Search Results

Search found 2187 results on 88 pages for 'ends'.

Page 34/88 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • Network: Incoming connections work, outgoing fails

    - by anirvan
    i recently set up my own server at home to run Ubuntu 12.04 server ed. on booting up, i noticed that a message related to networking comes up, and the booting process pauses. the message read something like - waiting for network configuration and after a while - waiting another 60 seconds... on booting up, I realised that any command which requires a network connection was not working - ping, apt-get install, etc. on firing the ifup eth0 command, I get the error RTNETLINK answers: File exists. Failed to bring up eth0. I also realised, while searching the web for this problem, that this is probably one of the most common networking related issues - however, most of the questions are around setting up multiple IPs for the same machine. ifdown eth0 also fails, stating that eth0 is not configured. my /etc/network/interfaces file has a simple configuration for a static IP: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask xx.xx.xx.xx broadcast xx.xx.xx.xx gateway xx.xx.xx.xx dns-nameservers xx.xx.xx.xx The strangest part of this problem is that, while I can't connect to anything outside, I can ping to this particular server using the static IP configured in the interface file, and, i can even SSH into it! I'm really at ends here with this problem, and any guidance is much appreciated. Thanks!

    Read the article

  • How to manage and estimate unstructured requirements received from customers

    - by user20358
    A lot of the times I receive a software system's requirements from our customers in a very unstructured format. It is usually a bunch of "product development" guys from the customer's who come up with these "proposed solutions" to the business problems they have. While they are the experts at the business domain, a lot of the times they don't have the solutions right. This results in multiple versions of the same requirement mixing up of two requirements into one a few versions of the requirement later down the line, the requirements which were combined together get separated out again, each taking with it some of the new additions How do you work with such requirements coming in and sort them out into proper use cases and before development begins? What tools can we use to track a particular requirement's history, from the first time it was conceived till the time it gets crystallized into a proper use case? Estimating work against requirements received in such a fashion is a nightmare which ends up in making mistakes in understanding the requirement correctly and estimating the effort against it correctly. Any tips, tools, tricks to make this activity more manageable? I'm just trying to get some insights from someone more experienced than I am in requirements management and effort estimation.

    Read the article

  • Music player with a few specific requirements

    - by Jordan Uggla
    I am looking for a music player with a few specific requirements: Must have a search function that whittles down results as you type, searching the entire library. Must start playing a song when double clicked, and not continue to another song when that song finishes. Must be approachable and immediately usable by people completely unfamiliar with the program. I think this is mostly covered by the first two requirements being met. I've tried many players but unfortunately every one has failed to meet at least one of the requirements. Rhythmbox meets 1 and 3, but continues to the next search result after the song which was double clicked ends. Banshee is basically the same as Rhythmbox. While it has an option to "Stop when finished" this cannot (as far as I can tell) be made the default when double clicking a song. Audacious (as far as I can tell) fails at 1. Muine meets requirements 1 and 2, but unfortunately I couldn't make the search dialog always shown like it is with Rhythmbox / Banshee which, despite its very simple interface, made Muine incomprehensible to people trying to use it for the first time. Amarok I could not configure to meet requirement 1, but I think it's likely I was just missing something, and with its configurability I'm confident that I can set it up to meet requirements 2 and 3.

    Read the article

  • How to promote an open-source project?

    - by Shehi
    First of all, I apologize if this is the wrong section of network to post this question. If it is, please feel free to move it to more appropriate location... Question: I would like to hear your ideas regarding the ways of open source projects being started and run. I have an open-source content management system project and here some questions arise: How should I act? Shall I come up with a viable pre-alpha edition with working front- and back-ends first and then announce the project publicly? Or shall I announce it right away from the scratch? As a developer I know that one should use versioning system like Git or SVN, which I do, no problems there. And the merit of unit-testing is also something to remember, which, to be frank, I am not into at all... Project management - I am a beginner in that, at best. Coding techniques and experiences such as Agile development is something I want to explore... In short, any ideas for a developer who is new to open-source world, is most welcome.

    Read the article

  • Ubuntu Server 11.10 boot, white terminal with garbled black text

    - by SpeedCrazy
    I just installed Ubuntu server 11.10 and the install went fine. This system is running on an Intel Pentium II board with onboard graphics. However when I try to boot into Ubuntu I get a white terminal with garbled black text. I have tried various grub 'fixes' as googling the issue seemed to suggest it was a res or grub related issue. I cannot ssh in so the issue does affect Linux as well. I have had no luck with anything thus far and am at my wits end. This was my first Ubuntu excursion as my friend told me it was better for servers than CentOS because it was easier... Not so much.... Does anyone have any ideas as to what the issue could be? When answering bear in mind I am an Ubuntu noob and Linux novice. As of 1/26/12 I have tried to add the console=ttyl line to the /etc/default/grub and run update-grub. This results in the line in the boot parameters that normally reads: linux /vmlunz-3.0.0-12-generic-pae root=/dev/mapper/dev-root rovt.handoff=7 now reads: linux /vmlunz-3.0.0-12-generic-pae root=/dev/mapper/dev-root ro console=ttyl vt.handoff=7 This does not work. Is there anyway to have console=ttyl inserted on a line by itself? I am at my wits ends, Thanks for all your help, Speed

    Read the article

  • How to determine if a 3D voxel-based room is sealed, efficiently

    - by NigelMan1010
    I've been having some issues with efficiently determining if large rooms are sealed in a voxel-based 3D rooms. I'm at a point where I have tried my hardest to solve the problem without asking for help, but not tried enough to give up, so I'm asking for help. To clarify, sealed being that there are no holes in the room. There are oxygen sealers, which check if the room is sealed, and seal depending on the oxygen input level. Right now, this is how I'm doing it: Starting at the block above the sealer tile (the vent is on the sealer's top face), recursively loop through in all 6 adjacent directions If the adjacent tile is a full, non-vacuum tile, continue through the loop If the adjacent tile is not full, or is a vacuum tile, check if it's adjacent blocks are, recursively. Each time a tile is checked, decrement a counter If the count hits zero, if the last block is adjacent to a vacuum tile, return that the area is unsealed If the count hits zero and the last block is not a vacuum tile, or the recursive loop ends (no vacuum tiles left) before the counter is zero, the area is sealed If the area is not sealed, run the loop again with some changes: Checking adjacent blocks for "breathable air" tile instead of a vacuum tile Instead of using a decrementing counter, continue until no adjacent "breathable air" tiles are found. Once loop is finished, set each checked block to a vacuum tile. Here's the code I'm using: http://pastebin.com/NimyKncC The problem: I'm running this check every 3 seconds, sometimes a sealer will have to loop through hundreds of blocks, and a large world with many oxygen sealers, these multiple recursive loops every few seconds can be very hard on the CPU. I was wondering if anyone with more experience with optimization can give me a hand, or at least point me in the right direction. Thanks a bunch.

    Read the article

  • Laptop Display Not Working

    - by etrask
    Hello, I just purchased this laptop. It is working fine but I want to use Xubuntu on it. I managed to get 10.04 installed and running but it did not recognize/use the wireless card. So I want to try 10.10. However, every time I try, the screen goes black and never comes back on. I have tried the Live CD and Alternate install CDs, for both Ubuntu and Xubuntu 10.10. After I select "Install Ubuntu" or "Try Ubuntu", the screen blacks out and never displays anything. So I deleted "quiet" and "splash" off the command line to see what messages would come up. A bunch of text flies by but it ends at: [time] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [time] TCP bind hash table entries 65536 (order: 8, 1048576 bytes) [time] TCP: Hash tables configured (established 524288 bind 65536) [time] TCP reno registered [time] UDP hash table entries: 2048 (order: 4, 65536 bytes) [time] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [time] NET: Registered protocol family 1 And freezes here forever. I have tried nomodeset, vga=771, and xforcevesa with no progress. Is my video card simply not going to work with this distro? It seems strange that 10.04 would work fine but not 10.10. Any help is appreciated, thank you.

    Read the article

  • Tracking Outgoing Links With Google Analytics Events

    - by the_archer
    I've been trying to track clicks on external links on my website using the events tracking method. So I've got my Google Analytics code setup before body ends as shown below (note: quotes have been entitied by blogger, but it works fine): <script type='text/javascript'> var _gaq = _gaq || []; _gaq.push([&#39;_setAccount&#39;, &#39;UA-XXXXXXX-X#39;]); _gaq.push([&#39;_trackPageview&#39;]); (function() { var ga = document.createElement(&#39;script&#39;); ga.type = &#39;text/javascript&#39;; ga.async = true; ga.src = (&#39;https:&#39; == document.location.protocol ? &#39;https://ssl&#39; : &#39;http://www&#39;) + &#39;.google-analytics.com/ga.js&#39;; var s = document.getElementsByTagName(&#39;script&#39;)[0]; s.parentNode.insertBefore(ga, s); })(); </script> Now I wanted to track a link on the addthis.com follow widget. So there is a link of the type below to which following instructions from here I added the onclick event. <a addthis:url='http://feeds.feedburner.com/myfeedburnerlurl' onClick="_gaq.push(['_trackEvent', 'Subscription Clicks', 'RSS']);" class='addthis_button_rss_follow'/> I clicked on it a couple of times, left it for over a day now, but nothing shows up in google analytics events. It just says zero events. Here's a screenshot of the events page on GA: Could anybody help me? Am I doing anything wrong?

    Read the article

  • "Programming error" exceptions - Is my approach sound?

    - by Medo42
    I am currently trying to improve my use of exceptions, and found the important distinction between exceptions that signify programming errors (e.g. someone passed null as argument, or called a method on an object after it was disposed) and those that signify a failure in the operation that is not the caller's fault (e.g. an I/O exception). As far as I understand, it makes little sense for an immediate caller to actually handle programming error exceptions, he should instead assure that the preconditions are met. Only "outer" exception handlers at task boundaries should catch them, so they can keep the system running if a task fails. In order to ensure that client code can cleanly catch "failure" exceptions without catching error exceptions by mistake, I create my own exception classes for all failure exceptions now, and document them in the methods that throw them. I would make them checked exceptions in Java. Now I have a few questions: Before, I tried to document all exceptions that a method could throw, but that sometimes creates an unwiedly list that needs to be documented in every method up the call chain until you can show that the error won't happen. Instead, I document the preconditions in the summary / parameter descriptions and don't even mention what happens if they are not met. The idea is that people should not try to catch these exceptions explicitly anyway, so there is no need to document their types. Would you agree that this is enough? Going further, do you think all preconditions even need to be documented for every method? For example, calling methods in IDisposable objects after calling Dispose is an error, but since IDisposable is such a widely used interface, can I just assume a programmer will know this? A similar case is with reference type parameters where passing null makes no conceivable sense: Should I document "non-null" anyway? IMO, documentation should only cover things that are not obvious, but I am not sure where "obvious" ends.

    Read the article

  • Install a i386 printer driver into an amd64 distribution or how can I find a good printer based on features?

    - by Yanick Rochon
    Hi, I just bought a Lexmark Interpret S408 all-in-one printer. The box said that it supported Ubuntu 8.04, but I told myself it should work with Lucid... well no. The only driver I have found is for i386 while I have a amd64 image installed; the architecture is incompatible. So, the quesiton is : Is it possible to install that driver anyway, somehow? Or do I need to take that printer back to the store and buy another one? If the latter is the only alternative, I need a printer that has wireless connection capability can do color printing is of good price (less than $200 CAD) Thank you for your answers, help, and tips. ** UPDATE ** The driver was given in the form of deb package (for Debian distributions) and I managed to extract the actual deb package driver out of the install program. I ran sudo dpkg -i --force-all lexmark-inkjet-09-driver-1.5-1.i386.deb and the driver installed, and I was able to print something out. But that pretty much ends there; I cannot access anymore of the printer settings, etc. (i.g. scanner, fax, wifi settings, etc.) I should suffice for now as I'm satisfied with the printer's features (and size, and prince), but if I could have a full-linux-supported printer like that one, I would return this one in exchange for the other.

    Read the article

  • Is there really anything to gain with complex design? [duplicate]

    - by SB2055
    This question already has an answer here: What is enterprise software, exactly? 8 answers I've been working for a consulting firm for some time, with clients of various sizes, and I've seen web applications ranging in complexity from really simple: MVC Service Layer EF DB To really complex: MVC UoW DI / IoC Repository Service UI Tests Unit Tests Integration Tests But on both ends of the spectrum, the quality requirements are about the same. In simple projects, new devs / consultants can hop on, make changes, and contribute immediately, without having to wade through 6 layers of abstraction to understand what's going on, or risking misunderstanding some complex abstraction and costing down the line. In all cases, there was never a need to actually make code swappable or reusable - and the tests were never actually maintained past the first iteration because requirements changed, it was too time-consuming, deadlines, business pressure, etc etc. So if - in the end - testing and interfaces aren't used rapid development (read: cost-savings) is a priority the project's requirements will be changing a lot while in development ...would it be wrong to recommend a super-simple architecture, even to solve a complex problem, for an enterprise client? Is it complexity that defines enterprise solutions, or is it the reliability, # concurrent users, ease-of-maintenance, or all of the above? I know this is a very vague question, and any answer wouldn't apply to all cases, but I'm interested in hearing from devs / consultants that have been in the business for a while and that have worked with these varying degrees of complexity, to hear if the cool-but-expensive abstractions are worth the overall cost, at least while the project is in development.

    Read the article

  • Black login screen Ubuntu 12.04 if WGA cable pluged in on reboot

    - by Sulliwane
    I'm using Ubuntu 12.04.1, 64 bits, installed on a Z77 Pro4 (ASrock motherboard), crucial M4 SSD drive (sata 3), and intel i5 3570k (ivy bridge). I have this annoying problem : When I startup the computer, I get a CLI login prompt : At this moment, if I press enter, i get the usual CLI login prompt. If not, here is what I get : From now, if I login using CLI, i identify the lightdm processus, kill and start it : #ps -A | grep lightdm #sudo kill -9 1273 #sudo lightdm and miracle, these commands bring back the gui login screen. BUT It's very annoying as I have to repeat these steps at every boot, and the people using this desktop are not familiar with linux at all! So I tried to figure out the cause and here is what I found : If, when I shutdown the computer, the WGA cable is not pluged in, then Ubuntu will boot on GUI login screen without a glitch! But If the WGA cable is pluged in when shuting down, I will get CLI login prompt... Note 1: I installed linux kernel 3.4, but it hasn't solve the problem. Note 2: Is it linked to the new HD 4000 integrated graphic processor ? Note 3: If i boot on an USB stick (Ubuntu 12.04), NO problems ! Note 4: If booting on the SSD, when clicking "shutdown" button, the shutdown process never ends up (logout screen keep displaying and fans are still rolling). But if booting on USB stick, the shutdown action runs properly.

    Read the article

  • Can't install Linux drivers for ASUS N-13 wireless adapter

    - by jcc
    I have a USB N13 wireless Adapter with install CD-- For Windows. I downloaded drivers from ASUS FOR N13 for Linux. Disregard install CD that came with adapter; it's for Windows. I then downloaded Windows Wireless driver install program app from Software Center in Ubuntu 12.10. The problem is me. I am newbie with all things linux; software sources, G Debi, default archive manager, synaptic package manager and the Terminal. The downloaded driver file is a .zip file. I managed to extract it to a tar.gz file and then to open it to the contained files. When I use the Windows Wireless driver program it ends up telling me there is no .inf file and goes no further. It wants to install .inf file but I don't even see one in all the files. Can someone please help me . I think you can tell by my wording I don't have a clue. I hope this is'nt too chatty. I've tried to be explicit and to the point. Thank you. Oh, this is on an ASUS LAPTOP K53E. I've looked all over Ask Ubuntu and finally found some questions even on the N13 but they didn't help; still some differences in the exact problem.

    Read the article

  • What kinds of issues can one expect when changing a domain names registar? (3 questions)

    - by anonymous-one
    Assuming that there are no 'unusual' items that come up, what kind of disruptions can one expect when moving a domain between registrars? I understand some of the below may vary over registrars. But assuming both ends are large proficient registrars: a) Will the NS settings be mirrored? We use a dedicated dns service provider so we are not using the originating registrars name servers. All that we are concerned about is that the existing NS values are mirrored at the target registrar. b) Are incoming domain transfers automated on the target registrar end? Eg: If we begin the transfer process during business hours at the source registrar, will someone have to manually approve the inbound transfer (most likely during their business hours) at the target registrar? c) Is the domain ever 'in limbo'? At any time in the process is there ever a time when the NS values for the domain are not populated (as they were prior to initiating the transfer) OR one does not have access to populate them (at the target registrar)? Thank you kindly for the help.

    Read the article

  • How do I throttle a command in a terminal window?

    - by To Do
    I needed to run convert with a lot of images at the same time. The command took quite a while but this doesn't bother me. The issue is that this command rendered my computer unusable while the command was running (for about 15 minutes). So is it possible to throttle the command by limiting resources (processor and memory) to the command, directly from the command line? This can only work if I add something to the same line before pressing Enter because once I start the process the computer slows so much that it is impossible for example to switch to "System monitor" and reduce priority. Edit: top and iotop results I managed to run top and sudo iotop >iotop.txt while doing one of these convert operations. (The iotop.txt file produced is difficult to read) Results of top: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 14275 username 20 0 4043m 3.0g 1448 D 7.0 80.4 0:16.45 convert Results of iotop: [?1049h[1;24r(B[m[4l[?7h[?1h=[39;49m[?25l[39;49m(B[m[H[2JTotal DISK READ: 1269.04 K/s | Total DISK WRITE:[59G0.00 B/s (B[0;7m TID PRIO USER DISK READ DISK WRITE SWAPIN(B[0;1;7m IO(B[0;7m COMMAND [3;2H(B[m2516 be/4 username 350.08 K/s 0.00 B/s 0.00 % 0.00 % zeitgeist-datahub 7394 be/4 username 568.88 K/s 0.00 B/s 77.41 % 0.00 % --rendere~.530483991[5;1H14275 idle username 350.08 K/s 0.00 B/s 37.49 % 0.00 % convert S~f test.pdf[6;2H2048 be/4 root[6;24H0.00 B/s 0.00 B/s 0.00 % 0.00 % [kworker/3:2] [5G1 be/4 root[7;24H0.00 B/s 0.00 B/s 0.00 % 0.00 % init Furthermore, even after the process ends, the computer does not return to the previous performance. I found a way around this by running sudo swapoff -a followed by sudo swapon -a

    Read the article

  • String manipulation functions in SQL Server 2000 / 2005

    - by Vipin
    SQL Server provides a range of string manipulation functions. I was aware of most of those in back of the mind, but when I needed to use one, I had to dig it out either from SQL server help file or from google. So, I thought I will list some of the functions which performs some common operations in SQL server. Hope it will be helpful to you all. Len (' String_Expression' ) - returns the length of input String_Expression. Example - Select Len('Vipin') Output - 5 Left ( 'String_Expression', int_characters ) - returns int_characters characters from the left of the String_Expression.     Example - Select Left('Vipin',3), Right('Vipin',3) Output -  Vip,  Pin  LTrim ( 'String_Expression' ) - removes spaces from left of the input 'String_Expression'  RTrim ( 'String_Expression' ) - removes spaces from right of the input 'String_Expression' Note - To removes spaces from both ends of the string_expression use Ltrim and RTrim in conjunction Example - Select LTrim(' Vipin '), RTrim(' Vipin ') , LTrim ( RTrim(' Vipin ')) Output - 'Vipin ' , ' Vipin' , 'Vipin' (Single quote marks ' ' are not part of the SQL output, it's just been included to demonstrate the presence of space at the end of string.) Substring ( 'String_Expression' , int_start , int_length ) - this function returns the part of string_expression. Right ( 'String_Expression', int_characters ) - returns int_characters characters from the right of the String_Expression.

    Read the article

  • How to Structure a Trinary state in DB and Application

    - by ABMagil
    How should I structure, in the DB especially, but also in the application, a trinary state? For instance, I have user feedback records which need to be reviewed before they are presented to the general public. This means a feedback reviewer must see the unreviewed feedback, then approve or reject them. I can think of a couple ways to represent this: Two boolean flags: Seen/Unseen and Approved/Rejected. This is the simplest and probably the smallest database solution (presumably boolean fields are simple bits). The downside is that there are really only three states I care about (unseen/approved/rejected) and this creates four states, including one I don't care about (a record which is seen but not approved or rejected is essentially unseen). String column in the DB with constants/enum in application. Using Rating::APPROVED_STATE within the application and letting it equal whatever it wants in the DB. This is a larger column in the db and I'm concerned about doing string comparisons whenever I need these records. Perhaps mitigatable with an index? Single boolean column, but allow nulls. A true is approved, a false is rejected. A null is unseen. Not sure the pros/cons of this solution. What are the rules I should use to guide my choice? I'm already thinking in terms of DB size and the cost of finding records based on state, as well as the readability of code the ends up using this structure.

    Read the article

  • Advice on designing web application with a 40+ year lifetime

    - by user2708395
    Scenario Currently, I am apart of a health care project whose main requirement is to capture data with unknown attributes using user generated forms by health care providers. The second requirement is that data integrity is key and that the application will be used for 40+ years. We are currently migrating the client's data from the past 40 years from various sources (Paper, Excel, Access, etc...) to the database. Future requirements are: Workflow management of forms Schedule management of forms Security/Role based management Reporting engine Mobile/Tablet support Situation Only 6 months in, the current (contracted) architect/senior programmer has taken the "fast" approach and has designed a poor system. The database is not normalized, the code is coupled, the tiers have no dedicated purpose and data is starting to go missing since he has designed some beans to perform "deletes" on the database. The code base is extremely bloated and there are jobs just to synchronize data since the database is not normalized. His approach has been to rely on backup jobs to restore missing data and doesn't seem to believe in re-factoring. Having presented my findings to the PM, the architect will be removed when his contract ends. I have been given the task to re-architect this application. My team consists of me and one junior programmer. We have no other resources. We have been granted a 6-month requirement freeze in which we can focus on re-building this system. I suggested using a CMS system like Drupal, but for policy reasons at the client's organization, the system must be built from scratch. This is the first time that I will be designing a system with a 40+ lifespan. I have only worked on projects with 3-5 year lifespans, so this situation is very new, yet exciting. Questions What design considerations will make the system more "future proof"? What experiences have you had in designing such systems - both failures and successes? What questions should be asked to the client/PM to make the system more "future proof"?

    Read the article

  • How to make a text search template?

    - by Flipper
    I am not really sure what to call this, but I am looking for a way to have a "template" for my code to go by when searching for text. I am working on a project where a summary for a piece of text is supplied to the user. I want to allow the user to select a piece of text on the page so that the next time they come across a similar page I can find the text. For instance, lets say somebody goes to foxnews.com and selects the article like in the image below. Then whenever they go to any other foxnews.com article I would be able to identify the text for the article and summarize it for them. But an issue I see with this is for a site like Stack Exchange where you have multiple comments to be selected (like below) which means that I would have to be able to recursively search for all separate pieces of text. Requirements Be able to keep pieces of text separate from each other. Possible Issues DIV's may not contain ids, classes, or names. A piece of text may span across multiple DIVs How to recognize where an old piece of text ends and a new begins. How to store this information for later searching?

    Read the article

  • Dealing with Fine-Grained Cache Entries in Coherence

    - by jpurdy
    On occasion we have seen significant memory overhead when using very small cache entries. Consider the case where there is a small key (say a synthetic key stored in a long) and a small value (perhaps a number or short string). With most backing maps, each cache entry will require an instance of Map.Entry, and in the case of a LocalCache backing map (used for expiry and eviction), there is additional metadata stored (such as last access time). Given the size of this data (usually a few dozen bytes) and the granularity of Java memory allocation (often a minimum of 32 bytes per object, depending on the specific JVM implementation), it is easily possible to end up with the case where the cache entry appears to be a couple dozen bytes but ends up occupying several hundred bytes of actual heap, resulting in anywhere from a 5x to 10x increase in stated memory requirements. In most cases, this increase applies to only a few small NamedCaches, and is inconsequential -- but in some cases it might apply to one or more very large NamedCaches, in which case it may dominate memory sizing calculations. Ultimately, the requirement is to avoid the per-entry overhead, which can be done either at the application level by grouping multiple logical entries into single cache entries, or at the backing map level, again by combining multiple entries into a smaller number of larger heap objects. At the application level, it may be possible to combine objects based on parent-child or sibling relationships (basically the same requirements that would apply to using partition affinity). If there is no natural relationship, it may still be possible to combine objects, effectively using a Coherence NamedCache as a "map of maps". This forces the application to first find a collection of objects (by performing a partial hash) and then to look within that collection for the desired object. This is most naturally implemented as a collection of entry processors to avoid pulling unnecessary data back to the client (and also to encapsulate that logic within a service layer). At the backing map level, the NIO storage option keeps keys on heap, and so has limited benefit for this situation. The Elastic Data features of Coherence naturally combine entries into larger heap objects, with the caveat that only data -- and not indexes -- can be stored in Elastic Data.

    Read the article

  • JSR Updates and EC Meeting Tuesday @ 15:00 PST

    - by Heather VanCura
    JSR 310, Date and Time API, has moved to JCP 2.9 (first JCP 2.9 JSR!) JSR 236, Concurrency Utilities for Java EE, has published an Early Draft Review. This review ends 15 December 2012.  Tomorrow, Tuesday 20 November is the last Public EC Meeting of 2012, and the first EC meeting with the merged EC. The second hour of this meeting will be open to the public at 3:00 PM PST. The agenda includes  JSR 355,  EC merge implementation report, JSR 358 (JCP.next.3) status report, JCP 2.8 status update and community audit program.  Details are below. We hope you will join us, but if you cannot attend, not to worry--the recording and materials will also be public on the JCP.org multimedia page. Meeting details Date & Time Tuesday November 20, 2012, 3:00 - 4:00 pm PST Location Teleconference Dial-in +1 (866) 682-4770 (US) Conference code: 627-9803 Security code: 52732 ("JCPEC" on your phone handset) For global access numbers see http://www.intercall.com/oracle/access_numbers.htm Or +1 (408) 774-4073 WebEx Browse for the meeting from https://jcp.webex.com No registration required (enter your name and email address) Password: JCPEC Agenda JSR 355 (the EC merge) implementation report JSR 358 (JCP.next.3) status report 2.8 status update and community audit program Discussion/Q&A Note The call will be recorded and the recording published on jcp.org, so those who are unable to join in real-time will still be able to participate.

    Read the article

  • PyGTK/Quickly Add string to ListStore

    - by AllRadioisDead
    I'm trying to build an application that will prompt the user for a string, and then add that string to a Scrolling Listview object using quickly and PyGTK. I've been following this tutorial: http://developer.ubuntu.com/resources/app-developer-cookbook/multimedia/creating-a-simple-media-player/ When I hit the add button, the prompt comes up properly and I'm able to enter the string. The column appears correctly but the list ends up being blank. What am I doing wrong? import gettext from gettext import gettext as _ gettext.textdomain('spiderweb') from gi.repository import Gtk # pylint: disable=E0611 import logging logger = logging.getLogger('spiderweb') from spiderweb_lib import Window from spiderweb.AboutSpiderwebDialog import AboutSpiderwebDialog from spiderweb.PreferencesSpiderwebDialog import PreferencesSpiderwebDialog from quickly import prompts from quickly.widgets.dictionary_grid import DictionaryGrid import os # See spiderweb_lib.Window.py for more details about how this class works class SpiderwebWindow(Window): __gtype_name__ = "SpiderwebWindow" def finish_initializing(self, builder): # pylint: disable=E1002 """Set up the main window""" super(SpiderwebWindow, self).finish_initializing(builder) self.AboutDialog = AboutSpiderwebDialog self.PreferencesDialog = PreferencesSpiderwebDialog # Code for other initialization actions should be added here. self.supported_web_formats = [".net",".html", ".com"] def on_addbutton_clicked(self, widget, data=None): #let the user choose a path with the directory chooser response, string = prompts.string("Enter a string", "Please enter string:", "Sample Text") #make certain the user said ok before working if response == Gtk.ResponseType.OK: #make a list of the supported media files media_files = Gtk.ListStore(str) #add a dictionary to the list of media files media_files.append({"String":string}) #remove any children in scrolled window for c in self.ui.scrolledwindow1.get_children(): self.ui.scrolledwindow1.remove(c) #create the grid with list of dictionaries #only show the File column media_grid = DictionaryGrid(media_files, keys=["File"]) #show the grid, and add it to the scrolled window media_grid.show_all() self.ui.scrolledwindow1.add(media_grid)

    Read the article

  • Good links somehow being converted to ones with a PHP redirect (not a virus)

    - by Rebecca
    This has happened to links we put on web pages and in emails. We might put www.oursite.org/work/ but when I view source it shows up as webmail.ourhosting.ca/hwebmail/services/go.php?url=https%3A%2F%2Fwww.oursite.org%2F%2work%2F This ends up at the webmail login page for our web host. But only some of the people who click the link get the login page; others go directly to the original page we intended. We don't want it to go to the webmail login page, nobody needs to log in to our web site. This occurs for links to pages on our site, but also to links to other sites that we put in emails or in posts. It seems to be browser independent as well as e-mail client independent as we variously have used Firefox and Chrome as well as MS Outlook and Thunderbird. I've tried to resolve the issue with our webhost but they keep telling me they don't support our browser, or our email client (i.e., they don't understand the issue). At the moment, our only option is to try another web host just to get rid of their login. Any ideas about what's going on?

    Read the article

  • How do I fix "Ubuntu is running in low-graphics mode?"

    - by Tortoise
    First off, I'm running Ubuntu 10.04 on a 30gb partition, the rest of my hdd is for a vista partition. The way I installed this was, I shrunk the vista partition and installed Ubuntu in the largest block of free space. Ubuntu has been working fine for a few weeks, and I've loved it, but today I was doing something in Vista (something simple) and I restarted to go back into ubuntu, and when it tried to boot up I got a message that said: "Ubuntu is running in low-graphics mode. Your screen, graphics card, and input devices could not be detected correctly. You will have to configure these yourself." I click OK, and it gives me a few options but all of them are dead ends. Basically, I'm stuck in CLI right now without a clue of how to fix it. I've tried doing a full update and it hasn't made a difference. I've already been asking for help in #Ubuntu and #Radeon and I was directed by some of them here, so I hope I can find some answers here. Also, I'm using an ATI Radeon X1200. Any help would be greatly appreciated. Another thing, while I was trying to get help in #radeon I was told that it could possibly be this bug.

    Read the article

  • How to start a Software Company

    - by MeshMan
    I've always been interested in wondering how software companies happen. I find it extremely difficult once you're tied down with car, house, life etc. Funding is always the biggest concern. To make this a bit more specific, I see two types. Those offering a product/service or those offering a consultancy company. One things that bugs me about the product/service kind is that we all know how burning the candle at both ends is extremely exhausting. Coding for 8-10 hours in the day and then code in the evenings on your own stuff, doesn't last long. No matter how passionate you are about your idea, simply put, coding day and night is a recipe for burn out. Is this a defeatist attitude though? Can it be balanced? A consultancy kind isn't as tricky in my honest opinion. I think once you have spent years and years in the industry building up relationships, contacts from contracting or moving around, and of course, being involved in the community, then landing your first project as a consultant I'm sure is easier than the product/service kind. I'd imagine friends then could join you as you take on bigger company projects, like an Agile implementation or TDD training, then off you go gaining bigger things. Could you please specify which company type you're answering if you can't contribute to both. I'd like to hear everyone's experiences or ideas on any level for software company start-ups.

    Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >