Search Results

Search found 14951 results on 599 pages for 'connect by'.

Page 347/599 | < Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354  | Next Page >

• How to disable "Automatically search for drivers and install" in Windows 7

  - by raegadfsgfsdg

  I connected my TI-89 to my Windows 7 system, and apparently it is not plug-and-play. There was a link to a Windows configuration setting made available that gave the option to automatically search their windows site for drivers and automatically install them each time i connect an unrecognized device. Well, I selected that link with the intention of it being temporary and just that one time. That didnt work and the location/install of a driver was not successful. How can I reset that setting to not automatically install whatever drivers it thinks might be fitting? I cannot find that configuration setting when I looked for it recently.

  Read the article

• How to configure a gateway virtual machine

  - by user225706

  I have a VM-host configured with eth0 (10.145.73.207) and eth1(192.168.101.231), and three VMs connecting the Internet through NAT, with the default gateway of 192.168.122.1. Now I want to configure VM2 as a gateway. I added eth0 (192.168.122.63) and eth1 (172.16.1.109) for VM2. It can connect to the Internet with each of them. I changed the default gateway of VM1 from 192.168.122.1 to 192.168.122.63. However, when I traceroute google.com on VM1, it shows that the packet only reaches 192.168.122.63, no further. Any help is appreciated. Thanks.

  Read the article

• JDBC Connection Pools in Glassfish

  - by Dana Singleterry

  I've been attempting to configure Glassfish 3.1.2.2 for ADF 11g and the need arose to create a jdbc connection pool to my Oracle XE 11g database. While this is really very trivial there were no samples of how to do this and documentation, while good, rarely ever provides concrete examples. After fumbling around for a few minutes searching for an example I gave up and figured it out on my own. Here are the steps for any of you that may be in need. This can be done either via the Glassfish command line tool asadmin or through the admin console. I'm doing this through the admin console. Start Glassfish and connect to the admin console with the credentials you defined at installation: http://localhost:4848 Navigate to Resources | JDBC | JDBC Connection Pools and select New. Be sure to enter Resource Type & Datasource Classname under General Settings tab. You can go with the defaults for Pool Settings etc... View Image Go to the Additional Properties tab and create username, password, and url properties with the respective values. View Image Navigate to Resources | JDBC | JDBC Resources and select New. Be sure to enter the JNDI Name and select the Pool Name for the jdbc connection pool you created previously. View Image Navigate to Configurations | server-config | JVM Settings and select the JVM Options tab. Add the values highlighted: -Doracle.jdbc.J2EE13Compliant=true is used to make sure the driver behaves in a JEE-compliant manner. View Image To integrate the JDBC driver into a GlassFish Server domain, copy the JAR files into the domain-dir/lib directory, then restart the server. The JAR file for the Oracle 11 database driver is ojdbc6dms.jar. An upcoming entry will demonstrate configuring Glassfish for Oracle ADF Applications.

  Read the article

• don't have "sufficient right" to my own TFS 2010

  - by soultaker

  after I removed an active directory domain service, I lost all my accounts...then not only the SQL server and the TFS stopped working, the TFs administration console also says that I don't have sufficient right to add members... Now I manage to get the SQL server kind of running, and I can see my project in team explorer, but the TFS still says SQL access denied, SQL server says I don't have permission to add new logins or add my admin account to sysadmin, the TFS still give me the TF246017 tfs could not connect to the database and I don't have sufficient right to add member to any of the project groups... Anybody knows how can I get all these permissions back....?

  Read the article

• Mapping drives on MacOSX (Leopard/Snow Leopard) permanently inside LAN

  - by Shyam

  Hi, How do I "map" shared folders on a Mac, permanently? With map, I do not mean 'connect', but permanently add it to the system so it exists after reboot. Since workstations tend to shutdown, I wonder also the symptoms and cures in case that happens. In Linux, this can be done using the fstab file, but I noticed that volumes are mounted in a different structure than Linux. I need this to backup some workstations, doing a recursive job over a single directory, that should contain the shared folders. I use Terminal to access the main system, so by preference, the solution would be nice that works within a bash shell vs GUI. I can access all folders in Finder. Thanks!

  Read the article

• Win7 to Win7 Remote Desktop Not working, Xp to 7 working fine

  - by vlad b.

  Hello, I have a small home network and recently i tried to enable remote desktop for one of the pc's. I have a mix of Windows 7, Windows Vista and Xp runing alongside ubuntu, centos and others (some virtual, some real). I have a few Windows 7 pc`s that can be connected to using remote desktop from inside and outside the network (port redirects on routers, etc, etc) and some Xp ones. The trouble is when i tried to do the same thing to a Win7 laptop i discovered i can't connect to it from another win7 pc inside the home network. To sum it up Working: xp -- win7 not working: win7 -- win7 What i tried - disable and enable remote desktop (my computer - remote settings) - removing and adding users to the remote settings window - adding a new user to the machine, administrator or 'normal' user - checking the firewall settings on the machine and set 'allow' to remote desktop for both 'home/work' and 'public'networks Any tips on what should i do next? It displays ' .. secure connection' and after that the window with 'Your security credentials did not work' and it lets me try again with another user/password..

  Read the article

• Multi-Tenant VMWare View Deployment

  - by SimonJGreen

  We have VMWare View 5 set up for a single tenant environment, absolutely brilliant and works perfectly. Two thumbs up there! We're looking at the possibility of deploying this in a multi tenant scenario, where multiple unlinked companies connect to a VDI solution hosted by us but have no visibility of each other. Obviously;y this could be achieved by doubling up on all the components, having a complete VMWare View stack for each tenant, but this seems a little bit messy. Has anyone done this before, and if so how? Googling sheds little light apart from this experts exchange topic.

  Read the article

• How to dismiss the Windows 8.1 Upgrade banner?

  - by user81430

  As of today, my Windows 8 system is displaying a large banner covering about a quarter of the screen, demanding that I upgrade to Windows 8.1 for free. The banner helpfully informs me that that I can continue to use the computer while the upgrade is downloading. There's a button to go to the store for the upgrade, but no other choices, such as No Thanks, Maybe Later, or Absolutely Not. I can't find a way to dismiss the banner, and I can start programs but can't give them focus while the banner is present. So I'm dead in the water. How can I fix this? Bringing up Task Manager doesn't give me any options. My employer doesn't yet support Windows 8.1 (which is also an issue, but beyond my control) so I won't be able to connect to work if install the upgrade. So there is no way on God's green earth that I'm going to install this upgrade now.

  Read the article

• How to use WeirdX applet instead of X11 for remote connections in Mac OS X?

  - by penyuan

  When I am away, I've got an Apple PowerBook set up to use X11 forwarding with SSH to connect to a remote iMac client in my room for server administration. Whenever I start X client programs on the client iMac, X11 would start on my PowerBook, which is OK, but... Question: Is it possible to change my settings so I can use the WeirdX (a web-based java X server) applet to take care of the X client programs instead of Mac OS X's default X11? Is there a config file I can edit to chance the $DISPLAY variable, and what should I set it to? Is this even the issue? Thank you very much.

  Read the article

• Configuring WPA2-Enterprise with Freeradius

  - by Vincent O.

  I'm trying to set up an authenticated wifi network with Freeradius. I've managed to get things working using self-signed certs etc. The problem is Windows clients need to uncheck the "Automatically use my windows logon name and password [etc.]" option in the MSCHAPv2 settings. When I connect to my local university with Eduroam, it automatically asks for a username and password instead of sending windows login credentials. How did the sysadmins accomplish this? Is it some kind of RADIUS Attribute that gets sent back?

  Read the article

• what does AngleVectors method in quake 3 source code does

  - by kypronite

  I just downloaded quake 3 for learning purposes. I know some of some linear algebra(basic vector math ie: dot,cross product). However I can't decipher what below method does, I know what is yaw,pitch and roll. But I can't connect these with vector. Worse, I'm not sure this fall under what math 'category', so I don't really know how to google. Hence the question here. Anyone? void AngleVectors( const vec3_t angles, vec3_t forward, vec3_t right, vec3_t up) { float angle; static float sr, sp, sy, cr, cp, cy; // static to help MS compiler fp bugs angle = angles[YAW] * (M_PI*2 / 360); sy = sin(angle); cy = cos(angle); angle = angles[PITCH] * (M_PI*2 / 360); sp = sin(angle); cp = cos(angle); angle = angles[ROLL] * (M_PI*2 / 360); sr = sin(angle); cr = cos(angle); if (forward) { forward[0] = cp*cy; forward[1] = cp*sy; forward[2] = -sp; } if (right) { right[0] = (-1*sr*sp*cy+-1*cr*-sy); right[1] = (-1*sr*sp*sy+-1*cr*cy); right[2] = -1*sr*cp; } if (up) { up[0] = (cr*sp*cy+-sr*-sy); up[1] = (cr*sp*sy+-sr*cy); up[2] = cr*cp; } } ddddd

  Read the article

• After installing Win7 on my laptop I'm having trouble extending the desktop to an external monitor

  - by devoured elysium

  I have a HP TX2000 laptop and a HP w2408 screen. Yesterday, I installed Win7 and I'm having trouble having the 24 inches screen work as a secondary screen. It seems like my laptop cannot detect both screens (its own and the 24 inches one). I think I already have all the drivers installed (I ran Win7's tool to detect and automatically update drivers and it said everything was up to date!), so what might be the problem? If I connect the 24 inch screen to my laptop, it will happily show a copy of what is being shown on that big screen too, but I'd like to have it ''extend'' the desktop to the big screen, instead.

  Read the article

• Change the order of DNS lookup when connected in the VPN

  - by qwerty2010

  Using Windows 7 Pro here. I have my LAN network adapter with DNS server 8.8.8.8 (Google's DNS). I also have OpenVPN client to connect to my company's network. If I type "nslookup" while disconnected from the VPN, I get 8.8.8.8 (from my LAN network adapter). If I type "nslookup" while connected in the VPN, I get the DNS IP from my company's network. That makes me think that when connected to the VPN all DNS's resolution are routed first to my company's DNS. How can I change this order, and make the DNS resolution be routed to 8.8.8.8 first, when I'm connected to the VPN? Thank you

  Read the article

• How to send Windows key over VNC to Linux from Windows?

  - by MJBoa

  Alright, so I'm running Linux with AwesomeWM on my home machine. I'm running x11vnc on that machine and I want to connect to it from a windows machine. So it suffices to say that I need the Windows key for my home machine to function. I really like TightVNC, but I have found that only RealVNC is able to send the Windows key presses that I need. My problem is that RealVNC is sorely lacking customization and I feel it's inferior to TightVNC and unusable. I know that Ctrl-Esc sends the windows key press in Tight but then I can't use it as a modifier key. Useless. Anyone have any ideas? I don't think it's a server issue since I've tried Tightvnc server on the linux machine and it still doesn't work, at least in TightVNC. It works with Real anyway. Oh and UltraVNC doesn't work either.

  Read the article

• At what year in history was computers first used to store porn? [closed]

  - by Emil H

  Of course this sounds like a joke question, but it's meant seriously. I remember being told by an old system administrator back in the early nineties about people asking about good FTPs for porn, and that they would as a joke always tell them to connect to 127.0.0.1. They would come back saying that there was a lot of porn at that address, but that oddly enough it seemed like they already had it all. Point being, it seems like it's been around for quite a while. Anyway. Considering that a considerable portion of the internet is devoted to porn these days, it would be interesting to know if someone has any kind of idea as to when and where the phenomena first arose? There must be some mention of this in old hacker folk lore? (Changed to CW to emphasize that this isn't about rep, but about genuine curiousity. :)

  Read the article

• silent failure while creating odbc data source

  - by Peter

  I just got really confused trying to create an ODBC data source in Windows 2003 R2. I can create a connection to my chosen server (a MS SQL Server) on the "user DSN" tab, but when I try to do the same thing on the "system DSN tab", the process fails but without an error message. I am able to connect to the target database fine at the end of configuring a new data source, but when I click OK, the data source just isn't there. No error message, no sign that anything went amiss, other than the lack of a new data source. Very annoying, as I had to repeat the process a few times to make sure I wasn't crazy. Anybody got any hints? I suspect it is a permission problem of some sort but since there is no error message, I don't know where to start.

  Read the article

• Podcast Show Notes: Red Room Interview &ndash; Part 3: Ninja BPM

  - by Bob Rhubart

  The third and final segment of my conversation with Red Room bloggers Sean Boiling, Richard Ward, and Mervin Chaing is now available. Listen to Part 1 Listen to Part 2 Listen to Part 3 As you’ll hear, this segment gets its title from another example of Mervin’s tactic for tweaking terminology to make it easier to sell stakeholders on certain SOA concepts. These are some very bright, very knowledgeable guys, so I encourage you to connect with them via the links below to pick their brains on any SOA or related issues that might have you reaching for the aspirin bottle. Sean Boiling - Sales Consulting Manager for Oracle Fusion Middleware LinkedIn | Twitter | Blog Richard Ward - SOA Channel Development Manager at Oracle LinkedIn | Blog Mervin Chiang - Consulting Principal at Leonardo Consulting LinkedIn | Twitter | Blog Once again, you’ll find the complete list of Red Room SOA Best Practice Posts in here. Up Next Next week’s program features another panel discussion recorded during a virtual min meet-up. The panel includes Oracle ACE Directors Mike van Alst (IT-Eye) and Jordan Braunstein (TUSC) along with The Definitive Guide to SOA: Oracle Service Bus author Jeff Davies. Stay tuned: RSS   Technorati Tags: oracle technology network,oracle,archbeat,podcast. arch2arch,soa,bpm del.icio.us Tags: oracle technology network,oracle,archbeat,podcast. arch2arch,soa,bpm

  Read the article

• Unknown MySQL server host - connection problem

  - by Zukas

  I am new to databases and I have been asked to look at a few tables and see how many records they have and some other information. I cannot access phpMyAdmin through cPanel, which is how I've always done it on my own server. I decided to download MySQL Workbench. I enter in all the information is asks: Hostname: mysite.startlogicmysql.com Port: 3306 Username: user. I press connect and get this Unknown MySQL server host 'mysite.startlogicmysql.com' (11004) Am I using the wrong hostname? I've seen a server name, a hostname in the server variables list which is something like custsql.eigbox.net and the server itself is custsql.eigbox.net In both cases the custsql is a little different than what I posted. I am not sure which one to use. If there is anything else anyone needs to know I can tell you. Tanks.

  Read the article

• Reverse rdesktop or VNC overlay image!

  - by carlesso

  Hi all. I've got a central server (linux based) and many clients (Windows XP Embedded, afaik) in public places around my country. I need to have these clients to connect to the server with a "reverse" tunnel, that is to say that I need to control the clients from the server but the connection is initialized by clients. The requirement is that, during the connection, an overlay image (or something like that, like a modified version of login screen) is displayed. Some stuff like "Work In Progress". My first idea was to use vncviewer -listen and vnc in reverse mode, but cannot understand how to obfuscate the work I'm doing. Other idea was to use rdesktop in "reverse" mode, but it seems it does not support it. Using rdekstop reverse seems the nicest solution (I can login back the user was in before connection, the login manager - which I can modified - is displayed), but any hint will be appreciated! Thanks in advance!

  Read the article

• Perl not working with Nginx via fastcgi, cannot decipher error logs

  - by ProfessionalAmateur

  Im running CentOS 6.2, Nginx 1.2.3 following these Linode Instructions to get Perl to work with Nginx I've done everything upto the point of testing an actual Perl file. When I do this the browser says: The page you are looking for is temporarily unavailable. Please try again later. And my Nginx error-log shows the following: 2012/09/02 22:09:58 [error] 20772#0: *1 connect() failed (111: Connection refused) while connecting to upstream, client: 192.168.1.102, server: localhost, request: "GET / HTTP/1.1", upstream: "fastcgi://127.0.0.1:8999", host: "192.168.1.10:81" Im stuck at this point. Im not sure if it matters but I also have spawn-fcgi and php-fpm to serve up PHP files on this site, but that should be 100% seperate from the perl-fastcgi setup, different port, etc.. How can I troubleshoot this?

  Read the article

• Gre tunnel Linux Cisco

  - by mezgani

  I've created a GRE tunnel between LAN A and LAN B. LAN A is behind a router, and LAN B is behind a Linux box and this box has a pppoe interface. When i do tcpdump on Linux box i see that the traffic is routerd to Linux box (tunnel end), so my need is routing the tunnel traffic to internet. I've added these rules to my iptables script, and i stay unable to connect to internet from LAN A Permitting Linux to act as router (necessary to forward packets) echo "1" /proc/sys/net/ipv4/ip_forward iptables -A INPUT -p 47 -j ACCEPT iptables -A FORWARD -i ppp0 -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o gre0 -j MASEQUARADE What i've forgot to set in this case?

  Read the article

• Netscreen-Remote Equivalent On Linux

  - by mojah

  We're running a simple Juniper VPN tunnel (using Juniper SSG5's) for outside-network access, which works great for Windows PCs since they can connect using the supplied Netscreen-Remote VPN client. Has anyone successfully managed to get this working under Linux? There are several alternatives, but none seem to actually work. The following were tried, but failed: - http://www.prolixium.com/netscreenlinux - http://david.dw-perspective.org.uk/Juniper-Networks-SSL-VPN-Client-On-Linux.html The official version is no Linux Client will ever be developed by Juniper themselves, but perhaps other (open) software exists that has been found compatible to Juniper's VPN?

  Read the article

• IIS7 Windows Server 2008 FTP -> Response: 530 User cannot log in

  - by RSolberg

  I just launched my first IIS FTP site following many of the tutorials from IIS.NET... I'm using IIS Users and Permissions rather than anonymous and/or basic. This is what I'm seeing while trying to establish the connection... Status: Resolving address of ftp.mydomain.com Status: Connecting to ###.###.##.###:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER MyFTPUser Response: 331 Password required for MyFTPUser. Command: PASS ******************** Response: 530 User cannot log in. Error: Critical error Error: Could not connect to server

  Read the article

• How to back up server with rsync, preserving ownership/permissions without root login

  - by olilarkin

  I am setting up a backup server on which I want to run rsync over ssh to backup content on other servers every night. I would like to set up ssh keys to make it password-less, but I want to preserve ownership of files and permissions. There are a number of users on the server to be backed up which won't all exist on the backup server. What would be the best way to do this? I guess the backup job will need to connect as root to , but I don't want to enable root ssh access on the servers. thanks for any tips, oli ps, all servers are running UBUNTU Server 12.04 LTS and are behind a university firewall.

  Read the article

• Motorola SBG6850 / Linksys WRT54G network problem

  - by user96407

  I am trying to resolve issues with connecting my desktop and LAN capable printer to my network. I recently upgrade to the Motorola Cable Modem Gateway SBG6580 and have TWC coming into it, this works great for wired and wireless connectivity. Although, I am unable to connect to my device from this modem gateway. So, I am trying to cable a Linksys WRT54G (firmware 4.21.4 build 0) to the backside of the SBG6850 so I can use my printer on my network from both my wired desktop and wireless devices. I am pulling wireless off of the SBG6580 and do not want to change this. I have disable the wireless feature on the Linksys WRT54G at this moment. Can someone please help me through this dilemma? I am open to both wired and wireless solutions, but please tell me which approach your sharing in the first line of your response. Cheers!

  Read the article

< Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354  | Next Page >