02:21 user kernel: [ 8764.244000] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.244004] BAR(1) : Tid (0) - 0459:0456 Dec 10 17:02:21 user kernel: [ 8764.253019] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.253023] BAR(1) : Tid (0) - 045c:0458 Dec 10 17:02:21 user kernel: [ 8764.256677] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.256681] BAR(1) : Tid (0) - 045c:045b Dec 10 17:02:21 user kernel: [ 8764.259785] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.259788] BAR(1) : Tid (0) - 045d:045b Dec 10 17:02:21 user kernel: [ 8764.280467] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.280471] BAR(1) : Tid (0) - 045f:045c Dec 10 17:02:21 user kernel: [ 8764.282189] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.282192] BAR(1) : Tid (0) - 045f:045e Dec 10 17:02:21 user kernel: [ 8764.354204] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.356408] ScanNextChannel():Send PWA NullData frame to notify the associated AP! Dec 10 17:02:21 user kernel: [ 8764.498202] RT35xx: SwitchChannel#12(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x07, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.642210] RT35xx: SwitchChannel#13(RF=8, Pwr0=30, Pwr1=28, 2T), N=0xF7, K=0x02, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.790229] RT35xx: SwitchChannel#14(RF=8, Pwr0=30, Pwr1=28, 2T), N=0xF8, K=0x04, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.934238] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.935243] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:22 user kernel: [ 8764.935249] BAR(1) : Tid (0) - 048e:0485 Dec 10 17:02:22 user kernel: [ 8764.936423] SYNC - End of SCAN, restore to channel 11, Total BSS[05] Dec 10 17:02:22 user kernel: [ 8764.936436] ScanNextChannel -- Send PSM Data frame Dec 10 17:02:22 user kernel: [ 8764.936440] SCAN done, resume MSDU transmission ... Dec 10 17:02:22 user kernel: [ 8764.940529] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.942178] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:22 user kernel: [ 8764.942182] BAR(1) : Tid (0) - 0493:048e Dec 10 17:02:22 user kernel: [ 8764.942715] CNTL - All roaming failed, restore to channel 11, Total BSS[05] Dec 10 17:02:22 user kernel: [ 8764.948016] MMCHK - No BEACON. restore R66 to the low bound(56) Dec 10 17:02:22 user kernel: [ 8764.948307] ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 1111 Dec 10 17:02:23 user kernel: [ 8766.048073] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:23 user kernel: [ 8766.552034] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:27 user kernel: [ 8770.001180] MediaState is connected Dec 10 17:02:27 user kernel: [ 8770.001197] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:27 user kernel: [ 8770.001201] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:27 user kernel: [ 8770.001219] rt28xx_get_wireless_stats ---> Dec 10 17:02:27 user kernel: [ 8770.001223] <--- rt28xx_get_wireless_stats Dec 10 17:02:28 user kernel: [ 8771.564020] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:29 user kernel: [ 8772.064031] QuickDRS: TxTotalCnt <= 15, train back to original rate

  Read the article

• Preserving Permalinks

  - by Daniel Moth

  One of the things that gets me on a rant is websites that break permalinks. If you have posted something somewhere and there is a public URL pointing to it, that URL should never ever return a 404. You are breaking all websites that ever linked to you and you are breaking all search engine links to your content (that others will try and follow). It is a pet peeve of mine. So when I had to move my blog, obviously I would preserve the root URL (www.danielmoth.com/Blog/), but I also wanted to preserve every URL my blog has generated over the years. To be clear, our focus here is on the URL formatting, not the content migration which I'll talk about in my next post. In this post, I'll describe my solution first and then what it solves. 1. The IIS7 Rewrite Module and web.config There are a few ways you can map an old URL to a new one (so when requests to the old URL come in, they get redirected to the new one). The new blog engine I use (dasBlog) has built-in functionality to do that (Scott refers to it here). Instead, the way I chose to address the issue was to use the IIS7 rewrite module. The IIS7 rewrite module allows redirecting URLs based on pattern matching, regular expressions and, of course, hardcoded full URLs for things that don't fall into any pattern. You can configure it visually from IIS Manager using a handy dialog that allows testing patterns against input URLs. Here is what mine looked like after configuring a few rules: To learn more about this technology check out this video, the reference page and this overview blog post; all 3 pages have a collection of related resources at the bottom worth checking out too. All the visual configuration ends up in a web.config file at the root folder of your website. If you are on a shared hosting service, probably the only way you can use the Rewrite Module is by directly editing the web.config file. Next, I'll describe the URLs I had to map and how that manifested itself in the web.config file. What I did was create the rules locally using the GUI, and then took the generated web.config file and uploaded it to my live site. You can view my web.config here. 2. Monthly Archives Observe the difference between the way the two blog engines generate this type of URL Blogger: /Blog/2004_07_01_mothblog_archive.html dasBlog: /Blog/default,month,2004-07.aspx In my web.config file, the rule that deals with this is the one named "monthlyarchive_redirect". 3. Categories Observe the difference between the way the two blog engines generate this type of URL Blogger: /Blog/labels/Personal.html dasBlog: /Blog/CategoryView,category,Personal.aspx In my web.config file the rule that deals with this is the one named "category_redirect". 4. Posts Observe the difference between the way the two blog engines generate this type of URL Blogger: /Blog/2004/07/hello-world.html dasBlog: /Blog/Hello-World.aspx In my web.config file the rule that deals with this is the one named "post_redirect". Note: The decision is taken to use dasBlog URLs that do not include the date info (see the description of my Appearance settings). If we included the date info then it would have to include the day part, which blogger did not generate. This makes it impossible to redirect correctly and to have a single permalink for blog posts moving forward. An implication of this decision, is that no two blog posts can have the same title. The tool I will describe in my next post (inelegantly) deals with duplicates, but not with triplicates or higher. 5. Unhandled by a generic rule Unfortunately, the two blog engines use different rules for generating URLs for blog posts. Most of the time the conversion is as simple as the example of the previous section where a post titled "Hello World" generates a URL with the words separated by a hyphen. Some times that is not the case, for example: /Blog/2006/05/medc-wrap-up.html /Blog/MEDC-Wrapup.aspx or /Blog/2005/01/best-of-moth-2004.html /Blog/Best-Of-The-Moth-2004.aspx or /Blog/2004/11/more-windows-mobile-2005-details.html /Blog/More-Windows-Mobile-2005-Details-Emerge.aspx In short, blogger does not add words to the title beyond ~39 characters, it drops some words from the title generation (e.g. a, an, on, the), and it preserve hyphens that appear in the title. For this reason, we need to detect these and explicitly list them for redirects (no regular expression can help here because the full set of rules is not listed anywhere). In my web.config file the rule that deals with this is the one named "Redirect rule1 for FullRedirects" combined with the rewriteMap named "StaticRedirects". Note: The tool I describe in my next post will detect all the URLs that need to be explicitly redirected and will list them in a file ready for you to copy them to your web.config rewriteMap. 6. C# code doing the same as the web.config I wrote some naive code that does the same thing as the web.config: given a string it will return a new string converted according to the 3 rules above. It does not take into account the 4th case where an explicit hard-coded conversion is needed (the tool I present in the next post does take that into account). static string REGEX_post_redirect = "[0-9]{4}/[0-9]{2}/([0-9a-z-]+).html"; static string REGEX_category_redirect = "labels/([_0-9a-z-% ]+).html"; static string REGEX_monthlyarchive_redirect = "([0-9]{4})_([0-9]{2})_[0-9]{2}_mothblog_archive.html"; static string Redirect(string oldUrl) { GroupCollection g; if (RunRegExOnIt(oldUrl, REGEX_post_redirect, 2, out g)) return string.Concat(g[1].Value, ".aspx"); if (RunRegExOnIt(oldUrl, REGEX_category_redirect, 2, out g)) return string.Concat("CategoryView,category,", g[1].Value, ".aspx"); if (RunRegExOnIt(oldUrl, REGEX_monthlyarchive_redirect, 3, out g)) return string.Concat("default,month,", g[1].Value, "-", g[2], ".aspx"); return string.Empty; } static bool RunRegExOnIt(string toRegEx, string pattern, int groupCount, out GroupCollection g) { if (pattern.Length == 0) { g = null; return false; } g = new Regex(pattern, RegexOptions.IgnoreCase | RegexOptions.Compiled).Match(toRegEx).Groups; return (g.Count == groupCount); } Comments about this post welcome at the original blog.

  Read the article

• Validating a linked item&rsquo;s data template in Sitecore

  - by Kyle Burns

  I’ve been doing quite a bit of work in Sitecore recently and last week I encountered a situation that it appears many others have hit.  I was working with a field that had been configured originally as a grouped droplink, but now needed to be updated to support additional levels of hierarchy in the folder structure.  If you’ve done any work in Sitecore that statement makes sense, but if not it may seem a bit cryptic.  Sitecore offers a number of different field types and a subset of these field types focus on providing links either to other items on the content tree or to content that is not stored in Sitecore.  In the case of the grouped droplink, the field is configured with a “root” folder and each direct descendant of this folder is considered to be a header for a grouping of other items and displayed in a dropdown.  A picture is worth a thousand words, so consider the following piece of a content tree: If I configure a grouped droplink field to use the “Current” folder as its datasource, the control that gets to my content author looks like this: This presents a nicely organized display and limits the user to selecting only the direct grandchildren of the folder root.  It also presents the limitation that struck as we were thinking through the content architecture and how it would hold up over time – the authors cannot further organize content under the root folder because of the structure required for the dropdown to work.  Over time, not allowing the hierarchy to go any deeper would prevent out authors from being able to organize their content in a way that it would be found when needed, so the grouped droplink data type was not going to fit the bill. I needed to look for an alternative data type that allowed for selection of a single item and limited my choices to descendants of a specific node on the content tree.  After looking at the options available for links in Sitecore and considering them against each other, one option stood out as nearly perfect – the droptree.  This field type stores its data identically to the droplink and allows for the selection of zero or one items under a specific node in the content tree.  By changing my data template to use droptree instead of grouped droplink, the author is now presented with the following when selecting a linked item: Sounds great, but a did say almost perfect – there’s still one flaw.  The code intended to display the linked item is expecting the selection to use a specific data template (or more precisely it makes certain assumptions about the fields that will be present), but the droptree does nothing to prevent the author from selecting a folder (since folders are items too) instead of one of the items contained within a folder.  I looked to see if anyone had already solved this problem.  I found many people discussing the problem, but the closest that I found to a solution was the statement “the best thing would probably be to create a custom validator” with no further discussion in regards to what this validator might look like.  I needed to create my own validator to ensure that the user had not selected a folder.  Since so many people had the same issue, I decided to make the validator as reusable as possible and share it here. The validator that I created inherits from StandardValidator.  In order to make the validator more intuitive to developers that are familiar with the TreeList controls in Sitecore, I chose to implement the following parameters: ExcludeTemplatesForSelection – serves as a “deny list”.  If the data template of the selected item is in this list it will not validate IncludeTemplatesForSelection – this can either be empty to indicate that any template not contained in the exclusion list is acceptable or it can contain the list of acceptable templates Now that I’ve explained the parameters and the purpose of the validator, I’ll let the code do the rest of the talking: 1: /// <summary> 2: /// Validates that a link field value meets template requirements 3: /// specified using the following parameters: 4: /// - ExcludeTemplatesForSelection: If present, the item being 5: /// based on an excluded template will cause validation to fail. 6: /// - IncludeTemplatesForSelection: If present, the item not being 7: /// based on an included template will cause validation to fail 8: /// 9: /// ExcludeTemplatesForSelection trumps IncludeTemplatesForSelection 10: /// if the same value appears in both lists. Lists are comma seperated 11: /// </summary> 12: [Serializable] 13: public class LinkItemTemplateValidator : StandardValidator 14: { 15: public LinkItemTemplateValidator() 16: { 17: } 18:   19: /// <summary> 20: /// Serialization constructor is required by the runtime 21: /// </summary> 22: /// <param name="info"></param> 23: /// <param name="context"></param> 24: public LinkItemTemplateValidator(SerializationInfo info, StreamingContext context) : base(info, context) { } 25:   26: /// <summary> 27: /// Returns whether the linked item meets the template 28: /// constraints specified in the parameters 29: /// </summary> 30: /// <returns> 31: /// The result of the evaluation. 32: /// </returns> 33: protected override ValidatorResult Evaluate() 34: { 35: if (string.IsNullOrWhiteSpace(ControlValidationValue)) 36: { 37: return ValidatorResult.Valid; // let "required" validation handle 38: } 39:   40: var excludeString = Parameters["ExcludeTemplatesForSelection"]; 41: var includeString = Parameters["IncludeTemplatesForSelection"]; 42: if (string.IsNullOrWhiteSpace(excludeString) && string.IsNullOrWhiteSpace(includeString)) 43: { 44: return ValidatorResult.Valid; // "allow anything" if no params 45: } 46:   47: Guid linkedItemGuid; 48: if (!Guid.TryParse(ControlValidationValue, out linkedItemGuid)) 49: { 50: return ValidatorResult.Valid; // probably put validator on wrong field 51: } 52:   53: var item = GetItem(); 54: var linkedItem = item.Database.GetItem(new ID(linkedItemGuid)); 55:   56: if (linkedItem == null) 57: { 58: return ValidatorResult.Valid; // this validator isn't for broken links 59: } 60:   61: var exclusionList = (excludeString ?? string.Empty).Split(','); 62: var inclusionList = (includeString ?? string.Empty).Split(','); 63:   64: if ((inclusionList.Length == 0 || inclusionList.Contains(linkedItem.TemplateName)) 65: && !exclusionList.Contains(linkedItem.TemplateName)) 66: { 67: return ValidatorResult.Valid; 68: } 69:   70: Text = GetText("The field \"{0}\" specifies an item which is based on template \"{1}\". This template is not valid for selection", GetFieldDisplayName(), linkedItem.TemplateName); 71:   72: return GetFailedResult(ValidatorResult.FatalError); 73: } 74:   75: protected override ValidatorResult GetMaxValidatorResult() 76: { 77: return ValidatorResult.FatalError; 78: } 79:   80: public override string Name 81: { 82: get { return @"LinkItemTemplateValidator"; } 83: } 84: }   In this blog entry, I have shared some code that I found useful in solving a problem that seemed fairly common.  Hopefully the next person that is looking for this answer finds it useful as well.

  Read the article

• Improving WIF&rsquo;s Claims-based Authorization - Part 2

  - by Your DisplayName here!

  In the last post I showed you how to take control over the invocation of ClaimsAuthorizationManager. Then you have complete freedom over the claim types, the amount of claims and the values. In addition I added two attributes that invoke the authorization manager using an “application claim type”. This way it is very easy to distinguish between authorization calls that originate from WIF’s per-request authorization and the ones from “within” you application. The attribute comes in two flavours: a CAS attribute (invoked by the CLR) and an ASP.NET MVC attribute (for MVC controllers, invoke by the MVC plumbing). Both also feature static methods to easily call them using the application claim types. The CAS attribute is part of Thinktecture.IdentityModel on Codeplex (or via NuGet: Install-Package Thinktecture.IdentityModel). If you really want to see that code ;) There is also a sample included in the Codeplex donwload. The MVC attribute is currently used in Thinktecture.IdentityServer – and I don’t currently plan to make it part of the library project since I don’t want to add a dependency on MVC for now. You can find the code below – and I will write about its usage in a follow-up post. public class ClaimsAuthorize : AuthorizeAttribute {     private string _resource;     private string _action;     private string[] _additionalResources;     /// <summary>     /// Default action claim type.     /// </summary>     public const string ActionType = "http://application/claims/authorization/action";     /// <summary>     /// Default resource claim type     /// </summary>     public const string ResourceType = "http://application/claims/authorization/resource";     /// <summary>     /// Additional resource claim type     /// </summary>     public const string AdditionalResourceType = "http://application/claims/authorization/additionalresource"          public ClaimsAuthorize(string action, string resource, params string[] additionalResources)     {         _action = action;         _resource = resource;         _additionalResources = additionalResources;     }     public static bool CheckAccess(       string action, string resource, params string[] additionalResources)     {         return CheckAccess(             Thread.CurrentPrincipal as IClaimsPrincipal,             action,             resource,             additionalResources);     }     public static bool CheckAccess(       IClaimsPrincipal principal, string action, string resource, params string[] additionalResources)     {         var context = CreateAuthorizationContext(             principal,             action,             resource,             additionalResources);         return ClaimsAuthorization.CheckAccess(context);     }     protected override bool AuthorizeCore(HttpContextBase httpContext)     {         return CheckAccess(_action, _resource, _additionalResources);     }     private static WIF.AuthorizationContext CreateAuthorizationContext(       IClaimsPrincipal principal, string action, string resource, params string[] additionalResources)     {         var actionClaims = new Collection<Claim>         {             new Claim(ActionType, action)         };         var resourceClaims = new Collection<Claim>         {             new Claim(ResourceType, resource)         };         if (additionalResources != null && additionalResources.Length > 0)         {             additionalResources.ToList().ForEach(ar => resourceClaims.Add(               new Claim(AdditionalResourceType, ar)));         }         return new WIF.AuthorizationContext(             principal,             resourceClaims,             actionClaims);     } }

  Read the article

• MVC 3 AdditionalMetadata Attribute with ViewBag to Render Dynamic UI

  - by Steve Michelotti

  A few months ago I blogged about using Model metadata to render a dynamic UI in MVC 2. The scenario in the post was that we might have a view model where the questions are conditionally displayed and therefore a dynamic UI is needed. To recap the previous post, the solution was to use a custom attribute called [QuestionId] in conjunction with an “ApplicableQuestions” collection to identify whether each question should be displayed. This allowed me to have a view model that looked like this: 1: [UIHint("ScalarQuestion")] 2: [DisplayName("First Name")] 3: [QuestionId("NB0021")] 4: public string FirstName { get; set; } 5: 6: [UIHint("ScalarQuestion")] 7: [DisplayName("Last Name")] 8: [QuestionId("NB0022")] 9: public string LastName { get; set; } 10: 11: [UIHint("ScalarQuestion")] 12: [QuestionId("NB0023")] 13: public int Age { get; set; } 14: 15: public IEnumerable<string> ApplicableQuestions { get; set; } At the same time, I was able to avoid repetitive IF statements for every single question in my view: 1: <%: Html.EditorFor(m => m.FirstName, new { applicableQuestions = Model.ApplicableQuestions })%> 2: <%: Html.EditorFor(m => m.LastName, new { applicableQuestions = Model.ApplicableQuestions })%> 3: <%: Html.EditorFor(m => m.Age, new { applicableQuestions = Model.ApplicableQuestions })%> by creating an Editor Template called “ScalarQuestion” that encapsulated the IF statement: 1: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %> 2: <%@ Import Namespace="DynamicQuestions.Models" %> 3: <%@ Import Namespace="System.Linq" %> 4: <% 5: var applicableQuestions = this.ViewData["applicableQuestions"] as IEnumerable<string>; 6: var questionAttr = this.ViewData.ModelMetadata.ContainerType.GetProperty(this.ViewData.ModelMetadata.PropertyName).GetCustomAttributes(typeof(QuestionIdAttribute), true) as QuestionIdAttribute[]; 7: string questionId = null; 8: if (questionAttr.Length > 0) 9: { 10: questionId = questionAttr[0].Id; 11: } 12: if (questionId != null && applicableQuestions.Contains(questionId)) { %> 13: <div> 14: <%: Html.Label("") %> 15: <%: Html.TextBox("", this.Model)%> 16: </div> 17: <% } %> You might want to go back and read the full post in order to get the full context. MVC 3 offers a couple of new features that make this scenario more elegant to implement. The first step is to use the new [AdditionalMetadata] attribute which, so far, appears to be an under appreciated new feature of MVC 3. With this attribute, I don’t need my custom [QuestionId] attribute anymore - now I can just write my view model like this: 1: [UIHint("ScalarQuestion")] 2: [DisplayName("First Name")] 3: [AdditionalMetadata("QuestionId", "NB0021")] 4: public string FirstName { get; set; } 5:   6: [UIHint("ScalarQuestion")] 7: [DisplayName("Last Name")] 8: [AdditionalMetadata("QuestionId", "NB0022")] 9: public string LastName { get; set; } 10:   11: [UIHint("ScalarQuestion")] 12: [AdditionalMetadata("QuestionId", "NB0023")] 13: public int Age { get; set; } Thus far, the documentation seems to be pretty sparse on the AdditionalMetadata attribute. It’s buried in the Other New Features section of the MVC 3 home page and, after showing the attribute on a view model property, it just says, “This metadata is made available to any display or editor template when a product view model is rendered. It is up to you to interpret the metadata information.” But what exactly does it look like for me to “interpret the metadata information”? Well, it turns out it makes the view much easier to work with. Here is the re-implemented ScalarQuestion template updated for MVC 3 and Razor: 1: @{ 2: object questionId; 3: ViewData.ModelMetadata.AdditionalValues.TryGetValue("QuestionId", out questionId); 4: if (ViewBag.applicableQuestions.Contains((string)questionId)) { 5: <div> 6: @Html.LabelFor(m => m) 7: @Html.TextBoxFor(m => m) 8: </div> 9: } 10: } So we’ve gone from 17 lines of code (in the MVC 2 version) to about 7-8 lines of code here. The first thing to notice is that in MVC 3 we now have a property called “AdditionalValues” that hangs off of the ModelMetadata property. This is automatically populated by any [AdditionalMetadata] attributes on the property. There is no more need for me to explicitly write Reflection code to GetCustomAttributes() and then check to see if those attributes were present. I can just call TryGetValue() on the dictionary to see if they were present. Secondly, the “applicableQuestions” anonymous type that I passed in from the calling view – in MVC 3 I now have a dynamic ViewBag property where I can just “dot into” the applicableQuestions with a nicer syntax than dictionary square bracket syntax. And there’s no problems calling the Contains() method on this dynamic object because at runtime the DLR has resolved that it is a generic List<string>. At this point you might be saying that, yes the view got much nicer than the MVC 2 version, but my view model got slightly worse.  In the previous version I had a nice [QuestionId] attribute but now, with the [AdditionalMetadata] attribute, I have to type the string “QuestionId” for every single property and hope that I don’t make a typo. Well, the good news is that it’s easy to create your own attributes that can participate in the metadata’s additional values. The key is that the attribute must implement that IMetadataAware interface and populate the AdditionalValues dictionary in the OnMetadataCreated() method: 1: public class QuestionIdAttribute : Attribute, IMetadataAware 2: { 3: public string Id { get; set; } 4:   5: public QuestionIdAttribute(string id) 6: { 7: this.Id = id; 8: } 9:   10: public void OnMetadataCreated(ModelMetadata metadata) 11: { 12: metadata.AdditionalValues["QuestionId"] = this.Id; 13: } 14: } This now allows me to encapuslate my “QuestionId” string in just one place and get back to my original attribute which can be used like this: [QuestionId(“NB0021”)]. The [AdditionalMetadata] attribute is a powerful and under-appreciated new feature of MVC 3. Combined with the dynamic ViewBag property, you can do some really interesting things with your applications with less code and ceremony.

  Read the article

• Top tweets SOA Partner Community – October 2012

  - by JuergenKress

  Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity SOA Community Deploying Fusion Order Demo on 11.1.1.6 by Antony Reynolds http://wp.me/p10C8u-vA leonsmiers ?Cant wait to test it >> 't waiRT @OracleSOA: Case Management patterns, session coverage from #OOW #OracleBPM #ACM #BPM http://bit.ly/OdcZL6 Danilo Schmiedel Bye bye San Francisco. #oow was a great conference in a wonderful city! Thanks! @soacommunity pic.twitter.com/lcYSe9xC OPITZ CONSULTING ?The Journey towards #Oracle #BPM @OpenWorld 2012 - Slides by @t_winterberg & H. Normann: http://ow.ly/edkWE #oow demed Full house at the SOA Customer Advisory Board! #oow12 http://instagr.am/p/QX9B8eLMLS/ Danilo Schmiedel "@whitehorsesnl: Had some great talks with the BPM guys at the DEMOgrounds. It is one of the best things at #oow" -> I agree!! @soacommunity Mark Simpson ?Fusion Middleware Global Innovation Awards: nice to pick up a soa and bpm with our customer. #oow Mark Simpson ?RT @SOASimone: #oraclesoa #oow hands on lab fully booked pic.twitter.com/pwI94Ew7 <--quick, provision some more compute power on the cloud! Oracle SOA ?Join us for BPM and Analytics: Process Dashboards. BAM, and Intelligent OptimizationMoscone South - 308#OracleBPM #OOW Oracle SOA ?Real-time public safety demo! License plate recognition and processing in London via Oracle Event Processing. #oow pic.twitter.com/WufesDBq Marc ?Nice session on customer success stories on #SOA11g on with @SOASimone Pro and cons and architectural overview. #oow pic.twitter.com/bzuhsujm Lucas Jellema Full length Keynote on Middleware #oow : http://medianetwork.oracle.com/video/player/1873556035001 … #oow_amis OracleBlogs ?Why Fusion Middleware matters to Oracle Applications and Fusion Applications customers? http://ow.ly/2stVQ0 OracleBlogs ?Open World Session - BPM, SOA and ADF Combined:Patterns learned from Fusion Applications http://ow.ly/2suhzf Ronald Luttikhuizen ?VENNSTER BLOG | Presentations at OpenWorld 2012 | http://blog.vennster.nl/2012/10/presentations-at-openworld-2012.html … Andrejus Baranovskis @dschmied @soacommunity next OOW for sure, and may be SOA community event ! @soacommunity Danilo Schmiedel ?@andrejusb Thanks Andrejus - I really enjoyed having a session with you at #oow. When is next time :-) ? @soacommunity Lionel Dubreuil ?@soacommunity #oow12 Today-1:15pm-Marriott Marquis Salon 7 Jump-starting Integration with Oracle Foundation Pack http://bit.ly/QKKJzF Ronald Luttikhuizen ?Impression from our fault handling session in OSB and SOA Suite from the audience @soacommunity @gschmutz #oow pic.twitter.com/WSg1Z89E Marc Nice session on Oracle Virtual Assembly for #SOA11g, @soacommunity Works with #exalogic but not required SOA Community ?Send your #soacommunity #oow pictures and blog posts @soacommunity or http://www.facebook.com/soacommunity Enjoy OOW ;-) Jon petter hjulstad Oracle BPM- Big leap forward in 11.1.1.7 ! Whitehorses ?Common BPM Use Cases from Oracle #bpm #oow pic.twitter.com/ofOv04EF Whitehorses ?Oracle BPM 11.1.1.7 top new features. Interesting #oow #oowbenelux pic.twitter.com/HY9QN5un SOA Community Industrialized SOA - topic of Business Technology Magazine http://wp.me/p10C8u-vi orclateamsoa ?A-Team Blog #ateam: The curious case of SOA Human tasks' automatic completion http://ow.ly/1mq6YU Simone Geib Look for this sign #oow #oraclesoa pic.twitter.com/MJsPV4PO Lucas Jellema My summary of Larry Ellison's keynote at #oow on the AMIS Blog: http://technology.amis.nl/2012/10/01/oow-2012-larry-ellisons-keynote-announcements-exa-cloud-database/ … #oow_amis gschmutz ?Join my #oow session "Five Cool Use Cases for the Spring Component" to see the power of Spring and SOA Suite combined! Moscone 310 - 3:15 PM Ronald Luttikhuizen Thanks to @soacommunity for great SOA/BPM dinner event yesterday night! #oow pic.twitter.com/v7x3i0DC OracleBlogs ?OSB, Service Callouts and OQL http://ow.ly/2sq6B2 OracleBlogs ?Cloud and On-Premises Applications Integration using Oracle Integration Adapters http://ow.ly/2sqiDy OracleBlogs ?Adapters, SOA Suite and More @Openworld 2012 http://ow.ly/2srdTg Eric Elzinga ?OSB, Service Callouts and OQL - Part 3, http://see.sc/JodzEx #oracleservicebus Donatas Valys interesting articles about soa industrialization to read #soa #industrialization http://it-republik.de/business-technology/bt-magazin-ausgaben/Industrialized-SOA-000516.html … gschmutz ?“@techsymp: 2012 Symposium Presentation Download Page Now Available! 75% of presentations published. http://www.servicetechsymposium.com ” find mine there.. Oracle BPM Customer Experience and BPM – From Efficiency to Engagement #bpm #oraclebpm #processmanagement #socialbpm http://pub.vitrue.com/Tahi SOA Community ?@soacommunity SOA Community Newsletter September 2012 http://wp.me/p10C8u-wa SOA Community again again again.... it is Oracle Open World 2012 http://wp.me/p10C8u-wk OracleBlogs ?SOA Proactive support http://ow.ly/2smrSJ demed ?@gschmutz on NoSQL at @techsymp http://lockerz.com/s/247601661 demed ?Just finished "#BigData and its impact on #SOA" talk @techsymp. Really enjoyed getting out of beaten path. #london #oep http://lockerz.com/s/247636974 OTNArchBeat ?Need help selling SOA to business stakeholders? Give them this free eBook. #soasuite http://pub.vitrue.com/hsQY SOA Community top Tweets SOA Partner Community &ndash; September 2012 http://wp.me/p10C8u-vc SOA Community Move Data into the grid for scalable, predictable response times http://wp.me/p10C8u-vv ServiceTechSymposium ?The September issue of the Service Technology Magazine is now published with six new items! Read them at http://www.servicetechmag.com Marc ?Reviewed @Packt_OracleFMW new book on SOA11g administration! Very good ! http://tinyurl.com/8pzd5ww SOA Community ?BPM Solution Catalogue&ndash;promote your process templates http://wp.me/p10C8u-vt OTNArchBeat ?BPM ADF Task forms: Checking whether the current user is in a BPM Swimlane | @ChrisKarlChan http://pub.vitrue.com/aPMG OTNArchBeat ?Cloud, automation drive new growth in SOA governance market | @JoeMcKendrick http://pub.vitrue.com/hNPv Simon Haslam ?Looking for "oak style"(!) advanced content but you're a middleware specialist? See #ukoug2012 #middlewaresunday http://2012.ukoug.org/default.asp?p=9355 … Simon Haslam ?The #ukoug2012 agenda is "go, go, go!" (as Murray would say!) http://2012.ukoug.org/agendagrid Germán Gazzoni SOA Spezial II verfügbar – Industralized SOA: Die überarbeitete und ergänzte Neuauflage des SOA Spezial Sonderhe... http://bit.ly/PAWwN9 Oracle SOA ?Flip thru new interactive "Oracle SOA Suite eBook-In the Customers Words" #middleware #soa #oraclesoa http://pub.vitrue.com/NzFZ SOA Community Follow SOA Community on Facebook http://www.facebook.com/soacommunity #soacommunity #opn SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA Community twitter,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

  Read the article

• Web Platform Installer bundles for Visual Studio 2010 SP1 - and how you can build your own WebPI bundles

  - by Jon Galloway

  Visual Studio SP1 is  now available via the Web Platform Installer, which means you've got three options: Download the 1.5 GB ISO image Run the 750KB Web Installer (which figures out what you need to download) Install via Web PI Note: I covered some tips for installing VS2010 SP1 last week - including some that apply to all of these, such as removing options you don't use prior to installing the service pack to decrease the installation time and download size. Two Visual Studio 2010 SP1 Web PI packages There are actually two WebPI packages for VS2010 SP1. There's the standard Visual Studio 2010 SP1 package [Web PI link], which includes (quoting ScottGu's post): VS2010 2010 SP1 ASP.NET MVC 3 (runtime + tools support) IIS 7.5 Express SQL Server Compact Edition 4.0 (runtime + tools support) Web Deployment 2.0 The notes on that package sum it up pretty well: Looking for the latest everything? Look no further. This will get you Visual Studio 2010 Service Pack 1 and the RTM releases of ASP.NET MVC 3, IIS 7.5 Express, SQL Server Compact 4.0 with tooling, and Web Deploy 2.0. It's the value meal of Microsoft products. Tell your friends! Note: This bundle includes the Visual Studio 2010 SP1 web installer, which will dynamically determine the appropriate service pack components to download and install. This is typically in the range of 200-500 MB and will take 30-60 minutes to install, depending on your machine configuration. There is also a Visual Studio 2010 SP1 Core package [Web PI link], which only includes only the SP without any of the other goodies (MVC3, IIS Express, etc.). If you're doing any web development, I'd highly recommend the main pack since it the other installs are small, simple installs, but if you're working in another space, you might want the core package. Installing via the Web Platform Installer I generally like to go with the Web PI when possible since it simplifies most software installations due to things like: Smart dependency management - installing apps or tools which have software dependencies will automatically figure out which dependencies you don't have and add them to the list (which you can review before install) Simultaneous download and install - if your install includes more than one package, it will automatically pull the dependencies first and begin installing them while downloading the others Lists the latest downloads - no need to search around, as they're all listed based on a live feed Includes open source applications - a lot of popular open source applications are included as well as Microsoft software and tools No worries about reinstallation - WebPI installations detect what you've got installed, so for instance if you've got MVC 3 installed you don't need to worry about the VS2010 SP1 package install messing anything up In addition to the links I included above, you can install the WebPI from http://www.microsoft.com/web/downloads/platform.aspx, and if you have Web PI installed you can just tap the Windows key and type "Web Platform" to bring it up in the Start search list. You'll see Visual Studio SP1 listed in the spotlight list as shown below. That's the standard package, which includes MVC 3 / IIS 7.5 Express / SQL Compact / Web Deploy. If you just want the core install, you can use the search box in the upper right corner, typing in "Visual Studio SP1" as shown. Core Install: Use Web PI or the Visual Studio Web Installer? I think the big advantage of using Web PI to install VS 2010 SP1 is that it includes the other new bits. If you're going to install the SP1 core, I don't think there's as much advantage to using Web PI, as the Web PI Core install just downloads the Visual Studio Web Installer anyways. I think Web PI makes it a little easier to find the download, but not a lot. The Visual Studio Web Installer checks dependencies, so there's no big advantage there. If you do happen to hit any problems installing Visual Studio SP1 via Web PI, I'd recommend running the Visual Studio Web Installer, then running the Web PI VS 2010 SP1 package to get all the other goodies. I talked to one person who hit some random snag, recommended that, and it worked out. Custom Web Platform Installer bundles You can create links that will launch the Web Platform Installer with a custom list of tools. You can see an example of this by clicking through on the install button at http://asp.net/downloads (cancelling the installation dialog). You'll see this in the address bar: http://www.microsoft.com/web/gallery/install.aspx?appsxml=&appid=MVC3;ASPNET;NETFramework4;SQLExpress;VWD Notice that the appid querystring parameter includes a semicolon delimited list, and you can make your own custom Web PI links with your own desired app list. I can think of a lot of cases where that would be handy: linking to a recommended software configuration from a software project or product, setting up a recommended / documented / supported install list for a software development team or IT shop, etc. For instance, here's a link that installs just VS2010 SP1 Core and the SQL CE tools: http://www.microsoft.com/web/gallery/install.aspx?appsxml=&appid=VS2010SP1Core;SQLCETools Note: If you've already got all or some of the products installed, the display will reflect that. On my dev box which has the full SP1 package, here's what the above link gives me: Here's another example - on a fresh box I created a link to install MVC 3 and the Web Farm Framework (http://www.microsoft.com/web/gallery/install.aspx?appsxml=&appid=MVC3;WebFarmFramework) and got the following items added to the cart: But where do I get the App ID's? Aha, that's the trick. You can link to a list of cool packages, but you need to know the App ID's to link to them. To figure that out, I turned on tracing in Web Platform Installer  (also handy if you're ever having trouble with a WebPI install) and from the trace logs saw that the list of packages is pulled from an XML file: DownloadManager Information: 0 : Loading product xml from: https://go.microsoft.com/?linkid=9763242 DownloadManager Verbose: 0 : Connecting to https://go.microsoft.com/?linkid=9763242 with (partial) headers: Referer: wpi://2.1.0.0/Microsoft Windows NT 6.1.7601 Service Pack 1 If-Modified-Since: Wed, 09 Mar 2011 14:15:27 GMT User-Agent:Platform-Installer/3.0.3.0(Microsoft Windows NT 6.1.7601 Service Pack 1) DownloadManager Information: 0 : https://go.microsoft.com/?linkid=9763242 responded with 302 DownloadManager Information: 0 : Response headers: HTTP/1.1 302 Found Cache-Control: private Content-Length: 175 Content-Type: text/html; charset=utf-8 Expires: Wed, 09 Mar 2011 22:52:28 GMT Location: https://www.microsoft.com/web/webpi/3.0/webproductlist.xml Server: Microsoft-IIS/7.5 X-AspNet-Version: 2.0.50727 X-Powered-By: ASP.NET Date: Wed, 09 Mar 2011 22:53:27 GMT Browsing to https://www.microsoft.com/web/webpi/3.0/webproductlist.xml shows the full list. You can search through that in your browser / text editor if you'd like, open it in Excel as an XML table, etc. Here's a list of the App ID's as of today: SMO SMO32 PHP52ForIISExpress PHP53ForIISExpress StaticContent DefaultDocument DirectoryBrowse HTTPErrors HTTPRedirection ASPNET NETExtensibility ASP CGI ISAPIExtensions ISAPIFilters ServerSideIncludes HTTPLogging LoggingTools RequestMonitor Tracing CustomLogging ODBCLogging BasicAuthentication WindowsAuthentication DigestAuthentication ClientCertificateMappingAuthentication IISClientCertificateMappingAuthentication URLAuthorization RequestFiltering IPSecurity StaticContentCompression DynamicContentCompression IISManagementConsole IISManagementScriptsAndTools ManagementService MetabaseAndIIS6Compatibility WASProcessModel WASNetFxEnvironment WASConfigurationAPI IIS6WPICompatibility IIS6ScriptingTools IIS6ManagementConsole LegacyFTPServer FTPServer WebDAV LegacyFTPManagementConsole FTPExtensibility AdminPack AdvancedLogging WebFarmFrameworkNonLoc ExternalCacheNonLoc WebFarmFramework WebFarmFrameworkv2 WebFarmFrameworkv2_beta ExternalCache ECacheUpdate ARRv1 ARRv2Beta1 ARRv2Beta2 ARRv2RC ARRv2NonLoc ARRv2 ARRv2Update MVC MVCBeta MVCRC1 MVCRC2 DBManager DbManagerUpdate DynamicIPRestrictions DynamicIPRestrictionsUpdate DynamicIPRestrictionsLegacy DynamicIPRestrictionsBeta2 FTPOOB IISPowershellSnapin RemoteManager SEOToolkit VS2008RTM MySQL SQLDriverPHP52IIS SQLDriverPHP53IIS SQLDriverPHP52IISExpress SQLDriverPHP53IISExpress SQLExpress SQLManagementStudio SQLExpressAdv SQLExpressTools UrlRewrite UrlRewrite2 UrlRewrite2NonLoc UrlRewrite2RC UrlRewrite2Beta UrlRewrite10 UrlScan MVC3Installer MVC3 MVC3LocInstaller MVC3Loc MVC2 VWD VWD2010SP1Pack NETFramework4 WebMatrix WebMatrix_v1Refresh IISExpress IISExpress_v1 IIS7 AspWebPagesVS AspWebPagesVS_1_0 Plan9 Plan9Loc WebMatrix_WHP SQLCE SQLCETools SQLCEVSTools SQLCEVSTools_4_0 SQLCEVSToolsInstaller_4_0 SQLCEVSToolsInstallerNew_4_0 SQLCEVSToolsInstallerRepair_EN_4_0 SQLCEVSToolsInstallerRepair_JA_4_0 SQLCEVSToolsInstallerRepair_FR_4_0 SQLCEVSToolsInstallerRepair_DE_4_0 SQLCEVSToolsInstallerRepair_ES_4_0 SQLCEVSToolsInstallerRepair_IT_4_0 SQLCEVSToolsInstallerRepair_RU_4_0 SQLCEVSToolsInstallerRepair_KO_4_0 SQLCEVSToolsInstallerRepair_ZH_CN_4_0 SQLCEVSToolsInstallerRepair_ZH_TW_4_0 VWD2008 WebDAVOOB WDeploy WDeploy_v2 WDeployNoSMO WDeploy11 WinCache52 WinCache53 NETFramework35 WindowsImagingComponent VC9Redist NETFramework20SP2 WindowsInstaller31 PowerShell PowerShellMsu PowerShell2 WindowsInstaller45 FastCGIUpdate FastCGIBackport FastCGIIIS6 IIS51 IIS60 SQLNativeClient SQLNativeClient2008 SQLNativeClient2005 SQLCLRTypes SQLCLRTypes32 SMO_10_1 MySQLConnector PHP52 PHP53 PHPManager VSVWD2010Feature VWD2010WebFeature_0 VWD2010WebFeature_1 VWD2010WebFeature_2 VS2010SP1Prerequisite RIAServicesToolkitMay2010 Silverlight4Toolkit Silverlight4Tools VSLS SSMAMySQL WebsitePanel VS2010SP1Core VS2010SP1Installer VS2010SP1Pack MissingVWDOrVSVWD2010Feature VB2010Beta2Express VCS2010Beta2Express VC2010Beta2Express RIAServicesToolkitApr2010 VS2010Beta1 VS2010RC VS2010Beta2 VS2010Beta2Express VS2k8RTM VSCPP2k8RTM VSVB2k8RTM VSCS2k8RTM VSVWDFeature LegacyWinCache SQLExpress2005 SSMS2005

  Read the article

• Anti-Forgery Request Helpers for ASP.NET MVC and jQuery AJAX

  - by Dixin

  Background To secure websites from cross-site request forgery (CSRF, or XSRF) attack, ASP.NET MVC provides an excellent mechanism: The server prints tokens to cookie and inside the form; When the form is submitted to server, token in cookie and token inside the form are sent in the HTTP request; Server validates the tokens. To print tokens to browser, just invoke HtmlHelper.AntiForgeryToken():<% using (Html.BeginForm()) { %> <%: this.Html.AntiForgeryToken(Constants.AntiForgeryTokenSalt)%> <%-- Other fields. --%> <input type="submit" value="Submit" /> <% } %> This invocation generates a token then writes inside the form:<form action="..." method="post"> <input name="__RequestVerificationToken" type="hidden" value="J56khgCvbE3bVcsCSZkNVuH9Cclm9SSIT/ywruFsXEgmV8CL2eW5C/gGsQUf/YuP" /> <!-- Other fields. --> <input type="submit" value="Submit" /> </form> and also writes into the cookie: __RequestVerificationToken_Lw__= J56khgCvbE3bVcsCSZkNVuH9Cclm9SSIT/ywruFsXEgmV8CL2eW5C/gGsQUf/YuP When the above form is submitted, they are both sent to server. In the server side, [ValidateAntiForgeryToken] attribute is used to specify the controllers or actions to validate them:[HttpPost] [ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public ActionResult Action(/* ... */) { // ... } This is very productive for form scenarios. But recently, when resolving security vulnerabilities for Web products, some problems are encountered. Specify validation on controller (not on each action) The server side problem is, It is expected to declare [ValidateAntiForgeryToken] on controller, but actually it has be to declared on each POST actions. Because POST actions are usually much more then controllers, this is a little crazy Problem Usually a controller contains actions for HTTP GET and actions for HTTP POST requests, and usually validations are expected for HTTP POST requests. So, if the [ValidateAntiForgeryToken] is declared on the controller, the HTTP GET requests become invalid:[ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public class SomeController : Controller // One [ValidateAntiForgeryToken] attribute. { [HttpGet] public ActionResult Index() // Index() cannot work. { // ... } [HttpPost] public ActionResult PostAction1(/* ... */) { // ... } [HttpPost] public ActionResult PostAction2(/* ... */) { // ... } // ... } If browser sends an HTTP GET request by clicking a link: http://Site/Some/Index, validation definitely fails, because no token is provided. So the result is, [ValidateAntiForgeryToken] attribute must be distributed to each POST action:public class SomeController : Controller // Many [ValidateAntiForgeryToken] attributes. { [HttpGet] public ActionResult Index() // Works. { // ... } [HttpPost] [ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public ActionResult PostAction1(/* ... */) { // ... } [HttpPost] [ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public ActionResult PostAction2(/* ... */) { // ... } // ... } This is a little bit crazy, because one application can have a lot of POST actions. Solution To avoid a large number of [ValidateAntiForgeryToken] attributes (one for each POST action), the following ValidateAntiForgeryTokenAttribute wrapper class can be helpful, where HTTP verbs can be specified:[AttributeUsage(AttributeTargets.Class | AttributeTargets.Method, AllowMultiple = false, Inherited = true)] public class ValidateAntiForgeryTokenWrapperAttribute : FilterAttribute, IAuthorizationFilter { private readonly ValidateAntiForgeryTokenAttribute _validator; private readonly AcceptVerbsAttribute _verbs; public ValidateAntiForgeryTokenWrapperAttribute(HttpVerbs verbs) : this(verbs, null) { } public ValidateAntiForgeryTokenWrapperAttribute(HttpVerbs verbs, string salt) { this._verbs = new AcceptVerbsAttribute(verbs); this._validator = new ValidateAntiForgeryTokenAttribute() { Salt = salt }; } public void OnAuthorization(AuthorizationContext filterContext) { string httpMethodOverride = filterContext.HttpContext.Request.GetHttpMethodOverride(); if (this._verbs.Verbs.Contains(httpMethodOverride, StringComparer.OrdinalIgnoreCase)) { this._validator.OnAuthorization(filterContext); } } } When this attribute is declared on controller, only HTTP requests with the specified verbs are validated:[ValidateAntiForgeryTokenWrapper(HttpVerbs.Post, Constants.AntiForgeryTokenSalt)] public class SomeController : Controller { // GET actions are not affected. // Only HTTP POST requests are validated. } Now one single attribute on controller turns on validation for all POST actions. Maybe it would be nice if HTTP verbs can be specified on the built-in [ValidateAntiForgeryToken] attribute, which is easy to implemented. Submit token via AJAX The browser side problem is, if server side turns on anti-forgery validation for POST, then AJAX POST requests will fail be default. Problem For AJAX scenarios, when request is sent by jQuery instead of form:$.post(url, { productName: "Tofu", categoryId: 1 // Token is not posted. }, callback); This kind of AJAX POST requests will always be invalid, because server side code cannot see the token in the posted data. Solution The tokens are printed to browser then sent back to server. So first of all, HtmlHelper.AntiForgeryToken() must be called somewhere. Now the browser has token in HTML and cookie. Then jQuery must find the printed token in the HTML, and append token to the data before sending:$.post(url, { productName: "Tofu", categoryId: 1, __RequestVerificationToken: getToken() // Token is posted. }, callback); To be reusable, this can be encapsulated into a tiny jQuery plugin:/// <reference path="jquery-1.4.2.js" /> (function ($) { $.getAntiForgeryToken = function (tokenWindow, appPath) { // HtmlHelper.AntiForgeryToken() must be invoked to print the token. tokenWindow = tokenWindow && typeof tokenWindow === typeof window ? tokenWindow : window; appPath = appPath && typeof appPath === "string" ? "_" + appPath.toString() : ""; // The name attribute is either __RequestVerificationToken, // or __RequestVerificationToken_{appPath}. tokenName = "__RequestVerificationToken" + appPath; // Finds the <input type="hidden" name={tokenName} value="..." /> from the specified. // var inputElements = $("input[type='hidden'][name='__RequestVerificationToken" + appPath + "']"); var inputElements = tokenWindow.document.getElementsByTagName("input"); for (var i = 0; i < inputElements.length; i++) { var inputElement = inputElements[i]; if (inputElement.type === "hidden" && inputElement.name === tokenName) { return { name: tokenName, value: inputElement.value }; } } return null; }; $.appendAntiForgeryToken = function (data, token) { // Converts data if not already a string. if (data && typeof data !== "string") { data = $.param(data); } // Gets token from current window by default. token = token ? token : $.getAntiForgeryToken(); // $.getAntiForgeryToken(window). data = data ? data + "&" : ""; // If token exists, appends {token.name}={token.value} to data. return token ? data + encodeURIComponent(token.name) + "=" + encodeURIComponent(token.value) : data; }; // Wraps $.post(url, data, callback, type). $.postAntiForgery = function (url, data, callback, type) { return $.post(url, $.appendAntiForgeryToken(data), callback, type); }; // Wraps $.ajax(settings). $.ajaxAntiForgery = function (settings) { settings.data = $.appendAntiForgeryToken(settings.data); return $.ajax(settings); }; })(jQuery); In most of the scenarios, it is Ok to just replace $.post() invocation with $.postAntiForgery(), and replace $.ajax() with $.ajaxAntiForgery():$.postAntiForgery(url, { productName: "Tofu", categoryId: 1 }, callback); // Token is posted. There might be some scenarios of custom token. Here $.appendAntiForgeryToken() is provided:data = $.appendAntiForgeryToken(data, token); // Token is already in data. No need to invoke $.postAntiForgery(). $.post(url, data, callback); And there are scenarios that the token is not in the current window. For example, an HTTP POST request can be sent by iframe, while the token is in the parent window. Here window can be specified for $.getAntiForgeryToken():data = $.appendAntiForgeryToken(data, $.getAntiForgeryToken(window.parent)); // Token is already in data. No need to invoke $.postAntiForgery(). $.post(url, data, callback); If you have better solution, please do tell me.

  Read the article

• RequestValidation Changes in ASP.NET 4.0

  - by Rick Strahl

  There’s been a change in the way the ValidateRequest attribute on WebForms works in ASP.NET 4.0. I noticed this today while updating a post on my WebLog all of which contain raw HTML and so all pretty much trigger request validation. I recently upgraded this app from ASP.NET 2.0 to 4.0 and it’s now failing to update posts. At first this was difficult to track down because of custom error handling in my app – the custom error handler traps the exception and logs it with only basic error information so the full detail of the error was initially hidden. After some more experimentation in development mode the error that occurs is the typical ASP.NET validate request error (‘A potentially dangerous Request.Form value was detetected…’) which looks like this in ASP.NET 4.0: At first when I got this I was real perplexed as I didn’t read the entire error message and because my page does have: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="NewEntry.aspx.cs" Inherits="Westwind.WebLog.NewEntry" MasterPageFile="~/App_Templates/Standard/AdminMaster.master" ValidateRequest="false" EnableEventValidation="false" EnableViewState="false" %> WTF? ValidateRequest would seem like it should be enough, but alas in ASP.NET 4.0 apparently that setting alone is no longer enough. Reading the fine print in the error explains that you need to explicitly set the requestValidationMode for the application back to V2.0 in web.config: <httpRuntime executionTimeout="300" requestValidationMode="2.0" /> Kudos for the ASP.NET team for putting up a nice error message that tells me how to fix this problem, but excuse me why the heck would you change this behavior to require an explicit override to an optional and by default disabled page level switch? You’ve just made a relatively simple fix to a solution a nasty morass of hard to discover configuration settings??? The original way this worked was perfectly discoverable via attributes in the page. Now you can set this setting in the page and get completely unexpected behavior and you are required to set what effectively amounts to a backwards compatibility flag in the configuration file. It turns out the real reason for the .config flag is that the request validation behavior has moved from WebForms pipeline down into the entire ASP.NET/IIS request pipeline and is now applied against all requests. Here’s what the breaking changes page from Microsoft says about it: The request validation feature in ASP.NET provides a certain level of default protection against cross-site scripting (XSS) attacks. In previous versions of ASP.NET, request validation was enabled by default. However, it applied only to ASP.NET pages (.aspx files and their class files) and only when those pages were executing. In ASP.NET 4, by default, request validation is enabled for all requests, because it is enabled before the BeginRequest phase of an HTTP request. As a result, request validation applies to requests for all ASP.NET resources, not just .aspx page requests. This includes requests such as Web service calls and custom HTTP handlers. Request validation is also active when custom HTTP modules are reading the contents of an HTTP request. As a result, request validation errors might now occur for requests that previously did not trigger errors. To revert to the behavior of the ASP.NET 2.0 request validation feature, add the following setting in the Web.config file: <httpRuntime requestValidationMode="2.0" /> However, we recommend that you analyze any request validation errors to determine whether existing handlers, modules, or other custom code accesses potentially unsafe HTTP inputs that could be XSS attack vectors. Ok, so ValidateRequest of the form still works as it always has but it’s actually the ASP.NET Event Pipeline, not WebForms that’s throwing the above exception as request validation is applied to every request that hits the pipeline. Creating the runtime override removes the HttpRuntime checking and restores the WebForms only behavior. That fixes my immediate problem but still leaves me wondering especially given the vague wording of the above explanation. One thing that’s missing in the description is above is one important detail: The request validation is applied only to application/x-www-form-urlencoded POST content not to all inbound POST data. When I first read this this freaked me out because it sounds like literally ANY request hitting the pipeline is affected. To make sure this is not really so I created a quick handler: public class Handler1 : IHttpHandler { public void ProcessRequest(HttpContext context) { context.Response.ContentType = "text/plain"; context.Response.Write("Hello World <hr>" + context.Request.Form.ToString()); } public bool IsReusable { get { return false; } } } and called it with Fiddler by posting some XML to the handler using a default form-urlencoded POST content type: and sure enough – hitting the handler also causes the request validation error and 500 server response. Changing the content type to text/xml effectively fixes the problem however, bypassing the request validation filter so Web Services/AJAX handlers and custom modules/handlers that implement custom protocols aren’t affected as long as they work with special input content types. It also looks that multipart encoding does not trigger event validation of the runtime either so this request also works fine: POST http://rasnote/weblog/handler1.ashx HTTP/1.1 Content-Type: multipart/form-data; boundary=------7cf2a327f01ae User-Agent: West Wind Internet Protocols 5.53 Host: rasnote Content-Length: 40 Pragma: no-cache <xml>asdasd</xml>--------7cf2a327f01ae *That* probably should trigger event validation – since it is a potential HTML form submission, but it doesn’t. New Runtime Feature, Global Scope Only? Ok, so request validation is now a runtime feature but sadly it’s a feature that’s scoped to the ASP.NET Runtime – effective scope to the entire running application/app domain. You can still manually force validation using Request.ValidateInput() which gives you the option to do this in code, but that realistically will only work with the requestValidationMode set to V2.0 as well since the 4.0 mode auto-fires before code ever gets a chance to intercept the call. Given all that, the new setting in ASP.NET 4.0 seems to limit options and makes things more difficult and less flexible. Of course Microsoft gets to say ASP.NET is more secure by default because of it but what good is that if you have to turn off this flag the very first time you need to allow one single request that bypasses request validation??? This is really shortsighted design… <sigh>© Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET  

  Read the article

• Upgrading from 13.04 to 13.10 stops

  - by BuZZ-dEE

  The upgrade to 13.10 stops after a lot of error messages about texlive packages, that I could close. The upgrade goes then further, but now it is stopped. What can I do to initiate the process again? The following are the last messages from the command window.: g multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 47: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 47: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 47: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 47: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 59: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 59: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 59: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 59: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 59: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 72: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 86: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 86: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 86: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 98: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 98: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 109: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 116: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 130: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 130: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 130: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 130: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 130: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 130: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 138: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 146: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 157: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 157: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 157: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 157: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 165: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 173: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 182: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-cjk-aliases.conf", line 182: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/99-language-selector-zh.conf", line 11: Having multiple values in <test> isn't supported and may not work as expected ERROR: error('unpack requires a bytes object of length 4',) (apport-gtk:16828): Gtk-CRITICAL **: gtk_main_quit: assertion 'main_loops != NULL' failed

  Read the article

• OBJ model loaded in LWJGL has a black area with no texture

  - by gambiting

  I have a problem with loading an .obj file in LWJGL and its textures. The object is a tree(it's a paid model from TurboSquid, so I can't post it here,but here's the link if you want to see how it should look like): http://www.turbosquid.com/FullPreview/Index.cfm/ID/701294 I wrote a custom OBJ loader using the LWJGL tutorial from their wiki. It looks like this: public class OBJLoader { public static Model loadModel(File f) throws FileNotFoundException, IOException { BufferedReader reader = new BufferedReader(new FileReader(f)); Model m = new Model(); String line; Texture currentTexture = null; while((line=reader.readLine()) != null) { if(line.startsWith("v ")) { float x = Float.valueOf(line.split(" ")[1]); float y = Float.valueOf(line.split(" ")[2]); float z = Float.valueOf(line.split(" ")[3]); m.verticies.add(new Vector3f(x,y,z)); }else if(line.startsWith("vn ")) { float x = Float.valueOf(line.split(" ")[1]); float y = Float.valueOf(line.split(" ")[2]); float z = Float.valueOf(line.split(" ")[3]); m.normals.add(new Vector3f(x,y,z)); }else if(line.startsWith("vt ")) { float x = Float.valueOf(line.split(" ")[1]); float y = Float.valueOf(line.split(" ")[2]); m.texVerticies.add(new Vector2f(x,y)); }else if(line.startsWith("f ")) { Vector3f vertexIndicies = new Vector3f(Float.valueOf(line.split(" ")[1].split("/")[0]), Float.valueOf(line.split(" ")[2].split("/")[0]), Float.valueOf(line.split(" ")[3].split("/")[0])); Vector3f textureIndicies = new Vector3f(Float.valueOf(line.split(" ")[1].split("/")[1]), Float.valueOf(line.split(" ")[2].split("/")[1]), Float.valueOf(line.split(" ")[3].split("/")[1])); Vector3f normalIndicies = new Vector3f(Float.valueOf(line.split(" ")[1].split("/")[2]), Float.valueOf(line.split(" ")[2].split("/")[2]), Float.valueOf(line.split(" ")[3].split("/")[2])); m.faces.add(new Face(vertexIndicies,textureIndicies,normalIndicies,currentTexture.getTextureID())); }else if(line.startsWith("g ")) { if(line.length()>2) { String name = line.split(" ")[1]; currentTexture = TextureLoader.getTexture("PNG", ResourceLoader.getResourceAsStream("res/" + name + ".png")); System.out.println(currentTexture.getTextureID()); } } } reader.close(); System.out.println(m.verticies.size() + " verticies"); System.out.println(m.normals.size() + " normals"); System.out.println(m.texVerticies.size() + " texture coordinates"); System.out.println(m.faces.size() + " faces"); return m; } } Then I create a display list for my model using this code: objectDisplayList = GL11.glGenLists(1); GL11.glNewList(objectDisplayList, GL11.GL_COMPILE); Model m = null; try { m = OBJLoader.loadModel(new File("res/untitled4.obj")); } catch (Exception e1) { e1.printStackTrace(); } int currentTexture=0; for(Face face: m.faces) { if(face.texture!=currentTexture) { currentTexture = face.texture; GL11.glBindTexture(GL11.GL_TEXTURE_2D, currentTexture); } GL11.glColor3f(1f, 1f, 1f); GL11.glBegin(GL11.GL_TRIANGLES); Vector3f n1 = m.normals.get((int) face.normal.x - 1); GL11.glNormal3f(n1.x, n1.y, n1.z); Vector2f t1 = m.texVerticies.get((int) face.textures.x -1); GL11.glTexCoord2f(t1.x, t1.y); Vector3f v1 = m.verticies.get((int) face.vertex.x - 1); GL11.glVertex3f(v1.x, v1.y, v1.z); Vector3f n2 = m.normals.get((int) face.normal.y - 1); GL11.glNormal3f(n2.x, n2.y, n2.z); Vector2f t2 = m.texVerticies.get((int) face.textures.y -1); GL11.glTexCoord2f(t2.x, t2.y); Vector3f v2 = m.verticies.get((int) face.vertex.y - 1); GL11.glVertex3f(v2.x, v2.y, v2.z); Vector3f n3 = m.normals.get((int) face.normal.z - 1); GL11.glNormal3f(n3.x, n3.y, n3.z); Vector2f t3 = m.texVerticies.get((int) face.textures.z -1); GL11.glTexCoord2f(t3.x, t3.y); Vector3f v3 = m.verticies.get((int) face.vertex.z - 1); GL11.glVertex3f(v3.x, v3.y, v3.z); GL11.glEnd(); } GL11.glEndList(); The currentTexture is an int - it contains the ID of the currently used texture. So my model looks absolutely fine without textures: (sorry I cannot post hyperlinks since I am a new user) i.imgur.com/VtoK0.png But look what happens if I enable GL_TEXTURE_2D: i.imgur.com/z8Kli.png i.imgur.com/5e9nn.png i.imgur.com/FAHM9.png As you can see an entire side of the tree appears to be missing - and it's not transparent, since it's not in the colour of the background - it's rendered black. It's not a problem with the model - if I load it using Kanji's OBJ loader it works fine(but the thing is,that I need to write my own OBJ loader) i.imgur.com/YDATo.png this is my OpenGL init section: //init display try { Display.setDisplayMode(new DisplayMode(Support.SCREEN_WIDTH, Support.SCREEN_HEIGHT)); Display.create(); Display.setVSyncEnabled(true); } catch (LWJGLException e) { e.printStackTrace(); System.exit(0); } GL11.glLoadIdentity(); GL11.glEnable(GL11.GL_TEXTURE_2D); GL11.glClearColor(1.0f, 0.0f, 0.0f, 1.0f); GL11.glShadeModel(GL11.GL_SMOOTH); GL11.glEnable(GL11.GL_DEPTH_TEST); GL11.glDepthFunc(GL11.GL_LESS); GL11.glDepthMask(true); GL11.glEnable(GL11.GL_NORMALIZE); GL11.glMatrixMode(GL11.GL_PROJECTION); GLU.gluPerspective (90.0f,800f/600f, 1f, 500.0f); GL11.glMatrixMode(GL11.GL_MODELVIEW); GL11.glEnable(GL11.GL_CULL_FACE); GL11.glCullFace(GL11.GL_BACK); //enable lighting GL11.glEnable(GL11.GL_LIGHTING); ByteBuffer temp = ByteBuffer.allocateDirect(16); temp.order(ByteOrder.nativeOrder()); GL11.glMaterial(GL11.GL_FRONT, GL11.GL_DIFFUSE, (FloatBuffer)temp.asFloatBuffer().put(lightDiffuse).flip()); GL11.glMaterialf(GL11.GL_FRONT, GL11.GL_SHININESS,(int)material_shinyness); GL11.glLight(GL11.GL_LIGHT2, GL11.GL_DIFFUSE, (FloatBuffer)temp.asFloatBuffer().put(lightDiffuse2).flip()); // Setup The Diffuse Light GL11.glLight(GL11.GL_LIGHT2, GL11.GL_POSITION,(FloatBuffer)temp.asFloatBuffer().put(lightPosition2).flip()); GL11.glLight(GL11.GL_LIGHT2, GL11.GL_AMBIENT,(FloatBuffer)temp.asFloatBuffer().put(lightAmbient).flip()); GL11.glLight(GL11.GL_LIGHT2, GL11.GL_SPECULAR,(FloatBuffer)temp.asFloatBuffer().put(lightDiffuse2).flip()); GL11.glLightf(GL11.GL_LIGHT2, GL11.GL_CONSTANT_ATTENUATION, 0.1f); GL11.glLightf(GL11.GL_LIGHT2, GL11.GL_LINEAR_ATTENUATION, 0.0f); GL11.glLightf(GL11.GL_LIGHT2, GL11.GL_QUADRATIC_ATTENUATION, 0.0f); GL11.glEnable(GL11.GL_LIGHT2); Could somebody please help me?

  Read the article

• Wrapping ASP.NET Client Callbacks

  - by Ricardo Peres

  Client Callbacks are probably the less known (and I dare say, less loved) of all the AJAX options in ASP.NET, which also include the UpdatePanel, Page Methods and Web Services. The reason for that, I believe, is it’s relative complexity: Get a reference to a JavaScript function; Dynamically register function that calls the above reference; Have a JavaScript handler call the registered function. However, it has some the nice advantage of being self-contained, that is, doesn’t need additional files, such as web services, JavaScript libraries, etc, or static methods declared on a page, or any kind of attributes. So, here’s what I want to do: Have a DOM element which exposes a method that is executed server side, passing it a string and returning a string; Have a server-side event that handles the client-side call; Have two client-side user-supplied callback functions for handling the success and error results. I’m going to develop a custom control without user interface that does the registration of the client JavaScript method as well as a server-side event that can be hooked by some handler on a page. My markup will look like this: 1: <script type="text/javascript"> 1:  2:  3: function onCallbackSuccess(result, context) 4: { 5: } 6:  7: function onCallbackError(error, context) 8: { 9: } 10:  </script> 2: <my:CallbackControl runat="server" ID="callback" SendAllData="true" OnCallback="OnCallback"/> The control itself looks like this: 1: public class CallbackControl : Control, ICallbackEventHandler 2: { 3: #region Public constructor 4: public CallbackControl() 5: { 6: this.SendAllData = false; 7: this.Async = true; 8: } 9: #endregion 10:  11: #region Public properties and events 12: public event EventHandler<CallbackEventArgs> Callback; 13:  14: [DefaultValue(true)] 15: public Boolean Async 16: { 17: get; 18: set; 19: } 20:  21: [DefaultValue(false)] 22: public Boolean SendAllData 23: { 24: get; 25: set; 26: } 27:  28: #endregion 29:  30: #region Protected override methods 31:  32: protected override void Render(HtmlTextWriter writer) 33: { 34: writer.AddAttribute(HtmlTextWriterAttribute.Id, this.ClientID); 35: writer.RenderBeginTag(HtmlTextWriterTag.Span); 36:  37: base.Render(writer); 38:  39: writer.RenderEndTag(); 40: } 41:  42: protected override void OnInit(EventArgs e) 43: { 44: String reference = this.Page.ClientScript.GetCallbackEventReference(this, "arg", "onCallbackSuccess", "context", "onCallbackError", this.Async); 45: String script = String.Concat("\ndocument.getElementById('", this.ClientID, "').callback = function(arg, context, onCallbackSuccess, onCallbackError){", ((this.SendAllData == true) ? "__theFormPostCollection.length = 0; __theFormPostData = ''; WebForm_InitCallback(); " : String.Empty), reference, ";};\n"); 46:  47: this.Page.ClientScript.RegisterStartupScript(this.GetType(), String.Concat("callback", this.ClientID), script, true); 48:  49: base.OnInit(e); 50: } 51:  52: #endregion 53:  54: #region Protected virtual methods 55: protected virtual void OnCallback(CallbackEventArgs args) 56: { 57: EventHandler<CallbackEventArgs> handler = this.Callback; 58:  59: if (handler != null) 60: { 61: handler(this, args); 62: } 63: } 64:  65: #endregion 66:  67: #region ICallbackEventHandler Members 68:  69: String ICallbackEventHandler.GetCallbackResult() 70: { 71: CallbackEventArgs args = new CallbackEventArgs(this.Context.Items["Data"] as String); 72:  73: this.OnCallback(args); 74:  75: return (args.Result); 76: } 77:  78: void ICallbackEventHandler.RaiseCallbackEvent(String eventArgument) 79: { 80: this.Context.Items["Data"] = eventArgument; 81: } 82:  83: #endregion 84: } And the event argument class: 1: [Serializable] 2: public class CallbackEventArgs : EventArgs 3: { 4: public CallbackEventArgs(String argument) 5: { 6: this.Argument = argument; 7: this.Result = String.Empty; 8: } 9:  10: public String Argument 11: { 12: get; 13: private set; 14: } 15:  16: public String Result 17: { 18: get; 19: set; 20: } 21: } You will notice two properties on the CallbackControl: Async: indicates if the call should be made asynchronously or synchronously (the default); SendAllData: indicates if the callback call will include the view and control state of all of the controls on the page, so that, on the server side, they will have their properties set when the Callback event is fired. The CallbackEventArgs class exposes two properties: Argument: the read-only argument passed to the client-side function; Result: the result to return to the client-side callback function, set from the Callback event handler. An example of an handler for the Callback event would be: 1: protected void OnCallback(Object sender, CallbackEventArgs e) 2: { 3: e.Result = String.Join(String.Empty, e.Argument.Reverse()); 4: } Finally, in order to fire the Callback event from the client, you only need this: 1: <input type="text" id="input"/> 2: <input type="button" value="Get Result" onclick="document.getElementById('callback').callback(callback(document.getElementById('input').value, 'context', onCallbackSuccess, onCallbackError))"/> The syntax of the callback function is: arg: some string argument; context: some context that will be passed to the callback functions (success or failure); callbackSuccessFunction: some function that will be called when the callback succeeds; callbackFailureFunction: some function that will be called if the callback fails for some reason. Give it a try and see if it helps!

  Read the article

• Updating a SharePoint master page via a solution (WSP)

  - by Kelly Jones

  In my last blog post, I wrote how to deploy a SharePoint theme using Features and a solution package.  As promised in that post, here is how to update an already deployed master page. There are several ways to update a master page in SharePoint.  You could upload a new version to the master page gallery, or you could upload a new master page to the gallery, and then set the site to use this new page.  Manually uploading your master page to the master page gallery might be the best option, depending on your environment.  For my client, I did these steps in code, which is what they preferred. (Image courtesy of: http://www.joiningdots.net/blog/2007/08/sharepoint-and-quick-launch.html ) Before you decide which method you need to use, take a look at your existing pages.  Are they using the SharePoint dynamic token or the static token for the master page reference?  The wha, huh? SO, there are four ways to tell an .aspx page hosted in SharePoint which master page it should use: “~masterurl/default.master” – tells the page to use the default.master property of the site “~masterurl/custom.master” – tells the page to use the custom.master property of the site “~site/default.master” – tells the page to use the file named “default.master” in the site’s master page gallery “~sitecollection/default.master” – tells the page to use the file named “default.master” in the site collection’s master page gallery For more information about these tokens, take a look at this article on MSDN. Once you determine which token your existing pages are pointed to, then you know which file you need to update.  So, if the ~masterurl tokens are used, then you upload a new master page, either replacing the existing one or adding another one to the gallery.  If you’ve uploaded a new file with a new name, you’ll just need to set it as the master page either through the UI (MOSS only) or through code (MOSS or WSS Feature receiver code – or using SharePoint Designer). If the ~site or ~sitecollection tokens were used, then you’re limited to either replacing the existing master page, or editing all of your existing pages to point to another master page.  In most cases, it probably makes sense to just replace the master page. For my project, I’m working with WSS and the existing pages are set to the ~sitecollection token.  Based on this, I decided to just upload a new version of the existing master page (and not modify the dozens of existing pages). Also, since my client prefers Features and solutions, I created a master page Feature and a corresponding Feature Receiver.  For information on creating the elements and feature files, check out this post: http://sharepointmagazine.net/technical/development/deploying-the-master-page . This works fine, unless you are overwriting an existing master page, which was my case.  You’ll run into errors because the master page file needs to be checked out, replaced, and then checked in.  I wrote code in my Feature Activated event handler to accomplish these steps. Here are the steps necessary in code: Get the file name from the elements file of the Feature Check out the file from the master page gallery Upload the file to the master page gallery Check in the file to the master page gallery Here’s the code in my Feature Receiver: 1: public override void FeatureActivated(SPFeatureReceiverProperties properties) 2: { 3: try 4: { 5:   6: SPElementDefinitionCollection col = properties.Definition.GetElementDefinitions(System.Globalization.CultureInfo.CurrentCulture); 7:   8: using (SPWeb curweb = GetCurWeb(properties)) 9: { 10: foreach (SPElementDefinition ele in col) 11: { 12: if (string.Compare(ele.ElementType, "Module", true) == 0) 13: { 14: // <Module Name="DefaultMasterPage" List="116" Url="_catalogs/masterpage" RootWebOnly="FALSE"> 15: // <File Url="myMaster.master" Type="GhostableInLibrary" IgnoreIfAlreadyExists="TRUE" 16: // Path="MasterPages/myMaster.master" /> 17: // </Module> 18: string Url = ele.XmlDefinition.Attributes["Url"].Value; 19: foreach (System.Xml.XmlNode file in ele.XmlDefinition.ChildNodes) 20: { 21: string Url2 = file.Attributes["Url"].Value; 22: string Path = file.Attributes["Path"].Value; 23: string fileType = file.Attributes["Type"].Value; 24:   25: if (string.Compare(fileType, "GhostableInLibrary", true) == 0) 26: { 27: //Check out file in document library 28: SPFile existingFile = curweb.GetFile(Url + "/" + Url2); 29:   30: if (existingFile != null) 31: { 32: if (existingFile.CheckOutStatus != SPFile.SPCheckOutStatus.None) 33: { 34: throw new Exception("The master page file is already checked out. Please make sure the master page file is checked in, before activating this feature."); 35: } 36: else 37: { 38: existingFile.CheckOut(); 39: existingFile.Update(); 40: } 41: } 42:   43: //Upload file to document library 44: string filePath = System.IO.Path.Combine(properties.Definition.RootDirectory, Path); 45: string fileName = System.IO.Path.GetFileName(filePath); 46: char slash = Convert.ToChar("/"); 47: string[] folders = existingFile.ParentFolder.Url.Split(slash); 48:   49: if (folders.Length > 2) 50: { 51: Logger.logMessage("More than two folders were detected in the library path for the master page. Only two are supported.", 52: Logger.LogEntryType.Information); //custom logging component 53: } 54:   55: SPFolder myLibrary = curweb.Folders[folders[0]].SubFolders[folders[1]]; 56:   57: FileStream fs = File.OpenRead(filePath); 58:   59: SPFile newFile = myLibrary.Files.Add(fileName, fs, true); 60:   61: myLibrary.Update(); 62: newFile.CheckIn("Updated by Feature", SPCheckinType.MajorCheckIn); 63: newFile.Update(); 64: } 65: } 66: } 67: } 68: } 69: } 70: catch (Exception ex) 71: { 72: string msg = "Error occurred during feature activation"; 73: Logger.logException(ex, msg, ""); 74: } 75:   76: } 77:   78: /// <summary> 79: /// Using a Feature's properties, get a reference to the Current Web 80: /// </summary> 81: /// <param name="properties"></param> 82: public SPWeb GetCurWeb(SPFeatureReceiverProperties properties) 83: { 84: SPWeb curweb; 85:   86: //Check if the parent of the web is a site or a web 87: if (properties != null && properties.Feature.Parent.GetType().ToString() == "Microsoft.SharePoint.SPWeb") 88: { 89:   90: //Get web from parent 91: curweb = (SPWeb)properties.Feature.Parent; 92: 93: } 94: else 95: { 96: //Get web from Site 97: using (SPSite cursite = (SPSite)properties.Feature.Parent) 98: { 99: curweb = (SPWeb)cursite.OpenWeb(); 100: } 101: } 102:   103: return curweb; 104: } This did the trick.  It allowed me to update my existing master page, through an easily repeatable process (which is great when you are working with more than one environment and what to do things like TEST it!).  I did run into what I would classify as a strange issue with one of my subsites, but that’s the topic for another blog post.

  Read the article

• CodePlex Daily Summary for Saturday, October 22, 2011

  CodePlex Daily Summary for Saturday, October 22, 2011Popular ReleasesWatchersNET CKEditor™ Provider for DotNetNuke®: CKEditor Provider 1.12.17: Changes Added FilePath Length Check when Uploading Files. Fixed Issue #6550 Fixed Issue #6536 Fixed Issue #6525 Fixed Issue #6500 Fixed Issue #6401 Fixed Issue #6490DotNet.Framework.Common: DotNet.Framework.Common 4.0: ??????????，????????????XML Explorer: XML Explorer 4.0.5: Changes in 4.0.5: Added 'Copy Attribute XPath to Address Bar' feature. Added methods for decoding node text and value from Base64 encoded strings, and copying them to the clipboard. Added 'ChildNodeDefinitions' to the options, which allows for easier navigation of parent-child and ID-IDREF relationships. Discovery happens on-demand, as nodes are expanded and child nodes are added. Nodes can now have 'virtual' child nodes, defined by an xpath to select an identifier (usually relative to ...Media Companion: MC 3.419b Weekly: A couple of minor bug fixes, but the important fix in this release is to tackle the extremely long load times for users with large TV collections (issue #130). A note has been provided by developer Playos: "One final note, you will have to suffer one final long load and then it should be fixed... alternatively you can delete the TvCache.xml and rebuild your library... The fix was to include the file extension so it doesn't have to look for the video file (checking to see if a file exists is a...CODE Framework: 4.0.11021.0: This build adds a lot of our WPF components, including our MVVC and MVC components as well as a "Metro" and "Battleship" style.Manejo de tags - PHP sobre apache: tagqrphp: Primera version: Para que funcione el programa se debe primero obtener un id para desarrollo del tag eso lo entrega Microsoft registrandose en el sitio. http://tag.microsoft.com - En tagm.php que llama a la libreria Microsoft Tag PHP Library (Codigo que sirve para trabajar con PHP y Tag) - Llenamos los datos del formulario y ejecutamos para obtener el codigo tag de microsoft el cual apunte a la url que le indicamos en el formulario - Libreria MStag.php (tiene mucha explicación del funciona...GridLibre para Visual FoxPro: GridLibre para Visual FoxPro v3.5: GridLibre Para Visual FoxPro: esta herramienta ayudara a los usuarios y programadores en los manejos de los datos, como Filtrar, multiseleccion y el autoformato a las columnas como la asignacion del controlsource.Self-Tracking Entity Generator for WPF and Silverlight: Self-Tracking Entity Generator v 0.9.9: Self-Tracking Entity Generator v 0.9.9 for Entity Framework 4.0Umbraco CMS: Umbraco 5.0 CMS Alpha 3: Umbraco 5 Alpha 3Umbraco 5 (aka Jupiter) will be the next version of everyone's favourite, friendly ASP.NET CMS that already powers over 100,000 websites worldwide. Try out the Alpha of v5 today! If you're new to Umbraco and would like to get a low-down on our popular and easy-to-learn approach to content management, check out our intro video. What's Alpha 3?This is our third Alpha release. It's intended for developers looking to become familiar with the codebase & architecture, or for thos...Vkontakte WP: Vkontakte: source codeWay2Sms Applications for Android, Desktop/Laptop & Java enabled phones: Way2SMS Desktop App v2.0: 1. Fixed issue with sending messages due to changes to Way2Sms site 2. Updated the character limit to 160 from 140GART - Geo Augmented Reality Toolkit: 1.0.1: About Release 1.0.1 Release 1.0.1 is a service release that addresses several issues and improves performance. As always, check the Documentation tab for instructions on how to get started. If you don't have the Windows Phone SDK yet, grab it here. Breaking Change Please note: There is a breaking change in this release. As noted below, the WorldCalculationMode property of ARItem has been replaced by a user-definable function. ARItem is now automatically wired up with a function that perform...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.32: Fix for issue #16710 - string literals in "constant literal operations" which contain ASP.NET substitutions should not be considered "constant." Move the JS1284 error (Misplaced Function Declaration) so it only fires when in strict mode. I got a couple complaints that people didn't like that error popping up in their existing code when they could verify that the location of that function, although not strict JS, still functions as expected cross-browser.Naked Objects: Naked Objects Release 4.0.110.0: Corresponds to the packaged version 4.0.110.0 available via NuGet. Please note that the easiest way to install and run the Naked Objects Framework is via the NuGet package manager: just search the Official NuGet Package Source for 'nakedobjects'. It is only necessary to download the source code (from here) if you wish to modify or re-build the framework yourself. If you do wish to re-build the framework, consul the file HowToBuild.txt in the release. Documentation Please note that after ...myCollections: Version 1.5: New in this version : Added edit type for selected elements Added clean for selected elements Added Amazon Italia Added Amazon China Added TVDB Italia Added TVDB China Added Turkish language You can now manually add artist Added Order by Rating Improved Add by Media Improved Artist Detail Upgrade Sqlite engine View, Zoom, Grouping, Filter are now saved by category Added group by Artist Added CubeCover View BugFixingFacebook C# SDK: 5.3: This is a BETA release which adds new features and bug fixes to v5.2.1. removed dependency from Code Contracts enabled Task Parallel Support in .NET 4.0+ added support for early preview for .NET 4.5 added additional method overloads for .NET 4.5 to support IProgress<T> for upload progress added new CS-WinForms-AsyncAwait.sln sample demonstrating the use of async/await, upload progress report using IProgress<T> and cancellation support Query/QueryAsync methods uses graph api instead...IronPython: 2.7.1 RC: This is the first release candidate of IronPython 2.7.1. Like IronPython 54498, this release requires .NET 4 or Silverlight 4. This release will replace any existing IronPython installation. If there are no showstopping issues, this will be the only release candidate for 2.7.1, so please speak up if you run into any roadblocks. The highlights of 2.7.1 are: Updated the standard library to match CPython 2.7.2. Add the ast, csv, and unicodedata modules. Fixed several bugs. IronPython To...Rawr: Rawr 4.2.6: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...Home Access Plus+: v7.5: Change Log: New Booking System (out of Beta) New Help Desk (out of Beta) New My Files (Developer Preview) Token now saved into Cookie so the system doesn't TIMEOUT as much File Changes: ~/bin/hap.ad.dll ~/bin/hap.web.dll ~/bin/hap.data.dll ~/bin/hap.web.configuration.dll ~/bookingsystem/admin/default.aspx ~/bookingsystem/default.aspx REMOVED ~/bookingsystem/bookingpopup.ascx REMOVED ~/bookingsystem/daylist.ascx REMOVED ~/bookingsystem/new.aspx ~/helpdesk/default.aspx ...Visual Micro - Arduino for Visual Studio: Arduino for Visual Studio 2008 and 2010: Arduino for Visual Studio 2010 has been extended to support Visual Studio 2008. The same functionality and configuration exists between the two versions. The 2010 addin runs .NET4 and the 2008 addin runs .NET3.5, both are installed using a single msi and both share the same configuration settings. The only known issue in 2008 is that the button and menu icons are missing. Please logon to the visual micro forum and let us know if things are working or not. Read more about this Visual Studio ...New Projects#foo Core: Core functionality extensions of .NET used by all HashFoo projects.#foo Nhib: #foo NHibernate extensions.Aagust G: Hello all ! Its a free JQuery Image Slider....ACP Log Analyzer: ACP Log Analyzer provides a quick and easy mechanism for generating a report on your ACP-based astronomical observing activities. Developed in Microsoft Visual Studio 2010 using C#, the .NET Framework version 4 and WPF.BlobShare Sample: TBDCompletedWorkflowCleanUp: This tool once executed on a list delete all completed workflow instancesCRM 2011 Visual Ribbon Editor: Visual Ribbon Editor is a tool for Microsoft Dynamics CRM 2011 that lets you edit CRM ribbons. This ribbon editor shows a preview of the CRM ribbon as you are editing it and allows you to add ribbon buttons and groups without needing to fully understand the ribbon XML schema.GearMerge: Organizes Movies and TV Series files from one Hard Drive to another. I created it for myself to update external drives with movies and TV shows from my collection.Generic Object Storage Helper for WinRT: ObjectStorageHelper<T> is a Generic class that simplifies storage of data in WinRT applications.Government Sanctioned Espionage RPG: Government Sanctioned is a modern SRD-like espionage game server. Visit http://wiki.government-sanctioned.us:8040 for game design and play information or homepage http://www.government-sanctioned.us Government Sanctioned is an online, text-based espionage RPG (similar to a MUD/MOO) that takes place against the backdrop of a highly-secretive U.S. Government agency whose stated goals don't always match the dirty work the agents tend to find themselves in. - over 15 starting profession...GridLibre para Visual FoxPro: GridLibre Para Visual FoxPro: esta herramienta ayudara a los usuarios y programadores en los manejos de los datos, como Filtrar, multiseleccion y el autoformato a las columnas como la asignacion del controlsource.HTML5 Video Web Part for SharePoint 2010: A web part for SharePoint 2010 that enable users playing video into the page using the Ribbon bar.Jogo do Galo: JOGO DO GALO REGRAS •O tabuleiro é a matriz de três linhas em três colunas. •Dois jogadores escolhem três peças cada um. •Os jogadores jogam alternadamente, uma peça de cada vez, num espaço que esteja vazio. •O objectivo é conseguir três peças iguais em linha, quer horizontal, vKarol sie uczy silverlajta: on sie naprawde tego uczy!Manejo de tags - PHP sobre apache: Hago uso de la libreria Microsoft Tag PHP Library para que pueda funcionar la aplicación sobre Apache finalmente puede crear tag de micrsosoft desde el formulario creado. Modem based SMS Gateway: It is an easy to use modem based SMS server that provide easier solutions for SMS marketing or SMS based services. It is highly programmable and the easy to use API interface makes SMS integration very easy. Embedded SMS processor provides customized solution to many of your needs even without building any custom software.Mund Publishing Feture: Mund Publishing FeatureMyTFSTest: TestNHS HL7 CDA Document Developer: A project to demonstrate how templated HL7 CDA documents can be created by using a common API. The API is designed to be used in .NET applications. A number of examples are provided using C#OpenShell: OpenShell is an open source implementation of the Windows PowerShell engine. It is to make integrating PowerShell into standalone console programs simple.Powershell Script to Copy Lists in a Site Collection in MOSS 2007 and SPS 2010: Hi, This is a powershell script file that copies a list within the same site collection. This works in Sharepoint 2007 and Sharepoint 2010 as well. THis will flash the messages before taking the input values. This will in this way provide the clear ideas about the values to beSharePoint Desktop: SharePoint Desktop is a explorer-like webpart that makes it possible to drag and drop items (documents and folders), copy and paste items and explore all SharePoint document libraries in 1 place.SQL floating point compare function: Comparison of floating point values in SQL Server not always gives the expected result. With this function, comparison is only done on the first 15 significant digits. Since SQL Server only garantees a precision of 15 digits for float datatypes, this is expected to be secure.Stock Analyzer: It is a stock management software. It's main job is to store market realtime data on a database to be able to analyse it latter and create automatic systems that operate directly on the stock exchange market. It will have different modules to do this task: - Realtime data capture. - Realtime data analysis - Historic analysis. - Order execution. - Strategy test. - Strategy execution. It's developed in C# and with WPF.VB_Skype: VB_Skype utilizza la libreria Skype4COM per integrare i servizi Skype con un'applicazione Visual Basic (Windows Forms). L'applicazione comprende un progetto di controllo personalizzato che costituisce il "wrapper" verso la libreria Skype4COM e un progetto con una demo di utilizzo. Progetto che dovrebbe essere utilizzato nella mia sessione, come uno degli speaker della conferenza "WPC 2011" che si terrà ad Assago (MI) nei giorni 22-23-24 Novembre 2011. La mia sessione è in agenda per il 24...Word Template Generator: Custom Template Generator for Microsoft Word, developed in C#?????OA??: ?????OA??

  Read the article

• Authenticating clients in the new WCF Http stack

  - by cibrax

  About this time last year, I wrote a couple of posts about how to use the “Interceptors” from the REST starker kit for implementing several authentication mechanisms like “SAML”, “Basic Authentication” or “OAuth” in the WCF Web programming model. The things have changed a lot since then, and Glenn finally put on our hands a new version of the Web programming model that deserves some attention and I believe will help us a lot to build more Http oriented services in the .NET stack. What you can get today from wcf.codeplex.com is a preview with some cool features like Http Processors (which I already discussed here), a new and improved version of the HttpClient library, Dependency injection and better TDD support among others. However, the framework still does not support an standard way of doing client authentication on the services (This is something planned for the upcoming releases I believe). For that reason, moving the existing authentication interceptors to this new programming model was one of the things I did in the last few days. In order to make authentication simple and easy to extend,  I first came up with a model based on what I called “Authentication Interceptors”. An authentication interceptor maps to an existing Http authentication mechanism and implements the following interface, public interface IAuthenticationInterceptor{ string Scheme { get; } bool DoAuthentication(HttpRequestMessage request, HttpResponseMessage response, out IPrincipal principal);} An authentication interceptors basically needs to returns the http authentication schema that implements in the property “Scheme”, and implements the authentication mechanism in the method “DoAuthentication”. As you can see, this last method “DoAuthentication” only relies on the HttpRequestMessage and HttpResponseMessage classes, making the testing of this interceptor very simple (There is no need to do some black magic with the WCF context or messages). After this, I implemented a couple of interceptors for supporting basic authentication and brokered authentication with SAML (using WIF) in my services. The following code illustrates how the basic authentication interceptors looks like. public class BasicAuthenticationInterceptor : IAuthenticationInterceptor{ Func<UsernameAndPassword, bool> userValidation; string realm;  public BasicAuthenticationInterceptor(Func<UsernameAndPassword, bool> userValidation, string realm) { if (userValidation == null) throw new ArgumentNullException("userValidation");  if (string.IsNullOrEmpty(realm)) throw new ArgumentNullException("realm");  this.userValidation = userValidation; this.realm = realm; }  public string Scheme { get { return "Basic"; } }  public bool DoAuthentication(HttpRequestMessage request, HttpResponseMessage response, out IPrincipal principal) { string[] credentials = ExtractCredentials(request); if (credentials.Length == 0 || !AuthenticateUser(credentials[0], credentials[1])) { response.StatusCode = HttpStatusCode.Unauthorized; response.Content = new StringContent("Access denied"); response.Headers.WwwAuthenticate.Add(new AuthenticationHeaderValue("Basic", "realm=" + this.realm));  principal = null;  return false; } else { principal = new GenericPrincipal(new GenericIdentity(credentials[0]), new string[] {});  return true; } }  private string[] ExtractCredentials(HttpRequestMessage request) { if (request.Headers.Authorization != null && request.Headers.Authorization.Scheme.StartsWith("Basic")) { string encodedUserPass = request.Headers.Authorization.Parameter.Trim();  Encoding encoding = Encoding.GetEncoding("iso-8859-1"); string userPass = encoding.GetString(Convert.FromBase64String(encodedUserPass)); int separator = userPass.IndexOf(':');  string[] credentials = new string[2]; credentials[0] = userPass.Substring(0, separator); credentials[1] = userPass.Substring(separator + 1);  return credentials; }  return new string[] { }; }  private bool AuthenticateUser(string username, string password) { var usernameAndPassword = new UsernameAndPassword { Username = username, Password = password };  if (this.userValidation(usernameAndPassword)) { return true; }  return false; }} This interceptor receives in the constructor a callback in the form of a Func delegate for authenticating the user and the “realm”, which is required as part of the implementation. The rest is a general implementation of the basic authentication mechanism using standard http request and response messages. I also implemented another interceptor for authenticating a SAML token with WIF. public class SamlAuthenticationInterceptor : IAuthenticationInterceptor{ SecurityTokenHandlerCollection handlers = null;  public SamlAuthenticationInterceptor(SecurityTokenHandlerCollection handlers) { if (handlers == null) throw new ArgumentNullException("handlers");  this.handlers = handlers; }  public string Scheme { get { return "saml"; } }  public bool DoAuthentication(HttpRequestMessage request, HttpResponseMessage response, out IPrincipal principal) { SecurityToken token = ExtractCredentials(request);  if (token != null) { ClaimsIdentityCollection claims = handlers.ValidateToken(token);  principal = new ClaimsPrincipal(claims);  return true; } else { response.StatusCode = HttpStatusCode.Unauthorized; response.Content = new StringContent("Access denied");  principal = null;  return false; } }  private SecurityToken ExtractCredentials(HttpRequestMessage request) { if (request.Headers.Authorization != null && request.Headers.Authorization.Scheme == "saml") { XmlTextReader xmlReader = new XmlTextReader(new StringReader(request.Headers.Authorization.Parameter));  var col = SecurityTokenHandlerCollection.CreateDefaultSecurityTokenHandlerCollection(); SecurityToken token = col.ReadToken(xmlReader);  return token; }  return null; }}This implementation receives a “SecurityTokenHandlerCollection” instance as part of the constructor. This class is part of WIF, and basically represents a collection of token managers to know how to handle specific xml authentication tokens (SAML is one of them). I also created a set of extension methods for injecting these interceptors as part of a service route when the service is initialized. var basicAuthentication = new BasicAuthenticationInterceptor((u) => true, "ContactManager");var samlAuthentication = new SamlAuthenticationInterceptor(serviceConfiguration.SecurityTokenHandlers); // use MEF for providing instancesvar catalog = new AssemblyCatalog(typeof(Global).Assembly);var container = new CompositionContainer(catalog);var configuration = new ContactManagerConfiguration(container); RouteTable.Routes.AddServiceRoute<ContactResource>("contact", configuration, basicAuthentication, samlAuthentication);RouteTable.Routes.AddServiceRoute<ContactsResource>("contacts", configuration, basicAuthentication, samlAuthentication); In the code above, I am injecting the basic authentication and saml authentication interceptors in the “contact” and “contacts” resource implementations that come as samples in the code preview. I will use another post to discuss more in detail how the brokered authentication with SAML model works with this new WCF Http bits. The code is available to download in this location.

  Read the article

< Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >