Search Results

Search found 11482 results on 460 pages for 'portable device'.

Page 336/460 | < Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >

  • Mobility Card in Bangalore for Transportation

    - by Rekha
    Transport Minister R Ashoka announced Bangalore Metropolitan Transport Corporation (BMTC) services are going to be best in the world soon. BMTC has planned to launch a Mobility Card with which commuters can get rides in BMTC, KSRTC and future Metro Train facilities without buying tickets for each ride. The conductor with have a simple device in which the commuters can swipe their cards to deduct the ticket tarrif for bus or metro rides automatically. This Mobility card can be obtained by paying a fixed amount. This method is time saving and the commuters can be saved from paying the exact change for tickets. Ashoka says the Volvo Vayu Vaira services have internet connectivity and voice announcements of every bus stop names and this has been appreciated by the commuters. With WiFi Connections in Shatabdi Trains soon and Mobility Cards, India is soon to match the services of US Standards. Government officials are keen in implementing these services before the end of this year. Hope all these services are well used and maintained.   This article titled,Mobility Card in Bangalore for Transportation, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • Kinect will recognise your finger movement

    - by Boonei
    Sources inside Microsoft suggest they MS guys are tying to improve motion controller. This could be a huge boost to gaming. There are quite a few things that we can do with our fingers when playing games like driving, shooting,sports etc. If fingers are captured then  XBox will give more realistic version of our avatar. Eurogamer has also suggested the same according to their sources. It would be only(mostly) a software update and would not require a new camera, because the USB controller interface currently in place in Kinect can take in data up-to 35MBps. The current utilization is only around roughly 1/2 of it. So there is currently a facility to send more data. Little more tech data, Kinect does transmit 320×240-pixel in 30 fps, if the device could capture and transfer at 640×480 pixels, then better resolution can detect more movements compared to current level of detection. Lets wait and watch ! This article titled,Kinect will recognise your finger movement, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • Where can I find video and audio drivers for my netbook?

    - by Ari
    I got a little netbook yesterday (an Acer Aspire One) for schoolwork and read in numerous reviews Ubuntu was a must. I dove into it blindly and downloaded 12.04 LTS and though I admit it's faster than before, I have no idea how it works yet and was stupid enough to get rid of the Windows 7 Starter that was on there before completely. I can see myself getting used to the rest of Ubuntu, but the main issue is that it seems to have eaten all of my drivers and I don't know where to get any Ubuntu compatible ones. Any video at all is jilty and kind of creepy and any audio is very distorted and REALLY creepy. I understand that this is a tiny $150 typing and light web use school device I'm talking about, but I feel really stupid making the poor thing worse than it was before and not knowing what to do about it. Does anyone know how to install graphics/sound drivers? Or, alternatively, does anyone know where I can get a copy of Windows 7 Starter. I can see myself liking this if the problems are fixable, but if not I still have the product key and would be able to tackle the problem by myself with that.

    Read the article

  • how can I fix error: hd0 out of disk?

    - by rux
    I am running Ubuntu 12.04 on a netbook - Acer AS 1410. After a download session, I restarted the computer and it said: error: hd0 out of disk. Press any key to continue... I pressed everything, but it's just frozen there. Any idea what's wrong with it and what I can do to fix it? I haven't been able to run my computer at all since it's frozen like that. Help please! I booted the live cd and ran sudo fdisk -lu into terminal, and here's what it gave me: Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a696263 Device Boot Start End Blocks Id System /dev/sda3 2048 117229567 58613760 5 Extended /dev/sda5 * 71647232 109039615 18696192 83 Linux /dev/sda6 109041664 117229567 4093952 82 Linux swap / Solaris /dev/sda7 4096 71645183 35820544 83 Linux Partition table entries are not in disk order I am somewhat of a beginner in this, so don't know what this means. any ideas? Thanks!

    Read the article

  • LibGdx efficient data saving/loading?

    - by grimrader22
    Currently, my LibGDX game consists of a 512 x 512 map of Tiles and entities such as players and monsters. I am wondering how to efficiently save and load the data of my levels. At the moment I am using JSON serialization for each class I want to save. I implement the Json.Serializable interface for all of these classes and write only the variables that are necessary. So my map consists of 512 x 512 tiles, that's 260,000 tiles. Each tile on the map consists of a Tile object, which points to some final Tile object like a GRASS_TILE or a STONE_TILE. When I serialize each level tile, the final Tile that it points to is re-serialized over and over again, so if I have 100 Tiles all pointing to GRASS_TILE, the data of GRASS_TILE is written 100 times over. When I go to load/deserialize my objects, 100 GrassTile objects are created, but they are each their own object. They no longer point to the final tile object. I feel like this reading/writing files very slow. If I were to abandon JSON serialization, to my knowledge my next best option would be saving the level data to a sql database. Unless there is a way to speed up serializing/deserializing 260,000 tiles I may have to do this. Is this a good idea? Could I really write that many tiles to the database efficiently? To sum all this up, I am trying to save my levels using JSON serialization, but it is VERY slow. What other options do I have for saving the data of so many tiles. I also must note that the JSON serialization is not slow on a PC, it is only VERY slow on a mobile device. Since file writing/reading is so slow on mobile devices, what can I do?

    Read the article

  • Installing LBP 2900 ubuntu -> libs folders wrong?

    - by Peter Smit
    I am trying to get my Canon LBP2900 printer to work on Ubuntu 11.10 64 bit. What I have done is try to follow the steps on https://help.ubuntu.com/community/CanonCaptDrv190 So I downloaded the version 2.3 driver and tried to convert the rpm files to debian and installed them sudo alien cndrvcups-capt-2.30-1.x86_64.rpm cndrvcups-common-2.30-1.x86_64.rpm sudo dpkg -i cndrvcups-capt-2.30-1.x86_64.deb cndrvcups-common-2.30-1.x86_64.deb restarted cups and try to install the printer with lpadmin: sudo service cups restart sudo /usr/sbin/lpadmin -p LBP2900 -m /usr/share/cups/model/CNCUPSLBP2900CAPTK.ppd -v ccp://localhost:59787 -E What I noticed however that on the step with lpadmin it goes wrong with the error: lpadmin: Bad device-uri scheme "ccp" After trying to trace what has gone wrong, I think I nailed it to the fact that dpkg installed a file /usr/lib64/cups/backend/ccp instead of /usr/lib/cups/backend/ccp Checking the original rpm with archive manager shows indeed that /usr/lib and /usr/lib64 are used, with the backend/cpp file only installed in lib64. As I understand correctly, Ubuntu 11.10 uses /usr/lib32 and /usr/lib instead so the files are installed in the wrong place. Is there an automated method of converting the rpm/deb files with the wrong lib structure to one with the right lib structure for ubuntu 11.10? Or am I completely on the wrong track for getting my printer installed?

    Read the article

  • GParted in UBUNTU shows entire disk as UNALLOCATED SPACE

    - by msPeachy
    Good day to everyone. I hope someone can help me with my problem. I have a dual boot Windows and Ubuntu system. I recently encountered an hd0 out of disk error and wasn't able to boot Ubuntu. So I booted into Windows, after 2 to 3 times of booting and rebooting Windows, I tried booting Ubuntu but still I get the hd0 out of disk error. I decided to run Ubuntu from LIVEUSB to try to fix my Ubuntu partition using GParted, but when I run GParted, it shows my entire disk as UNALLOCATED SPACE! The strange thing is that Nautilus still shows and mounts my partitions. Also every time I boot into Windows , my partitions exists and I am able to read and write to them. I have no idea what is wrong. Please help! I can't stand using Windows since most of the tools I use are in Ubuntu. I don't mind reinstalling Ubuntu. In fact I already tried reinstalling using the LIVEUSB but I wasn't able to, since GParted or the Ubuntu installer itself does not recognized my partitions and shows the entire disk as unallocated space. I am currently running Ubuntu from LIVEUSB. Here's the outpuf of sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb30ab30a Device Boot Start End Blocks Id System /dev/sda1 * 2048 104869887 52433920 83 Linux /dev/sda2 104869888 105074687 102400 7 HPFS/NTFS/exFAT /dev/sda3 105074688 156149759 25537536 7 HPFS/NTFS/exFAT /dev/sda4 156151800 625153409 234500805 f W95 Ext'd (LBA) /dev/sda5 156151808 169156591 6502392 82 Linux swap / Solaris /dev/sda6 169158656 294991871 62916608 7 HPFS/NTFS/exFAT /dev/sda7 294993920 471037944 88022012+ 7 HPFS/NTFS/exFAT /dev/sda8 471041928 625121152 77039612+ 7 HPFS/NTFS/exFAT When I run, sudo parted -l, I got this error message: ubuntu@ubuntu:~$ sudo parted -l Error: Can't have a partition outside the disk!

    Read the article

  • a little code to allow word substitution depending on user

    - by Fred Quimby
    Can anyone help? I'm creating a demo web app in html in order for people to physically see and comment on the app prior to committing to a proper build. So whilst the proper app will be database driven, my demo is just standard html with some javascript effects. What I do want to demonstrate is that different user group will see different words. For example, imagine I have an html sentence that says 'This will cost £100 to begin'. What I need to some way of identifying that if the user has deemed themselves to be from the US, the sentence says 'This will cost $100 to begin'. This requirement is peppered throughtout the pages but I'm happy to add each one manually. So I envisage some code along the lines of 'first, remove the [boot US] trunk' where the UK version is 'first remove the boot' but the code is saying that the visitor needs the US version. It then looks up boot (in an Access database perhaps) and sees that the table says for boot for US, display 'trunk'. I'm not a programmer but I can normally cobble together scripts so I'm hoping someone may have a relatively easy solution in javascrip, CSS or asp. To recap; I have a number of words or short sentences that need to appear differently and I'm happy to manually insert each one if necessary (but would be even better if the words were automatically changed). And I need a device which allows me to tell the pages to choose the US version, or for example, the New Zealand version. Thanks in advance. Fred

    Read the article

  • 12.04 grub unable to boot on /sde, upgrade-grub and boot-repair failed, please help

    - by VGR
    My problem is I've 4 disks in a raid array listed as sda, sdb... sdd and grub 2 refuses to boot on /sde (the 5th disk, standalone and containing a clean install of 12.04 64 bits). I tried all solutions but all fail. (live CD/USB with grub-setup, also tried repair-grub, and tried also in the "grub rescue" set prefix= etc). I also tried to deactivate the RAID array in the BIOS, but I'd rather not destroy it, and I didn't find a way to make the standalone disk as '/sda1' (this would satisfy grub). In the BIOS, the would-be /sda is the only bootable hard disk; it ends up as /sde and grubs complains. I've made repair-grub issue a pastebin. I always end up in grub-rescue and I'm stuck. I need Ubuntu to boot so that I can add the device array handler for my disks. I can't switch the disks and I can't disconnect the SATA RAID controller. I need: (a) a workaround so that grub starts on /sde; or (b) a way to change the order in which Ubuntu sees the disks, at boot time. I could then provide grub with a /sda1. Thanks a lot. up please thanks a lot it's not the same problem as booting ubuntu from raid. My RAID array serves only of data repository windows had no problem with this configuration

    Read the article

  • CodePlex Daily Summary for Wednesday, October 17, 2012

    CodePlex Daily Summary for Wednesday, October 17, 2012Popular ReleasesD3 Loot Tracker: 1.5.5: Compatible with 1.05.Test Management eXtensions PowerShell module: TMX 0.4.5: Bugfix in BackUp-TMXTestResults: 1. adding escape characters to sring data (at least, part) 2. ErrorRecord is now supported as a string Known issue: only one screenshot per test result.Write Once, Play Everywhere: MonoGame 3.0 (BETA): This is a beta release of the up coming MonoGame 3.0. It contains an Installer which will install a binary release of MonoGame on windows boxes with the following platforms. Windows, Linux, Android and Windows 8. If you need to build for iOS or Mac you will need to get the source code at this time as the installers for those platforms are not available yet. The installer will also install a bunch of Project templates for Visual Studio 2010 , 2012 and MonoDevleop. For those of you wish...Windawesome: Windawesome v1.4.1 x64: Fixed switching of applications across monitors Changed window flashing API (fix your config files) Added NetworkMonitorWidget (thanks to weiwen) Any issues/recommendations/requests for future versions? This is the 64-bit version of the release. Be sure to use that if you are on a 64-bit Windows. Works with "Required DLLs v3".CODE Framework: 4.0.21017.0: See change log in the Documentation section for details.Global Stock Exchange (Hobby Project): Global Stock Exchange - Invst Banking (Hobby Proj): Initial VersionMagelia WebStore Open-source Ecommerce software: Magelia WebStore 2.1: Add support for .net 4.0 to Magelia.Webstore.Client and StarterSite version 2.1.254.3 Scheduler Import & Export feature UTC datetime and timezone support .net 4.5 and Visual Studio 2012 migration client magelia global refactoring nugget package http://nuget.org/packages/Magelia.Webstore.Client burst optimisation burst time improvment (multithreading, index, ...) current burst is still active when a new burst is generating bugfixes version 2.1.254.1RazorSourceGenerator: RazorSourceGenerator v1.0 Installer: RazorSourceGenerator v1.0 InstallerJayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.2: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2.2 For detailed release notes check the release notes. Revitalized IndexedDB providerNow you c...VFPX: FoxcodePlus: FoxcodePlus - Visual Studio like extensions to Visual FoxPro IntelliSense.Droid Explorer: Droid Explorer 0.8.8.8 Beta: fixed the icon for packages on the desktop fixed the install dialog closing right when it starts removed the link to "set up the sdk for me" as this is no longer supported. fixed bug where the device selection dialog would show, even if there was only one device connected. fixed toolbar from having "gap" between other toolbar removed main menu items that do not have any menus Fiskalizacija za developere: FiskalizacijaDev 1.0: Prva verzija ovog projekta, još je uvijek oznacena kao BETA - ovo znaci da su naša testiranja prošla uspješno :) No, kako mi ne proizvodimo neki software za blagajne, tako sve ovo nije niti isprobano u "realnim" uvjetima - svaka je sugestija, primjedba ili prijava bug-a je dobrodošla. Za sve ovo koristite, molimo, Discussions ili Issue Tracker. U ovom trenutku runtime binary je raspoloživ kao Any CPU za .NET verzije 2.0. Javite ukoliko trebaju i verzije buildane za 32-bit/64-bit kao i za .N...Squiggle - A free open source LAN Messenger: Squiggle 3.2 (Development): NOTE: This is development release and not recommended for production use. This release is mainly for enabling extensibility and interoperability with other platforms. Support for plugins Support for extensions Communication layer and protocol is platform independent (ZeroMQ, ProtocolBuffers) Bug fixes New /invite command Edit the sent message Disable update check NOTE: This is development release and not recommended for production use.AcDown????? - AcDown Downloader Framework: AcDown????? v4.2: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2...PHPExcel: PHPExcel 1.7.8: See Change Log for details of the new features and bugfixes included in this release, and methods that are now deprecated. Note changes to the PDF Writer: tcPDF is no longer bundled with PHPExcel, but should be installed separately if you wish to use that 3rd-Party library with PHPExcel. Alternatively, you can choose to use mPDF or DomPDF as PDF Rendering libraries instead: PHPExcel now provides a configurable wrapper allowing you a choice of PDF renderer. See the documentation, or the PDF s...ALM Assessment Guidance: Community Value-Adds: Important: This download has been created using ALM Ranger bits by the community, for the community. Although ALM Rangers were involved in the process, the content has not been through their quality review. Please post your candid feedback and improvement suggestions to the Community tab of this Codeplex project. DirectX Tool Kit: October 12, 2012: October 12, 2012 Added PrimitiveBatch for drawing user primitives Debug object names for all D3D resources (for PIX and debug layer leak reporting)Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.70: Fixed issue described in discussion #399087: variable references within case values weren't getting resolved.GoogleMap Control: GoogleMap Control 6.1: Some important bug fixes and couple of new features were added. There are no major changes to the sample website. Source code could be downloaded from the Source Code section selecting branch release-6.1. Thus just builds of GoogleMap Control are issued here in this release. Update 14.Oct.2012 - Client side access fixed NuGet Package GoogleMap Control 6.1 NuGet Package FeaturesBounds property to provide ability to create a map by center and bounds as well; Setting in markup <artem:Goog...mojoPortal: 2.3.9.3: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2393-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...New Projects1327on17jabbr: helloAESP: Projeto AESPAutoStor: Egyetemi kurzus keretében megvalósuló alkalmazás, melynek célja egy automatikus raktározó rendszer szimulációja, objektum-orientált megvalósítással.BetterPlaceBooking: 3rd semester project for DM76 Group 3BizMate: BizMate is a Web based Accounting systemDeneme: deneme yazisiDomainSharp: Integrated development environment for design of domain-specific languages and subsequent development in such languages.EasyTwitter: EasyTwitter it's a simple .NET library where you can use twitter in your web applications or win forms applications. EasyTwitter stills in developmentEDM Designer Extender: Entity Framework Designer Extender that provides new design time properties and a template item to generate DbContext classes.Formition Password Safe (Open Source): Formition Password Safe (Open Source) for Windows 7 is a free high functionality password tool to manage your passwords and other pieces of information.g1p2_web: sport club web site based on c# and mssqlGibbsLDASharp: GibbsLDASharp is a C# implementation of Latent Dirichlet Allocation (LDA) using Gibbs Sampling technique for parameter estimation and inference. Intelligent Assistant Soccer Manager: Intelligent Assistant Soccer Manager, or IASM for short, is a decision support system that fully support condition based deploy of Fantacalcio® soccer teamIshaanOnDAL: Creating DAL Using class ObjectKeks - A 2D Graphics Engine in Java (jre7): Keks is an upcoming Java 2D Graphics Engine with the promise to become a Game Engine in the future.LDR Installer: LDR Installer to easily install security updates in hotfix mode.Live SDK with C# + REST: Usar Live SDK com API REST em qualquer sabor de windows. Use Live SDK with REST API in any flavor of windows.MacSonuclari: project to show soccer match result to for windows phone devices mozcms: mozcms for .NET 4.0 MVC 4.0!MS_Descriptions_Changer: This is utility change MS_Descriptions attribute on MS SQL Server 2005-2008 for Tables and Columns.Onestop.Contrib.DistributedEvict: Onestop.Contrib.DistributedEvict is an advanced module that has 2 primary features for managing cache in a web farm: Output Cache Evict & Remote SignalsOrchard Scripting Extensions: Core module for running scripts inside Orchard.Orchard Scripting Extensions: PHP: A child module for Orchard Scripting Extensions for running PHP code inside Orchard.Page Generated Skin Object for DotNetNuke: The Page Generated Skin Object for DotNetNuke displays the time taken to generate the current page in your custom DNN skin. ProductStore: this project is demo for mvc4, ef codefirst...Remote Controlled Switch for all RC Receivers.: AVR Tiny based simple switch for any rc receiver. Allows to turn off / on lights, sound effect, retracts chassis, using free servo channel. Report Generator in C#: This is a library used to generate reports.Resharper text localization add-in: Text localization plugin for Resharper 7.0 and some plugins development documentationRoad Addicts: Road Addicts is a mix between a strategy and a traffic simulation game.Sistema Distribuido de Pedidos de Insumos Médicos: This is school projectSplitOS: SplitOS - The user-friendly Text OSSQL Server Connection Auditor (SSCA): SSCA helps you test your database audit solution's effectiveness at auditing Microsoft SQL Server connections by automating DB connections, results, and logs.TCP Cellular Radio Driver: Addresses TCP mode shortcomings in the CellularRadio driver provided by GHI Electronics for the Seeed module. Allows transparent data connection over TCP.test1325on17: hellotesttom10162012git01: fds fdsUMK Game: Game Edukasi 3D Tatatertib LalulintasWebMatrix Extension Documentation - Staging: WebMatrix Extensión Development ServiceWhipstaff: Whipstaff is a PoC library for designing a common UI library leveraging WPF, ReactiveUI and DHGMS Data Manager. It is written in C#Windows 8 Store Apps - Tutoriales Paso a Paso: No hay mejor forma de aprender a escribir código, que leyendo código de otros. Conocé aquí tutoriales completos para crear tu primer app para Windows 8 Store. Yet Another Expression Parser - Reverse Polish Notation - C#: Following project contains a class library with simple Reverse Polish Notation implementation.

    Read the article

  • Did 12.04 just add multi-touch gesture support mid-release?

    - by adempewolff
    I was reviewing the updates I was about to download today and I noticed that a lot of them had to do with gesture support, noticed that many of these were new installs rather than upgrades. Has 12.04 just added multi-touch gesture support mid-release? If so, what are the capabilities that this adds? Which applications already support these capabilities and can I expect others to add support in the near future? Here are the packages that were installed: Install: libframe6:amd64 (2.2.4-0ubuntu0.12.04.1), libgeis1:amd64 (2.2.9.2-0ubuntu1), libgrail5:amd64 (3.0.6-0ubuntu0.12.04.01, automatic) And here are those that were upgraded (also including many with touch support): Upgrade: libgrip0:amd64 (0.3.4-0ubuntu2~ubuntu12.04.1, 0.3.5-0ubuntu1~12.04.1), eog:amd64 (3.4.2-0ubuntu1, 3.4.2-0ubuntu1.1), ginn:amd64 (0.2.4-0ubuntu1, 0.2.4.1-0ubuntu1) Of which the descriptions for the new installs are, libgeis1: Gesture engine interface support A common API for clients of a systemwide gesture recognition and propagation engine. libframe6: Touch Frame Library This library handles the buildup and synchronization of a set of simultaneous touches. The library is input agnostic, with bindings for mtdev, frame and XI2.1. libgrail5: Gesture Recognition And Instantiation Library This library consists of an interface and tools for handling gesture recognition and gesture instantiation. Applications can use the grail callbacks to receive gesture primitives and raw input events from the underlying kernel device. And the descriptions for the upgraded packages are, ligrip0: provides multitouch gestures to GTK+ apps Libgrip hooks gesture recognition into GTK+ applications. ginn: Gesture Injector: No-GEIS, No-Toolkits A daemon with jinn-like wish-granting capabilities: it gives applications the ability to support a subset of multi-touch gestures without having to integrate GEIS or multi-touch GTK/Qt libs. Adding in a ton of new libraries and upgrading the existing components makes me wonder if 12.04 is meant to start natively supporting gestures other than two finger scroll in the near future. I expected these capabilities to be introduced soon but I thought that they would only be rolled out in a new release, not as upgrades for an existing release. Anyone have any info about this?

    Read the article

  • Installing LBP 2900 printer -> libs folders wrong?

    - by Peter Smit
    I am trying to get my Canon LBP2900 printer to work on Ubuntu 11.10 64 bit. What I have done is try to follow the steps on https://help.ubuntu.com/community/CanonCaptDrv190 So I downloaded the version 2.3 driver and tried to convert the rpm files to debian and installed them sudo alien cndrvcups-capt-2.30-1.x86_64.rpm cndrvcups-common-2.30-1.x86_64.rpm sudo dpkg -i cndrvcups-capt-2.30-1.x86_64.deb cndrvcups-common-2.30-1.x86_64.deb restarted cups and try to install the printer with lpadmin: sudo service cups restart sudo /usr/sbin/lpadmin -p LBP2900 -m /usr/share/cups/model/CNCUPSLBP2900CAPTK.ppd -v ccp://localhost:59787 -E What I noticed however that on the step with lpadmin it goes wrong with the error: lpadmin: Bad device-uri scheme "ccp" After trying to trace what has gone wrong, I think I nailed it to the fact that dpkg installed a file /usr/lib64/cups/backend/ccp instead of /usr/lib/cups/backend/ccp Checking the original rpm with archive manager shows indeed that /usr/lib and /usr/lib64 are used, with the backend/cpp file only installed in lib64. As I understand correctly, Ubuntu 11.10 uses /usr/lib32 and /usr/lib instead so the files are installed in the wrong place. Is there an automated method of converting the rpm/deb files with the wrong lib structure to one with the right lib structure for ubuntu 11.10? Or am I completely on the wrong track for getting my printer installed?

    Read the article

  • Blank Screen at boot Ubuntu 12.04 - nvidia-current - Macbook Air 3,2

    - by soulnafein
    I've installed nvidia-current using the Additional Drivers application in Ubuntu 12.04. I need those drivers so I can use accelerated WebGL. After installing the drivers, and rebooting X fails to start and I have a frozen system/dark screen. Below is the content of Xorg.0.log How can I fix this problem? [ 4.666] X.Org X Server 1.11.3 Release Date: 2011-12-16 [ 4.666] X Protocol Version 11, Revision 0 [ 4.666] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu [ 4.666] Current Operating System: Linux david-macbook-air 3.2.0-34-generic #53-Ubuntu SMP Thu Nov 15 10:48:16 UTC 2012 x86_64 [ 4.666] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-34-generic root=UUID=b3d5ae2a-72af-4ef9-b775-0d40b5f80f9b ro quiet splash vt.handoff=7 [ 4.666] Build Date: 29 August 2012 12:12:33AM [ 4.666] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support) [ 4.666] Current version of pixman: 0.24.4 [ 4.666] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 4.666] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 4.666] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 13 10:18:02 2012 [ 4.668] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 4.668] (==) No Layout section. Using the first Screen section. [ 4.668] (==) No screen section available. Using defaults. [ 4.668] (**) |-->Screen "Default Screen Section" (0) [ 4.668] (**) | |-->Monitor "<default monitor>" [ 4.668] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 4.668] (==) Automatically adding devices [ 4.668] (==) Automatically enabling devices [ 4.668] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 4.668] Entry deleted from font path. [ 4.668] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 4.668] Entry deleted from font path. [ 4.669] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 4.669] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 4.669] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 4.669] (II) Loader magic: 0x7f6222467b00 [ 4.669] (II) Module ABI versions: [ 4.669] X.Org ANSI C Emulation: 0.4 [ 4.669] X.Org Video Driver: 11.0 [ 4.669] X.Org XInput driver : 16.0 [ 4.669] X.Org Server Extension : 6.0 [ 4.670] (--) PCI:*(0:2:0:0) 10de:08a3:106b:00d3 rev 162, Mem @ 0x92000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x00001000/128, BIOS @ 0x????????/131072 [ 4.670] (II) Open ACPI successful (/var/run/acpid.socket) [ 4.670] (II) LoadModule: "extmod" [ 4.671] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 4.671] (II) Module extmod: vendor="X.Org Foundation" [ 4.671] compiled for 1.11.3, module version = 1.0.0 [ 4.671] Module class: X.Org Server Extension [ 4.671] ABI class: X.Org Server Extension, version 6.0 [ 4.671] (II) Loading extension MIT-SCREEN-SAVER [ 4.671] (II) Loading extension XFree86-VidModeExtension [ 4.671] (II) Loading extension XFree86-DGA [ 4.671] (II) Loading extension DPMS [ 4.671] (II) Loading extension XVideo [ 4.671] (II) Loading extension XVideo-MotionCompensation [ 4.671] (II) Loading extension X-Resource [ 4.671] (II) LoadModule: "dbe" [ 4.671] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 4.671] (II) Module dbe: vendor="X.Org Foundation" [ 4.671] compiled for 1.11.3, module version = 1.0.0 [ 4.671] Module class: X.Org Server Extension [ 4.671] ABI class: X.Org Server Extension, version 6.0 [ 4.671] (II) Loading extension DOUBLE-BUFFER [ 4.671] (II) LoadModule: "glx" [ 4.671] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 4.869] (II) Module glx: vendor="NVIDIA Corporation" [ 4.869] compiled for 4.0.2, module version = 1.0.0 [ 4.869] Module class: X.Org Server Extension [ 4.869] (II) NVIDIA GLX Module 295.40 Thu Apr 5 21:57:38 PDT 2012 [ 4.869] (II) Loading extension GLX [ 4.869] (II) LoadModule: "record" [ 4.870] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 4.870] (II) Module record: vendor="X.Org Foundation" [ 4.870] compiled for 1.11.3, module version = 1.13.0 [ 4.870] Module class: X.Org Server Extension [ 4.870] ABI class: X.Org Server Extension, version 6.0 [ 4.870] (II) Loading extension RECORD [ 4.870] (II) LoadModule: "dri" [ 4.870] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 4.870] (II) Module dri: vendor="X.Org Foundation" [ 4.870] compiled for 1.11.3, module version = 1.0.0 [ 4.870] ABI class: X.Org Server Extension, version 6.0 [ 4.870] (II) Loading extension XFree86-DRI [ 4.870] (II) LoadModule: "dri2" [ 4.871] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 4.871] (II) Module dri2: vendor="X.Org Foundation" [ 4.871] compiled for 1.11.3, module version = 1.2.0 [ 4.871] ABI class: X.Org Server Extension, version 6.0 [ 4.871] (II) Loading extension DRI2 [ 4.871] (==) Matched nvidia as autoconfigured driver 0 [ 4.871] (==) Matched nouveau as autoconfigured driver 1 [ 4.871] (==) Matched nv as autoconfigured driver 2 [ 4.871] (==) Matched vesa as autoconfigured driver 3 [ 4.871] (==) Matched fbdev as autoconfigured driver 4 [ 4.871] (==) Assigned the driver to the xf86ConfigLayout [ 4.871] (II) LoadModule: "nvidia" [ 4.871] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so [ 4.887] (II) Module nvidia: vendor="NVIDIA Corporation" [ 4.887] compiled for 4.0.2, module version = 1.0.0 [ 4.887] Module class: X.Org Video Driver [ 4.892] (II) LoadModule: "nouveau" [ 4.894] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 4.894] (II) Module nouveau: vendor="X.Org Foundation" [ 4.894] compiled for 1.11.3, module version = 1.0.2 [ 4.894] Module class: X.Org Video Driver [ 4.894] ABI class: X.Org Video Driver, version 11.0 [ 4.894] (II) LoadModule: "nv" [ 4.895] (WW) Warning, couldn't open module nv [ 4.895] (II) UnloadModule: "nv" [ 4.895] (II) Unloading nv [ 4.895] (EE) Failed to load module "nv" (module does not exist, 0) [ 4.895] (II) LoadModule: "vesa" [ 4.895] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 4.896] (II) Module vesa: vendor="X.Org Foundation" [ 4.896] compiled for 1.11.3, module version = 2.3.0 [ 4.896] Module class: X.Org Video Driver [ 4.896] ABI class: X.Org Video Driver, version 11.0 [ 4.896] (II) LoadModule: "fbdev" [ 4.896] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 4.896] (II) Module fbdev: vendor="X.Org Foundation" [ 4.896] compiled for 1.11.3, module version = 0.4.2 [ 4.896] ABI class: X.Org Video Driver, version 11.0 [ 4.896] (==) Matched nvidia as autoconfigured driver 0 [ 4.896] (==) Matched nouveau as autoconfigured driver 1 [ 4.896] (==) Matched nv as autoconfigured driver 2 [ 4.896] (==) Matched vesa as autoconfigured driver 3 [ 4.896] (==) Matched fbdev as autoconfigured driver 4 [ 4.896] (==) Assigned the driver to the xf86ConfigLayout [ 4.896] (II) LoadModule: "nvidia" [ 4.896] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so [ 4.896] (II) Module nvidia: vendor="NVIDIA Corporation" [ 4.896] compiled for 4.0.2, module version = 1.0.0 [ 4.896] Module class: X.Org Video Driver [ 4.896] (II) UnloadModule: "nvidia" [ 4.896] (II) Unloading nvidia [ 4.896] (II) Failed to load module "nvidia" (already loaded, 32610) [ 4.896] (II) LoadModule: "nouveau" [ 4.897] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 4.897] (II) Module nouveau: vendor="X.Org Foundation" [ 4.897] compiled for 1.11.3, module version = 1.0.2 [ 4.897] Module class: X.Org Video Driver [ 4.897] ABI class: X.Org Video Driver, version 11.0 [ 4.897] (II) UnloadModule: "nouveau" [ 4.897] (II) Unloading nouveau [ 4.897] (II) Failed to load module "nouveau" (already loaded, 32610) [ 4.897] (II) LoadModule: "nv" [ 4.897] (WW) Warning, couldn't open module nv [ 4.897] (II) UnloadModule: "nv" [ 4.897] (II) Unloading nv [ 4.897] (EE) Failed to load module "nv" (module does not exist, 0) [ 4.897] (II) LoadModule: "vesa" [ 4.898] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 4.898] (II) Module vesa: vendor="X.Org Foundation" [ 4.898] compiled for 1.11.3, module version = 2.3.0 [ 4.898] Module class: X.Org Video Driver [ 4.898] ABI class: X.Org Video Driver, version 11.0 [ 4.898] (II) UnloadModule: "vesa" [ 4.898] (II) Unloading vesa [ 4.898] (II) Failed to load module "vesa" (already loaded, 0) [ 4.898] (II) LoadModule: "fbdev" [ 4.898] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 4.898] (II) Module fbdev: vendor="X.Org Foundation" [ 4.898] compiled for 1.11.3, module version = 0.4.2 [ 4.898] ABI class: X.Org Video Driver, version 11.0 [ 4.898] (II) UnloadModule: "fbdev" [ 4.898] (II) Unloading fbdev [ 4.899] (II) Failed to load module "fbdev" (already loaded, 0) [ 4.899] (II) NVIDIA dlloader X Driver 295.40 Thu Apr 5 21:38:35 PDT 2012 [ 4.899] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 4.899] (II) NOUVEAU driver Date: Wed Sep 12 13:42:43 2012 +0200 [ 4.899] (II) NOUVEAU driver for NVIDIA chipset families : [ 4.899] RIVA TNT (NV04) [ 4.899] RIVA TNT2 (NV05) [ 4.899] GeForce 256 (NV10) [ 4.899] GeForce 2 (NV11, NV15) [ 4.899] GeForce 4MX (NV17, NV18) [ 4.899] GeForce 3 (NV20) [ 4.900] GeForce 4Ti (NV25, NV28) [ 4.900] GeForce FX (NV3x) [ 4.900] GeForce 6 (NV4x) [ 4.900] GeForce 7 (G7x) [ 4.900] GeForce 8 (G8x) [ 4.900] GeForce GTX 200 (NVA0) [ 4.900] GeForce GTX 400 (NVC0) [ 4.900] (II) VESA: driver for VESA chipsets: vesa [ 4.900] (II) FBDEV: driver for framebuffer: fbdev [ 4.900] (++) using VT number 7 [ 4.902] (II) Loading sub module "fb" [ 4.902] (II) LoadModule: "fb" [ 4.902] (II) Loading /usr/lib/xorg/modules/libfb.so [ 4.902] (II) Module fb: vendor="X.Org Foundation" [ 4.902] compiled for 1.11.3, module version = 1.0.0 [ 4.902] ABI class: X.Org ANSI C Emulation, version 0.4 [ 4.902] (II) Loading sub module "wfb" [ 4.902] (II) LoadModule: "wfb" [ 4.903] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 4.905] (II) Module wfb: vendor="X.Org Foundation" [ 4.905] compiled for 1.11.3, module version = 1.0.0 [ 4.905] ABI class: X.Org ANSI C Emulation, version 0.4 [ 4.905] (II) Loading sub module "ramdac" [ 4.905] (II) LoadModule: "ramdac" [ 4.905] (II) Module "ramdac" already built-in [ 4.907] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so [ 4.907] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 4.907] (II) Loading /usr/lib/xorg/modules/libfb.so [ 4.912] (WW) Falling back to old probe method for vesa [ 4.912] (WW) Falling back to old probe method for fbdev [ 4.912] (II) Loading sub module "fbdevhw" [ 4.912] (II) LoadModule: "fbdevhw" [ 4.912] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 4.912] (II) Module fbdevhw: vendor="X.Org Foundation" [ 4.912] compiled for 1.11.3, module version = 0.0.2 [ 4.912] ABI class: X.Org Video Driver, version 11.0 [ 4.912] (II) NVIDIA(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 4.912] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32 [ 4.912] (==) NVIDIA(0): RGB weight 888 [ 4.912] (==) NVIDIA(0): Default visual is TrueColor [ 4.912] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 4.912] (**) NVIDIA(0): Enabling 2D acceleration [ 5.442] (EE) NVIDIA(0): Failed to initialize the display subsystem for the NVIDIA [ 5.442] (EE) NVIDIA(0): graphics device! [ 5.442] (EE) NVIDIA(0): Failed to get supported display device(s) [ 5.442] (EE) NVIDIA(0): Failed to initialize dac HAL [ 5.442] (II) UnloadModule: "nvidia" [ 5.442] (II) Unloading nvidia [ 5.442] (II) UnloadModule: "wfb" [ 5.442] (II) Unloading wfb [ 5.442] (II) UnloadModule: "fb" [ 5.443] (II) Unloading fb [ 5.443] (EE) Screen(s) found, but none have a usable configuration. [ 5.443] Fatal server error: [ 5.443] no screens found [ 5.443] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 5.443] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 5.443] [ 5.447] ddxSigGiveUp: Closing log [ 5.447] Server terminated with error (1). Closing log file.

    Read the article

  • Developing Ext JS Charts in NetBeans IDE

    - by Geertjan
    I took my first tentative steps into the world of Ext JS charts today, in NetBeans IDE 7.4. Click to enlarge the image. I will make a screencast soon showing how charts such as the above can be created with NetBeans IDE and Ext JS. Setting up Ext JS is easy in NetBeans IDE because there's a JavaScript library browser, by means of which I can browse for the Ext JS libraries that I need and then NetBeans IDE sets up the project for me. The JavaScript code shown above comes directly from here: http://www.quizzpot.com/courses/learning-ext-js-3/articles/chart-series The index.html is as follows: <html> <head> <title>TODO supply a title</title> <meta charset="UTF-8"> <meta name="viewport" content="width=device-width"> <link rel="stylesheet" href="js/libs/extjs/resources/css/ext-all.css"/> <script src="js/libs/ext-core/ext-core.js"></script> <script src="js/libs/extjs/adapter/ext/ext-base-debug.js"></script> <script src="js/libs/extjs/ext-all-debug.js"></script> <script src="app.js"></script> </head> <body> </body> </html> More info on Ext JS: http://docs.sencha.com/extjs/4.1.3/ By the way, quite a few other articles are out there on Ext JS and NetBeans IDE, such as these, which I will be learning from during the coming days: http://netbeans.dzone.com/extjs-rest-netbeans http://netbeans.dzone.com/articles/create-your-first-extjs-4 http://netbeans.dzone.com/articles/mixing-extjs-json-p-and-java

    Read the article

  • Upgrade from 11.04 to 12.04 failed - unable to login

    - by Tobias M.
    Yesterday i updgraded from 10.04 to 12.04 via the update-manager. At the end it said "Failed to upgrade due to too many errors". Before that i got a lot of error messages that said packages could ne configured - they were all related to mono. Then it force me to restart. When booting now, I see the pink screen (without logo). After that it turns black and the cursor appears. Then its falshing around between beeing bright and dark and showing the cursor and not showing it. But no way i see the login-screen. At the moment i am not able to boot frm usb since my usb device is too large to be formated to FAT-32 (8GB). This all is happening on this machine: AMD E-350 Processor (2x1,65Ghz) 4GB DDR3 RAM 320GB SATA II Hard drive AMD® Radeon™ HD 6320 Thanks in advance to everyone who trys helping me ;) I have to continue working with data from this machine so i´d be pleased to get my data accessible. Greets ;)

    Read the article

  • Here Is Official GMail App For iPhones & iPads

    - by Gopinath
    Its a great day for GMail users! Few hours ago Google pushed a new GMail web user interface to all the users and now they released GMail iOS App[iTunes Link]. After delaying several years Google at last released a native GMail application of iPhone, iPad & iPod touch. In a blog post, Google says We’ve combined your favorite features from the Gmail mobile web app and iOS into one app so you can be more productive on the go.It’s designed to be fast, efficient and take full advantage of the touchscreen and notification capabilities of your device. The iOS App includes almost all the features that are found on Android version of GMail app -  users can star, label, archive, access the Priority Inbox and push notifications for new mail alerts. It also includes standard touchscreen commands like pull down to refresh and swipe to scroll emails. Go and grab the GMail App from iTunes This article titled,Here Is Official GMail App For iPhones & iPads, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • Can't Mount Phone, "according to mtab, /dev/sdb1 is already mounted on /"

    - by RPG Master
    My myTouch Slide wasn't mounting, so I decided to open Disk Utility. My phone shows up but when I click "Mount" it gives me this error: Error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on / mount failed Here's my mtab: /dev/sdb1 / ext4 rw,errors=remount-ro,commit=0 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 none /sys sysfs rw,noexec,nosuid,nodev 0 0 fusectl /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 none /dev devtmpfs rw,mode=0755 0 0 none /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 none /dev/shm tmpfs rw,nosuid,nodev 0 0 none /var/run tmpfs rw,nosuid,mode=0755 0 0 none /var/lock tmpfs rw,noexec,nosuid,nodev 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/matthew/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=matthew 0 0 /dev/sdg1 /media/Seagate\040GoFlex ext4 rw,nosuid,nodev,uhelper=udisks 0 0 EDIT: Here's my fstab: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=3b0db205-2bdb-4c98-a506-6bdd3520d540 none swap sw 0 0

    Read the article

  • How to diagnose network speed drops

    - by Luis Alvarado
    Here is the image of System Monitor first: The graph shows the cycle the connection goes through. After 10 to 15 seconds it drops to 0 KB/S, then goes up to the Max speed (120 KB/S) then it repeats. dmesg shows the following during that time: [ 6066.757211] wlan0: send auth to 00:26:5a:b5:05:7b (try 1/3) [ 6066.804405] wlan0: authenticated [ 6066.804578] rt2800pci 0000:02:01.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 6066.805016] wlan0: associate with 00:26:5a:b5:05:7b (try 1/3) [ 6066.809218] wlan0: RX AssocResp from 00:26:5a:b5:05:7b (capab=0x431 status=0 aid=1) [ 6066.809581] wlan0: associated [ 6066.810203] bridge-eth0: disabling the bridge on dev down [ 6066.810239] bridge-eth0: down [ 6066.810254] bridge-eth0: detached [ 6066.810309] /dev/vmnet: open called by PID 1679 (vmnet-bridge) [ 6066.810322] /dev/vmnet: hub 0 does not exist, allocating memory. [ 6066.810355] /dev/vmnet: port on hub 0 successfully opened [ 6066.810366] bridge-wlan0: device is wireless, enabling SMAC [ 6066.810369] bridge-wlan0: up [ 6066.810372] bridge-wlan0: attached [ 6067.010285] userif-2: sent link down event. [ 6067.010290] userif-2: sent link up event. This also repeats with Wired or Wireless connections. How can I diagnose this changes in the network efficiently.

    Read the article

  • Use Network-Manager to Connect to a wifi Access Point on the command-line

    - by Stefano Palazzo
    I'd like to connect to a wireless access point from the command-line. ideally, I'd only need the name of the AP. But the hardware-address would work as well. I know I can use nmcli to connect to a managed network connection, but in my case, the access point may not be configured for Network-Manager yet (See the difference between the output of nm-tool and nmcli con). Example output of nmcli: Auto pwln 3a3d62b1-bbdf-4f76-b4d2-c211fd5cfb03 802-11-wireless [...] Wired Network aa586921-accf-4932-98c4-c873c310f08e 802-3-ethernet [...] Cisco-UDP Uni 7f94847b-04dc-40b7-9955-5246fb77cc65 vpn [...] T-mobile (D1) 867f345a-cbbf-4bd4-b883-a5e5ae0932f0 gsm [...] Example output of nm-tool: State: connected - Device: eth1 [Auto pwln] ---------------------------------------------------- [...] Wireless Access Points (* = current AP) *pwln: Infra, [...], Freq 2472 MHz, Rate 54 Mb/s, Strength 80 WPA WPA2 WLAN: Infra, [...], Freq 2422 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 [...] How do I connect to an access point that may or may not be known to NM? Extra: Finding out if the connection needs a pass-phrase, and submitting it on the command-line as well would be great too (that is to say It'd be nice if network-manager wouldn't pop open any keyring dialogues or errors on the gui)

    Read the article

  • BCM4306, b43 legacy driver installed, but "firmware missing" error

    - by ScrollerBlaster
    I have the following wireless hardware on a Compaq evo N600c laptop running lubuntu latest. ciaran@compaq:~$ lspci -vvnn | grep 14e4 03:00.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03) Following the instructions from here : http://www.linuxwireless.org/en/users/Drivers/b43#b43_and_b43legacy I opted for the legacy firmware installer, following instructions for internet install to the letter (with no errors). i.e. I successfully installed sudo apt-get install firmware-b43legacy-installer In the nm-applet I now get Wireless networks device not ready (firmware missing) I open up Additional Drivers, but the list is empty. I have commented out this line in /etc/modprobe.d/blacklist.conf #blacklist bcm43xx Contents of firmware dir: ciaran@compaq:/etc/modprobe.d$ sudo ls /lib/firmware/b43legacy/ [sudo] password for ciaran: a0g0bsinitvals2.fw a0g0initvals5.fw b0g0bsinitvals2.fw b0g0initvals5.fw ucode11.fw ucode5.fw a0g0bsinitvals5.fw a0g1bsinitvals5.fw b0g0bsinitvals5.fw pcm4.fw ucode2.fw a0g0initvals2.fw a0g1initvals5.fw b0g0initvals2.fw pcm5.fw ucode4.fw Edit: from dmesg: [ 4460.193382] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 4460.193393] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 4460.193401] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. Yours in hope.

    Read the article

  • Bad DMA/do_IRQ errors on suspend/resume, with occasional freezing

    - by Steve Kroon
    Every time I suspend or resume my laptop (Dell Latitude E6520, bought this year), I get 2 messages of the form displayed on the console just before shutting down/starting up: [ 407.107610] ehci_hcd 0000:00:1d.0: dma_pool_free buffer-128, f6f18000/36f18000 (bad dma) On occasion, I get a message of the form: [ 3753.979066] do_IRQ: 0.177 No irq handler for vector (irq -1) On occasion, my machine freezes with a flashing Caps Lock button when suspending, after which I need to do a hard shutdown. This never happened before the messages started appearing (a while back), and I think it never happens without a do_IRQ message appearing (although I'm not sure about that). [There's nothing in the owner's manual on a flashing Caps Lock button; apparently it may be a kernel panic if the scroll lock also flashes, but the laptop doesn't have a scroll lock light, and there's no message on the console saying kernel panic.] Are these bad DMA/do IRQ messages serious, and what can I do to investigate/troubleshoot them and the freezing? Edit: I've also now received the following error messages a few times: [246943.023908] JBD: I/O error detected when updating journal superblock for sdb1. [246943.023958] Buffer I/O error on device sdb1, logical block 0 [246943.023996] EXT3-fs (sdb1): I/O error while writing superblock Edit: Output of dmesg at http://pastebin.com/ra7MTQEj ; contents of /var/log/kern.log at http://pastebin.com/i6jf0Md9 Edit: the output of some smartctl (-a, -x, --log=error, --log=xerror) instructions is available at http://paste.ubuntu.com/1088488/ . Edit (31/8/2012): Output of dmesg|grep -i ehci available at http://paste.ubuntu.com/1177246/ .

    Read the article

  • Reboot failure after upgrade from 8.04 LTS to 10.04 LTS

    - by Alan Fietz
    I bought our computer from Freegeeks with Ubuntu 8.04 installed. I upgraded from Ubuntu 8.04 to 10.04 on Thursday November 10. I have an ASUS P4P800SE with dual Intel P4@3GHZ. Installation messages were: - Error loading Nautilus config info - Replaced customied /etc/login.defs - Replaced customized /etc/dhcp3/dhclient.conf - 189 packages removed - WARNING: Failed to read mirror file When I rebooted, the usual ASUS screen appeared, then "Loading GRUB" then "starting Up..." then "starting Up..." again then a blank screen (the moniter went dormant). I rebooted, started GRUB and selected: version 10.04.3 LTS kernel 2.6.32-35 generic I got the same results. I rebooted, started GRUB and selected: kernel 2.6.24-29 generic Here's what was displayed: udevd [875]: error getting socket: Invalid argument libudev:udev_monitor_new_from_netlink: error getting socket: Invalid argument Segmentation fault **Gave up waiting for root device** Common problems - Boot args (cat/proc/cmdline) - Check root delay - check root - Missing modules (cat/pro/modules; **Alert! /dev/disk/by_vvid/c59c6361 etc... does not exist. Dropping to a shell.** Then Busybox v1.13.3 started with the following prompt (?) (initramfs) _ But my typing did not appear on the screen. It appears the hard drive cannot be found. Any suggestion on how to remedy this? Thank you.

    Read the article

  • Why does 12.04 upgrade abort with out of space error when I have lots of it?

    - by Kristian Thomsen
    When upgrading Ubuntu from 11.10 to 12.04 I discovered an unexpected problem. The upgrade was stopped because there wasn't enough free space for the installation. I managed to free some space and do the upgrade but now a prompt appears after logging in saying I'm out of space. This prompt asks me if I want to examine the problem. The "Disk Usage Analyser" is opened. In the top it says: Total filesystem capacity: 47.0 GB (used: 13.5 GB available: 33.4 GB) Folder -- Usage -- Size / -- 100% -- 12.5 GB usr -- 44.8 % -- 5.6 GB home -- 30.3 % -- 3.8 GB lib -- 13.0 % -- 1.6 GB var -- 9.1 % -- 1.1 GB boot 2.5 % 309.5 GB and a lot of small contributors like: etc, opt, sbin, bin etc. I do not really understand this problem since the analyser in the top says that I have 33.4 GB left in this file system. What can I do to make Ubuntu use the remaining space? Running df -i in the terminal gives: Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda7 610800 576874 33926 95% / udev 213451 563 212888 1% /dev tmpfs 218524 486 218038 1% /run none 218524 3 218521 1% /run/lock none 218524 7 218517 1% /run/shm /dev/sda8 2264752 16371 2248381 1% /home The output of df -h Filesystem Size Used Avail Use% Mounted on /dev/sda7 9,3G 7,8G 1,1G 88% / udev 993M 4,0K 993M 1% /dev tmpfs 401M 884K 400M 1% /run none 5,0M 0 5,0M 0% /run/lock none 1003M 152K 1002M 1% /run/shm /dev/sda8 35G 4,0G 29G 13% /home /dev/sda2 101G 64G 37G 64% /media/A2C8E28BC8E25CD3 Running sudo fdisk -l gives Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000080 Device Boot Start End Blocks Id System /dev/sda1 63 96389 48163+ de Dell Utility /dev/sda2 * 98304 210434488 105168092+ 7 HPFS/NTFS/exFAT /dev/sda3 210436094 312576704 51070305+ f W95 Ext'd (LBA) /dev/sda5 306279288 312576704 3148708+ dd Unknown /dev/sda6 210436096 214341631 1952768 82 Linux swap / Solaris /dev/sda7 214343680 233873407 9764864 83 Linux /dev/sda8 233875456 306278399 36201472 83 Linux Partition table entries are not in disk order

    Read the article

  • LiveCD Boot/Install

    - by Jon
    I have recently built a new computer and have been looking to dual-boot alongside Windows. Trying to boot/install off Ubuntu/Dedora/Arch live CDs has failed across all distros and I keep getting the error: [34.5173939] ata9.00: exception Emask 0x52 SAct 0x1 SErr 0xffffffff action 0xe frozen [34.517403] ata9: SError: {RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns UnrecFIR DevExch } [34.517413] ata9.00: failed command: READ FPDMA QUEUED [34.517420] ata9.00: cmd 60/08:00:00:6d:70/00:00:74:00:00/40 tag 0 ncq 4096 in [34.517420] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [34.517433] ata9.00: status: { DRDY } [34.667134] ata10.00 exception Emask 0x52 SAct 0x1 SErr 0xffffffff action 0xe frozen [34.667134] ata10: SError: {RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns UnrecFIR DevExch } [34.667153] ata10.00: failed command: IDENTIFY PACKET DEVICE [34.667159] ata10.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [34.667160] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [34.667170] ata10.00: status: { DRDY } I am using a new ASUS Z77 Sabertooth motherboard with a Seagate Barracuda ST1000DM003 1TB 7200RPM hard drive. I am not entirely sure why I can't even boot off the live CD? Any ideas? Hi thanks for the quick response. All Distros were direct download from their respective websites, I have tried both CD boot with all distros and USB boot with Arch only. I have just updated my BIOS as well an am still receiving the same error. The fact that it happens on CD and USB tell's me it's not an optical drive issue. All information I can find on this seems to relate to hard drives failing on already installed linux boxes or faulty SATA cables. I am a bit confused why this issue would be preventing a CD/USB boot though. Is there any more info I can provide that might help uncover the source of the problem? Cheers, Jon

    Read the article

  • Blogging from Office RT

    - by Dennis Vroegop
    During the last Build conference all attendees were given a brand new sparkling exciting Surface RT device (I love that machine despite its name but that's beside the point). On it came a version of Office 2013 RT, or better: the preview version. Now, I translated that term "Preview" to "Beta". Which is OK, since I've been using a lot of beta products from Microsoft and they all were great. And then I wanted to post a blogposting from Word. I knew I could, I have been doing this for a long time (I prefer Live Writer but that isn't available on Windows 8 RT). So I wrote the entry and hit "Publish". Instead of my blogsite I got a nice non-descriptive error telling me I couldn't post. So I fired up my other (Intel based) Win8 tablet, opened Word RT Preview, it loaded my blogpost (you've got to love the automatic synchronization through Skydrive) and tried from that machine. Same error. So, I installed Live Writer (remember, the other machine is Intel based) and posted from there. That worked like a charm. Apparently, there was something wrong with Word. I gave up and didn't think about it anymore. Yet… what you're reading now is written in Word 2013 RT on my Surface RT. So what did do? Simple: I updated from the Preview version to the final version. That's all there was to it. So…. If you're still on the preview I urge you to upgrade. You need to go to the "classic desktop update" window instead of going through the Windows Store App style update since Office is a desktop system, but once you do that you'll have the full version as well. Happy blogging!

    Read the article

< Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >